Weatherproof Boxes, Covers, Lampholders and Lighting Fixtures
|
|
|
- Marilyn Madison Carr
- 6 years ago
- Views:
Transcription
1 Applications Use in branch circuit wiring for wet, damp or dry locations. May be used as a junction box or a device box for switches, receptacles, GFCIs, etc. Lampholders are for use in exterior and interior applications to provide safety and security for driveways, doorways and walkways. Lighting fixtures are for use in areas where moisture ingress is a concern such as construction sites, tunnels, bridges and subways. Features Rugged continuous and seamless diecast construction prevents entry of dirt, dust and moisture. Polyester powder coating is applied for uniform cosmetic coating and weatherproof durability. Mounting can be achieved with mounting lugs (provided) or by using the integral mounting knockouts. Smooth, accurately tapped hubs prevent wire abrasion. Clear UL marking and volumetric marking cast into each box and extension ring facilitate electrical inspection. Continuous box and cover compression ensure complete sealing at gasket interface to prevent moisture entry. Lockable covers and covers with integral devices are offered. Closure plugs (2), mounting lugs (2) and green ground screw provided with each box. Mounting hardware and gasket provided with each cover. Locking swivel knuckle on lampholders permits positive lamp positioning and accurate directional aiming. Lampholders are supplied with all hardware including locknuts, porcelain sockets and internal gaskets for reliability and weather protection. Photocells and lampholders are supplied with long leads (4 from the end of the knuckle) to facilitate wiring. Lighting fixtures are factory assembled and fully gasketed to ensure fast and easy installation. Complete installation instructions are provided with each item. In-Use covers include patented inserts and comply with NEC requirements. Lighting fixtures are individually boxed, labeled and bar coded for ease of handling and identification. Standard Materials Boxes, extensions, covers, lamp-holders, lighting fixtures, and closure plugs: diecast aluminum In-use covers: polycarbonate or diecast aluminum Lugs: stamped aluminum (one- and two-gang boxes), integrally cast (round boxes) Cover screws: plated steel Gaskets: closed cell foam (covers), fiber (lampholders), closed cell foam or fiber (lighting fixtures) Glass: annealed glass Sockets: porcelain (lampholders and lighting fixtures) NEC/CEC Certifications and Compliances UL Standard: 514A, 514D, 1598 as applicable UL Listed: E2527, E53330 CSA Standard: C22.2 No. 18.1, C22.2 No as applicable cul Listed: E2527 NEMA: FB-1, OS-1 Most of the boxes, covers and lampholders are individually shrink wrapped, labeled and bar coded for ease of handling and identification. Sturdy corrugated boxes with easy lift-off top with shrink wrapping facilitate merchandising. 522
2 One-Gang Weatherproof Outlet Boxes and Extensions Closure plugs, ground screw and mounting lugs included. Depth Wiring Cubic Inch Capacity Hub Size No. Of Hubs /2 4 WSL /4 4 WSL /2 3 WSM /4 3 WSM WSM110 COMMERCIAL AND INDUSTRIAL FITTINGS: WEATHERPROOF BOXES, COVERS AND LIGHTING FIXTURES /2 5 WSP /4 5 WSP /2 5 WSX /4 5 WSX WSX / /2 3 WDM / /4 3 WDM / WDM110 number shown represents gray color. White (Suffix -W) and Bronze (Suffix -B) also available. Consult local sales representative for lead time. 523
3 One-Gang Weatherproof Outlet Boxes and Extensions Closure plugs, ground screw and mounting lugs included. Depth Wiring Cubic Inch Capacity Hub Size No. Of Hubs 2-5/ /2 5 WDX / /4 5 WDX / WDX WE1 1-1/ /2 4 WEFX50 1-1/ /4 4 WEFX75 524
4 One-Gang Box and Extension Dimensions Closure plugs, ground screw and mounting lugs included. 2.88/73.2 (2.88) End View One Outlet 83.3(3.28) 3.28/ /117.6 (4.63) D C E F G A 3.50/88.9 (3.50) /65.0 (2.56) 2.75/69.9 (2.75) 5.25/133.4 (133.4) H B C D J End View Two Outlets Extensions and Extension Adapters are used to provide additional capacity needed for NEC box fill requirements. Adapters allow installer to add takeoffs to new boxes and/or devices. COMMERCIAL AND INDUSTRIAL FITTINGS: WEATHERPROOF BOXES, COVERS AND LIGHTING FIXTURES 1.00/25.4 (1.00) 1.50/ Extension E1 Flanged Extension Adapter: WEFX50, WEFX75 A B C D E F G H J (2.81) 50.8 (2.00) 17.5 (0.68) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) 36.5 (1.43) WSL (2.81) 50.8 (2.00) 17.5 (0.68) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) 36.5 (1.43) WSL (2.81) 50.8 (2.00) 17.5 (0.68) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WSM (2.81) 50.8 (2.00) 17.5 (0.68) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WSM (2.81) 50.8 (2.00) 17.5 (0.68) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WSM (2.81) 50.8 (2.00) 17.5 (0.68) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) 36.5 (1.43) WSP (2.81) 50.8 (2.00) 17.5 (0.68) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) 36.5 (1.43) WSP (2.81) 50.8 (2.00) 17.5 (0.68) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WSX (2.81) 50.8 (2.00) 17.5 (0.68) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WSX (2.77) 50.8 (2.00) 17.5 (0.68) 86.4 (3.40) (3.94) 47.8 (1.88) WSX (2.81) 66.8 (2.63) 19.1 (0.75) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WDM (2.81) 66.8 (2.63) 19.1 (0.75) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WDM (2.81) 66.8 (2.63) 19.1 (0.75) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WDM (2.81) 66.8 (2.63) 19.1 (0.75) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WDX (2.81) 66.8 (2.63) 19.1 (0.75) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WDX (2.81) 66.8 (2.63) 19.1 (0.75) 77.7 (3.06) 88.9 (3.50) 47.8 (1.88) WDX
5 Two-Gang Weatherproof Outlet Boxes and Extensions Closure plugs, ground screw and mounting lugs included. Depth Wiring Cubic Inch Capacity Hub Size No. of Hubs /2 7 WSK /4 7 WSK /2 4 WSL /4 4 WSL /2 3 WSM /4 3 WSM WSM /2 5 WSP /4 5 WSP /2 6 WSR /4 6 WSR
6 Two-Gang Weatherproof Outlet Boxes and Extensions Closure plugs, ground screw and mounting lugs included. Depth Wiring Cubic Inch Capacity HubSize No. Of Hubs /2 7 WST /4 7 WST /2 5 WSX /4 5 WSX WSX210 COMMERCIAL AND INDUSTRIAL FITTINGS: WEATHERPROOF BOXES, COVERS AND LIGHTING FIXTURES /2 7 WDK /4 7 WDK WDK /2 5 WDP /4 5 WDP WDP WE2 527
7 Two-Gang Box and Extension Dimensions J D C E A G L F H B K K Extension WE2 - Extensions and Extension Adapters are used to provide additional capacity needed for NEC box fill requirements. Adapters allow installer to add take-offs to new boxes and/or devices. A B C D E F G H J K L WSK250 WSK275 WSL250 WSL275 WSM250 WSM275 WSM210 WSP250 WSP275 WSR250 WSR275 WST250 WST275 WSX250 WSX275 WSX (2.66) 21.7 (0.85) WDK (2.66) (0.85) WDK (2.66) (0.85) WDK (2.66) 21.7 (0.85) WDP WDP275 (2.66) 67.8 (2.66) (0.85) 21.7 (0.85) / (4.63) / (3.75) /25.4 (1.00) 4.63/117.6 (4.63) 3.63/92.2 (3.63) WDP
8 One-Gang Weatherproof Covers Gasket and mounting hardware included. Blank Cover, 2-screws (stamped aluminum) Blank Cover, 4-screws (stamped aluminum) Universal WCB1 Universal WCB (4.51) (2.76) (2.76) 83.3 (3.28) COMMERCIAL AND INDUSTRIAL FITTINGS: WEATHERPROOF BOXES, COVERS AND LIGHTING FIXTURES 47.6 (1.87) Toggle Switch Cover Switch (10A - 20A) WCT (2.82) Toggle Switch Cover w/ switch Switch (15A, 1-pole) WCT (3.28) 60.3(2.37) (4.58) Toggle Switch Cover w/ switch Switch (15A, 3 Way) WCT (2.81) Cover with Photocell (stamped aluminum) Universal Photocell (120A, 300W) WCE (3.28) 529
9 One-Gang Weatherproof Covers Gasket and mounting hardware included. Self closing cover Self closing cover 3/16" hole for padlock Self closing cover Horizontal Duplex Recept or Switch Duplex Recept or Switch Duplex Recept or Switch WVD1 WVDL1 WHD (2.81) Stay open cover Horizontal Duplex Recept or Switch WHDO1 1 Self closing cover w/ recept Horizontal Duplex Recept WHD1WR number shown represents gray color. White (Suffix -W) and Bronze (Suffix -B) also available. Consult local sales representative for lead time. Hasp diameter 3/16. Lock not included. Not UL Listed. 530
10 One-Gang Weatherproof Covers Gasket and mounting hardware included. Self Closing Cover Self Closing Cover Horizontal Single Recept or Switch Single Recept or Switch WVS1 WHS (2.38) 72.0 (2.83) (2.38) 1 Ø 36.7 (1.42) 72.0 (2.83) Ø 36.7 (1.42) COMMERCIAL AND INDUSTRIAL FITTINGS: WEATHERPROOF BOXES, COVERS AND LIGHTING FIXTURES Self Closing Power Outlet Cover (2.125 opening) Single Recept (20A-50A) WVP (2.83) Ø WVP (2.125) Self Closing Power Outlet Cover (1.625 opening) Single Recept WVP161 1 Ø WVP (1.625) Ø WVP21L (3.81) (2.125) Self Closing Power Outlet Cover (2.125 opening) Single Recept (20A-50A) WVP21L1 Hasp diameter 3/16. Lock not included. 531
11 One-Gang Weatherproof Covers Gasket and mounting hardware included. Self closing cover Self closing cover Horizontal GFCI WHG1 GFCI WVG (1.32) (2.64) 96.8 (3.81) 71.5 (2.81) 67.1 (2.64) 96.8 (3.81) 71.5 (2.81) 33.6 (1.32) number shown represents gray color. White (Suffix -W) and Bronze (Suffix -B) also available. Consult local sales representative for lead time. 532
12 One-Gang Weatherproof Covers Gasket and mounting hardware included. Raised Cover, one 1/2 hub Raised Cover, three 1/2 hubs Universal Universal 1 Photocell or lampholder 3 Photocells or lampholders WC1150 WC (4.6) 72.5 (2.85) For horizontal to downward aiming ( with 150 W max lamp) COMMERCIAL AND INDUSTRIAL FITTINGS: WEATHERPROOF BOXES, COVERS AND LIGHTING FIXTURES (4.6) Raised Cover, two 1/2 hubs with lampholders Universal 2 Lampholders included WC12L 72.5 (2.85) 26.0 (1.02) number shown represents gray color. White (Suffix -W) and Bronze (Suffix -B) also available. Consult local sales representative for lead time. 533
13 One-Gang Weatherproof In-Use Covers with Inserts Gasket and mounting hardware included. In-Use cover, 2-7/8 deep 3/8" hole for padlock (polycarbonate) In-Use cover, 3-1/2 deep 3/8" hole for padlock (polycarbonate) Universal Clear WCIU1 Universal Clear WCDIU1 WCIU1 and WCDIU1 Inserts 3 inserts produce 14 configurations Single gang In-Use inserts can be used in both vertical and horizontal applications, by simply changing the hinge points. Provided with inserts, devices not included. 534
14 Two-Gang Weatherproof Covers Gasket and mounting hardware included. Blank Cover (stamped aluminum) Self Closing Cover Universal WCB24 Single Recept and GFCI WVSG (3.28) (3.62) (1.81) 67.6 (2.66) (1.31) Self Closing Cover Duplex Recept and GFCI WVDG (3.62) 33.5 (1.31) Self Closing Cover 2 GFCI WVGG (3.62) 67.6 (2.66) 33.5 (1.31) 536
15 Two-Gang Weatherproof Covers Gasket and mounting hardware included. Self Closing Cover Switch and GFCI WVTG (2.38) 33.5 (1.31) 67.6 (2.66) COMMERCIAL AND INDUSTRIAL FITTINGS: WEATHERPROOF BOXES, COVERS AND LIGHTING FIXTURES Toggle Switch Cover (stamped aluminum) 2 Switches (15A - 20A) WVTT (3.28) 60.5 (2.38) 537
16 Two-Gang Weatherproof Covers Gasket and mounting hardware included. Self closing cover Self closing cover 2 Duplex Recept or Switches Single Recept and Duplex Recept WVDD2 WVSD2 4 9 /16" 4 9 /16" /16" (1.81) 4 9 /16" /8" 4 9 /16" (2.38) /16" (1.81) 4 9 /16" Self closing cover 2 Single Recept or Switches WVSS (2.38) 2 3 /8" 4 9 /16" /16" (1.81) number shown represents gray color. White (Suffix -W) and Bronze (Suffix -B) also available. Consult local sales representative for lead time. 538
17 Round Weatherproof Outlet Boxes and Extensions Closure plugs, ground screw and mounting lugs included. Depth Wiring Cubic Inch Capacity Hub Size No. Of Hubs /2 5 WRX /4 5 WRX /2 5 WRX50CG /4 5 WRX75CG /2 4 WERX /4 4 WERX75 COMMERCIAL AND INDUSTRIAL FITTINGS: WEATHERPROOF BOXES, COVERS AND LIGHTING FIXTURES 5.0/ / / (5.51) 3.50/ (5.0) 88.9 (3.50) 69.9 (2.75) 88.9 (3.50) 3.50/ / (1.62) / (0.82) (4.31) /88.9 (3.50) /69.9 (2.75) /88.9 (3.50) /69.9 (2.75) 1.56/39.6 (1.56) 0.75/ (0.75) 4.12/ (4.12) WRX50 WRX75 WRX50CG WRX75CG Extension WERX50/WERX75 Extensions and Extension Adapters are used to provide additional capacity needed for NEC box fill requirements. Adapters allow installer to add takeoffs to new boxes and/or devices. number shown represents gray color. White (Suffix -W) and Bronze (Suffix -B) also available. Consult local sales representative for lead time. 541
18 Round Weatherproof Covers Gasket and mounting hardware included. Lampholders are adjustable. Porcelain sockets. Blank Cover, 4 OD (stamped aluminum) Raised Cover, One 1/2 hub Raised Cover, Three 1/2 hubs Raised Cover, two 1/2 hubs with lampholders Universal WCBR Universal Universal Universal 1 Photocell or lampholder 3 Photocells or lampholders 2 Lampholders included WCR150 WCR350 WCR2L /2" (3.50) 69.9 (2.75) 2 3 /4" Dimensions in Millimeters (3.50) /2" /4" (4.13) Additional knock-out provided for mounting to 3-1/2" Round Box /2" (3.50) 69.9 (2.75) 2 3 /4" Additional knock-outs knock-out for mounting provided to 3 1 /2" Round for box. mounting to 3-1/2" Round Box /16" (.56) /2" (4.13) Locking swivel knuckle permits lamp positioning and aiming. Supplied with porcelain sockets, gaskets, extra long leads, locknut and other hardware. For aiming horizontal or downward. with 150 W. Lampholder Unfinished Metal WLU1 3.00/76.2 (3.00) Finished Lampholder WLI /88.9 (3.50) number shown represents gray color. White (Suffix -W) and Bronze (Suffix -B) also available. Consult local sales representative for lead time. For horizontal to downward aiming with 150W max. lamp. Box not included. 542
19 Ceiling Plates and Lampholders Ceiling plate (deep) with lampholders Ceiling plate w/ beveled edge Ceiling plate w/ beveled edge Universal 2 Lampholders included White WCRD2LW Universal White WCRB3W Universal White WCRB4W 25.4 (1.00) 1" Dimensions in Millimeters 70.0 (2.75) (5.01) (5.17) 5 3 /16" 5.5 (0.21) 3 /16" Hole 4.0 (0.16) 4 1 /2" 5 1 /2" (4.50) (5.50) COMMERCIAL AND INDUSTRIAL FITTINGS: WEATHERPROOF BOXES, COVERS AND LIGHTING FIXTURES /2"(3.50) /4"(5.01) with 150W max. lamp. 543
Non-Metallic Weatherproof Boxes, Covers and Lampholders
Non-Metallic Weatherproof oxes, s and Lampholders pplications Marine rated boxes and covers are ideal for use in highly corrosive areas, beaches, docks, pools, or other wet location areas. Use in branch
Cat Description Finish. 1 Hole Plug Gray /4 Hole Plug White /4 Hole Plug Bronze /4 Hole Plug Gray 10 30
Lampholder & Bar Coded For 75 Thru 150 Watt PAR 38 Lamps Extra Long Wire Leads for Easy Hook-Up Locking Swivel Knuckle Assures Positive Lamp Positioning and Provides Pinpoint Directional Aiming Lampholder
Mulberry Metal Products Seattle Stock Sheet
Weatherproof Lampholders (catalog page B23) 30001 Die Cast Lampholders Residential Grade Aluminum 36 39 lbs. 30002 Die Cast Lampholders Residential Grade Natural 36 39 lbs. 30003 Deluxe Lampholder Gray
Weather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
FM8 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
East Central College
SECTION 262726 - WIRING DEVICES PART 1 - GENERAL 1.1 WORK INCLUDES A. Base and Alternate Bids: 1. Contractor Provide: a. Wall switches. b. Receptacles c. Device plates and decorative box covers. 1.2 RELATED
Cover more applications with the most versatile Weatherproof Covers on the market
Cover more applications with the most versatile Weatherproof Covers on the market Intermatic.com Our durable line-up of Die-cast and Plastic Weatherproof Covers offers long-lasting protection in all types
Standard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Applications Locations where receptacles are used with stationary or portable electrically operated devices such as: Lighting systems Conveyors
Saturn Cutoff. Order Code: Pole Order Code: Series Height Finish Options. Customer: Date: Project: Qty: Type: SAC Saturn Cutoff SAC
Date: Customer: Project: Type: Qty: Saturn Cutoff Order Code: SAC - - - - - - - - SAC Series SAC Saturn Cutoff Pole Order Code: - - - Series Height Finish Options Optics R Type II Distribution R Type V
Wallplates & Weather Protective Covers
SECTION C Wallplates & Weather Protective Covers Our broad offering of wallplates are the final touch for any application and are available in standard size, mid-size and oversize. Choose from a variety
Plugs and Receptacles: Hazardous Location
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Plugs and Receptacles Plugs and Receptacles: Hazardous Location Applications Locations where receptacles are used with stationary or portable
Applications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
Aluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
D2P and EWP Factory Sealed Circuit Breaker Panelboards Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
Applications Protection and control of electrical equipment and circuits such as lighting and heat tracing in hazardous locations or in damp, wet or corrosive conditions. D2P Series designed for use in
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.
FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide
Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
Covers for Cast Iron or Aluminum Device Boxes
Single Gang Blank cover for enclosing splices and taps where device not used. Sheet DS100 Flush Sheet steel DSS100 For GFI receptacles. Sheet steel DS23 GFI For square handle general use snap or toggle
Weatherproof Boxes & Covers
Two sizes: 1.96" and 2.32" diameters to cover 15A/20A Straight Blade and 15A/20A/30A Turnlok devices. Covers fit all competitive flanged inlets and outlets. Stainless steel mounting screws resist corrosion.
Aluminum and Steel Liquidtight Strain Relief Cord and Cable Connectors
Application Provide a liquidtight and strain relief termination for flexible type neoprene, hypalon, and PVC jacketed power or control cord and cable. For use in wet or dry locations sealing electrical
Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
FM7 Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount Part #: HAL-PRM-250W-HPS-220V-PT Page: 1 Made in the USA The efficient HAL-PRM-250W-HPS-220V-PT high pressure sodium
Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
Height Finish Pole Options. Mounting Lamping Finish Voltage. Metal Halide. Single. H w H070 70w H w H w 15 1 /4" (387mm) 15 3 /4"
Vektor Project: Series Reflector Mounting Lamping Finish Voltage VE Vektor R Type II Aluminum Reflector Single R5 Type V Aluminum Reflector Double M Single ' Arm M Double ' Arm W Wall T Single Fitter Type:
FCW3043 ADA FCW3045 ADA FCW3042 ADA FCW3040 ADA
FCW3043 2.5 in FCW3045 2.3 in FCW3042 2.3 in FCW3040 2.2 in 120 www.fclighting.com *Consult website for updated specification sheets regarding detailed information and performance. FC Lighting, Inc. 2012.
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2
Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers
WP Plugs and DS Receptacles For FS and FD Cast Device Boxes
WP Plugs and DS Receptacles For FS and FD Cast Device Boxes Weatherproof 3F Application: WP plugs and DS receptacles are used: wherever dust, dirt, moisture and corrosion are a problem outdoors or in locations
Pole Series. Series Reflector Lens Mounting Lamping Finish Voltage. S w S w S w S w
Type: Qty: QHO Series Reflector Lens Mounting Lamping Finish Voltage QHO Quadro HO R Type II Aluminum reflector R5 Type V Aluminum reflector L S Project: Flat Glass Sagged Glass Series Reflector Lens Mounting
P-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
P-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant Applications Protection and control of electrical equipment and circuits
ORDERING INFORMATION: 120 Volts (120)
Bull38 A weather tight unit fabricated from durable grade die-cast aluminum & fully sealed, gasketed glass lens. Mount: 1/2 threaded adjustable knuckle mount Porcelain medium base socket Thermoset polyester
1400 Architura RGB Outdoor Linear LED
1400 Architura RGB Outdoor Linear LED Features LEDs deliver even diffused light without LED images DMX input color control Life >50,000 hours (LM79) Construction Extruded aluminum housing. Diecast endcaps.
Steel Enclosures Contents
Contents 12/001 - Type S1GK and GK/SD steel enclosures for industrial control use Type CS and GKP steel enclosures for standard starters Page 12/002 12/002 Type S3GK and GK/DW weatherproof steel enclosures
1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC
1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC Part #: MHFL-1000W Made in the USA The powerful and efficient MHFL-1000W metal halide light fixture from Larson
LB125A 1-1/4" LB Form 5 Aluminum Conduit Body. Dimensions and Weight STUD SIZE #10; 0.97 INCH LENGTH; INSULATION SUPPORT
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 LB125A 1-1/4" LB Form 5 Aluminum Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse Power Pedestal
DRILL \ PUNCH OUT TO SIZE REQUIRED DRILL \ PUNCH OUT TO SIZE REQUIRED Lighthouse Power Pedestal - Specifications Lighthouse Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 13.67" (347.22 mm)
T38 1" T Form 7 Malleable Iron Conduit Body. Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T38 1" T Form 7 Malleable Iron Conduit Body Appleton/Oz Gedney Catalog Number Manufacturer Description Weight per unit
AFL FLOODLIGHT SERIES
AFL FLOODLIGHT SERIES A FL Flood Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 598A Marine Outside Type Zone 2, Groups IIA, IIB & IIC CUL Cast Aluminum
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires Class I, Division 1 and 2, Groups C, D Class I, Division 1 and 2, Groups B, C, D Applications Ideal for use in chemical and petrochemical plants, such as manufacturers
IEC 309 Plugs, Connectors, Receptacles, and Inlets
IEC 309 Plugs, Connectors, Receptacles, and Inlets Applications: Where complete protection against dirt, dust, and water jets is required In damp or corrosive locations In areas prone to vibration, hard
8.11 IN Length X 8.11 IN Width X 19-1/2 IN Height
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Catalog Number Manufacturer Description Weight per unit Product Category Features Material Number of Outlets Material,
Hubbell Marine Isolation Transformers 15 kva and 25 kva Models
Shore Power System 15 kva and 25 kva Models Protects Sensitive Equipment on Board Virtually Eliminates Potential for In-Water Stray Current Can be wired per ABYC E-11 for either a Polarization or Isolation
LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
Rigid PVC Conduit Fittings & Accessories. For Use in Above Ground, Underground and Encased Installations
Rigid PVC Conduit Fittings & Accessories For Use in Above Ground, Underground and Encased Installations RIGID PVC CONDUIT FITTINGS AND ACCESSORIES A rigid, non-metallic integrated system of couplings,
EDS Factory Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof UNILETS for Use with Threaded Metal Conduit.
UNILETS for Use with Threaded Metal Conduit. Class I, Division 1 and 2, Groups B, C, D Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and disconnect
Type 4 Panel Enclosures
Type 4 Free-Standing ata Sheet Finish Wash and phosphate undercoat ANSI 61 gray polyester powder finish Accessories Full and half panels Side and swing panels Channel mounting hardware Equipment rack mounts
HID/AREA: NEC/CEC EXPLOSIONPROOF. Applications. NEC/CEC Certifications and Compliances
Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Applications Ideal for use in chemical and petrochemical plants, such as
Series Optics Mounting Lamping Finish Voltage. H039T6 1 39wT6 H w. H w. (T6 only available with MA and MS refractors) 12 3 /8" (314mm)
Project: Type: Qty: TC _ Series Optics Mounting Lamping Finish Voltage _ Options Series TC Triangular Column Optics Height Lamping Finish Voltage Options MA Type III MTR 5* Refractor MS Type V MTR 5* Refractor
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
Project: Type: Qty: SA1L. Optics Mounting Light Engine CCT Finish Voltage Options. Series SA1L-XX-1-NH SA1L-XX /2" O.D.
Saturn LED Project: Type: Qty: SAL Series Optics Mounting Light Engine CCT Finish Voltage Pole Series Height Finish Pole Options Option Series SAL Saturn LED Optics Mounting Light Engine CCT Finish Voltage
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Lighting Induction Code Master 2 Factory Sealed Induction Lighting System NEC/CEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
EB SERIES INSTRUMENT ENCLOSURES
EB SERIES INSTRUMENT ENCLOSURES EB Series Instrument Enclosures 1 5 2 7 4 6 Multiple-fold 1 gutter type edge provides extra stability and protects against dirt and water when enclosure is opened. Grounding
Everline LED Fixtures & Retrofit Kits
Everline LED Fixtures & Retrofit Kits Making It Easy to Upgrade to LED Technology Upgrading from a traditional lighting system to LED lighting just makes sense (e.g. more energy savings, less spent on
Project: Type: Qty: QH2L. Options QH2L 27 3 /8" 23 3 /16" 3 1 /2" O.D. Pole. Options
Quadro H LED Project: Type: Qty: QHL _ Series Mounting Optics Light Engine CCT Finish Voltage Option _ Pole Series Height Finish Options Series Mounting Optics Light Engine CCT Finish Voltage QHL Quadro
1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens
1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens Part #: HALPRM-1000WMH Made in the USA The extremely durable Larson Electronics HALPRM-1000WMH metal halide
www.greenelectricalsupply.com Dimensions not to scale 4.4 Width 6.75 ; with latches 7.33 2 ; 27.68 4 ; 51.65 8 ; 100 Lengths, nominal; actual AVAILABLE Simkar is proud to offer fixtures that comply to
Form 7 Iron Conduit Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Eaton Corp. - Marina Power and Lighting, Inc. General Specifications for Lighthouse-SS Power Pedestals
Lighthouse-SS Power Pedestal Dimensions Height: 44.00" (1117.60 mm) Width: 9.565" (242.95 mm) Depth: 9.875" (250.83 mm) Lighthouse-SS Base Diagram Ø0.50" MOUNTING HOLE (TYP.) 9.5625" 8.0625" 7.3125" C:\Documents
EFS Non-Sealed Tumbler Switches Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw.
Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground Screw. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles
AM-Tite Series Non-Metallic Plugs MSR Series Switched and Interlocked Receptacles Compatible with UL 1686 C1 Pin & Sleeve Devices Safer. Easier. Better. MENNEKES Non-Metallic MSR Switched and Interlocked
Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Plugs
Pauluhn ZPL explosionproof LED luminaires For drilling and marine applications
Pauluhn ZPL explosionproof linear LEDs are designed to replace fluorescent T12, T8 and T5HO lighting on marine vessels and land-based and offshore drilling platforms. The rugged and durable design features
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
Switch & Outlet Boxes Technical Data
Switch & Outlet Boxes Technical Data General Information: A box, with or without a bracket or bar hanger, intended for support of a fixture/luminaire weighing 50 lbs. or less is marked FOR FIXTURE/ LUMINAIRE
Mipco Connections for Refrigerated Containers. No One Does It Like Mipco. The Mipco. Advantage. Reliability. Safety. Easy Installation & Service
No One Does It Like Mipco Mipco Interlocked Reefer Power Outlets are used extensively in port terminals and shipboard applications to provide a safe, watertight electrical connection for refrigerated containers.
Predator Medium Floodlight Wet Location
Predator Medium Floodlight Wet Location Installation and Maintenance Manual AFTER INSTALLATION DELIVER THIS MANUAL TO OWNER IMPORTANT SAFETY INSTRUCTIONS -READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
ATEX/IECEx: Zone 2 and 22 II 2 GD Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial,
Lighting: Explosionproof Area HID. Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
Perimaliter Wallpacks
Perimaliter Wallpacks Perimaliter III PVL3 / PGM3 Perimaliter II PGL Solutions for Perimeter/Area Lighting Perimaliter Wallpacks The Perimaliter wallpack has been the design leader in refractor wallpacks
Recreational Vehicle Park Electrical Products & Accessories
Recreational Vehicle Park Electrical Products & Accessories 2 MILBANK OVERVIEW Milbank Overview Energy At Work since 1927 Milbank designs and manufactures electrical solutions that move and manage power
L Listed FEATURES. Series Lamps Wattage # of Lamps ICR= remote fixture 7= 7.2 watts. L Listed. Phantom TM FEATURES
ICR-2 Remote Series FEATRES The ICR-2 Series remote emergency lighting fixture features a contemporary, elegant design in a compact thermoplastic housing. Attractive and versatile, the ICR-2 Series fixtures
SURFACE/CEILING & SUSPENDED MOUNT INSTALLATION
SURFE/CEILING & SUSPENDED MOUNT INSTALLATION E477827 E477827 APPLICATION NL luminaires are designed for use indoors, outdoors, wet locations, areas containing moisture, dirt, corrosion, vibration and rough
LED LINEAR QUICK SUMMARY CO W SI MODEL CORTANA
LED LINEAR CORTANA This simple and elegant suspended LED linear light with wide optics is ideal for general uniform ambient lighting applications where clean, modern architectural design is required. Use
6.2. Power Pedestals. Contents
Power Pedestals.2 Power Outlet Panels Contents Description Page Product Overview................................. 287 Application Description.......................... 288 Features and Benefits...........................
Product Description. Junction Boxes...V1-V23 Meter and Instrument Enclosures...V24-V33
SECTION V INDEX Product Description Page Number Junction Boxes......................................V-V2 Meter and Instrument Enclosures.......................V24-V Control Centers.....................................V4-V9
PGL350P W PS Wallpack
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 PGL350P1281 350W PS Wallpack Hubbell Lighting, Inc. Catalog Number Manufacturer Description Weight per unit Product Category
Hubbell Lighting Expressline Family 2009
Hubbell Lighting Expressline Family 2009 LIGHTING SOLUTIONS ExpressLine by Hubbell Lighting The name Hubbell has long been associated with quality products sold through the Electrical Distribution Channel.
Hazardous Factory Sealed Control Devices
Hazardous Factory Sealed Control Devices Description Page No. Application/Selection 428, 429 Dimensions 40 Manual Motor Starting Switches & Enclosures EDS Series 440, 44 Pilot Lights EFS Series 45 Pilot
Driver Info. Construction Thermal Management: Superior thermal management with die-cast aluminum heatsink. Ambient Temperature:
WP3LED55 Project: Type: Prepared By: Date: 82W, 65W and 55W LED wallpacks. Available with up to 9,000 lumens and 121 LPW. Up to 100,000 hour L70 lifespan. 5-Year Warranty. Color: Bronze Weight: 16.8 lbs
Material, Color, and Finish Color Gray 0 Zinc Electroplate/Chromate/Epoxy Powder Coat
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 T37 1 T FM7 CND BD Appleton/Oz Gedney Catalog Number T37 Manufacturer Appleton/Oz Gedney Description FM7 Unilets Type
Industrial Areamaster LED Flood/High Bay Luminaires For Ordinary Locations. 250 W, 400 W, 750 W HID Light Level Equivalent
NEC/CEC: Type 3R, 4X IP66, IP67 Suitable for use in Wet Locations Marine Outside Type (Salt Water) Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production
AUTHENTIC LIFE SAFETY PRODUCTS SINCE 1940
AUTHENTIC LIFE SAFETY PRODUCTS SINCE 1940 NEMA 4X C1D2/C2D1 INDUSTRIAL HIGH LUMEN LED EMERGENCY LIGHT DUAL-LITE.COM INNOVATIVE LED NEMA 4X C1D2/C2D1 Industrial Emergency Light The Dynamo Series offers
High-Performance Industrial Emergency LED Lighting LHP & LHPR SERIES
High-Performance Industrial Emergency LED Lighting LHP & LHPR SERIES The LHP Series offers many advantages in an industrial environment LHP SERIES Illuminates wide, open areas such as warehouses, manufacturing
25 Sign / Wall Lighter 4324 LED Series Extruded Aluminum, PicoPrism LED revision 9/9/15 kl_4324led_series_spec.pdf
Type: Catalog number: / / Wattage / Lamp(s) Finish Options: See page 2 ing Options: See pages 3-5: Approvals: Date: Page: 1 of 5 Specifications ORDERING INFORMATION Light Engine Length l 4324P70 / 16L3KUV
TL210/TL310/ TL410 -WCS SERIES
TL210/TL310/ TL410 -WCS SERIES Wet Location While In Use 10-(260mm) Anaheim Convention Center, CA 10" 5" (127mm) (279mm) 2" (51mm) 11-1/2" (292mm) 3-1/2"dia(Hole) (89mm) 4"(102mm) 9-1/2" OC (241mm) The
stainless steel Cover hinge The cover hinge is simply screwed to the box protection channel and to the edge fold. Model No. KL
aus HB, S. 46 The Rittal range of terminal boxes offers 44 practical designs, developed and improved in constant dialogue with users. Whether with or without gland plates, in stainless steel, EMC version
Catalog # Project. Comments. Prepared by. 11" [279mm] 8-3/4" [222mm] ESCUTCHEON PLATES. 2-5/8" [67mm] 3/4" [19mm] Dia. Hole. 3" [77mm] 1-1/2" [39mm]
![Catalog # Project. Comments. Prepared by. 11 [279mm] 8-3/4 [222mm] ESCUTCHEON PLATES. 2-5/8 [67mm] 3/4 [19mm] Dia. Hole. 3 [77mm] 1-1/2 [39mm]](/thumbs/71/66075256.jpg "Catalog # Project. Comments. Prepared by. 11 [279mm] 8-3/4 [222mm] ESCUTCHEON PLATES. 2-5/8 [67mm] 3/4 [19mm] Dia. Hole. 3 [77mm] 1-1/2 [39mm]")
DESPTION SPECIFICATION FEATURES at The patented Lumark Crosstour MAXX LED Wall Pack Series of luminaries provides low-profile architectural style with super bright, energy-efficient LEDs. The rugged die-cast
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications
W Series Cast Junction Box Options Boxes Available for Raintight, Watertight, or Submersible Applications This table shows the optional items available on the different types of enclosures shown in this
Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
Arktite Circuit Breaking CPS Receptacles and CPP Plugs Delayed Action Factory Sealed
Arktite Circuit Breaking CPS Application: CPS receptacles, angle and straight types, and CPP plugs are used: with portable electrically operated devices such as motor-generator sets, compressors, conveyors,