Quick-Fit Ducting 2018 Price Catalog

Transcription

1 QF Quick-Fit Ductg 2018 Catalog Pricg effective February 1, 2018 Made the US DuctgSystems.com

2 Nordfab Ductg The World s Fastest Ductg Nordfab s Quick-Fit (QF ) is The World s Fastest Ductg every aspect of your dust collection stallation. From the time you first need design or quotation assistance, through delivery and stallation, to after sales service and replacement parts, Nordfab lives up to beg The World s Fastest Ductg. Enhanced Production Capabilities QF clamps together seconds without welds, bolts, screws, flanges, special tools, precise measurements or specialized skills. It cuts stallation time and duct-related downtime by more than 45% over traditional ductwork. Our nationwide distribution network understands the urgency of your requests and has the tools and trag to design and quote a system very quickly. Nordfab ships most QF orders four days or less. nd if you have an emergency, we can often get stock or galvanized standard parts out on the day you call. Once your QF ductg is stalled, you can quickly and easily take it apart for cleang or to reconfigure for any floor plan changes. Quick-Fit is ideal for most dust, mist and fume collection applications. This catalog contas pricg for Nordfab Quick-Fit ductg galvanized and 304 staless steel diameters from 3" to 24". We can also provide black metal, alumum, and 316SS, as well as galvaneal. If you are need of custom fittgs for specialized applications, ask your salesperson for availability. Visit DuctgSystems.com for Technical Data sheets and additional product formation. In the US, Nordfab currently owns and operates two office and manufacturg facilities Thomasville, North Carola, an 80,000 ft 2 facility for manufacturg QF products and a 30,000 ft 2 facility for manufacturg heavier gauge products. More than 150 production, sales, and customer support employees work at our facility. No direct competitor the dustry matches Nordfab s vestment qualified employees, R&D or production technology. Nordfab is ISO 9001:2015 and ISO 14001:2015 registered, ensurg our dependability, quality, service, delivery, and mimum impact on the environment. Nordfab is a global manufacturer with sales and production facilities Europe (Scandavia and the United Kgdom) and sia as well as the US. 2 The world s fastest ductg

3 Table of Contents Description Part Center Le Radius Page bout Leak-Free System 41 djustable Nipple W/ O-Rg djustable Nipple 18ga 3202-XX18 10 dj. Nipple ssembly 16ga 3201-XXHG 10 ngle Flange ngle Flange dapter ngle Flange Gasket all Jot arrel Hood ell Mouth Hood last Gate utomatic NFES last Gate utomatic SD last Gate Manual last Gate NFMES leed-in Valve ranch ridge Clamp (Hose) utterfly Valve Canopy Hood Clamp Hanger Clamp w/ P - Nitrile Seal Clamp w/ P - Silicone Seal Clamp w/ P - eptfe Seal Custom Manifold - 30 Damper, ack Draft Diverter Valve utomatic Diverter Valve Manual Diverter Valve SD utomatic Diverter Valve SD Manual Double ranch Drawg Service DS/MC 43 Elbow Long Radius Long Radius Long Radius Long Radius 14 Elbow Flanged Elbow 16ga 3212 LS 1.5 CLR 18 Elbow Tubed & 2.5 CLR 17 End Cap End Cap with ird Screen Flanged Pipe Flashg - Wall Flashg - Roof Flashg - Roof Skirt Floor Sweep Gripple Hanger Catalog and prices are subject to change without notice General Conditions of Sale apply Product photographs reference only Published lengths are nomal and may vary slightly ll photos property of Nordfab Ductg Description Part Page Hose dapter Hose Clamp In-Cut In-le Spark Trap Jet Cap Leak-free Gasket Leak-free O-Rg Mache dapters No-Loss Stackhead Oil Mist Recycler O-Rg Pipe Hanger Pipe Hanger HJ 3265HJ 33 QF Pipe QF Pipe18ga 3200-XX18 10 QF Pipe 16ga 3200-XX16 10 Radial rm Saw Hood Reducer Reed Switch ssembly RSW Reed Switch ssembly RSW Rigid Flex Steel Hose Router Hood Router Hood w/ Magnet Rubber Hose Silencer Slidg ccess Panel Static Dissipative Urethane Hose Strut Hanger Suction Hood Suction Nozzle ssembly Tap-In T-ranch Transition Rectangular to Round Ultra Flex Steel Hose Vibration Isolator Viewg Spool Y-ranch dj. Nipple Install Instructions 43 ir Volume Chart 48 ranch Styles 43 Conditions of Sale 50 Drawg Service 43 Flex Hose Styles 28 Installation Tips 46 Leak-Free System 41 Manifold Specification 42 Parts List 4-5 Reducer Styles 44 Return Goods Chart 51 Shippg Details 49 Sizg a Pipe System 48 Take-Off Sheet 47 Transition Styles 45 Long Lead Items PRODUCT CODE DIMETER INCHES MTERIL SPECIL USE DEGREE CL RDIUS MTERIL VILLE: 1- GLVNIZED STEEL, STINLESS STEEL DuctgSystems.com 3

4 Nordfab Ductg Parts List Pipe & Clamps QF Pipe djustable Nipple O-Rg Clamps Flanged Pipe 16ga & 18ga Pipe 16ga Nipple ssembly &18ga Nipple PRT: 3200 Page 6 PRT: 3202 Page 6 PRT: 3262 Page 6 PRT: 3260 Page 7 PRT: 3201 Page 8 PRT NO XX16 PRT NO XX18 Page 10 PRT NO XXHG PRT NO XX18 Page 10 Pipe & Clamps ngle Flange dapter ngle Flange & Flange Gasket Elbows Elbows Long Radius Elbows Flanged Elbows Tubed Elbows 16ga Elbows PRT: 3250 Page 8 PRTS: 3261 & 3263 Page 9 PRT: 3210 Page PRT: 3210 LR Page PRT: 3211 Page PRT: 3214 Page 17 PRT: 3212 Page 18 ranches ranch Y-ranch Double ranch T-ranch In-Cut Tap-In PRT: 3220 Page 19 PRT: 3221 Page 19 PRT: 3226 Page 20 PRT: 3227 Page 20 PRT: 3223 Page 21 PRT: 3224 Page 21 dapters Hose dapter PRT: 3282 Page 22 Mache dapter Expanded PRT: 3249 Page 22 Raw Reducer PRT: 3222 Page 23 Transition Rectangular to Round PRT: 3225 Page 23 End Cap and End Cap w/ bird screen PRT: 3151 PRT: 3152 Page 24 QF Ductg cuts stallation and downtime by more than 45% last Gates last Gate Manual last Gate NFMES Manual SD uto last Gate last Gate NFES utomatic PRT: 3240 PRT: 3241 PRT: 3242 Page 25 Page 25 Page 26 Hoses & Clamps lack Rubber Hose Clear Rubber Hose Hose Clamp PRT: 3245 Page 26 ridge Hose Clamp Static Dissipative Urethane Hose Rigid Flex Steel Hose Ultra Flex Steel Hose PRT: 3280-XXXX Page 27 PRT: 3280-XXXX Page 27 PRT: 3285 Page 27 PRT: 3288 Page 27 PRT: 3279 Page 27 PRT: 3281 Page 28 PRT: 3283 Page 28

5 Hoods Canopy Hood arrel Hood Router Hood ell Mouth Hood Radial rmsaw Hood Suction Hood Custom Manifold PRT: 3231 with Magnet PRT: 3270 Page 29 PRT: 3271 Page 29 PRT: 3232 Page 29 PRT: 3251 Page 30 PRT: 3229 Page 30 PRT: 3230 Page 30 Page 30 Diverter Valves Manual Diverter Valve utomatic Diverter Valve SD Diverter Valves Made the US PRT NO (Manual) PRT: 3235 Page 31 PRT: 3236 Page 31 PRT NO (uto) Page 32 Hangers & Installation Gripple Hanger Pipe Hanger & Pipe Hanger HJ Clamp Hanger Strut Hanger Wall Flashg Roof Flashg Roof Skirt PRT: 3265 PRT: 3266 PRT: 3265HJ PRT NO. 3265QF PRT NO PRT NO PRT NO Page 33 Page 33 Page 34 Page 34 Page 35 Page 35 PRT NO Page 35 ccessories No-Loss Stackhead Jet Cap Silencer In Le ack Draft Damper Vibration Isolator utterfly Valve leed Valve PRT: 3204 Page 36 PRT NO Page 36 PRT: 3106 Page 37 PRT: 3219 Page 37 PRT: 3206 Page 38 PRT: 3208 Page 39 PRT: 3207 Page 39 ccessories all Jot Floor Sweep Suction Nozzle ssembly Viewg Spool Slidg ccess Panel PRT: 3209 PRT: 3248 PRT: PRT: 3205 PRT: 3103 Page 39 Page 40 Page 37 Page 40 Page 38 Special pplications In-le Spark Trap Leak-Free Epoxy Caulkg Leak-Free Gasket Leak-Free O-rg Oil Mist Recycler PRT: 3255 Page 40 Page 41 PRT: 3190 Page 41 PRT: 3191 Page 41 PRT: 3192 Page DuctgSystems.com

6 PIPE & CLMPS QF Duct Pipe Length Ends SS SS $29.20 $ $29.20 $ $32.00 $ $38.50 $ $47.20 $ $53.00 $ $57.30 $ $61.70 $ $73.90 $ $73.90 $ $95.20 $ QF $95.20 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ QF djustable Nipple with O-Rg Ends Length L. SS / $17.70 $ / $17.70 $ /4" $18.10 $ /4" $18.60 $ /8" $22.30 $ " $22.80 $ " $24.00 $ /8" $24.40 $ /8" $27.90 $ /8" $27.90 $ QF /8" $37.80 $ /8" $37.80 $ /8" $43.40 $ /8" $43.40 $ /8" $50.70 $ /8" $50.70 $ /8" $62.10 $ /8" $62.10 $ /8" $73.50 $ /8" $73.50 $ /8" $84.50 $ /8" $84.50 $ QF O-Rg PRT NO djustable Nipple Used to provide variable length adjustment of QF System. lack O-rg cluded standard. Specify Red O-rg (high temp ratg) if needed (additional cost). Laser welded. lack una-n Red Silicone Replacement O-rg for use with djustable Nipples XX XX Specify lack for standard. 3 4 $2.50 $2.50 $4.90 $ Specify Red for high temp material. Higher quantities may require 7-10 workg days lead time. 5 $2.50 $ $2.50 $ $3.80 $ $3.80 $ $3.80 $ $3.80 $ PRT NO $3.80 $ $3.80 $ $6.20 $ $6.20 $ $6.20 $ $6.20 $ $6.20 $ $6.20 $ $6.20 $ $6.20 $ $6.20 $ Denotes an item that is returnable. See page 51 for a full listg of returnable items. PRT NO QF rolled edge L L Laser welded seam and QF rolled ends. O-rg Pipe QF Clamp attached over rolled edge and O-rg. 6 The world s fastest ductg

7 Quick-Fit Clamp with P QF Clamps with Nitrile Seals 3260-XX00-X QF Clamps with Silicone Seals 3260-XX00-X QF Clamps with eptfe Seals 3260-XX00-X $9.20 $19.80 $11.50 $24.80 $19.30 $ $9.90 $19.80 $12.50 $24.80 $19.30 $ $10.60 $21.20 $13.20 $26.50 $20.60 $ $11.00 $22.60 $13.70 $28.20 $22.00 $ $11.50 $23.90 $14.40 $29.90 $26.30 $ $11.90 $25.30 $14.90 $31.80 $27.70 $ $12.30 $26.50 $15.40 $33.20 $29.20 $ $13.40 $27.90 $16.80 $34.90 $32.20 $ $14.50 $31.00 $18.10 $38.70 $37.20 $ $14.50 $31.00 $18.10 $38.70 $37.20 $ $15.80 $35.00 $19.80 $43.80 $40.00 $ $15.80 $35.00 $19.80 $43.80 $40.00 $ $17.40 $39.40 $21.80 $49.30 $42.70 $ $17.40 $39.40 $21.80 $49.30 $42.70 $ $18.10 $40.70 $22.70 $50.90 $45.20 $ $18.10 $40.70 $22.70 $50.90 $45.20 $ $18.90 $42.10 $23.60 $52.80 $48.40 $ $18.90 $42.10 $23.60 $52.80 $48.40 $ $19.80 $43.50 $24.80 $54.40 $50.70 $ $19.80 $43.50 $24.80 $54.40 $50.70 $ $22.80 $50.00 $28.60 $62.50 $58.30 $ $22.80 $50.00 $28.60 $62.50 $58.30 $ dditional ridge Ps SS LRGE PINS SMLL PINS $0.50 $1.40 $0.50 $1.40 $0.50 $1.40 (10) SS $0.20 $0.50 $0.20 $0.50 $0.20 $0.50 (10).11 Nitrile & SP3000 $0.20 per foot SP4000 $0.30 per foot SP5000 $0.40 per foot dditional Seals Silicone & HT3000 $.90 per foot HT4000 $1.00 per foot HT5000 $1.10 per foot eptfe & SG3000 $1.50 per foot SG4000 $2.20 per foot SG.650 $2.60 per foot PRT NO QF Clamps come standard from factory with Nitrile seals. Silicone or eptfe seals are optional - specify when orderg. Clamps also may be ordered optionally without seals. anized clamp supplied with galvanized bridge p. SS clamp supplied with SS bridge p. 3" to 6" QF Clamps: Small bridge p with 3/8" wide seal from factory. 7" to 11" QF Clamps: Large bridge p with 1/2" wide seal from factory. 12" to 24" QF Clamps: Large bridge p with 5/8" wide seal from factory. Nitrile and Silicone seals stocked rolls of 50'. eptfe seals stocked rolls of 100'. PIPE & CLMPS What is the best seal for my application? Nitrile seals are serted to QF Clamps as standard. Rated for max. termittent service temperatures of 194 and contuous 158 F, there is no additional charge for nitrile so it is the most economical choice. Silicone seals are an economically priced option for operatg temperatures above 158 F. Rated for max. service temperature of 400 F, silicone has an extremely broad temperature range capability as it is also very good low temperatures, remag flexible at -60 F. dditionally, silicone offers superb resistance to weather agg and ozone. eptfe seals are not degraded by any common chemicals (0-14 ph range) FOR INDUSTRIL USE ONLY. Not for use food, drug, cosmetic or medical device manufacturg, processg, or packagg operations. Max. temperature ratg of 600 F. Use Quick Tick Onle Nordfab s dealer tool for quick quotg & orderg the correct quantity of clamps automatically will be added to your order -Denotes an item that is returnable. See page 51 for a full listg of returnable items DuctgSystems.com 7

8 PIPE & CLMPS Flanged Duct Pipe, 3" - 24" Length Ends SS SS LW $45.90 $ LW $61.90 $ LW $62.30 $ LW $68.40 $ LW $77.20 $ LW $85.80 $ LW $89.20 $ LW $ $ LW $ $ FLNGE LW $ $ LW $ $ LW $ $ LW $ $ LW $ $ LW $ $ LW $ $ LW $ $ LW $ $ LW $ $ Flanged Duct Pipe, 26" - 40" Length Ends SS SS $ $ $ $ $ $1, $ $1, FLNGE $ $1, $ $1, $ $1, $ $1, PRT NO Van Stone Connection Now with solid welded seams L Use this duct for sizes over 24" diameter and / or when flanged connections are required. Longitudal seam is solid welded (laser weld sizes 3" to 24" diameter, plasma weld on sizes 26" to 40"). ngle flange attached by vanstone lip. Length is Nordfab pipe standard: 59". Pipe larger than 24" diameter is constructed of highly durable 16 gauge material. QF ngle Flange dapter pprox. Length *Published lengths are nomal and may vary slightly $46.40 $ $46.40 $ $48.80 $ $58.30 $ $63.00 $ $65.60 $ $73.50 $ $77.40 $ $85.80 $ $85.80 $ $89.50 $ $89.50 $ $97.30 $ $97.30 $ $ $ $ $ $ $ $ $ $ $ PRT NO Length ngle Flange standard. Flat Flange: Specify hole pattern. (Cost same as ngle Flange). Specify angle (NGFL) or flat flange (FFL). If no hole pattern drawg provided, flat flange will be blank. -Denotes an item that is returnable. See page 51 for a full listg of returnable items. 8 The world s fastest ductg

9 ngle Flange ID OD H T /32 $9.80 $ /32 $9.80 $ /32 $10.80 $ /32 $13.50 $ /8 $14.40 $ /8 $17.80 $ /16 $19.80 $ /16 $23.60 $ /16 $30.90 $ /16 $30.90 $ /16 $38.30 $ /16 $38.30 $ /16 $52.30 $ /16 $52.30 $ /16 $55.20 $ /16 $55.20 $ /16 $58.00 $ /16 $58.00 $ /16 $64.60 $ /16 $64.60 $ /16 $69.30 $ /16 $69.30 $ /16 $96.50 $ /16 $96.50 $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ /16 $ $ NOTE: Other drill patterns available flat flanges. NSI Flange patterns are charged double the standard. Call for pricg on other options..c. No. of olts of olt Holes PRT NO lack nitrile standard. 60 durometer. Temp range -20 F to 170 F. Red silicone optional. 50 durometer. Temp range -65 F to 450 F. Nitrile material is conductive. One gasket per jot. NOTE: Gasket dimensions match ngle Flange dimensions shown above. PRT NO ngle Flange Gasket ID.C. OD OD = ID + 2(W) Nitrile 3263-XX anized or Staless Steel. (Specify if SS.) Silicone 3263-XX * $3.20 $ $4.30 $ * $5.40 $ $6.80 $ * $9.70 $ $10.60 $ * $11.60 $ $16.60 $ * $18.00 $ $19.20 $ * $22.70 $ * $23.90 $ * $33.50 $ * $35.20 $ * $37.10 $ * $40.00 $ * $41.70 $ * $43.40 $ ** $66.20 $ * $68.90 $ ** $71.50 $ * $76.50 $ ** $79.10 $ ** $84.30 $ ** $87.00 $ ** $93.20 $ ** $93.20 $ ** $94.70 $ ** $97.40 $ ** $ $ ** $ $ ** $ $ ** $ $ ** $ $ ** $ $ ** $ $ ** $ $ ** $ $ * Silicone Flange 5-7 days lead time ** oth Nitrile and Silicone are 5-7 days lead time PIPE & CLMPS DuctgSystems.com 9

10 PIPE & CLMPS 304SS Not vailable Laser welded seam and rolled ends. 304SS Not vailable Laser welded seam and rolled ends. PRT NO XX18 QF Pipe 18ga Length " $ " $ " $ " $ " $ " $ " $ " $ " $ " $ " $ " $ " $ " $ " $ " $ " $ " $ PRT NO XX16 QF Pipe 16ga Length " $ " $ " $ " $ " $ " $ " $ " $ " $ " $ SS Not vailable 304SS Not vailable PRT NO XX18 Used to provide variable length adjustment of QF System. lack O-rg cluded. Specify Red O-rg if needed (additional cost). Laser welded. PRT NO XXHG ssembly cludes cut pipe, clamp, and adjustable nipple with black O-rg. Specify Red O-rg if needed (additional cost). QF djustable Nipple 18ga Length /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ /8" $ QF Nipple ssembly 16ga Length HG $ HG $ HG $ HG $ HG $ " HG $ HG $ HG $ HG $ HG $ The world s fastest ductg

11 QF Elbows Style Tangents Ends CLR GLV SS SS GLV SS 90 Degree * P T $42.80 TUED * P T $52.80 TUED * P T $58.50 TUED * P T $65.90 TUED * P S $87.90 $ S S $ $ S S $ $ S S $ $ S S $ $ QF 1.5 S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $1, Degree * P T $42.80 TUED * P T $52.80 TUED * P T $54.80 TUED * P T $70.50 TUED * P S $87.90 $ S S $ $ S S $ $ S S $ $ S S $ $ QF 1.5 S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ Notes: * 1.0 and 1.5 SS T= Tubed style, see p. 17. P= Press formed halves stitch welded together. S= Segmented elbows. CLR= Center Le radius. PRT NO Note: Overall height calculation only works with 90 elbows. 1.5 CLR ø CLR 6.50 TNGENT ELOWS 3"QF 3"90 ELOW(1.0 CLR) Elbows galvanized sizes 3" - 7" are press-formed. Elbows sizes 8" - 24" are segmented. -Denotes an item that is returnable. See page 51 for a full listg of returnable items DuctgSystems.com 11

12 ELOWS QF Elbows Style Tangents Ends CLR SS SS SS 45 Degree * P T $38.60 TUED * P T $45.10 TUED * P T $49.90 TUED * P T $59.30 TUED * P S $83.50 $ S S $90.20 $ S S $91.90 $ S S $95.80 $ S S $ $ QF 1.5 S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ Degree * P T $38.60 TUED * P T $45.10 TUED * P T $49.90 TUED * P T $61.50 TUED * P S $83.50 $ S S $84.90 $ S S $87.90 $ S S $91.90 $ S S $93.90 $ QF 1.5 S S $93.90 $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ Notes: * 1.0 and 1.5 SS T= Tubed style, see p. 17. P= Press formed halves stitch welded together. S= Segmented elbows. CLR= Center Le radius. PRT NO Note: Overall height calculation only works with 90 elbows. 1.5 CLR tangent anized or staless steel (Specify if Staless Steel.) Elbows heavier gauges can be supplied solid welded construction at an additional cost. ø CLR TNGENT 3"QF Elbows galvanized sizes 3" - 7" are press-formed. Elbows sizes 8" - 24" are segmented. 3"45 ELOW(1.0 CLR) -Denotes an item that is returnable. See page 51 for a full listg of returnable items. 12 The world s fastest ductg

13 QF Elbow Long Radius Ends CLR Style Tangents SS SS SS 90 Degree * P T $42.80 TUED * P T $57.00 TUED * P T $63.90 TUED * P T $70.00 TUED * P S $93.90 $ S S $ $ S S $ $ S S $ $ S S $ $ QF 2.5 S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $1, S S $ $1, Degree * P T $42.80 TUED * P T $57.00 TUED * P T $63.90 TUED * P T $70.00 TUED * P S $92.30 $ S S $ $ S S $ $ S S $ $ S S $ $ QF 2.5 S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ CLR PRT NO anized or staless steel. (Specify if Staless Steel.) Elbows heavier gauges can be supplied solid welded construction at an additional cost. Specify LR when orderg Note: Overall height calculation only works with 90 elbows ø CLR TNGENT ELOWS Notes: * 1.5 and 2.5 SS T= Tubed style. CLR= Center Le radius. P= Press formed halves stitch welded together. S= Segmented elbows Tangent "QF 3"90 ELOW(1.5 CLR) -Denotes an item that is returnable. See page 51 for a full listg of returnable items DuctgSystems.com 13

14 ELOWS QF Elbow Long Radius Style Tangents. Ends CLR SS SS SS 45 Degree * P T $38.60 TUED * P T $57.00 TUED * P T $63.90 TUED * P T $70.00 TUED * P S $ $ S S $ $ S S $ $ S S $ $ S S $ $ QF 2.5 S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ Degree * P T $41.80 TUED * P T $57.00 TUED * P T $63.90 TUED * P T $70.00 TUED * P S $87.00 $ S S $ $ S S $ $ S S $ $ S S $ $ QF 2.5 S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ CLR PRT NO "QF "45 ELOW(1.5 CLR) anized or staless steel. (Specify if Staless Steel.) Elbows heavier gauges can be supplied solid welded construction at an additional cost. Specify LR when orderg. ø CLR TNGENT Notes: * 1.5 and 2.5 SS T= Tubed style. CLR= Center Le radius. P= Press formed halves stitch welded together. S= Segmented elbows. 14 The world s fastest ductg

15 QF Elbow Flanged CLR STYLE SS SS SS 90 Degree Tangents P T $63.90 TUED P T $75.90 TUED P T $84.20 TUED P T $ TUED P S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $1, S S $ $1, S S $ $1, S S $ $1, S S $ $1, S S $1, $1, S S $1, $2, S S $1, $2, S S $1, $3, S S $2, $4, Degree P T $63.90 TUED P T $75.90 TUED P T $80.20 TUED P T $ TUED P S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $1, S S $ $1, S S $ $1, S S $ $1, S S $ $1, S S $1, $1, S S $1, $2, S S $1, $2, S S $1, $3, CLR PRT NO ø CLR Flange attached by vanstone lip. Flanges on both ends. lso available Long Radius. TNGENT ELOWS T= Tubed style. CLR= Center Le radius. P= Press formed halves stitch welded together. S= Segmented elbows. Notes: * 1.0 and 1.5 SS DuctgSystems.com 15

16 ELOWS QF Elbow Flanged CLR Style SS SS SS 45 Degree Tangents P T $43.70 TUED P T $68.00 TUED P T $75.00 TUED P T $90.20 TUED P S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $1, S S $ $1, S S $ $1, S S $ $1, S S $ $1, S S $ $1, S S $1, $1, S S $1, $2, Degree P T $68.00 TUED P T $68.00 TUED P T $75.00 TUED P T $92.60 TUED P S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $ S S $ $1, S S $ $1, S S $ $1, S S $ $1, S S $ $1, S S $ $1, S S $ $1, C.L.R. PRT NO ø C.L.R. TNGENT Flange attached by Van Stone lip. Flanges on both ends. lso available Long Radius. T= Tubed style. CLR= Center Le radius. P= Press formed halves stitch welded together. S= Segmented elbows. Notes: * 1.0 and 1.5 SS 16 The world s fastest ductg

17 QF Elbow Tubed Ends CLR SS Tangents 90 Degree $64.30 $ $64.30 $ QF $ $ $ $ $ $ Degree $64.30 $ $64.30 $ QF $ $ $ $ $ $ Degree $64.30 $ $64.30 $ QF $ $ $ $ $ $ Degree $64.30 $ $64.30 $ QF $ $ $ $ $ $ CLR PRT NO ø CLR TNGENT anized or staless steel. (Specify if Staless Steel.) Tubed elbows are air flow directional (collar on outside of tube for outlet and collar on side of tube for let). Please specify direction if orderg ends other than QF. ELOWS QF Elbow Tubed Long Radius Tangents Ends CLR SS 90 Degree LR $70.00 $ LR $70.00 $ LR QF $ $ LR $ $ LR $ $ Degree LR $70.00 $ LR $70.00 $ LR QF $ $ LR $ $ LR $ $ Degree LR $70.00 $ LR $70.00 $ LR QF $ $ LR $ $ LR $ $ Degree LR $70.00 $ LR $70.00 $ LR QF $ $ LR $ $ LR $ $ CLR PRT NO ø CLR anized or staless steel. (Specify if Staless Steel.) Tubed elbows are air flow directional (collar on outside of tube for outlet and collar on side of tube for let). Please specify direction if orderg ends other than QF. TNGENT This tube is airflow directional (collar on outside of tube for outlet and collar on side of tube for let). Please specify direction if orderg ends other than QF. Items may take longer than standard lead times DuctgSystems.com 17

18 ELOWS QF Elbow 16ga Ends CLR Tangents. SS 90 Degree $ $ $ $ $ $ $ $ $ $ $ $ $ $ QF $ $ $ $ $ $ $ $ $ $ $ $1, $ $1, $ $1, Degree $ $ $ $ $ $ $ $ $ $ $ $ $ $ QF $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $1, Degree $ $ $ $ $ $ $ $ $ $ $ $ $ $ QF $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Degree $ $ $ $ $ $ $ $ $ $ $ $ $ $ QF $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ PRT NO CLR CLR 90 QF CLR 60 QF CLR 45 QF CLR 30 QF CLR 16ga Elbows are constructed of gores lapped over one another and spot welded. This is a directional elbow and supplied with an arrow to dicate the direction of flow. Please specify direction if orderg ends other than QF. Other CLRs available upon request. Interior buffg available upon request for additional 10% cost. ø TNGENT Specify anized or SS304: - anized is 16 gauge with 16 gauge collars. - SS is 16ga with 20ga collars. CLR: Standard is CLR 16ga Elbows available at no extra cost 18 The world s fastest ductg

19 QF ranch Ends SS () XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $1, $1, XX FLNGE $1, $1, NOTE: See page 51 for returnable sizes QF LL legs L =x2+9" Combo QF & FL any leg L =x2+15" C PRT NO L x.5 C 30 Deg ll branches priced by large end. Standard 30º Optional 45º. When orderg specify,, C. - -C Use formula above to determe if a reducer is needed at C. On sizes above 24", is flanged. dd the cost of flange if and / or C require flanges. QF=5.5 FL= 8.5 RNCHES QF Y-ranch (Traditional Pant Leg Design) Ends SS XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $1, $1, XX FLNGE $1, $1, H=+4" D PRT NO D 60 On sizes above 24", is flanged. dd the cost of flange if and / or D require flanges. 3.5" STD ll branches priced by large end. Standard 60º Optional 90º. When orderg specify,, D. oth & D each must be at least 50% of. With or D beg at least 80% of the opposite leg. Flange Leg: Length = 4.5 Height = DuctgSystems.com 19

20 RNCHES QF Double ranch Ends SS. () XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $1, $1, XX FLNGE $1, $1, QF all legs: L = x 2 + 9" QF & FL: L = x D C PRT NO D L x.5 C ll branches priced by large end. When orderg, specify,,c,d. ( - ) (-C) and () (D) Reducer at or D may be required. Use formula above to determe. Standard 30º Optional 45º On sizes above 24", is flanged. dd the cost of flange if, C, and / or D require flanges. QF = 5.5" FL = 8.5" QF T-ranch Ends SS. () XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $1, $1, XX FLNGE $1, $1, PRT NO On sizes above 24", 1 and 2 are flanged. dd the cost of flange if requires a flange. 4 ll branches priced by large end. When orderg, specify,. 1 to 2 must be the same dimension; however, must be equal to or smaller than the dimension. 20 The world s fastest ductg

21 QF In-Cut Ends SS. () XX03 QF $53.40 $ XX04 QF $53.40 $ XX05 QF $54.70 $ XX06 QF $58.70 $ XX07 QF $62.10 $ XX08 QF $65.10 $ XX09 QF $67.90 $ XX10 QF $73.50 $ XX11 QF $79.10 $ XX12 QF $79.10 $ XX13 QF $89.50 $ XX14 QF $89.50 $ XX15 QF $ $ XX16 QF $ $ XX17 QF $ $ XX18 QF $ $ XX20 QF $ $ XX22 QF $ $ XX24 QF $ $ XX26 FLNGE $ $ XX28 FLNGE $ $1, XX30 FLNGE $ $1, XX32 FLNGE $ $1, XX34 FLNGE $ $1, XX36 FLNGE $ $1, XX38 FLNGE $ $1, XX40 FLNGE $ $1, PRT NO Saddle length and width = 3" all directions from ranch Tube (). d by diameter. Specify and diameter and end treatment. Standard end is QF. Standard 30º Optional 45º. In-cut used to cut to existg les to beg QF system. 30 = Pipe Diameter RNCHES *XX = dimension, Number = dimension. based on QF Tap In Ends SS. () XX03 QF $53.40 $ XX04 QF $53.40 $ XX05 QF $54.70 $ XX06 QF $58.70 $ XX07 QF $62.10 $ XX08 QF $65.10 $ XX09 QF $67.90 $ XX10 QF $73.50 $ XX11 QF $79.10 $ XX12 QF $79.10 $ XX13 QF $89.50 $ XX14 QF $89.50 $ XX15 QF $ $ XX16 QF $ $ XX17 QF $ $ XX18 QF $ $ XX20 QF $ $ XX22 QF $ $ XX24 QF $ $ XX26 FLNGE $ $ XX28 FLNGE $ $1, XX30 FLNGE $ $1, XX32 FLNGE $ $1, XX34 FLNGE $ $1, XX36 FLNGE $ $1, XX38 FLNGE $ $1, XX40 FLNGE $ $1, PRT NO " Saddle length and width = 2" all directions from ranch Tube (). d by diameter. Specify and diameter and end treatment. Standard end is QF. Tap In is used to cut to existg les to beg QF system. = Pipe Diameter *XX = dimension, Number = dimension. based on DuctgSystems.com 21

22 DPTERS QF Hose dapter pprox. Length $22.20 $ $22.20 $ $24.80 $ $29.10 $ $31.40 $ $33.60 $ $35.60 $ $37.80 $ $40.50 $ $40.50 $ $42.70 $ $42.70 $ $44.70 $ $44.70 $ $49.30 $ $49.30 $ $50.90 $ $56.00 $ $64.30 $ *Published lengths are nomal and may vary slightly PRT NO Length ø Used to connect to rubber hose. Will not work with metal flex hose. QF Mache dapter Raw End ID Raw End OD *Published lengths are nomal and may vary slightly. pprox. Length Maximum Open Dim. ID $21.90 $ $21.90 $ $24.30 $ $28.60 $ $30.60 $ $33.00 $ $34.90 $ $37.20 $ $39.60 $ $39.60 $ $41.90 $ $41.90 $ $43.90 $ $43.90 $ $48.40 $ $48.40 $ $50.00 $ $54.90 $ $63.30 $ Expanded Standard PRT NO " Deep** I.D. Length Expanded Standard end styles are QF to NOFIT. If Expanded, specify desired ID or OD of non QF end. Specify if different end style required. Options are: flanged (NGFL or FFL) and raw (RWID or RWOD). Must be with maximum opened dimension (.3"), or will be priced as reducer. Length Standard I.D. or O.D. dapters can only be expanded up to.3" above the nomal diameter size ( dimension). Expansions larger than.3" should be ordered as a reducer. -Denotes an item that is returnable. See page 51 for a full listg of returnable items. 22 The world s fastest ductg

23 QF Reducer PRT NO. Ends SS NOTE: See page 51 for returnable sizes XX QF $49.90 $ XX QF $49.90 $ XX QF $50.80 $ XX QF $53.50 $ XX QF $53.80 $ XX QF $54.80 $ XX QF $62.10 $ XX QF $63.10 $ XX QF $74.40 $ XX QF $74.40 $ XX QF $88.70 $ XX QF $88.70 $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX FLNGE $ $ XX FLNGE $ $ XX FLNGE $ $ XX FLNGE $ $ XX FLNGE $ $ XX FLNGE $ $ XX FLNGE $ $ XX FLNGE $ $ PRT NO NOTE: See page 44 for orderg structions On sizes above 24, is flanged. dd the cost of ngle Flange if requires a flange. d by large end. When orderg specify,. Specify reducer end style. X & Y are standard 2 long nomal. QF length (L)= -+6, 7 m. FL length (L)= -+8, 9 m. end can be as small as 1". DPTERS QF Transition Rectangular to Round* SQ to SQ Size Ends XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX QF $ $ XX FLNGE $ $ XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $1, XX FLNGE $ $2, XX FLNGE $1, $2, XX FLNGE $1, $3, XX FLNGE $1, $4, PRT NO See page 45 for additional transition orderg structions and notes (s shown) ø d by largest area of openg - either round end (D) or the rea of Diameter closest to the squared area of the rectangular end ( x =SQ). Pricg for Style 1 only. * Pricg based on a sheet metal flange (SMFL), raw, or hemmed end; ngle Flange or Flat Flange cost not cluded price. See ngle Flange pricg on pg. 9 (use Round equivalent). X=2, Y=2 (dd cost of flange) *NOTE: Mimum L = x.75. If less, square to square transition will be provided. 7" mimum L allowable for Sq to Rd and 4" L mimum allowable for Sq to Sq. ø DuctgSystems.com 23

24 DPTERS QF End Cap PRT NO. Ends. SS $15.20 $ $15.20 $ $16.40 $ $18.50 $ $20.80 $ $22.00 $ $24.10 $ $25.20 $ $26.50 $ QF $26.50 $ $28.30 $ $28.30 $ $29.80 $ $29.80 $ $31.60 $ $31.60 $ $33.60 $ $34.70 $ $40.10 $ " Nomal End Caps enable users to close off taps for future use. End Caps larger than 24" will be a flat plate and angle rg. Call for pricg. QF End Cap with irdscreen Ends. SS $38.40 $ $38.40 $ $40.10 $ $41.60 $ $44.40 $ $45.50 $ $47.60 $ $48.60 $ $50.10 $ QF $50.10 $ $51.70 $ $51.70 $ $53.00 $ $53.00 $ $55.20 $ $55.20 $ $57.00 $ $58.20 $ $66.70 $ " Nomal 3152 End cap with birdscreen 1/2" wire mesh. End Caps larger than 24" will have expanded metal. Call for pricg. 24 The world s fastest ductg

25 QF last Gate Manual SS SS SS Ends Width Height Depth Width Height Depth QF $48.80 $ QF $48.80 $ QF $50.80 $ QF $66.70 $ QF $82.70 $ QF $97.90 $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF CLL CLL CLL $ $1, QF CLL CLL CLL $ $1, QF CLL CLL CLL $ $1, QF CLL CLL CLL $ $1, QF CLL CLL CLL $ $1, FLNGE CLL CLL CLL CLL $1, CLL FLNGE CLL CLL CLL CLL $1, CLL FLNGE CLL CLL CLL CLL $2, CLL PRT NO Manually operated, cast alumum body with galvanized blade and standard QF connection, unless otherwise specified. SS model is 100% SS. SS last Gates have a production time of 7 days mimum. QF last Gate NFMES Ends Width Height Depth $ $ N/ $ $ $ $ $ $ $ $ QF $ $ $ $ $ $ $ $ $ $ $ $ PRT NO Manually operated, energy savg blast gates. These compact and easy to operate gates are constructed of galvanized metal or 304SS with a special sealg device that reduces air loss and friction operation. Other sizes available upon request. LST GTES SS last Gates have a production time of 7 days mimum. SS last Gates have a production time of 7 busess days mimum -Denotes an item that is returnable. See page 51 for a full listg of returnable items DuctgSystems.com 25

26 QF last Gate NFES utomatic Ends C D $ $1, $ $1, $ $1, $ $1, $ $1, $ $2, $1, $2, QF $1, $2, $1, $2, $1, $3, $1, $3, $1, $3, $1, $3, $1, $4, SS last Gates have a production time of 7 busess days mimum. ll cylders are magnetic. D PRT NO C utomatic energy savg blast gates operated by compressed air cylders. Cylders are controlled by electrically-connected solenoid to maches or remote switch. Gates are constructed of galvanized metal or SS (optional) and a special sealg device that reduces air loss and friction operation. vailable sizes 4 dia dia., 120V control circuit and 75psi mimum air pressure. Optional 24V DC or C control circuit available. PPLICTION: Gates are used as energy savg devices for dustrial dust extraction where contuous extraction is not always needed and where manual control needs to be elimated. Sgle cylder: 3" to 8". Double cylder 9" to 22". ll auto blast gates have cylders with galvanized or SS body and steel rod. Solenoid has plastic housg. D C D Sgle Cylder Double Cylder LST GTES Reed Switch ssembly 1.06 Per ssembly RSW106 $93.50 Optional position (open/closed) sensg switch with dicator light. ssembly cludes two switches, one dicatg open position and one dicatg closed position. Cylder with reed switches attached shown above pplies to both styles of automatic last Gate. QF SD utomatic last Gate Ends C D Items may take longer than standard lead times. E $ $ $ $ $ $ $ QF $ N/ $ N/ $ N/ $ N/ $1, N/ $1, N/ $1, N/ $1, E PRT NO D SINGLE CYLINDER Sgle Cylder Operated by compressed air cylders, controlled by electrically connected solenoid. 120V Control Circuit and 75psi mimum air pressure. Optional 24V DC or C control circuits available. Sgle cylder: 3" to 10". Double cylder 12" to 24". Not available SS. C D TWO CYLINDER Double Cylder C -Denotes an item that is returnable. See page 51 for a full listg of returnable items. 26 The world s fastest ductg

27 Rubber Hose, lack PER FOOT 1" $ " $4.60 2" $ " $ mm $ " $7.80 4" $7.80 5" $9.90 6" $ " $ " $ " $ " $ " $ " $ " $ " $ " $ " $71.90 Rubber Hose, Clear per Foot 2" $ " $ mm $8.70 4" $ " $ " $ " $ " $ " $ " $ " $ " $ " $ " $50.00 Static Dissipative Urethane Hose, Clear per Foot 80mm $ " $ " $ " $ " $ " $ " $52.80 PRT NO lack thermoplastic flexible rubber hose reforced with sprg steel wire helix. Order hose clamps separately. 1" - 12" is sold 5' crements up to 50' maximum. 14" - 24" sold 5' crements up to 25' maximum. Use 3282 Hose dapter with this hose. PRT NO Clear polyurethane flexible rubber hose reforced with a bronze coated sprg steel wire helix, manufactured with FD acceptable materials. Order hose clamps separately. 2" - 12" is sold 5' crements up to 50' maximum. 14" - 16" sold 5' crements up to 25' maximum. Use 3282 Hose dapter with this hose. PRT NO Medium weight clear static dissipative polyurethane hose reforced with bronze coated sprg steel wire helix, manufactured with FD acceptable materials. PRT NO Hose Clamp Staless Steel Only $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ PRT NO ridge Clamp for Hose $ $ $ $ $ $ $ $ $ $ Conforms to hose s wire helix for more secure fit. HOSES & CLMPS Great abrasion resistance & high tear strength as well as superior chemical resistance, excellent flexibility, and tolerance for applications with wide temperature ranges. Order hose clamps separately. -Denotes an item that is returnable. See page 51 for a full listg of returnable items DuctgSystems.com 27

28 Rigid Flex Steel Hose per Foot per Foot $5.50 N/ $7.00 $ $7.30 N/ $10.70 $ $13.40 $ $16.40 $ $20.20 $ $23.00 $ $26.30 $ $29.40 $ $31.70 $ $38.40 $ $44.40 $ PRT NO Flexible rigid steel hose for higher temperature or abrasive material. vailable anized or Staless Steel. 1.5" - 6" is sold 5' crements up to a 25' maximum length. 7" - 14" hoses are sold 5' crements only. If lengths longer than 5' are needed, Nordfab can supply 5' hose assemblies with Quick-Fit ends to easily connect additional assemblies. Comes with raw ends standard. QF or ngle Flange ends can be attached (additional charge). Items may take longer than standard lead times. * Do NOT use 3285 SS Hose Clamps with these hoses (3281 & 3283). lternate ends are available for these hoses upon request at additional cost of $10.00 per end plus the cost of a mache adapter. If flange required, see pg. 9. Ultra Flex Steel Hose per Foot per Foot $20.00 $ $20.00 $ $24.90 $ $30.40 $ $35.90 $ $40.60 $ Items may take longer than standard lead times. PRT NO Special flex steel hose. vailable anized or Staless Steel. 3" - 6" is sold 5' crements up to a 25' maximum length. 7" - 8" hoses are sold 5' crements only. If lengths longer than 5' are needed, Nordfab can supply 5' hose assemblies with Quick-Fit ends to easily connect additional assemblies. Comes with pla ends standard. QF or ngle Flange ends can be attached (additional charge). HOSES & CLMPS Flex Hose Styles Flat Flange (FFL) Length=End of Fittg to End of Fittg NOTE: When orderg Flex Pipe with a pla edge (PLEDGE), order 5'-0" crements. (5'0", 10'0", 15'0", etc.) For pla edge on hose, designate PLEDGE For raw end, designate RawID (RID) RawOD (ROD) Quick Fit (QF) end ngle Flange (NGFL) Inlet End NOTE: one end is designed to fit side of the flex tube. irflow Flex Hose Select Rigid Ultra Flex (UF) Outlet End NOTE: one end is expanded to fit over the outside of the flex tube. Quick Fit (QF) end For raw end, designate RawID (RID) RawOD (ROD) For pla edge on hose, designate PLEDGE Flat Flange (FFL) ngle Flange (NGFL) 28 The world s fastest ductg

29 QF Canopy Hood L X Y Ends $ $ $ $ QF $ $1, $1, $3, PRT NO Hood Design asis: 150 fpm capture velocity 2 ft. distance from source 20 gauge material Specify openg size: 18" square, 24" square, 36" square, or 48" square. Hemmed end standard. Other sizes upon request. Maximum size 72"x48". If flange needed, please see transition pricg. *NOTE: Mimum L =.75 (). If less, square to square transition will be provided. 7" mimum L allowable for Sq to Rd and 4" L mimum allowable for Sq to Sq. X=4, Y=2 QF arrel Hood Ends QF $ $1, $ $1, $ $1, ga material Designed to fit 55 gallon drums. PRT NO QF Router Hood Ends $ $ $ $ $ $ $ $ QF $ $ $ $ $ $ $ $ with Magnet PRT NO PRT NO Standard openg 6 x 12. Magnet itself is not available SS. HOODS QF Router Hood with Magnet Ends $ $ $ $ $ $ $ $ QF $ $ $ $ $ $ $ $ DuctgSystems.com 29

30 QF ell Mouth Hood () () Length (L) $80.70 $ $80.70 $ $93.70 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ CLL $ CLL $ CLL $ CLL $ CLL $ CLL $ CLL $ CLL $ CLL SS ell Mouth Hoods have a lead time of 4-5 busess days mimum. PRT NO flared end hood Increases capture ratio of air, dust, smoke etc. Increases lamar air flow 20 gauge QF Radial rm Saw Hood Ends SS $ Call QF $ Call $ Call 4.20 PRT NO Used to collect dust from Radial rm Saws ody 18 gauge, transition 22 gauge vailable SS R = HOODS QF Suction Hood 3230-XX02 Ends No. of Pickups 2 $ $ XX03 3 $ $ XX04 QF 4 $ $ PRT NO Specify round or rectangular XX05 5 $ $ XX06 6 $ $1, C D E 2" C Custom Manifold Custom manifolds are available. Contact our sales office for your particular needs. 30 The world s fastest ductg

31 QF Manual Diverter Valve Ends L Housg lack Metal () /16 $1, $1, /16 $1, $1, /16 $1, $2, /16 $1, $2, /16 $1, $2, /16 $1, $2, /16 $1, $2, /16 $1, $2, /16 $2, $2, QF /16 $2, $2, /16 $2, $3, /16 $2, $3, /16 $2, $3, /16 $2, $3, /16 $2, $3, /16 $2, $3, /16 $2, $3, /16 $2, $4, /16 $3, $4, Diverter Valves have a lead time of 7 days mimum Diverter Valves have a lead time of 7 days mimum irflow PRT NO High efficiency, economical method of divertg flow of material or air. Constructed of heavy 3/16 thick and pated metal with welded seams. Supplied with heavy duty flange beargs and rubber seal door. Manual Open and Close. 45º angle only. Other sizes available upon request. vailable black metal pated (standard) or staless steel (optional). Reverse flow available upon request. QF utomatic Diverter Valve Part No. Ends L Housg lack Metal () /16 $2, $3, /16 $2, $3, /16 $2, $3, /16 $2, $3, /16 $2, $3, /16 $2, $3, /16 $2, $4, /16 $3, $4, /16 $3, $4, QF /16 $3, $4, /16 $3, $4, /16 $3, $4, /16 $4, $5, /16 $4, $5, /16 $4, $6, /16 $4, $6, /16 $4, $6, /16 $5, $7, /16 $6, $9, Diverter Valves have a lead time of 7 days mimum Reed Switch ssembly 2.50 PER SSEMLY RSW250 $99.40 Optional position (open/closed) sensg switch with dicator light. ssembly cludes two switches, one dicatg open position and one dicatg closed position. pplies to both styles of automatic Diverter Valves. irflow PRT NO ll cylders are magnetic High efficiency, economical method of divertg flow of material or air. Constructed of heavy 3/16 thick and pated metal with welded seams. Supplied with heavy duty flange beargs and rubber seal door. Power Open and Close. Mimum 75psi. 45º angle only. Other sizes available upon request. vailable black metal pated (standard) or staless steel (optional). SS diverters have SS cylder with steel rod. Reverse flow available upon request. DIVERTER VLVES Cylder with reed switches attached shown at left DuctgSystems.com 31

32 High efficiency, economical method of divertg flow of material or air. Constructed of heavy 14ga thick galvanized or staless steel, with bolted seams. Supplied with heavy duty flange beargs and rubber seal door. 45 angle only. vailable galvanized (standard) or staless steel (optional). irflow PRT NO (Manual) PRT NO (uto) Operated by compressed air cylders, controlled by electrically connected solenoid. 120v control circuit and 75psi mimum air pressure. Optional 24v DC or C control circuits available. (uto Only) Diverters have galvanized or SS cylder with steel rod. QF SD Manual Diverter Valve SD uto Diverter Valve $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $1, $2, $1, $2, $1, $2, $2, $2, $2, $2, $2, $2, $2, $2, $2, $2, $2, $2, $2, $3, $2, $3, ll cylders are magnetic DIVERTER VLVES Diverter Valves have a lead time of 7 days mimum 32 The world s fastest ductg

33 QF Gripple Hanger Size Up to 22lbs LS $ Up to 100lbs LS $ Up to 200lbs LS $ Up to 495lbs LS $ Up to 715lbs LS $ PRT NO Comes length of 15 feet Most common hangg method QF Pipe Hanger $7.90 $ $7.90 $ $8.70 $ $10.00 $ $10.00 $ $12.00 $ $14.90 $ $15.60 $ $17.40 $ $17.40 $ $19.80 $ $19.80 $ $25.70 $ $25.70 $ $27.30 $ $27.30 $ $29.90 $ $36.80 $ $42.10 $ $47.90 $ $52.10 $ $54.10 $ $66.90 $ $73.40 $ $82.20 $ $90.80 $ $99.50 $ PRT NO "-24" made from galvanized steel 14 gauge, SS is 16 gauge Over 24" made from 3/16" flat bar steel Clearance hole 5/16" olts are supplied with hanger QF Pipe Hanger HJ HJ $15.70 $ HJ $15.70 $ HJ $17.60 $ HJ $19.90 $ HJ $19.90 $ HJ $23.80 $ HJ $29.40 $ HJ $31.30 $ HJ $34.70 $ HJ $34.70 $ HJ $39.60 $ HJ $39.60 $ HJ $51.40 $ HJ $51.40 $ HJ $54.30 $ HJ $54.30 $ HJ $59.80 $ HJ $73.40 $ HJ $84.50 $ PRT NO. 3265HJ 2 ½" to 3" gap 3"-24" made from galvanized steel 14 gauge, SS is 16 gauge Clearance hole 7/16" olts are supplied with hanger HNGERS & INSTLLTION -Denotes an item that is returnable. See page 51 for a full listg of returnable items DuctgSystems.com 33

34 QF Clamp Hanger SS QF000 $22.10 $ QF000 $22.10 $ QF000 $24.50 $ QF000 $27.90 $ QF000 $27.90 $ QF000 $33.40 $ QF000 $41.20 $ QF000 $43.90 $ QF000 $48.70 $ QF000 $48.70 $ QF000 $59.30 $ QF000 $59.30 $ QF000 $71.90 $ QF000 $71.90 $ QF000 $76.20 $ QF000 $76.20 $ QF000 $83.60 $ QF000 $ $ QF000 $ $ PRT NO D 2 ½" to 3" gap Tested by MET Laboratories to hold, without failure, up to 170lbs for 9" hanger and up to 850lbs for 20". QF Strut Hanger Size SS MH000 $11.90 $ MH000 $11.90 $ MH000 $13.20 $ MH000 $15.10 $ MH000 $15.10 $ MH000 $17.90 $ MH000 $22.20 $ MH000 $23.50 $ MH000 $26.00 $ MH000 $26.00 $ MH000 $29.80 $ MH000 $29.80 $ MH000 $38.50 $ MH000 $38.50 $ MH000 $41.00 $ MH000 $41.00 $ MH000 $44.80 $ MH000 $55.40 $ MH000 $63.30 $ PRT NO Tested by MET Laboratories to hold up to 170lbs for 9 and up to 850lbs for 20 without failure. For strut channel mountg (strut not cluded). Nut and bolt cluded. HNGERS & INSTLLTION 34 The world s fastest ductg

35 QF Wall Flashg $46.40 $ $48.80 $ $58.30 $ $63.00 $ $65.60 $ $73.50 $ $77.40 $ $85.80 $ $89.50 $ $97.30 $ $ $ $ $ $ $ $ $ Can be ordered with Raw Collar with or without lip. Wall Flashg PRT NO Wall Provides cover for wall penetration. Orderg one Flashg provides you with both 1 side and 1 outside flashg (4 halves). Inside Dia. + 8 Inside Dia. Outside Flashg Inside Flashg Made Two Halves QF Roof Flashg $46.40 $ $48.80 $ $58.30 $ $63.00 $ $65.60 $ $73.50 $ $77.50 $ $85.80 $ $89.50 $ $97.30 $ $ $ $ $ $ $ $ $ Roof Flashg PRT NO DI. Pipe 3/4 (LIP) 6 Roof 12 Le Provides cover for roof penetration. SKIRTS Counter Flashg attached to ductwork Roof Flashg attached to roof O.D. Note: Roof pitch cannot be less than 23. Roof Flashg made In 2 halves, caulked and riveted. QF Roof Skirt $54.80 $ $62.10 $ $63.10 $ $74.40 $ $74.40 $ $88.70 $ $88.70 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Roof Skirt PRT NO Note: Roof pitch cannot be less than 23. Provides weather protection for roof penetration. HNGERS & INSTLLTION DuctgSystems.com 35

36 QF No-Loss Stackhead Ends QF 22 $86.30 $ QF 22 $86.30 $ QF 22 $89.80 $ QF 22 $95.60 $ QF 22 $ $ QF 22 $ $ QF 22 $ $ QF 22 $ $ QF 22 $ $ QF 22 $ $ QF 20 $ $ QF 20 $ $ QF 20 $ $ QF 20 $ $ QF 20 $ $ QF 20 $ $ QF 20 $ $1, QF 20 $ $1, QF 20 $ $1, FLNGE 20 $ $1, FLNGE 20 $ $1, FLNGE 18 $ $1, FLNGE 18 $ $1, FLNGE 18 $ $1, FLNGE 18 $1, $1, FLNGE 18 $1, $2, FLNGE 18 $1, $2, Short QF duct section bracketed to upper stack PRT NO ngle Flange for guide wires 6 6 D + 1 D Used when exhaustg from fans or stacks through roof. Elimates back pressure on fan while providg weather protection. Flange for guide wire attachment. 4 x D +6 = L QF Jet Cap W H Ends SS QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ PRT NO QF $ $1, QF $ $1, W QF $ $1, QF $ $1, QF $ $2, FLNGE $1, $2, FLNGE $1, $2, FLNGE $1, $2, FLNGE $1, $2, FLNGE $1, $2, FLNGE $1, $2, FLNGE $1, $3, FLNGE $2, $3, H Prevents ra from enterg ductg. Inner funnel piece allows ra to dra out of ductwork even when system is not runng. Has three angle brackets for guide wire attachment. Installs seconds with standard QF Clamp. CCESSORIES 36 The world s fastest ductg

37 QF Silencer OD Ends Length (C) Housg QF $ $ QF $ $1, QF $ $1, QF $ $1, QF $ $1, QF $ $1, QF $ $1, QF $ $1, QF $ $1, QF $1, $1, QF $1, $2, QF $1, $2, QF $1, $2, QF $1, $3, QF $1, $3, FLNGE $2, $5, FLNGE $2, $5, FLNGE $2, $5, FLNGE $2, $5, FLNGE $2, $5, FLNGE $3, $6, FLNGE $3, $6, FLNGE $3, $6, OD PRT NO Reduces sound levels from fans and equipment. Due to varyg applications, no decibel testg has been performed on this product. OD QF In Le ack Draft Damper Ends Length Length QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $1, QF $ $1, QF $ $1, QF $ $1, QF $ $1, FLNGE $1, $1, FLNGE $1, $1, FLNGE $1, $2, FLNGE $1, $2, FLNGE $1, $2, D+2 D PRT NO D DOOR Used to reduce backward air flow the le. Designed for use a horizontal le. Specify if vertical operation is required. Not an explosion isolation device. 2 D QF Suction Nozzle ssembly Ends () QF $97.50 $ ffix to end of hose for suction cleang. 4" hose connection. PRT NO CCESSORIES DuctgSystems.com 37

38 QF Vibration Isolator Ends Items may take longer than standard lead times. Length (L) QF $80.00 $ QF $80.00 $ QF $86.90 $ QF $95.70 $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF $ $ QF 7 20 $ $ FLNGE $ $1, FLNGE $ $1, FLNGE $ $1, FLNGE $ $1, FLNGE $ $1, FLNGE $ $1, FLNGE $ $1, FLNGE $ $2, PRT NO L ir Flow D Reduces vibration from the fan to the ductg system. QF Slidg ccess Panel Pipe Length/ Slide Length ccess Hole ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ ches/18 Inches 7 x $ $ PRT NO llows access without removal of pipe. Product length equals nomal pipe length. 6"-24" units have 7" x 14" access hole. Cannot be made shorter than 36". CCESSORIES 38 The world s fastest ductg

39 QF utterfly Valve Ends Length (L) 8 22 $59.50 $ $59.50 $ $59.90 $ $60.50 $ $64.10 $ $64.50 $ $65.40 $ $66.20 $ $69.70 $ QF $69.70 $ $79.70 $ $79.70 $ $85.40 $ $85.40 $ $92.60 $ $92.60 $ $ $ $ $ $ $ PRT NO standard lockg quadrant handle enables users to regulate air volumes clean air applications. For use only clean air applications. L D QF leed- Valve Ends Length (L) No. of Slots $60.30 $ $60.30 $ $69.20 $ $72.10 $ $77.60 $ $80.20 $ $88.30 $ $93.80 $ $98.10 $ QF $98.10 $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ PRT NO Used to adjust airflow to balance system by troducg ambient air. L To djust, Loosen Clamp and Turn Outer Sleeve To Get Proper ir-flow Re-Clamp When Fished D QF all Jot Ends Length (L) $ $ $ QF $ $ * $ * 14" diameter - up to 6 weeks lead time PRT NO llows up to 22º of movement off-center. Odd sizes available upon request, with possibility of up to 6 weeks lead time. Not available SS. L CCESSORIES DuctgSystems.com 39

40 QF Floor Sweep Ends INCH INCH C INCH L INCH. () $ $ $ $ $ $ $ $ $ $ QF $ $ $ $ $ $ $ $ $ $ PRT NO Quick and effective floor cleang. anized or SS (optional) sheet metal with sturdy closg door. ody 20 gauge, door 16 gauge. QF Viewg Spool Ends Length (L) () $ $ $ $ $ $ $ $ $ $ $ $ $ $ QF $ $ $ $ $ $ $ $ $ $ $ $ $ $ PRT NO section of acrylic glass with QF ends to view material flow. ir Flow L D QF In-le Spark Trap H W QF QF F F ( QF) lbs $ $1, $ $1, $ $1, $ $1, $ $1, $ $1, $ $1, $ $1, $ $2, $ $2, $ $2, $ $2, $ $2, $ $2, $ $2, $ $2, $1, $2, $1, $2, $1, $3, $1, $3, $1, $3, $1, $3, $1, $3, $1, $4, $1, $4, $1, $4, $1, $4, $1, $4, irflow Flow PRT NO W Greatly reduces the possibility of fire cyclones / collectors by decreasg the number of sparks which could reach these through the air handlg system. This is accomplished by disruptg the lamar airflow to cause sparks to cool and extguish before they can enter the dust collector / cyclone. No movg parts and no power required for operation. Velocity: fpm NOTE: Does not replace spark detection or explosion isolation devices. Complementary device to existg detection and suppression equipment. H Duct distance recommended: t least ten diameters from dust collector / cyclone and the source (example: 8" duct le, recommended distance is m. 80") Horizontal mountg only. CCESSORIES 40 The world s fastest ductg

41 OIL MIST SYSTEM Nordfab s Oil Mist system consists of three parts: Epoxy Caulkg, Gaskets and O-rgs leak-free duct system is largely dependent on the skill and care of the staller, so Nordfab cannot guarantee a 100% leak free system. However, if users consult the technical data (to ensure that our gasket and sealg materials will stand up to the materials beg conveyed) and take care the stallation process, this system has proven that it can be Leak Free. Leak-Free Epoxy Caulkg Classification: 1. STM D SE43 2. STM D , 91, Leak-Free O-Rg Epoxy caulkg. Good to excellent resistance to most solvents, acids, oils, and alkalides. LEK-FREE EPOXY CULKING IS VILLE ON LL NON-LSER WELDED PRTS. 25% UPCHRGE $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ PRT NO Leak-free Molded Gasket $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ $ Classification: 1. STM D-2000 M2G EO14 EO34 EF11 EF21 Performs well with many oils and chemicals. Temp range: -30 F to +225 F. Can t be damaged by flexg and twistg. This O-Rg works conjunction with Nordfab s standard O-rg. IT DOES NOT REPLCE IT. PRT NO General purpose oil resistant polymer. Performs well many oil, water and hydraulic fluid applications. Should not be used with solvents such as acetone, MEK, ozone, chlorated hydrocarbons, and nitro hydrocarbons. Temp range: -30 F to +225 F. No additional sizes available. QF Oil Mist Recycler affle Size x 14 $ $ x 14 $ $ x 14 $ $ x 14 $ $ x 20 $ $1, x 20 $ $1, x 20 $ $1, x 20 $ $1, x 20 $ $1, PRT NO Installs vertical or horizontal applications. Extracts oil to mimize amount of oil flowg through entire system. Consists of recycler unit, molded gasket, clamp and end cap. 5' clear hose and hose clamp provided for dra tap DuctgSystems.com 41

42 Manifold Specification From: Date: Tel: Please provide the followg formation when orderg a dust collection manifold Connectg Diameter? Floor to Centerle Height? Location of Ma Le? Number of connections Provide a port layout, cludg connection diameters. OUTFEED? INFEED? (circle one) HRD PIPE? FLEX? (circle one) 1 CONNECTING DIMETER - Diameter of existg ma le (optional connectg adapter if different from standard sizes) 2 FLOOR TO CENTERLINE HEIGHT 3 OUTFEED END 3 INFEED END 42 The world s fastest ductg

43 Drawg Service Provide us with basic formation about the job: Material conveyed Mache type and placement Recommended velocity We will provide you with an utocd or PDF file of the drawg, complete with a list of the Nordfab parts set forth the drawg, and a quote. FREE with Order Each QF pipe section is 5 ft. length. To accommodate an existg span, an adjustable nipple is used to shorten. Instructions for Usg the QF djustable Nipple with Rubber O-Rg for Dry System STEP 1 STEP 2 STEP 3 NOTE: KEEP CUT PIPE IN THE SME DIRECTION S THE IRFLOW. Measure distance to be spanned. Mark distance to be spanned less 4". STEP 4 STEP 5 STEP 6 Drill access hole then cut with saw. Cut piece of pipe put O-rg on cut pipe, slide nipple over Use O-rg provided and mark for cut. Snap clamp over O-rg and one end of nipple. ranch Styles 5" 30 4" 90 6" C RNCH 4" 6" =6, =4, 30 Standard Part : XX. When orderg, provide Part and Description. Examples: or ranch T-RNCH 6" =6, 90 Standard Part : When orderg, provide Part and Description. Examples: or T- ranch " 4" C 7" 30 =7, =5, C=4, D=3 D 3" DOULE 30 Standard Part : XX. When orderg, provide Part and Description. Examples: or Double ranch D 4 Y RNCH 8 =8, =6, 60 Standard Part : XX. When orderg, provide Part and Description. Examples: or Y- ranch DuctgSystems.com 43

44 Reducer Styles Y Y L L L Y X X X QF STYLE FLNGED STYLE RW END STYLE ) Reducers are produced by the followg formula: QF LENGTH = (-) + 6" [7" MIN] FL LENGTH = (-) + 8" [9" MIN] ) Standard material gauges as follows: (Heavier gauges available contact NORDF) DI. GLV. GUGE SS GUGE 4" - 12" " - 22" NOTE: ny combation of the above style are available upon request. Please specify all the required dimensions and all reducer end configurations (Raw ID, Raw OD Style, QF Style, Flange Style, etc.). Item Qty Style QF Flange Raw Style QF Flange Raw L (-+6) X STD-2 Y STD-2 Part Flange Material Flange Dwg Special Notes 44 The world s fastest ductg

45 Transition / Hood Styles Transition Rectangular to Round Transition Square to Square PRT NO PRT NO L must be at least 75% of or it will be Square to Square. L of Square to Round (at least 7" mimum). L of Square to Square (4" mimum). y default, X=2, Y=2, and =L (dditional cost for Flange) uilt to your specifications. Please list all required dimensions and details. Specify Rectangle End: Flange Type: Specify Round End: Flanged Raw End I.D. Raw End O.D. ngle ar Flat ar Sheet Metal QF Flanged Hose Conn. Raw I.D. Or O.D. NOTE: If no hole pattern is supplied for flanges, they will be supplied lank to be field drilled. L = the greater of or D. Item Qty. D X Std 2 Y Std 2 L Flange Material Flg Dwg Special Notes Specify dimensions,, D, and L. lso available with flanged connections. Specify flange pattern. If no hole pattern is supplied for flanges, they will be supplied blank to be field drilled. Standard flange material is 1-1/2 x 3/16 THK angle. Diameter sizes exceedg 24 will be supplied with a flange. Standard length is equal to dimension, unless otherwise specified. s are determed by the rectangular dimension of style 1. dd for Flange on style 2. NOTE: Square to square transitions are made when the customer s specified length is less than 75% of the dimension DuctgSystems.com 45

46 Installation Tips STEP ONE: Make Sure Your Shipment is Complete and Undamaged. Nordfab ships most orders FO Nordfab or Free On oard. This means that it is your responsibility to ensure that the materials you receive do not have freight damage and that the carrier has delivered all the boxes your shipment. Inspect all boxes for outward damage EFORE signg for receipt. The boxes should be strapped to a pallet, and not be crushed, torn, or otherwise damaged. If you fd damage, either refuse the shipment or note the issue on the receipt you sign. Unless you do this, any future claims will be virtually impossible to collect. dditionally, before signg for your shipment, ensure that all boxes are accounted for. You can fd the number of boxes a shipment by checkg the delivery receipt the driver will ask you to sign. ga, note any discrepancies before signg. IMPORTNT SFETY NOTE: eware of the sharp metal staples used to seal the shippg boxes. Useful Tools and Important Safety Information: lways use proper safety equipment when stallg Quick-Fit Work Gloves Eye & Ear Protection Safety Helmet Cuttg Device File Scaffoldg Level Plumb STEP TWO: Understandg the Packg Documents. Nordfab packs boxes with the goal of reducg shippg costs, not the order the parts are needed. Do not simply tear to the boxes and beg removg parts. t least one box on each order will conta Nordfab s Packg List. Locate these documents before openg any boxes as it will give you details as to what is each box. void openg a box until you need its contents, to reduce the chance of parts beg lost or damaged on site. If you have any problems, call your dealer as he is the best position to rectify any problems with your particular order. Have all packg documentation with you when you call. STEP THREE: Preparg to Install Your Ductg. It is important for the staller to understand the layout that the system designer planned for the ductg. Follow all local codes and regulations and note loadg capabilities of structures to ensure the ductg is properly supported and that the buildg can carry the ductg system. If your staller doesn t understand the layout, he will not have all the parts necessary to complete the job. If you do not have a clear understandg or drawg of the system you are about to stall, please call the person who designed the system before you beg work. STEP FOUR: Layg out the duct. eg by layg the system out on the floor below where it will hang. Remember that two parts that connect will often not be the same box, so this step dramatically reduces the time it takes to complete the job once the stallation begs. NOTE: This is the step where you could possibly fd that you do not have all the parts necessary to complete the job. In that case, contact your dealer immediately so that he can get a head start on gettg the needed parts to you as well as help you verify that your layout matches the one planned by the system designer. STEP FIVE: The djustable Nipple. One of the most important benefits of Quick-Fit is that it is not necessary to take exact measurements before cuttg each piece of pipe. The djustable Nipple is an 11-ch section of pipe that has a slightly larger diameter than a standard QF duct. STEP SIX: Supportg Your Ductwork. Nordfab has a variety of duct hangg devices, but it is your responsibility to ensure the safety of all ductg. Please check with local agencies to ensure that your ductg is supported a way that meets local codes. When determg the weight that your ceilg and hangers must support, always allow for the ductg beg 100% clogged with whatever material is beg conveyed. STEP SEVEN: Pre-Stretch Your Clamps. Nordfab QF clamps are designed to provide a tight seal, which means that they also require some pressure to close. y pre-stretchg the clamp around the rolled edge of a sgle piece of pipe, you can make it much easier to close when you connect two pieces together. STEP EIGHT: Clamp s Many Parts Together s Possible on the Ground. It is much faster and easier to close the clamps on stable ground than on a scaffold. Therefore, many stallers connect two or three pieces of ductwork together on the floor before liftg them to place. STEP NINE: Use the Cotter Ps. fter closg each clamp, stall one of the enclosed cotter ps to the hole as shown. This ensures that the clamp cannot come open unexpectedly. Install the cotter p as soon as a clamp is closed and beware of clamps until the cotter p is safely stalled. IMPORTNT SFETY NOTE: On very rare occasions, unpned clamps can sprg open unexpectedly which can cause the pipe to drop. dditionally, the handles on unpned clamps have been known to cause jury when they sprang open. 46 The world s fastest ductg

47 TKE OFF SHEET DuctgSystems.com 47

48 Sizg a QF Pipe System Nordfab offers assistance to those salespeople and customers who have never designed a pipg system. We can assist you determg the correct pipe size and configuration that will supply you with the correct flow. Please call an Inside Sales Representative for assistance. ( CFM) ranch 30 5"x 90 Elbow EXMPLE: lways work from your maches back toward the filter. Suppose that you have a 5" drop that rises and runs back to jo with a 6" drop as sketched above. What size branch will you need? 6" x 60 Elbow 6" 885 CFM 8" Dia (1500 CFM) From ir Volume Chart 5" x 90 Elbow 5" 615 CFM The 5" pipe carries 615 CFM at 4500 FPM, (See chart). The 6" pipe will need 885 CFM at the same velocity (See chart). dded together you have a total of ( ) 1500 CFM comg together. ranch 30 6" x 60 Elbow ir Volume Chart USING THE CFM/ FPM CHRT This chart allows you to choose the correct pipe size for the CFM that is required. Different materials need to be conveyed at different velocities to prevent the material from fallg out of the air stream. For example, wood chips and saw dust flow well at 4500 feet per mute. Referrg to the chart, a 4" pipe will convey 395 CFM at 4500 FPM. This dicates that a 4" pick-up on a mache will use 395 CFM from the filterg system. Or workg reverse, if you know that a mache will require approximately 400 CFM to remove the waste, then you should design a 4" pipe for the application. DUCT 6" 885 CFM 5" 615 CFM Lookg aga at the chart under 4500 FPM, you fd that 1500 CFM is not listed, but falls very close to the 1570 CFM listed for an 8" pipe. This dicates that the 5" joed to the 6" will require an 8 pipe to carry all of the material at the right velocity. The branch, therefore, will be 8" on the downstream end reducg down to a 5" with a 6" branchg off of it. That is listed as an branch. IR VOLUME IN DUCTS IN CUIC FEET PER MINUTE (CFM) VELOCITY IN FEET PER MINUTE (FPM) The world s fastest ductg

49 SHIPPING DETILS Shippg Details LTL (Less Than Truckload) Shipments We have worked with virtually every carrier and keep record of their strengths and weaknesses. Sometimes we do not select the least expensive carrier because we are dissatisfied with its damage rate, reliability, or its willgness to solve issues when they arise. The term est Way means different thgs to different people. We terpret this to mean cheapest reliable carrier that can meet our (your) delivery requirements. If your meang differs, then let us know your priorities. LTL carriers have mimum charges. So one or two parts a box may be the most economical and safest way to package them. While we can ship freight any class, we have negotiated very large discounts for FK Class 100 which covers virtually all of the products we sell. When the dealer specifies a carrier, we use that company, regardless of our own experience. When arrangg or specifyg your own carrier, make sure the service offered is door-to-door service without another carrier beg volved as this may add costs and delays. LTL carriers have a mimum charge of all orders less than 150 pounds. So when you order one or two parts, you may be surprised when they arrive strapped to a whole pallet or one very large box. We have found that this method reduces the stances for damage without creasg the costs. While it is possible and economical to strap items to the top of large boxes, it is not standard practice for two reasons: a) The stance of damage creases dramatically. b) We can easily load these boxes at our level docks. However, customers have found it very difficult to unload trucks at the job site where there is no guarantee of a level dock or an experienced forklift driver. Sometimes it is possible and safe to stack items or boxes on top of our standard cartons, so we can use this method to save shippg costs. HOWEVER, it is up to you to let us know when this stackg is unacceptable and it is up to you to work with the freight companies to get reimbursement for any damaged items. It is possible to stack some items on top of boxes, but it can lead to damage and problems when unloadg the shipment. There is an additional charge for any item that is too large to fit on a standard pallet. This cludes loose items not attached to any pallet. lso, we know from experience that havg an item hang over the edges of the pallet is a recipe for freight damage, so we use larger pallets (at the higher rate) when necessary. NOTE: a standard skid is 40" X 48" X 65" tall. Oversized or loose items can affect shippg rate. When possible, Nordfab nests smaller pipe side larger pipe to save space. We have learned from experience that this is not always practical. If the smaller diameter pipe is dramatically smaller than the pipe it nests to, or if the smaller pipe is flanged, then there is a high probability that both pipes will be damaged shipment. Occasionally dealers send several different orders to the same address on the same day. You can save money by havg Nordfab package multiple orders onto a sgle pallet. The dividual boxes will be marked with the order number. This multiple packagg can cause confusion on site, so it is not our standard practice. If you want multiple orders packaged together it must be noted on your purchase order FOR LL ORDERS TO E PCKGED TOGETHER. NOTE, you may be able to save even more on shippg if you struct us NOT to separate the orders. For example, if pipe for three different orders is nested together, it takes up much less room than havg three sets of pipe separated to separate compartments. However, this method requires the parts to be separated on site. No LTL shipment should exceed more than SIX pallets or our discount is elimated and an expensive flat rate per mile fee is charged. For this reason, if your order contas more than six pallets, we will split it to multiple shipments or use a dedicated truckg company. Splittg up shipments causes a bit of extra paperwork for us, and you ll need to form the people who receive your shipments on site. ut the extra work is worth the savgs. Nested Pipe Nordfab packages items the most economical manner, based on experience. UPS Shipments Unlike standard LTL shipments, UPS does charge by the size of the box, so Nordfab always cuts boxes down as small as practical when shippg via UPS. The largest pipe we can ship economically via UPS is 14". The largest elbow is a 14" 90 elbow. The largest volume box we can ship economically via UPS is 24" X 24" by 24". When you need next day delivery, specify WHEN you need the item on site. There are three levels of UPS Red service for most shippg pots (delivered by 8:30 a.m., 10:30 a.m., or 5:00 p.m.). The later the delivery, the less the cost. Nordfab s default is 10:30 a.m. If you need the product earlier - or can accept it later- please let us know. If you don t need the part until the afternoon, shippg costs will be slightly cheaper DuctgSystems.com 49

50 CONDITIONS OF SLE Nordfab Products Conditions of Sale GENERL CONDITIONS OF SLE The Terms and Conditions of acceptance of sale as set forth here, Nordfab, LLC (Nordfab) s Order cknowledgment and all drawgs, specifications, and descriptions, if any, and any other documents attached hereto or transmitted herewith and corporated here by reference, constitute the entire agreement between Nordfab and the uyer (hereafter the greement ). Nordfab s acceptance of uyer s order is expressly conditioned upon uyer s consent to the Terms and Conditions set forth here. In no event shall any conflictg or different terms uyer s order become part of this greement unless Nordfab explicitly agrees to such writg or expressly corporates such terms to this greement. The failure of Nordfab to object to any provision conflict with these Terms and Conditions whether contaed uyer s purchase order or otherwise, shall not be construed as a waiver of the provisions of the greement or the Terms and Conditions contaed here nor as an acceptance thereof. ny prior oral or written statements or proposals provided by Nordfab are prelimary only unless otherwise agreed and confirmed writg. If any of the terms and conditions contaed any prior oral or written statements or proposals by Nordfab conflict with these General Terms and Conditions of Sale, these General Terms and Conditions of Sale shall prevail. This greement is deemed to be executed and performed the State of North Carola, and shall be governed, construed, and enforced accordance with the laws of the State of North Carola, excludg that State s conflict of law prciples, as to all matters arisg out of or relatg to this greement. Nordfab and the uyer exclude the application of the 1980 United Nations Convention on Contracts for the International Sale of Goods if otherwise applicable. In the event of any controversy, claim, or dispute between Nordfab and uyer arisg out of or relatg to this greement, such controversy, claim, or dispute shall be tried exclusively the General Court of Justice, Superior Court Division for the State of North Carola with venue beg Davidson County, North Carola. If any provision of this greement is held to be illegal, valid or otherwise unenforceable a judicial proceedg, then such provision shall be severed and shall be operative provided that the fundamental terms and conditions of this greement rema legal and enforceable, the remader of this greement shall rema operative and bdg on Nordfab and uyer. LIMITED WRRNTY Nordfab warrants that the products sold hereunder conform to any applicable drawgs and specifications attached hereto and will be free from any defects material and workmanship which become apparent under normal use. This limited warranty applies to the origal uyer only and is non-transferrable. To make a claim under this limited warranty, uyer must give written notice to Nordfab with a period of 12 months from the date of stallation or 12 months from the date of shipment, whichever period first expires. If, with that period, Nordfab receives from uyer written notice of any alleged defect or non-conformance of any product covered by this limited warranty and if, Nordfab s sole judgment, the product does not conform with this limited warranty, then uyer shall, at Nordfab s request, return the part or product F.O.. Nordfab s shippg pot. Nordfab, at its sole option and expense, shall then repair or replace the defective part or product or repay uyer the full price paid for such part or product. Dismountg of defective or nonconformg parts and remountg of any repaired or replaced parts is at uyer s sole expense. This Limited Warranty, as it relates to the delivery of spare parts or replacement for non-conformg parts, expires when the limited warranty for the origal product or equipment expires. ny repayment of purchase price shall be without terest. NORDF S SOLE RESPONSIILITY, ND UYER S EXCLUSIVE REMEDY HEREUNDER, SHLL E LIMITED TO SUCH REPIR, REPLCEMENT, OR REPYMENT OF THE PURCHSE PRICE S OVE PROVIDED. NO OTHER WRRN- TIES, EXPRESS, STTUTORY, OR IMPLIED, RE MDE ND NY ND LL IMPLIED WRRNTIES OF MERCHNTILITY, QULITY, OR FITNESS FOR PRTICULR PURPOSE RE EXPRESSLY DISCLIMED. This limited warranty does not cover and Nordfab makes no warranty with respect to: ) failures not reported to Nordfab with the warranty period specified above; ) failure or damage due to misapplication, abuse, improper stallation or abnormal conditions of any kd, cludg, but not limited to, temperature, dirt or other corrosive matter; C) failures due to operation, either tentional or otherwise, above rated capacities or an otherwise improper manner; D) products which have been any way tampered with or altered by anyone other than an authorized representative of Nordfab; E) products damaged shipment or otherwise without fault of Nordfab; F) expenses curred by uyer an attempt to repair, rework, or replace any alleged defective product; and G) defects material and workmanship which are attributable to drawgs and specifications provided by uyer. TERMS OF PYMENT Unless agreed to writg by Nordfab s Sales Manager, the terms of this greement are NET 30. If the full purchase price is not paid by uyer NET 30, then terest shall accrue at the rate of 1.5% per month. uyer agrees that if Nordfab is required to brg suit to collect any sums due Nordfab under this greement, then uyer shall be responsible for all costs and expenses curred by Nordfab, cludg but not limited to Nordfab s reasonable attorney s fees. CLIMS FOR SHORTGES ny claims for loss, breakage (obvious or concealed), or shortage are uyer s sole responsibility and should be made to the carrier immediately. Nordfab will render uyer reasonable assistance securg satisfactory adjustment of such claims. ny notice of shortages or other errors must be made writg to Nordfab with 30 days after receipt of shipment. Failure to give such notice shall constitute unqualified acceptance of the product and a waiver by uyer of all claims agast Nordfab for loss, breakage or shortage. Risk of loss for damage to products sold under this greement passes to uyer when the carrier takes custody of any of the products purchased under this greement regardless of who pays shippg costs. LIMITTION OF LIILITY Nordfab s sole responsibility and uyer s sole and exclusive remedy with respect to any alleged breach of the limited warranty, as set forth above, or any other claim under this greement shall be limited to repair, replacement or repayment of the purchase price at Nordfab s sole discretion. Nordfab s total responsibility for any and all claims, damages of any nature, losses, liabilities or costs of corrective efforts, cludg, but not limited to, those relatg to any limited warranty or claim arisg out of or related to performance of this greement or the products covered hereunder or the performance thereof shall not exceed the total purchase price of the product(s) covered by this greement. IN NO EVENT SHLL NORDF E LILE FOR NY SPECIL, INDIRECT, INCIDENTL, OR CONSEQUENTIL DMGES OF NY CHRCTER; INCLUDING, UT NOT LIMITED TO, LOSS OF USE OF PRODUCTION FCILITIES OR EQUIPMENT, LOST PROFITS, PROPERTY DMGE, EXPENSE INCURRED IN RELINCE ON NORDF S PERFORMNCE HEREUNDER, OR LOST PRODUCTION, WHETHER SUFFERED Y UYER OR NY THIRD PRTY. Nordfab specifically disclaims all liability for any and all costs, claims, demands, charges, expenses or other damages, either direct or direct, cident to all property damages arisg out of any cause of action based on strict liability. RETURN GOODS UTHORIZTION To return products to Nordfab, dealers must fill out an RG Worksheet. The RG can be requested from Nordfab s Sales Department. Each RG must be filled out completely. bsolutely no shipments will be accepted by Nordfab without an RG. Shipments without RGs will be returned to shipper at shipper s expense. No RG will be issued for any order more than 90 days from the origal ship date. If issued, an RG is valid for 30 days from date of issue. Nordfab products must be received at our designated return pot factory with that 30 days order for the dealer to receive credit. Only restockable items may be returned to Nordfab. Restockable items are identified Nordfab s price list with a pound sign ( ) after the list price. ll other items are considered custom or special order and are nonreturnable. Nordfab reserves the right to limit return quantities. ll returned goods must be shipped freight prepaid. ll Nordfab ductwork must be shipped vertically with rolled edge down to avoid currg out-of round damage durg shippg. There is a 25% restockg charge for all returned goods. ll components must arrive as-new sellable condition. Damage and white rust occur over time at job sites, which may cause the items to not be sellable. Fal determation of sell ability will be determed by Nordfab, at its sole discretion. ORDERING NOTES: Unless specified, 3" through 24" is QF, over 24" is flanged. Data is subject to change without notice. Staless steel components requirg flanges will be supplied with SS flanges unless otherwise specified. Staless steel components are manufactured with No.304 SS. [Call for SS 316 s] ddg SS after standard part numbers specifies a SS part. For special parts or items to be custom manufactured, call for quotation. 50 The world s fastest ductg

51 RETURN GOODS CHRT Return Goods Chart anized Flex Hose Clamp QF Clamp djustable Nipple Incl. O-Rg Pipe 5' Length (3" is 60") O-Rg RED O-Rg LCK Pipe Hanger QF Clamp ngle Flange dapter Flex Hose dapter Mache dapter, Standard is QF to ID utomatic last Gate last Gate Elbows djustable Nipple Incl. O-Rg Pipe 5' Length (3" is 60") Standard Radius Long Radius Std 3285 INCHES o 60o 45o 30o 90o 60o 45o 30o O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 2 O 5 O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 3 O 7 O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O 4 O 9 O O O O O O O O O O O 5 O 10 O O O O O O O O O O O O O O O O O O 6 O 12 O O O O O O O O O O O O 7 O 13 O O O O O O 8 O 14 O O O O O O O O O O O 9 O 15 O O O O O O 10 O 16 O O O O O O O O O O O O O O O 12 O 18 O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O O ranches Reducers Gripple Hangers O = Returnable item Nordfab reserves the right to limit quantities of any returned items Size Up to 22 lbs O Up to 100 lbs O Reducer 5-4 O Reducer 6-4 O Reducer 6-5 O ranch QF Standard O ranch QF Standard O ranch QF Standard O There is a 25% restockg charge for all returned goods. ll components must arrive as-new sellable condition. Fal determation of sell-ability will rest solely with Nordfab. Up to 200 lbs O Up to 495 lbs O Up to 715 lbs O Reducer 7-4 O Reducer 7-5 O ranch QF Standard O ranch QF Standard O ranch QF Standard O Reducer 7-6 O Reducer 8-4 O Reducer 8-5 O Reducer 8-6 O Reducer 8-7 O DuctgSystems.com 51

52 Don t miss out on all the ways Nordfab can help you market Quick-Fit Take advantage of our onle resources at DuctgSystems.com: Product Catalog Part no pplications Clampdown Sheet Part no How to Design a System Product Technical Data Oil Mist System Pipe Hangers Nordfab Drawg Service Manifold Spec. Sheet pplications rochures Your Local Ductg Expert: ir Cleang Specialists, Inc. 826 Horan Drive Fenton, MO fo@ductgsystems.com Part no /10/18 The world s fastest ductg