SOUTHWEST OILFIELD PRODUCTS, INC.
|
|
|
- Mervin Barrie Harmon
- 5 years ago
- Views:
Transcription
1 SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8412A FLUID END FOR IDECO T-800 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼ 6 ½ 6 ¾ 7 T MUD PUMP PERFORMANCE CHART MAX-P.S.I G.P.R R.P.M NOTE: I.H.P.= INPUT HORSE POWER S.P.M.= STROKE PER MINUTE P.S.I.= POUNDS PER SQUARE INCH G.P.R.= GALLONS PER REVOLUTION *MAX P.S.I. CALCULATIONS DO NOT EXCEED MAXIMUM FLUID END PRESSURE RATINGS BASED ON 100% VOLUMETRIC EFFICIENCY AND 90% MECHANICAL EFFICIENCY
2
3 FLUID END TYPE MODEL OF PUMP SIZE OF PUMP SOUTHWEST 5000 PSI IDECO T X 10 ITEM NO. PART NO. DESCRIPTION QTY. REQ D 8412A FLUID END ASSEMBLY: (CONSISTS OF ITEMS: 3,4, 17,18,19,20,21,22,23,24,25,26,27,28,29,32,33,34,35) YXX LINER (REFER TO GUIDE TO ORDERING CHART FOR TYPE (Y) AND FOR SIZE (XX) 3 2 AJO512 LINER SEAL WEARPLATE 3 3A WEARPLATE SOCKET HEAD CAP SCREW WEARPLATE AND MODULE SEAL 6 5 XX-BYY PISTON REFER TO GUIDE TO ORDERING CHART FOR SIZE (XX) AND FOR TYPE (YY) 3 5A 2932 PISTON BUSHING (FROM 1-5/8 TO 1-1/2 STRAIGHT BORE) PISTON SEAL PISTON ROD (WITH ELASTIC STOP NUT) 3 8 API-4ESN PISTON ROD NUT PISTON ROD CONNECTING STUD SUB ROD (CLAMP TYPE) CW ROD CLAMP (WITH WATER JACKET)(CONSIST OF 11A, 11B, 11C) 3 11A 1200H30 HOSE (1/2 X 30 WITH 1/2 MALE X 3/8 MALE CONNECTIONS) 3 11B PIPE (3/8 X 14 GALVANIZED AND THREADED ON ONE END) 3 11C BOLT (5/8 X 6-1/2 GRADE 8 BOLT WITH LOCK NUT AND WASHER) G12 PONY ROD 3 13 SEE PAGE VALVE 6 14 SEE PAGE VALVE INSERT 6 15 SEE PAGE VALVE SPRING 6 16 SEE PAGE SEAT 6 SWTM1700 HYDRAULIC SEAT PULLER KIT COMPLETE (REFER TO TOOLS SECTION OF CATALOG FOR DETAILS.) A SOUTHWEST HP QUICK-CHANGE VALVE COVER ASSEMBLY: (CONSIST OF ITEMS NO ) THREADED FLANGE SCREW GLAND A PLUG (COMPLETE WITH VALVE GUIDE; SCREWS; AND BUSHING) 6 20 P129 HP VALVE COVER PLUG SEAL (ALSO AVAILABLE IN URETHANE PART# P129U) R VALVE GUIDE (complete with bushing #4700I) I VALVE GUIDE BUSHING (ALSO AVAILABLE IN URETHANE PART# 4700IU) VALVE GUIDE SCREW VALVE COVER STUD (WITH SW PART# HHN /4-7 HEAVY HEX NUT) 72
4 FLUID END TYPE MODEL OF PUMP SIZE OF PUMP SOUTHWEST 5000 PSI IDECO T X 10 ITEM NO. PART NO. DESCRIPTION QTY. REQ D POWER END AND LINER RETAINER STUD (WITH SW PART# HHN /4-8 HEAVY HEX HUT) LINER RETAINER FLANGE LINER RETAINER NUT SUCTION MODULE STUD (WITH SW PART# HHN /2 8 HEAVY HEX NUT) SUCTION MANIFOLD CAP SCREW (WITH LOCK WASHER SUCTION MANIFOLD (FRONT OR SIDE INLET) SUCTION MANIFOLD SEAL S SUCTION MODULE (STUDDED ONLY) D DISCHARGE MODULE (STUDDED ONLY) DOWEL PIN DISCHARGE MANIFOLD DISCHARGE MANIFOLD SEAL DISCHARGE MANIFOLD STUD (WITH SW PART# HHN /4 8 HEAVY HEX NUT) PONY ROD SEAL BAFFLE **POLYURETHANE SEALS AVAILABLE**
5 SOUTHWEST 5000 PSI IDECO T-800 GUIDE TO ORDERING PISTONS LINERS LINER SEALS SIZE FAIL-SAFE DUAL-DURO BLACK CAT BULL DOG GRAYLOY ZIRCONIA RUBBER URETHANE 4" 76BFS 76BDD 76BBC 76BDB 6312G ZIR06 AJO512 AJO512U 4 1/4" 77BFS 77BDD 77BBC 77BDB 6312G07 AJO512 AJO512U 4 1/2" 78BFS 78BDD 78BBC 78BDB 6312G ZIR08 AJO512 AJO512U 4 3/4" 79BFS 79BDD 79BBC 79BDB 6312G09 AJO512 AJO512U 5" 81BFS 81BDD 81BBC 81BDB 6312G1 6312ZIR1 AJO512 AJO512U 5 1/4" 82BFS 82BDD 82BBC 82BDB 6312G2 AJO512 AJO512U 5 1/2" 83BFS 83BDD 83BBC 83BDB 6312G3 6312ZIR3 AJO512 AJO512U 5 3/4" 84BFS 84BDD 84BBC 84BDB 6312G4 AJO512 AJO512U 6" 85BFS 85BDD 85BBC 85BDB 6312G5 6312ZIR5 AJO512 AJO512U 6 1/4" 86BFS 86BDD 86BBC 86BDB 6312G6 AJO512 AJO512U 6 1/2" 87BFS 87BDD 87BBC 87BDB 6312G7 6312ZIR7 AJO512 AJO512U 6 3/4" 88BFS 88BDD 88BBC 88BDB 6312G8 AJO512 AJO512U 7" 89BFS 89BDD 89BBC 89BDB 6312G9 6312ZIR9 AJO512 AJO512U 7 1/4" 91BFS 91BDD 91BBC 91BDB N/A AJO512 AJO512U * CENTER GUIDED VALVES AND SEATS NOTE: DUAL-DURO AND GRAYLOY ARE REGISTERED TRADEMARKS OF SOUTHWEST OILFIELD PRODUCTS. Pg. 5
6 TYPE SOUTHWEST (Full Open) FULL OPEN-ROUGHNECK (W/Bonded Valve Insert) FULL OPEN-ROUGHNECK (High Temp Bonded Insert) FULL OPEN-ROUGHNECK (w/replaceable Urethane Insert) 3 WEB DOUBLE ANGLE O-RING 3 WEB (High Temp) 3 WEB STANDARD PLATE 4 WEB 4 WEB (High Temp) VALVES & SEATS (IDECO T-800) VALVE INSERT SPRING STAINLESS SPRING SEAT PULLER HEAD PULLER HEAD STYLE 773-1B N/A SW L N/A SWTM3750 SPLIT JAW SWND-6V2 N/A SW N/A SWND-6S6 SWND-6PH PANCAKE SWTM27SXN SPLIT JAW SWND-6V2HC N/A SW N/A SWND-6S6 SWND-6PH PANCAKE SWTM27SXN SPLIT JAW SWND-6V1 SWND-6I SW N/A SWND-6S6 SWND-6PH PANCAKE SWTM27SXN SPLIT JAW SWR SWR SWR SWR SWR SWTM3-6 SWR SWR SWR SWR SWR SWTM3-6 3 J HOOK SWR SWR SWR SWR SWR SWTM3-6 SWU5B-EH SWUDD-6AB SW N/A SW6ADD-B6 SWTM4-6 SWU5B-EHHT SWUDD-6ABHT SW N/A SW6ADD-B6 SWTM4-6 4 J HOOK PANCAKE SPLIT JAW 3 J HOOK 4 J HOOK
7 TORQUE SPECIFICATIONS FOR SOUTHWEST 8412A FLUID END ASSEMBLY IDECO T P.S.I. TORQUE TYPE (EXPRESSED IN FOOT-POUNDS) PART NUMBER DESCRIPTION COPPERCOTE MOLY GREASE DRY (NOT RECOMMENDED) API-4 ESN PISTON NUT BOLT 150 MAXIMUM VALVE COVER STUD POWER END & LINER RETAINER STUD SUCTION MODULE STUD SUCTION MANIFOLD CAP SCREW DISCHARGE MANIFOLD STUD NO MORE FORCE THAN ONE MAN ON 3' WRENCH/CHEATER COMBINATION
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR WEATHERFORD MP-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8429-A FLUID END FOR BREWSTER B-1600-T / B-1300-T MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8477-25A FLUID END FOR GARDNER DENVER PZ-11/PZ-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR OILWELL HD-1700-PT/HD-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8429-7A FLUID END FOR BREWSTER B-1100-T / B-1000-T MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE MODEL I.H.P. S.P.M. LENGTH 4
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8422A FLUID END FOR EMSCO F-1000 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5 ¼ 5 ½ 5 ¾ 6 6
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8487A FLUID END FOR OILWELL A-1100-PT / A-850-PT PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 ½ 5 5
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8482-25A FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8407-7A FLUID END FOR IDECO T-1600 / T-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8432-A FLUID END FOR EWECO E-2200 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 5 5 ½ 6 6 ½ 7 7 ½ 8 8 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8482-A FLUID END FOR NATIONAL 14-P-220 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8488-1A FLUID END FOR OILWELL A-1700-PT/A-1400-PT MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8476-25A FLUID END FOR NATIONAL 12-P-160 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8490-25ALEW FLUID END FOR LEWCO WH-2214 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 5 5 ½ 6 6 ½ 7 7 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8477A FLUID END FOR GARDNER DENVER PZ-11/PZ-10 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST 8404A FLUID END FOR BOMCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE 8475-5 FLUID END FOR GARDNER DENVER PZ-8 PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5 ¼ 5 ½
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE FLUID END FOR BOMCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST OEM STYLE 8475-5 FLUID END FOR GARDNER DENVER PZ-9 (PZJ) PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH 4 4 1/2 5 5
SOUTHWEST OILFIELD PRODUCTS, INC. SOUTHWEST FLUID END A FOR WIRTH TPK-1600, 7500 P.S.I. MUD PUMP EXPENDABLE PARTS LIST
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDABLE PARTS LIST SOUTHWEST FLUID END 8446-25A FOR WIRTH TPK-1600, 7500 P.S.I. MUD PERFORMANCE CHART LINER SIZE IN INCHES PUMP MAX MAX STROKE MODEL I.H.P.
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIELD PRODUCTS, INC. MUD PUMP EXPENDALE PARTS LIST OEM STYLE FLUID END FOR EMSCO F-1600 / F-1300 MUD PUMP PERFORMANCE CHART PUMP MAX MAX STROKE LINER SIZE IN INCHES MODEL I.H.P. S.P.M. LENGTH
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 80-5 FLUI EN FOR OMO F-600 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¾ 5 5 ½ 6 6 ¼ 6 ½ 6 ¾ 7 7 ¼ 7 ½ F-600 600
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8476-25LEW FLUI EN FOR LEWO W-1712 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 ½ 5 5 ½ 6 6 ½ 7 W-1712 1700 120 MU
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8476-25 FLUI EN FOR NTIONL 12-P-160 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 ½ 4 ¾ 5 5 ¼
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST OEM STYLE 8475-5 FLUI EN FOR GRNER ENVER PZ-8 PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH 4 4 /2 5 5 ¼ 5 ½ 5 ¾ 6 6 ¼ 6 ½ 6 ¾
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST OL STYLE 876- FLUI EN FOR NTIONL -P-60 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ 5 5 ¼ 5
TABLE OF CONTENTS DESCRIPTION PAGE
TABLE OF CONTENTS DESCRIPTION PAGE BLOCK-HOOK COMBO...2 ROTARY SWIVEL...3 ROTARY TABLE...4 MKP STYLE SSW-40...5 MKF SERIES TRIPLEX MUD PUMPS... 6-8 MKP-165...9 MKP-275 TRIPLEX MUD PUMP...10 MKP-550 TRIPLEX
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST SOUTHWEST 8 FLUI EN FOR GRNER ENVER PZ-/PZ-0 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¼ ½ ¾ 6 6 ¼
PARTS BOOK TRIPLEX MUD PUMP WS-1300T
PARTS BOOK TRIPLEX MUD PUMP WS-1300T White Star Pump Co. 22718 Commercial Lane, Tomball, Texas 77375 2010 For parts and service contact White Star sales office 22718 Commercial Lane, Tomball, Texas 77375
SOUTHWEST OILFIELD PRODUCTS, INC.
SOUTHWEST OILFIEL PROUTS, IN. MU PUMP EXPENLE PRTS LIST OEM STYLE FLUI EN FOR GRNER ENVER PZ-/PZ-0 MU PUMP PERFORMNE HRT PUMP MX MX STROKE LINER SIZE IN INHES MOEL I.H.P. S.P.M. LENGTH ½ ¼ ½ ¾ 6 6 ¼ 6
B/M No. B H00925 M /8-10T 3" B H00920 M /8-10T 2-1/2" Part Number. Item. No. 800B
Threaded Case (NPT), Packing Construction Page 80. Supersedes 03/0/ 87 8 B/M Mtg. Bracket Spline Ext. B00 4 H0095 M0454-3/8-0T 3" B5999 5 H0090 M07-3/8-0T -/" 7 Kit available for this model, P/N B778 for
S60 PARTS LIST AND DRAWINGS
PARTS MANUAL S60 PARTS LIST AND DRAWINGS Item Part Description Qty. 1 S60-001 Main Body 1 2 S60-002C Chuck Housing 1 3 S60-003C Main Valve Complete 1 3A S60-003 Valve Housing (Bare) 1 3B S60-019 Valve
Auto Air Valve Parts List
Auto Air Valve Parts List 1 Cap 1 2 O Ring 1 3 Cover 1 4 Lock Nut 5/16 UNF 1 5 Flat Washer 8mm 2 6 Flat Washer 2 7 Diaphragm 1 8 Guide bush 1 9 O Ring 1 10 O Ring 1 11 Shaft 1 12 Flat Washer 1 13 Seat
Fast, Effective Blowout Protection
Dual or Single Ram Hydraulic BOPs Fast, Effective Blowout Protection MODEL DRH - DUAL RAM HYDRAULIC BOP Guide Rib Pipe Centering Guide Ram Rubber Pipe Ram Block Door Cylinder Locking Shaft Lip-Type Piston
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-500PT PISTON TYPE PUMP INDEX - Parts Page Drawing page - Fluid End Detail page - Piston Assembly, Liner & Pony Rod Detail page - Water Manifold Assembly Detail page 5 - Oil Manifold Assembly
SUNNDA CORPORATION. Go Above & Beyond
SUNNDA CORPORATION Go Above & Beyond Sunnda Corporation Headquartered in the energy capital of the world - Houston, Texas, Sunnda Corporation designs, manufactures, and markets an extensive line of oil
Features: Applications: Irrigation. Commercial. Construction. Municipal. Mining
Frame Mount 7.5" BOOK: FMT-015 DATE: Mar. 1, 2012 Features: Volute: Ductile iron for heavy-duty service. Back pullout design. Can be rotated for ease of installation. Impeller: Enclosed design for high
RETSCO, Ltd. Shear Relief Valve Catalog. When Quality Counts, Count on RETSCO, Ltd. Check out our website:
RETSCO, Ltd. When Quality Counts, Count on RETSCO, Ltd Shear Relief Valve Catalog 3" 2" Check out our website: www.retscoinc.com Quick Reference for Top Level Assembly Part Number ASSEMBLY PART NUMBER
SERVICE MANUAL. PVR15-Manifold Series Pump. J Design Series INSTALLATION. Ordering Code PVR15 - _ RM - _ - - J
SERVICE MANUAL PVR15-Manifold Series Pump Installation, Startup, Operating Instructions, Parts Pages, Repair Procedures J Design Series This service manual applies to products with Ordering Codes like
TL BOP. TL Custom Features:
TL BOP The Cameron TL BOP product line is the result of an evolution of Cameron s successful U, UII and T BOPs combined with custom features based on each customer s specific requirements. All TL BOPs
XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XTV 3400 RPM N VERSION 24MM SOLID SHAFT DIMENSIONS BOLTS: Six 6mm grade 12.9. PLUNGERS: A special thick solid ceramic for
MA-40M(L)(H) TRIPLEX PLUNGER PUMP
MA-40M(L)(H) TRIPLEX PLUNGER No. of Plungers...3 Maximum Rated Speed...550 rpm Stroke Length...2.5 in. 63.5 mm Maximum Rated Power...40.0 hp 29.8 kw Maximum Rod Load...3456 lbs. 15.3 kn Weight MA-40M...750
MA-155M(L)(H) TRIPLEX PLUNGER PUMP...
MA-155M(L)(H) TRIPLEX PLUNGER PUMP... No. of plungers... 3 Maximum rated speed... 450 rpm Stroke length... 4.50 in. 4.3 mm Maximum rated power... 155.0 hp 5.5 kw Maximum rod load... 9087 lbs. 40.3 kn Weight
F-800 and F-1000 MUD PUMP Specification and Performance
This product conform to API Spec 7K, F-800 and F-1000 MUD PUMP Specification and Performance Distributed by 1. Technical Specification and performance Parameter 1.1 F-800 and F-1000 Mud Pumps Specification
Mud Pump Condition Monitoring and Pulsation Control Equipment Technology. IADC Maintenance Committee Meeting
Mud Pump Condition Monitoring and Pulsation Control Equipment Technology IADC Maintenance Committee Meeting 2008-10-08 IADC Presentation Optimization of the mud pump system performance through pump condition
CENTRIFUGAL PUMPS 7.5" FRAME MOUNT SERIES FEATURES
FEATURES Volute: Ductile iron volute for heavy-duty service; back pullout design; can be rotated for ease of installation Impeller: Enclosed design for high efficiency; configured for superior NPSH characteristics;
15 Frame Plunger Pump
15 Frame Plunger Pump 316 Stainless Steel Model 1951 Patented Design specifically for Liquid Carbon Dioxide FEATURES Superior Design Triplex Plunger design gives smoother flow. Plunger seals are lubricated
COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 6 SPECIFICATIONS BROCHURE
COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 6 SPECIFICATIONS BROCHURE HIGHLIGHTS Name: Discovery 6 Brand Loadcraft Power: 550 HP Year: 2013 Double Drum: Drawworks and Sandline Drums : Self-propelled Land
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INDEX
PARTS MANUAL KA-3500PT PISTON TYPE PUMP INEX - Parts Page rawing page 2 - Fluid End etail page 3 - Piston & Liner etail page 4 - Parts List page 5-10 upagro B.V. 1/10 KA-126FE KA-34 KA-38 KT-34 KA-35 upagro
QUICK SELECTION GUIDE
SELECTION GUIDE SAE HYDRAULIC 4-BOLT AND SPLIT FLANGED FITTINGS IN CARBON STEEL AND STAINLESS STEEL ISO 14001 Registered Environmental Management ISO 9001 Registered Quality Management OHSAS 18001 Registered
Service Manual for Hydraulic Vane Pumps Flange Mounted
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Service Manual for Hydraulic Vane Pumps Flange Mounted SM PSCF/07.03
Bulletin C Dean Pump Division. Heavy Duty, High Temperature Process Pumps. R4140 Telescoping Guard. R4140 C-Face Motor Support
Bulletin C 1.4.43 Dean Pump Division Heavy Duty, High Temperature Process Pumps R4140 Telescoping Guard R4140 C-Face Motor Support Dean Pump Series R Centrifugal Process Pumps Capacities to 5000 GPM (1135
XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS
Plunger Pumps FEATURING MANIFOLD: High strength forged brass for long term use. XMV 3400 RPM D VERSION 1 WITH GAS ENGINE FLANGE DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid ceramic
REPAIR PARTS ROBJETSU. Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT
REPAIR PARTS ROBJETSU Jets and Submersibles REPAIR PARTS FOR OBSOLETE PRODUCT Index JETS J03, J05, J03N, J05N...3 JS...4 JL07N, JL0N...5 GH...6 Primeflow...7 XSH...8 VA...9 SUBMERSIBLES E... 0 4" High
WE WROTE THE BOOK ON MUD PUMPS.
WE WROTE THE BOOK ON MUD PUMPS. AMC is a full service distributor of Weatherford Mud Pumps along with Weatherford s new Ellis Williams mud pump line. We can offer either of these pumps under our distributorship
MODEL 5540 CONTENTS. Installation, Operation and Maintenance Instructions 1.0 GENERAL
Installation, Operation and Maintenance Instructions MODEL 5540 Sep 20 CONTENTS.0 GENERAL. Model Number---------------------------------------------------------------------------------------------------------------
GROUP 11 HYD. PUMPS & VALVES
GROUP 11 HYD. PUMPS & VALVES T944 EXTENDO PUMP INSTALLATION, FL-14490... 11-2 PUMP ASSEMBLY, LL-7500-11... 11-4 PUMP ASSEMBLY, LL-7500-11, (PUMP SECTION, LL-7501-15)... 11-6 PUMP ASSEMBLY, LL-7500-11,
COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 2 SPECIFICATIONS BROCHURE
COMPLETIONS AND WORKOVER RIG RIG DISCOVERY 2 SPECIFICATIONS BROCHURE HIGHLIGHTS Name: Discovery 2 Brand Wilson Power: 550 HP Year: 1982 (Repotenciado en el 2009) Double Drum: Drawworks and Sandline Drums
PARTS BOOK CATALOG IMPLEMENT ASSEMBLIES STANDARD BOOM 3PT HITCH MOUNT
PARTS BOOK CATALOG IMPLEMENT ASSEMBLIES STANDARD BOOM 3PT HITCH MOUNT DIAMOND MOWERS, Inc. 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS
P773-2 For Model: M773LW2 PARTS MANUAL. Marine Generators Marine Diesel Engines Land-Based Generators
P773-2 For Model: M773LW2 PARTS MANUAL Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the
COVER PLATES & ROLLERS
COVER PLATES & ROLLERS 9035-10 Revised 8/95 FOR MODELS - ALL 3/98 Item Part Number Part Description Qty. 1 9035--1--10 Top Cover Plate 1 2 62--425 3/8NC x 3/4 Hex Washer Thread Cutting Screw 8 3 62--544
WP Petroleum (Shanghai) Ltd. Drilling Rig Equipment & Components
WP Petroleum (Shanghai) Ltd. Drilling Rig Equipment & Components Drilling Rig Equipment & Components Mud Pump and Spare Parts Travelling Blocks Hooks Block Hook Units Swivels Rotary Tables WP Petroleum
P R O D U C T S. Jinan Tianwei Innovation Oilfield Equipment Enterprise
I P R O D U C T S Mud pump parts & Fluid end expendables Pistons Valves & Seats Liners Piston rods & Pony rods Fluid end parts Modules Drilling Tools Rotary slips Drilling collar slips Safety clamps Casing
HWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
GLOBAL DRILLING SOLUTIONS, INC STOCK LIST
GLOBAL DRILLING SOLUTIONS, INC STOCK LIST Item Description Qty in Stock Lighting Equipment LED Flood Light. IECEX Certificed. Explosion proof / Zone & ; Ex d IIB T Gb; IP. / Rated voltage: 00 00VAC, 0/0Hz.
SERVICE INSTRUCTIONS. Material Pump
TM TM SERVICE INSTRUCTIONS Material Pump 9618 DESCRIPTION Model 9618 is designed for pumping petroleum products from the original container to a desired location. Due to its non-corrosive (aluminum and
REPAIR INSTRUCTION - MP4120-SWS/MP4124-SWS
Disassembly sequence REPAIR INSTRUCTION - MP4120-SWS/MP4124-SWS 1. With a 27mm wrench, remove the three discharge plugs (#48) and three inlet plugs (#42A) from the manifold (#43). 2. Inspect the plug o-rings
WORKFORCE MUD PUMP WORKFORCE PUMP. WORKFORCE TM WWS500 Pump WORKFORCE PUMP
PUMP TM Pump MUD PUMP PUMP GLOBAL SOLUTIONS DESIGNING, MANUFACTURING AND PACKAGING FOR THE OFFSHORE INDUSTRY TM Reinforced, 36 Kip high strength, stress relieved, alloy-steel Pump Frame provides rigidity
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500. Split Coupled Vertical In-Line Pumps BVL
Discharge diameters 1.5", 2", 3", 4", 5", 6", 8", 10", 12" & 14" HP 1 to 500 Split Coupled Vertical In-Line Pumps BVL Split Coupled Vertical In-Line Pumps Capacities up to 12,000 GPM Heads up to 560 ft
DIMENSIONS. Oil Capacity = 14.6 oz Maximum Fluid Temperature = 140 F Inlet Thread = 1/2 F Discharge Thread = 3/8 F
Plunger Pumps XMA 1750 RPM E VERSION 1 1/8 WITH NEMA 182-184 FLANGE FEATURING MANIFOLD: High strength forged brass for long term use. DIMENSIONS BOLTS: Eight 6mm grade 12.9. PLUNGERS: A special thick solid
PWD. PWD API 610 BB1 Single Stage Pump
PWD PWD API 610 BB1 Single Stage Pump HYDRAULIC PERFORMANCE COVERAGE FLOW (m 3 /h) 50 Hz Performance Coverage Visit our web site at www.pumpworks610.com and specify flow and performance needs and obtain
T BOP. prep. TC Cooper Cameron, Cameron Division
T BOP The Cameron T blowout preventer offers a unique combination of benefits including safety, economy, reliability, extended service life, reduced height and fast and easy service. Side ram removal on
CENTRIFUGAL PUMPS CLOSE-COUPLED 9" FEATURES SPECIFICATIONS APPLICATIONS
FEATURES Volute: Heavy-duty cast iron construction; back pullout design; can be rotated for ease of installation Impeller: Enclosed, cast iron design for high efficiency; hydraulically balanced for reduced
Appendix D Outline Dimensions
Appendix D Outline Dimensions Model D81 Bare with Flywheel Suction valve unloaders (optional) 5-1/2" (13.) 5-1/2" (13.) 1/4" NPT drain Inlet 2" Weld flange Inlet pressure guage Outlet pressure gauge Outlet
PARTS MANUAL KP-3300PT PISTON TYPE PUMP
PARTS MANUAL KP-3300PT PISTON TYPE PUMP INEX - Parts Page rawing page 4 - Fluid End etails & KP-245-250 Piston etail page 5 - KP-245-275R & KP-245-300 Piston etail page 6 - KP-190/160-A Water/Oil Manifold
Schede tecniche Corsair 300 PDB
Progetto per la realizzazione di un impianto geotermico pilota nell area del Permesso di Ricerca Scarfoglio PROGETTO DEFINITIVO Documento SCA-001-PD-00-A01 Schede tecniche Corsair 300 PDB gennaio 2015
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 060-064 - 130-134 - 133-U1 PUMP PARTS PRICE LIST DESCRIPTION QTY. PER PUMP 060-U1 Pump Body 1 See Note 1 1 060-U1 Pump Body with Flush 1 See Note 1 1 064-U1 Rectangular Flange Inlet Body 1
AXG (FG-AXG) 5 x 6. Duplex Power Pump. Where hard work is still treasured and quality is a matter of pride. 7k-0266
AXG (FG-AXG) x Duplex Power Pump Where hard work is still treasured and quality is a matter of pride. k-0 American Mfg Company is ISO 900:00 Certified. k-0 Perry Johnson Registrars, Inc., has assessed
Tie-rod Cylinders, ISO 6431, ISO compliant Series 60
Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552
Service Manual for Hydraulic Vane Pumps Subplate Mounted
Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics Service Manual for Hydraulic Vane Pumps Subplate Mounted SM PSSF/07.03
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 030-U1 Pump Body 1 See Note 1 1 030-U1 Pump Body with Flush 1 See Note 1 1 034-U1 Rectangular Flange Inlet Body 1 See Note 1 1 034-U1 Rect. Flange Inlet Body with Flush 1 See Note 1 1
VDD 400 Offshore Super Single - Automated Pipehandling System
Chapter 1 - General General Rack and Pinion Max. Hoisting Capacity 400 short tons (363 metric tonnes) Max. Pushing Capacity 100 short tons (91 metric tonnes) Max. Drilling Depth 16,500 ft (5,000 m) Operating
PARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
Material Specifications
5.2012.12.b 6200 Series Specifications The Flomore 6200 Series Pump line consists of a series of basic pump options all developed from a modular power unit. All units are pneumatically driven positive
High Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA296 RA3146 RA3186 RA296 The smaller, foot mounted economy version of the air-cooled RA series
Parts Book. 5 X 7 ESV LUB Package ESN Model / Configuration. Compressor Serial Number(s) List Number
Parts Book Model / Configuration 5 X 7 ESV LUB Package Compressor Serial Number(s) ESN 2313 List Number 17311317 This parts book is for use with Ingersoll Rand equipment of the type listed above only.
Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS
SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the
EXPLODED VIEW & PARTS LIST
SECTION 8 EXPLODED VIEW & PARTS LIST ALUMINUM, A300-*AA-****-*** 10 20 30 352 40 322 40 OPTIONAL 311 342 360 323 381 312 321 61 62 70 385 341 383 80 90 100 110 120 130 140 150 160 353 170 355 372 384 330
2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
1 1/4 NPT FILTER 2 NPT FILTER REPLACEMENT SCREENS FOR 1 1/4 & 2 FILTERS 1 1/4 SCREENS 2 SCREENS. Hole Size Designation 150 Mesh 1M150
ALUMINUM Y FILTERS 50 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure. 80 GPM Rating is with the lowest flow screen with no head loss. 200 PSI Max Working pressure.
PARTS BOOK CATALOG IMPLEMENT ASSEMBLIES STANDARD BOOM 3PT HITCH MOUNT
PARTS BOOK CATALOG IMPLEMENT ASSEMBLIES STANDARD BOOM 3PT HITCH MOUNT DIAMOND MOWERS, Inc. 350 E 60 th St. North Sioux Falls, SD 57104 FOR WARRANTY CALL DIAMOND MOWERS DIRECT: 888-960-0364 OUR TECHNICIANS
CENTRIFUGAL PUMPS 13" CLOSE-COUPLED FEATURES
FEATURES Volute: Cast iron for heavy-duty service; back pull-out design; can be rotated for ease of installation; split volutes for reduction in radial bearing load (6 x 8-13 and 8 x 10-13) Impeller: Enclosed
3/4" BRASS AGRICULTURAL SPRINKLERS WR-33 WR-32 WR-35
3/4" BRASS AGRICULTURAL SPRINKLERS WR-33 WR-32 WR-35 NOTE: All sprinklers are double nozzle, but are shipped with the removable spreader nozzle plug installed and no range nozzle. All nozzles are ordered
High Temperature Air-Cooled Hot Oil Pumps
Bulletin C 1.4.42 Dean Pump Division High Temperature Air-Cooled Hot Oil Pumps No Water Cooling Required RA3 RA2 DEAN PUMP SERIES RA FAN COOLED HIGH TEMPERATURE HOT OIL PUMPS No Liquid Cooling Required
API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG
1 API 6A Gate Valves, Chokes, Mud Valves, Check valves, Test Units, Lubricants. WELL HEAD CATALOG Sevilla No. 211 Fracc. Praderas de Elite Reynosa, Tamps Tel: (899)-263-49-82 www.marvic-int.com 2 Table
Industrial Pumping Equipment Air-Operated Diaphragm Pumps
Industrial ing Equipment -Operated Diaphragm s 85630 85628 85622 85634 ¼" - 2" -Operated s Basic Design Features Diaphragm pumps are driven by compressed air.the directional air distribution valve and
List of Parts for Screw Compressor VMY 347 H and VMY 347 M Model 1994
00.08 List of Parts for Screw Compressor VMY 347 H and VMY 347 M Model 994 Relevant drawing: 0664-700 Unless otherwise stated, all measurements are in mm.) Pos. Designation Qty per comp. H M Used w/pos.
PA 52 HY REACH. Mk2 Models. Parts Manual. Publication 490 October 2005 Part No Revision:
Publication 490 October 2005 Part No. 41570.90 Revision: 07.11.08 PA 52 HY REACH Mk2 Models Parts Manual For best performance USE ONLY McCONNEL SERVICE PARTS To be assured of the latest design improvements