Service Inspection. 5 minutes. 5 min SERVICE INSPECTION FRONT LOADER

Transcription

1 SERVICE INSPECTION FRONT LOADER 5 min Service Inspection 5 minutes Q20 - Q50, Q21 - Q51 Q60, Q61 Q25 - Q55, Q26 Q58 Q65 - Q85, Q66 Q , T , ,0P P, +1,1P P +5,0P P, +5,1P P

2 Inspection Pins x 4 x 4 x 4 x 4 x 4 x SERVICE INSPECTION 5 MINUTES

3 Inspection Bushings x SERVICE INSPECTION 5 MINUTES

4 Inspection Hydraulics 1 2 SERVICE INSPECTION 5 MINUTES

5 Inspection Loadsuspension 1 ON OFF ON OFF 5! SERVICE INSPECTION 5 MINUTES

6 Inspection Joystick < 16 mm (0,63 in) > 16 mm (0,63 in) SERVICE INSPECTION 5 MINUTES

7 Recommended Spare Parts For access to the complete range visit our Spare part viewer at our homepages or Bushing and pin kits Quicke Dimension and Trima Plus Series: ARTIKELNR. ITEM NO ARTIKELBESKR. ITEM DESC PASSAR FITS TO: TILL: Bushing kit Q20 - Q50, Q21 - Q , T Bushing kit Q60, Q , Bushing kit Q25 - Q55, Q26 Q58 +1,0P P, +1,1P P Bushing kit Q65 - Q85, Q66 Q98 +5,0P P, +5,1P P Pin kit Q20 - Q50, Q21 - Q , T Pin kit Q60, Q , Pin kit Q25 - Q55, Q26 Q58 +1,0P P, +1,1P P Pin kit Q65 - Q85, Q66 Q98 +5,0P P, +5,1P P ARTIKELNR. ITEM NO ARTIKELBESKR. ITEM DESC Greaser Cover Black Locking Cover Screw RECOMMENDED SPARE PARTS

8 Control cables Our Control cables have significant less internal gap compared to similar cables even in the longest and most complex cable routings. The design also make them smooth to push/pull. This gives outstanding control when needed in precision work. Ø ±2 ITEM NO ITEM DESC LENGTH QUICKE TRIMA YEAR Cable L=1200mm Cable L=1400mm Cable L=1600mm Cable L=1800mm Cable L=2000mm Cable L=2200mm Cable L=2400mm Cable L=2600mm Cable L=2800mm Cable L=3000mm Cable L=3200mm Ø Ø 8 25±2 ITEM NO ITEM DESC LENGTH QUICKE TRIMA YEAR Cable L=800mm Cable L=1000mm Cable L=1200mm ( ) Cable L=1400mm ( ) Cable L=1600mm ( ) Cable L=1800mm ( ) Cable L=2000mm ( ) Cable L=2200mm ( ) Cable L=2400mm ( ) Cable L=2600mm ( ) Cable L=2800mm ( ) Quicke Trima Cable L=3000mm ( ) Cable L=3200mm ( ) RECOMMENDED SPARE PARTS

9 Holder kit Lever indicator holder kit. Four versions depending of cylinder barrel size. ITEMNO ITEM DESC Ø (MM) FITS TO Level indicator holder kit 60, 70, 80, 85 Dimension and Plus series, Versa X, 200, Level indicator holder kit 70, 80, 90, 95 Dimension and Plus series, Versa X, 200, Level indicator holder kit 90, 100, 110 Dimension and Plus series, Versa X, 200, Level indicator holder kit 65, 75, 85, 90 Dimension and Plus series, Versa X, 200, 100 Plastic covers Plastic covers to the Quicke Dimension and Trima Plus series ITEM NO ITEM DESC QUICKE TRIMA Cross Beam Cover, Size 1 2x-4x 1.x-3.x Cross Beam Cover, Size 2 5x-6x 4.x-5.x Cross Beam Cover Size 3 7x-9x 6.x-8.x Quicke Decal - Cross Beam Cover Trima Decal - Cross Beam Cover Hose Clamp Lh US, DS and DM US, DS and DM Hose Clamp Rh US, DS and DM US, DS and DM Hose Clamp Lh DL and DXL DL and DXL Hose Clamp Rh DL and DXL DL and DXL Valve Cover All models All models Quicke Decal - Valve Cover Trima Decal - Valve Cover Greaser Cover Black All models All models Trima Decal - Cross Beam Cover Quicke Decal - Valve Cover Greaser Cover Black Valve Cover Cross Beam Cover Hose Clamp RECOMMENDED SPARE PARTS

10 Accumulators With load damping you can drive the tractor faster without losing control. For optimal performance and comfort the accumulators must be replaced when the pre-charge pressure has dropped due to normal Gas Permeation or damaged by other cause. ITEM NO ITEM DESC PRECHARGE SETTING (BAR) CAPACITY (LITRE) Accumulator 0.5l-15bar R1/2 15 0, Accumulator 0.5l-22bar R1/2 22 0, * Accumulator Lcs 0,5l 15 Bar 15 0, Accumulator 0.5l-20bar R1/2 20 0, Sealing Washer Gbr 1/ ** Accumulator Bracket Size 1 (S) ** Accumulator Bracket Size 2 (M) ** Accumulator Bracket Size 3 (L) **The plastic bracket have 3 different size depending of the diameter of the cross tube at the loader. RECOMMENDED SPARE PARTS

11 Joystick parts ERGODRIVE Ø Ø ELECTRODRIVE Electrodrive Easydrive LCS A A B A B B L= L= L= RECOMMENDED SPARE PARTS

12 Ålö AB Brännland 300, SE Umeå, Sweden Tel: +46 (0) Some of the products are not available on all markets. Working with front loaders and accompanying implements is not without risk. Serious injuries to people and damage to materials can occur in the event of incorrectly carried out work. Show consideration to your surroundings, use common sense and comply with local laws and regulations. Always read carefully through the instruction manual supplied. Only use original spare parts and accessories. Ålö s product range is continually being developed. We reserve the right at any time to alter specifications, prices and versions with no obligation on our part., Trademarks of Ålö AB. Part number: EN Arkitektkopia