Gland Plate 1.4mm mild steel. -Opening: Situated at the far rear of the enclosure to make cabling onto the mounting plate easier.

Transcription

1 14 SM SHEET STEEL ENCLOSURES ITH MOUNTING PLATE FOR ALL MOUNTING SM Delivery contents: Complete enclosure with mounting plate and fixing material, Blank flange with gasket and screws. Nylon washers for sealing the wall-fastening holes 2 door-mounting profiles (from size SM6040, plastic key DIN 5mm. all-fastening flaps SMB004 are not included please order seperatly. Degree of protection: IP 66 NEMA 4, 12 and 13, IP 55 Shock resistance: IK10 according to lec Surface: Powder-structure coating, grey RAL 7035 TECHNICAL DATA Body: : 1.2mm / 1.4mm SM6060 and above / 1.5mm SM108 and above, and mm depth. Double door: 1.4mm SM / 1.5mm SM and above mild steel enclosures folded and seam welded. Cable entry is reached by a maximum gland opening, which is placed in the most far back position of the enclosure frame. To allow for air circulation around the rear and for wall fixing, four 20.4mm diameter x 2mm deep depressions are pressed out with an 8.5mm diameter hole.. AII parts are pre-treated with iron phosphate, demineralised and protected with a epoxy polyester powder paint RAL 7035 with structured finish. Door: 1.2mm mild steel / 1.4mm SM6060 and above / 1.8mm SM1060 and above. Double door: 1.4mm mild steel / 1.8mm SM and above. Surface mounted with 130 opening. Concealed removable hinges with captive pin. Hinges can be mounted to llow left or right hand opening. From height mm and above there are studs to mount door profiles SMTP, and from height and above the profiles are included as standard. Sealing is ensured by an injected one piece polyurethane gasket. Lock: Customized lock with double grip for easy opening of the door. Double-bit 5mm insert and 90 movement. mm high enclosures and above have espagnolette three point locking. Other inserts are available as an accessory Double door have espagnolette three point locking.. Mounting plate: The mounting plate is marked vertically at 10mm intervals for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides from mm and above are strengthened by folded edges. By using the SMAMG accessory the mounting plate position can be adjusted to any depth. Gland Plate 1.4mm mild steel. -Opening: Situated at the far rear of the enclosure to make cabling onto the mounting plate easier. Protection: The enclosure offers maximum protection_to the user and equipment by a protection degree IP66 according to lec and IEC_50102 (IP 55 - IK 10 for enclosures with and enclosures with glazed door). hen using an inner door, modular framework or 19 swing frame, protection degree IP20 is guaranteed within the enclosure. Omplying with NEMA 4, 12 and 13. Finish: RAL 7035 structure powder coating. Mounting: The enclosure is secured to the wall using: bolts, directly through the rear wall and protected inside with plastic ashers, or wall mounting brackets SMB004 at the rear screwed from the enclosure. In both cases the lp / NEMA degrees are guaranteed.

2 SM SHEET STEEL ENCLOSURES ITH MOUNTING PLATE FOR ALL MOUNTING continued DIMENSIONS 15 SINGLE DOOR: SINGLE DOOR:

3 16 SM SHEET STEEL ENCLOSURES ITH MOUNTING PLATE FOR ALL MOUNTING continued TYPES SM SM SM SM SM SM SM SM SM SM4030 SM4040 SM4050 SM4060 SM SM SM5040 SM5040 SM5040 SM5050 SM5050 SM SM6040 SM6040 SM SM SM6050 SM6050 SM6050 SM6060 SM6060 SM6060 SM6080 SM7050 SM SM1006 SM1006 SM SM8040 SM1008 SM1008 SM1008 SM8060 SM SM8060 SM8060 SM8060 SM SM1206 SM SM SM SM8060 SM1208 SM SM1302 SM SM SM8080 SM8080 SM8080 SM

4 SM SHEET STEEL ENCLOSURES ITH MOUNTING PLATE FOR ALL MOUNTING continued DIM. (HxxD) mm MOUNTING PLATE INSTALLATION FLANGE OPENING LOCK EAN CODE AVAILABLE ORDER NO. (Hx) mm DEPTH (D) mm (xd) mm / SIZE MILD STEEL SINGLE DOOR ENCLOSURES 200x200x x x56 / SM x200x x x56 / SM x250x x x56 / SM x250x x x56 / SM x250x 270x x56 / SM3025 xx x x56 / A SM xx 270x x96 / A SM x250x x x56 / SM xx x x56 / A SM xx 370x x96 / A SM4030 xx 370x x96 / B SM4040 xx 370x x96 / C SM4050 xx 370x x96 / D SM4060 xx 470x x96 / A SM5030 xx x x56 / B SM xx 470x x96 / B SM5040 xx 470x x96 / B SM5040 xx 470x x96 / B SM5040 xx 470x x96 / C SM5050 xx 470x x96 / C SM5050 xx x x56 / B SM xx 570x x96 / B SM6040 xx 570x x96 / B SM6040 xx 570x x96/ B SM6040 xx x x56 / C SM xx 570x x96 / C SM6050 xx 570x x96 / C SM6050 xx 570x x96 / C SM6050 xx 570x x96 / D SM6060 xx 570x x96 / D SM6060 xx 570x x96 / D SM6060 xx 570x x310x96 / B SM xx 670x x96 / C SM xx 670x x96 / C SM7050 xx 770x x96 / B SM8040 xx 770x x96 / D SM8060 xx 770x x96 / D SM8060 xx 770x x96 / D SM8060 xx 770x x96 / D SM8060 xx 770x x310x96 / B SM8080 xx 770x x310x96 / B SM8080 xx 770x x310x96 / B SM

5 18 SM SHEET STEEL ENCLOSURES ITH MOUNTING PLATE FOR ALL MOUNTING continued DIM. (HxxD) mm MOUNTING PLATE INSTALLATION FLANGE OPENING LOCK EAN CODE AVAILABLE ORDER NO. (Hx) mm DEPTH (D) mm (xd) mm / SIZE MILD STEEL SINGLE DOOR ENCLOSURES xx 970x x96 / D 3 pt SM1006 xx 970x x96 / D 3 pt SM1006 xx 970x x310x96 / B 3 pt SM1008 xx 970x x310x96 / B 3 pt SM1008 xx 970x x310x96 / B 3 pt SM xx 1170x x96 / D 3 pt SM xx 1170x x310x96 / B 3 pt SM xx 1170x x310x96 / B 3 pt SM1208 MILD STEEL DOUBLE DOOR ENCLOSURES xx 570x x310x96 / B 3 pt SM x1200x 770x x510x96 / D 3 pt SM x1200x 770x x510x96 / D 3 pt SM xx 970x x410x96 / C 3 pt SM xx 1170x x410x96 / C 3 pt SM x1200x 1170x x510x96 / D 3 pt SM x1200x 1170x x510x96 / D 3 pt SM xx 1370x x410x96 / C 3 pt SM all-fastening flaps, glavanized SMB004 MODULAR CHASSIS SMIE SMIE03025 Used for easy mounting of DIN-rail components with a maximum height of 68mm. Distance between rows 125mm. If required, the standard enclosure door can be replaced with a glazed door. Usable depth between front cover and external door: 35mm. Adjustable depth position with AMG accessory. In stainless steel enclosure machining is required. Material: DIN-rails PP0735 made of 1.20mm galvanized steel, vertical profiles 1.5mm mild steel, and front cover 1.5mm mild steel. Finish: RAL 7035 structure powder coating. Pack quantity: Slotted front panel, two vertical profiles, top and bottom blank panels, one DIN-rail per row, and mounting accessories. FOR EQUIPMENT CABINETS (Hx) mm ROS MODULES EAN CODE AVAILABLE ORDER NO. x SMIE03025 x SMIE04030 x SMIE05040 x SMIE06040 x SMIE x SMIE07050 x SMIE08060

6 VENTILATED GLAND PLATE Material: 1.4mm mild steel Finish: RAL 7035 structure powder coating Protection: Complies with IP 23, in bottom or vertical position 19 DESCRIPTION/DIM. (xd) mm TYPE EAN CODE AVAILABLE ORDER NO. x96 A SVF x96 B SVF x96 C SVF x96 D SVF0004 CONNECTION GLAND PLATE Material: 1.4mm mild steel Finish: RAL 7035 structure powder coating DESCRIPTION/DIM. (xd) mm TYPE EAN CODE AVAILABLE ORDER NO. x96 A SVBF x96 B SVBF x96 C SVBF x96 D SVBF004 GLAND PLATE ITH KNOCK OUTS Material: 1.4mm mild steel Finish: RAL 7035 structure powder coating DESCRIPTION/DIM. (xd) mm TYPE EAN CODE AVAILABLE ORDER NO. x56 4xM16, 3xM20A SFA0001 x96 4xM16, 5xM20, 2xM25, 2xM32 A SFA0011 x96 12xM16, 1xM25, 1xM32 A SFA x56 6xM16, 3xM20, 1xM25 B SFA x96 9xM16, 4xM20, 2xM25, 2xM32 B SFA x96 21xM16, 1xM32, 1xM25 B SFA x56 9xM16, 4xM20, 1xM25 C SFA x96 18xM16, 5xM20, 4xM25, 2xM32 C SFA x96 21xM16, 10xM20 C SFA x96 27xM16, 5xM20, 4xM25, 2xM32 D SFA x96 18xM16, 14xM20, 3xM25,1xM32 D SFA0042

7 RAIN HOOD FOR SM ENCLOSURES 20 Material: 1.5mm mild steel Finish: RAL 7035 structure powder coating DESCRIPTION/DIM. (xd) mm EAN CODE AVAILABLE ORDER NO. 250x SMD x SMD2521 x SMD3015 x SMD3021 x SMD4015 x SMD4021 x SMD4026 x SMD4030 x SMD5015 x SMD5021 x SMD5026 x SMD5030 x SMD6021 x SMD6026 x SMD6030 x SMD6040 x SMD8021 x SMD8026 x SMD8030 x SMD8040 x SMD x SMD x SMD1240 I KNO HERE TO FIND IT! THE SCHRACK TECHNIK EB SHOP ITH NAVIGATOR.SCHRACK.COM Finding product information made easy Buying products around the clock Quick access customer service

8 TRANSPARENT DOORS SMF3025AC Description: To replace the standard door, it provides a clear view of the components installed inside the enclosure. Allows all the options of the locking program. Material: 1.2mm mild steel / 1.4mm SMF6060AC and above / 1.8mm SMF1060AC and above, and 3mm transparent acrylic glass. Finish: RAL 7035 structure powder coating Protection: Complies with IP 55 Pack quantity: 1 door 21 VIEING AREA DIM. (Hx) mm EAN CODE AVAILABLE ORDER NO. 159x93 x SMF3025AC 159x143 x SMF3030AC 259x143 x SMF4030AC 259x243 x SMF4040AC 359x243 x SMF5040AC 459x243 x SMF6040AC 459x343 x SMF6050AC 459x443 x SMF6060AC 559x x SMF7050AC 659x443 x SMF8060AC 859x427 x SMF1060AC 859x627 x SMF1080AC 1059x x SMF1AC 1059x x SMF1280AC DOOR MOUNTING PROFILES Description: To strengthen the door, mounted on the inside of the door on the M6 welded studs. equipped with 10mm hole pattern. Material: 1.4mm galvanizeed steel Dimension: 15x14 mm HEIGHT mm EAN CODE AVAILABLE ORDER NO SMTP SMTP SMTP SMTP SMTP SMTP SMTP140

9 LOCKS AND INSERTS 22 Description: Inserts to replace the standard double-bit 3mm insert in the standard polyamide lock. Material: Polyamide DESCRIPTION EAN CODE AVAILABLE ORDER NO. Standard DIN 5mm insert SSL3532 Alternative handles to replace the standard lock SMLT561 Swing Handle for SM SSL1107 Cylinder Sash Lock SSL3844 DIN 3mm insert SSL3530 DIN 5mm insert SSL3535 Tri 8mm insert SSL3515 Sqr 7mm insert SSL3520 Sqr 8mm insert SSL3525 Key 333 for Halfcylinderlock DV DV Door Stop for SM Enclosures SMDSTP2 Turnbuckle for halfcyl. lock - SM w/o punching IU I KNO HERE TO FIND IT! ITH THE SCHRACK TECHNIK LiVE-PHONE APP Access technical product information at any time and from everywhere See availability and price immediately Order desired products easily

10 MINIPOL POLYESTER ENCLOSURES Hot pressed, fibreglass-reinforced polyester, colour grey RAL 7035 Free of halogens Degree of protection IP 66 according to EN Double insulated according to EN Self-extinguishing eather-resistant MINIPOL High shock resistance ater-resistant Temperature range: -50 C to 150 C ith flaps for fastening to wall ith swing handle w/o cylinder insert UV-resistant UL, CSA, NEMKO, LGAI and KEMA certified Many areas of use and combinations V = viewing window 3P = 3-point rod lock with swing handle w/o semicylinder insert (otherwise 2x double tongue fastener) IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM IM DESCRIPTION DIM. (xhxd) mm EAN CODE AVAILABLE ORDER NO. POLYESTER MINIPOL ALL ENCLOSURE Pol. wall enclosure x250x IM Pol. wall enclosure xx IM Pol. wall enclosure xx IM Pol. wall enclosure xx IM Pol. wall enclosure xx IM Pol. wall enclosure xx IM Pol. wall enclosure xx IM Pol. wall enclosure V x250x IM Pol. wall enclosure V xx IM Pol. wall enclosure V xx IM Pol. wall enclosure V xx IM Pol. wall enclosure V xx IM Pol. wall enclosure V xx IM Pol. wall enclosure V xx IM008986

11 24 MINIPOL POLYESTER ENCLOSURES continued DESCRIPTION DIM. (xhxd) mm EAN CODE AVAILABLE ORDER NO. POLYESTER MINIPOL ALL ENCLOSURE Pol. wall enclosure 3P xx IM Pol. wall enclosure 3P xx IM Pol. wall enclosure 3P xx IM Pol. wall enclosure 3P xx IM Pol. wall enclosure 3P xx IM Pol. wall enclosure 3P xx IM Pol. wall enclosure 3P/V xx IM Pol. wall enclosure 3P/V xx IM Pol. wall enclosure 3P/V xx IM Pol. wall enclosure 3P/V xx IM Pol. wall enclosure 3P/V xx IM Pol. wall enclosure 3P/V xx IM POLYESTER MOUNTING PLATE DESCRIPTION DIM. (xhxd) mm EAN CODE AVAILABLE ORDER NO. Polyester mounting plate, Minipol 268x216x IMMP0032 Polyester mounting plate, Minipol 358xx IMMP0043 Polyester mounting plate, Minipol 358x360x IMMP0044 Polyester mounting plate, Minipol 458x360x IMMP0054 Polyester mounting plate, Minipol 558x360x IMMP0064 Polyester mounting plate, Minipol 558x460x IMMP0065 Polyester mounting plate, Minipol 754x556x IMMP0086 METALL MOUNTING PLATE DESCRIPTION DIM. (xhxd) mm EAN CODE AVAILABLE ORDER NO. Metal mounting plate, Minipol 268x216x IMMM0032 Metal mounting plate, Minipol 358xx IMMM0043 Metal mounting plate, Minipol 358x360x IMMM0044 Metal mounting plate, Minipol 458x360x IMMM0054 Metal mounting plate, Minipol 558x360x IMMM0064 Metal mounting plate, Minipol 558x460x IMMM0065 Metal mounting plate, Minipol 754x556x IMMM0086

12 INSTALLATION INSERT FOR MINIPOL 25 DESCRIPTION EAN CODE AVAILABLE ORDER NO. Installation insert for x 2x12 M IMCH0043 Installation insert for x 2x18 M IMCH0044 Installation insert for x 3x18 M IMCH0054 Installation insert for x 3x18 M IMCH0064 Installation insert for x 3x23 M IMCH0065 Installation insert for x 4x29 M IMCH0086 Installation insert for x 5x29 M IMCH0586 MINIPOL INTERIOR DOORS DESCRIPTION EAN CODE AVAILABLE ORDER NO. Interior doors x IMPI0044 Interior doors x IMPI0054 Interior doors x IMPI0064 Interior doors x IMPI0065 Interior doors x IMPI0086 I KNO HERE TO FIND IT! THE SCHRACK TECHNIK EB SHOP ITH NAVIGATOR.SCHRACK.COM Finding product information made easy Buying products around the clock Quick access customer service

13 26 KS FLOOR-MOUNTED ENCLOSURES Type key KS Compact enclosure K S Height idth Depth Design 0 = single leaf, incl. mounting plate 1 = single leaf, w/o mounting plate 2 = double leaf, incl. mounting plate 3 = double leaf, w/o. mounting plate KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS S KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS KS Material: Frame: Sheet steel 1.5 mm Doors: Sheet steel 2 mm Rear panel: Sheet steel 1.5 mm Roof: Sheet steel 1.5 mm Mounting plate: Sheet steel, glavanised 3 mm Frame: Rounded profile, seam-welded Doors: Hinges can be attached on left or right, reinforced frame Rear panel: Removable Lock: Self-positioning 4 point rod lock for single doors and 3 point rod lock for s 5 mm double-bit insert comes as standard Mounting plate: Double-folded profile. Depth can be adjusted in 25 mm steps. Enclosures 1 mm in width are supplied with two mounting plates. Surface: powder-coated RAL 7035 Degree of protection: : IP 66 / NEMA 4 : IP 55 / NEMA 12 Included in delivery: Enclosure with pre-fitted doors with 5 mm semicylinder two-way lock and reinforced profiles, roof, cabel entry plates, rear panel and mounting plate, earthing bolts, keys and assembly instructions

14 KS FLOOR-MOUNTED ENCLOSURES continued DESCRIPTION DIM. (xhxd) mm EAN CODE AVAILABLE ORDER NO. SINGLE DOOR ITH MOUNTING PLATE 1xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS xx KS SINGLE DOOR ITHOUT MOUNTING PLATE without MPL 1xx KS without MPL 1xx KS without MPL 1xx KS without MPL 2000xx KS DOUBLE DOOR ITH MOUNTING PLATE 1xx KS xx KS x1200x KS xx KS x1200x KS x1200x KS x1x KS x1x KS xx KS xx KS x1200x KS x1x KS x1200x KS x1x KS x1x KS DOUBLE DOOR ITHOUT MOUNTING PLATE without MPL 1xx KS without MPL 2000xx KS without MPL 2000x1200x KS