SOUTHWEST OILFIELD PRODUCTS, INC.
|
|
|
- Clarissa Hoover
- 5 years ago
- Views:
Transcription
1 SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR BOMCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼ 6 ½ 6 ¾ 7 MAX-P.S.I F G.P.R R.P.M F MAX-P.S.I G.P.R R.P.M NOTE: I.H.P.= INPUT HORSE POWER S.P.M.= STROKE PER MINUTE P.S.I.= POUNDS PER SQUARE INCH G.P.R.= GALLONS PER REVOLUTION *MAX P.S.I. CALCULATIONS DO NOT EXCEED MAXIMUM FLUID END PRESSURE RATINGS BASED ON 100% VOLUMETRIC EFFICIENCY AND 90% MECHANICAL EFFICIENCY Page 1 of 10
2 VALVE OVER VALVE FLUID END ASSEMBLY FOR BOMCO F-1600 / F-1300 (PISTOL GRIP STYLE LOWER VALVE GUIDE- STANDARD CONFIGURATION ON PUMP) A 8B 8C 8A Page 2 of 10 MODULE FRONT VIEW A A 21B
3 VALVE OVER VALVE FLUID END ASSEMBLY FOR BOMCO F-1600 / F-1300 (CONTINENTAL EMSCO STYLE LOWER VALVE GUIDE) Page 3 of 10 8C 8A 9 7 4A 8B FRONT VIEW OF MODULE
4 FLUID END TYPE MODEL OF PUMP SIZE OF PUMP OEM BOMCO F-1600 / F /2 X 12 ITEM NO. PART DESCRIPTION NO YXX LINER (REFER TO - GUIDE TO ORDERING CHART FOR TYPE (Y) AND FOR SIZE (XX) 3 2 AJO428S LINER AND WEARPLATE SEAL WEARPLATE 3 4 XX-BYY PISTON (REFER TO - GUIDE TO ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY) 3 4A 2932 PISTON BUSHING (FROM 1-5/8 TO 1-1/2 STRAIGHT BORE) PISTON O-RING PISTON ROD (WITH ELASTIC STOP NUT) 3 7 API-4ESN PISTON ROD ELASTIC STOP NUT CWY ROD CLAMP (CONSIST OF 8A, 8B, 8C) 3 8A 1200H30 HOSE (1/2 X 30 WITH 1/2 MALE X 3/8 MALE CONNECTIONS) 3 8B 1286CWYFP14 PIPE (1/2 X 14 GALVANIZED AND THREADED ON ONE END) 3 8C ROD CLAMP BOLT (5/8 X 8 GRADE 8 BOLT WITH LOCK NUT AND WASHER) G74 PONY ROD 3 10 SEE PAGE VALVE 6 11 SEE PAGE VALVE INSERT 6 12 SEE PAGE VALVE SPRING 6 13 SEE PAGE VALVE SEAT 6 SWTM1700 HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION OF CATALOG FOR DETAILS.) CYLINDER HEADTHREADED FLANGE CYLINDER HEAD 3 16 YTSF CYLINDER HEAD PLUG (COMPLETE WITH VALVE GUIDE; SCREWS; AND BUSHING) 3 16* CYLINDER HEAD PLUG (COMPLETE WITH VALVE GUIDE; SCREWS; AND BUSHING) 3 17 AJO495R CYLINDER HEAD PLUG SEAL 3 18 YTSF LOWER VALVE GUIDE ALIGNMENT RING 3 18* LOWER VALVE GUIDE ALIGNMENT RING (EMSCO STYLE SEE PAGE 3 FOR ASSY DRAWING) 3 19 YTSF LOWER VALVE GUIDE (COMPLETE WITH BUSHING) 3 19* LOWER VALVE GUIDE (COMPLETE WITH BUSHING) (EMSCO STYLE SEE PAGE 3 FOR ASSY DRAWING) LOWER VALVE GUIDE BUSHING 3 21 YTSF LOWER VALVE GUIDE RETAINER 3 21* LOWER VALVE LOCK BOLT (EMSCO STYLE SEE PAGE 3 FOR ASSY DRAWING) 3 21A YTSF BI LOWER VALVE GUIDE RETAINER BUSHING 6 21B YTSF BIB LOWER VALVE GUIDE RETAINER BUSHING SCREW 12 *CONTINENTAL EMSCO STYLE PARTS ARE OPTIONAL ON THIS MUD PUMP SEE PAGE 3 FOR ASSEMBLY DRAWING Page 4 of 10 QTY. REQ D
5 FLUID END TYPE MODEL OF PUMP SIZE OF PUMP OEM BOMCO F-1600 / F /2 X 12 ITEM NO. PART NO. DESCRIPTION QTY. REQ D CYLINDER HEAD STUD (WITH SW PART# HHN /2-8 HEAVY HEX NUT) VALVE COVER (COMPLETE WITH UPPER VALVE GUIDE ASSEMBLY) UPPER VALVE GUIDE UPPER VALVE GUIDE RETAINER UPPER VALVE GUIDE RETAINER CAP SCREW AJ1256 VALVE COVER GASKET POWER END STUD (WITH SW PART# HHN /2-8 HEAVY HEX NUT) LINER RETAINER STUD (WITH SW PART# HHN HEX NUT) LINER RETAINER FLANGE LINER RETAINER NUT 3 31A LINER LOCK RING (2-pcs.) 3 31B LINER LOCK O-RING SUCTION MANIFOLD CAP SCREW (WITH LOCK WASHER) SUCTION MANIFOLD (FRONT OR SIDE INLET) SUCTION MANIFOLD GASKET MODULE (STUDDED ONLY) DISCHARGE MANIFOLD DISCHARGE MANIFOLD GASKET DISCHARGE MANIFOLD STUD (WITH SW PART#HHN /4-8 HEAVY HEX NUT) SINGLE LIP PONY ROD SEAL DOUBLE LIP PONY ROD SEAL SPLASH GUARD THRU MODULE STUD (WITH SW PART# HHN /2-8 HEAVY HEX NUT) BFA BLIND FLANGE IS AVAILABLE FOR CAPPING UNUSED FLANGES ON SUCTION MANIFOLD - (8590-6BFA INCLUDES BF BLIND FLANGE AND O-RING) SEE SEPARATE PG. FOR DETAILS **POLYURETHANE SEALS AVAILABLE** Page 5 of 10
6 OEM 5000 PSI BOMCO F-1600 / F-1300 GUIDE TO ORDERING PISTONS LINERS LINER SEALS SIZE FAIL-SAFE DUAL-DURO BLACK CAT GRAYLOY ZIRCONIA RUBBER URETHANE 4" 76BFS 76BDD 76BBC 6390G06 AJO428S AJO428SU 4 1/4" 77BFS 77BDD 77BBC 6390G07 AJO428S AJO428SU 4 1/2" 78BFS 78BDD 78BBC 6390G08 AJO428S AJO428SU 4 3/4" 79BFS 79BDD 79BBC 6390G09 AJO428S AJO428SU 5" 81BFS 81BDD 81BBC 6390G1 6390ZIR1 AJO428S AJO428SU 5 1/4" 82BFS 82BDD 82BBC 6390G2 AJO428S AJO428SU 5 1/2" 83BFS 83BDD 83BBC 6390G3 6390ZIR3 AJO428S AJO428SU 5 3/4" 84BFS 84BDD 84BBC 6390G4 AJO428S AJO428SU 6" 85BFS 85BDD 85BBC 6390G5 6390ZIR5 AJO428S AJO428SU 6 1/4" 86BFS 86BDD 86BBC 6390G6 AJO428S AJO428SU 6 1/2" 87BFS 87BDD 87BBC 6390G7 6390ZIR7 AJO428S AJO428SU 6 3/4" 88BFS 88BDD 88BBC 6390G8 AJO428S AJO428SU 7" 89BFS 89BDD 89BBC 6390G9 6390ZIR9 AJO428S AJO428SU NOTE: DUAL-DURO AND GRAYLOY ARE REGISTERED TRADEMARKS OF SOUTHWEST OILFIELD PRODUCTS. Page 6 of 10
7 TYPE SOUTHWEST (Full Open) FULL OPEN-ROUGHNECK (Cast N Place Insert Valve) FULL OPEN-ROUGHNECK (High Temp) FULL OPEN-ROUGHNECK (w/replaceable Urethane Insert) 3 WEB DOUBLE ANGLE O-RING 3 WEB (High Temp) 3 WEB STANDARD PLATE 4 WEB 4 WEB (High Temp) VALVES & SEATS (OEM BOMCO F-1600) VALVE INSERT SPRING STAINLESS PULLER HEAD SEAT PULLER HEAD SPRING STYLE 777-8B N/A 941 N/A SWTM4250 SPLIT JAW SWND-7V2 N/A SW L N/A SWND-7S1 SWTM40-SN SPLIT JAW SWND-7PH PANCAKE SWND-7V2HC N/A SW L N/A SWND-7S1 SWTM40-SN SPLIT JAW SWND-7PH PANCAKE SWND-7V1 SWND-7I SW L N/A SWND-7S1 SWTM40-SN SPLIT JAW SWND-7PH PANCAKE SWR SWR SWR SWR SWR SWTM3-7T SWR SWR SWR SWR SWR SWTM3-7T 3 J HOOK SWR SWR SWR SWR SWR SWTM3-7T SWU5C-EEF SWUDD-7B SW N/A SW7DD-B1 SWTM4-7 SWU5C-EEFHT SWUDD-7BHT SW N/A SW7DD-B1 SWTM4-7 4 J HOOK PANCAKE SPLIT JAW 3 J HOOK 4 J HOOK Page 7 of 10
8 ITEM NO. PART NO. DESCRIPTION QTY BF SUCTION MANIFOLD BLIND FLANGE O-RING 1 2 FRONT VIEW 1 D 1 D 2 Page 8 of 10 C C BACK VIEW B B A NOTE: 1. THIS FLANGE IS EQUAL TO EMSCO# SW PART# O-RING IS EQUAL TO EMSCO# THIRD ANGLE PROJECTION 4 UNLESS OTHERWISE SPECIFIED: DRAWN BY DATE DIMENSIONS ARE IN INCHES TOLERANCES: MG 06/13/2014 FRACTIONAL 1/64 CHECKED BY DATE ANGULAR: 0.5 DECIMAL / JM 06/17/2014 ALL FILLETS & RADII - 1/16 MAX MATERIAL CHAMFERS 1/16 X 45 MAX SURFACE FINISH 125 RMS MAX N/A CONCENTRICITY NOT TO EXCEED.005 T.I.R. BREAK SHARP CORNERS 1/32 X 45 MAX HEAT TREAT THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SOUTHWEST OILFIELD PRODUCTS. ANY REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF SOUTHWEST OILFIELD PRODUCTS IS PROHIBITED. 3 N/A 2 SOUTHWEST OILFIELD PRODUCTS WALLISVILLE ROAD, HOUSTON,TX TITLE: SUCTION MANIFOLD BLIND FLANGE ASSEMBLY FOR SUCTION MANIFOLD SIZE DWG. NO. REV. B BFA A SHEET 1 OF 1 1 A
9 TORQUE SPECIFICATIONS FOR OEM STYLE FLUID END ASSEMBLY FOR BOMCO F-1600 / F P.S.I. TORQUE TYPE (EXPRESSED IN FOOT-POUNDS) PART NUMBER DESCRIPTION COPPERCOTE MOLY GREASE DRY (NOT RECOMMENDED) API-4 ESN PISTON ROD NUT ROD CLAMP BOLT 150 MAXIMUM CYLINDER HEAD STUD POWER END STUD LINER RETAINER STUD SUCTION MANIFOLD CAP SCREW DISCHARGE MANIFOLD STUD NO MORE FORCE THAN ONE MAN ON 3' WRENCH/CHEATER COMBINATION Page 9 of 10
10 OEM STYLE FLUID END FOR BOMCO F-1600/F-1300 REVISION SUMMARY REVISION DATE REASON OF CHANGE REV. A 4/30/14 UPDATED FLUID-END ASSEMBLY DRAWING REV. B 6/26/14 ADDED BFA DRAWING TO CATALOG, INCLUDED NOTE TO PARTS LIST REV. C 10/20/14 UPDATED FLUID END ASSEMBLY DRAWING AND ADDING A PART NO. TO MAIN PARTS PG REV. D 12/02/15 UPDATE CATALOG WITH PISTOL GRIP STYLE PARTS LIST AND EMSCO STYLE AS AN OPTION 8/29/16 UPDATED CATALOG INCLUDED ITEM NO. 16* & ITEM NO. 16 YTSF CYLINDER HEAD PLUG Southwest Oilfield Products Wallisville Road, Houston, TX Office Page 10 of 10
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8404A FLUID END FOR BOMCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8482-A FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8407-7A FLUID END FOR IDECO T-1600 / T-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8477A FLUID END FOR GARDNER DENVER PZ-11/PZ-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8488-1A FLUID END FOR OILWELL A-1700-PT/A-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE 8475-5 FLUID END FOR GARDNER DENVER PZ-8 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5 ¼ 5 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8422A FLUID END FOR EMSCO F-1000 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5 ¼ 5 ½ 5 ¾ 6 6
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDALE PARTS LIST OEM STYLE FLUID END FOR EMSCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE 8475-5 FLUID END FOR GARDNER DENVER PZ-9 (PZJ) PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8429-7A FLUID END FOR BREWSTER B-1100-T / B-1000-T MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8476-25A FLUID END FOR NATIONAL 12-P-160 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8482-25A FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8432-A FLUID END FOR EWECO E-2200 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 5 5 ½ 6 6 ½ 7 7 ½ 8 8 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8487A FLUID END FOR OILWELL A-1100-PT / A-850-PT PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8429-A FLUID END FOR BREWSTER B-1600-T / B-1300-T MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8490-25ALEW FLUID END FOR LEWCO WH-2214 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 5 5 ½ 6 6 ½ 7 7 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR OILWELL HD-1700-PT/HD-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR WEATHERFORD MP-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8412A FLUID END FOR IDECO T-800 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8477-25A FLUID END FOR GARDNER DENVER PZ-11/PZ-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC. SOUTHWEST FLUID END A FOR WIRTH TPK-1600, 7500 P.S.I. MUD PUMP EXPENDABLE PARTS LIST
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST FLUID END 8446-25A FOR WIRTH TPK-1600, 7500 P.S.I. MUD PERFORMANCE CHART LINER SIZE IN INCHES PUMP MAX MAX STROKE MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST OEM STYLE 8475-5 FLUI EN FOR GRNER ENVER PZ-8 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 4 /2 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼ 6 ½ 6 ¾
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST OL STYLE 876- FLUI EN FOR NTIONL -P-60 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ 5 5 ¼ 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8476-25LEW FLUI EN FOR LEWO W-1712 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 ½ 5 5 ½ 6 6 ½ 7 W-1712 1700 120 MU
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8476-25 FLUI EN FOR NTIONL 12-P-160 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 ½ 4 ¾ 5 5 ¼
TABLE OF CONTENTS DESCRIPTION PAGE
TABLE OF CONTENTS DESCRIPTION PAGE BLOCK-HOOK COMBO...2 ROTARY SWIVEL...3 ROTARY TABLE...4 MKP STYLE SSW-40...5 MKF SERIES TRIPLEX MUD PUMPS... 6-8 MKP-165...9 MKP-275 TRIPLEX MUD PUMP...10 MKP-550 TRIPLEX
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8 FLUI EN FOR GRNER ENVER PZ-/PZ-0 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¼ ½ ¾ 6 6 ¼
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST OEM STYLE FLUI EN FOR GRNER ENVER PZ-/PZ-0 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¼ ½ ¾ 6 6 ¼ 6
Assembly Instructions John Deere EZ View Dust Diverter
Assembly Instructions John Deere EZ View Dust Diverter. Install hinges to bottom front (decal side), approximately from each end. Use Phillips head Screws. (See Picture #). Install 3 / or metal lip (depending
SERVICE MANUAL. PVR15-Manifold Series Pump. J Design Series INSTALLATION. Ordering Code PVR15 - _ RM - _ - - J
SERVICE MANUAL PVR15-Manifold Series Pump Installation, Startup, Operating Instructions, Parts Pages, Repair Procedures J Design Series This service manual applies to products with Ordering Codes like
ABI-180/185 TAIL GEAR ASSEMBLY
INSTALLATION INSTRUCTIONS and INSTRUCTIONS FOR CONTINUED AIRWORTHINESS for the installation of ABI-180/185 for CESSNA AIRCRAFT SERIES 180 & 185 Doc No.: ABI 1-5 REV A 7/10/014 ABI LLC PO Box 670989 0130
WX960 Trailer Log Splitter Parts Manual. S/N & After
WX960 Trailer Log Splitter Parts Manual S/N 36000 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
Serial #
Serial #155000-155999 January 2015 Blank page GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3 EXTENSION ARM ASSEMBLY 4-5 BASKET HANGER, FRAME, & LIFT ASSEMBLY 6-7
26LGC & 26LGC-L Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (59) 99-983 Fax: (59) 99- www.embmfg.com LGC & LGC-L Trailer Log Splitter Parts Manual S/N E9US8ES008 & After Refer to the operators
F-800 and F-1000 MUD PUMP Specification and Performance
This product conform to API Spec 7K, F-800 and F-1000 MUD PUMP Specification and Performance Distributed by 1. Technical Specification and performance Parameter 1.1 F-800 and F-1000 Mud Pumps Specification
Pneumatic Actuator. Operation & Service Manual. Models: Original Instructions UNIBLOC PUMP MANUAL NO.: REVISION: 08/2016
Pneumatic Actuator Operation & Service Manual Models: 43004- MANUAL NO.: 43004- REVISION: 0/206 Original Instructions UNIBLOC PUMP UNIBLOC PUMP Unibloc-Pump, Inc. 0 Ashborough Road Marietta, Georgia 3006
-7 & 2030G2-7 7-BAR SERIES
GENERATION 2 BASKET RAKE MODELS 2027-G2-7 & 2030G2-7 7-BAR SERIES Serial #147000-147999 PARTS MANUAL February 2014 GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3
WX980 Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (9) 99-983 Fax: (9) 99- www.embmfg.com WX980 Trailer Log Splitter Parts Manual S/N E9US0ES3809 & After 3809 & After Refer to the operators
P773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
WX520 Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B 2M0 Canada Ph: (59) 99-9283 Fax: (59) 99- www.embmfg.com WX520 Trailer Log Splitter Parts Manual S/N 2E9USES250328 & After 250328 & After Refer to
Northern Pump Model D1765
PRODUCT INFORMATION PACKET Northern Pump Model 4800-20-D1765 Pump Gears Pump Shafts Pump Cylinder Bearing Plates Liner Plates Shaft Bearings Mounting Brackets Shaft Seal End Plate Pump Studs Aircraft Quality
WX970 Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. 4144 Boomer Line St. Clements, On N0B 2M0 Canada Ph: (519) 699-9283 Fax: (519) 699-4146 www.embmfg.com WX970 Trailer Log Splitter Parts Manual S/N 2E9US1110ES370010 & After 370010
WX510 Trailer Log Splitter Parts Manual S/N to S/N
WX0 Trailer Log Splitter Parts Manual S/N 087 to S/N 000 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing
WX615 Trailer Log Splitter Parts Manual. Starting with S/N to
WX Trailer Log Splitter Parts Manual Starting with S/N 8000 to 800 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service
WX520 Trailer Log Splitter Parts Manual. S/N & After
WX0 Trailer Log Splitter Parts Manual S/N 000 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing
26HVGC-L Trailer Log Splitter Parts Manual
EMB Manufacturing Inc. Boomer Line St. Clements, On N0B M0 Canada Ph: (9) 99-983 Fax: (9) 99- www.embmfg.com HVGC-L Trailer Log Splitter Parts Manual S/N E9US39S0839 & After PRINTED IN CANADA Rev: E.0
Service Manual for Hydraulic Vane Pumps Flange Mounted
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Service Manual for Hydraulic Vane Pumps Flange Mounted SM PSCF/07.03
PARTS BOOK TRIPLEX MUD PUMP WS-1300T
PARTS BOOK TRIPLEX MUD PUMP WS-1300T White Star Pump Co. 22718 Commercial Lane, Tomball, Texas 77375 2010 For parts and service contact White Star sales office 22718 Commercial Lane, Tomball, Texas 77375
SJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING SJV 3400 RPM D VERSION 3/4 WITH GAS ENGINE FLANGE DIMENSIONS MANIFOLD: High strength forged brass for long term use. BOLTS: Three 8mm grade 8.8. PISTONS: Ceramic coated stainless
Authorized Fruitland Vacuum Products Repair Depot ST, Acheson, Alberta, Canada T7X 6A5 T: F:
Authorized Fruitland Vacuum Products Repair Depot 120 10293 276 ST, Acheson, Alberta, Canada T7X 6A5 T: 780.962.1827 F: 780.962.1830 E: sales@fraserwoods.ca www.fraserwoods.ca FM-EPI-201 www.fraserwoods.ca
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INEX - Parts Page rawing page 2 - Fluid End etail page 3 - Piston & Liner etail page 4 - Parts List page 5-10 upagro B.V. 1/10 KA-126FE KA-34 KA-38 KT-34 KA-35 upagro
WX540 Trailer Log Splitter Parts Manual. S/N & After
WX0 Trailer Log Splitter Parts Manual S/N 7000 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and replacing
P844L3MS For Models: NL844L3.1MS1 and NL844L3.1MS2 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P844L3MS For Models: NL844L3.1MS1 and NL844L3.1MS2 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents
RETSCO, Ltd. Shear Relief Valve Catalog. When Quality Counts, Count on RETSCO, Ltd. Check out our website:
RETSCO, Ltd. When Quality Counts, Count on RETSCO, Ltd Shear Relief Valve Catalog 3" 2" Check out our website: www.retscoinc.com Quick Reference for Top Level Assembly Part Number ASSEMBLY PART NUMBER
WX370 Tractor Mount Splitter Parts Manual S/N & After
WX370 Tractor Mount Splitter Parts Manual S/N 900001 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and
WORKFORCE MUD PUMP WORKFORCE PUMP. WORKFORCE TM WWS500 Pump WORKFORCE PUMP
PUMP TM Pump MUD PUMP PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OFFSHORE INDUSTRY TM Reinforced, 36 Kip high strength, stress relieved, alloy-steel Pump Frame provides rigidity
MA-155M(L)(H) TRIPLEX PLUNGER PUMP...
MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed... 450 rpm Stroke length... 4.50 in. 4.3 mm Maximum rated power... 155.0 hp 5.5 kw Maximum rod load... 9087 lbs. 40.3 kn Weight
XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
WX370 Tractor Mount Splitter Parts Manual S/N to S/N
WX370 Tractor Mount Splitter Parts Manual S/N 3709 to S/N 37033 Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service
WX350 Tractor Mount Splitter Parts Manual. S/N & After
WX30 Tractor Mount Splitter Parts Manual S/N 600067 & After Foreword EMB Mfg. has prepared this parts manual to assist customers in ordering quality OEM replacement parts. Proper and regular service and
SERVICE INSTRUCTIONS. Material Pump
TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and
Additions, Revisions, or Updates
1 1 38-13 SUBJECT DATE Inspection of the Main and Connecting Rod Bearings In-Chassis January 2013 Additions, Revisions, or Updates Publication Number / Title Platform Section Title Change Inspection of
AIR WINCH MODEL K6U. Warning! Review WINCH OPERATING PRACTICES Prior to use.
Instructions, Parts and Maintenance Manual AIR WINCH MODEL K6U Warning! Review WINCH OPERATING PRACTICES Prior to use. Always operate, inspect and maintain this winch in accordance with American National
1. DRIVE COUPLINGS TO BE CUSTOMER SPECIFIED. REV 2 DCR# 410, 05/02/11 KA PART # DESCRIPTION QTY. PRICE. 8 FAS09C Flange Secondary Shut-Off Side 1
www.fruitlandmanufacturing.com FM-EPI-201 OPTIONS: A: ITEM 6 & 5 ANGLE DRIVE GEAR BOX 12 6 19 2 7 10 13 OR B: ITEM 12 HYDRAULIC MOTOR BRACKET SEE DWG.# M09C-BOM FOR MUFFLER BOM NOTES: 1. DRIVE COUPLINGS
PARTS LIST FOR MWT MHD WATER TRAILER
PARTS LIST FOR MWT-0510-2MHD WATER TRAILER 1 This Parts Listing has been compiled for your benefit. You can be assured your Mi-T-M Water Trailer was constructed and designed with quality and performance
B/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
Mobile Cylinder Div. Standard Build Series. Catalog HY /US Rev C
Mobile Cylinder Div. Standard Build Series Catalog HY18-0014/US Rev C WARNING - USER RESPONSIBILITY FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE
CLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
DRILLING EQUIPMENT BRIEF INTRODUCTION
BRIEF INTRODUCTION Centrum Petroleum Machinery Limited Company (CPMC) has been proudly supplying Drilling Equipment to the oilfield since 2007. Through our Domestic and International distribution network
Class 300, Welding Neck, Slip-On and Threaded B16.47, Ser. A. ASME B16.5 Flanges
Class 300,, Slip-On and Threaded B16.47, Ser. A ASME B16.5 Flanges Weld, Slip-On, Socket Weld, Threaded, Lap Joint, Blind. 1/2" - 24" Class 150, 300, 400, 600, 900, 1500 and 2500 NOTE: Reducing flanges
CLOSED COUPLED CENTRIFUGAL PUMPS
SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM
SUNNDA CORPORATION. Pressure Control Equipment. Boost Your Bottom Line! Sunnda Corporation
SUNNDA CORPORATION Boost Your Bottom Line! Pressure Control Equipment Sunnda Corporation 4543 Brittmoore Road, Houston, TX 77041 USA Phone: +1-713-849-5678 Fax: +1-713-849-5687 E-mail: sales@sunnda.com
Model 393B31. Seismic, high sensitivity, ceramic flexural ICP accel., 10 V/g, 0.1 to 200 Hz, Installation and Operating Manual
Model 393B31 Seismic, high sensitivity, ceramic flexural ICP accel., 10 V/g, 0.1 to 200 Hz, Installation and Operating Manual For assistance with the operation of this product, contact PCB Piezotronics,
OPERATION & SERVICE MANUAL
OPERATION & SERVICE MANUAL Model: 07-3000-1921 Defueler 06/2007 Rev. 07 Tronair, Inc. Phone: (419) 866-6301 800-426-6301 1 Air Cargo Pkwy East Web: www.tronair.com Swanton, OH 43558 Email: sales@tronair.com
15 Frame Plunger Pump
15 Frame Plunger Pump 316 Stainless Steel Model 1951 Patented Design specifically for Liquid Carbon Dioxide FEATURES Superior Design Triplex Plunger design gives smoother flow. Plunger seals are lubricated
Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
P843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P843NSATS For Models: NL843N2, NL843NW2, and NL843NW3 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its
Mail to: P.O. Box 1177 Humble, TX Ship to: 1811 Humble Place Drive Humble, TX Phone: Fax:
Mail to: P.O. Box 77 Humble, TX 7737-77 Ship to: 8 Humble Place Drive Humble, TX 77338 Phone: 28-58-200 Fax: 28-58-20 E-mail: sales@cam-tech.com Website: www.cam-tech.com 7/9/6 7K-0032 Cam-Tech Products
Technical Service Parts Breakdown
Parts Breakdown Group: 4000 J10 6 Diode Notes: Form: SP1013 Refer to SP1013 -DWG for major component drawing. Date: December 1, 2009 Refer to TSB-30 for hardware kit breakdown for File: Alternator Parts
CONTROL CHOKE SINCE1958. Unique. Precise. Quality. Reliable.
SINCE95 RB SERIES CONTROL CHOKE Unique. Precise. Quality. Reliable. RB SERIES CONTROL VALVES FEATURES Benefits The RB Series Control Valve features several unique design characteristics that minimize wear
Fast, Effective Blowout Protection
Dual or Single Ram Hydraulic BOPs Fast, Effective Blowout Protection MODEL DRH - DUAL RAM HYDRAULIC BOP Guide Rib Pipe Centering Guide Ram Rubber Pipe Ram Block Door Cylinder Locking Shaft Lip-Type Piston
DIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F
Plunger Pumps XMA 1750 RPM E VERSION 1 1/8 WITH NEMA 182-184 FLANGE FEATURING MANIFOLD: High strength forged brass for long term use. DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid
WE WROTE THE BOOK ON MUD PUMPS.
WE WROTE THE BOOK ON MUD PUMPS. AMC is a full service distributor of Weatherford Mud Pumps along with Weatherford s new Ellis Williams mud pump line. We can offer either of these pumps under our distributorship
MA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
PARTS MANUAL KP-3300PT PISTON TYPE PUMP
PARTS MANUAL KP-3300PT PISTON TYPE PUMP INEX - Parts Page rawing page 4 - Fluid End etails & KP-245-250 Piston etail page 5 - KP-245-275R & KP-245-300 Piston etail page 6 - KP-190/160-A Water/Oil Manifold
PARTS MANUAL P For Models: NL773LW4 and NL773LW4E.
PARTS MANUAL P773-4 For Models: NL773LW4 and NL773LW4E www.northern-lights.com CALIFORNIA Proposition 65 Warning: Breathing Diesel engine exhaust and some of its constituents are known to the State of
Jeep Wrangler Heavy Duty Drag Link Installation Instructions
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF SYNERGY MFG. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE WRITTEN PERMISSION OF SYNERGY MFG IS PROHIBITED. Revisions Rev. Description
WP Petroleum (Shanghai) Ltd. Drilling Rig Equipment & Components
WP Petroleum (Shanghai) Ltd. Drilling Rig Equipment & Components Drilling Rig Equipment & Components Mud Pump and Spare Parts Travelling Blocks Hooks Block Hook Units Swivels Rotary Tables WP Petroleum
GH-BETTIS OPERATING & MAINTENANCE INSTRUCTIONS DISASSEMBLY & ASSEMBLY FOR THE T80X-M4-S DOUBLE ACTING SERIES HYDRAULIC ACTUATORS
GH-BETTIS OPERATING & MAINTENANCE INSTRUCTIONS DISASSEMBLY & ASSEMBLY FOR THE T80X-M4-S DOUBLE ACTING SERIES HYDRAULIC ACTUATORS -S INDICATES CYLINDERS ARE IN TANDEM PART NUMBER: 100121 REVISION "A" ECN
Instructions, Parts and Maintenance Manual AIR WINCH MODEL K6UL K6UL35WF TRANSOCEAN OFFSHORE P.O. GLOBE RAM Job# RS8839 S/N???????
Instructions, Parts and Maintenance Manual AIR WINCH MODEL K6UL K6UL35WF TRANSOCEAN OFFSHORE P.O. GLOBE-0000380836 RAM Job# RS8839 S/N??????? Warning! Review WINCH OPERATING PRACTICES Prior to use. Always
2030G BAR SERIES
GENERATION 2 BASKET RAKE MODEL 2030G2-7-1 7-BAR SERIES Serial #147000-147999 PARTS MANUAL April 2014 GENERATION 2 PARTS MANUAL DESCRIPTION PAGE TABLE OF CONTENTS 1 MAINFRAME ASSEMBLY 2-3 EXTENSION ARM
711 URAI Roots. Quick Specs. Also Available in: Part Number
711 URAI Part Number 65121020 Detachable steel mounting feet Rigid one piece cast iron casing Connections in standard pipe sizes Straight, precision machined two lobe impellers Splash oil lubricated gears
Chemical Injection Pump
TEXSTEAM MX3 SERIES Chemical Injection Pump TEXSTEAM INC. Chemical Injection Pump Product Features Up to 62 gallons (235 liters) per day Lightweight Discharge pressures to 10,000 PSI (690 bars) Adjustable
WKM Model MB DynaCentric High Performance Butterfly Valve
Document Number: TC003001-10 Revision: Rev 1 WKM Model MB DynaCentric High Performance Butterfly Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS... 3 CATALOG NUMBER
DEMCO Resilient-Seated Butterfly Valve
Document Number: TC003001-01 Revision: Rev 2 DEMCO Resilient-Seated Butterfly Valve Installation, Operation, and Maintenance Manual TABLE OF CONTENTS BILL OF MATERIALS... 3 SCOPE... 5 NAMEPLATE INFORMATION...