Design Kits with free lifetime refills. Ferrites Inductors RF components Gasketing Transformers Varistors
|
|
- Eugene Watkins
- 5 years ago
- Views:
Transcription
1 Design Kits with free lifetime refills Ferrites Inductors RF components Gasketing Transformers Varistors
2 Design Kits with free lifetime refills Ferrites Inductors RF components Gasketing Transformers Varistors
3 Design Kits with free lifetime refills Ferrites Inductors RF components Gasketing Transformers Varistors
4 Design Kits with free lifetime refills Ferrites Inductors RF components Gasketing Transformers Varistors
5 Intro Content Free lifetime refills Free shipping Sample availability at your fingertips to order, us at or contact your local salesperson Purchase orders or credit cards accepted Ferrites page 0-06 Inductors page 0-06 RF components page 0-06 Gasketing page 0-06 Our sales team Transformers page 0-06 Varistors page
6 Design Kit Anti-EMI Design Kit WE-CBF Design Kit WE-CBF/SMD Ferrites A must for design and test purposes In sturdy metal case, completely labelled Design Kit WE-CBF Small Size: Order Code , Version 1.0 Order Code Description Size 0 MHz (Ω) DCR max. (Ω) Rated Current max. (ma) max. Impedance (Ω) MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz SMD Ferrite WE-CBF MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz Qty. 30 Order Code , Version 1.0 Order Code Description Cable 0 MHz (1 Turn) Qty up to 8.2 mm up to 8.2 mm up to 11. mm 11 Earthing Nylon Clips up to 16. mm up to 16. mm up to 27. mm S 8. mm mm 10 STAR-GAP with defined air gap S. mm mm up to 27.0 mm up to 16.0 mm 130 STAR-RING up to 8.0 mm up to 1. mm Suppression Flat Ferrite with Snap-In 0 pol pol Suppression Flat Ferrite 26 pol pol mm mm mm - 8. mm 6 Snap Ferrite Sleeve with plastic case mm mm mm -.0 mm mm m mm mm mm m 321 STAR-TEC with safety key technology mm - 7. mm mm - 8. m mm -.0 mm pol pol. 11 STAR-FLAT pol pol CE Key 3 Subject to changes Order Code 72 7, Version 1.0 Order Code Description Qty hole ferrite bead hole ferrite bead Multiline Ferrite Suppressor EMI Suppression CPU Ferrite Plates Flexible Absorber Sheet Suppression Ferrite Cores Snap Ferrite Ring Flat Ferrite Cores Design Kit WE-CBF/SMD Ferrites Large Size: Order Code , Version 1.0 Order Code Description Size 0 MHz (Ω) DCR max. (Ω) Rated Current max. (ma) max. Impedance (Ω) Qty MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz SMD Ferrite WE-CBF MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz MHz SMD Ferrite WE-PBF.00 x 3.00 x MHz SMD Ferrite WE-PBF 8.0 x 3.00 x MHz SMD Ferrite WE-PBF 7.80 x.7 x MHz Common Mode SMD Bead WE-CMS 8.0 x.60 x MHz hole Ferrite Bead WE-SUKW 8.00 x.00 x MHz hole Ferrite Bead WE-SUKW x.6 x MHz Subject to changes
7 Design Kit for Power Inductors Linear Technology Design Kit for Power Inductors Texas Instruments Assortment of SMD Power Inductors 9 different types, 3 values and 239 components clearly arranged in a sample case Assortment of SMD Power Inductors 6 different types, 3 values and 176 components clearly arranged in a sample case Suitable for switching power supplies of Linear Technology Support for the Software: Switcher CAD III by suitable inductor equipment Suitable for switching power supplies of Texas Instruments Support for the Software SWIFT through suitable inductor equipment Order Code 7 7, Version 1.0 Order Code Description Qty. SMD-Power Inductors WE-PD3 Type S 7 1 WE-PD3, S, 1.0 μh 7 22 WE-PD3, S, 2.2 μh 7 33 WE-PD3, S, 3.3 μh 7 7 WE-PD3, S,.7 μh 7 68 WE-PD3, S, 6.8 μh WE-PD3, S,.0 μh WE-PD3, S, 1.0 μh WE-PD3, S, 22.0 μh WE-PD3, S, 33.0 μh WE-PD3, S, 7.0 μh SMD-Power Inductors WE-PD3 Type L 7 0 WE-PD3, L,.7 μh WE-PD3, L, 68.0 μh SMD-Power Inductors WE-PD Type L WE-PD, L, 1.0 μh WE-PD, L, 33.0 μh WE-PD, L, 7.0 μh WE-PD, L, 68.0 μh WE-PD, L, 0.0 μh WE-PD, L, 2.0 μh WE-PD, L, 70.0 μh SMD-Power Inductors WE-PD Type XL WE-PD, XL, 1.2 μh WE-PD, XL, 2.7 μh WE-PD, XL, 1.0 μh Order Code 7 7, Version 1.0 Order Code Description Qty. SMD-Power Inductors WE-PD2 Type S WE-PD2, S, 1.8 μh WE-PD2, S, 2.2 μh WE-PD2, S, 3.3 μh WE-PD2, S,.6 μh SMD-Power Inductors WE-PD2 Type M WE-PD2, M, 27.0 μh SMD-Power Inductors WE-PD2 Type L WE-PD2, L, 12.0 μh WE-PD2, L, 39.0 μh WE-PD2, L, 68.0 μh SMD-Power Inductors WE-PD3 Type L 7 0 WE-PD3, L,.7 μh WE-PD3, L, 68.0 μh SMD-Power Inductors WE-PD2 Type XL WE-PD2, XL,.0 μh WE-PD2, XL, 22.0 μh WE-PD2, XL, 27.0 μh SMD-Power Inductors WE-PD Type M WE-PD, M,.0 μh WE-PD, M, 22.0 μh Order Code 7 728, Version 1.0 Order Code Description Qty. SMD-High Current Inductors WE-HC WE-HC, 0.2 μh WE-HC, 0.67 μh WE-HC, 1. μh WE-HC, 1.80 μh WE-HC, 2.70 μh SMD-Power Inductors WE-PD Type S WE-PD, Type S, 2.2 μh WE-PD, Type S, 3.3 μh WE-PD, Type S,.0 μh WE-PD, Type S, 1.0 μh WE-PD, Type S, 22.0 μh SMD-Power Inductors WE-PD Type L WE-PD, Type L, 2. μh WE-PD, Type L, 3.3 μh WE-PD, Type L,.7 μh WE-PD, Type L, 6.8 μh WE-PD, Type L,.0 μh WE-PD, Type L, 22.0 μh SMD-Power Inductors WE-PD Type XL WE-PD, Type XL, 3.3 μh WE-PD, Type XL,.7 μh WE-PD, Type XL,.6 μh WE-PD, Type XL, 6.8 μh WE-PD, Type XL,.0 μh WE-PD, Type XL, 22.0 μh WE-PD, Type XL, 33.0 μh WE-PD, Type XL, 7.0 μh WE-PD, Type XL, 68.0 μh WE-PD, Type XL, 0.0 μh Order Code 7 728, Version 1.0 Order Code Description Qty. SMD-Power Inductors WE-PD Type XL WE-PD, Type XL, 1.2 μh WE-PD, Type XL, 2. μh WE-PD, Type XL, 3. μh WE-PD, Type XL,.7 μh WE-PD, Type XL, 6.1 μh WE-PD, Type XL, 7.6 μh WE-PD, Type XL,.0 μh WE-PD, Type XL, 1.0 μh SMD-Power Inductors WE-PD Type L WE-PD, Type L,.0 μh LTspice LTspice software with the latest transformer simulation models
8 Design Kit for Power Inductors Fairchild Semiconductor Design Kit for Power Inductors STMicroelectronics Charakteristics Suitable for the converter family FAN of Fairchild Semiconductor Declaration of Fairchild part number Large spectrum of 7 different types, 3 values and 230 components Charakteristics Assortment of SMD Power Inductors With STMicroelectronics reference number to simplify the assignment Large spectrum of types and values 12 different types, 3 values and 226 components Suitable for converter IC s of Fairchild Semiconductors Suitable for switching power supplies of STMicroelectronics Order Code 7 729, Version 1.0 Order Code Description Qty. SMD-Power Inductors WE-TPC WE-TPC Type S.0 μh 0.6 A WE-TPC Type S.7 μh 1. A WE-TPC Type M.0 μh 1.30 A WE-TPC Type X.0 μh 1.30 A WE-TPC Type XL.0 μh 3.00 A SMD-Power Inductors WE-PD WE-PD Type XL 1.2 μh A WE-PD Type XL 2. μh. A WE-PD Type XL 3. μh 8.90 A WE-PD Type XL 6.1 μh 7.60 A WE-PD Type XXL 7.6 μh 7.0 A WE-PD Type XXL 1.0 μh A WE-PD Type XXL 2.2 μh 11.0 A WE-PD Type XXL.7 μh 9.30 A WE-PD Type XXL.0 μh 7. A WE-PD Type XXL 22.0 μh.30 A SMD-Power Inductors WE-PD WE-PD2 Type S 3.3 μh 2.00 A WE-PD2 Type L 1.0 μh 1.93 A WE-PD2 Type L 22.0 μh 1.73 A WE-PD2 Type L 27.0 μh 1.8 A WE-PD2 Type L 33.0 μh 1.3 A WE-PD2 Type L 7.0 μh 1.17 A Order Code 7 729, Version 1.0 Order Code Description Qty. SMD-Power Inductors WE-PD2 Type S WE-PD Type L 1.0 μh 7. A SMD-High Current Inductor WE-HC WE-HC 0.2 μh A WE-HC 0.39 μh 2.00 A WE-HC 0.7 μh A WE-HC 1. μh 2.00 A WE-HC 1. μh A WE-HC 0.67 μh 2.00 A WE-HC 2.0 μh.00 A SMD-High Current Inductor WE-HCF WE-HCF 0.7 μh A WE-HCF 0.80 μh 2.00 A WE-HCF 1.30 μh A WE-HCF.60 μh 7. A WE-HCF 6.0 μh 6.00 A WE-HCF 8. μh.0 A Order Code 7 727, Version 1.0 Order Code Description STMicro reference no. Qty. SMD-Power Inductors WE-PD Type M WE-PD Type M WE-PD Type M - SMD-Power Inductors WE-PD3 Type M WE-PD3 Type M L6902D WE-PD3 Type M L6902D SMD-Power Inductors WE-PD3 Type L WE-PD3 Type L L970D WE-PD3 Type L L970D WE-PD3 Type L L970D-L6902D SMD-Power Inductors WE-PD3 Type X WE-PD3 Type X L978 3 SMD-Power Inductors WE-PD Type L WE-PD Type L L973D-L973AD WE-PD Type L L973D-L973AD-L972D WE-PD Type L L973D-L973AD-L972D WE-PD Type L L971-L978-L972D WE-PD Type L L WE-PD Type L L971 SMD-Power Inductors WE-PD Type X WE-PD Type X L WE-PD Type X L973 3 SMD-High Current Inductors WE-HC WE-HC L699/7-L69/A WE-HC L699/ WE-HC L699/ WE-HC L699/7-L69/A Order Code 7 727, Version 1.0 Order Code Description STMicro reference no. Qty. SMD-High Current Inductors WE-HCF WE-HCF L699/7-L69/A WE-HCF L69/A WE-HCF L699/ WE-HCF L699/7 SMD-Power Inductors WE-TPC Type S WE-TPC Type S WE-TPC Type S WE-TPC Type S - SMD-Power Inductors WE-TPC Type M WE-TPC Type M L692/6D WE-TPC Type M L692/6D SMD-Power Inductors WE-TPC Type MH WE-TPC Type MH L69D WE-TPC Type MH L692/6D-L69D WE-TPC Type MH L692/6D-L69D SMD-Power Inductors WE-TPC Type LH 7 03 WE-TPC Type LH L692/6D-L69D WE-TPC Type LH L692/6D-L69D WE-TPC Type LH L69D
9 Design Kit for Simple Switcher LM xxx National Semiconductor Design Kit for Power Inductors Exar Assortment of SMD Power Inductors 6 different types, 3 values, 17 components clearly arranged in a sample case Assortment of SMD Power Inductors different types, 3 values, 17 components clearly arranged in a sample case Suitable for switching power supplies of National Semiconductor Suitable for switching power supplies of Exar Order Code 7 72, Version 2.0 (A) DCR (Ω) Qty SMD Power Inductor x 12.0 x WE-PD XXL SMD Power Inductor x 12.0 x WE-PD XL SMD Power Inductor x 12.0 x WE-PD L SMD Power Inductor WE-PD M 7.3 x 7.3 x with plastic base SMD Power Inductor x.0 x WE-TPC XLH SMD Power Inductor x 9.0 x WE-PD2 XL WEBENCH WEBENCH Power Designer with Würth Elektronik components Order Code 7 721, Version 1.0 (A) DCR (mω) Qty x 6.9 x x 6.9 x SMD-Flat Wire Inductor WE-HC x 6.9 x SMD Power Inductor WE-PD M with plastic base 7.3 x 7.3 x SMD Power Inductor WE-PD XL 12.0 x 12.0 x SMD-Flat Wire Inductor WE-HCA 13.2 x 12.8 x
10 Design Kit WE-MPS Design Kit of SMD-Common Mode Chokes Power Inductors WE-TPC and WE-PD series Recommended for Synchronous Buck Converter, Nonsynchronous Buck Converter, Boost Converter, White LED Driver: Serie MP1xx, MP21xx, MP23xx, MP30xx, MP32xx Low profile 2, 3 or -line configuration 7 different types, 3 values and 3 components USB CAN Firewire Data Lines Power Lines Order Code 7 722, Version 1.0 (A) DCR (Ω) Qty SMD Power Inductor x.80 x WE-TPC Type M SMD Power Inductor x.80 x WE-TPC Type L SMD Power Inductor x.80 x WE-TPC Type LH SMD Power Inductor x.0 x WE-TPC Type XL SMD Power Inductor x.0 x WE-TPC Type XLH SMD Power Inductor WE-PD Type S 7.30 x 3. x with plastic base SMD Power Inductor x.80 x WE-PD2 Type M Order Code 7 72, Version 1.0 Order Code Description Size Inductance (μh) Rated Current (ma) DCR max (Ω) Impedance (Ω) Qty SMD Common Mode Line Filter x 11.0 x WE-SL SMD Common Mode Line Filter 9. x 6.00 x WE-SL SMD Common Mode Line Filter x 3.60 x WE-SL SMD Common Mode Line Filter.0 x 8.70 x WE-SL SMD Common Mode Line Filter x 6.60 x WE-SL SMD Multilayer Common Mode Choke 2.00 x 1. x WE-CNSW Type SMD Multilayer Common Mode Choke 3. x 1.90 x WE-CNSW Type
11 Design Kit WE-PD Type XS/S Design Kit WE-PD Type M/L Design Kit WE-PD Type XL/XXL Design Kit WE-PD Type XS/S: Order Code 7 778, Version 1.0 (A) DCR (mω) Qty SMD Power Inductor.9 x 6.2 x WE-PD XS SMD Power Inductor 7.3 x 3.2 x WE-PD S Assortment with SMD Power Inductors Design Kit with 3 values and 17 components Design Kit WE-PD Type XS/S Assortment with SMD Power Inductors Design Kit with 3 values and 30 components Design Kit WE-PD Type M/L Assortment with SMD Power Inductors Design Kit with 3 values and 170 components Design Kit WE-PD Type M/L: Order Code 7 777, Version 1.0 (A) DCR (mω) Qty SMD Power Inductor 7.3 x. x WE-PD M SMD Power x 12.0 x Inductor WE-PD L Order Code 7 770, Version 1.0 (A) DCR (mω) Qty SMD Power Inductor x 12.0 x WE-PD XL SMD Power Inductor x 12.0 x WE-PD XXL
12 Design Kit for SEPIC applications and 1:1 SMD-Power Transformer WE-DD Design Kit WE-HC 7x7 Design Kit WE-HC/HCA x Design Kit of SMD-Power Transformers Large spectrum of types and values Perfectly suitable for your development department Design Kit WE-HC 7x7: Order Code 7 3, Version 1.0 (A) DCR (mω) Qty x 7.3 x x 7.3 x SMD High Current Inductor WE-HC x 6.9 x x 6.9 x Order Code 7 870, Version 1.1 (A) DCR (Ω) Qty SMD-Shielded Power Transformer x.0 x WE-DD Type S SMD-Shielded Power Transformer x.8 x WE-DD Type M SMD-Shielded Power Transformer x 12. x WE-DD Type L SMD-Shielded Power Transformer x 12. x WE-DD Type XL SMD-Shielded Power Transformer WE-DD Type XXL 12. x 12. x Design Kit WE-HC/WE-HCA x: Order Code 7 3, Version 2.0 (A) DCR (mω) Qty x.6 x SMD High Current Inductor WE-HC x.0 x SMD High Current Inductor x.2 x WE-HCA SMD High Current Inductor x.2 x WE-HC
13 Design Kit WE-HC/HCA 13x13 Design Kit WE-HCC Design Kit WE-TPC Small Size Design Kit WE-TPC Medium Size Design Kit WE-HC/WE-HCA 13x13: Order Code 7 36, Version 2.0 (A) DCR (mω) Qty SMD High x 12.8 x Current Inductor WE-HC x 12.8 x x 12.8 x SMD High Current x 12.8 x Inductor WE-HCA SMD High 1.0 x 12.8 x Current 1.0 x 12.8 x Inductor WE-HC 1.0 x 12.8 x SMD High Current x 12.8 x Inductor WE-HCA Design Kit WE-TPC Small Size: Order Code 7 028, Version 1.0 (A) DCR (Ω) Qty SMD Power Inductor 2.8 x 2.8 x WE-TPC SMD Power x 2.8 x Inductor WE-TPC SMD Power x 3. x Inductor WE-TPC SMD Power x 3.8 x Inductor WE-TPC SMD Power Inductor.8 x.8 x WE-TPC Design Kit WE-HCC: Order Code 7 332, Version 1.0 (A) DCR (mω) Qty x 11.0 x SMD-High Current Cube Inductor WE-HCC x.0 x x 8.0 x Design Kit of SMD Power Inductors Assortment with 3 values and 30 components Design Kit WE-TPC Medium Size: Order Code 7 03, Version 1.0 (A) DCR (Ω) Qty SMD Power Inductor.8 x.8 x WE-TPC SMD Power Inductor.8 x.8 x WE-TPC SMD Power Inductor.8 x.8 x WE-TPC
14 Design Kit WE-TPC Large Size Design Kit WE-TPC 8012/801/80 Design Kit WE-CMB & WE-CMB NiZn Design Kit WE-FC Design Kit WE-TPC Large Size: Order Code 7 062, Version 1.0 Design Kit WE-CMB & WE-CMB NiZn: Order Code 7 8, Version 1.0 (A) DCR (Ω) Qty SMD Power Inductor 6.8 x 6.8 x WE-TPC SMD Power Inductor.0 x.0 x WE-TPC SMD Power Inductor.0 x.0 x WE-TPC Order Code Description Size Inductance (μh) Common Mode Power Line Choke 16.0 x 7. x.0 WE-CMB NiZn Rated Current (A) DCR (mω) Common Mode Power Line Choke 1.0 x 7. x WE-CMB Type XS Common Mode Power Line Choke WE-CMB Type S 17. x 13.0 x Common Mode Power Line Choke 23.0 x 17.0 x WE-CMB Type M Common Mode Power Line Choke 27. x 18. x WE-CMB Type L Common Mode Power Line Choke 30.0 x 21.0 x WE-CMB Type XL Nominal Voltage (V AC ) Qty WE-TPC Large Size Design Kit of SMD Power Inductors Assortment with 3 values and 17 components WE-TPC 8012/801/80 Design Kit of SMD Power Inductors Assortment with 3 different types, 3 values and 30 components Design Kit WE-TPC 8012/801/80: Order Code 7 070, Version 1.0 (A) DCR (Ω) Qty SMD Power Inductor 8.0 x 8.0 x WE-TPC SMD Power Inductor 8.0 x 8.0 x WE-TPC SMD Power Inductor 8.0 x 8.0 x WE-TPC Design Kit WE-FC Sample Kit with Current Compensated Power Line Chokes 1 values and 60 components Design Kit WE-FC: Order Code 7 86, Version 1.0 Order Code Description Type L (mh) Rated Current (A) DCR typ. (Ω) UN (V) Qty UT Current Compensated Power Line Choke WE-FC ET
15 Design Kit WE-MK 01 Design Kit WE-MK 002 & WE-MK 0603 Design Kit WE-KI 002 A Design Kit WE-KI 0603 C Design Kit WE MK 01: Order Code 7 78, Version 1.0 Order Code Description Inductance (nh) DCR (Ω) Rated Current (ma) Qty SMD-Inductors WE-MK Design Kit WE MK 002: Order Code 7 781, Version 1.0 Order Code Description Inductance (nh) DCR (Ω) Rated Current (ma) Qty SMD-Inductors WE-MK Design Kit WE KI 002 A: Order Code 7 76 A, Version 1.0 Order Code Description Inductance (μh) DCR (Ω) Rated Current (ma) Qty A A A A A A A A A A A A A A A A A A A A A Ceramic SMD-Inductor A WE-KI 002 A A A A A A A A A A A A A A A A A A A A A To achieve the best result from this kit, we would advise you to also order the design guide Trilogy of Magnetics (Order Code 7 006) Design Kit WE MK 0603: Order Code 7 782, Version 1.0 Order Code Description Inductance (nh) DCR (Ω) Rated Current (ma) Qty SMD-Inductors WE-MK To achieve the best result from this kit, we would advise you to also order the design guide Trilogy of Magnetics (Order Code 7 006) Design Kit WE KI 0603 C: Order Code C, Version 1.0 Order Code Description Inductance (μh) DCR (Ω) Rated Current (ma) Qty C C C C C C C C C C C C C C C Ceramic SMD-Inductor C WE-KI 0603 C C C C C C C C C C C C C C C
16 Design Kit WE-KI 080 C Design Kit WE-KI 08 A Design Kit WE-RFI Design Kit WE-TCI Design Kit WE-KI 080 C: Order Code 7 760C, Version 1.0 Order Code Description Inductance (nh) DCR (Ω) Rated Current (ma) Qty C C C C C C C C C C C C C C C C Ceramic SMD-Inductor C WE-KI 080 C C C C C C C C C C C C C C C C Design Kit WE-RFI: Order Code A/RFI, Version 1.0 Order Code Description Inductance (μh) DCR (Ω) Rated Current (ma) Qty A A A A A A A A A A A A A A A A A SMD-Inductors A WE-RFI A A A A A A A A A A A A A A A A To achieve the best result from this kit, we would advise you to also order the design guide Trilogy of Magnetics (Order Code 7 006) Design Kit WE-KI 08 A: Order Code A, Version 1.0 Order Code Description Inductance (nh) DCR (Ω) Rated Current (ma) Qty A A A A A A A A A A A A A A A Ceramic SMD-Inductor A WE-KI 08 A A A A A A A A A A A A A A A To achieve the best result from this kit, we would advise you to also order the design guide Trilogy of Magnetics (Order Code 7 006) Design Kit WE-TCI: Order Code 7 901, Version 1.0 Order Code Description Size Inductance (nh) Rated Current (ma) DCR max (Ω) Qty SMD- 1.0 x 0. x Thinfilm Inductor WE-TCI x 0. x SMD Thinfilm x 0.8 x Inductor WE-TCI
17 Design Kit for WLAN Gasketing To achieve the best result from this kit, we would advise you to also order the design guide Trilogy of Magnetics (Order Code 7 006) Order Code 78 20, Version 1.0 Order Code Description Frequeny Range (MHz) Impedance Z (Ω) Peak Gain (XZ-V) (dbi) typ. Average Gain (XZ-V) (dbi) max. VSWR Qty. Multilayer Chip Antenna WE-MCA, 9.x WE-MCA, 7.6x WE-MCA, 3.2x WE-MCA, 7.0x SMD-Multilayer Dual-Band Chip Antenna 8.x1.6x / / / /2.2 Multilayer Chip Balun WE-BAL WE-BAL WE-BAL Multilayer Chip Band Pass Filter WE-BPF WE-BPF Multilayer SMD Band Pass Filter with Balun WE- BPFB Order Code Description Inductance (nh) DCR (Ω) Rated Current (ma) Qty. SMD Multilayer Ceramic Inductor WE-MK WE-MK WE-MK
18 Design Kit Transformer for DC/DC-Converter WE-FLEX Design Kit Power over Ethernet Transformer Transformers with 6 windings sizes with different lengths of air gap each Isolation voltage 00 V DC Low leakage inductance Operating temperature: -0 C to +12 C By using different circuits more than 300 transformer solutions and about 0 choke solutions possible. Consequently, quick prototyping possibilities. WE-PoE transformer WE-LAN transformer Power over Ethernet PDs Suitable for PoE ICs like LTC267, TPS 2370, TPS 23770, LM070, LM071, LM072 etc. All kinds of switching regulators: - Flyback converters - Forward converters - Push-pull converters - Step-up/step-down converters - SEPIC converter Order Code , Version 1.0 Order Code Type L base (μh) Rated Current base (A) I sat Base (A) Qty ER 11/ ER 1./ EFD EFD Includes design guide for the calculation and design of flyback converters! Order Code , Version 1.0 Order Code Type Output range (W) Output voltage (V) Primary Inductance (μh) Leakage Inductance (μh) ER 11/ ER 1./ // EFD // Order Code Type Size IL RL DCMRR Qty BaseT x.97 x 9.0 PoE single port 1 80 MHz/ 1 0 MHz/ 3 db to 33 db MHz/ 16 db to db x 7.11 x db max. 1 0 MHz/ 0 db to 3 db BaseT 13.6 x 6.22 x PoE dual port 1 0 MHz/ x.60 x db max MHz/ 1 0 MHz/ 3 db to 33 db 16 db to 12 db BaseT 1 0 MHz/ x 7.2 x 1.2 PoE quad port 1.1 db max. Qty. Includes design guide for the calculation and design of flyback converters!
19 Design Kit for Power Transformers -1 W Design Kit for Power Transformers 1-30 W Design kit with cores bobbins, wire and core tape Design kit with cores bobbins, wire and core tape Customer-specific flyback transformers for Power & Telecom Transformers Customer-specific flyback transformers for Power & Telecom Transformers Order Code 70 2, Version 1.0 Cores Cores Core details Qty. ER11 ungapped 8 AL = 190nH 2 AL = 2nH 2 AL = 76nH 2 AL = 9nH 2 ER1. ungapped 8 AL = 216nH 2 AL = 116nH 2 AL = 83nH 2 AL = 66nH 2 EFD1 ungapped 8 AL = 136nH 2 AL = 8nH 2 AL = nh 2 AL = 7nH 2 EE13 ungapped Bobbins Bobbins Bobbins details Qty. ER11 ER1. 12 Pins SMD EFD1 3 EFD1 3 8 Pins THT EE13 Wire size Diameter (mm) Diameter (AWG) Includes design guide for the calculation and design of flyback converters! Order Code 70 1, Version 1.0 Cores Cores Core details Qty. ungapped 8 AL = 1nH 2 EFD AL = 83nH 2 AL = 67nH 2 AL = 3nH 2 EE16 ungapped EE ungapped EE2 ungapped Bobbins Bobbins Bobbins details Qty. EFD 8 Pins THT 3 EFD 12 Pins SMD 3 EE16 8 Pins THT EE Pins THT EE2 Pins THT Vertical Wire size Diameter (mm) Diameter (AWG) Includes design guide for the calculation and design of flyback converters!
20 Design Kit Disk Varistors WE-VD Design Kit SMD Varistors WE-VS Fast response time Low leakage current Low clamping voltage Almost no energy consumption in stand-by mode After a surge impulse the varistor works immediately in normal mode so there is no slip current Excellent absorption at surge impulses Operating temperature: -0 ºC to +8 ºC for types up to 9 V RMS -0 ºC to +12 ºC for types from 11 V RMS Response time < 2 ns Fast response time Low leakage current Low clamping voltage Almost no energy consumption in stand-by mode After a surge impulse the varistors works immediately in normal mode so there is no slip current Excellent absorption Operating temperature: -0 C to +8 C for the sizes 002 to C to +12 C for the sizes 16 to 22 Nickel barrier UL, CSA and VDE certified UL: File E2196 CSA: File 2286 VDE: File and V DC distribution 1-00 V power supply Leakage of voltage peaks Surge protection in accordance with EN Order Code 8 999, Version 1.0 Order Code Typ. Application Max. Operating Voltage Rated Currentbase (A) Qty. VRMS (V) VDC (V) Diameter mm V DC V DC PS 1 V Diameter 7 mm PS 1 V PS 230 V PS 60 V Diameter mm PS 1 V PS 230 V PS 60 V Diameter 1 mm PS 1 V PS 230 V PS 60 V Diameter mm PS 1 V PS 230 V PS 60 V High-Surge Types Protection of power supply Protection of bus systems and communication lines Limiting of overvoltages Surge protection in accordance with EN and ESD protection in accordance with EN Order Code , Version 1.0 Order Code Typ. Application Max. Operating Voltage Rated Currentbase (A) Ctyp (pf) Qty. VRMS (V) VDC (V) Size V DC V DC V DC Size V DC V DC V DC /1 V DC V DC Size V DC V DC /1 V DC V DC V DC Size V DC V DC /1 V DC V DC V DC V DC V DC Size /1 V DC V DC V DC Size /1 V DC V DC Size V DC V DC High-Surge Types
21 Design Kit ESD Suppressor Small size Low clamping voltage Fast response time Bidirectional protection Low leakage current ESD protection > 8 kv at contact discharge mode High reliability Würth Elektronik differs from all other component manufacturers in several aspects: We guarantee catalogue products in stock and our technical sales force can support your designs with market experience. Keypads LCD Moduls RS-232/RS-8 USB 1.0 to 2.0 LAN MBit to GBit CAN DVI/HDMI Order Code , Version 1.0 Order Code C (pf) VDC (V) Size Qty. ESD Suppressor ESD Suppressor Arrays We guarantee all catalogue products in stock Samples and small quantities Samples free of charge and orders below MOQ. Design Kits With lifelong free refill. Trilogy of Magnetics Application and design guide for EMI filter design, SMPS & RF circuits Reference Designs of the IC-manufacturers Reference reference designs with all leading IC manufacturers: National Semiconductor, Linear Technology, Cologne Chip, Texas Instruments, Fairchild Semiconductor, ON Semiconductor, STMicroelectron ics, MPS, Maxim, Semtech, Diodes, Exar and Analogic Tech Speedy Design Service The worldwide fastest sample service for customized Transformers. Worldwide Technical Sales Force Customer Specific Solutions 2 h Hotline With this hotline we are available around the clock worldwide and answer your questions within 2 hours eisos-hotline@we-online.com EMC lab search engine Get quick access to the EMC test lab you are looking for
22 EMC & Inductive Solutions EMC Components Inductors Transformers RF Components Circuit Protection EMC Shielding Material & D-Sub Filter Connectors Connectors Switches Assembly Technique DIE NECKARPRINZEN SIL
Magnetics Short Form Catalog Electronics Division
Magnetics Short Form Catalog Electronics Division Eaton Electronics Product Selection Tools PARAMETRIC SEARCH Drill down into the Eaton Electronics product database to find the right part for your application.
More informationCONTENT Ferrites for cable assembly
www.schmid-m.com EMC & Inductors CONTENT Ferrites for cable assembly Round cable snap ferrites SMLF Flat Ferrite with Clip SRPS Flat Ferrite Cores SRP Toroidal Cores ST Axial Ferrite Beads SRH Ferrite
More informationFor this application note the Ag9700-S will be used as an example of one of our typical PD products.
This application note looks at Electromagnetic Interference (EMI) in Power over Ethernet (PoE) applications with regards to the Powered Device (PD). It will offer some suggestions on improvements that
More informationMagnetic Products. Inductors Pulse Transformers Current Sensing Transformers Databus Isolators Common-Mode Chokes.
Magnetic Products Inductors Pulse Transformers Sensing Transformers Databus Isolators Common-Mode Chokes Magnetic Products Two essential elements of the vast majority of power electronics applications
More informationFor this application note the Ag9400-S will be used as an example of one of our typical PD products.
This application note looks at Electromagnetic Interference (EMI) in Power over Ethernet (PoE) applications with regards to the Powered Device (PD). It will offer some suggestions on improvements that
More informationDESIGN KIT Low Power Point of Load Solutions
Efficiency up to 97% DESIGN KIT Low Power Point of Load Solutions 600 ma to 1.5 A, Low Single and Dual Channel Converter Order Code IC-744 721 XRPWRKIT-LWP-1 Version 1.0 Exar Device Max. Output Current
More informationModel Number Structure
Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved
More informationFerrite Cores. Short Form Catalog
Ferrite Cores Short Form Catalog Index Introduction...2 Materials...3 Toroids...4 E, I Cores...14 EFD Cores...18 ETD Cores...20 EER Cores...22 EC Cores...24 U, I, UR Cores...26 Planar E, I Cores...28
More informationPower Inductors - RFB Series
Document 277-1 Power Inductors - RFB Series These low cost power inductors offer a wide range of inductance values, from 2.2 µh to 18 mh. They have an open magnetic construction that gives them high current
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLN Series. MLN SurgeArray TM Suppressor. Description
MLN SurgeArray TM Suppressor RoHS Description The MLN SurgeArray Suppressor is designed to help protect components from transient voltages that exist at the circuit board level. This device provides four
More informationIntroduction fo FPV Series Multilayer Chip Varistor
Introduction fo FPV Series Multilayer Chip Multilayer Chip s (MLV) are Transient Voltage Suppressors (TVS) which manufactured from semiconducting ceramics by the highly advanced multilayer formation technologies,
More informationOutput Current Input Current Reflected Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S033
DC/DC High Efficiency Regulated Output W Minmax MKW Series FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency
More informationRP40- _FR/ Package (4) CTRL Logic (3)
Features Regulated Converters Description Wide 4:1 Input Voltage Range 1.6kVDC Isolation for 24Vin and 48Vin, 3kVDC Isolation for 1Vin Efficiency up to 92% Six-Sided Continuous Shield UL695-1 AM2 Certified,
More informationMTU1 Series Isolated 1W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU1 Series SELECTION GUIDE FEATURES Patent Protected UL60950 recognised Footprint over pins 0.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 88% (Typ.)
More informationChamps Technologies. About Us. Champs Technologies. Formation Factory Location: Taiwan (Main Plant) ISO Certification.
About Us Champs Technologies Formation 1992 Factory Location: Taiwan (Main Plant) ISO9001-2008 Certification UL File #251699 RoHS Compliant Capabilities Design & Manufacture Planar Transformers & Inductors.
More informationP7609 Family POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET POWER INDUCTOR P7609 Family Features Current to 3.8A Low DCR (to 30mΩ) Low profile (to 2.2mm) Surface Mount Flat top for pick & place Electroplated terminals Applications DC-DC Converters
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationSurface Mount Multilayer Varistors
ESD Protection (ES) Series Fast Response < 0.5 ns Low Working 5 V Low Capacitance Low Leakage Current < 1 μa Low Application Fields: Cell Phones Digital Cameras PDAs MP3 Notebooks Working (Max) (Max) Leakage
More informationVDC VDC ma ma ma(typ.) ma(typ.) ma (typ.) VDC μf % MKW40-12S
MKW SERIES DC/DC CONVERTER W, Highest Power Density FEATURES Smallest Encapsulated W Ultra-compact 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage Excellent Efficiency up to
More informationNXE2 Series Isolated 2W Single Output SM DC-DC Converters
SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationOutdoor 200 W 2 Channel SL-L2701B0N1KR
Product Data Sheet Rev. 1.0 2017.09.07 1# LED Driver Outdoor 200 W 2 Channel SL-L2701B0N1KR High Efficiency Constant Current LED Driver With Active Power Factor Correction Features & Benefits Output Current:
More informationFeatures. Regulated Converters. RP20-F 20 Watt 2 x 1 Single & Dual Output. RP20- _F/ Package 4) Control Logic (3) DC/DC Converter
Features Regulated Converters Description 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 89% Six-Sided Continuous Shield No Minimum Load The series / converters are certified
More informationS24SP series 40W Single Output DC/DC Converter
4W Single Output DC/DC Converter FEATURES Efficiency up to 92.8% Wide input range, 9V-36V Package with Industry Standard Pinout Package Dimension: Without heat sink 5.8 x25.4 x1.2mm (2. x1. x.4 ) With
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint
More informationMultilayer Suppressors and Inductors. Technical Note
Multilayer Suppressors and Inductors Technical Note A Y A G E O C O M P A N Y Multilayer Suppressors and Inductors Contents Introduction 3 Multilayer Suppressors Features 4 Applications 5 Type Number structure
More informationLow-Profile, Shielded Drum Core, Tapped Inductor SDT30 Series
Low-Profile, Shielded Drum Core, Tapped Inductor SDT0 Series SMD Device Description Halogen Free Approved for use with Maxim MAX45 chip set 5 C maximum total temperature operation. x. x.0mm shielded drum
More informationMTU2 Series Isolated 2W Single & Dual Output SM DC/DC Converters
www.murata-ps.com MTU2 Series SELECTION GUIDE FEATURES Patent Protected UL 9 Recognised Footprint over pins.69cm 2 Single & dual isolated output 1kVDC Isolation Hi Pot Test Efficiency up to 85% (Typ.)
More informationNCS12 Series Isolated 12W 4:1 Input Single & Dual Output DC/DC Converters
NCS1 Series Isolated 1W :1 Input Single & Dual Output DC/DC Converters FEATURES UL 95 recognition pending :1 Wide range voltage input Operating temperature range - C to 5 C Typical load regulation from.5%
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 90% Six-Sided Continuous Shield Available as Power Module (RPM30-E)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to % Six-Sided Continuous Shield Available as Power Module (RPM30-E) Description The series / converters
More informationMetal-Oxide Varistors (MOVs) Surface Mount Multilayer Varistors (MLVs) > MLA Automotive Series
MLA Automotive Varistor Series RoHS Description The MLA Automotive Series of transient voltage surge suppression devices is based on the Littelfuse Multilayer fabrication technology. These components are
More informationvaristor plus catalog
varistor plus catalog Single Layer Varistor Technology Surface Mount & Leaded Products SEI electronics inc. P.O.Box 58789 Raleigh,NC 27658-8789 Tel. 1-888-sei-sei-sei Fax. 919-850-9504 www.seielect.com
More information(typ.) (Range) Load
FEATURES Highest Power Density 1" x 1" x 0.4" Shielded Metal Package Wide 2:1 Input Range Excellent Efficiency up to % Operating Temp. Range - C to + C Optional Heatsink I/O-isolation Voltage 10VDC Remote
More informationNXJ2 Series Isolated 2W Single Output SM DC-DC Converters
NXJ2 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL69 Recognition pending ANSI/AAMI ES661-1, 2 MOOP, 1MOPP recognition pending 5.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer
More informationEMC, FILTERS & SUPPRESSION
EMC, FILTERS SUPPRESSION A comprehensive range of voltage dependent, metal oxide semiconductor devices (varistors) designed to protect equipment against transient voltage spikes. Connected directly across
More informationSELECTION GUIDE. Nominal Input Voltage. Voltage. Output. Reflected ripple current. Case Temperature rise above ambient ABSOLUTE MAXIMUM RATINGS
MEE3 Series SELECTION GUIDE FEATURES UL 695 recognized RoHS compliant Typical efficiency from 83% Power density 2.68W/cm 3 Wide temperature performance at full 3 Watt load, 4 C to 85 C 3 UL 94V- package
More informationPower Inductors RFB Series
Document 277-1 Power Inductors RFB Series Low cost, high current power inductors 2.2 µh to 18 mh inductance range 500 V isolation from winding to core. RFB0810 and RFB1010 have a flame retardant polyolefin
More informationINDUCTORS SMD POWER INDUCTORS SMD
INDUCTORS, COIS, FITERS & FERRITES INDUCTORS SMD POWER INDUCTORS SMD K AND CK SERIES STANDARD MUTIAYER INDUCTORS Features: Internal printed coil structure that creates a closed magnetic circuit which acts
More informationFeatures. Continuous AUML Series Units. ) 1.5 to 25 J Jump Start Capability (5 minutes), (V JUMP. ) 48 V Operating Ambient Temperature Range (T A
AUML Varistor Series RoHS Description The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most
More information4:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW)
Features Regulated Converters Description 4:1 Wide Input Voltage Range 1.6kV Isolation UL Certified Efficiency up to 88% Six-Sided Continuous Shield Available as Power Module (RPM30-EW) The series wide
More informationPower Inductor. Non-shielded. PDH Series 2. PD Series 4. PCD Series 7. Packaging Info 10 Environmental Specifications 12
Power Inductor Non-shielded PDH Series 2 PD Series 4 PCD Series 7 Packaging Info 10 Environmental Specifications 12 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com http://www.seielect.com
More informationAutomotive EMI Demystified: Part 2 Pursuing an Ideal Power Supply Layout
Automotive EMI Demystified: Part 2 Pursuing an Ideal Power Supply Layout Jens Hedrich Senior FAE, Central Europe December 2018 Jens Hedrich Senior FAE, Central Europe 2010 Present MPS Senior FAE since
More informationModel Number Structure
Solid State Relays CSM DS_E_2_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible
More informationNXE1 Series Isolated 1W Single Output SM DC-DC Converters
NXE1 Series SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise
More informationDesigns available to match a variety of PWM control IC s. Designs meet UL/CSA/TUV/VDE Safety Standards.
Information shown uses standard parts. Modified or special designs are available. S.M.P.S Transformers Designs available to match a variety of PWM control IC s. Designs meet UL/CSA/TUV/VDE Safety Standards.
More informationAUML Varistor Series. Surface Mount Varistors
The AUML Series of Multilayer Transient Surge Suppressors was specifically designed to suppress the destructive transient voltages found in an automobile. The most common transient condition results from
More informationSMD POWER INDUCTORS SELECTION GUIDE
SMD POWER INDUCTORS SELECTION GUIDE Unshielded Inductor Type Item Type Dimension (mm) Inductance (uh) Isat (A) Lead Free P/N. DA SERIES DA42 4.0 4.5 3.0 1.0 ~ 68 0.30 ~ 2.18 DA42NP DA43 4.0 4.5 3.5 1.0
More informationChip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Thin Film Chip Inductor A 3 Thin Film Common Mode Filter CMF 10 Multilayer Multilayer Chip Inductor C 14 Multilayer Ferrite Chip Inductor M 20 Multilayer
More informationSELECTION GUIDE - SINGLE OUTPUT 1. Nominal Input Voltage Output Voltage
www.murata-ps.com SELECTION GUIDE - SINGLE OUTPUT 1 Order Code Nominal Input Voltage Output Voltage Output Current Input Current at Rated Load Load Regulation (Typ) Load Regulation (Max) Ripple & Noise
More informationZV/ZVY Series Low Voltage SMD Varistors
Description: The ZV Series of low voltage varistors is designed to protect sensitive electronics devices against high voltage surges in the low voltage region. They offer excellent transient energy absorption
More informationP7604 Family SHIELDED POWER INDUCTOR PRODUCT DATA SHEET
PRODUCT DATA SHEET SHIELDED POWER INDUCTOR P7604 Family Features Magnetic Shielding High Current (to 5A) Low DCR (to 20mΩ) Low profile (3-7mm) Surface Mount Flat top for pick & place Pb-free Applications
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input reflected ripple current. Switching frequency NXE1S0305MC 85
SELECTION GUIDE Order Code 1 Nominal Input Voltage Output Voltage Input Current Output Current Load Regulation (Typ) Load Regulation (Max) Output Ripple & Noise (Typ) Output Ripple & Noise (Max) Efficiency
More informationSELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognition pending ANSI/AAMI ES1-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationDatasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No:
Datasheet RS Pro AL Series Wire-wound SMD Inductor with a Ceramic Core, 4.7 nh ±0.1nH Wire-Wound 320mA Idc Q:13 RS Stock No: 763-1434 Product Details RS Pro SMD inductor offers an inductance of 4.7 nh
More informationPower Inductor. Shielded. PS Series 2. PCS Series 4. PCDR Series 7. PCDS Series. SCDS Series 12. Packaging Info 14. Environmental Specifications
Power Inductor Shielded PS Series 2 PCS Series 4 PCDR Series 7 PCDS Series 10 SCDS Series 12 Packaging Info 14 Environmental Specifications 16 Tel: 1-888-734-7347 Fax: 919-850-9504 E-mail marketing@seielect.com
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More informationCMR Series Isolated 0.75W Single and Dual Output Isolated DC/DC Converters
www.murata-ps.com CMR Series SELECTION GUIDE FEATURES Short circuit protection options UL 60950 recognised Single or Dual Isolated Outputs 1kVDC or 3kVDC options Hi Pot Test Wide temperature performance
More informationSPHV-C Series 200W Discrete Bidirectional TVS Diode
SPHV-C Series W Discrete Bidirectional TVS Diode RoHS Pb GREEN Description The SPHV-C series is designed to replace multilayer varistors (MLVs) in portable applications, LED lighting modules, and low speed
More informationMulti-Layer Power Inductors (IP_L Series)
Multi-Layer Power Inductors (IP_L Series) For Choke Application ORDERING CODE IP 2012 2R2 M P L 9 PRODUCT CODE IP : Multilayer Power Inductor (Lead Free) DIMENSION (L X W) Code Dimension EIA 1608 1.6 x
More informationGlass Encapsulated SMD Varistor MLV
(VJ12, 2, 13, 14, 15, 32) Transient Voltage Suppression, ESD Protection Devices & EMI Devices GENERAL DESCRIPTION AVX s Professional Multilayer Varistors include 3 series of glass coated products as listed
More informationProduct Focus. Automotive Components
Product Focus Automotive Components Automotive Component Applications Comfort & Positioning Window Lifts, Seat Positioning Bourns Value Proposition AEC-Q200 qualification PPTC, inductors, resistors & MLVs
More informationFlat Coil Inductor Catalog. Electronics Division 2015 A0
Flat Coil Inductor Catalog Electronics Division 2015 A0 Index Mentech flat coil inductor provide exceptionally low and higher rated current.applications in telcom switches and routers,server,dc-dc converters,
More informationWE Standard: WES_FIT - Reliability Data
WE Standard: Date of Issue: 2018-07-11 Actual Revision: 1.18 Issued by: Christin Otto FIT - Reliability Data page 1 of 30 Table of Content 1 Document Control... 2 2 General Information... 3 3 Determination
More information(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
More informationRM 6 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 220 Matching handle B63399 220 Adjusting screw B65659 220 Core B65807 212 Clamps B65808 217 Insulating
More informationNote1: tested at nominal Vin, full load and at +25 C ambient. Package (3) CTRL Logic (2)
Features Regulated Converters : Wide input voltage range.6kvdc Isolation UL, IEC/EN69 and EN certified Efficiency up to 88% OVP, OCP & OTP + C max. case temperature Description The RPA-AW series are high
More informationNXJ1 Series Isolated 1W Single Output SM DC-DC Converters
SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES-, 2 MOOP, MOPP Recognised 4.2kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry
More informationChip Inductor. Power Inductor
Chip Inductor Type Style Features Series Page Thin Film Multilayer Thin Film Chip Inductor A 3 Multilayer Chip Inductor C 8 Multilayer Ferrite Chip Inductor M 13 Multilayer Chip Bead CB 19 Wire Wound Wire
More informationShielded SMD Power Inductor
PCDR 0728 / 0730 / 0732 / 0745 / 1045 PCDR 0628 / 1255 / 1265 / 1275 Features Dimensions Unit:mm -Compact, low profile with low DCR and large current -With magnetically shielded against radiation -Flat
More information(TRWL) Wire Wound Chip Ceramic Inductor
Version: April 12, 2018 (TRWL) Wire Wound Chip Ceramic Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District,
More information48V/12V DC/DC Converter
48V/12V DC/DC Converter Table of Contents 12V output, EMI Filter...3 12V output, reverse polarity protection...4 12V output, security switch... 5 12V output, transient protection... 6 48V input, EMI Filter...
More informationMultilayer Chip Inductor-CL Series
Multilayer Chip Inductor-CL Series Construction A L 5 4 T 1 3 2 W 1 Ceramic Material 3 Inner Electrode (Ag) 5 Direction Mark 2 Through Hole 4 End-termination (Ag/Ni/Sn) Features -A ceramic material construction
More information(typ.) (Range) ±18 330# 89 MPW MPW
DC/DC 30W, Single & Dual Output FEATURES 2 x 1.6 x 0.4 Metal Package Ultra-wide 4:1 Input Range Operating Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN
More informationDesign of DC/DC Converters for 42V Automotive Applications
Design of DC/DC Converters for 42V Automotive Applications J. Mark Christini, PE Senior Application Engineer, Electromechanical Products Ansoft Corporation Pittsburgh, PA Outline Introducing the application:
More informationUL Certified RP30-FW
Features 4:1 Wide Input Voltage Range 30 Watts Output Power 1.kVDC Isolation UL Certified Fixed Operating Frequency Six-Sided Continuous Shield Standard 50.8 x25.4x10.2mm Package Efficiency to 91% POWERLINE
More informationOutput Voltage Current. Input Current Ripple. Efficiency (typ.) Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.) μf % 2.
FEATURES Industrial Standard 2" X 1" Package Wide 2:1 Input Voltage Range Fully Regulated Output Voltage High Efficiency up to 88% I/O Isolation 1500 VDC Operating Ambient Temp. Range -40 to 85 Overload
More informationMJWI20 SERIES FEATURES PRODUCT OVERVIEW. DC/DC Converter 20W, Highest Power Density MINMAX MJWI20 Series
DC/DC 2W, Highest Power Density MINMAX MJWI2 Series MJWI2 SERIES DC/DC CONVERTER 2W, Highest Power Density FEATURES Smallest Encapsulated 2W! Package Size 1. x1. x.4 Ultra-wide 4:1 Input Range Very high
More informationModel Number Structure
Solid State Relays Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking
More informationMEE1 Series Isolated 1W Single Output DC/DC Converters
www.murata-ps.com MEE1 Series FEATURES UL69 recognised Operation to zero load Single isolated output 1kVDC isolation Hi Pot Test Efficiency up to 87% typical Wide temperature performance at full 1 watt
More informationAV / AVY Series Automotive SMD Varistor
Description: Almost all electronic systems in internal-combustion powered vehicles, e.g., anti-lock brakes, direct ignition, airbag control, wiper motors, etc. are susceptible to damage from destructive
More informationIndoor Linear 50W Driver SI-CU WW
Product Data Sheet Rev.2.0 2016. 5. 27 1# LED Driver Indoor Linear 50W Driver SI-CU1425001WW Constant Current LED Driver Features & Benefits Output Current Range: 500~1400 ma (adjustable via R-set) Output
More informationMulti Point Station Series
Multi Point Station Series Dual Band 2x2 MIMO 802.11ac/b/g/n Long Range Outdoor Access Point 560MHz CPU / 300Mbps / 867Mbps Model: MPS344 KEY FEATURES Qualcomm Atheros 560MHz Processor AR9344 IEEE 802.11ac/a/b/g/n
More informationLow Profile DC Power Supply with Zero Voltage Soft Switching
Sorensen XFR Series Low Profile DC Power Supply with Zero Voltage Soft Switching Analog programming Zero voltage soft switching Constant voltage or constant current operation with automatic crossover and
More informationProduct Catalog. Berkeley Magnetics, Inc 1836 Stone Avenue San Jose, CA Phone Fax
Product Catalog Company Berkeley Magnetics Inc. was founded in 1985 and headquartered in San Jose, California to serve the electronic industry that saw rapid development of application of magnetic components.
More informationEfficiency (typ.) (Range) Output Voltage Current. Input Current Load VDC VDC ma ma ma(typ.) ma(typ.) ma(typ.
FEATURES 2"x 1"x 0.4" Metal Package Wide 2:1 Input Range High Efficiency up to % Operating Ambient Temp. Range 40 C to 80 C Short Circuit Protection I/O-isolation 1500 VDC Input Filter meets EN 55022,class
More information2R2. Design Code Design Code M ±20%
Wire Wound SMD Power Inductors WPN Series Operating Temp. : -40 ~+125 (Including self-heating) FEATURES Fe base metal material core provides large saturation current Metallization on ferrite core results
More information2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM60-G)
Features Regulated Converters 2:1 Wide Input Voltage Range 1.6kVDC Isolation UL Certified Efficiency up to 91% Six-Sided Continuous Shield Available as Power Module (RPM-G) Description The series DC/DC
More informationRM 5 Core and Accessories
Core and Accessories Individual parts Part no. Page Adjusting screwdriver (for assembly only) B63399 204 Matching handle B63399 204 Adjusting screw B65539 B65806 204 Core B65805 98 Clamps B65806 20 Insulating
More informationNXE1 Series Isolated 1W Single Output SM DC/DC Converters
NXE1 Series SELECTION GUIDE FEATURES Patents pending Lower Profile UL695 Recognition pending ANSI/AAMI ES661-1 Recognition pending 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture
More informationFP1008R5 and FP1008R6 High frequency, high current power inductors
Technical Data 152 Effective April 217 FP18R5 and FP18R6 High frequency, high current power inductors Applications Multi-phase and Vcore regulators Voltage Regulator Modules (VRMs) and high power density
More informationOutput Current Input Current Reflected Ripple. VDC VDC ma ma(typ.) ma(typ.) ma(typ.) VDC μf %
FEATURES Industrial Standard Quarter Brick Package Wide Input Range 43-101VDC & 66-1VDC Excellent Efficiency up to 92% I/O Isolation 3000VAC with Reinforced Insulation Operating Ambient Temp. Range - C
More information1 second start up, no external components 220µF <1 second start up + diode protection circuit 6800µF
Features Switching Regulator Description Efficiency up tpo 94%, no need for heatsinks Pin-out compatible with LM78XX linears Low profile (L/W/H=11.5 x 7.5 x 1.2mm) Wide input range Short circuit protection,
More informationPower Inductors (IP Series)
Multi-Layer Power Inductors (IP Series) ORDERING CODE... 1 Standard External Dimensions... 2 Power Inductor for Choke (L Type)... 3 Power Inductor for DC/DC converter (S Type)... 4 Testing Condition &
More informationPower Supplies POWER SUPPLIES TRANSIENT VOLTAGE SUPPRESSORS POWER LINE FILTERS. AC to DC Power Supply Units. AC to 24VDC Regulated Primary Switching
Power Supplies AC to DC Power Supply Units AC to 24VDC Regulated Primary Switching Single Phase 100 / 240 VAC 24VDC 5 VDC 12VDC 48VDC 1 Amp TO 20 Amp Three Phase 480 VAC 24VDC 10 Amp to 50 Amp DIN RAIL
More informationMEA1 Series 1kVDC Isolated 1W Dual Output DC/DC Converters
www.murata-ps.com MEA1 Series FEATURES UL 695 recognised Typical efficiency to 89.5% 1kVDC isolation Hi Pot Test Wide temperature performance at full 1 Watt load, 4 C to 85 C Industry standard pinout Power
More informationMLE Varistor Series. Features. Size Metric EIA Applications.
The MLE Series family of Transient Voltage Suppression devices are based on the Littelfuse Multilayer fabrication technology. These components are designed to suppress ESD events, including those specified
More informationRIX Series IEC Inlet Filters PCB Mounted
RIX Series IEC Inlet Filters PCB Mounted The RIX series of general purpose IEC inlet filters offers good performance for both common mode and differential mode interface, in a standard compact size. A
More informationElectrical 25 C Operating Temperature -40 C to 125 C. Application 2 Secondary Inductance Inductance Pri.
EFD Platforms - EFD, EFD0 and EFD Transformers and Inductors Power: 0W to 0W Three Different Platforms: THT and Low Profile Platforms:.mm to.mm Custom designs available Electrical Specifications @ C Operating
More informationHigh Current Power Inductors HCM1104 Series
High Current Power Inductors HCM1104 Series HALOGEN HF FREE Pb SMD Device Description Halogen free, lead free, RoHS compliant 125 C maximum total operating temperature 11.5x 10.3 x 4.0mm maximum surface
More information