[ SOLUTIONS FOR AUTOMATION & CONTROL DEVICES: ]

Transcription

1 [ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES remove and -install hinge pins style hinge pins Furnished hardware kit includes solid washers for wallmounting, key hole plugs SPEIFIATIONS APPLIATION Automotive Packaging Material handling Tool and machine External formed body flange Seamless foam-in-place gasket Grounding studs system onductive panel available integrated as an option or as an accessory Solution with gland plate Weatherproof paint available on request FINISH SOPE OF DELIVERY Enclosure with hinged door Gland plate(s), supplied loose (for items with gland plate) Mounting plate, supplied loose (for items with mounting plate) Assembly kit Installation instruction For other general accessories, please refer to the chapter Accessories. MILD STEEL

2 STANDARD PRODUT H W D Door thickness Body thickness Gland Plate P Type A A B A A B B B B Q onductive mounting plate Solution with mounting plate included B MILD STEEL

3 [ SOLUTIONS FOR AUTOMATION & ONTROL DEVIES: ] INDUSTRY STANDARDS Mounting brackets required to meet UL/SA external mounting requirements. FEATURES Hinged cover type is designed for automation and control devices Three-point locking system Furnished hardware kit includes solid washers for wallmounting, key hole plugs SPEIFIATIONS Seamless, foam-in-place gasket Grounding studs system Solution with gland plate Weatherproof paint available on request APPLIATION Automotive Packaging Material handling Tool and machine FINISH SOPE OF DELIVERY Enclosure with hinged door Gland plate(s), supplied loose (for items with gland plate) Mounting plate, supplied loose (for items with mounting plate) Assembly kit Installation instruction For other general accessories, please refer to the chapter Accessories. MILD STEEL

4 STANDARD PRODUT H W D Door thickness Body thickness Type Gland Plate P Q onductive mounting plate Solution with mounting plate included Q 20,5 W W-41 (BODY OPENING) M8 x 1,25 D Y 25, W 19.1 W-38, H H-41 (BODY OPENING) H H-38, A B P Y-Y D-33.4 Y MILD STEEL

5 [ MOUNTING PLATE ] Thickness A B [ GLAND PLATE ] Provide a removable cable egress and entry plate while maintaining IP/UL/ textured light-gray polyester powder paint Gland plate for wallmount P Q Type A gasket, fasteners and instruction provided. Gland plate for wallmount B when properly installed. Gland plate for wallmount [ DOOR BARS ] H L Two bars in one set [ DOOR STOP KIT ] Enclosures must have a W dimension mounted at the top or bottom of the door body of the enclosure and two small holes in the door. The angle of the door is easily adjusted by means of a wingnut, and the stop arm slides neatly out of the way when ADSTOPK mild steel [ ] non-metallic [ ] are required to maintain UL/SA external mounting requirement. MFK MTGFT MILD STEEL

6 [ DATA POKET ] Data Pockets provide convenient storage for wiring diagrams, operation manuals and other documentation inside an enclosure. onstructed of high-impact thermoplastic, pockets are dark gray and have cutout areas for easy access and visibility to contents. Delivered with self-adhesive tape for mounting option without welded studs. [ GROUNDING KIT ] Grounding Kit provides means to attach a grounding conductor to the enclosure. Kit inludes two insulated copper wires with a ring terminal at each end, all installation hardware and instructions. Grounding kit [ LOK INSERTS ]. systems provide maximum protection for your equipment. MKSLOT Insert slotted [ DUST UP ]. MKDUST [ HANDLES ]. MKWN MKWNKEY MKLH Wing Knob non locking [ DIN RAIL MOUNTING KIT ] H or W of enclosure MILD STEEL

7 [ SOLUTIONS FOR TERMINAL INSTALLATIONS: SMALL SIZES, SREW OVER ] INDUSTRY STANDARDS Solid screw cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES Integral compression stops maintain optimal gasket compression Furnished hardware kit includes solid washers for wallmounting, hole plugs SPEIFIATIONS Mild steel solution constructed from doors thickness Seamless foam-in-place gasket Grounding studs system Weatherproof paint available on request FINISH APPLIATION Automotive Packaging Material handling Tool and machine SOPE OF DELIVERY Enclosure over Assembly kit Installation instruction For other general accessories, please refer to the chapter Accessories. MILD STEEL

8 STANDARD PRODUT Steel Enclosure H W D Door thickness Body thickness onductive mounting plate Solution with mounting plate included Y-Y 9.2 W 32.3 W-64, D D-16,7 Y 8.8 W B W-16,1 (OPENING) M5 H H-18,4 H-16,1 (OPENING) Y H 8,8 A A-16 MILD STEEL

9 [ SOLUTIONS FOR TERMINAL INSTALLATIONS: SMALL SIZES, ONE LOK SYSTEM ] INDUSTRY STANDARDS Solid hinged cover models. Mounting brackets required to meet UL/SA external mounting requirements. FEATURES Hinged cover type is designed for terminals installation Furnished hardware kit includes solid washers for wallmounting, hole plugs SPEIFIATIONS Seamless, foam-in-place gasket Grounding studs system Solution without gland plate Weatherproof paint available on request FINISH APPLIATION Automotive Packaging Material handling Tool and machine SOPE OF DELIVERY Enclosure with hinged door Mounting plate, supplied loose (for items with mounting plate) Assembly kit Installation instruction For other general accessories, please refer to the chapter Accessories. MILD STEEL

10 STANDARD PRODUT H W D Door thickness Body thickness onductive mounting plate Solution with mounting plate included W 32.3 W-64.6 D Y-Y (1 : 1.5) D-16.2 W H H H-17.2 (OPENING) W-17.2 (OPENING) M5 Y Y 13.3 H A 8.7 A B MILD STEEL

11 [ MOUNTING PLATE ] Thickness A B [ DIN RAIL MOUNTING KIT ] Uses as a mounting framework to install additional space in front of or behind mounted equipment. Mounting hardware included. Item number DIN moun. Brackets H or W of enclosure DIN moun. Brackets DIN moun. Brackets DIN moun. Brackets DIN moun. Brackets [ ] required to meet UL/SA external mounting requirements. LMFK [ GROUNDING KIT ] Grounding Kit provides means to attach a grounding conductor to the enclosure. Kit inludes two insulated copper wires with a ring terminal at each end, all installation hardware and instructions. Grounding kit MILD STEEL

12 [ ] INDUSTRY STANDARDS APPLIATION electronic equipment. The enclosures are designed to provide They provide protection against water, dirt, corrosive agents and other contaminants. PROTEK is an excellent choice for applications where space is at a premium and the only option is wall mounting. PROTEK comes in a broad range of sizes, materials SOPE OF DELIVERY Enclosure with hinged door Assembly kit Installation instruction FEATURES three-part design: door, center section and wall section Solid door provides complete physical and visual protection Window door, made of scratch-resistant safety glass, provides visual monitoring of internal equipment while maintaining equipment protection All seams are fully welded and ground smooth Doors, center section and wall section are provided with ground studs to facilitate proper bonding and grounding of the enclosure Premium seamless, foam-in-place gasket prevents contaminants from entering the enclosure Keylocking wing knob is included on painted steel enclosure, providing access control to the enclosure; two keys are included with each enclosure One set of plated, self-grounding, square hole rack angles per EA universal spacing standards, which can be adjusted frontto-back. SPEIFIATIONS safety glass abgedeckt. Foam-in-place gasket made of durable polyurethane FINISH textured polyester powder paint LOAD RATING enter hinged section: Height Maximum Load Rating For other general accessories, please refer to the chapter Accessories. MILD STEEL

13 Rack Units F P Q S Optional Steel Panel MILD STEEL

14 A x B x Rack Units F P Q S Optional Steel Panel MILD STEEL

15 MILD STEEL

16 PROTEK AESSORIES [ ] Keylocking quarter-turn wing knob latch. existing cam for installation; cam is not included with wing knob. an be locked in open or closed position. Maintains Use with PTWK Keylocking wing knob, quarter-turn AESSPLUS, OMLINE, PROTEK, L-Box [ ] Where equipment mounting space is limited, Accessory Panels increase enclosure capacity by providing a accessories at the back of the enclosure. The panels mount on collar studs provided in the enclosure. Available in painted mild steel or wood. Item number Panel Type Painted Steel Painted Steel Painted Steel Panel Size D x E Thickness Painted Steel Painted Steel [ GROUNDING KIT ] Grounding Kit provides means to attach a grounding conductor to the enclosure. Kit inludes two insulated copper wires with a ring terminal at each end, all installation hardware and instructions. Grounding kit MILD STEEL

17 [ ] INDUSTRY STANDARDS Mounting brackets required to meet UL/SA external mounting requirements. APPLIATION make them durable in corrosive environments, yet aesthetically pleasing. orner latches provide unobstructed access. The continuous hinge provides a secure seal, and double latching creates added security. SOPE OF DELIVERY Enclosure over (solid/window) Assembly kit Installation instruction FEATURES and temperature-resistance qualities and exhibits excellent weatherability and physical properties Scratch-resistant polycarbonate windows are permanently bonded in place Enclosures with quick-release latches have corrosion-resistant polyester latches located in corners that provide unobstructed access to enclosure Padlock provisions included in each latch SPEIFIATIONS Gasket assures water-tight and dust-tight seal Polyester mounting brackets and stainless steel attachment screws are provided with each enclosure Molded-in-place threaded brass inserts and plated steel screws are provided for mounting optional panels and terminal block kits stainless steel hinge pin -cover enclosures are secured with two captivated Type steel FINISH Fiberglass material is light-gray inside and out. Optional steel panels are painted white. Optional stainless steel, aluminum, conductive and composite panels are unpainted. For other general accessories, please refer to the chapter Accessories.

18 AxBx Type over Quick Release over Quick Release over Quick Release over Quick Release over Quick Release over Quick Release over Quick Release Steel Panel Alum. Panel Panel Size D x E Mounting G x H Overall L x W F J K O P Q T U Purchase panels separately. Optional stainless steel, aluminum, conductive and composite material panels available for most sizes. AxBx Type Steel Panel Alum. Panel Panel Size D x E Mounting G x H Overall L x W F J K M N O P Q T U over Quick Release over Quick Release over Quick Release over Quick Release over Quick Release over Quick Release over Quick Release Purchase panels separately. Optional stainless steel, aluminum, conductive and composite material panels available for most sizes.

19 FIBERGLASS

20 FIBERGLASS, AESSORIES [ ] screw-hole plugs are included in each package. Supplied with ontinuous Hinge, Kit Qty. Quick-Release Kit Fiberglass Hinged over WiFi Enclosures, enclosures to quick-release without Padlocking provision is included. [ FIBERGLASS MOUNTING BRAKET KIT ] reinforced polyester. Kit includes four brackets, hardware and installation instructions. Mounting hole dimensions with mounting brackets installed are: See - or Hinged-over with Quickdimensions. [ ] The Swing-Out Panel Kit provides solution for installing frontmounted panels in ontinuous Fits Enclosure A x B () Fits Enclosure A x B () No drilling required.

21 POLYARBONATE [ ] INDUSTRY STANDARDS Polycarbonate Enclosure APPLIATION QLINE D polycarbonate enclosures have contoured bodies with flush cover screws for an attractive, contemporary appearance. Tough as well as stylish, they are functional in corrosive environments and can withstand occasional submersion. SOPE OF DELIVERY Assembly kit FEATURES Body is impact-resistant polycarbonate Straight side walls permit ganging of multiple enclosures over screws protected by removable caps that are aesthetic and provide tamper resistance SPEIFIATIONS and clear covers are impact-resistant polycarbonate ross-point captivated cover screws are stainless steel Mounting holes molded directly adjacent to cover screws Molded internal pads for mounting optional panels, rails and other components Panel mounting feature on both body and cover Seamless foam-in-place gasket assures water-tight and dusttight seal s provided for mounting optional panel Material is halogen free FINISH Optional panels are plated steel. For other general accessories, please refer to the chapter Accessories.

22 POLYARBONATE AxBx / over Style External Dimensions L x W / lear lear lear lear lear Panel Panel Size D x E / Mounting G x H / F / J / K / P / Q / R / S / U / lear lear lear lear lear lear lear lear lear lear lear A x B x are internal dimensions. Purchase panels separately.

23 POLYARBONATE

24 POLYARBONATE, AESSORIES [ HINGE KIT ] Hinge Kit includes two polyamide hinges, flat washers and drilling templates. Use on all QLINE D enclosures. Hinge Kit meets QDEHK [ MOUNTING BRAKET KIT ] Mounting Bracket Kit has four QDMFK installable. Use on all QLINE D enclosures. Maintains listed ratings for enclosure. [ HARDWARE KIT ] Hardware Kit includes six self-tapping, stainless steel cover screws, four selftapping plated panel screws and six QDHK screws to provide tamper resistance as well as a clean aesthetic appearance. This or damaged hardware originally furnished with the enclosure. [ PANELS ] Panel Size D x E / Mounting G x H /

25 POLYARBONATE [ ] INDUSTRY STANDARDS Polycarbonate Enclosure APPLIATION The largest-sized QLINE enclosure, QLINE I provides easy access and protects larger controls from corrosive environments. hoose from screw cover, hinge, internal mounting, variable depth and quick-release latch options to meet your design and security requirements. SOPE OF DELIVERY Assembly kit FEATURES Body is impact-resistant polycarbonate Molded internal rails for mounting adjustable-depth panel kit over Enclosures have easy-to-remove covers attached to body with strong, durable polyamide cross-point cover screws. Enclosures with Quick-Release es have polycarbonate hinges and polyester latches with a padlock provision. SPEIFIATIONS and clear covers are impact-resistant polycarbonate Mounting holes molded directly under cover screws Molded internal pads for mounting optional panels, rails and other components s provided for mounting optional panel Optional extension rings are molded polycarbonate over includes a molded-in hole for wire lead Seamless foam-in-place gasket assures water-tight and dusttight seal Material is halogen free FINISH out. Optional panels are plated steel. For other general accessories, please refer to the chapter Accessories.

26 POLYARBONATE A x B x / over Style over Fastener External Dim s L x W / Panel Panel Size D x E / Extension Ring Mounting G x H / F / P / Q / R / S / T / U / Y / Z / over lear over over lear over over lear over over lear over over lear over over lear over over lear over over lear over over lear over over lear over over lear over over lear over over lear over over lear over lear lear lear

27 POLYARBONATE A x B x / over Style over Fastener lear lear lear lear lear lear lear lear lear lear lear External Dim s L x W / Panel Panel Size D x E / Extension Ring Mounting G x H / F P / / Q / R / S / T / U / Y / Z / A x B x are internal dimensions. Purchase panels and extension rings separately.

28 POLYARBONATE QLINE I Type 4X Enclosures with Quick-Release es

29 POLYARBONATE QLINE I Type 4X Enclosures with over

30 POLYARBONATE, AESSORIES [ OVER SREW KIT ] s are polyamide. Wing-head-style screws provide rapid access to enclosure interior without requiring special tools to open. Kit includes four polyamide cover screws and four self-tapping, plated panel screws. Tamper-resistant screws have four cover screws, one key and four selftapping, plated panel screws. Use on all QLINE I enclosures. QIWHSK QITSK wing-head screw double-bit [ BRASS INSERT KIT ] into molded pads in bottom of enclosure. QBIK [ PANEL DEPTH FITTING ] Panel Depth Fitting attaches to corner molded rails of enclosure to facilitate full-range front-to-back panel adjustment. QIPDF and plated screws. Use on all QLINE I enclosures. [ SWING PANEL ] Adjustable-depth aluminum swing panels, for use in QLINE I polycarbonate enclosures, provide a convenient way to install controls and instruments near enclosure body opening while providing access and security. Item number Panel Size D x E / Fits Enclosure Size A x B / Hinged Side of Enclosure

31 POLYARBONATE, AESSORIES [ HINGE KIT ] Hinge Kit includes two polyamide hinges, flat washers and drilling template. Use on all QLINE I enclosures. QIHK [ MOUNTING BRAKET KIT ] Mounting Bracket Kit has four QIMFK installable. Use on all QLINE I Enclosures. Maintains listed ratings for enclosure. [ HARDWARE KIT ] Hardware Kit includes four polyamide cover screws and four self-tapping, plated panel kit for lost or damaged hardware originally furnished with the enclosure. [ EXTENSION RINGS ] Extension rings can be added to QLINE I to enclosure depth. Extension rings are polycarbonate and cannot be used with quick-release latches. Use with Enclosure Item number Beginning With [ PANELS ] Panel Size D x E Panel Size D x E

32 NOTES :

33 [ ] INDUSTRY STANDARDS NEBS is a trademark of Telcordia FEATURES Foam-in-place gasket Optional door stop/wind latch holds door in place during service Two door/hinge styles available: - Easily removable door with hidden hinge and retained hinge - Heavy-duty continuous hinge door. Maximum door load Optional solar shield top SPEIFIATIONS APPLIATION Lightweight, corrosion-resistant OMLINE aluminum wall-mount enclosures provide long-lasting protection for housing electrical components in extreme outdoor environments. These customizable enclosures employ a foam-in-place gasket for a tight seal and are SOPE OF DELIVERY Enclosure with hinged door Assembly kit Installation instruction appearance Bonding provision on door; ground stud on body FINISH out. A x B x A x B x Points Door Thickness Door Thickness Std. Pkg. (kg) For other general accessories, please refer to the chapter Accessories. ALUMINUM

34 ALUMINUM ENLOSURES: OMLINE A x B x AxBx Points Door Thickness Door Thickness Std. Pkg. kg ALUMINUM