CARRIAGE AND PLOW BOLTS
|
|
|
- Harold French
- 5 years ago
- Views:
Transcription
1 CAAG AND PW BS 1 FAUS: Standard Carriage Bolts Flat Head levator Bolts High Strength Fully hreaded Grade 5 Shaker Screen Bolts Ultimate High Strength 150,000 PS # Dome Head Plow Bolts Full Diameter Shanks Fully Formed Heads Sharp Accurate hreads Special Chromate Plating chromate SPCA fastens H SUN F all YU SPCA APPCANS. All Chromate carriage, elevator, shaker screen and plow bolts are manufactured to exacting specifications. hey feature a unique square neck with sharp edges that prevents the bolt from turning when the nut is tightened. Special chromate plating provides corrosion resistance and durability. Use Chromate Special Fastening Systems when the proper fastener is the only acceptable solution. CHMA NDUSA CP. XCPNA PDUCS, SVC AND NNVAV SUNS
2 F M NFMAN N U PDUCS SYSMS, CA 1800BUYB
3 CAAG AND VA BS UND HAD CAAG BS CAAG BS SQUA NCK AND CAN, SHAP USS HADS DUAB CHMA PANG NUS N NCUDD BN NGH / 1 11/ 11/ 1/ 1/ 1/ 1/ 1/ 5 51/ 6 61/ 7 71/ /16 DA. 1/ DA. 5/16 DA. /8 DA. 7/16 DA. 1/ DA. 5/8 DA. / DA N 878 N N 871 N 879 N N 87 N N 87 N N N 8 N 88 N N 85 N 89 N N 86 N 850 N N 87 N FA HAD VA BS AND FNSHD HX NUS Flat head elevator bolts with square neck and clean, sharp USS threads. Durable Chromate plating. VA BS FNSHD HX NUS 776, 1776 & 177 NUS N NCUDD NGH 1 11/ 11/ 1/ 1/ DA. 5/16 DA. / HX NU SZ PA /16 (10) 510 1/ / / / / F M NFMAN N U PDUCS SYSMS, CA 1800BUYB 1.1
4 SHAK SCN AND PW BS HAAD GAD 5 BS F HGH SNGH High carbon content, 10,000 PS bolts with U.S.S. threads and square neck. Nuts not included. FUY HADD SHAK SCN BS # HAD PW BS 1 DUAB CHMA PANG GAD 5 CAAG B NGH 11/ 1/ 1/ 1/ 5 51/ 6 8 1/ DA. 5/8 DA. / DA. NGH 7/16 DA. 1/ DA / 11/ 1/ 1/ / 1/ # DM HAD PW BS & FNSHD HX NUS HAAD GAD 8 BS F UMA HGH SNGH High carbon content, 150,000 PS bolts with U.S.S. threads and square neck. Nuts not included. # DM HAD PW BS GAD 8 HX NUS NGH 11/ 1/ 1/ 1/ 1/ 1/ 1/ 5 51/ 6 61/ 7 5/8 DA. / DA. 7/8 DA. 1 DA. 11/ DA A A A 997 SZ PA SZ PA 7/ /10 N 89 1/ / / H HX NUS SZ PA SZ PA 1/ / /811 N / F M NFMAN N U PDUCS SYSMS, CA 1800BUYB
5 GAD HX AP BS H PVNV MANNANC HX AP B A low carbon, hex head bolt with a machined point which is threaded to the head. US N DD AND APPD HS HADD FU NGH US NSAD F A SUD AND A NU MS AS QUVAN S CKW B80 B100 55,000 PS PF AD 57,000 PS MNMUM YD SNGH 7,000 PS MNMUM NS SNGH 18% MNMUM NGAN 1 NGH 1/ 5/8 / 1 11/ 11/ 1/ 1/ 1/ / 1/ 1/ / 1/ 5 51/ 6 1/ DA. 5/16 DA. /8 DA. 7/16 DA. 1/ DA. 5/8 DA. / DA. USS 0 USS 18 USS 16 USS 1 USS 1 USS 11 USS N N N N 07 N N N N 06 N N 06 N N N N 051 N 066 N N 05 N N N 05 N N 06 N N 07 N FNSHD HX NUS UNF M FAWASHS CK WASHS SZ PA 1/ / / / / / /10 51 SZ PA 1/ U /16 U 6501 /8 U 650 7/16 U 650 1/ 650 5/ / 6507 SZ PA 1/ U /16 U 711 /8 U 711 7/16 U / U /8 U 71 / U F M NFMAN N U PDUCS SYSMS, CA 1800BUYB 1.
6 BN ASSMNS CAAG BS 0Compartment Steel Bin You eceive a 0Compartment Bin abeled for 0 of the Fastest Moving Sizes Needed in Maintenance! PA N. 787 N S 0H BN /" wide, 1/" high, 1" deep* *Can be shipped via UPS NCUDD N H GNA ASSMN YU W CV 0 DFFN MS. YU W B AB F N ADDNA SZS ACH MNH N MY SVC CA. CMPAMNS A FUY ABD. (See PlanAGraph for complete details) ASSMN CNANS: 6 Sizes Carriage Bolts... 1/" thru 1/" Diameter Sizes Alloy Finished Hex Nuts... 1/" thru 1/" Diameter 1 P/N 790 0Compartment Bin CHMA Quality...Service...Performance 1A.1
7 CAAG B BN ASSMN P/N MS / 0 HS 1/0 1/ x / 1/ x 1 1/ x 11/ 1/ x 11/ 1/ x 1/ 1/ x 1/ x 1/ HX NU CAAG CAAG CAAG CAAG CAAG CAAG CAAG 500 B B B B B B B /1618 1/ x 1/ x 1/ 1/ x 1/ x 1/ 1/ x 5 5/16 x 1 5/16 x 11/ HX NU CAAG CAAG CAAG CAAG CAAG CAAG CAAG 50 B B B B B B B /816 5/16 x 11/ 5/16 x 1/ 5/16 x 5/16 x 1/ 5/16 x 5/16 x 1/ 5/16 x HX NU CAAG CAAG CAAG CAAG CAAG CAAG CAAG 50 B B B B B B B /1 /8 x 1 /8 x 11/ /8 x 11/ /8 x 1/ /8 x /8 x 1/ /8 x HX NU CAAG CAAG CAAG CAAG CAAG CAAG CAAG 508 B B B B B B B /8 x 1/ /8 x 1/ x 11/ 1/ x 1/ x 1/ 1/ x 1/ x 1/ 1/ x CAAG CAAG CAAG CAAG CAAG CAAG CAAG CAAG B B B B B B B B A. CHMA Quality...Service...Performance
8 BN ASSMNS GAD HX AP BS 0Compartment Steel Bin You eceive a 0Compartment Bin abeled for 0 of the Fastest Moving Sizes Needed in Maintenance! PA N. 789 N S 0H BN /" wide, 1/" high, 1" deep* *Can be shipped via UPS NCUDD N H GNA ASSMN YU W CV 0 DFFN MS. YU W B AB F N ADDNA SZS ACH MNH N MY SVC CA. CMPAMNS A FUY ABD. (See PlanAGraph for complete details) Use Bin abel Set #168 ASSMN CNANS: 5 Sizes Grade Hex ap Bolts... 1/" thru 1/" Diameter 5 Sizes Finished Hex Nuts... 1/" thru 1/" Diameter 5 Sizes UniFit M Flat Washers... 1/" thru 1/" Diameter 5 Sizes ock Washers... 1/" thru 1/" Diameter 1 P/N 790 0Compartment Bin CHMA Quality...Service...Performance 1A.
9 GAD HX AP BS ASSMN P/N 789 USS SZS 0 MS / 0 HS 1/0 1/ 1/ FNSHD UNF M CK HX NU FA WASH 500 WASH /1618 5/16 5/16 FNSHD UNF M CK HX NU FA WASH 50 WASH /8 /816 /8 UNF FNSHD M CK FA HX NU WASH WASH /161 7/16 7/16 FNSHD UNF M CK HX NU FA WASH 506 WASH /1 1/ 1/ FNSHD UNF M CK HX NU FA WASH 508 WASH / x 1/ 1/ x / 1/ x 1 1/ x 11/ 1/ x CAP SCW CAP SCW CAP SCW CAP SCW CAP SCW /16 x 1/ 5/16 x / 5/16 x 1 5/16 x 11/ 5/16 x CAP SCW CAP SCW CAP SCW CAP SCW CAP SCW /8 x / /8 x 1 /8 x 11/ /8 x 11/ /8 x CAP SCW CAP SCW CAP SCW CAP SCW CAP SCW /16 x 1 7/16 x 11/ 7/16 x 7/16 x 1/ 7/16 x CAP SCW CAP SCW CAP SCW CAP SCW CAP SCW / x 1 1/ x 11/ 1/ x 1/ x 1/ 1/ x CAP SCW CAP SCW CAP SCW CAP SCW CAP SCW A. CHMA Quality...Service...Performance 10100
GRADE 5 FASTENERS CHROMATE INDUSTRIAL CORP. CHROMATE GRADE 5 FASTENERS MEET ALL GRADE 5 SPECIFICATIONS.
GADE 5 FASEES Heat-reated Alloy Steel Minimum 120,000 psi ensile Strength Special Chromate Protective Plating Class 2A Precision olled hreads Excellent Elongation Properties Smooth, Chamfered End Heat
FP 106 x PTM - PS
Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:
Microbore Hose, Assemblies & accessories
bar DN2 and DN4 High pressure Microbore hose Technical data Microbore hose The microbore hose assembly, most commonly used to connect to a Minimess test point for pressure testing, has many other diverse
ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,
F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200
Process connection. Further designs. Order code. to EN
Replacement measuring cell for pressure for SITRANS P, DS III, DS III PA and DS III FF series 7 M F 4 9 9 0-7 7 7 7 0-0 D C 0 0.01... 1 bar g (0.15... 14.5 psi g) B 0.04... 4 bar g (0.6... 58 psi g) C
Keystone F89 pneumatic quarter-turn actuator General purpose / hazardous area
Compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators Features Direct mounting to all Keystone butterfly valves
KEYSTONE F89 pneumatic quarter-turn actuator GENERAL PURPOSE / HAZARDOUS AREA
compact, reliable and low operation costs for all types of quarter-turn valves are the keywords of the Keystone F89 range of pneumatic actuators FEATURES Direct mounting to all Keystone butterfly valves
TM ETRS-TM35FIN-ETRS89 WTG
Noise calculation model: ISO 9613-2 General Wind speed: 8,0 m/s Ground attenuation: General, Ground factor: 0,4 Meteorological coefficient, C0: 0,0 db Type of demand in calculation: 1: WTG noise is compared
* Screw clearance to allow bolt head to pass through - no counter bores
Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with
Safety 14 ga. Welded Plastic Bin Security Fire Resistant Gas Cylinder
All Cabinets Ship Flyer CAB07B...Many in 48 hrs. Heavy Duty All Welded CABINETS 40 Models Safety 14 ga. Welded Plastic Bin Security Fire Resistant Gas Cylinder Powder Coated Finish Safety Cabinets are
Hexagonal Fasteners. Characteristics of BYG Hexagonal Bolts
Hexagonal Fasteners 2.9 Quality 70.000 P.S.I. (20 Kg/mm 2 ) Elastic oad imit 40.000 P.S.I. (00 Kg/mm 2 ) C35-38 Hexagonal Fasteners Coarse Bolts (U.S.S. COARSE UNC-2A) Fine Bolts (S.A.E. FINE UNF-2A) Coarse
S: With magnet. Bore x stroke (basic type) Cushion P: pneumatic adjustable
series MK Standard cylinders according to ISO 15552 How to order? M K A P S 50 x 100 M: Marani A: Double acting S: With magnet Bore x stroke (basic type) K: According to ISO 15552, Mickey-mouse type Cushion
D-subminiature Backshells - Two-Piece D*H Series
Backshells - Two-Piece D*H Series Standard two-piece construction available in plastic, metallized plastic, or diecast zinc versions with 180 straight cable entry. Fits standard metal shell D-subminiature
SITRANS P measuring instruments for pressure
Overview Siemens AG 009 Supplementary electronics for 4-wire connection Design Dimensions (W x H x D) in mm (inch) Electrical connection 80 x 10 x 60 (3.15 x 4.7 x.36) Screw terminals (Pg 13.5 cable inlet)
General Information. Related Documents. Notations and Conventions R B F L R B F L
Part Lists Great Plains Manufacturing, Inc. 1 Press Wheel Mount Update Kit 25 and 25AP Series Implements When you see this symbol, the subsequent instructions and warnings are serious - follow without
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Sub-base non plug-in 4 6 Air return Manual operator Solenoid 4-way pilot with balanced poppet Bonded spool 2 7 8 2 67
KEYSTONE F89 PNEUMATIC QUARTER-TURN ACTUATOR GENERAL PURPOSE / HAZARDOUS AREA
FEATURES Direct mounting to all Keystone butterfly valves and ball valves. Valve connection compatible with Keystone (imperial and metric) and ISO 5211. Double Rack and Pinion design nullifies side loads
MCC omponents Itasca Street Chatsworth
omponents 21201 Itasca Street Chatsworth!"# $%!"# SMBJ5.0 THRU SMBJ170CA Features For surface mount applications in order to optimize board space Low profile package Fast response time: typical less than
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual Flat Belt Center Drive LPZ Conveyors Table of Contents Warnings General Safety........................... 2 Introduction.......................................
Stars or starlets? Competitor overview switching devices. Only for internal use. sirius IN COMPARISON
Only for internal use Stars or starlets? Competitor overview switching devices sirius IN COMPARISON Who are the real stars? The comparison. Under ideal conditions, the human eye can make-out approximately
P72F P74F P74F-AD P7 F- - 1/4" (72) 2 3/8" 3 1/2" (74) 4 3/4" (74) 6. ISO G parallel
Excelon valves P72F, P74F Smooth start/exhaust valves Excelon design allows in-line or modular installation Controls increase of downstream pressure on start up. Cylinders and other air operated devices
7 1/2', 8 1/2' and 9 1/2' MVP PLUS Snowplows
Western Products, PO Box 508, Milwaukee, WI 5 958 www.westernplows.com December 5, 06 Lit. No. 9, Rev. 00 7 /', 8 /' and 9 /' MVP PLUS Snowplows Mild Steel Blades 75, 85, 95 Poly Blades 575, 585, 595 H,L&T
Flat Belt Center Drive LPZ Conveyors
Flat Belt Center Drive LPZ Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975 Cottonwood Ave. TEL: 1-800-397-8664 TEL: 262-367-7600 Hartland,
VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY!
F.A.A.-P.M.A. MODEL 1U128A AND 1U128B REVISION 17 February 21, 2002 VACUUM PRESSURE PUMPS INSTALLATION CAUTIONS AND INFORMATION READ AND FOLLOW CAREFULLY! The following information applies to all installations
MAC VALVES, INC. Rev. T
REVISION LEVEL DATE RELEASED CHANGE DESCRIPTION ECN NUMBER P.E. APPROVAL P.D APPROVAL A 5-11-95 ENGINEERING RELEASE 12727 EPJ B 1-15-96 ADDED 35 SERIES 13228 EPJ ADDED MOD 2938 TO 6500 SERIES, MODS 2910
Temperature Measurement Resistance thermometers
Temperature transmitters for mounting in the connection head The following temperature transmitters are available for mounting in the connection head: SITRANS TH100 Programmable two-wire temperature transmitter
Installation, Maintenance & Parts Manual
Installation, Maintenance & Parts Manual 2100 Series Center Drive Conveyors Table of Contents Warnings General Safety........................... 2 Introduction....................................... 2
Rating of certified products
Rating Model No. Rated voltage Applicable wire/rated current Tightening torque PT- PT- 0 PT-0 PT-0 PT- 800V 00V 1.mm2 16A 1.mm2 15A A A (8mm2) (50A) 95A 132A 175A 0mm2 2A 3A 2 mm2 A 8mm2 50A 75A 132A 175A
SERVICE BULLETIN MANDATORY
652 Oliver Street Williamsport, PA 17701 U.S.A. Tel. 570-323-6181 Fax. 570-327-7101 www.lycoming.com MANDATORY SERVICE BULLETIN DATE: July 20, 2007 Service Bulletin No. 574A (Supersedes Service Bulletin
Hex Key Foldups Short Arm Hex Keys Long Arm Hex Keys Ball-Plus Hex Keys Ball-Plus Cushion Grip T-Handles 489
Hex Foldups... 485 Short Arm Hex s... 486 Long Arm Hex s... 487 Ball-Plus Hex s... 488 Ball-Plus Cushion Grip T-Handles 489 13 A L L E N H E X K E Y S 483 Hex s William G. Allen patented a cold drawing
EXHIBIT LIST. No Exhibit Name Page. 1 P5389_Dzwigaj_01_LocationMap.pdf (P5389) 2. 2 P5390_Dzwigaj_02_Construction.pdf (P5390) 3
XHB L fc : HL/193 P: M usz zwgj Pubshd b : husdy 17-v-216 Pg 1 f 1 xhb m Pg 1 P5389_zwgj_1_LcMp.pdf (P5389) 2 2 P539_zwgj_2_suc.pdf (P539) 3 3 P5391_zwgj_3_p.pdf (P5391) 4 4 P5392_zwgj_4_dsb.pdf (P5392)
Features. Specification. Model. Acting type. Tube I.D. (mm) Stroke (mm) 5, 10, 15 5, 10, 15, 20. Port size. Proof pressure.
MCGS series ø6, ø0 Features Multi-ports as standard enabling both direction mounting. Non-rotating accuracy ± 0. mbedding type sensors. The sensor cable will be in the same direction as the piping tube
Housing Styles. Square Aluminum Block
Page 1 of 18 Housing Styles Square Aluminum Block AB General purpose temperature Accomodate a variety of elements Type A B Customize AB1 0.187" 0.75" AB2 0.250" 0.75" AB3 0.250" 1.25" AS Square Aluminum
All GP Impact Sockets feature the GP High Torque Drive Benefits are:
GP is Grey Pneumatic (GP) through our distributors supplies the world s automotive, industrial, assembly, mining, maintenance, construction, and energy industries with heavy duty, high quality impact and
TORC.COM TORC. Innovative Torque Technology
h i m e u ng ha l ch an ite sa es nd im th a n ds d c h f s f ite l e u ge fr lea ig as ree d c h im sa s ee ra hfl t s bo lea ch an ite fas bo nc ow wit lt ra d c hi t lt e p c in n a d he ng s f l gh
Air-oil Systems. Air-oil Systems
2 3 r r r ff ff ff 4 5 6 7 8 9 Socket type No. of cores Finished cord OD Conductor sectional area 2 cores f6.6mm 0.75mm 2 DIN socket (equivalent to 3 cores f7mm AWG6 to 20) Socket type Cable OD Conductor
Index INDEX. Product overview Technical data... 5 RHL Sliders for RHL80: V100, V250 & V RHL
LINEAR UNIT RHL Svanemærket tryksag 541-713 INDEX Index Product overview... 4 Technical data... 5 RHL... 6 Sliders for RHL: V1, V25 & V5... 7 RHL11... 8 Sliders for RHL11: V2 & V5... 9 Mounting Plates...
Double Pump Operating Specifications
Double Pump Operating Specifications Shaft End Pump Cover End Pump Typical Typical Typical Typical del. input del. input Delivery L/min kw Delivery L/min kw USgpm @ (USgpm) (hp) USgpm @ (USgpm) (hp) 12
7-1/2', 8-1/2', and 9-1/2' MVP PLUS Snowplows
Western Products, PO Box 508, Milwaukee, WI 5-958 www.westernplows.com January 5, 09 Lit. No. 89, Rev. 05 7-/', 8-/', and 9-/' MVP PLUS Snowplows Mild Steel Blades 75-, 85-, 95- Poly Blades 575-, 585-,
163 40 41a 9 11 154 46 148 39 10 43 42 32 31 35 33 37 41 45 149 150 153 162 34 36 44 42-1 38 38A 46 113 112 8 15 157 155 1A 14 3 12 1 152 13 9 2 151 4 5 18 19 161 17 16 18 23 21 22 7 6 25 22A 30 7 6 29
82" RO 81 1/4" FD 3/8" MIN JOINT 75 5/8" DLO 2 13/16" SERIES 8200 HORIZONTAL SLIDING WINDOW ELEVATION - BLOCK INSTALL 82" RO 81 1/4" FD
800 SERIES SPECIFICATIONS WINDOWS The Series 800 Horizontal sliding Window offers that rare combination of smooth operation, durability, and toughness. It has a 4-/" (4) deep frame designed to match typical
Vacuum Automation 2.1. The future depends on good product choices
Vacuum Automation 2.1 The future depends on good product choices Combined pump and gripper 432 433 Combined pump and gripper Introduction...434 Small...436 Medium...438 Large...452 Accessories...455 434
Blade and Off-Truck Kit
Fisher Engineering 50 Gordon Drive, Rockland, Maine 0484-9 www.fi sherplows.com 4485-, 4495-44775-, 44785-, 44795-85000-, 85500- December 5, 0 Lit. No. 8504, Rev. 00 Blade and Off-Truck Kit XtremeV Snowplow
IBS, incorporated Index Steel Pipe Fittings S T E E L F I T T I N G S
B, incorporated ndex teel ipe ittings A Assortments ipe ittings 9 - Drawer -8, -9 5 - Cabinet - 54 - Bin -0 57-40B Bin -9 ipe ittings -2 45 lbows -2 90 lbows -2 Bell Reducers - Couplings Merchant teel
NewLife PARTS LIST PARTS LIST PARTS LIST PARTS LIST PARTS LIST PARTS LIST PARTS LIST. Figure 1: NewLife Main View. NewLife Intensity 8 Item Number
Figure : Main View Elite Intensity Intensity 0 CA0-4 CA0-4 CA0-4 CASE, SIDE* 2 See Pages & See Pages & See Pages & FRONT PANEL ASSY 2 SC00- SC00- SC00- SCREW, FRONT CASE TO FRAME 4 See Pages & 4 See Pages
Guy Attachments. P151X or P152X. Measurements (in) Overall Length (in) P133AX 3 15/16 1 5/8 13/16 x 1 2 1/2 2 7/8 5 1/
Provide economical and effi cient means of fastening guys to poles Well rounded wire grooves protect the strand from damage Wherever possible, installation should be made under the head of a machine bolt
Blade and Off-Truck Kit
Fisher Engineering 50 Gordon Drive, Rockland, Maine 0484 9 www.fisherplows.com 800, 800, 800 800, 800 8000, 800(CH), 8000 March, 05 Lit. No. 400, Rev. 0 Blade and Off-Truck Kit XV Snowplow Includes Central
CA036-4 CA036-4 CA036-4 CASE, SIDE, LIGHT GRAY * 2 1
Figure : Main View Elite Intensity Intensity 0 CA0- CA0- CA0- CASE, SIDE, LIGHT GRAY * CA0- CA0- CA0- CABINET, ASSY, SIDE PANEL, SPARE, DARK GRY * See Pages & See Pages & See Pages & FRONT PANEL ASSY CA0-
LYCOMING CYLINDER PRICING
SHIPPING: 2415 EMBARCADERO WAY, PALO ALTO, CA 94303 MAILING: P.O. BOX 50608, PALO ALTO, CA. 94303-0608 Phone: 650-354-1399 Fax: 650-354-1395 LYCOMING CYLINDER PRICING CYLINDER PRICING ENGINE MODEL: O-235
QA/8000. Guide blocks with plain bearings/ roller bearings Ø 32 to 100 mm
Guide blocks with plain bearings/ roller bearings Ø 3 to mm Conorms to ISO 643, VDMA 46 and NFE 49 3 Ensures protection against external rotary and bending orces Guide rods run through bearings protected
Table Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11
able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter
Guide blocks for ISO/VDMA cylinders
Actuators Guide blocks or ISO/VDMA cylinders QA/8/51/ QA/8/61/ QA/8/81/ (long coupling) QA/8/85/ (short coupling) Ø 32 to 1 mm QA/8/61/ QA/8/51/ Conorms to ISO 6431, VDMA 24562 and NFE 49 3 1 Ensures protection
HEAVY DUTY PARTS MANUAL
HEAVY DUTY PARTS MANUAL REV. 1 RELEASED: 3/19/2013 Table of Contents 1. Complete Unit Pg. 3 2. Heavy Duty Moldboard Pg. 4 3. Heavy Duty Side Panel with Wear Shoe Pg. 5 4. Installation of Side Panel to
660 Series DIG-R-MOBILE FORM GOM , VERSION Replacement Parts DIG-R-MOBILE (660)
0 Series DIG-R-MOBILE FORM GOM0990, VERSION. Replacement Parts DIG-R-MOBILE (0) 0 Series DIG-R-MOBILE FORM GOM0990, VERSION. Control Handle Assembly 0H And 0V DIG-R-MOBILE (Serial Numbers 0 Thru ) 0 Series
CIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT
A15-1 TM CIC 200 SLOTTED BINDING HEAD MACHINE SCREW ASSORTMENT P/N 7705 Precision, burr-freethreads for exact fit Special chromate plating resists rust and corrosion for easier removal 1180 6-32 x 1/2
Set-up, Operation & Maintenance Manual
Set-up, Operation & Maintenance Manual 2100 Series Center Drive Conveyors Table of Contents Warnings General Safety.................... 2 Introduction................................ 2 Product Description..........................
CI/W_ C2 C2A CI/W_ C2 C2A
ARMS, AND BASES GUIDE ARMS, AND BASES This section showcases a vast assortment of mounting arms, s, and bases. Poles are available in steel or aluminum, with varying wall thickness. Whether classic, traditional
FOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
Rodless cylinders. Series General. Construction characteristics. Technical characteristics. Use and maintenance
Series 1600 Rodless cylinders General The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders. On a traditional rod type cylinder, the total space occupied
Process Valve. 2 Port Valve For Compressed Air and Air-hydro Circuit Control
Process Series Port For Compressed Air and Air-hydro Circuit Control Exclusively for air pressure system and air-hydro circuit control Universal Port Cylinder actuation by external air he balance poppet
REV: 000. Super Seca Flash Cure Units
REV: 000 Super Seca Flash Cure Units Table Of Contents Introduction 2 Standard Operating Guide 2 Features & Specs 2 External Layout 4-15 Internal Layout 16-24 Plug Guide 25 Wiring Diagrams 26-28 F.A.Q.
20" STEEL DECK LIGHT WEIGHT (Standard & OPP) WALK BEHIND MOWERS SERIES 0
Parts Manual for (Standard & OPP) WALK BEHIND MOWERS SERIES 0 MODEL D20380 EDLW400R2 ELW400 R20400 McDonough, GA, 30253 U.S.A. COPYRIGHT 2005 SNAPPER PRODUCTS, INC. ALL RIGHTS RESERVED. Revision 1, 9/22/2005
Service Letter. Service Letter No. 060 CD Series Combustion Heater Fuel Shroud & Hardware Supersedure. 1. Planning Information
2900 Selma Highway Montgomery, AL 36108 USA Tel: 334-386-5400 Fax: 334-386-5450 Service Letter CD Series Combustion Heater Fuel Shroud & Hardware Supersedure 1. Planning Information A. Effectivity (1)
The Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
MS 2500 FLANGED SENSOR WITH A WIDE RANGE OF FLANGE SIZES. Warranty conditions are available on this website: only in English version
FLANGED SENSOR FLANGED SENSOR WITH A WIDE RANGE OF FLANGE SIZES Warranty conditions are available on this website: www.isomag.eu only in English version INDEX TECHNICAL DATA... 3 OVERALL FEATURES...3 STANDARD
Blade and Off-Truck Kit
Fisher Engineering 50 Gordon Drive, Rockland, Maine 08-9 www.fi sherplows.com 8000, 800(CH) 800, 800, 87000 8700, 8700, 8700 September, 08 Lit. No. 070, Rev. 0 Blade and Off-Truck Kit XV Snowplow Includes
SERVICE INSTRUCTION. 652 Oliver Street Williamsport, PA U.S.A. Tel Fax
652 Oliver Street Williamsport, PA. 17701 U.S.A. Tel. 570 323 6181 Fax. 570 327 7101 www.lycoming.com SERVICE INSTRUCTION DATE: March 8, 2012 Service Instruction No. 1098H (Supersedes Service Instruction
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Series ISO Individual mounting Valve only No base non plug-in Conform to ISO 99/ Valve only No base plug-in Conform to ISO 99/ Manifold mounting Valve
Instruction Sheet Kit Number:
Instruction Sheet Kit Number: 72101800 TRACK CONVERSION KIT For All Wheel-Drive 921000 Models WARNING: FAILURE TO FOLLOW INSTRUCTIONS could result in personal injury and/or damage to unit. Read, understand,
4002 Series. Determing the stud length number when using receptacle: Type Type 3. G = P + F (8,9 min.) Release January 2009 G-1
Particular Features Max. tensile strength.00 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle design. Floating receptacles available. Selection Instructions
Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.
Compact Guide Cylinder: Series S ø, Compact Guide Cylinder Compact guide cylinder Heavy duty guide rod type S Z73 mm mm How to Order Number of auto switches Nil S 2 pcs. 1 pc. Auto switch type Nil Without
The Product Range. Technical Data
The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various
PRODUCT GUIDE LANDSCAPE LIGHTING
PRODUCT GUIDE LANDSCAPE LIGHTING North America fxl.com FINISHES Metals AB Antique Bronze on Powder coat Standard AB Antique Bronze on Brass AT Antique Tumbled on AT Antique Tumbled on Brass CU BS Natural
Industrial Threaded Products Inc. An authority on threaded products since 1979
R Industrial Threaded Products Inc. An authority on threaded products since 1979 Knowledge, integrity, and a dedication to service guide our business. At ITP, we stand by these principles as we have for
700E Wafer with support lugs 700K Wafer with support lugs 700S Wafer with support lugs
Large Diameter Rubber Seat Butterfly Valves for General Use E Wafer with support lugs Wafer with support lugs Wafer with support lugs Worm Gear Pneumatic Cylinder Motorized Features and Benefits Simple
SERVICE INSTRUCTION. All Certified Lycoming direct drive engines. TIME OF COMPLIANCE: At owner s discretion.
652 Oliver Street Williamsport, PA. 17701 U.S.A. Telephone +1 (800) 258-3279 U.S. and Canada (Toll Free) Telephone +1 (570) 323-6181 (Direct) Facsimile +1 (570) 327-7101 Email Technicalsupport@lycoming.com
DVD REAR SEAT VIDEO SYSTEM
Read entire instructions thoroughly before starting. TOOLS REQUIRED: DVD REAR SEAT VIDEO SYSTEM MINIVANS WITH ROOF RAILS INSTALLATION INSTRUCTIONS Non-metal trim stick Phillips screwdriver T15, T20, T25
Chevy / GMC 2500HD / WD 6" & 7" Suspension Lift Installation Instructions
www.skyjacker.com 2011-2015 Chevy / GMC 2500HD / 3500 4WD 6" & 7" Suspension Lift Installation Instructions Required Tool List: Safety Glasses Metric / Standard Wrenches & Sockets Assorted Drill Bits Floor
P1X Series. Compact Rodless Air Cylinders Contents
Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...
The friction free alternative
Rolling The Rolling Diaphragm Air Cylinder The advent of the long stroke rolling diaphragm as a means of low-friction dynamic sealing has led to the development of the ControlAir Diaphragm Air Cylinder.
CAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
Electromechanical products Multibloc General information
General information geared motors with worm and wheel gears are used to adapt the speed of the electric motor to that of the driven machine. Their size is therefore determined by the motor power (P) epressed
Direct solenoid and solenoid pilot operated valves
Direct solenoid and solenoid pilot operated valves Individual mounting Series Inline Manual operator Solenoid 4-way pilot with balanced poppet Inlet (1) Exhaust (3) Cylinder () 33 34 36 3 37 38 5 67 69
WINCH MOUNT KIT FOR POLARIS RANGER P/N ASSEMBLY / OWNERS MANUAL. Application WINCH KIT NO. 25-9xxx
WINCH MOUNT KIT FOR POLARIS RANGER P/N 25-3300 ASSEMBLY / OWNERS MANUAL Application WINCH KIT NO. 25-9xxx Before you begin, please read these instructions and check to be sure all parts and tools are accounted
Series 83. Stainless Steel Mini Cylinder
Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out
Cybex Arc Trainer 610A Service Manual. Main Assembly
Cybex Arc Trainer 610A Manual Main Assembly ITEM QTY PART NO. DESCRIPTION A1 2 11090-404 Cybex Decal A2 2 11090-405 Foot Pad A3 1 600A-301 Arc Warranty Sheet (not shown) A4 8 600A-311 Flange Spacer A5
SYSTEMS FOR VEHICLE TESTING SYSTEMS REV M KIT AND REV A KIT
136 SYSTEMS FOR VEHICLE TESTING SYSTEMS REV M KIT AND REV A KIT Extraction kits for testing centres for cars, light commercial vehicles and heavy vehicles with manual or automatic return system Equipments
Ultran Cylinders. Ultran Band Rodless Cylinders. Ultran High Load Slides. Ultran Application Checklist. Ultran High Load Electric Slides
5.3-5.4 5.5-5.12 5.13-5.23 5.24-5.32 Ultran Band Rodless 5.33-5.43 Ultran Application Checklist 5.44 Electric 5.45-5.53 Ultran Ultran Bimba Ultran SPACE SAVINGS OF ALMOST 50% IN MOST MODELS Two Models:
PRODUCT GUIDE LANDSCAPE LIGHTING. fxl.com. A Hunter Industries Company
PRODUCT GUIDE LANDSCAPE LIGHTING A Hunter Industries Company fxl.com FINISHES Metals Powder coat Standard Powder coat Specialty s AB on copper AB on brass AT on copper AT on brass CU BS SS NP BZ DG WI
Versatile. Powerful. Space-saving. siemens.com/et200sp-motorstarter
Motor starter SIMATIC ET 200SP Versatile. Powerful. Space-saving. siemens.com/et200sp-motorstarter Optimum protection for your motors and loads The SIMATIC ET 200SP motor starter with its safety and standard
Western Products, PO Box , Milwaukee, WI HTS Snowplow. Blade Assembly Center Assembly
Western Products, PO Box 4508, Milwaukee, WI 54 958 www.westernplows.com March 1, 015 Lit. No. 698, Rev. 05 HTS Snowplow Blade Assembly 69500 Center Assembly 6955 Parts List A DIVISION OF DOUGLAS DYNAMICS,
Catalog Hydraulic Couplings High Pressure
High Pressure 3 Series Threaded Actuation Design Threaded Sleeve The 3 Series coupling are designed for high pressure applications. The coupler sleeve and nipple body must be manually threaded together
2 Flutes UTCOAT. Size φ0.2~φ6 C-CER. Recommend deep rib milling using an under cut design. Total 138 models. Features
Flutes UTCOAT Size φ0.~φ C-CER Material Applications( Highly Recommended Recommended Suggested) Work Material Carbon Steels S45C S55C Alloy Steels SK / SCM SUS Prehardened Steels NAK HPM Hardened Steels
NC Self-Clinching Nuts
NC Self-Clinching Nuts Features Provide load-bearing threads in thin sheets. vailable in a broad selection of inch and metric thread sizes. Self-clinching design provides quick and permanent installation
Integrated Control modules
.604.0 - Rev: 6, Page of Integrated Control modules QC4, QC42 and QC43 Features: - Basic actuator functions for: - Spring return applications, or - Double acting applications or, - Double acting Fail in
AXLE BEAM REPLACEMENT SERVICE KITS
When sending out replacement axle beams, you must be sure to send the correct service kit for the beam size. Use the chart below to determine which service kit goes with which beam size. Illustrations
TOOLS NEWS. Tough applications require ''Plus'' performance. Series. Series Expansion. Carbide end mills MS plus B205G
TOOLS NEWS 216.1 Update B25G Carbide end mills MS plus Series Series Expansion Tough applications require ''Plus'' performance Carbide end mills MS plus General purpose end mill optimized ''plus'' performance.
PRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List
PRESSURE WASHERS 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Professional 2018 Price List 2018 For more information, contact Lorchem Technologies at: (800)
Western Products, PO Box , Milwaukee, WI HTS Snowplow. Blade Assembly Center Assembly
Western Products, PO Box 4508, Milwaukee, WI 54 958 www.westernplows.com December 15, 016 Lit. No. 94116, Rev. 00 HTS Snowplow Blade Assembly 69500 Center Assembly 6955-1 Parts List A DIVISION OF DOUGLAS
List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3