Rocket High Performance Injector. Single Barb. Dual Barb. B Series Injectors. C Series Injectors. Adjustable Water Flow

Size: px
Start display at page:

Download "Rocket High Performance Injector. Single Barb. Dual Barb. B Series Injectors. C Series Injectors. Adjustable Water Flow"

Transcription

1 Rocket High Performance Injector The Rocket injector was designed to be the most versatile venture injector in the marketplace. A superior design that can handle any task you throw at it. Designed to be serviceable and designed to be injectors for a lifetime and not a season. The Rocket is the most efficient competitive injector, with the lowest pressure loss amongst competitive units, delivering more pressure for any application. It enables cleaning at greater pressure while consuming less chemicals. It s effortless to repair. With the use of a removable nozzle and metering barb, it makes maintenance and repair extremely simple, extending the life of the injector and reducing the cost of ownership. It has the greatest range of any injector on the market. It leads the industry by running the breadth of operating pressures and by covering the extreme range of dilution ratio Single Part # Repair Kit GPM Color Price IN INK GPM Red $$ IN INK GPM Orange $$ IN INK GPM Grey $$ IN INK GPM Blue $$ IN INK GPM Light Green $$ IN INK GPM Dark Green $$ Single Check Valve Repair Kit - INK21001 Dual Part # Repair Kit GPM Color Price IN INK GPM Red $$ IN INK GPM Orange $$ IN INK GPM Grey $$ IN INK GPM Blue $$ IN INK GPM Light Green $$ IN INK GPM Dark Green $$ Dual Check Valve Repair Kit - INK21002 B Series Injectors C Series Injectors Incorporates an externally adjustable, internal by-pass valve plus a chemical injection metering screw. It eliminates need of water flow nozzle bushings, extends flow range of injector and adapts easily to variations in liquid flow. Injectors have adjustable stainless steel metering screw for adjustments to chemical injection. Max Temp. 180º F. **Metering tip model also available Adjustable Water Flow Part # Pipe Size Price IN2003C 1/8 $$ IN200C 1/8 $$ IN206B Part # Pipe Size Price IN202B 3/8 $$ IN203B 3/8 $$ IN204B 1/2 $$ IN206B 3/4 $$ Metering tip model also available IN202C 1/4 $$ IN203C 3/8 $$ IN204C 1/2 $$ IN206C 3/4 $$ IN208C 1 $$ 687

2 Hydra-Flex Chem-Flex Chemical Injectors 3/8 NPT Stainless Steel Inlet and Outlet Ports. Rated to 1000 PSI and 175 F Dual material construction combines the excellent corrosion and chemical resistance of Kynar with the mechanical strength of stainless steel. Single Dual Tri PLACE YOUR ORDER ONLINE ANYTIME! LIVE CHAT Monday - Friday: 9am-5pm EST Single Flow Rate PSI Part # GPM Nozzle Size Color Price IN Red $$ IN Orange $$ IN Grey $$ IN Blue $$ IN Light Green $$ IN Dark Green $$ Dual - 60 Flow Rate PSI Part # GPM Nozzle Size Color Price IN Red $$ IN Orange $$ IN Grey $$ IN Blue $$ IN Light Green $$ IN Dark Green $$ Tri - 60 Flow Rate PSI Part # GPM Nozzle Size Color Price IN Red $$ IN Orange $$ IN Grey $$ IN Blue $$ IN Light Green $$ IN Dark Green $$ Like facebook.com/kleenritecorp Chemical Injectors Forged brass housing Viton O-Rings Stainless steel spring Stainless steel ball 3/8 Male NPT inlet 3/8 Female NPT outlet 1/4 Hose Part # Orifice Price SUT $$ SUT $$ SUT $$ 688

3 Cat Injectors Adjustable Part # GPM Orifice PU MM PU MM PU MM Stainless Steel Chemical Injector Stainless Steel Ball, Stainless Steel Nozzle EPDM Elastomers 5500 PSI 3/8 M Inlet/Outlet Max PSI /8 M x M Viton O-ring Max Temp 180º F SS Orifice CALL Part # Orifice GPM Hose Price GPP mm /4 $$ GPP mm /4 $$ GPP mm /4 $$ GPP mm /4 $$ GPP mm /4 Dual $$ Stainless Steel Chemical Injector Stainless Steel Ball, Stainless Steel Nozzle, Viton Elastomers 5500 PSI 3/8 M Inlet/Outlet CPVC Chemical Injector Teflon Ball, CPVC Nozzle, Kynar Hose 4500 PSI 1/4 Hose Viton O-Ring Part # Orifice GPM Hose Price GPP mm /4 $$ GPP mm /4 $$ GPP mm /4 $$ GPP mm /4 $$ GPP mm /4 $$ GPP mm /4 $$ Stainless Steel Chemical Injector Teflon Ball, Stainless Steel Nozzle Kynar Hose 1/4 Hose EPDM O-Ring 3/8 Intlet/Outlet Part # Orifice GPM Outlet Inlet/ Price GPP mm /8 M $$ GPP mm /8 M $$ GPP mm /2 M $$ GPP mm /2 M $$ GPP mm /2 M $$ Metering Tip Kit INDK100-15K $$ GPP mm $$ GPP mm $$ 689

4 ADJUSTABLE SIPHON INJECTOR 1 square brass Max Press.; 4000 PSI Flow; GPM 3/8 or 1/2 Thread connection Indexed metering screw for consistent, adjustable siphon control (Dial Control Design) Lock-nut on metering screw to hold siphon setting during system vibration Use in 2-fluid application when pre-mix is involved Part # Thread GPM Price SSI /8 1.0 $$ SSI /8 1.5 $$ SSI /8 2.0 $$ SSI /8 2.5 $$ SSI /8 4.0 $$ SSI /8 5.0 $$ SSI /8 6.0 $$ SSI /2 0.5 $$ SSI /2 1.0 $$ SSI /2 1.5 $$ SSI /2 2.0 $$ SSI /2 2.5 $$ SSI /2 3.0 $$ SSI /2 4.0 $$ SSI /2 5.0 $$ SSI /2 6.0 $$ Brass Chemical Injector Ceramic Ball, Stainless Steel Nozzle, Viton Elastomers, High Draw Injector 4500 PSI, 190 F Max Temp, 1/4 Hose, 3/8 M Inlet/Outlet Brass Chemical Injector Teflon Ball, Stainless Steel Nozzle, Viton Elastomers, Hastelloy Spring 4000 PSI, 190 F Max Temp, 3/8 M Inlet/Outlet, 1/4 Hose GPP mm $$ GPP mm $$ GPP mm $$ GPP mm $$ GPP mm $$ GPP mm $$ GPP mm $$ Brass Chemical Injector Stainless Steel Ball, Stainless Steel Nozzle, Viton Elastomers 4000 PSI, 190 F Max Temp, 1/4 Hose, 3/8 M Inlet/Outlet GPP mm $$ GPP mm $$ GPP mm $$ Stainless Steel Chemical Injector Stainless Steel Ball, Stainless Steel Nozzle, Special Elastomers 5500 PSI, 190 F Max Temp, 3/8 M Inlet/Outlet, 1/4 Hose GPP100336S 1.45 mm $$ GPP100334S 2.1 mm $$ GPP100333S 2.2 mm $$ GPP100339S 2.5 mm $$ GPP100541S 2.1 mm $$ 690

5 Water Powered Proportioning Pumps MR569CW MR570CW MR572CW Specifications: Chemically Resistant Nylon - Fiberglass body All seals specifically designed to withstand carwash additives. Easily replaceable wear parts. Extra Lip Seal Piston Kit included with each unit Higher 120 PSI operating range. 2.9 PSI to 120 PSI Optional Tip Kit, p/n for dilutions from 750:1 to 2000:1. Accurate dispensing Uses only 20% of pressure to drive the pump Low maintenance and easy to adjust No special model needed Hose barbs with swivel for easy installation Injection from 300:1 to 1:10 (.3% to 10%) Includes 7 ft. 3/8 inlet tubing with foot valve strainer Check Valve with Hastelloy spring 19 1/2 high, 7 wide All Hastelloy Springs Chemical Shut-off (Models 571,573, 575) Same unit different options MR14CW05 Chemical Tip Kit Options Part # PSI Ratio Percent Oz/Gal GPM Applications Price MR570CW :1 to 50:1.3% - 2%.38 to to 11 Carwash cleaning agents & detergents $$ MR572CW :1 to 25:1.4% to 4%.51 to to 11 Carwash cleaning agents & detergents $$ MR570CL :1 to 50:1.3% to 2%.38 to to 11 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ Chemical On/Off Option MR570CL All Hastelloy Springs All PVDF components 570PVDF Part # PSI Ratio Percent Oz/Gal GPM Applications Price MR571CW :1 to 50:1.3% - 2%.38 to to 11 Carwash cleaning agents & detergents $$ MR573CW :1 to 25:1.4% to 4%.51 to to 11 Carwash cleaning agents & detergents $$ MR571CL :1 to 50:1.3% to 2%.38 to to 11 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ MR572CL :1 to 25:1.4% to 4%.51 to to 11 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ MR573CL :1 to 25:1.4% to 4%.51 to to 11 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ MR1410A :1 to 10:1 1% to 10% 1.28 to Carwash applications, hydrofloric acids, tire cleaners, chlorine $$ MR575CL :1 to 10:1 3% to 10% 3.8 to to 11 Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ MR14CW :1 to 20:1 1% to 5% 1.28 to Hydrofluoric acids, Tire cleaner, Chlorine & other harsh chemicals $$ MR569CLONOFF :1 to 100:1.1% to.9% 1.28 to to 11 Carwash cleaning agents, detergents and rinse additives $$ Accessories Includes 4 Metering Tips, 8ft. 1/4 Vinyl Hose (not shown) and 1/4 x 3/8 barb adapter Part # Description For Model Price MR573VE Chemical Piston Kit 2% 570CW, 571CW $$ MR575VE Chemical Check Valve Kit Viton - $$ MR578VE Chemical Piston Kit 4% 572CW, 573CW $$ MR57111 Tip Kit 570CW, 571CW, 570CL, 571CL $$ MR Mesh Strainer (80 Micron) All Models $$ MR57K02005 Lip Seal & Piston Kit 2% 570CW, 571CW, 570CL, 571CL $$ MR57K04012 Lip Seal & Piston Kit 4% 572CW, 573CW, 572CL, 573CL $$ MR57K10013 Lip Seal & Piston Kit 10% 574CL, 575CL $$ MR57UFR Low Flow Booster - $$ MR /4 Female Strainer - $$ MR Anti-Siphon Kit - $$ 691

6 Hydro Foamer HydroFoamers from Hydro Systems eliminate the time and hassle of manually mixing concentrates, which not only increases labor productivity, but also increases concentrate performance because the solutions are consistently mixed as directed by the manufacturer. Since concentrates are mixed only as they are applied, they are fresh and will perform at peak power, and waste is minimized. 12:1 to 128:1 Dilution Proven, reliable components Non-electric No installation required Compact, easy to store Enhanced safety Maximum cleaning product performance IN481 $$ Volumetric Proportioners SuperDos From the manufacturers of HydroMinder: Hydro Systems Company s water driven injectors deliver accurately diluted chemicals with best in class quality. Highly chemical resistant materials of construction standard on all units Up to 140 PSI pressure rating Patented inner mixing chamber Made in the USA Things to Consider When Choosing your Injector: Water Flow Rate: Knowing the flow rate of your water source is critical to selecting the best water driven injector. Water Line Pressure: Making sure the injector you choose is rated to operate with your facilities water line pressure is critical. Desired Injection Ratio or Percentage: Each Hydro volumetric model lists the range of chemical injection it is capable of supporting. Type of Chemical to be Injected: Hydro Systems volumetric injectors can handle a wide range of chemicals (aggressive, high viscosity, dissolved powders.) We can assist you in selecting the proper injector for your chemistry. MiniDos Model Part # Flow Rate Injection Range PSI Price MiniDos12-0.3% DM GPM 1:4000-1: CALL MiniDos12-1% DM GPM 1:500-1: $$ MinDos12-2.5% DM GPM 1:200-1: $$ SuperDos20-0.3% DM113228R GPM 1:4000-1: CALL SuperDos20-2.5% DM GPM 1:500-1: CALL SuperDos45-0.3% DM113320R GPM 1:4000-1: CALL SuperDos45-2.5% DM GPM 1:500-1: CALL Twist II Clean Filters Part # Price Twist II Clean 3/4" (140 Micron) Twist II Clean 1" (140 Micron) DM $$ DM $$ 692

7 Chemical Proportioners The water-powered Dosatron provides accurate car wash chemical dispensing while cutting your cost-per-car, and the units automatically compensate for flow and pressure changes providing consistent, repeatable results. The new series offers: Metal free and simplified piston Viton seal and o-rings Polypropylene housings Easy-to-adjust ratio stem OPERATING PRINCIPLE Water Flow Blended Solution Mixing Chamber Externally Adjustable Ratios D14MZ-D Car Wash Series Part # Manu. Part # Flow D14MZ3000-D Super Concentrate Car Wash Series Injection Range D25RE1500-D PSI Price DOSD1402 D14MZ2VFDII 0.05 to 14 GPM 500:1-50:1 4.3 to 85 $$ Intake From Concentrate Container Self Serve Panel DOS0138 CALL DOSD1405 D14MZ5AFDII 0.05 to 14 GPM 200:1-20:1 4.3 to 85 $$ DOSD1410 D14MZ10AFDII 0.05 to 14 GPM 100:1-10:1 7 to 85 $$ DOSD1430 D14MZ3000VFDII 0.05 to 14 GPM 3000:1 to 333:1 4.3 to 85 $$ DOSD2515 D25RE1500VFDII 0.05 to 11 GPM 1500:1-500:1 4.3 to 85 $$ Seal Kits Part # Manu. Part# Description Price DOSK1000 PJDI116VF Seal Kit For DOSD1402 $$ DOSK1010 PJDI120HTAF Seal Kit For DOSD1405 $$ DOSK1020 PJDI122HTAF Seal Kit For DOSD1410 $$ DOSED PJ118VF Seal Kit For DOSD2515 $$ DOSPJDI139VF PJDI0139VF Seal Kit for DOSD1430 $$ DOSED252 PJ093VF Seal Kit for D25RE2 $$ Dosa Lock Security Device Dosa Lock is an easy-to-install lock out device that protects unauthorized access to your injector and fits most Dosatron units. The Dosa Lock device includes: Dosa Lock, lock, and key. Replacement lock and key available. DOS1000 CALL 693

CHEMICALS ONE-WASH ( ) fax (662) HYDROMINDERS HYDROMINDER TIP SELECTOR HYDROMINDERS

CHEMICALS ONE-WASH ( ) fax (662) HYDROMINDERS HYDROMINDER TIP SELECTOR HYDROMINDERS 16 HYDROMINDERS HY511 HY572 HY564 HYDROMINDERS VOLUME MOUNTING BRACKET SIPHON HY506 Low Y N HY507 Low N N HY511 Low Y Y () HY5111* Low Y Y 4-5.6 HY525 Medium Y N HY530 Medium Y Y HY561 Medium Y N HY562

More information

AGRICULTURE GREENHOUSE LANDSCAPE

AGRICULTURE GREENHOUSE LANDSCAPE AGRICULTURE GREENHOUSE LANDSCAPE Fertilizer & Chemical proportional water driven injectors, with no ( other energy required I n j e c t o r s A step up from Different Models Applications Fertigation Chlorination

More information

TEFEN FLOW & DOSING TECHNOLOGIES

TEFEN FLOW & DOSING TECHNOLOGIES DOSING PUMPS Agriculture Livestock Industry Order from irrigationglobal.com mixrite dos injectors for livestock medicators. Tefen TEFEN FLOW & DOSING TECHNOLOGIES contact: irrigationglobal.com for orders

More information

I n j e c t o r s. Different Models. Applications Fertigation Chlorination and acidification Water additives ph and EC control

I n j e c t o r s. Different Models. Applications Fertigation Chlorination and acidification Water additives ph and EC control Fertilizer & Chemical proportional water driven injectors, with no ( other energy required I n j e c t o r s A step up from Different Models Applications Fertigation Chlorination and acidification Water

More information

Car Wash / Pressure Washer

Car Wash / Pressure Washer Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask

More information

PRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List

PRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List PRESSURE WASHERS 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Professional 2018 Price List 2018 For more information, contact Lorchem Technologies at: (800)

More information

Parts and Accessories

Parts and Accessories Parts and Accessories For a full list of available pressure washer parts and accessories, visit www.landa.com. 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Hypro

More information

Here s How It Works...

Here s How It Works... Here s How It Works... The Dosatron pulls up solution like a syringe, drawing in the concentrate with the plunger. On the down stroke, the concentrate is displaced into the body of the Dosatron, where

More information

DI GPM Operating Manual

DI GPM Operating Manual DI 16 11 GPM Operating Manual CONTENTS INTRODUCTION... 1 Specifications... 1 Accessories... 2 Operating Principle... 3 BOX CONTENTS... 4 PRECAUTION... 5 Installation... 5 Maintenance... 5 Service... 5

More information

DEMA MODEL 692T FOAM STATION I INSTALLATION INSTRUCTION

DEMA MODEL 692T FOAM STATION I INSTALLATION INSTRUCTION 1. PARTS CHECKLIST: ITEM DESCRIPTION QTY. A. Foam Station Assembly 1 B. #10 Screw & Anchor Kit Set (Total: 4 Screws & 4 Anchors) 1 C. Ceramic Weight 1 D. ¼ ID Tubing & Foot Valve Assembly 1 E. Metering

More information

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.

LUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading. hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI

More information

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560 Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;

More information

DEMA Model 294D Spray Foam INSTALLATION INSTRUCTIONS

DEMA Model 294D Spray Foam INSTALLATION INSTRUCTIONS 1. PARTS A. Foamer Assembly B. Plastic chemical supply tubing w/ foot valve and ceramic weight C. Metering tip kit D. Outlet hose 25 long (optional accessory) E. Shut-off valve (optional accessory) 2.

More information

DEMA MODEL 693T FOAM STATION II INSTALLATION INSTRUCTION

DEMA MODEL 693T FOAM STATION II INSTALLATION INSTRUCTION 1. PARTS CHECKLIST: 2. INSTALLATION: DEMA MODEL 93T FOAM STATION II ITEM DESCRIPTION QTY. A. Foam Station Assembly 1 B. ¼ ID Tubing & Foot Strainer 1 C. 3/ ID Tubing & Foot Strainer 1 D. Ceramic Weight

More information

Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last

Shaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run

More information

Operating Manual. Model 0.4% Model 1% Model 2.5% Model 5% Model 10% Model 20% Fluid Flow Range: 0.03 gpm to 12 gpm* 7 lph to 2,700 lph*

Operating Manual. Model 0.4% Model 1% Model 2.5% Model 5% Model 10% Model 20% Fluid Flow Range: 0.03 gpm to 12 gpm* 7 lph to 2,700 lph* Operating Manual Model 0.4% Model 1% Model 2.5% Model 5% Model % Model 20% Fluid Flow Range: 0.03 gpm to gpm* 7 lph to 2,700 lph* Injection Range Dosage: 0.025% to 20% 1:4000 to 1:5 Operating Pressure:

More information

DEMA Pro-Fill II Sink Dispenser

DEMA Pro-Fill II Sink Dispenser DEMA Pro-Fill II Sink Dispenser MODELS PF652GAP, PF652AG, PF652GAP-2M, & PF652AG-2M Overview The PRO-FILL II Sink Dispenser mixes water with cleaning chemicals and dispenses these solutions. This unit

More information

WATCH GUARD 440 SERIES FLOAT VALVES INSTALLATION INSTRUCTIONS MODELS: T, TX, T, BT,

WATCH GUARD 440 SERIES FLOAT VALVES INSTALLATION INSTRUCTIONS MODELS: T, TX, T, BT, WATCH GUARD 440 SERIES FLOAT VALVES INSTALLATION INSTRUCTIONS MODELS: 440-22T, 440-22TX, 440-23T, 440-23BT, 440-24 Overview The Watch Guard 440 Series of float valves fills and maintains fluids in reservoirs.

More information

DEMA Pro-Fill I Sink Dispenser

DEMA Pro-Fill I Sink Dispenser DEMA Pro-Fill I Sink Dispenser MODELS PF651GAP, PF651AG, PF651GAP-1M, & PF651AG-1M Overview The PRO-FILL I Sink Dispenser mixes water with a cleaning chemical and dispenses the solution into holding containers

More information

AGRICULTURE HORTICULTURE GREENHOUSE

AGRICULTURE HORTICULTURE GREENHOUSE AGRICULTURE HORTICULTURE GREENHOUSE TM TM TM Fertilizer ( Injectors A step up from & Chemical injectors are water driven only, with no other energy required Application Fertigation Water Treatment Supplementation

More information

DEMA 651AG SINGLE-FEED INSTALLATION INSTRUCTIONS

DEMA 651AG SINGLE-FEED INSTALLATION INSTRUCTIONS I. PARTS: A. Dispenser assembly B. 1 pc. 9/16 in. I.D. X 6 ft. vinyl outlet tubing (4 GPM proportioner only). C. 1 pc. 3/8 in. O.D. X 8 ft. vinyl supply tubing, foot valve & ceramic weight. D. 4 pc. #10

More information

DEMA 652 DUO-FEED INSTALLATION INSTRUCTIONS

DEMA 652 DUO-FEED INSTALLATION INSTRUCTIONS I. PARTS: A. Dispenser assembly B. 1 pc. ½ in I.D. X 6 ft. vinyl outlet tubing C. 1 pc. 9/16 in. I.D. X 6 ft. vinyl outlet tubing. D. 2 pc. 3/8 in. O.D. X 8 ft. vinyl supply tubing, foot valve & ceramic

More information

AGRICULTURE HORTICULTURE GREENHOUSE

AGRICULTURE HORTICULTURE GREENHOUSE AGRICULTURE HORTICULTURE GREENHOUSE Fertilizer & Chemical injectors are water driven only, with no ( other energy required I n j e c t o r s A step up from Different Models Application Fertigation Water

More information

GUNS & LANCES. Legacy AP1000 Trigger Guns. MV 920 Gun. Linear Trigger Guns. M407 Trigger Gun. Giant Trigger Guns. Your One Stop Shop for Parts

GUNS & LANCES. Legacy AP1000 Trigger Guns. MV 920 Gun. Linear Trigger Guns. M407 Trigger Gun. Giant Trigger Guns. Your One Stop Shop for Parts Legacy AP1000 Trigger Guns The World s most popular and easiest to repair trigger gun!!! PSI: 4500 Weight: 19 oz 9.802-229.0 353010 AP1000 8.710-414.0 353010W AP1000 Weep 8.704-157.0 109856 Unitized Valve

More information

DEMA RAPID FIRE MODELS 6300, , , , 6310, 6300H 6300E, 6300EH, &6310E INSTRUCTION SHEET

DEMA RAPID FIRE MODELS 6300, , , , 6310, 6300H 6300E, 6300EH, &6310E INSTRUCTION SHEET I-1002 Pg. 1 of 12 PURPOSE: The RAPID FIRE is a spray system designed with a single knob to control OFF, RINSE and up to two chemicals using a single chemically resistant plastic injector. There is full

More information

HIGH PRESSURE SPRAY GUNS &ACCESSORIES

HIGH PRESSURE SPRAY GUNS &ACCESSORIES HIGH PRESSURE SPRAY GUNS &ACCESSORIES Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Built in hose swivel Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Max. PSI: 4000

More information

Reliability. Versatility

Reliability. Versatility WHO WE ARE Reliability General Pump products have been industry-tested world-wide for 35 years. General Pump is affiliated with the world s largest manufacturer of high-pressure water plunger pumps and

More information

AGRICULTURE HORTICULTURE GREENHOUSE

AGRICULTURE HORTICULTURE GREENHOUSE AGRICULTURE HORTICULTURE GREENHOUSE TM TM TM Fertilizer ( Injectors A step up from & Chemical injectors are water driven only, with no other energy required Application Fertigation Water Treatment Supplementation

More information

Your One Stop Shop for Parts GUNS & LANCES

Your One Stop Shop for Parts GUNS & LANCES Your One Stop Shop for Parts 7 Legacy AP1000 Trigger Guns The World s most popular and easiest to repair trigger gun!!! PSI: 4500 Weight: 19 oz 9.802-229.0 353010 AP1000 8.710-414.0 353010W AP1000 Weep

More information

AGXCEL GX12i CHEMICAL INJECTOR 2% INJECTOR UNIT - PN# % INJECTOR UNIT - PN# E 6TH ST KEARNEY NE

AGXCEL GX12i CHEMICAL INJECTOR 2% INJECTOR UNIT - PN# % INJECTOR UNIT - PN# E 6TH ST KEARNEY NE AGXCEL GX12i CHEMICAL INJECTOR 2% INJECTOR UNIT - PN#20202 5% INJECTOR UNIT - PN#20556 116 E 6TH ST KEARNEY NE 68847 877.218.1981 #1 Table of Contents System Contents... 3 3 Specifications... 4 4 and Tips...

More information

SINGLE-STAGE INJECTOR MODELS 200-3C, 200C, 201C, 202C, 203C, 204C, 206C, 208C

SINGLE-STAGE INJECTOR MODELS 200-3C, 200C, 201C, 202C, 203C, 204C, 206C, 208C D E M A SINGLE-STAGE MODELS SINGLE-STAGE MODELS 1. PARTS A. Injector B. Backup washer (Models 204C & smaller). C. Ceramic Weight. D. Tubing 8 long w/ foot strainer. E. Three brass nozzle bushings Metering

More information

1150 Davis Road, Suite J Elgin, IL (800)

1150 Davis Road, Suite J Elgin, IL (800) www.landa.com Pressure Washer Equipment Detergents Parts & Accessories 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com yamada Pumps Air-powered double diaphragm

More information

DEMA Global Headquarters

DEMA Global Headquarters www.demaeng.com STRATEGY STATEMENT Customized Solutions Cultural Commitment To sustainably grow by offering the best customized chemical dispensing and fluid control solutions Industry Expertise based

More information

AGRICULTURE HORTICULTURE GREENHOUSE

AGRICULTURE HORTICULTURE GREENHOUSE AGRICULTURE HORTICULTURE GREENHOUSE Fertilizer & Chemical injectors are water driven only, with no ( other energy required I n j e c t o r s A step up from Different Models Application Fertigation Water

More information

Pounds Per Square Inch (PSI)

Pounds Per Square Inch (PSI) Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be

More information

CAR WASH BAY ACCESSORIES

CAR WASH BAY ACCESSORIES CAR WASH BAY ACCESSORIES Yamada Pumps Air-powered double diaphragm pump, Reliable Performance Since 1905. The answer to difficult product transfer problems. Air-drive allows freedom from electrical hazards

More information

CARWASH BAY ACCESSORIES

CARWASH BAY ACCESSORIES Yamada Pumps Air-powered double diaphragm pump, Reliable Performance Since 1905. The answer to difficult product transfer problems. Air-drive allows freedom from electrical hazards or explosion-proof motor

More information

DEMA SPRAY CLEAN MODELS: 241CDF & 241CDFT INSTALLATION INSTRUCTIONS

DEMA SPRAY CLEAN MODELS: 241CDF & 241CDFT INSTALLATION INSTRUCTIONS 1. PARTS A. Bottle holder and injector assembly. B. Spray gun (Model 40-8B). C. 4 mounting screws in envelope. 2. INSTALLATION Mount the bottle holder on wall using the 4 screws provided through the plates

More information

& Car Care Dispensers

& Car Care Dispensers CAR WASH & Car Care Dispensers Full solution to dispense Car Care Chemicals `~ê=t~ëü= fåíéöê~íéç=mìãéë péê~óáåö= bèìáéãéåíë t~ëíé=ï~íéê cç~ãáåö= bèìáéãéåíë oéñáääáåö= bèìáéãéåíë SEKO Present the largest

More information

CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING

CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING AIR SPRAY NOZZLES CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING C1 AIR NOZZLES INTRODUCTION LARGEST SELECTION OF NOZZLES IN

More information

Pounds Per Square Inch (PSI)

Pounds Per Square Inch (PSI) Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be

More information

DEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS

DEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS I. PARTS: A. 1 pc. Cyclone Portable Injector B. 1 pc. Foot Strainer & 1/4" I.D. Tubing. C. 1 pc. Ceramic Weight. D. 1 pc. Instruction Sheet D. 2 pc. 3 hose w/ female x female GHT fittings on both ends

More information

DEMA BLEND CENTER MODELS: 637GAP-1 and 637GAP-4 INSTALLATION INSTRUCTIONS

DEMA BLEND CENTER MODELS: 637GAP-1 and 637GAP-4 INSTALLATION INSTRUCTIONS 1. PARTS CHECKLIST: ITEM DESCRIPTION QTY. A. Blend Center Assembly 1 B. ¼ ID X 8 Long Vinyl Supply Tubing & Foot Valve Assembly 4 C. Ceramic Weight 1 D. ½ ID X 6 Long Vinyl Outlet Tubing (For 1 GPM Station

More information

Low Pressure Series - Accessories. High Pressure Series - Accessories

Low Pressure Series - Accessories. High Pressure Series - Accessories Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray

More information

DEMA MODELS 606T INSTALLATION INSTRUCTIONS

DEMA MODELS 606T INSTALLATION INSTRUCTIONS I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit TABLE 1 Hose I.D. 3/8" 1/2" 5/8" Max. Length 15 ft.

More information

Agxcel GX12i Chemical Injection System

Agxcel GX12i Chemical Injection System Agxcel GX12i Chemical Injection System Table of Contents System Contents... 3 Specifications... 4 Safety Precautions and Tips... 5 Operations... 6 Installation... 7 Maintenance... 8-9 Troubleshooting...

More information

0.7 m 3 /h - 3 GPM D 07 RE 125 D 07 RE 5. owner s manual

0.7 m 3 /h - 3 GPM D 07 RE 125 D 07 RE 5. owner s manual 0.7 m 3 /h - 3 GPM D 07 RE 125 D 07 RE 5 owner s manual GB You have just become the owner of one of the latest in the line of DOSATRON proportional dosing pumps and we congratulate you on your choice.

More information

POWERFLO EQUIPMENT & MACHINERY RANGE

POWERFLO EQUIPMENT & MACHINERY RANGE POWERFLO EQUIPMENT & MACHINERY RANGE POWERFLO EQUIPMENT An Overview Of The Benefits Compared to traditional high or low pressure systems, or cleaning equipment and practices commonly seen in New Zealand

More information

DEMA SPRAY STATION II MODEL 606T-2 INSTALLATION INSTRUCTIONS

DEMA SPRAY STATION II MODEL 606T-2 INSTALLATION INSTRUCTIONS The 0T-2 Spray Station II Dispensers are used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional

More information

INSTALLATION INSTRUCTIONS DEMA BLEND CENTER MODEL B-GAP, T-GAP

INSTALLATION INSTRUCTIONS DEMA BLEND CENTER MODEL B-GAP, T-GAP 1. PARTS: ITEM DESCRIPTION QTY. A. Blend Center Assembly 1 B. ¼ ID X 8 Long Vinyl Supply Tubing & Foot Valve Assembly 1 C. Ceramic Weight 1 D. ½ ID X 6 Long Vinyl Outlet Tubing (For 4 GPM Station Only)

More information

Pulsation Dampeners NEW! Wanner Engineering Inc

Pulsation Dampeners NEW! Wanner Engineering Inc Pulsation Dampeners NEW! Wanner Engineering Inc Pulsation Dampeners Positive Displacement (PD) pumps create pulsation and hydraulic shock due to the reciprocating nature of their stroking action, potentially

More information

Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve

Model RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief

More information

Roll Length (Feet) 6300 Polyethylene Pipe

Roll Length (Feet) 6300 Polyethylene Pipe IRRIGATION Item # Description Tube Length Unit 6291 24" Per Aqua Turret Complete 6293 30" Per Set (comes with pre-cut 6295 36" Per tubing, brass insert & 6297 48" Per aqua turret) 6299 60" Per 6274 Aqua

More information

TABLE 1-1 GPM FLOW RATE PROPORTIONER, 1/4 I.D. TUBING Injection Rates For Viscosities Shown Metering Tip Color

TABLE 1-1 GPM FLOW RATE PROPORTIONER, 1/4 I.D. TUBING Injection Rates For Viscosities Shown Metering Tip Color Blend Safe II Dispensing System is a modular, locking dispensing system that allows user to dispense chemicals safely, control dispenser inventory and has the flexibility in the field to meet changing

More information

Spray & Foam Dispenser Item #

Spray & Foam Dispenser Item # Spray & Foam Dispenser Item #92364-00 Spray & Foam Dispenser Item #92364 Table of Contents Section Page 1. Spray & Foam Dispenser Description... 3 2. Spray & Foam Dispenser Installation... 4 3. Chemical

More information

VEHICLE WASH CATALOG VOLUME

VEHICLE WASH CATALOG VOLUME VEHICLE WASH CATALOG VOLUME 3 www.hydraflexinc.com 952-808-3640 952-808-3640 www.hydraflexinc.com 53 INDEX ABOUT US CHEMICAL DISPENSING SYSTEMS Aqua-Lab System Benefits Next Generation Features Aqua-Lab

More information

ProMax QuickJet Spray Nozzles. For trouble-free performance and fast maintenance. Experts in Spray Technology. Spray Nozzles.

ProMax QuickJet Spray Nozzles. For trouble-free performance and fast maintenance. Experts in Spray Technology. Spray Nozzles. Experts in Technology Nozzles Control Analysis Fabrication ProMax QuickJet Nozzles For trouble-free performance and fast maintenance Overview Quick-change spray technology ensures trouble-free performance

More information

Meridian TM EC and DRC Series. Pneumatic Actuators

Meridian TM EC and DRC Series. Pneumatic Actuators Meridian TM EC and DRC Series Pneumatic Actuators The Meridian TM Pneumatic Actuator DRC Series Features & Benefits: The Meridian TM Pneumatic Actuator has proven to be the most reliable actuator by providing

More information

F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads

F20 Series. Maximum Flow Rate: 1.0 gpm (3.8 l/min) Maximum Pressure: 1500 psi (103 bar) for Metallic Pump Heads F2 Series Maximum Flow Rate: 1. gpm (3.8 l/min) Maximum Pressure: 15 psi (13 bar) for Metallic Pump Heads F2 Series Performance Capacities Max. Max. Flow Input @ 1 psi (69 bar) Model rpm gpm l/min F2-E

More information

STAINLESS STEEL DETERGENT INJECTOR AW

STAINLESS STEEL DETERGENT INJECTOR AW STAINLESS STEEL DETERGENT INJECTOR AW-8000-0001 OPERATING INSTRUCTIONS & PARTS LIST CAUTION RISK OF INJURY! READ ENTIRE MANUAL BEFORE OPERATING! THIS MANUAL IS AN IMPORTANT PART OF THE INJECTOR AND MUST

More information

Process Equipment. Air-Operated Pumps for Process Industries

Process Equipment. Air-Operated Pumps for Process Industries Process Equipment Air-Operated s for Process Industries Superior ing Technology 55 Gallon Drum Transfer and Supply from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer

More information

HD 3.0/20 C Ea. Easy press trigger gun. Patented anti-twist system. Outstanding mobility. Telescopic push handle

HD 3.0/20 C Ea. Easy press trigger gun. Patented anti-twist system. Outstanding mobility. Telescopic push handle Cold water pressure washer for daily commercial use. With compact dimensions, solid construction and excellent manueverability, this unit is one of the most versatile in the compact class. 1 Easy press

More information

DEMA MIXRITE PROPORTIONING PUMP MODELS 574 & CL & 575CL FOR CORROSIVE LIQUID CHEMICALS INSTALLATION INSTRUCTION.

DEMA MIXRITE PROPORTIONING PUMP MODELS 574 & CL & 575CL FOR CORROSIVE LIQUID CHEMICALS INSTALLATION INSTRUCTION. 10% MixRite Pump I-871 Page 1 MODEL # INDUCTION RANGE%* TECHNICAL DATA TABLE Ability to turn off INDUCTION the chemical flow RANGE RATIO* while water is running OPERATING TEMPERATURE 574 3% to 10% 33/1

More information

D/G-12 Series. Up to 8 gpm (30.3 l/min)

D/G-12 Series. Up to 8 gpm (30.3 l/min) D/G-12 Series Up to 8 gpm (3.3 l/min) D/G-12 Vertical Applications The D/G-12 is specifically designed for vertical pumping installations such as machine tool cooling applications. D/G-12 shown with Hydra-Cell

More information

by Instrumentation Pumps 1 / 8

by Instrumentation Pumps 1 / 8 600-000 by Instrumentation Pumps 1 / 8 1. Safety Requirements... 3 2. Pump Mounting... 3 3. General Set Up... 4 3.1. Quick Start... 4 3.2. Speed... 5 3.3. Fluidics... 5 4. Maintenance... 5 4.1. Idle Position...

More information

Spray Nozzle. QuickJet and Systems/Components. Features and Benefits. Accessories

Spray Nozzle. QuickJet and Systems/Components. Features and Benefits. Accessories Efficient QuickJet and Systems are designed to save time in the cleaning and replacement of plugged or worn spray tips. Key feature overview for QuickJet Systems: Reduce maintenance downtime and costs

More information

DEMA SPRAY CLEAN DISPENSERS MODEL 605T INSTALLATION INSTRUCTION

DEMA SPRAY CLEAN DISPENSERS MODEL 605T INSTALLATION INSTRUCTION The 605T Spray Clean Dispenser is used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional

More information

DEMA SINGLE-FEED MODEL: 651GAP& 651GAP-1 INSTALLATION INSTRUCTIONS

DEMA SINGLE-FEED MODEL: 651GAP& 651GAP-1 INSTALLATION INSTRUCTIONS The Model 65GAP is designed to dispense one product into a kitchen sink with the turn of a ball valve. I. PARTS: ITEM DESCRIPTION QTY. A Dispenser Assembly B ½ ID X 6 Long Vinyl Outlet Tubing (For 4 GPM

More information

PROMAX INSTRUCTION MANUAL

PROMAX INSTRUCTION MANUAL PROMAX INSTRUCTION MANUAL One Hand Activation Single Product [1 gpm (4l/m) models only] One Hand Activation 4 Product [1 gpm (4l/m) models only] Button Activation Single Product [1, 4, 8 gpm (4, 16, 30

More information

DEMA SPRAY CLEAN MODELS: 244CDF & 244CDFT INSTALLATION INSTRUCTIONS

DEMA SPRAY CLEAN MODELS: 244CDF & 244CDFT INSTALLATION INSTRUCTIONS I. PARTS: A. Injector. B. Spray gun. C. Mounting screws and washers. D. Vinyl supply tubing, foot strainer & ceramic weight. E. Metering tip (specified size, model 244CDFT only). II. INSTALLATION: (See

More information

Spray Clean 606T-2 Installation Instruction

Spray Clean 606T-2 Installation Instruction Spray Clean 606T-2 Installation Instruction Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.

More information

HYPRO. ProFlo. Nozzle Bodies with Superior Durability and High Flow Rates

HYPRO. ProFlo. Nozzle Bodies with Superior Durability and High Flow Rates HYPRO ProFlo Nozzle Bodies with Superior Durability and High Flow Rates WWW.HYPROSPRAYTIPS.COM HYPRO ProFlo Wet boom clamp sizes: 1 2, 3 4, 1, 20mm, 22mm, 25mm Turret-indexing design for improved consistency

More information

Fertigation. Injectors AirJection Injectors Suction and Bypass Kits Parts & Accessories FERTIGATION FERTIGATION

Fertigation. Injectors AirJection Injectors Suction and Bypass Kits Parts & Accessories FERTIGATION FERTIGATION Fertigation Injectors...207 AirJection Injectors...209 Suction and Bypass Kits...210 Parts & Accessories...211 205 206 Injectors Injector Product Range - Models and Kit Assemblies Injector Model Numbers

More information

Control Valves/Meters Grease

Control Valves/Meters Grease Grease 740 WARNING Lincoln Control Valves, Meters and Accessories Provide the Durability and Precision You Need for Your Lubrication Systems. Whip Hoses Models 3029, 3034, 5812, 5818, 5861, 81725, 81726,

More information

115 Series, Needle Valves, Single Block, Male x Male

115 Series, Needle Valves, Single Block, Male x Male 115 Series, Needle Valves, Single Block, Male x Male Conformance Standards NACE MR0175 / ISO 15156, NACE MR0103 / ISO 17495 CRN (Canadian Registration Number) Approved/Registered ASTM B31.3 Process Piping,

More information

GUNS & LANCES. Linear Trigger Guns. Legacy Best Trigger Guns. Legacy Industrial Trigger Guns. Giant Trigger Guns. PA Trigger Guns.

GUNS & LANCES. Linear Trigger Guns. Legacy Best Trigger Guns. Legacy Industrial Trigger Guns. Giant Trigger Guns. PA Trigger Guns. Legacy Best Trigger Guns The most comfortable and longest lasting gun on the market!!! Weight: 21 oz Ideal for commercial cleaning & long work time applications. Quantity price breaks at 10 and 25 guns

More information

DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS

DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit E. 1 Pc.

More information

CenterFlo Pumps. Air Operated Double Diaphragm (AODD) Pumps. Automotive Commercial Industrial

CenterFlo Pumps. Air Operated Double Diaphragm (AODD) Pumps. Automotive Commercial Industrial CenterFlo Pumps Air Operated Double Diaphragm (AODD) Pumps Automotive Commercial Industrial CenterFlo NEW CenterFlo Technology Diaphragm Pumps Advanced Technology, Superior Performance, Low Maintenance.

More information

PRODUCT TITRATION & PROPORTIONING

PRODUCT TITRATION & PROPORTIONING Chapter 9 PRODUCT TITRATION & PROPORTIONING 95 Product Titration & Proportioning Titration is the process by which we determine the strength of a cleaning solution. This test will indicate the ratio of

More information

Owner's Manual. Model: SK-61-4R ( ) (60 Gallon Skid Sprayer w/2.5 H.P. Engine, 4-Roller Pump, Deluxe Handgun) Technical Specifications

Owner's Manual. Model: SK-61-4R ( ) (60 Gallon Skid Sprayer w/2.5 H.P. Engine, 4-Roller Pump, Deluxe Handgun) Technical Specifications Owner's Manual Model: SK--R (0) (0 Gallon Skid Sprayer w/. H.P. Engine, -Roller Pump, Deluxe Handgun) Technical Specifications. H.P. Recoil Start Engine Roller Pump - G.P.M. Pressure Relief Valve Pressure

More information

OPERATOR S MANUAL. To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit

OPERATOR S MANUAL. To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit OPERATOR S MANUAL MODEL ORDER # MODEL HD 2.0/10 Ed 1.575-250.0 DE-201007D HD 1.9/15 Ed 1.575-251.0 DE-201507D HD 2.8/10 Ed 1.575-252.0 DE-301007D HD 3.5/20 Ea 1.575-253.0 DE-352007A To locate your local

More information

Spray Guns. Choice of Materials and Capacities

Spray Guns. Choice of Materials and Capacities For spot spraying, tree spraying, livestock spraying and power washing at pressures from 30 to 800 PSI. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,

More information

INFG-2R 10/10. Gemini & Infinity. Finishing Pumps & Equipment

INFG-2R 10/10. Gemini & Infinity. Finishing Pumps & Equipment INFG-2R 10/10 Gemini & Infinity Finishing Pumps & Equipment Pump Basics for Smooth Operation Fluid Characteristics Influence Pump Selection Consider the following fluid characteristics when choosing your

More information

GUNJET NUMBER AA143-AL-*-10 A C A C

GUNJET NUMBER AA143-AL-*-10 A C A C For spot spraying, tree spraying, livestock spraying and power washing at pressures from 2 to 55 bar. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,

More information

DEMA SPRAY CLEAN MODELS: 244BC, 244BCE, 244BCP & 244BCT INSTALLATION INSTRUCTIONS

DEMA SPRAY CLEAN MODELS: 244BC, 244BCE, 244BCP & 244BCT INSTALLATION INSTRUCTIONS I. PARTS: A. Injector. B. Spray gun. C. Mounting screws and washers. D. Vinyl supply tubing, foot strainer & ceramic weight. E. Metering tip (specified size, model 244BCT only). II. INSTALLATION: (See

More information

ICS Integrated Cleaning System. Rechargeable Battery

ICS Integrated Cleaning System. Rechargeable Battery ICS 8900 Integrated Cleaning System Rechargeable Battery THANK YOU FOR CHOOSING OUR PRODUCTS Hydro Systems manufactures quality chemical proportioners. Please use this equipment carefully and observe all

More information

MODEL 106F TEFLON LIQUID FLOW SENSOR

MODEL 106F TEFLON LIQUID FLOW SENSOR TEFLON LIQUID FLOW SENSOR [ Advanced microturbine design for repeatable results - with no particle shedding & no zero drift [ Compatible with solvents, deionized water, acids, CMP slurries, etc. [ Extremely

More information

DEMA 258BD-200C and 258BT-200C DRAIN MASTER Jr. INSTALLATION INSTRUCTION SHEET

DEMA 258BD-200C and 258BT-200C DRAIN MASTER Jr. INSTALLATION INSTRUCTION SHEET I-736 Pg. 1 of 10 Summary The 258BD-200C Drain Master is designed to feed chemicals into drains and grease traps to break up grease, detergent buildup and eliminate odors. The 258BT-200C Trash Master is

More information

LD Series Electronic Meters

LD Series Electronic Meters LD Series Electronic Meters Manual and Preset Dispense Dispenses in gallons, quarts, pints and liters Easy to read LCD display with durable switches for long life Rugged engineered material for superior

More information

Strahman. Since Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories

Strahman. Since Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories Strahman Strahman full line catalogue Hoses Nozzles Hot Water Makers Mixing Units & Accessories Accessories Since 1964 675 The Parkway Peterborough, ON K9J 7K2 1-800-361-5361 705-743-5361 Catalogue Strahman

More information

DATA SHEET 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER DIRECT DRIVE PLUNGER PUMPS. Brass Electric Models: SPECIFICATIONS U.S. Measure Metric Measure

DATA SHEET 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER DIRECT DRIVE PLUNGER PUMPS. Brass Electric Models: SPECIFICATIONS U.S. Measure Metric Measure DATA SHEET DIRECT DRIVE PLUNGER PUMPS Brass Electric Models: 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER See page 8 for complete pump model number selection. FEATURES Fits standard 56C face motors. Stacked

More information

LOC-LINE the original modular coolant hose system

LOC-LINE the original modular coolant hose system endless solutions, flexibility & performance COOLANT CONTROL LOC-LINE the original modular coolant hose system 8 1 9 8 6 13 4 The combinations and flexibility offered by Loc-Line shows that whatever your

More information

Chemical disc filters, Arkal Amiad, w w w. a r k a l - f i l t e r s. c o m

Chemical disc filters, Arkal Amiad,   w w w. a r k a l - f i l t e r s. c o m Manual Filters For Chemical Use Chemical disc filters, Arkal Amiad, www.irrigationglobal.com w w w. a r k a l - f i l t e r s. c o m Arkal ¾ Filter for Chemical Use Catalog No. 1070 1 _ Filtration Grades

More information

ALLSTAR DILUTION CONTROL SYSTEM MODEL 639AG-4-1ABC

ALLSTAR DILUTION CONTROL SYSTEM MODEL 639AG-4-1ABC MODEL 639AG-4-1ABC 1. PARTS: A. Blend Center assembly B. 5 pc. 1/4 ID x 8 ft. long vinyl supply tubing, with foot valve & ceramic weight C. 1 pc. 1/2 ID x 6 ft. long vinyl outlet tubing D. 2 pc. #8 pan

More information

DEMA BLEND CENTER MODELS: 633GAP INSTALLATION INSTRUCTIONS

DEMA BLEND CENTER MODELS: 633GAP INSTALLATION INSTRUCTIONS The 633GAP Series Blend Center modular design lets you easily couple together any number of stations to create a system that meets your specific needs. Mix and match both high and low flow units for filling

More information

Chemical and Petrochemical Process

Chemical and Petrochemical Process Seal-less Pump Technology Chemical and Petrochemical Process Rugged reliability with precision Chemical and Petrochemical Industry Compact seal-less Hydra-Cell pumps for long life and high reliability.

More information

DEMA MODEL 603T-WI INSTALLATION INSTRUCTIONS

DEMA MODEL 603T-WI INSTALLATION INSTRUCTIONS DEMA MODEL 603T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (603T Only) E. 1 Pc. Backflow Preventer

More information

Doorway Foamer. Packers Chemical 3729 Peddle Hollow Rd Kieler Wi, Phone Fax

Doorway Foamer. Packers Chemical 3729 Peddle Hollow Rd Kieler Wi, Phone Fax Doorway Foamer Packers Chemical 3729 Peddle Hollow Rd Kieler Wi, 53812 Phone 608.568.3841 Fax 608.568.7582 Doorway Foamer SAFETY As with any equipment of this type, when electricity and chemicals are involved,

More information

SOLUTION STATION Instruction Manual

SOLUTION STATION Instruction Manual SOLUTION STATION Instruction Manual WAXIE Sanitary Supply 9353 WAXIE Way San Diego, CA 92123 Phone: 800.995.4466 www.waxie.com TABLE OF CONTENTS Unpacking Instructions Disclaimer..... Warranty... Introduction...

More information

INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS. 143

INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS.  143 8 INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS www.charlandthermojet.com 143 T-70 SERIES INDUSTRIAL AUTOMATIC SPRAY NOZZLE GUN Ideal for many cleaning tasks in every kind of industrial

More information