t 95 kw (130 hp) m 3. WheelED Excavator 150W.

Transcription

1 t 95 kw (130 hp) m 3 STABLE. STRONG. STEADY. WheelED Excavator 150W

2 Technical INFORMATION 150W Technical Information ENGINE Power rating...95 kw (130 hp) RPM /min Make/model...Deutz TCD 4.1 (Tier 4 Final) Design...Turbocharger/LLK Cylinder capacity cm 3 Number of cylinders...4 Borehole/lift...101/126 Cooling system...water-cooled Air filter...dry air filter Battery...2x 12V 2x100 Ah Alternator...24V / 100 Ah Starter...24 V / 4 kw HYDRAULIC SYSTEM AWE 5 system (Load sensing) Suction valves for all work functions 2 additional circuits for additional consumer Load limit controlled high-performance pump Fuel-efficient flow-on-demand control Sensitive, proportional, independent control Primary and secondary protection against overload Load-retaining and fine lowering valves in lifting circuit Pipe break protection valves for lifting and articulated cylinders Grab / grab-rotating function equipped as standard loads possible Max. oil flow l/min Max. operating pressure bar Operating modes: 3 pre-programmed modes (Fine, Eco, Power) SWING ASSEMBLY A hydrostatic drive with a 2-tier planetary gear and an axial piston motor acts like a wear-resistant service brake. Additional spring-mechanism multi-disc brake as a parking brake. Axial piston motor with priority valve Planetary transmission Automatically controlled multi-disc brake Max. swing speed...9/min Swing torque knm TRACTION DRIVE AND BRAKES Variable displacement motor Power-shift transmission Double-acting brake valve Driving direction pre-selection via buttons in joystick Automotive drive and cruise control: Maximum speed...20 km/h Terrain speed...5 km/h High-speed execution...35 km/h Tractive force kn Max. gradeability...60% Dual circuit brake system...multi-disc Parking brake...multi-disc ZF axles UNDERCARRIAGE 28 t special excavator axles Steering axle with automatic oscillating axle blocking 8 tyres tyres (optional) FILL CAPACITIES Fuel tank litres Cooling system litres Engine oil litres Hydraulic tank litres Hydraulics system litres Ad Blue litres DRIVER S CAB Meets latest safety standards ROPS Extra large entry zone Spacious leg room Excellent circumferential visibility Preparation for radio installation with mute function DRIVER S SEAT: Air-cushioned comfort seat (optional seat heating) Arm rests and lumbar support Seat adjustable separately from console CONTROL: Ergonomic joysticks with proportional slide control Slim steering column, height and tilt adjustable Indicators, controls and operating switches are clearly arranged MONITORING: Operating data appears display Automatic system for monitoring, warning and storage of data CLIMATE CONTROL: Air conditioning with Climatronic Very good air distribution through optimally arranged nozzles SOUND LEVELS: ISO 6396 (L p A) in driver's cab...70 db(a) 2000/14EG (L w A) ambience level...97 db(a) 2 WheelED Excavator 150W

3 WORKING EQUIPMENT 150W Equipment OPERATING WEIGHTS Monoblock boom 4.32 m (C6.3M) ADJUSTABLE BOOM Base arm 1.87 m (C6.41) Boom 3.10 m (C6.46) Stick 2.15 m (D6.2) Stick 2.65 m (D6.3) Stick 2.15 m (D6.2) Stick 2.65 m (D6.3) Support dozer blade blade / outriggers 4 support outriggers 15.3 t 16.3 t 16.5 t 15.4 t 16.4 t 16.6 t 15.6 t 16.7 t 16.9 t 15.7 t 16.8 t 17.0 t Operating weight with driver, completely filled implement and 1 ton for attachments. EQUIPMENT BASIC DEVICE Atlas 150W (can be combined) Wheel excavator 150W with support and dozer blade (SDB) and 2 lifting cylinders (A 5.2) Wheel excavator 150W with quadruple claw support and 2 lifting cylinders (A 5.32) Wheel excavator 150W with blade on rigid axle, 2 outriggers on steering axle and 2 lifting cylinders (A 5.33) Wheel excavator 150W with blade on steering axle, 2 outriggers on rigid axle and 2 lifting cylinders (A 5.35) SDB = support and dozer blade Boom: Monoblock boom with stick cylinder 4.32 m (C 6.3M) Adjustable boom consisting of the base arm 1.87 m (C 6.41) with adjustable cylinder and boom 3.10 m (C 6.46) with stick cylinder Sticks: Stick 2.15 m (D 6.2) Stick 2.65 m (D 6.3) Bucket tipping cylinder: Bucket tipping cylinder with bucket linkage (F 6.1) Standard equipment Engine: Automatic idle Diesel pre-filter Engine monitoring Cold start assistance Hydraulics: Proportional grab/grab rotating function Accumulator for emergency lowering of the arm system Pipe break protection valves for lifting and articulated cylinders Max. load-limit control Cylinder end-position damping Cab: Air conditioning with Climatronic Preparation for radio installation with mute function Slim steering column, height and tilt adjust able Ready for electric cooling box Different options for storage, compartment for documents Seat adjustable separately from console Rear view security camera Heat-absorbing glass, tinted windows Automotive drive and cruise control Operating data display screen Bottle holder Equipment: Joint bearings in stick and bucket cylinders Combined lubricating points for swing bea ring and arm equipment Undercarriage: Power-shift transmission Wet disc brakes Tool box in the undercarriage ADDITIONAL EQUIPMENT Engine: Refueling pump Engine speed adjustment via potentiometer Auxiliary heating Hydraulics: Hydraulic kit, to operate front and rear supports separately Hydraulic kit, to operate supports per axle separately Biodegradable oil Equipment: Automatically controlled and monitored electric central lubrication system for uppercarriage and arm equipment Cab: Cab protection guard Beacon light Heated driver s seat Radio CD/MP3, front AUX in, USB Joystick steering Electric cooling box LED working-lights Cab elevation GPS/GSM telemetric system for monitoring of operating data, consumption, position Proportional control of supports by slide in joystick Undercarriage: Wide axles (overall width 2750 mm) Wide dozer blade (overall width 2750 mm) High-speed option 37 km/h Gear protection Wheel cover Other special equipment: See price list ATTACHMENTS (SELECTION) Capacity SAE Cutting width Bucket F m mm Bucket F m mm Bucket F m mm Bucket F m mm 3

4 WORK AREAS 150W Work Areas Monoblock boom 4.32 m (C6.3M) B A D E C m G F STICK LENGTHS 2.15 m (D6.2) 2.65 m (D6.3) A Max. cut-in height 8.10 meters 8.35 meters B Max. pouring height 5.35 meters 5.65 meters C Max. trench depth 5.20 meters 5.70 meters D Max. vertical tapping depth 3.00 meters 3.55 meters E Max. trench depth with 2.44-metre-wide base 4.95 meters 5.50 meters F Max. reach 8.20 meters 8.70 meters G Max. reach in the standing plane 8.05 meters 8.50 meters Max. bucket digging force 130 kn 130 kn Max. stick digging force 82 kn 72 kn Unit is equipped with monoblock boom 4.32 m (C6.3M). 4 WheelED Excavator 150W

5 Lifting Capacities Monoblock boom 4.32 m (C6.3M) LIFTING CAPACITIES 150W Lifting Capacities Monoblock boom 4.32 m (C6.3 M) with Stick 2.15 m (D6.2). Max. Reach 8.20 m 2.5 m 3.0 m 3.5 m 4.0 m 4.5 m 5.0 m 5.5 m 6.0 m 6.5 m SDB rear, supported 4195 SDB front, raised 4195 SDB supported SDB raised 3966* 3505* +4.0 m FRONT -2.0 m FRONT m FRONT SDB rear, supported SDB front, raised SDB supported * 3447* SDB raised 3978* 3465* 3046* SDB rear, supported SDB front, raised SDB supported * 4396* 3841* 3394* 3022* SDB raised 6366* 5271* 4472* 3864* 3384* 2994* 2667* SDB rear, supported SDB front, raised * SDB supported 6997* 5797* 4926* 4265* 3746* 3327* 2978* SDB raised 6016* 5030* 4300* 3738* 3292* 2928* 2624* SDB rear, supported SDB front, raised * 4235* SDB supported 6760* 5610* 4781* 4154* 3662* 3264* 2936* SDB raised 5792* 4850* 4160* 3631* 3210* 2867* 2583* SDB rear, supported SDB front, raised * 4697* 4143 SDB supported * 5510* 4694* 4082* 3605* 3224* 2918* SDB raised 7129* 5703* 4755* 4076* 3561* 3155* 2829* 2565* SDB rear, supported SDB front, raised SDB supported * 6672* 5499* 4676* 4066* 3597* 3230* SDB raised * 5708* 4744* 4058* 3545* 3147* 2834* SDB rear, supported SDB front, raised SDB supported * 6735* 5545* 4714* 4104* 3649* SDB raised 9720* 7247* 5768* 4789* 4095* 3582* 3197* SDB rear, supported SDB front, raised SDB supported SDB raised * 4904* 4215* Lifting Capacities Monoblock boom 4.32 m (C6.3M) with Stick 2.65 m (D6.3). Max. Reach 8.70 m 2.5 m 3.0 m 3.5 m 4.0 m 4.5 m 5.0 m 5.5 m 6.0 m 6.5 m 7.0 m SDB rear, supported SDB front, raised SDB supported SDB raised 3520* 3116* m FRONT -2.0 m FRONT m FRONT SDB rear, supported SDB front, raised SDB supported * 3088* SDB raised 3508* 3084* 2730* SDB rear, supported SDB front, raised SDB supported 4444* 3875* 3420* 3044* 2725* SDB raised 3909* 3416* 3018* 2687* 2405* SDB rear, supported SDB front, raised * SDB supported 7118* 5871* 4974* 4296* 3765* 3338* 2985* 2688* SDB raised 6129* 5099* 4344* 3766* 3309* 2938* 2630* 2368* SDB rear, supported SDB front, raised * 3810* SDB supported 6804* 5638* 4798* 4162* 3663* 3260* 2928* 2648* SDB raised 5831* 4875* 4174* 3636* 3209* 2862* 2574* 2330* SDB rear, supported SDB front, raised * 4676* 4184* 2926 SDB supported * 5493* 4678* 4065* 3586* 3201* 2884* 2627* SDB raised 7062* 5673* 4737* 4059* 3542* 3135* 2804* 2531* 2308* SDB rear, supported SDB front, raised * 4651* 4178* SDB supported 8363* 6592* 5437* 4624* 4018* 3550* 3178* 2879* SDB raised 7050* 5630* 4683* 4006* 3497* 3100* 2782* 2526* SDB rear, supported SDB front, raised SDB supported * 6626* 5456* 4636* 4030* 3566* 3207* SDB raised 9523* 7109* 5662* 4702* 4018* 3508* 3115* 2810* SDB rear, supported SDB front, raised SDB supported * 5540* 4711* 4108* SDB raised * 5759* 4781* 4091* 3584* All values in kilogrammes (kg) were determined acc. ISO and include a stability factor of 33% and 87% of the hydraulic lifting capacity. These values are applicable at the top of the arm with optimum positioning of the corresponding arm system and with power boost switched on. *Value limited due to excavator stability. 5

6 WORK AREAS 150W Work Areas Adjustable Boom, Base arm 1.87 m (C6.41) and Boom 3.10 m (C6.46) B A D E C m G F STICK LENGTHS 2.15 m (D6.2) 2.65 m (D6.3) A Max. cut-in height 9.70 meters meters B Max. pouring height 6.95 meters 7.35 meters C Max. trench depth 5.10 meters 5.60 meters D Max. vertical tapping depth 3.80 meters 4.30 meters E Max. trench depth with 2.44-metre-wide base 5.00 meters 5.50 meters F Max. reach 8.70 meters 9.20 meters G Max. reach in the standing plane 8.55 meters 9.05 meters Max. bucket digging force 130 kn 130 kn Max. stick digging force 82 kn 72 kn Unit is equipped with standard adjustable boom: base arm 1.87 m (C6.41) and boom 3.10 m (C6.46). 6 WheelED Excavator 150W

7 LIFTING CAPACITIES 150W Lifting Capacities Adjustable Boom, Base arm 1.87 m (C6.41) and Boom 3.10 m (C6.46) Lifting Capacities Adjustable Boom: Base arm 1.87 m (C6.41) and Boom 3.10 m (C6.46) with Stick 2.15 m (D6.2). Max. Reach 8.70 m 2.5 m 3.0 m 3.5 m 4.0 m 4.5 m 5.0 m 5.5 m 6.0 m 6.5 m 7.0 m +6.0 m FRONT SDB rear, supported SDB front, raised SDB supported SDB raised * 4558* 4065* 3946* 3484* m FRONT m FRONT SDB rear, supported SDB front, raised SDB supported * * 2998* SDB raised * * 3063* 2641* SDB rear, supported SDB front, raised SDB supported * 4470* 3931* 3494* 3036* SDB raised * 5397* 4601* 3999* 3524* 3091* 2678* SDB rear, supported SDB front, raised * SDB supported * 5074* 4413* 3894* 3482* 3029* 2655* SDB raised * 4526* 3951* 3499* 3077* 2672* 2335* SDB rear, supported SDB front, raised * 4222* 3793* SDB supported * 5877* 5022* 4377* 3882* 3429* 2990* 2632* SDB raised * 5227* 4486* 3924* 3502* 3025* 2633* 2312* SDB rear, supported SDB front, raised * 4673* 4233* 3751* SDB supported * 7059* 5866* 5017* 4388* 3869* 3346* 2930* 2589* SDB raised 10231* 7755* 6243* 5221* 4490* 3911* 3408* 2945* 2575* 2271* SDB rear, supported SDB front, raised * 3720* SDB supported 12030* 8951* 7130* 5900* 5004* 4323* 3738* 3252* 2863* 2560* SDB raised 10118* 7662* 6154* 5124* 4370* 3790* 3281* 2853* 2509* 2242* SDB rear, supported SDB front, raised * 4649* 3987 SDB supported 11979* 8827* 6981* 5762* 4892* 4184* 3614* 3172* 2825* SDB raised 9925* 7481* 5996* 4992* 4263* 3656* 3160* 2775* 2472* SDB rear, supported SDB front, raised SDB supported 11923* 8761* 6919* 5675* 4753* 4073* 3552* 3151* SDB raised 9874* 7419* 5937* 4909* 4130* 3549* 3100* 2754* Lifting Capacities Adjustable Boom: Base arm 1.87 m (C6.41) and Boom 3.10 m (C6.46) with Stick 2.65 m (D6.3). Max. Reach 9.20 m 2.5 m 3.0 m 3.5 m 4.0 m 4.5 m 5.0 m 5.5 m 6.0 m 6.5 m 7.0 m 7.5 m +6.0 m FRONT SDB rear, supported SDB front, raised SDB supported * 3505* SDB raised * 3580* 3103* m FRONT m FRONT SDB rear, supported SDB front, raised SDB supported * 3522* 3102* 2704* SDB raised * 3565* 3154* 2745* 2383* SDB rear, supported SDB front, raised SDB supported * 3933* 3496* 3122* 2735* SDB raised * 4009* 3526* 3137* 2766* 2414* SDB rear, supported SDB front, raised * 3446* SDB supported * 5969* 5077* 4403* 3882* 3465* 3109* 2728* 2405* SDB raised * * 3941* 3483* 3114* 2754* 2407* 2113* SDB rear, supported SDB front, raised * * SDB supported * 5853* * 3846* 3447* 3065* 2693* 2383* SDB raised * * * 2711* 2372* 2091* SDB rear, supported SDB front, raised * 4178* 3795* 3387* SDB supported * 6995* 5806* 4962* 4331* 3844* 3432* 2997* 2639* 2345* SDB raised * 6176* * 3885* 3459* 3034* 2639* 2318* 2055* SDB rear, supported SDB front, raised * 4208* 3734* 3358* SDB supported * * 4992* 4353* 3810* 3319* 2910* 2576* 2314* SDB raised 10187* * 5170* 4405* 3818* 3350* 2917* 2554* 2257* 2024* SDB rear, supported SDB front, raised * 4132* 3696* SDB supported 11997* 8847* 6997* 5774* 4899* 4241* 3676* 3205* 2831* 2535* SDB raised 9938* 7496* 6009* 5001* 4268* 3709* 3219* 2806* 2477* 2216* SDB rear, supported SDB front, raised * SDB supported 11859* 8718* 6884* 5678* 4812* 4098* 3554* 3134* 2798* SDB raised 9812* 7376* 5901* 4910* 4184* 3571* 3101* 2736* 2444* All values in kilogrammes (kg) were determined acc. ISO and include a stability factor of 33% and 87% of the hydraulic lifting capacity. These values are applicable at the top of the arm with optimum positioning of the corresponding arm system and with power boost switched on. *Value limited due to excavator stability. 7

8 WORK AREAS 150W Work Areas Adjustable Boom, Base arm 1.87 m (C6.41) and Boom 3.62 m (C6.461) B A D E C m G F STICK LENGTHS 2.15 m (D6.2) 2.65 m (D6.3) A Max. cut-in height meters meters B Max. pouring height 6.45 meters 7.95 meters C Max. trench depth 5.35 meters 5.96 meters D Max. vertical tapping depth 4.10 meters 4.70 meters E Max. trench depth with 2.44-metre-wide base 5.20 meters 5.80 meters F Max. reach 8.25 meters 9.75 meters G Max. reach in the standing plane 8.10 meters 9.60 meters Max. bucket digging force 130 kn 130 kn Max. stick digging force 82 kn 72 kn Unit is equipped with standard adjustable boom: base arm 1.87 m (C6.41) and boom 3.62 m (C6.461). 8 WheelED Excavator 150W

9 LIFTING CAPACITIES 150W Lifting Capacities Adjustable Boom, Base arm 1.87 m (C6.41) and Boom 3.62 m (C6.461) Lifting capacites Adjustable boom: Base arm 1.87 m (C6.41) and boom 3.10 m (C6.461) with stick 2.15 m (D6.2). Max reach 8.70 m 2.5 m 3.0 m 3.5 m 4.0 m 4.5 m 5.0 m 5.5 m 6.0 m 6.5 m 7.0 m 7.5 m +6.0 m FRONT SDB rear, supported SDB front, raised SDB supported * 3445* 2959* SDB raised * 3503* 3038* 2598* m FRONT m FRONT SDB rear, supported SDB front, raised SDB supported * 3885* 3440* 3039* 2632* SDB raised * 4581* 3958* 3473* 3078* 2677* 2308* SDB rear, supported SDB front, raised * SDB supported * 5008* 4342* 3823* 3405* 3059* 2664* 2323* SDB raised * 5233* 4463* 3886* 3424* 3053* 2700* 2340* 2031* SDB rear, supported SDB front, raised * SDB supported * 4267* 3767* * 2657* 2328* SDB raised * 5087* * 3378* 3029* 2688* 2333* 2035* SDB rear, supported SDB front, raised * * SDB supported * * 4220* * 3003* 2620* 2304* SDB raised * 5019* 4312* 3776* 3357* 3028* 2642* 2297* 2012* SDB rear, supported SDB front, raised * 4065* * SDB supported * 5644* 4829* 4214* 3749* 3369* 2926* 2563* 2264* SDB raised * 6000* 5017* 4309* 3779* 3353* 2963* 2566* 2241* 1973* SDB rear, supported SDB front, raised * * 3282* SDB supported * 5702* 4872* 4223* 3709* 3250* 2833* 2495* 2230* SDB raised * 5924* 4951* 4237* 3688* 3247* 2846* 2476* 2175* 1940* SDB rear, supported SDB front, raised * 4054* 3616* SDB supported 11588* 8542* 6763* 5591* 4756* 4127* 3600* 3124* 2747* 2451* SDB raised 9553* 7202* 5780* 4821* 4126* 3595* 3142* 2724* 2391* 2132* SDB rear, supported SDB front, raised SDB supported 11565* 8493* 6705* 5535* 4710* 4017* 3472* 3046* 2713* SDB raised 9532* 7157* 5725* 4767* 4081* 3488* 3017* 2648* 2358* Lifting capacites Adjustable boom: Base arm 1.87 m (C6.41) and boom 3.10 m (C6.461) with stick 2.65 m (D6.3). Max reach 9.20 m 2.5 m 3.0 m 3.5 m 4.0 m 4.5 m 5.0 m 5.5 m 6.0 m 6.5 m 7.0 m 7.5 m 8.0 m SDB rear, supported SDB front, raised SDB supported * 3455* 3082* 2739* 2385* SDB raised * 3493* 3092* 2760* 2413* 2091* +4.0 m FRONT -2.0 m FRONT m FRONT SDB rear, supported SDB front, raised SDB supported * 4361* 3832* 3404* 3052* 2758* 2412* 2110* SDB raised * 5281* 4491* 3899* * * 2117* 1842* SDB rear, supported SDB front, raised * 3074* SDB supported * 4903* 4259* 3759* 3351* 3020* 2746* 2405* 2114* SDB raised * 5098* 4370* 3809* * 2713* 2421* 2110* 1845* SDB rear, supported SDB front, raised * 3365* 3052* SDB supported * 5618* 4804* 4190* 3704* 3317* 3005* 2704* 2371* 2092* SDB raised * 4991* 4282* * 2980* 2709* 2378* 2077* 1824* SDB rear, supported SDB front, raised * 4020* 3660* 3372* 3015* SDB supported * 5575* 4770* * 3315* 3021* 2636* 2318* 2055* SDB raised * 5924* 4950* 4252* 3721* 3311* 2990* 2658* 2312* 2025* 1787* SDB rear, supported SDB front, raised * * 2981* SDB supported * 6759* * 4185* 3724* 3305* 2908* 2551* 2258* 2022* SDB raised * * 4268* 3710* 3265* 2899* 2548* 2229* 1966* 1755* SDB rear, supported SDB front, raised * 3639* 3264* SDB supported 11573* 8543* 6769* 5596* 4758* 4127* 3631* 3198* 2795* 2469* 2210* SDB raised 9535* 7201* 5783* 4823* 4126* 3593* 3170* 2795* 2437* 2148* 1919* SDB rear, supported SDB front, raised * 4019* 3444 SDB supported 11479* 8438* 6665* 5501* 4676* 4060* 3522* 3069* 2710* 2423* SDB raised 9448* 7102* 5684* 4732* 4047* 3529* 3065* 2669* 2355* 2103* SDB rear, supported SDB front, raised SDB supported 11520* 8448* 6663* 5500* 4614* 3936* 3415* 3012* 2693* SDB raised 9486* 7112* 5683* 4731* 3986* 3409* 2961* 2613* 2337* All values in kilogrammes (kg) were determined acc. ISO and include a stability factor of 33% and 87% of the hydraulic lifting capacity. These values are applicable at the top of the arm with optimum positioning of the corresponding arm system and with power boost switched on. *Value limited due to excavator stability. 9

10 DIMENSIONS 150W Dimensions C M A K B J E F D H L A TRANSPORT HEIGHT (with bucket) Adjustable boom* with stick 2.15 m m C TAIL SWING RADIUS m Adjustable boom* with stick 2.65 m m D CLEARANCE UNDER COUNTERWEIGHT m Monoblock boom 4.32 m with stick 2.15 m m E WHEEL BASE m Monoblock boom 4.32 m with stick 2.65 m m F UNDERCARRIAGE LENGTH m B TRANSPORT LENGTH H DOZER BLADE WIDTH m Adjustable boom* with stick 2.15 m m J GROUND CLEARANCE m Adjustable boom* with stick 2.65 m m K OVERALL HEIGHT OF CAB m Monoblock boom 4.32 m with stick 2.15 m m L OUTRIGGERS WIDTH (extended) m Monoblock boom 4.32 m with stick 2.65 m m M OVERALL WIDTH OF SUPERSTRUCTURE m * Adjustable boom: Base arm 1.87 m (C6.41) and boom 3.10 m (C6.46) 4.00 m 0.89 m 1.07 m 0.95m 0.74 m 0.93 m 0.51 m 0.34 m 0.47 m 3.50 m 2.60 m 4.64 m Road travel setup Undercarriage with 4x outrigger support Undercarriage with support combination (Support dozer blade plus 2x outriggers) 4.63 m Wheeled Excavator 150W 150W-EN (1) Effective date: 04/2016. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings in this document are for illustrative purposes only. Refer to the appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Atlas makes no other warranty, express or implied. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product and sale and Atlas makes no other warranty, express or implied. Products and services listed may be trademarks, service marks or trade-names of Atlas GmbH and/or its subsidiaries. All rights are reserved. Atlas is a registered trademark of Atlas GmbH. Copyright 2010 Atlas GmbH. Ref. no ATLAS GmbH EXCAVATORS Atlasstrasse Ganderkesee, Germany T: +49 (0) F: +49 (0) info@atlasgmbh.com