Cast Stainless Steel Butt-Weld Outlet Connection Data
|
|
|
- Gilbert Byron Moore
- 6 years ago
- Views:
Transcription
1 180 Stainless Steel Cast Stainless Steel utt-weld Outlet Connection Data Josam cast stainless steel drains and cleanouts are regularly furnished with Schedule 40S butt-weld outlet connections. utt-weld outlet connections can also be furnished in Schedule 10S and 80S as specified. SCHEDULE DI. Schedule 10S Pipe DI. Schedule 40 Pipe / /2 4 6 DI. Schedule 80 Pipe / /2 Dimension 10S S S
2 Stainless Steel 181 SPECIFICTION: JOSM SS-T TYPE 316 CST STINLESS STEEL FLOOR DRIN, TWO-PIECE ODY WITH DOULE DRINGE FLNGE, WEJLOC INVERTILE FLSHING COLLR, WEEPHOLES, OTTOM THREDED OUTLET ND DJUSTLE ROUND SUPER-FLO STRINER. SLOT WIDTH 1/ DJUSTLE SUPER-FLO STRINER STINER X Y FREE RE (SQ. IN.) -5-SS 5 3/ 2-1/8" SS 6 1-1/ 2-3/8" SS 7 1-1/8" 2-7/8" SS 8 1-5/8" 2-5/8" VP 9 1/ X MIN Y MX 3 3/ SECURED GRTE, VNDL-PROOF SCREWS -49 3/ PRIMER TP -50 1/ PRIMER TP -80 PERFORTED STINLESS STEEL SKET DTE OF LST CHNGE: 5/28/14 DIMENSIONS RE SUJECT TO MNUFCTURERS TOLERNCES ND CHNGE WITHOUT NOTICE. WE CN SSUME NO RESPONSIILITY FOR USE OF SUPERSEDED OR VOID DT. STINLESS STEEL DJUSTLE FLOOR DRIN WEJLOC INVERTLE FLSHING COLLR 1 1/8" IPS PRIMER TPPING (-49 & -50) JOSM COMPNY MICHIGN CITY, INDIN SS-T FORMERLY /8" SPECIFICTION: JOSM E-SS STINLESS STEEL FLOOR DRIN, TWO-PIECE ODY WITH DOULE DRINGE FLNGE ND 1/ PRIMER R TP, WEJLOC INVERTILE FLSHING COLLR, WEEPHOLES, OTTOM OUTLET ND STINLESS STEEL DJUSTLE ROUND STRINER WITH TRCTOR GRTE. SLOT WIDTH 1/ (TYP) 9 1/ WEJLOC INVERTILE FLSHING COLLR 3 3/ STRINER X Y FREE RE -6E 6 2-1/4 3-1/ E 7 1-7/8 3-1/ /8" FLOOR DRIN DJUSTLE FLOOR DRIN E-SS DJUSTLE TRCTOR STRINER X -SS STINLESS STEEL TOP (6E OR 7E ONLY) -80 PERFORTED STINLESS STEEL SKET -21 DIMETER FUNNEL -J CKWTER VLVE -22 6" DIMETER FUNNEL -VP SECURED GRTE, VNDL-PROOF SCREWS -T THREDED OUTLET -50 1/ PRIMER TP DTE OF LST CHNGE: 04/27/15 DIMENSIONS RE SUJECT TO MNUFCTURERS JOSM COMPNY TOLERNCES ND CHNGE WITHOUT NOTICE. WE CN SSUME NO RESPONSIILITY FOR USE OF SUPERSEDED OR VOID DT. MICHIGN CITY, INDIN X MIN Y MX IPS PRIMER TP 1/ WITH PLUG (OPT.)
3 182 Stainless Steel SPECIFICTION: JOSM S-SS-T TYPE 316 CST STINLESS STEEL FLOOR DRIN, TWO-PIECE ODY WITH DOULE DRINGE FLNGE, WEJLOC INVERTLE FLSHING COLLR, WEEPHOLES, OTTOM THREDED OUTLET ND DJUSTLE SQURE SUPER-FLO STRINER. SLOT WIDTH 1/ DJUSTLE SUPER-FLO STRINER -VP / X MIN Y MX 3 3/ 3/ PRIMER TP 1/ PRIMER TP STINER X Y FREE RE (SQ. IN.) -5S-SS 5 7/8" 1-7/8" 9.1-6S-SS 6 7/8" 2-1/ S-SS 8 1-1/ 2-1/ 24.5 DTE OF LST CHNGE: SECURED GRTE, VNDL-PROOF SCREWS PERFORTED STINLESS STEEL SKET 5/28/14 DIMENSIONS RE SUJECT TO MNUFCTURERS TOLERNCES ND CHNGE WITHOUT NOTICE. WE CN SSUME NO RESPONSIILITY FOR USE OF SUPERSEDED OR VOID DT. STINLESS STEEL DJUSTLE FLOOR DRIN WEJLOC INVERTLE FLSHING COLLR 1 1/8" IPS PRIMER TPPING (-49 & -50) JOSM COMPNY S-SS-T 2 7/8" SPECIFICTION: JOSM SS TYPE 316L CST STINLESS STEEL FLOOR DRIN, DOULE DRINGE FLNGE, WEEPHOLES, ROUND TOP, HEVY-DUTY LOOSE- SET NTI-TILTING SUPER-FLO GRTE WITH PERIMETER DRINGE SLOTS, OTTOM OUTLET, UTT WELD FOR SCHEDULE 40. SLOT WIDTH 15/32 FLOOR DRIN 9 ROUND TOP, STINLESS STEEL SS FORMERLY E LEVELEZE DJUSTLE EXTENSION x 3 OVL FUNNEL (SME METERIL S GRTE) -81 SLOTTED STINLESS STEEL UCKET x 3 OVL FUNNEL (TYPE 316 STINLESS STEEL) -25 TYPE 304 STINLESS STEEL RECESSED CLOSURE PLUG -8 SOLID COVER (SPECIFY MTERIL) -26 MOLDED S RECESSED CLOSURE PLUG -9 STINLESS STEEL MESH ON UNDERSIDE OF GRTE -34 T HNDLE FOR RECESSED PLUG ROUND FUNNEL (SME METERIL S GRTE) -61 FLSHING CLMP DEVICE ROUND FUNNEL (TYPE 316 STINLESS STEEL) ROUND FUNNEL (SME METERIL S GRTE) -69 SCHEDULE 10 S UTT WELD ROUND FUNNEL (TYPE 316 STINLESS STEEL) SEPRTE SUMITL FOR THIS OPTION VILLE DRWING No. 10/13/14 : K JOSM COMPNY MICHIGN CITY, INDIN 2 1-7/ / /2
4 Stainless Steel 183 SPECIFICTION: JOSM SS-E TYPE 316 CST STINLESS STEEL LEVELEZE FLOOR DRIN, DOULE DRINGE FLNGE, WEEPHOLES, ROUND TOP, DJUSTLE COLLR WITH ROLLED THREDS ND HEVY-DUTY LOOSE-SET NTI-TILTING SUPER-FLO GRTE WITH PERIMETER DRINGE SLOTS, OTTOM OUTLET, UTT WELD FOR SCHEDULE 40. GRTE FREE RE: 26.5 IN 2 STD. STINLESS STEEL SLOT WIDTH: 7/16" 2 1/ DTE OF LST CHNGE: 1 1/ 2 3/8" MIN 3 1/ MX DD 1/ WHEN FURNISHED WITH NIKLOY (-1) X -E LEVELEZE DJUSTLE EXTENSION DIMENSIONS RE SUJECT TO MNUFCTURERS TOLERNCES ND CHNGE WITHOUT NOTICE. WE CN SSUME NO RESPONSIILITY FOR USE OF SUPERSEDED OR VOID DT. UTT WELD -81 SHLLOW STINLESS STEEL SEDIMENT UCKET -8 SOLID COVER -9 STINLESS STEEL MESH ON UNDERSIDE OF GRTE -21 ROUND FUNNEL -22 6" ROUND FUNNEL SEPRTE SUMITTL FOR THIS OPTION VILLE 10/13/14 9" 8 1/ JOSM COMPNY MICHIGN CITY, INDIN FLOOR DRIN 9" ROUND TOP, STINLESS STEEL SS-E FORMERLY / DETIL 1-7/8" 2-1/8" FLSHING CLMP DEVICE (-61) " x OVL FUNNEL -25 STINLESS STEEL RECESSED CLOSURE PLUG -26 MOLDED S RECESSED CLOSURE PLUG -34 "T" HNDLE FOR RECESSED PLUG -61 FLSHING CLMP DEVICE -69 SCHEDULE 10 S UTT WELD SPECIFICTION: JOSM SS-E-81 TYPE 316 CST STINLESS STEEL LEVELEZE FLOOR DRIN, DOULE DRINGE FLNGE, WEEPHOLES, DJUSTLE COLLR WITH ROLLED THREDS, ROUND TOP, LOOSE- SET NTI-TILTING SUPER-FLO GRTE WITH PERIMETER DRINGE SLOTS, SHLLOW SEDIMENT UCKET, OTTOM OUTLET, UTT WELD FOR SCHEDULE GRTE FREE RE: 21.8 IN STD. STINLESS STEEL SLOT WIDTH: 15/3 2 3/8" MIN 3 1/ MX 2 1/ DD 1/ WHEN FURNISHED WITH NIKLOY (-1) X -E LEVELEZE DJUSTLE EXTENSION X -81 SHLLOW STINLESS STEEL SEDIMENT UCKET -8 SOLID COVER -9 STINLESS STEEL MESH ON UNDERSIDE OF GRTE -21 ROUND FUNNEL -22 6" ROUND FUNNEL DTE OF LST CHNGE: 1 1/ 1 1/ 10/13/14 DIMENSIONS RE SUJECT TO MNUFCTURERS TOLERNCES ND CHNGE WITHOUT NOTICE. WE CN SSUME NO RESPONSIILITY FOR USE OF SUPERSEDED OR VOID DT. UTT WELD 9" 8 1/ JOSM COMPNY MICHIGN CITY, INDIN FLOOR DRIN 9" ROUND TOP, STINLESS STEEL W/ DJ. EXTENSION ND UCKET SS-E-81 FORMERLY / DETIL 1-7/8" 2-1/8" FLSHING CLMP DEVICE (-61) " x OVL FUNNEL -25 STINLESS STEEL RECESSED CLOSURE PLUG -26 MOLDED S RECESSED CLOSURE PLUG -34 "T" HNDLE FOR RECESSED PLUG -61 FLSHING CLMP DEVICE -69 SCHEDULE 10 S UTT WELD
5 184 Stainless Steel SPECIFICTION: JOSM SS TYPE 316 CST STINLESS STEEL FLOOR DRIN, DOULE DRINGE FLNGE, WEEPHOLES, ROUND TOP, LOOSE-SET NTI-TILTING GRTE, OTTOM OUTLET, UTT WELD FOR SCHEDULE 40. HEVY DUTY LOD RTING. GRTE FREE RE: 29.4 IN 2 SLOT WIDTH: 1/ 16 11/16" 6" 1 3/8" 3/ -8 SOLID COVER UTT WELD -9 STINLESS STEEL MESH ON UNDERSIDE OF GRTE -22 6" ROUND FUNNEL -25 STINLESS STEEL RECESSED CLOSURE PLUG DTE OF LST CHNGE: 11/05/14 DIMENSIONS RE SUJECT TO MNUFCTURERS TOLERNCES ND CHNGE WITHOUT NOTICE. WE CN SSUME NO RESPONSIILITY FOR USE OF SUPERSEDED OR VOID DT. 12 1/16" 10 3/ FLOOR DRIN 1 ROUND TOP, STINLESS STEEL DETIL SS MOLDED S RECESSED CLOSURE PLUG -34 "T" HNDLE FOR RECESSED PLUG -61 FLSHING CLMP DEVICE JOSM COMPNY MICHIGN CITY, INDIN FORMERLY FLSHING CLMP DEVICE (-61) 2-1/8" 2-1/ 6" 2-5/8" 7/8" -69 SCHEDULE 10 S UTT WELD SPECIFICTION: JOSM E-SS TYPE 304 CST STINLESS STEEL LEVELEZE FLOOR DRIN WITH DOULE DRINGE FLNGE, WEEPHOLES, ROUND TOP DJUSTLE COLLR WITH ROLLED THRED ND LOOSE SET NTI-TILTING SUPER-FLO GRTE WITH PERIMETER DRINGE SLOTS, OTTOM OUTLET, UTT WELD FOR SCHEDULE " UTT WELD DTE OF LST CHNGE: 04/27/15 DIMENSIONS RE SUJECT TO MNUFCTURERS TOLERNCES ND CHNGE WITHOUT NOTICE. WE CN SSUME NO RESPONSIILITY FOR USE OF SUPERSEDED OR VOID DT. 1/ 37.5 ± /16" LEVELEZE FLOOR DRIN STINLESS STEEL 3 MIN 4 1/8 MX 1 7/16" 2 1/ E-SS GRTE FREE RE: 42.2 SQ. IN. TYPE "" DIM E-SS 1 7/ E-SS E-SS 2 1/8 JOSM COMPNY MICHIGN CITY, INDIN
6 Stainless Steel 185 SPECIFICTION: JOSM SS COTED CST IRON KLEENTRON II LEVELEZE FLOOR CLENOUT, INTERNL S CLENOUT PLUG, DJUSTLE CST IRON HOUSING WITH MEDIUM-DUTY SCORITED SECURED ROUND STINLESS STEEL COVER. X-MIN Y-MX DJUSTLE CST IRON USHING THREDED S PLUG OPTIONL (-41) CLMP RING OPTIONL (-F) FLNGE CLENOUT ROUND STINLESS TOP FLNGE IS STNDRD ON -X ND 6" S SS X -SS STINLESS STEEL TOP -F FLNGE ONLY -14 CRPET CLENOUT MRKER -WF WIDE FLNGE -VP SECURED COVER, VNDL-PROOF SCREWS -CFC CRPET CLENOUT FLNGE COVER -22 TPER THRED RONZE PLUG -X INSIDE CULK OUTLET -31 GLVNIZED CST IRON PRTS -Y HU OUTLET W/ GSKET (,& S ONLY) -41 CLMP RING ND FLNGE -Z NO-HU OUTLET DTE OF LST CHNGE: 6/19/2014 DIMENSIONS RE SUJECT TO MNUFCTURERS TOLERNCES ND CHNGE WITHOUT NOTICE. WE CN SSUME NO RESPONSIILITY FOR USE OF SUPERSEDED OR VOID DT. C C D X Y 2 5-1/8 3-3/4 7-1/2 5-9/16 2-1/8 3-5/ /8 3-3/4 7-1/2 5-9/16 2-1/8 3-5/ /8 3-3/4 7-1/2 5-9/16 2-1/8 3-5/8 4-X 6-5/8 4-1/4 9-3/ /16 5-Z 5-1/8 3-3/4 7-1/2 5-9/16 2-1/8 3-5/8 6-Z 6-5/8 4-1/4 9-3/ /16 SPECIFICTION: JOSM SS TYPE 316 CST STINLESS STEEL ROUND FLUSH CLENOUT WITH FLNGED RING ND SCORITED SPNNER TYPE FLNGED SCREW PLUG ND OTTOM OUTLET WITH UTT WELD FOR SCHEDULE 40. D 04/27/10 STINLESS STEEL FLOOR CLENOUT SPNNER TYPE SS C D 2-7/8 3-3/4 1-1/ /8 1-1/2 OPTIONS: /8-45 SPNNER WRENCH 6" 7-1/4 8-3/8 1-5/8-69 SCHED 10S UTT WELD DTE OF LST CHNGE: DIMENSIONS RE SUJECT TO MNUFCTURERS TOLERNCES ND CHNGE WITHOUT NOTICE. WE CN SSUME NO RESPONSIILITY FOR USE OF SUPERSEDED OR VOID DT. C 1/ UTT WELD JOSM COMPNY MICHIGN CITY, INDIN
Aluminium Floor Outlets - Trapped Outlets
Aluminium Floor Outlets - Trpped Outlets Verticl Trpped Outlet Components Drin Body Dimensions 260 Grte* Funnel Sel Trp Assemly Funnel Cup * Elevtion Throt Throt Sel DPM Clmp Ring with Weep Bung (shown
Appendix E D791 and T791 Head and Valve Holddown Assembly Details
Appendix E D nd T Hed nd Vlve Holddown Assemly Detils Hed First Stge Holddown Assemly (") Suction with Unloder Suction (Stndrd) First Stge Holddown Assemly (") Dischrge See figure A 0 CAUTION: Alwys relieve
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl
Harmer Roof Drainage The Cast Iron Range
Cst Iron Roof Outlets - Introduction Hrmer Roof Dringe The Cst Iron Rnge The high qulity Cst Iron Roof Outlet rnge, feturing medium sump nd lrge sump odies, two-wy outlets nd n extensive rnge of lodering
Appendix E Head and Valve Assembly Details All D-Style Models 351
Appendix E Hed nd Vlve Assemly Detils All D-Style Models FD Hed Vlve Holddown Assemlies Suction (spec P) 0 0 Suction (spec P) 0 0 Dischrge (ll specs) 0 WFD Hed Appendix E Hed nd Vlve Assemly Detils All
VB-7000 Series. Selection Guide. Applications. Applicable Literature. Selection Guide Contents
V-7000 Series Selection Guide T V-7000 Series 1/2 to 2 Globe Vlves with Fort M400, M800, nd M1500 ctutors pplictions T Fort M400, M800, nd M1500 series liner ctutors mount directly 1 onto 1/2 to 2 V-7xxx
Incremental encoders Solid shaft with square flange pulses per revolution
Incrementl encoders Solid shft with squre flnge EIL580 - squre flnge - OptoPulse Fetures Size mm Precise opticl sensing Output signl level TTL or HTL Squre flnge 2.5 (63.5 mm) Connection xil, rdil or tngentil
SSAB Water mains PIPES AND FITTINGS
SSAB Wter mins PIPES AND FITTINGS Pipes nd fittings mnufctured y SSAB re used primrily with wter pipeline sizes DN 400-1200. The fittings re mde of steel pressure pipes (ex works delivery) nd cn e coted
00083FAB-DC DRAWN BY DATE CHK SCALE SIZE
D0D/6 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. 0 5/4/8 SPLIT SIDE PNEL JGC TOP CP CURVED PERFORTED SINGLE HINGE DOOR SPLIT SIDE PNEL
-XC9: Adjustable Stroke Cylinder/Adjustable Retraction Type
-XC: djustle Stroke Cylinder/djustle etrction Type djustle Stroke Cylinder/djustle etrction Type The retrct stroke of the cylinder cn e djusted y the djustment olt. pplicle Series Series Description Model
DRINK,COOL DOG WATER FOUNTAIN
DRINK, COOL WTER FOUNTIN Exclusive patent-pending decorative and functional features that hydrate, cool and keep dogs safe Standard heavy duty type 304 stainless steel 10 sched. 10 main column High polished
MODEL 1200 WATER WHEEL TRANSPLANTER OPERATING MANUAL
MODEL 1200 WATER WHEEL TRANSPLANTER OPERATING MANUAL Tble Of Contents Axle, Tire... 3 Fetures... 13 Foot Rest... 4 Helpful Tips... 14 Options... 13 Prts Brekdown, Description...10-12 Prts Brekdown, Exploded
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ For ltest informtion, PDF ctlogs nd opertion mnuls Solenoid Pilot Operted Directionl
GUIDE AND GAGE COMPONENTS INDEX
GUIDE ND GGE COMPONENTS INDEX 09/16/17 PGE DTE SERIES DESCRIPTION G-1 04/22/14 Guide and Gage Components Index G-1.1 04/22/14 Guide and Gage Components Index G-2 08/12/97 G01 & G02 Self-Lube Guide lock
PIPE SUPPORTS IRANIAN PETROLEUM STANDARDS COVER SHEET B A REV. DRAWING No. DATE DATE IPS-D-AR-012 DESCRIPTION
SUPPORTS DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-0 SHT ONRETE JOISTS STEEL JOISTS WOOD JOISTS NOTE: STRUTURL STEEL EM SEE
STANDARD CONSTRUCTION DETAILS STORM DRAINAGE REVISED - MAY 2017 DEPARTMENT OF ENGINEERING
STNDRD CONSTRUCTION DETILS STORM DRINGE REVISED - MY 2017 DEPRTMENT OF ENGINEERING GENERL NOTES CONCRETE,SPHLT STREET REPIR,PIPE EDDING UTILITY SUPPORT,WTER MIN LOWERING,CONCRETE COLLR TYPE "" STORM SEWER
MNPV6 REV A DISCO 4X FINAL ASSY
NOTES 1) ITEM 2,USR, MUST HVE TWO END SCREWS REMOVED, SO THT ITEM, WHITE INSULTORS, CN E INSTLLED. 2) UNIT SHIPS WITH THE FOLLWING ECH LCK TWO WIRE STRIN RELIEFS, P/N 9--1 ECH LCK STRIN RELIEF NUTS, P/N
MISCELLANEOUS INDEX PAGE DATE SERIES DESCRIPTION
MISCELLNEOUS INDEX 08/01/11 PGE DTE SERIES DESCRIPTION M-1 08/01/11 Miscellaneous Index M-2 04/16/96 M01 Tooling all M-3 04/16/96 M02 Scrap Chute Hook and Retainer racket M-4 01/03/95 M03 Scrap Chute Chain
PREFILL AND EXHAUST VALVE PV 100 TO PV 200
PREFILL ND EHUST VLVE Ref. No. Relese 08/2006 1 Description Set type construction. llows free flow from it's port to port. Flow from port to port cn e hd y pplying pilot pressure to it's port. The decompression
Pipe Fittings & Steel Nipples
November 200 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com. Pipe Fittings & Steel Nipples U I L D I N G C O N N E C T I O N S T H T L
Series 250 Type and Type Pneumatic Control Valves Type 3251 Globe Valve
Series 250 Type 3251-1 nd Type 3251-7 Pneumtic Control Vlves Type 3251 Globe Vlve DIN version Appliction Control vlve for process engineering pplictions with high industril requirements Nominl size DN
GUARDIAN VERTICAL MOUNTING
GUARDIAN VERTICAL MOUNTING L120 GUARDIAN INDUSTRIAL & ATEX Exi VERTICAL REED LEVEL SWITCH This rnge of mgnet operted reed switches re equipped with hermeticlly seled reed contcts. The flot is fitted with
Solenoid Pilot Operated Directional Control Valve
Contct Detils efore using the product, plese check the http://www.dikinpmc.com/en/ For ltest informtion, DF ctlogs nd opertion mnuls Solenoid ilot Operted Directionl Control Vlve Fetures hese models relize
Solenoid Pilot Operated Directional Control Valve
efore using the product, plese check the guide pges t the front of this ctlog. http://www.dikinpmc.com/en/ Solenoid Pilot Operted Directionl Control Vlve Fetures hese models relize high-pressure lrge-flow-rte
152mm (6") DIA. POINT TO POINT SYSTEM PVC OR STEEL TUBE SYSTEM TYPE I AND TYPE II OVERHEAD UNITS TYPE I OVERHEAD UNIT TYPE II OVERHEAD UNIT NOTES:
2mm ") DI. POINT TO POINT SYSTEM PVC OR STEEL SYSTEM L84 CLL -800--600 TYPE I ND TYPE II OVERHED UNITS 4 6 ") ( 8 ") 6 8 ") ( -0 PLN VIEW 20 (8 28 8 ") ( 8 ") 4 ( -4") 2 (4 ( 8 ") 28 ( 8 ") THE TYPE I
Solenoid Operated Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)
Solenoid Operted Proportionl Directionl Control Vlve (with Pressure Compenstion, Multiple Vlve Series) Hydrulic circuit (Exmple) v Fetures hese stcking type control vlves show pressure compensted type
SHEET 1 OF 6
REVISIONS REV DESCRIPTION CHG.NO. PP'D DTE SENSOR WELD NECK MOUNTING FLNGE & WELD FTG. (FCTORY WELDED) VILBLE IN SME B16.5 RF & RTJ, ND EN 1092-1 RF. REFER TO TBLE 1 ON SHEET 2 OR FOR S ND DIMENSIONS NEW
INSTALLATION INSTRUCTIONS FOR CONCEALED CLOSET AND URINAL FLUSHOMETERS
Code No. 0816170 Rev. 3 (04/14) INSTLLTION INSTRUCTIONS FOR CONCELED CLOSET ND URINL FLUSHOMETERS Model 140 Model 195 Concealed Closet Flushometer 1-1/2 Exposed ack Spud MODEL 140 MODEL 154 Concealed Closet
FUEL SYSTEM & CARBURETION 3 A CARBURETOR R1 JUNE 1996 FUEL SYSTEM AND CARBURETION
FUEL SYSTEM & CARBURETION 3 A CARBURETOR 90-831996R1 JUNE 1996 FUEL SYSTEM AND CARBURETION 3A- 1 Tle Of Contents Pge Removing Cruretor..................... 3A-1 Disssemling Cruretor................. 3A-1
Air and Vacuum Sewer Valves. Stainless Steel Trim Standard. Short Air & Vacuum Sewer Series
ir and Vacuum Sewer Valves ir and Vacuum Sewer Valves Valve Function Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable
Pipe Fittings & Steel Nipples
Pipe Fittings & Steel Nipples www.anvilintl.com NOVEMER 20 For the most current product/pricing information on nvil products, please visit our website at www.anvilintl.com UILDING CONNECTIONS THT LST For
BIMETAL-POINTER-THERMOMETER
BIMETA-POINTER-THERMOMETER Chemicl version cc. EN 30 byonet cse IP 6 With or without filling Suitble for chemicl nd petrochemicl industry, food, pulp nd pper industry nd for mchine nd pprtus contruction.
ABS PIPES & FITTINGS THE INDUSTRY STANDARD FOR A WIDE RANGE OF APPLICATIONS
S PIPES & FITTINGS THE INDUSTRY STNDRD FOR WE RNGE OF PPLICTIONS VUX VERSION 2 S PIPE & FITTINGS FOR INDUSTRIL PPLICTIONS INTRODUCTION S thermoplastics are recognized as a suitable material to be used
FINGER STRIPS. and other EMI shielding products. Characteristics
BERYLLIUM COPPER CONTCT FINGER STRIPS nd other EMI shielding products ppliction Due to their outstnding mteril nd electricl chrcteristics, eryllium copper fingers of different shpes nd dimensions re used
13V399AN-DC DRAWN BY DATE CHK SCALE SIZE
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. TOP CP 2 KNOCK-OUTS FOR PDU POWER CORD PERFORTED SINGLE HINGE SPLIT DOOR SIDE PNEL IN SOME
TOP CAP KNOCK-OUTS FOR
2 THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP.. VISIT OUR ON-LINE CTLOG T WWW.PNDUIT.COM FOR LIST OF CURRENT PRTS PPLICLE FOR TOP CP
HOOK UP LAYOUT FOR HEAT GENERATION AND FUEL TANK SYSTEM
HOOK UP LYOUT FOR HET GENERTION ND FUEL TNK SYSTEM DESRIPTION IRNIN PETROLEUM STNDRDS NO REVISION PERMITTED UNLESS PPROVED Y STNDRD ORGNIZTION OVER SHEET DRWING No. IPS-D-R-018 SHT 1 "(DN0) FILL FUEL OIL
SRX IVL LANDFILL PUMP BOTTOM LOADING
REV DESCRIPTION DTE PPROVED RELESE FOR PRODUCTION 5/9/008 SWells 6 7 6 6 9 0 0 8 8 7 5 5 5 8 9 8 5 ) THE MGNET ITEM 5 IS INSTLLED INTO THE PUMP HED NORTH POLE FIRST. 9 8 7 6 DRWN SWells 5/9/008 Q 75 West
Free Machining Austenitic Ferritic + Martensitic Pure Titanium Titanium Alloys Stainless Steels Stainless Steels <950N/mm 2
& - Tps For Stinless Steels These top qulity Tps re mde in Switzerlnd, by DC-Swiss, one of the leding Tp Mnufcturers in Europe. All the Tps re mde of - (Powder Metl). This mteril hs proven to be the best
EQUIPMENT LEGS AND ACCESSORIES
EQUIPMENT LEGS ND ESSORIES 800-526-3694 1 lphabetical Index DESRIPTION PGE DESRIPTION PGE ESSORIES LUMINUM LEGS PPLINE LEGS RKETS, UNDERSHELF RKETS, QUIK ORNERS LMPS, SPRING ROSS RE FITTINGS ORNER RKETS
VALVULAS. Modelo 215V, 337 Sección VIII, Vacío De Asme Aire/Gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV'
VLVULS Modelo 215V, 337 Sección VIII, Vacío De sme ire/gas, Válvulas De Seguridad Certificadas Tarjeta Nacional ' UV' Descripciones Modelo Model 337: Tiene dispositivo para la elevación 'tirar-anillo'
Georg Fischer Waga N.V. Your mechanical connection for plastic pipes restraint - non restraint d63 - d315. Products. Plast/Joint
Georg Fischer Wg N.V. Your mechnicl connection for plstic pipes restrint - non restrint - Proucts Plst/Joint Plst/Joint >> Your mechnicl restrint connection for plstic pipes >> With the increse use of
Quality HSS (EW 9 Co 10 - cobalt 10%). Ø x l mm 16 x x x x x
Engrver's points Tool holder its Cutting-Off nd Grooving Tools 1812-1816 Engrver's Points With rough-ground profile. For use on tempered nd chrome-nickel steel. For engrving lettering, profiling for contours,
HOLDERS. Straight Heavy-Duty Ejector Holders - Swivel head. FIGURE 6-1 (Material RWMA Class 2)
SEEDORFF ME orp. 866-RES-WELD (737-9353) Straight Heavy-Duty Ejector Holders - Swivel head 3 6 7 9 10 11 12 13 1 2 4 5 8 FIGURE 6-1 (Material RWM lass 2) THE ENTERLINE HEVY DUTY EJETOR HOLDER HS EEN DESIGNED
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. DUL HINGE PERFORTED FRONT SPLIT SIDE PNEL SOLID SELED RER SPLIT SIDE PNEL VED REDY INTEGRL
Print This Page. Return To Index
PLASTI-BOND REDH2OT KNOCKOUT HUBS KNOCKOUT HUBS PRST2 PRSTG2 Knockout Hubs Specifictions Knockout Hubs Configurtions ST STG2 b c STTB STTTB d COMPLIANCES PLASTI-BOND REDH 2 OT ST style knockout hubs re
WARNING: IF THERE ARE ANY DISCREPANCIES BETWEEN THE CAD FILE AND THE DRAWING, THE DRAWING WILL TAKE PRECEDENCE. IF IN DOUBT, ASK.
28.48 DJUSTLE 5.64 19.78 DJUSTLE D 8 7 6 5 4 3 2 1 20.37 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D 51.80 48.00 9.57 C C 18.00
WATERTIGHT AIRTIGHT SPECIAL ACCESS DOORS & HATCHES, PART 1 GENERAL
SECTION 08316 WTERTIGHT IRTIGHT SPECIL CCESS DOORS & HTCHES, PRT 1 GENERL HIGHLIGHTED RES TO BE INSERTED BY SPECIFYING ENGINEER. 1.1 WORK OF THIS SECTION. THE WORK OF THIS SECTION INCLUDES PROVIDING LL
BACKFLOW PREVENTERS DUAL-CHECK BACKFLOW PREVENTER WITH ATMOSPHERIC VENT T/S-459 Certified to ASSE Standard 1012
CKFLOW PREVENTERS DUL-CHECK CKFLOW PREVENTER WITH TMOSPHERIC VENT T/S-459 Certified to SSE Standard 1012 Certified to CS Standard 64.3 Forged brass construction Threaded or sweat true union end connections
NET-ACCESS S TYPE VED READY CABINET 600mm WIDE X 1200mm DEEP FAMILY 12V343ST-DC VED TOP CAP FRONT PERFORATED SINGLE HINGE DOOR SPLIT SIDE PANEL
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. PNEL VED TOP CP PERFORTED SINGLE HINGE PNEL SOLID RER NET-CCESS S TYPE VED REDY CINET 600mm
Molded Interior Door Cambridge. Product Detail Sheets Table of Contents
Page 1 Molded Interior Door Cambridge Product Detail Sheets Table of Contents Construction Details... 3 6-8 Standard Doors 2-Panel 1-0 thru 1-8...pg. 4 2-Panel 1-10 thru 3-0...pg. 5 6-8 Bi-Fold Doors 2-Panel
Food Processing Vaportight
PROJECT DTE TYPE NOTES REV: /5/08 - High Lumen Packages, up to 9,00Lm Delivered - mbient operating temps as Low as -0C(-0F) and as High as +0C(+0F) (Temps Vary by Configuration. Verify in Energy Data Section)
INSTALLATION INSTRUCTIONS FOR CONCEALED CLOSET AND URINAL FLUSHOMETERS
Code No. 0816170 Rev. 2 (12/11) INSTLLTION INSTRUCTIONS FOR CONCELED CLOSET ND URINL FLUSHOMETERS Model 140 Model 195 Concealed Closet Flushometer 1-1/2 Exposed ack Spud MODEL 140 MODEL 154 Concealed Closet
Model 1001/1001HPS Drinking Fountain
INSTLLTION, OPERTION & MINTENNCE INSTRUCTIONS Kleppe Lane Sparks, NV 89-667 (77) 9-72 Fax (77) 9-72 E-mail: haws@hawsco.com website: www.hawsco.com Model 00/00HPS Drinking Fountain No. 20760(9) NOTE TO
Solenoid operated spool valve with soft switching NG10 ISO
WWMF1 Solenoid operted spool vlve with soft switching Flnge construction 4/3-wy with spring centred mid position 4/2-wy with spring reset Q mx = 12 l/min p mx = 35 r DESCRIION Direct operted solenoid spool
MODELS GED/GSD, DFE/DFS, DDE/DDS DIRECT DRIVE SIDEWALL PROPELLER FANS WALL HOUSING MOUNTING OPTIONS WALL HOUSING
DIRECT DRIVE SIDEWLL PROPELLER FNS WLL HOUSING MOUNTING OPTIONS WLL HOUSING: This heavy-gauge, all galvanized G-90 steel (aluminum optional) housing provides a simple solution to installing a fan and all
Brazed heat exchanger XB
Description The XB is rnge of copper rzed plte het exchngers for use in District Heting (DH) nd District Cooling (DC) pplictions, e.g. domestic hot wter production, district heting susttion to seprte the
R E V I S I O N REV. DRAWN BY ECO No DESCRIPTION DATE APPROVED BILL OF MATERIALS
NOTES: UNLESS OTHERWISE SPECIFIED. CORNERS DRWN SHRP TO E R.005 MXIMUM. 2. EXTERIOR SURFCE TEXTURE TO E EQUIVLENT TO MT-007. TEXTURE ON ENCLOSURE WILL VRY FROM TIME TO TIME S THE TOOL WERS ND IT ECOMES
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
THIS COPY IS PROVIDED ON RESTRICTED SIS ND IS NOT TO E USED IN NY WY DETRIMENTL TO THE INTERESTS OF PNDUIT CORP. SIDE PNEL 2 TOP CP PERFORTED SINGLE HINGE KNOCK-OUTS FOR PDU POWER CORD SIDE PNEL RER PERFORTED
ROBERT H. WAGER COMPANY. Installation, Operation and Maintenance Guide. Models 1500/1500-MC 1700/1750
ROERT H. WGER COMPNY Installation, Operation and Maintenance Guide Models 00/00-MC 00/0 MODELS 00/00-MC/00/0 Installation, Operation and Maintenance Guide Robert H. Wager Company, Inc. 0 Montroyal Road
BERMAD Waterworks. 400 Series. Basic Valve. ??????? WW-400 Basic Valve
Bsic Vlve??????? WW-400 Bsic Vlve The bsic Model WW-400 diphrgm ctuted hydruliclly operted vlve is t the leding edge of control vlve design. It combines simple nd relible construction with superior performnce,
Ultrasonic Flow Meter
Ultrsonic Flow Meter mesuring monitoring nlysing Mesuring rnge: up to 20 m/s Accurcy: ±0.5% of m. v. pmx PN 100, tmx 180 C Flnge DN 25...1000, DIN /ANI teel or stinless steel 1.4404 Anlogue, frequency,
Specifiable Features. Compatible with all UL 1686 listed plugs and receptacles. Type P Cable. Lockout Compliant. PowerMate Features and Benefits
PowerMte Fetures nd Benefits Type P Cle Lockout Complint Specifile Fetures Lockout Plug Sfety Insultor Dimond Clmp Split Pin Contcts Type P Cle Comptile with ll UL 686 listed plugs nd receptcles. 2 3 4
VALVE BODY ASSEMBLY ON VEHICLE REPAIR
UTOMTIC TRNSXLE (541E) VLVE ODY SSEMLY VLVE ODY SSEMLY ONVEHICLE REPIR X7 X03Q02 1. DRIN TF Using a hexagon wrench, remove the drain plug and fluid into the suitable container. 2. REMOVE OIL PN ND GSKET
S»'94**gres* 6,=4.4.0 R\OF e.. S Z * 0 10.,5251, *S .//0/1111\\\\\\ VIWINCO INC. S-SERIES IMPACT AW/FIX STACKED 04/13/12
ISIONS DTE 07/27/5 ISED INSTLLTION DETILS RL THE PRODUCT SHOWIN HEREIN IS DESIGNED ND MNUFCTURED TO COMPLY WITH REQUIREME OF THE FLORID UILDING CODE 2 WOOD FRMING ND MSONRY OPENIING TO E DESIGNED l\id
Section 12 Contents. Product Reference Numbers and Ordering Information 12.10
Section 12 Contents DESCRIPTION Product Reference Numbers and Ordering Information PGE NUMER 12.10 Technical Details Head Shapes vailable Finishes vailable Camlock Fixing Methods Explaining Keying Details
STK Series. Specifications. Stroke length (mm) High rigid cylinder Double acting/chamfered round rod end. Bore size: 20, 32, 40, 50 mm.
High rigid cylinder Doule cting/chmfered round rod end STK Series :, 32, 40, 50 mm JIS symol Doule cting CAD DATA AVAILABLE. Specifictions STK mm di. Actution Working fluid Mx. working pressure MP Doule
SECTION A-A
40.08 D 8 6 5 4 3 2 1 WRNING: IF THERE RE NY DISCREPNCIES ETWEEN THE CD FILE ND THE DRWING, THE DRWING WILL TKE PRECEDENCE. IF IN DOUT, SK. D C 51.1 48 20.25 18 C 23.68 15.12 NOTE: DRWER UNIT NOT INCLUDED,
Front Panel Service. Front panels are structural elements which need to be. Services in detail: designed individually depnding on the application.
Front Pnel Service Front pnels re structurl elements which need to be designed individully depnding on the ppliction. Prticulrly for smll quntities ( 50 units), this entils high time input in terms of
Stainless Steel Trim Standard. ir and Vacuum Sewer Valves permit a large volume of air to
ir and Vacuum Sewer Valves Valve Functio n Exhausts air as a pipeline fills, and allows air in as pipeline drains Features Include Standard and short body series available vailable in sizes thru 10 ll
POWER COMBICON Plugs and Headers PC 6/ for Currents up to 41 A, mm Pitch
POWER COMBICON Plugs nd Heders PC 6/ for Currents up to 41 A, The PC 6 plug connector fetures highly conductive metl lloys to offer current crrying cpcity of 41 A t rted voltge of 1000 V. A double steel
2/2 4/4 Solenoid Directional Seat Valve, ISO Size 03
2/2 4/4 Solenoid Directionl Set Vlve, ISO Size 03 Q mx = 20 l/min, p mx = 315 r idirectionl set-vlve shut-off, direct cting, electriclly operted 1 Description he W2N / W2 series of 2/2 4/4 solenoid operted
Vacuum Relief Performance Curves
Vacuum Relief Valves Crispin Vacuum Relief Valves Valve Function llows air to enter system when vacuum occurs Prevents air exhaustion during pump start-up Features Cracks open to admit air at.25 PSIG differential
Roller and ball bars for easy and safe die change
Roller nd bll brs for esy nd sfe die chnge T-slot tolernces cc. to DIN 6 b c h n min. mx. mx. 8 H8 + +,6 H8 37 +3 +,6 8 H8 +4 0 + 48 56,6 H8 56 +4 5 +3 6 7,5 Dimensions in mm h min. = smllest dimension
GATE VALVES ALV-1 FORGED STEEL NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS. ANSI Class PN /4-2 DN 8-50.
FORGED STEEL GTE VLVES LV-1 NOMINL PRESSURE NSI Class 150-1500 PN 16-250 NOMINL 1/4-2 DN 8-50 MTERILS Carbon Steel Low lloy Steel Stainless Steel CONNECTIONS Socket Weld Butt Weld Threaded Flanged XELVLVES
Boring Instructions for Steel Hubs
Couplings teel Hub Boring, Keyseting, etscrews & Puller Holes All Types (Pge 1 of 8) Figure 1 Figure 2 Figure 5 Boring Instructions for teel Hubs Refer to the pproprite selection guide for coupling hub
POWERHEAD. Section 4A - Cylinder Head. Rocker Shaft and Rocker Arm... 4A-21 Camshaft... 4A-22 Cylinder Head... 4A-24
POWERHEAD Section 4A - Cylinder Hed CYLINDER HEAD Tle of Contents Specifictions........................... 4A-2 Specil Tools........................... 4A-4 Cylinder Hed.......................... 4A-6
Application Examples of Air-piloted Valves
ir-piloted Vlves Fetures Since the unit requires ir piping only, with no need for electricl wiring, it cn e hndled y person without fer of electricl shocks or current lekge. Using no electricity mens tht
Data Sheet T /4/5/6 EN
Dt heet T 8310-1/4/5/6 EN Pneumtic Actutors up to 750v2 cm² Type 3271 Type 3277 for integrl positioner ttchment Appliction Liner ctutors prticulrly suitble for ttchment to eries 240, 250, 280 nd 290 Vlves
Section 11 Galvanised Flanged Fittings
Section 11 Galvanised Flanged Fittings Edition 3 167 [11] GLVNISED FLNGED FITTINGS Material Specifications 3" - 80mm Galvanised Flanged Irrigation Fittings 4" - 100mm WLL THIKNESS FOR FITTINGS 5" - 125mm
AWWA Grooved Fittings
WW Grooved Sumittl Form WW Grooved Fittings SUMITT INFORMTION PROECT NME: ENGINEER: CONTRCTOR: WW Grooved Fitting SPEC. SECTION: MEMER FETURES & DVNTGES Fittings supplied with rigid rdius grooves in ordne
FE-1000 INSERTION TYPE AIRFLOW SENSING ELEMENT
Technical Data Sheet FE-1000 INSERTION TYPE IR SENSING ELEMENT DESCRIPTION The FE-1000 is an insertion type airflow sensing element designed for quick, easy installation through a small cutout in the existing
Technical specification. Model Max.flow rate (l/min) Working pressure (MPa) Single solenoid double solenoids. Weight (kgs) Spool return
WE series solenoid directionl control vlves WE series directionl control vlves re solenoid operted directionl spool vlves, these vlves re used to the strt, stop nd direct oil flow. echnicl specifiction
Summary 0163EN. Chapter 5 - Couplings A70 Double Jacket Brass Coupling A70 Single Jacket Brass Coupling 37 A71 Forestry Coupling 37
pril 2008 0163EN Summry Fire protetion produts hpter 1 - Hose, Sprinkler Vlves nd essories 53 Gte Vlve 300 l. Rted 4 53G Single Hydrnt Gte Vlve 4 50 ngle Hose Vlve with Hydroltor 5 51 ngle Hose Vlve with
MODEL UMC UNIVERSAL MANIFOLD CHECK ASSEMBLY
077 irpark Dr. Standish, MI 88 989-8-8 www.globesprinkler.com Technical Support 989--00 techservice@globesprinkler.com MODEL UMC UNIVERSL MNIFOLD CHECK (With or Without Control Valve) ¼", ½", ", ½", 7.mm,
FUEL SYSTEM. Table of Contents. Specifications. Section 3A Electric Fuel Pump FUEL SYSTEM. Fuel Recommended Gasoline Recommended Oil
FUEL SYSTEM Section 3A Electric Fuel Pump Tble of Contents Specifictions........................... 3A-1 Fuel Pump Assembly.................... 3A-2 Specil Tools........................... 3A-3 Fuel Lift
Maximum leakage rate is less than half of the AWWA allowable Can be adapted to any channel Low-maintenance gates ***
Maximum leakage rate is less than half of the WW allowable Can be adapted to any channel Low-maintenance gates *** The Fontaine gate is designed to control water flows in channels. It is the same construction
PE-5000 DUCT STATIC PRESSURE SENSING ELEMENT
Technical Data Sheet PE-5000 DUCT STTIC PRESSURE SENSING ELEMENT DESCRIPTION Model PE-5000 units are insertion-type primary duct pressure sensing elements designed to achieve pressure signal accuracy and
Directional Control Valves. General Description. Features. Specifications
echnicl Informtion Generl Description directionl control vlves re high performnce, 5-chmer, direct operted, wet rmture, solenoid controlled, 3 or 4-wy vlves. hey re ville in 2 or 3-position nd conform
4/2- and 4/3-way shut-off valve
Courtesy of CMA/Flodyne/Hydrdyne Motion Control Hydrulic Pneumtic Electricl Mechnicl (00) 426-540 www.cmfh.com 4/2- nd 4/3-wy shut-off vlve Type Z4WE Size 6 Component series 3X Mximum operting pressure
Wirewound Resistor, Industrial High Power, Vitreous Tubular, Adjustable, Low Values 0.12 to 560
Wirewound Resistor, Industrial High Power, Vitreous Tubular, djustable, Low Values to 560 FETURES High power rating: 16 W to 600 W at 25 C Heavy overloads 10 P n 15 s 1 % Low ohmic values 0.10 available
Atlas Copco Drills. Higher level of performance
Atls Copco Higher level of performnce Pistol Grip LBB, COMBI Regrdless of which model you choose, you'll get product with superior ergonomics nd productivity. Quiet Very low noise level. Comfortble grip
STANDARD PRODUCTS CATALOGUE Components for Lighting Columns, Sign Posts, CCTV & Power Transmission Poles
STNDRD PRODUCTS CTLOGUE Components for Lighting Columns, Sign Posts, CCTV & Power Transmission Poles Issue 9 Jan 2014 The Regent Engineering Co. (Walsall) Ltd - Salisbury Street - Darlaston - Wednesbury
UNIVERSAL ALUMINIUM CASE
UC SERIES UNIVERSAL ALUMINIUM CASE 3 2 4 Simple structure nd tough cse with extruded luminium covers. 36 sizes nd 3 different colors for totl of 108 different combintions re vilble. 2 or 3 grooves vilble
Pneumatic Actuators 1000, 1400, 2800, and 2 x 2800 cm² Type 3271 and Type 3277 for integral positioner attachment Hand-operated Actuator Type 3273
Pneumtic Actutors 000, 400, 2800, nd 2 x 2800 cm² Type 27 nd Type 277 for integrl positioner ttchment nd-operted Actutor Type 27 Appliction Liner ctutor in prticulr for ttchment to Series 240, 250, nd
CC-410 KIT SERIES INSTRUCTION SHEET
(COMPLETE CC-410-W KIT ILLUSTRTED. CUT-OUTS IN TRCK & FSCI TO EXPOSE COMPONENTS) CC-410 KIT SERIES INSTRUCTION SHEET CROWDERTRCK S CTCH N CLOSE TM SYSTEM PREVENTS BOUNCING ND SLMG OF SLIDING DOORS. CN
AWWA Grooved Fittings
WW Grooved Produts WW Grooved Fittings MTERI SPECIFICTIONS Mteril - Dutile Iron per STM 53 Grde 5-45-12. Interior lining - Cement lined per NSI/WW C104/21.4 sizes 3 single thikness nd sizes 4-3 doule thikness
MODELS GED/GSD, eged/egsd, DFE/DFS, DDE/DDS
LINE OVERVIEW Jenco s Direct Drive Sidewall Propeller line is designed to exhaust or supply large volumes of air at relatively low static pressures. With 3 types of construction, the direct drive models
1000 SERIES SURFACE MOUNTED CLOSERS
1000 SERIES SURFCE MOUNTED CLOSERS PPLICTIONS n For aluminum, hollow metal, or wood swinging doors and frames. n Can be used with hinge or pivot mounted door. n Mounts on 1-3/ transom without adapter plates.
Spring Return DuraDrive Two-Position Actuator
MA40-704x Series, MA4-707x Series, nd MA4-75x Series Spring Return DurDrive Two-Position Actutor For spring return pplictions tht require twoposition control of dmpers nd vlves in HVAC system. Fetures: