Steel Enclosures Contents
|
|
|
- Philip Logan
- 6 years ago
- Views:
Transcription
1 Contents 12/001 - Type S1GK and GK/SD steel enclosures for industrial control use Type CS and GKP steel enclosures for standard starters Page 12/002 12/002 Type S3GK and GK/DW weatherproof steel enclosures 12/003 Type GG steel enclosure for industrial use 12/004 for type GK steel enclosures 12/003 for type GG steel enclosures 12/005 Dimensions 12/006, 12/007
2 12/002 GK For Industrial Control Use Dimensions cm (inches) Type Price Remarks UL/CSA Width Height Depth see price list S1 GK steel enclosures for industrial control use 23 (9.05) 30 (11.81) 20 (7.87) S1GK23X30X20/M (9.05) 40 (15.75) 20 (7.87) S1GK23X40X20/M (10.63) 60 (23.62) 20 (7.87) S1GK27X60X20/M (15.75) 40 (15.75) 20 (7.87) S1GK50X60X20/M (19.69) 60 (23.63) 20 (7.87) S1GK50X60X20/M (19.69) 80 (31.50) 20 (7.87) S1GK50X80X20/M (23.62) 80 (31.50) 20 (7.87) S1GK60X80X20/M (23.62) 100 (39.37) 20 (7.87) S1GK60X100X20/M Type 1, rugged wraparound construction sheet steel enclosures for industrial control panels and motor starters, include mounting plates, and mounting holes in rear. Knockout provided for conduit sizes: ½, ¾, 1 and 1½ on top and bottom. Left-side hinged doors, with ¼ turn screwdriver operated cam locks. Finish: ANSI 61 grey, baked polyester powder paint over phosphatized surfaces. Interior mounting plate is galvanized steel. for Standard Starters Dimensions Type Price Remarks UL/CSA Width Height Depth see price list cm (inches) cm (inches) cm (inches) Steel enclosures for standard starters 17 (6.69) 24 (9.45) 15 ((5.90) CS3/M (9.05) 40 (15.75) 17.5 (6.89) GKP23X40X17.5/M (10.63) 60 (23.62) 17.5 (6.89) GKP27X60X17.5/M (21.26) 60 (23.62) 17.5 (6.89) GKP54X60X17.5/M (9.05) 40 (15.75) 17.5 (6.89) GK/SD23X40X17.5/M+W (10.63) 60 (23.62) 17.5 (6.89) GK/SD27X60X17.5/M+W (15.75) 40 (15.75) 17.5 (6.89) GK/SD40X40X17.5/M+W (15.75) 60 (23.62) 17.5 (6.89) GK/SD40X60X17.5/M+W (21.26) 60 (23.62) 17.5 (6.89) GK/SD54X60X17.5/M+W (19.69) 60 (23.62) 27.5 (10.83) GK/SD50X60X27.5/M+W (23.62) 80 (31.50) 27.5 (10.83) GK/SD60X80X27.5/M+W (23.62) 100 (39.37) 27.5 (10.83) GK/SD60X100X27.5/M+W (31.50) 100 (39.37) 27.5 (10.83) GK/SD80X100X27.5/M+W (31.50) 120 (47.24) 27.5 (10.83) GK/SD80X120X27.5/M+W NEMA/EEMAC 1 general purpose enclosure with mounting plate for standard starter. Lift-off cover with knockouts for up to 3 pilot devices. Knockout on top, sides and bottom and rear for ½, ¾, 1, 1¼, 1½ conduits. Finish: phosphated and finished with ANSI 61 grey High quality standard starter enclosures of NEMA/EEMAC 1 construction, with mounting plate. Self-gasketting pilot device panel (for up to 3 pilot devices)is installed in the door. Knockout on top, sides and bottom for the following conduit sizes: ½, ¾, 1, 1¼, 1½ Doors: flush, lock-side gasketted open 110, hinged left hand side as standard. Latches are ¼-turn, screwdriver operated. Finish: phosphated and finished with ANSI 61 grey. Interior mounting plate is galvanized steel Type 12, dust and driptight, high quality indoor enclosures for industrial control use. Mounting plates and external wall mounting brackets are included. Enclosures are neoprene-rubber gasketted and supplied without conduit knockout. Flush-front, left-side hinged doors with ¼ turn screwdriver operated cam locks. Key-lockable door locks available as option. Refer to accessories on page 12/003. Finish: ANSI 61 grey, baked polyester powder paint over phophatized surfaces. Interior mounting plate is galvanized steel.
3 Weatherproof 12/003 Dimensions Type Price Remarks UL/CSA Width Height Depth see price list cm (inches) cm (inches) cm (inches) Weatherproof steel enclosures 23 (9/05) 30 (11.81) 20 (7.87) S3GK23X30X20/M+W (9.05) 40 (15.75) 20 (7.87) S3GK23X40X20/M+W (10.63) 60 (23.62) 20 (7.87) S3GK27X60X20/M+W (15.75) 50 (15.75) 20 (7.87) S3GK40X40X20/M+W (19.69) 60 (23.62) 20 (7.87) S3GK50X60X20/M+W (19.69) 80 (31.50) 20 (7.87) S3GK50X80X20/M+W (23.62) 80 (31.50) 20 (7.87) S3GK60X80X20/M+W (23.62) 100 (39.37) 20 (7.87) S3GK60X100X20/M+W Type 3R, rugged, weatherproof, wraparound construction sheet stetel enclosures for industrial control panels and motor starters, include mounting plates and wall mounting brackets. Enclosures are neoprene-rubber gasketted and supplied without conduit knockouts. Left-side hinged doors, with padlockable push-pull latches, and additional ¼ turn screwdriver cam lock on top for larger size enclosures. Dripshields are available as option. Contact Moeller Electric for details. Finish: ANSI 61 grey, baked polyester powder paint over phophatized surfaces. Interior mounting plate is galvanized steel. Weatherproof steel enclosures optional inner door available 50 (19.69) 60 (23.62) 27.5 (10.83) GK50X60X27.5/M/DW+W (23.62) 80 (31.50) 27.5 (10.83) GK60X80X27.5/M/DW+W (23.62) 100 (39.37) 27.5 (10.83) GK60X100X27.5/M/DW+W (31.50) 120 (47.24) 27.5 (10.83) GK80X120X27.5/M/DW+W (23.62) 100 (39.37) 40 (15.75) GK60X100X40/M/DW+W (31.50) 120 (47.24) 40 (15.75) GK80X120X40/M/DW+W Type 3R, weatherproof, sheet steel enclosures for industrial control panels and motor starters. Mounting plates, dripshields and wall mounting brackets are provided. Enclosures are neoprene-rubber gasketted and supplied without conduit knockouts. Flush-front, left-side hinged doors, with padlockable pushpull latches. Long inner doors are available as options. Contact Moeller Electric for details. Finish: ANSI 61 grey, baked polyester powder paint over phosphatized surfaces. Interior mounting plate is galvanized steel. Type Suffix Type Price Adder Remarks Wall mounted brackets set of 4 +W when ordered with the enclosure when ordered separately W-GK see price list Includes fastening hardware Wall or pole mounting brackets (set of 2) +PM Reversible zinc-plated mounting brackets Circuit diagram pocket Door keylocks 120 x 200 +SPT x 200 +SPT x 200 +SPT SV SPT SPT SPT SV Self-adhesive tape on rear for mounting Keylock, suppled with 2 keys.
4 12/004 GG, Modifications, UL/CSA With mounting plate Without mounting plate Modifications Type List Price Type List Price Entry Box Bottom Top Ventilated door see price list see price list +B-KR +T-KR +TK Single door GG6164/M/SL/SR GG6184/M/SL/SR GG8164/M/SL/SR GG8204/M/SL/SR Double door GG10164/M/SL/SR GG10204/M/SL/SR GG10206/M/SL/SR GG12164/M/SL/SR GG12204/M/SL/SR GG12206/M/SL/SR GG6164/SL/SR GG6184/SL/SR GG8164/SL/SR GG8204/SL/SR GG10164/SL/SR GG10204/SL/SR GG10206/SL/SR GG12164/SL/SR GG12204/SL/SR GG12206/SL/SR Type Price Adder Remarks see price list Lifting angles +T Key lockable handle +G Enclosure finish Special color Refer to Moeller Electric Set of 4 lifting angles to facilitate lifting for transportation and installation Key-lock 3 point car-type handle Color other than standard ANSI 61 gray
5 GG, Modifications, UL/CSA 12/005 Modifications Transparent door NEMA/EEMAC 12 enclosure Dripshield Bottom plate Hinged rear door Door hinged on right Ordering information +TD +D +RD +BG +TH +HR State: Type and modifications For dimensions, refer to page 12/006 Example:GG /M Depth x 10 cm = 40 cm Height x 10 cm = 160 cm Width x 10 cm = 100 cm Welded frame construction with bolt-on formed side sheets and welded back sheet. Frame is 13 gauge steel and panels are 16 gauge steel with flanges. Maximum size of single enclosure: 120 cm wide x 200 cm high x 60 cm deep 3-point car-type door handle is standard. 5 cm high floor mounting base without bottom plates in enclosure of base is standard (not included in height dimensions). Finish: phosphated and finished ANSI 61 gray baked. Mounting plate is galvanized steel.
6 12/006 Dimensions (1 = ) S1 GK..., S3 GK... Type A B C D E F G H cm inches cm inches cm inches cm inches cm inches cm inches cm inches cm inches S(1)(3)GK23X30X17.5/M S(1)(3)GK23X40X17.5/M S(1)(3)GK40X40X17.5/M S(1)(3)GK50X60X17.5/M S(1)(3)GK50X80X17.5/M S(1)(3)GK60X80X17.5/M S(1)(3)GK60X100X17.5/M S(1)(3)GK27X60X17.5/M GKP... Steel enclosures Type Width Height Depth Mounting plate Mtg. Width Depth Depth L H GKP23X40X GKP27X60X GKP54X60X D E F G Weight kg CS3... Steel enclosures Type A B C D E F CS
7 Dimensions (1 = ) GK/SD..., GK.../DW 12/007 Type Width W Height H Depth D Weight cm inches cm inches cm inches kg lbs GK/SD23X40X17.5/M+W GK/SD27X60X17.5/M+W GK/SD40X40X17.5/M+W GK/SD40X60X17.5/M+W GK/SD54X60X17.5/M+W GK(/SD)50X60X27.5/M+W(/DW) GK(/SD)60X80X27.5/M+W(/DW) GK(/SD)60X100X27.5/M+W(/DW) GK/SD80X100X27.5/M+W GK(/SD)80X120X27.5/M+W(/DW) GK60X100X40/M/DW+W GK80X120X40/M/DW+W GG... Type Width Height Depth Weight A B C kg GG6164(/M)/SL/SR GG6184(/M)/SL/SR GG8164(/M)/SL/SR GG8204(/M)/SL/SR GG10164(/M)/SL/SR GG10204(/M)/SL/SR GG10206(/M)/SL/SR GG12164(/M)/SL/SR GG12204(/M)/SL/SR GG12206(/M)/SL/SR
Type 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
Type 4X Panel Enclosures
Wall-Mount Enclosures Type 4X Premier Series with Quarter-Turn Latches Data Sheet Construction Enclosure and door are fabricated from code gauge Type 304 or Type 316L stainless steel (see pages 209 & 210)
C-Box Screw Cover with Knockouts NEMA 1. Commercial Enclosures Junction Boxes
C-Box Screw Cover with Knockouts Application Designed for general purpose indoor commercial use as a junction, pull or switch box. Standards UL-50 Type 1 cul Type 1 Complies with: NEMA Type 1 IEC 60529,
CONCEPT Wall-Mount Enclosure Accessories
CONCEPT Wall-Mount Enclosure Accessories The CONCEPT Enclosure Group Accessory Selection Guide Steel section 4 or Stainless Steel Enclosures section 6 Steel section 4 or Stainless Steel Window-Door Enclosures
Type 4 Panel Enclosures
Wall-Mount Enclosures Type 4 Premier Series with Quarter-Turn Latches Data Sheet and Catalog Number Accessories Premier panels NEMA panel adapters Depth adjustment brackets Print pockets Padlockable or
Disconnect Enclosures
Type 12 Heavy-Duty Single & Multi-Door Data Sheet pplication Houses electrical controls and equipment Protects against circulating dust, falling dirt and dripping non-corrosive liquids Standards UL 508
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST
133 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s are designed for control and instrumentation applications. They are a general-purpose enclosure intended for indoor use
TABLE OF CONTENTS. Manufacturers of Quality Electrical Enclosures. Page: Page:
TABLE OF CONTENTS Page: Access Doors. 9 Aluminum (NEMA 4X) 48 Bussed Current Transformer Cabinets... 7 Current Transformer Cabinets 7 Dividers (Cabinet & Wireway).. 50 Flush Covers (for Screw Cover Boxes).
Design Standard. Purpose: Design Standard:
Design Standard Purpose: This design standard has the purpose of creating a consistent application of motor-control centers throughout the East Side Union High School District, therefore achieving a standard
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series
NEMA 4 Single-Door Wall Mount Right-Flanged Disconnect SN4 Series Applications SN4 Series Designed to house the following: Allen-Bradley Bulletin 1494V disconnect switches with flange-mounted variable
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series
NEMA 4 and 12 Ultimate Single-Door Wall Mount Flanged Disconnect N412_CD Series Applications N412_CD Series Designed to house the following: AutomationDirect.com NEMA 1/12 Flexible shaft handle for Molded
Operator Enclosures. Console Type 12 - AW-14 Data Sheet
Console Data Sheet Construction Console body, panel cover and door, top assembly and writing desk are fabricated from (14) gauge steel ll continuous welded seams are finished smooth Panel cover is secured
GE 8000-Line Motor Control Centers
GE 8000-Line -1 ENCLOSURE TYPES TYPE 1 General Purpose, Indoor Intended for use indoors, primarily to prevent accidental contact of personnel with the enclosed equipment, in areas where unusual service
M-2900A Tapchanger Control Cabinet
CONTROLS M-2900A Tapchanger Control Cabinet New installations or retrofit for Cooper, General Electric, Siemens and Howard regulators NEMA 3 rated enclosures available in the following construction materials:
Wall-Mount Enclosures CONCEPT Wall-Mount Enclosures
Spec-00286 H763.422.2211 763.422.2600 Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures Wall-Mount Enclosures, Type 4 and 12 INDUSTRY STANDARDS Wall-mounting brackets required to maintain
Square-Duct Wireways. Catalog 5100CT0101R06/ Class CONTENTS Description... Page. Wireway Offerings... 3
Catalog 5100CT0101R06/11 2011 Class 5100 CONTENTS Description............................................. Page Wireway Offerings............................................ 3 General Purpose NEMA Type
[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]
![[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]](/thumbs/95/124192199.jpg "[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]")
[ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins
Commercial Boxes and Enclosures COM-24 COM-66
and Count on Hoffman to provide you with off-the-shelf innovation features to save you time and money. Perforated panels make component layout and mounting fast, easy, and flexible. Integral wood panels
Weather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
INDUSTRIAL SOLUTIONS Wallmount Enclosures...pgs IND 1-46 Wireway/Trough...pgs IND Freestanding Enclosures...pgs IND FMD Enclosures...
INDUSTRIL SOLUTIONS Wallmount s...pgs IND 1-46 Wireway/Trough...pgs IND 47-60 Freestanding s...pgs IND 61-72 FMD s...pgs IND 73-86 Operator Interface...pgs IND 87-136 Noncorrosive...pgs IND 137-193 I N
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES
BOXES WALL-MOUNTING BOXES AND TERMINAL BOXES ST WALL-MOUNTING BOXES WITH BLANK DOOR STP WALL-MOUNTING BOXES WITH PLEXI DOOR ST/STP COMPLEMENTARY ACCESSORIES SDV TERMINAL BOXES WITH SCREWED COVER SDF TERMINAL
Industrial Enclosures
www Eclipse Junior Series Single Door Enclosures - NEMA 12, 13, 4... 2 Series 2000, Single Door Enclosures - NEMA 12, 4... 40 1414 Series JIC Enclosures, Clamped, Lift Off Cover - NEMA 12, 13... 4 1414
SECTION 18 ENCLOSURES
COLTERLEC ELECTRICAL ENGINEERING PRODUCTS SECTION ENCLOSURES COLTERLEC ELECTRICAL ENGINEERING PRODUCTS 549 TM CONTENTS PHOENIX ENGINEERING & MANUFACTURING SOLUTIONS Stainless Steel Stainless Steel Wall
SINGLE DOOR BOXES. PAINT FINISH ETA standard epoxy polyester powder coating. Enclosure and door: colour RAL 7035 textured finish.
ST SINGLE DOOR BOXES Enclosure and door manufactured from 1.5 mm thick sheet steel. Mounting plate manufactured from 2.5 mm thick sendzimir sheet steel. Enclosure and door: colour RAL 7035 textured finish.
Type 4 Panel Enclosures
Type 4 Lift-Off Cover ata Sheet Seamless poured in place gasket Application Houses electrical controls and instruments Intended for indoor or outdoor use Protects against windblown dust and rain, splashing
Standards IEC IEC 529 Rated IP66-9 EN EN Mounting frame: removable predrilled reinforced DIN-rails
Features - The range is available in seven sizes, ranging from 12" x 8" to 40" x 32". - The cabinets are made of beige (RL 7032) hot molded fiberglass reinforced polyester, dyed in mass. The enclosure
EQUIPMENT PROTECTION
Contractor Specifier s Guide EQUIPMENT PROTECTION WWW.PENTAIRPROTECT.COM/HOFFMAN Volume 8 Hoffman Has You Covered From utility junctions to protecting relays, contactors and wire, Hoffman has you covered.
14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB H0N
14x12x7 Inch 48 VDC (PoE) Power-Over-Ethernet Powered, Weatherproof & Insulated with Heating System - Model: NB141207-4H0N Applications and Features Features: Molded Fiberglass Reinforced Polyester (FRP)
CUSTOM ENCLOSURE CUTOUTS
www.factorymation.com/enclosures ENCLOSURES 147 WWW.FACTORYMATION.COM/ENCLO- CUSTOM ENCLOSURE CUTOUTS We ll cut the holes to your specifications so the enclosure arrives... READY FOR YOUR ASSEMBLY! Enclosure
ELECTRICAL ENCLOSURES AND MODULAR CABINETS EXM MANUFACTURING LTD. Since 1975
www.exmweb.com ELECTRICAL ENCLOSURES AND MODULAR CABINETS 19 EXM MANUFACTURING LTD. Since 1975 NEMA 12-13 SAFETY DISCONNECT 9500 UxD Right flange mounted disconnect multi-door enclosure The 9500 UxD oil
Type 4 Panel Enclosures
Ground-Mount Enclosures Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat NSI 61 gray polyester powder finish pplication Houses electrical controls and instruments Easy access panels or
CONCEPT Accessories. Catalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in.
Spec-00186 KPH FX (763) 422-2600 422-2211 Accessories CONCEPT Accessories Accessories: CONCEPT Conversion Kit Conversion Kit adapts enclosure for mounting standard NEMAstyle panels in CONCEPT enclosures.
Standard Product Low Profile Type 12 One-Door Disconnect Enclosures
763.422.2600 Spec-00005 M763.422.2211 Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Wall-Mount Preferred-Cutout s Low-Profile Type 12 s and Accessories Low-Profile, One- to Five-Door
Kaedra Weatherproof DIN Type Enclosures
Multi 9 System Catalog Section 6 Additional System Devices Kaedra Weatherproof DIN Type Enclosures Applications Expandable enclosures for service, industrial, or equipment applications Protects against
Operator System Enclosures
27 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 Operator Systems are designed to house a wide variety of equipment; panel mount, rack mount, desktop PC s, monitors,
Heavy-Duty Enclosures Type 12 Free Standing Disconnect with Sub Panel
eavy-uty Enclosures PPLICTIONS - esigned to provide protection for electrical instruments, terminals, and controls from dust, oil, dirt and dripping liquids. CONSTRUCTION - abricated from 10 gauge carbon
Rittal CM Compact System Enclosures
Rittal CM Compact System Enclosures Compact class = Top class: Infinite possibilities R Compact enclosure on the outside, Top enclosure on the inside! Index Convincing details... 3 5 Compact system enclosures
TYPE 1 SCREW COVER WIREWAY
TYPE 1 SCREW COVER WIREWAY Construction: C & I Enclosures Type 1 Screw Cover and Hinge Cover Wireway is fabricated in accordance with U.L. specifications from code gauge steel. Wireway is furnished standard
Free-Stand, Single or Dual Access, Type 12
Spec-00291 ree-stand Enclosures Type 12 ree-stand Enclosures ree-stand, Single or Dual Access, Type 12 INDUSTRY STANDARDS UL 508A Listed; Type 12; ile No. E61997 cul Listed per CSA C22.2 No. 94; Type 12;
Rack Mount devices shown not included Custom cabinet shown
763.422.2588 SPEC-00215 M763.422.2661 NETWORKING OUTSIDE PLANT PRODUCTS COMLINE OSP WALL-MOUNT CABINET PACKAGE AND ACCESSORIES Outside Plant Products COMLINE OSP Wall-Mount Cabinet Package and Accessories
CABINETS & ENCLOSURES
S & ENCLOSURES Floor Standing Cabinets A4 Series 18RU, 27RU & 42RU PSS 262 Wall Mounted Cabinets WM Series 6RU, 12RU & 18RU PSS 263 ZH Series 6RU, 12RU & 18RU PSS 263 Cabinet ACCESSORIES Wall & Floor Mounted
ARIA Series configuration options and specifications
Series configuration options and specifications AN Opaque Cover Enclosures (AN) 80 Bonded Window Enclosures (ANB) 82 * Prefix AN: Flat opaque cover ANB: Flat cover with bonded window ANG: Flat cover with
Wall-mounting steel enclosures suitable for any CRN and CRNG application
Wall-mounting steel enclosures suitable for any CRN and CRNG application 1 2 3 4 5 6 1 Front rain gutter prevents the entry of water, oil or liquids, ensuring IP66 protection. 10 9 8 7 1/18 2 A complete
Introduction. Features. Intelligent Technologies Motor Control Center Structures
Intelligent Technologies Technical Data New Information Description Page Intelligent Technologies General............................................. 2 s.......................................................
19 inch Rack Cabinets
Setting new standards in outstanding design and superior quality manufacturing are just two of the main goals which Hallam Manufacturing build into all their products. Through research,development and
3/2 Introduction. Unequipped Distribution Boards (Flat Pack) 3/6 8GK1 surface-mounting distribution boards
ALPHA 400 - DIN Wall-Mounted Distribution Boards /2 Introduction Unequipped Distribution Boards (Flat Pack) /6 8GK1 surface-mounting distribution boards Pre-Assembled Unequipped Distribution Boards /7
Pushbutton Enclosures
7 SAGINAW CONTROL & ENGINEERING STOCK PRICE LIST Saginaw Control & Engineering s Type 12 are designed to house oil-tight pushbuttons, switches, and pilot lights. These enclosures are primarily used in
OUR VISION STAINLESS STEEL MILD STEEL MODULAR FLOOR STANDING NON METALLIC P F BLACKBURN SOUTH VIC 3130
Excalibur REAZ AUSTRALIA Enclosures PTY LTD 59 P.O. Northville BOX 2340 Drive Barnsley NSW 2278 BLACKBURN SOUTH VIC 3130 T - 03 9878 4141 sales@reaz.com.au EX-EC/S General Purpose Wall Mount Enclosures
Weatherproof Boxes, Covers, Lampholders and Lighting Fixtures
Applications Use in branch circuit wiring for wet, damp or dry locations. May be used as a junction box or a device box for switches, receptacles, GFCIs, etc. Lampholders are for use in exterior and interior
Panel, 18.20x14.20, Bulletin CWP (CONCEPT Enclosure Panels),
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Material Material, Color, and Finish
Installation Instructions - D-Series Warming Cabinet Instruction Door for Hinge UseReversal (Glass and Stainless Steel Doors)
Header Cam Lock Reversal... pg 1-4 Glass Door hinge reversal..... pg 5-9 Steel Door hinge reversal..... pg 10-13 Remove Panels Before reversing door hinges, the Header Cam Lock assembly must be reversed.
THE ENCLOSURE HARDWARE SUPPLIER
FABTECH SUPPLY THE ENCLOSURE HARDWARE SUPPLIER Our Products JIC Style Enclosures JIC Style Cover Clamp Bracket... 5 JIC Style Cover Clamp... 6 JIC Style Cover Clamp Assembly... 6 JIC Cover Clamp Screws...
Catalog Number Material Fits CONCEPT Enclosure CCPM4 Steel When A x B is equal to or less than x in. (762 x 762 mm)
SPEC-00186 CONCEPT Accessories CONCEPT Accessories CONCEPT PANEL CONVERSION KIT Conversion Kit adapts enclosure for mounting standard NEMA-style panels in CONCEPT enclosures. Bracket attaches to rear collar
safybox BRES GRP POLYESTER ENCLOSURES Double Insulation polyester enclosures. Light Grey Colour RAL7035. Self-extinguishing material
Double Insulation. Light Grey Colour RAL7035. Self-extinguishing material End user friendly hinge-pin system, It enables to work separately on the rear back panel and on the door, making the assembly more
Product Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
C13 / C15 / C18 SOUND ATTENUATED ENCLOSURES
/ / SOUND ATTENUATED ENCLOSURES US Sourced Diesel Generator Set - 750 60 Hz Image shown may not reflect actual configuration Features Robust / Highly Corrosion Resistant Construction Factory installed
C13/C15/C18 Sound Attenuated Enclosures. Features. Enclosures. U.S. Sourced Diesel Generator Set kw 60 Hz
// Sound Attenuated Enclosures U.S. Sourced Diesel Generator Set - kw 60 Hz Image shown may not reflect actual configuration Features Robust/Highly Corrosion Resistant Construction Factory installed on
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
Uses, Certifications, and Standards Electrical Control and Instruments, Indoor/Outdoor EXTERNAL FEET, WALL standard UL 508, CSA C22.
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 121264CHC Encl 12X12X6 N4 Enclosure Cooper B-Line/Cable Tray Catalog Number Manufacturer escription Weight per unit Product
The UL Type 3R Package is specifically designed for Adjustable Frequency Drives, such as Yaskawa's E7, F7, G7, P7, and iqpump models.
The UL Type 3R Package is specifically designed for Adjustable Frequency Drives, such as Yaskawa's E7, F7, G7, P7, and iqpump models. A new benchmark for performance, benefits and quality, the UL Type
PH (763) FX (763) hoffmanonline.com
PH (763) 422-2211 FX (763) 422-2600 : 1 ContractorType 1 Chapter Contents Screw-Cover Type 1 Pull Boxes and Accessories Screw-Cover, Type 1............................................... 3 Type 1 Pull
IP54 Floor Standing & Wall Mounted Cabinets
IP54 Floor Standing & Wall Mounted Cabinets Our IP54 Style cabinets are designed to be used in areas of high dust levels and damp environments. They are available in 12U, 27U & 42U in widths/depths of
Rittal WM Selection Guide. Carbon & Stainless Steel, Disconnect, Slope Top
Rittal M Selection Guide Carbon & Stainless Steel, isconnect, Slope Top Rittal allmounts M Enclosures Efficient esign, Versatility Rittal s M enclosure sets the standard for maximum use of space and ease
Prisma Plus G enclosures IP30, IP31, IP43 enclosures
Prisma Plus G IP30, IP31, IP43 Prisma Plus G IP30, IP31, IP43 Presentation For safe and upgradeable electrical switchboards > Safety of people and property > Continuity of service > Optimization and upgradeability
Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type 12
763.422.2600 SPEC-00245 L763.422.2211 DISCONNECT WALL-MOUNT PREFERRED-CUTOUT DISCONNECTS PREFERRED CUTOUT, DISCONNECTS, TYPE 12 Wall-Mount Preferred-Cutout Disconnects Preferred Cutout, Disconnects, Type
Floor Doors. Babcock-Davis Always right there.
Babcock-Davis Babcock-Davis floor, vault, and sidewalk doors provide reliable and safe access below ground and between building floors. With Babcock-Davis, we build our services around your specified needs.
Two Seas Metalworks Shell Lane fax Rev
This catalog provides product information and pricing for our complete line of Battery Enclosures and Battery Racks designed specifically for the PV industry to hold different sized batteries from all
Disconnect Enclosures
Wall-Mount Enclosures Type 12 Flange-Mount....................................................................... 296-298 Wall-Mount Enclosures Type 4 & 4X Premier Series 2-Point or 3-Point Locking..........................
EB SERIES INSTRUMENT ENCLOSURES
EB SERIES INSTRUMENT ENCLOSURES EB Series Instrument Enclosures 1 5 2 7 4 6 Multiple-fold 1 gutter type edge provides extra stability and protects against dirt and water when enclosure is opened. Grounding
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes
IP65/IP66 ABS/Polycarbonate Screw Lid Boxes p Versatile, lightweight & durable p Choice of materials: polycarbonate for rugged applications or ABS as an economic alternative p IP protection for outdoor
LENOXZLOCKER. Lenox Z Locker - Solid Plastic. Construction - Standard Features. Sizes. Doors and Frames. Sides, Tops, Bottoms, Dividers and Shelves
Tough, attractive, solid plastic never needs painting; resists dents and scratches Impervious to moisture lockers will not rust or delaminate Made from 30% pre-consumer recycled HDPE plastic Durable, vandal
ACCESSORIES FOR SZE2 CABINETS
ZPAS 143 DOORS Doors Intended for use instead of front solid door or rear panel. Maximum door opening angle: 120 Sheet steel textured powder paint, light grey (RAL 7035), stiffened profiles, brown smoked
Accessories. Accessories. B-Line series electrical enclosures
Panels JIC & Small Panels, RHC Panels, Type 1 Medium Panels, NEM Panels, JIC Perforated Panels, Medium Perforated Panels, Flanged Panels, Wood ack Panels,...........................................................................
Shelves, Keyboard Trays and Gland Plates Folding Shelves
SPEC-00035 Shelves, Keyboard Trays and Gland Plates Folding Shelves STAINLESS STEEL FOLDING SHELF Size AxB in./mm ACSHELF1212SS 12.00 x 12.00 305 x 305 ACSHELF1818SS 18.00 x 18.00 457 x 457 ACSHELF2424SS
Accessories. Accessories. Meter Mounting Equipment
Covers & Sealing Rings..................................................................... 119 AW & H-Base Hubs.......................................................................... 119 Flush Trim
Wall-Mount Enclosures
Wall-Mount Enclosures Protection When Safety Matters Most When selecting an enclosure, application can be associated with market or product. For example, is your enclosure going to be used in a petrochemical
LENOXLOCKER. Lenox Locker - Solid Plastic. Construction - Standard Features
Tough, attractive, solid plastic never needs painting; resists dents and scratches Impervious to moisture lockers will not rust or delaminate Made from 30% pre-consumer recycled HDPE plastic Durable, vandal
Gland Plate 1.4mm mild steel. -Opening: Situated at the far rear of the enclosure to make cabling onto the mounting plate easier.
14 SM SHEET STEEL ENCLOSURES ITH MOUNTING PLATE FOR ALL MOUNTING SM Delivery contents: Complete enclosure with mounting plate and fixing material, Blank flange with gasket and screws. Nylon washers for
CT Metering. CT Metering. Meter Mounting Equipment
Single Meter Sockets, Without Bypass - CT Rated.................................. 67-68 Single Meter Sockets, CT Rated With Test Switch Bypass Provision............. 69-70 Meter Socket / Enclosure Combination
MEDIUM VOLTAGE AIR INSULATED ARC-RESISTANT LOAD BREAK AND DISCONNECT SWITCHES
MEDIUM VOLTAGE AIR INSULATED ARC-RESISTANT LOAD BREAK AND DISCONNECT SWITCHES Description JRS arc-resistant fused/non-fused load break and fused/non-fused disconnect switches are available for applications
APX Technologies, lnc.
APX Technologies, lnc. EXCELLENCE IN PROTECTION 200 Oregon Street, Mercersburg, PA 17236 Tel. 717-328-9399 Fax.717-328-2447 www.apx-technologies.com 17.63 48.75 112.50 8.50 20.00 6.75 5.00 5.00 7.12 BATTERY
E3 VISE ACTION Compression Latch
38 E3 VISE ACTION Compression Latch Overview First 90 0 turn: rotates behind frame The door is now latched against opening Then as you complete the half-turn motion, the shaft and cam compress to pull
Preferred Cutout, Disconnect Enclosure, Type 12
763.422.2600 Spec-00245 J763.422.2211 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Wall-Mount Preferred-Cutout s Preferred Cutout, s, Type 12 Preferred Cutout, Enclosure, Type 12 INDUSTRY
Junction Boxes & Enclosures JBES and ECES Series: 316L Stainless Steel Enclosures Increased Safety
JBES Series Medium Voltage 11 kv ECES Series Compliance Data: ATEX - IEC: ATEX IEC CE Ex e II Ex ia IIC; Ex ib IIC T6 to T4 Ex td A21 T80 C to T130 C Ex de IIC; Ex demb IIC Operating Temperatures: -50
ULTRX, Type 4X. Panel Size. Conductive
Spec-00402 EPH FX (763) 422-2600 422-21 Non-Metallic Fiberglass Industry Standards Mounting brackets required to meet UL/CSA external mounting requirements. UL 508A Listed; Type 3, 3R, 4, 4X, 12, 13; File
10 Load and Motor Switchgear
10 Load and Motor gear Safety es 01941E00 Safety switches ensure the obligatory isolation of electrical power under condition of equipment cleaning, maintenance and repair. Other methods of isolation,
Product Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33
SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
Saturn Cutoff. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type: SAC Saturn Cutoff SAC
Date: Customer: Project: Type: Qty: Saturn Cutoff Order Code: SAC - - - - - - - - SAC Series SAC Saturn Cutoff Pole Order Code: - - - Series Height Finish Options Optics R Type II Distribution R Type V
W-Series Junction Boxes
W-Series Junction Boxes Application and Selection Junction boxes, designed for hazardous and non-hazardous locations, are used in a variety of industries to perform the following functions: As a pull box
Accessories. Accessories. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
Panels JIC & Small Panels, RHC Panels, Type 1 Medium Panels, NEM Panels, JIC Perforated Panels, Medium Perforated Panels, Flanged Panels, Wood ack Panels,..........................................................
AE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets
FMD ENCLOSURES AE Wallmount FMD Enclosures AE Wallmount Carbon Steel Cabinets Superior in design, Rittal's AE flange mounted disconnect enclosures have fewer moving parts, which reduces assembly and installation
1.6 Accessories include tool-free snap-in technology options for air flow, cable management, shelves, power distribution units, etc.
Rittal TS IT Rack Guide Specifications TS IT network server enclosure 1.0 General Description 1.1 Modular Free Standing Equipment Cabinet 1.2 Various combinations of dimensions: 1.2.1 Height: 48 /1200mm,
SECTION METAL ATHLETIC SPORT LOCKERS
SECTION 10 50 13 - METAL ATHLETIC SPORT LOCKERS PART 1 GENERAL 1.1 SECTION INCLUDES A. DESCRIPTION: Furnish and install factory-assembled Heavy-Duty MIG-Welded Metal Lockers, complete, as shown and specified
SPECIAL SPECIFICATION 8676 Solar Panel Power Supply System
2004 Specifications CSJ 2552-01-033 SPECIAL SPECIFICATION 8676 Solar Panel Power Supply System 1. Description. This work shall consist of furnishing and installing an integrated Solar Panel Power Supply
CABINET OPTIONS AND DESIGNATORS CODE LETTERS
CABINET OPTIONS AND DESIGNATORS Hinges: ~Stainless steel lift off Nuts and Bolts: ~ Stainless steel Hardware: ~ Handles and Corbin locks are stainless steel or zinc plated Windows: ~ Lexan Backboards:
C OMMERCIAL SOLUTIONS
OMMERIL SOLUTIONS asic luminum Outdoor s... OM 1-2 Small Type I allmount s... OM 3 Large Type I allmount s... OM 4 Small inge over oxes... OM 5 Large inge over oxes... OM 6 Lay-In Type I ireway... OM 7-8
Type 4X Panel Enclosures
Type 4 s Type 4 s Type 4 Single-Door Data and Illustration Sheet Application Houses electrical controls and instruments Intended for indoor or outdoor use where a corrosive environment exists Protects
Boxes C " wide, 5 3 4" deep. C " wide, 5 3 4" deep. Branch Breaker Side Gutters. Type Breaker (inches) C1 BL, BLH, HBL C2 BQD 3.
Circuit Breaker / Column Type Type C1 240 Volts AC Mains Branch UL Short Circuit Rating 200,000 IR Branch Breaker Symmetrical Interrupting Rating Based on Underwriters Test Procedure Type C2 480Y/277 Volts
SECTION FIRST RESPONDER SERIES HEAVY DUTY PERSONNEL LOCKERS DEBOURGH MFG. CO. 10/15/2013
SECTION 10501 FIRST RESPONDER SERIES HEAVY DUTY PERSONNEL LOCKERS DEBOURGH MFG. CO. 10/15/2013 PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General