KIT CR-4. 3mm.13in UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN INCHES NOTES: MADE IN THE U.S.A. U.S. PATENT No. 5,863,128

Transcription

1 NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863, U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR ETHYLENE CHLOROTRIFLUOROETHYLENE (ECTFE) / CONNECTION: 1 1/2" MNPT OR BSPT SUCTION PORT CONNECTION: DEFAULT - 1/2" I.D. TUBING BARB WITH INTEGRATED CHECK VALVE SEAL RING BALL SPRING 1/2" TUBING BARBS (DEFAULT CONNECTION) 1/2" MNPT (ALTERNATE CONNECTION) INJECTOR CAP MAZZEI PART NO.'s: CAP.75 PP CAP.75 PVDF CAP.75 ECTFE CAP.75 N-PVDF ISO CAP.75 PVDF ALTERNATE - 1/2" MNPT - SEE ALTERNATE CAP MODIFICATION DETAIL 1/2" MALE STRAIGHT THREAD 7. FOR INSTALLATION RECOMMENDATIONS REFER TO MAZZEI TECHNICAL BULLETINS No. 4, No. 5, No. 6, No. 1 AND No. 11, WHICH CAN BE FOUND IN THE "KNOWLEDGE CENTER" AT 8. MAZZEI INJECTOR CO., LLC. 5 ROOSTER DR. BAKERSFIELD, CA 9337 TEL: WEB: REMOVE HOSE BARBS FROM CAP AND DISCARD 3mm.13in MAXIMUM STICKOUT 1-1/2" MNPT OR BSPT (TYPICAL) INJECTOR BODY MAZZEI PART NO.'s 1584 PP 1584 PVDF 1584 N-PVDF 1584 ECTFE ISO 1584 PVDF ISO 1584 ECTFE TITLE MATERIAL BALL TEFLON (PTFE) SEAL RING KEL-F (PCTFE) SPRING HASTELLOY C-22 "CAP MODIFICATION DETAIL" (ALTERNATE) 1-1/2" INJECTOR; MODEL PP/PVDF/ECTFE N/A 1:3 NC 1 OF 2

2 (ISOMETRIC VIEW) (FOR REFERENCE ONLY) 279mm 11.in 48mm 1.9in 14mm 5.5in SUCTION PORT 86mm 3.4in 114mm 4.47in MODEL NO. LOCATION (OPPOSITE) FLOW 48mm 1.9in (ACROSS FLATS) 1-1/2" INJECTOR; MODEL PP/PVDF/ECTFE N/A 1:3 NC 2 OF 2

3 NOTES: 1. MADE IN THE U.S.A. 2. U.S. PATENT No. 5,863, U.S. No. 3,852,76 AND INTERNATIONAL REGISTERED TRADEMARKS 4. MATERIAL: GLASS FILLED POLYPROPYLENE (PP) OR POLYVINYLIDENE FLUORIDE (PVDF) OR ETHYLENE CHLOROTRIFLUOROETHYLENE (ECTFE) 1/2" TUBING BARBS (DEFAULT CONNECTION) / CONNECTION: 1-1/2" SANITARY FERRULE SUCTION PORT CONNECTION: DEFAULT - 1/2" I.D. TUBING BARB WITH INTEGRATED CHECK VALVE ALTERNATE - 1/2" MNPT - SEE ALTERNATE CAP MODIFICATION DETAIL SEAL RING BALL SPRING 1/2" MNPT (ALTERNATE CONNECTION) INJECTOR CAP MAZZEI PART NO.'s: CAP.75 PP CAP.75 PVDF CAP.75 ECTFE CAP.75 N-PVDF ISO CAP.75 PVDF 7. FOR INSTALLATION RECOMMENDATIONS REFER TO MAZZEI TECHNICAL BULLETINS No. 4, No. 5, No. 6, No. 1 AND No. 11, WHICH CAN BE FOUND IN THE "KNOWLEDGE CENTER" AT 1/2" MALE STRAIGHT THREAD 8. MAZZEI INJECTOR CO., LLC. 5 ROOSTER DR. BAKERSFIELD, CA 9337 TEL: WEB: REMOVE HOSE BARBS FROM CAP AND DISCARD 3mm.13in MAXIMUM STICKOUT 1-1/2" SANITARY FERRULE (TYPICAL) INJECTOR BODY MAZZEI PART NO.'s 1583 PP 1583 PVDF 1583 N-PVDF 1583 ECTFE ISO 1583 PVDF ISO 1583 ECTFE TITLE MATERIAL BALL TEFLON (PTFE) SEAL RING KEL-F (PCTFE) SPRING HASTELLOY C-22 "CAP MODIFICATION DETAIL" (ALTERNATE) 1-1/2" INJECTOR; MODEL TC 1584-TC PP/PVDF/ECTFE N/A 1:3 NC 1 OF 2

4 (ISOMETRIC VIEW) (FOR REFERENCE ONLY) 14mm 5.5in 279mm 11.in SUCTION PORT 51mm 2.2in 86mm 3.4in 112mm 4.4in MODEL NO. LOCATION (OPPOSITE SIDE) FLOW 1-1/2" INJECTOR; MODEL TC 1584-TC PP/PVDF/ECTFE N/A 1:3 NC 2 OF 2

5 Copyright 214 REV 214 Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA USA PSIG TEL FAX GPM SCFH 47. PSIG GPM SCFH *(4.1) *(51.5) *(8.5) *(13.) *(6.) *(17.) *(21.5) *(68.) *(26.) *(3.5) *(77.) *(35.) *(86.) *(39.5) *(42.5) *(13) 21.8 *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Point). Capacity Performance Table Model 1584

6 Copyright 214 REV 214 Mazzei Company, LLC 5 Rooster Drive, Bakersfield, CA USA TEL FAX kg/cm 2 kg/cm *(.29) *(3.62) *(.6) *(.91) *(4.22) *(1.2) *(1.51) *(4.78) *(1.83) *(2.14) *(5.41) *(2.46) *(6.5) *(2.78) *(2.99) *(7.24) 1.3 *NUMBERS IN PARENTHESIS indicate the injector outlet pressure when suction stops (Zero Point). Capacity - METRIC Performance Table Model 1584