Rex 1701 Multiflex Chain
|
|
- Arleen Matthews
- 6 years ago
- Views:
Transcription
1 1701 DIRECTION OF TRVE M. Sideflex Cha Drawg Cha (Straight) 2.19 (55.6 ) 18 (4.5 ) (Curve) 2.34 (59.4 ) Rex 1701 Multiflex Cha Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate desc /ft / m N/ M. Backflex 50 (38.1 ) Cha Pitch 97 (50 ) Height Over Centerle 50 (.7 ) Cha Height 98 (24.9 ) P Diameter 32 (8.1 ) Prefix S CR D FR HP WHP F WF MR P DUV BWR PS WX Cha ntistatic Extreme Chemical Pla cetal Flame Retardant High Performance High Performance ow Friction ow Friction Melt Chemical Ultraviolet Wear Platum Series Green brasion Polyamide vailable s Temperature Cha Standard Fahrenheit Celsius FD Strength P pproval m m N Staless 0 18 Staless ,135 Staless Staless Staless Staless Staless Staless Staless Staless Staless 0 18 Staless 720 3,203 Staless Staless Standard materials are highlighted. ll other materials are available on a madetoorder basis subject to mimum order requirements. Cha strength is listed at room temperature. = Not Recoended. Regulatory Information The Food and Drug dmistration (FD) accepts certa materials for direct food contact. FD approved material is compliant to FD 21 CFR 177. Rexnord, Rex, Platum Series, HP and PS are trademarks of Rexnord Industries, Inc. ll rights reserved. dditional Notes Stocked 61 pitch, ft (3.048 m) length strands. 2. Zc plated carbon steel ps are available on a madetoorder basis. 3. P material can be identified by pivot color; black pivots dicate staless steel ps and tan pivots dicate zc plated carbon steel ps. Rex 1701 Series Multiflex Cha Product Portfolio MF
2 Rex 1701 TB Multiflex Cha 1701 TB DIRECTION OF TRVE M. Sideflex Cha Drawg TB 2.63 (66.8 ) Cha Straight 2.34 (59.5 ) 18 (4.5 ) Curve 2.25 (57.2 ) Cha Top to TB Top 75 (19.1 ) Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate desc /ft / m N/ M. Backflex 50 (38.1 ) Height Over Centerle 50 (.7 ) Cha Height 98 (24.9 ) Cha Pitch 97 (50 ) P Diameter 32 (8.1 ) Prefix S CR D HP WHP F WF MR P DUV BWR PS WX Cha ntistatic Extreme Chemical Pla cetal High Performance High Performance ow Friction ow Friction Melt Chemical Ultraviolet Wear Platum Series Green brasion Polyamide vailable s Temperature Cha Standard Fahrenheit Celsius FD Strength P pproval m m N Staless 0 18 Staless ,135 Staless Staless Staless Staless Staless Staless Staless ,135 Staless 0 18 Staless 720 3,203 Staless Staless Standard materials are highlighted. ll other materials are available on a madetoorder basis subject to mimum order requirements. Cha strength is listed at room temperature. = Not Recoended. Regulatory Information The Food and Drug dmistration (FD) accepts certa materials for direct food contact. FD approved material is compliant to FD 21 CFR 177. Rexnord, Rex, Platum Series, HP and PS are trademarks of Rexnord Industries, Inc. ll rights reserved. dditional Notes Stocked 61 pitch, ft (3.048 m) length strands. 2. Zc plated carbon steel ps are available on a madetoorder basis. 3. P material can be identified by pivot color; black pivots dicate staless steel ps and tan pivots dicate zc plated carbon steel ps. 4. HC1731 is BWR 1701TB with special hardened carbon steel ps. MF Rex 1701 Series Multiflex Cha Product Portfolio
3 C 1701 TB Cha is shown ow Friction (F) material. Cha Information Cha M. Sideflex pproximate desc /ft / m N/ DIRECTION OF TRVE M. Sideflex M. Backflex 50 (38.1 ) Cha Pitch 97 (50 ) Cha Drawg TB 2.63 (66.8 ) Cha Height Over Centerle 50 (.7 ) P Diameter 32 (8.1 ) Straight 2.34 (59.5 ) Cha Height 98 (24.9 ) 20 (5.1 ) Curve 2.25 (57.2 ) Cha Top to TB Top 75 (19.1 ) Rex 1701 TB Multiflex Cha with rmorclad Surface Prefix S HP WHP F WF Cha ntistatic High Performance High Performance ow Friction ow Friction vailable s Temperature Cha Standard Fahrenheit Celsius FD Strength P pproval m m N Staless 0 18 Staless Staless Staless Staless Standard materials are highlighted. ll other materials are available on a madetoorder basis subject to mimum order requirements. Cha strength is listed at room temperature. = Not Recoended. Regulatory Information The Food and Drug dmistration (FD) accepts certa materials for direct food contact. FD approved material is compliant to FD 21 CFR 177. Rexnord, Rex and HP are trademarks of Rexnord Industries, Inc. ll rights reserved. dditional Notes Stocked 61 pitch, ft (3.048 m) length strands. 2. Zc plated carbon steel ps are available on a madetoorder basis. 3. P material can be identified by pivot color; black pivots dicate staless steel ps and tan pivots dicate zc plated carbon steel ps. Rex 1701 Series Multiflex Cha Product Portfolio MF
4 1700 Semi Sprocket N1700 Thermoplastic Sprocket 1700 Idler Wheel 44 ( ) Face 43 (19 ) Face 2.00 (58 ) Face ength thru Bore 56 (39.6 ) Bore Diameter Pitch Diameter Outside Diameter ength thru Bore 88 (47.8 ) Bore Diameter Pitch Diameter Outside Diameter ength thru Bore 2.14 (54.4 ) Bore Diameter Outside Diameter Rex 1701 Series Multiflex Cha Compatible Sprockets 1700 Semi Sprocket Information Bore Diameter (ShaftReady) Pitch Outside Bore Diameter (Round) pproximate Round Square of Teeth Diameter Diameter actual effect m m m m m m / 4 19/ / 4 13/ / 4 13/ 3/ 4 13/ / 4 13/ 3/ 4 13/ Shaftready round bore sprockets are shipped with keyway and setscrew. of Teeth Pitch Diameter Outside Diameter N1700 Thermoplastic Sprocket Information Round Bore Diameter (ShaftReady) Hex Bore Diameter (Idler) pproximate actual effect Equivalent Tooth Size Outside Diameter 1700 Idler Wheel Information Bore Diameter (Idler) pproximate / Idler wheels are designed to sp freely on the shaft. MF Rex 1701 Series Multiflex Cha Product Portfolio
5 Corner Track (Two Piece) Track ngle 90 Nomal Corner View Bevel ngle 8.0 Corner track number supplied as one 90 side and one 90 outside track, which can be used as either carry or return. View ccomodates Top Nomal Corner pproximate Corner Track Color N24B N24R U24R UHMWPE Nylatron is a registered trademark of Quadrant Engeerg Plastics Products. Track ngle.0 (Each Track) Gap Between Each Track 1 (3 ) Nomal Corner Corner Track (Four Piece) View View Bevel ngle (762 ) radius furnished two segments to make one 90 unit. Corner track number supplied as two side tracks and two outside tracks, which can be used as either carry or return. Rex 1701 Series Multiflex Cha ccessories ccomodates Top Nomal Corner pproximate Corner Track Color N30B N30R Nylatron is a registered trademark of Quadrant Engeerg Plastics Products. Rex 1701 Series Multiflex Cha Product Portfolio MF
6 (Flat Top) C Cha to Cha Center Outside C Rim 78 (19.8 ) to Cha Center 1701 FT FT : lumum Bottom of Cha to Top of Mountg 47 (37.3 ) Mountg 3/4 16 UNC 2 Top of Mountg 34 (8.6 ) 59 (44 ) Top of to Top of Mountg 2.41 (62 ) For 1701 (bevel) cha only. Rex 1701 Series Multiflex Cha ccessories Bottom of Cha to Top of Mountg 47 (37.3 ) C Cha Mountg to Cha Center Outside 3/4 16 UNC 2 C Top of Mountg 34 (8.6 ) (Flat Top) Rim 62 (15.7 ) 59 (44 ) Top of to Top of Mountg 2.41 (62 ) (Raised Hub) to Cha Center 1701TB FT TB FT : lumum For 1701 TB cha only. C Cha to Cha Center Outside C Hub Diameter 2.62 (66.5 ) Top of Hub to Bottom of Rim 2.06 (52.3 ) to Cha Center 1701 RH : lumum Bottom of Cha to Top of Mountg 17 (4.3 ) Mountg 3/4 16 UNC 2 Rib Bottom to 59 (44 ) Rib Bottom to Top of Mountg 34 (8.6 ) Top of Mountg to Top of Rib (28.4 ) For 1701 (bevel) cha only. MF Rex 1701 Series Multiflex Cha Product Portfolio
7 (Raised Hub) C Cha to Cha Center Outside Rim 63 (16.0 ) C Hub Diameter 2.62 (66.5 ) Top of Hub to Bottom of Rim 2.06 (52.3 ) to Cha Center 1701TB RH : lumum Bottom of Cha to Top of Mountg 17 (4.3 ) Mountg 3/4 16 UNC 2 59 (44 ) Top of Mountg 34 (8.6 ) Top of Mountg to Top of Rib (28.4 ) For 1701 TB cha only. Pivot Height 98 (24.9 ) Extended Pivot Please dicate if you require an extended pivot every pitch, every second pitch, etc. when orderg. For 1701 and 1701 TB chas only. Do not use with C 1701 TB cha. Rex 1701 Series Multiflex Cha ccessories Rex 1701 Series Multiflex Cha Product Portfolio MF
Rex 880 TableTop Chain Side-flexing
Prefix S D WD FR HP WHP LF WLF MR P DUV BWR PS WX 880 Cha Information Cha M. Sideflex pproximate desc /ft / m 31/4 3.2 6 18.00 47. 2 60 89 41/2 4.0 3 00 609. 6 70 1.04 Cha ntistatic Pla cetal Pla cetal
More informationRex 881 TableTop Chain Side-flexing
Prefix S SS 881 Cha Information Cha M. Side-flex pproximate Weight desc /ft / m 3-1/4 3.25 82. 6 18.00 7. 2 2.00 2.97 4-1/2 4. 1 3 00 609. 6 2. 3.71 7-1/2 7. 19 5 00 609. 6 3.70 5.49 Cha Carbon Staless
More informationRexnord 880 TAB TableTop Chain
880 Drawing Rexnord 880 TableTop Min. Side-flex 1.63 in (41.4 mm) Overall (42.9 mm) Photo shows 880 TableTop molded in Low Friction (LF) material. Information Min. Side-flex pproximate 3 1/4 3.25 82.6
More informationRex 812 TableTop Chain with Rubber Inserts Straight Running
Prefix SSR 812 Cha is shown Staless Steel with Rubber Insert (SSR) material. Cha Information Cha M. Side-flex Radius Approximate desc /ft / m 3-1/4 82. 6 - - 1.89 2.80 Cha Material Staless Steel with Rubber
More informationRexnord 1757 TAB TableTop Chain
1757 TAB DIRECTION OF TRAVEL Width Drawing Thickness 0.19 in (4.8 mm) 0.94 in (23.9 mm) Rexnord 1757 TAB TableTop Photo shows 1757 TAB TableTop molded in High Performance (HP ) material. Information Width
More informationRexnord FlatTop conveyor chains and components are leading edge solutions designed to continuously improve productivity for customers in every applica
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 11 North America Rexnord FlatTop conveyor chains and components are leading edge solutions designed
More informationDownload the most up-to-date version at KleanTop Belt Product Catalog
Download the most up-to-date version at www.rexnord.com/documentation KleanTop Belt Product Catalog Conveniently Accessible Online Information We realize the success of your business depends on up-to-date
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More information7956 Series MatTop Chains Design Manual Series MatTop Chains
7956 Series MatTop Chains Design Manual 7956 Series MatTop Chains 1 Contents Safety Considerations/Introduction...2-3 Chain Selection - Selection Criteria...4 - Specifying and Part Number Nomenclature...5
More informationFLEXBELTS BENEFITS PROGRAMME AND...
FLEXBELTS 505, 1255 and 7956 flexbelts are predominantly suitable for sideflexing transport of packages and clustered products, such as shrink-wrapped products and 4- and 6-packs. The 505 has a 0.5 inch
More informationPRODUCT CATALOGUE 2006/2007 REXNORD / MCC FLATTOP EUROPE TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2006/2007 REXNORD / MCC TABLETOP AND MATTOP CHAINS FLATTOP EUROPE INDEX PAGE COMPANY PROFILE 4 OVERVIEW TABLETOP CHAINS 6 INTRODUCTION STEEL SLATBAND CHAINS 8 STEEL SLATBAND CHAINS 10
More informationPRODUCT CATALOGUE REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE REXNORD / MCC ISSUE 12 TABLETOP AND MATTOP CHAINS FlatTop Europe NEW IN THIS CATALOGUE: FEATURES 2012 Combi-X New Magnetflex Curves FT 1055TAB-K450 Chainbelts NSH 1005 Split sprockets
More informationP (Nominal) L T mm in N lbf kg/m lb/ft
Datasheet: uni C C Rough EN lastic Modular elt Series uni C Rough Running direction elt material & color OM-NLS K OM-NL K in material & color 6.6 N Non standard material and color: See uni Material and
More information1000-SERIES MODULAR BELTS
1000-SERIES MODULAR BELTS The 1000-series belt is multifunctional. The pitch is 1 inch. BENEFITS Perfect product handling 1000-Series belts have a relatively small 1 pitch, the material has a very low
More informationExtra Heavy Duty Modular Belts 2508 & 2630 Series
Extra Heavy Duty Modular Belts 2508 & 2630 Series Applications Dual Strand Test Tunnel Sgle Strand Car Wash Individual Pushers Mount Easily On Belt Surface Pictures by courtesy of Hohmeier Anlagenbau GmbH
More informationMartin Series 800 Conveyor Sprockets
800 Series Martin Series 800 Manufactured From High Quality Semi-Steel THE NEW QRS SPLIT 815 Solid Face with Guide Ring Holes for Straight Running Chains 820 Grooved Face for Straight Running Chain PAT.
More informationIndex SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
More informationDOUBLE HINGE MAX-LINE. page 12 SINGLE HINGE WITH THICK TOP PLATE. page 29 STEEL DOUBLE HINGE MAX-LINE. page 22 HEAVY DUTY. page 48 PLASTIC TOP PLATE
overview REXNoRD le Steel SINGLE HINGE SINGLE HINGE DOUBLE HINGE HEAVY DUTY SINGLE HINGE page 10 page 10, 11 page 12 page 12 page 13 S T R A I G H T Plastic Rubber Top lbp case conveyor SINGLE HINGE page
More informationButterfly Valves. Quality Valves at Low Cost
utterfly Valves Quality Valves at ow Cost bout Us The Flow+ product le is built around the goal of providg quality valves at competitive prices. It s a goal that has met the needs of various oil and gas,
More informationComplementary accessories
Complementary accessories - SPROCKETS - SHFTS - RETINER RINGS - MOTORDRIVES - STTIC NOSEBR - ROLLERS FOR FLEX ONE EWC - ROUND BR - FILL IN THE TECHNICL FORM C.002 C.004 C.005 C.007 C.008 C.008 C.009 C.010
More informationIndustrial Chain and Conveying
Industrial Chain List Price Book Industrial Chain and Conveying Chain, Idlers, Engineered Chain, Conveying Equipment 102-606 October 1, 2017 Supersedes January 1, 2017 TABLE OF CONTENTS Chain Lengths and
More informationMotorized Pulley 500L, 500M & 500H, Ø in. (501 mm)
Motorized Pulley 500L, 500M & 500H, Ø 19.72. (501 mm) Our 19.72 diameter Motorized Pulley range offers three different performance levels for BULK applications: - L for Light duty - M for Medium duty -
More informationTorque Limiter T-Series Overview. Autogard Torque Limiter T-Series
Torque imiter T-Series Overview Autogard Torque imiter T-Series Torque imiter T-Series For more than 80 years, Autogard products have led the dustry overload protection with high-quality products, design
More informationSideGrip Chain. Maintenance Manual
SideGrip Chain Maintenance Manual Rexnord, Rex, TableTop, MatTop, Platinum Series, PS, and HP are trademarks of Rexnord Industries, Inc. All rights reserved. Nylatron is a registered trademark of Quadrant
More informationSuper-Shield Parts List & Pricing. Date: 06/01/12
Super-Shield Parts List & Pricing Date: 06/01/12 To Order Call: 519-227-4323 PAGE 2 Friction Super-Shield Flat Style Friction Super-Shield Friction Drive G 60 Flat Style Track. Complete with Torsion Mount
More informationMotorized Pulley 500L, 500M & 500H, Ø in. (501 mm)
Motorized Pulley 500L, 500M & 500H, Ø 19.72. (501 mm) Our 19.72 diameter Motorized Pulley range offers three different performance levels for BULK applications: - L for Light duty - M for Medium duty -
More informationCONVEYOR COMPONENTS CONVEYORS. All Belts are available in a variety of pitches and materials. FREEFAX:
Freephone lines are open between 8.00am and 5.pm 0800 80 CONVEYOR COMPONENTS Moody have been appointed as a unichain distributor, and are able to offer the full range of unichain products. Chains are available
More information1625B-TAB Conveyor Design Manual. 1625B-TAB Series MatTop Chain
1625B-TAB Conveyor Design Manual 1625B-TAB Series MatTop Chain Contents Safety Considerations/Introduction... 2 Chain Selection... 4 Carry Section Wearstrips... 8 Return Section Wearstrips... 11 Drive
More informationP (Nominal) L T POM-DI UV/PBT-GR PP UV/PBT-GR POM-DI UV/PBT-GR PP UV/PBT-GR. mm in N lbf N lbf kg/m lb/ft kg/m lb/ft
Datasheet: uni C Rough Embedded lastic Modular elt Series uni C Rough Embedded elt material & color in and lock T-GR N OM-DI UV O UV W Non standard material and color: See uni Material and Color Overview.
More informationTableTop and MatTop Products
FlatTop Catalog Download the most up-to-date version at www.rexnord.com TableTop and MatTop Products Issue 15 Rexnord TableTop Chains Rexnord MatTop Chains Rexnord FlatTop conveyor chains and components
More informationRaised Face. Groove/Ring Number. Face Diameter min in mm
http://www.yaang.com e-mail: sales@yaang.com BS 393 : 1960 British Standard BS 393 : 1960 - Carbon Steel Pipe s (over 4 ches nomal size) for the Petroleum Industry, covers 1 lb to 600 lb weld neck and
More informationuni-chains Conveyor Chains
s Conveyor Chains uarantee s guarantees for one year against defects caused by faults in design, production or material. 2002, s A/S. Copying or reproduction of this catalogue is prohibited without written
More informationPRODUCT CATALOGUE 2008/2009 REXNORD / MCC FLATTOP EUROPE PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS
PRODUCT CATALOGUE 2008/2009 REXNORD / MCC TABLETOP AND MATTOP CHAINS 799.02.99 WORLDWIDE CUSTOMER SERVICE AUSTRALIA Rexnord Australia Pty. Ltd. Picton, New South Wales Phone: 61-2-4677-3811 Fax: 61-2-4677-3812
More informationMATERIAL HANDLING SYSTEMS
MATERIAL HANDLING SYSTEMS Transport Systems MODULAR BELTS We specialized in custom design and development of high performance plastic components for material handling systems. SERIES PLA_00 SERIES PLA_030
More informationCatalog PAN2-2. Pancake. II Air Cylinders. Superior Interchangeable Industrial Air Cylinders
Catalog PN2-2 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD How it works....................................
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com ontent uni M-SN M2 14% page 3-4 uni M-SN M3 14% page 5-6 Datasheet: uni M-SN M2 14% EN lastic Modular
More informationPlastic Modular Belt. uni Flex SNB. Pitch 25.4 mm/1.00 in side flexing. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationCONVEYOR INSTALLATION MANUAL I VERSION 1. Rexnord TableTop and MatTop Chains. Rexnord Roller Upgrade System REXNORD FLATTOP
CONVEYOR INSTALLATION MANUAL I VERSION 1 Rexnord TableTop and MatTop Chains Rexnord Roller Upgrade System REXNORD FLATTOP Rexnord Industries, LLC For more than one hundred years, Rexnord has provided superior
More informationRexnord TableTop Chains
Rexnord TableTop chains are engineered to satisfy a wide range of conveyor applications for virtually any industry. large selection of straight running and side-flexing chains are designed to convey flawlessly
More informationCHICAGO HARDWARE & FIXTURE COMPANY
CHICAGO HARDWARE & FIXTURE COMPANY Manufacturers of Wire Rope and Cha Fittgs, Industrial and Mare Hardware and Allied Products Sales offices and warehouse stocks are mataed the prcipal cities to enable
More informationForged Chains & Sprockets
Forged Chains & Sprockets Forged Link Standard Series MN Grade Standard in stock MINIMUM ULTIMATE STRENGTH LB CHAIN No. PITCH T C S F R OD MN CN C CD S 420 JKF102Z 4 (102) 0.94 1.42 0.31 0.39 0.25 0.56
More informationCHAINS & BELTS PRODUCTION PROGRAM
CHAINS & BELTS PODUCTION POGAM STAIGHT BELTS SIDEFLEXING BELTS SIDEFLEXING CHAINBELTS 2 INCH PITCH ½ INCH PITCH 1 ¼ INCH PITCH 1 INCH PITCH Imperial width Metric width Metric width Metric width Metric
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationTURNING DISK STEEL CHAINS:
TURNING DISK STEEL CHAINS: Series 878TAB 324 327 MULTIFLEX CHAINS 328 331 878 TAB DRIVE AND IDLER DISK for sideflexing chains TANGENTIAL SPROCKETS Plain bore Ø 18.. 4 1 Ø18 Z B C M R 12817 32 337 32 29
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationuni Light EP (Nominal) L POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni Light E 8.5% lastic Modular Belt Serie uni Light E 8.5% Belt material & color in and lock material & color OM-D W Non standard material and color: See uni Material and Color Overview. Belt
More informationPlastic Modular Belt. uni Flex SNB PITCH 25.4 MM/1.00 IN SIDE FLEXING. Series
lastic Modular Belt Series uni Flex SNB uni Flex SNB C 1.6 uni Flex SNB C 2.3 uni Flex SNB W 2.3 Surface Opening: 55% Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type: Flat Surface opening:
More informationEngineering Class Sprockets
Engineering Class Sprockets 28 Engineering Class Sprockets Renold Jeffrey replaceable sprockets and traction wheels are specially designed for the realities of high-stress, heavy-duty service. A variety
More informationAmmeraal Beltech Modular
eraal eltech Modular Innovative belt and cha solutions for every dustry & application www.unichas.com Content uni Flex L-S 47% Open Radius 1.6 page 3-6 uni Flex L-S 47% Open Radius 2,2 page 7-10 uni Flex
More informationBore (B) Pitch Diam. Drilling Template Flanges (1) Diam of Diam of. Groove. Neck D X G A Raised Face Raised Face P Raised face
Class 300 Orifice s Pipe size Thickness of Depth of jack Jack screw s (1) screw slot size & of and raised face Hub Bevel threaded Length of of Stud stud bolts Face face face bolt circle Bolts Bolts Bolt
More informationCatalog PAN2-2. II Air Cylinders. Pancake. Superior Interchangeable Industrial Air Cylinders
Catalog PN- Prices effective September 1, 011 Pancake II ir Cylinders Superior Interchangeable Industrial ir Cylinders 5-8-10 Pancake II Cylinders Product Index Standard Series PSD, PSR, PSX, PWD, PTD
More informationROLLER CHAIN SPROCKETS INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN SPROCKETS PRODUCT PAGE INDEX...E-1 E-2 MADE-TO-ORDER CAPABILITIES...E-3 SECTION I STANDARD SPROCKETS...E-4 E-112 Shear Pin Sprockets, Bolt-On...E-4 E-6 Type D Sprockets, Detachable
More informationIn addition to the SPEC products described in this catalog,
In addition to the SPEC products described this catalog, Associated Sprg Raymond a worldwide leader the design, manufacture and sale of sprgs also offers a full le of struts, hardware, tool & die components:
More informationAmmeraal Beltech Modular
mmeraal eltech Modular Innovative belt and chain solutions for every industry & application www.unichains.com ontent uni QN page 3-6 uni QN Rough page 7-0 uni QN all page - Datasheet: uni QN EN Plastic
More informationFlatTop 7956 MatTop Chains Brochure. Rexnord 7956 Side-Flex MatTop Chains
FlatTop 7956 MatTop Chains Brochure Rexnord 7956 Side-Flex MatTop Chains Rexnord 7956 Side-Flex MatTop Chains. Strong in Curves. Durable and Efficient. Rexnord is pleased to announce the introduction of
More informationuni Flex SNB Sideflexing
uni Flex S 132 Pitch 25.4 (1.00 ) uni Flex S strong and tight radius sideflexing belt uni Flex S 1 pitch is created to optimize throughput in high volume operations with space limitations. The belt has
More informationForged Chains & Sprockets
Forged Chains & Sprockets Telephone: 309-698-9250 5 a CROMANT chain company FORGED CHAINS & SPROCKETS Cobalt Chains forged alloy fork link chain provides an excellent solution for the rigors of heavy duty
More informationSeries SK Straight running plastic chains
Series 80-83 - SK 38-8 - 857 Straight running plastic chains 80 STRAIGHT RUI CHAIS RD=50 38. 38. 7..5 3.5 9.5 Ø 6.35. STRAIGHT RUI CHAIS Series 80 Applications: Food and beverage industry: Conveying lines
More informationsiegling prolink modular belts Siegling total belting solutions
siegling prolink modular belts Product range Siegling total belting solutions Traditional conveyor belts are often intended for generic use, but the design features of Siegling Prolink modular belts are
More informationCombine Pickup Heads
Combine Pickup Heads 164 Model Section 3 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
More informationEB Series Electro Brake
Shaft Mounted Brakes for Power-On pplications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
More informationMAIN PRICE LIST. - B 487 Perforated Strip 2 1/2" B 488 Perforated Strip 3 1/2" B 482 Perforated Strip 4 1/2" 9 1.
PERFORATED STRIPS LENGTH HOLES GBP 1 Perforated Strip 12 1/2" 25 1.63 1 a Perforated Strip 9 1/2" 19 1.51 1 b Perforated Strip 7 1/2" 15 1.39 2 Perforated Strip 5 1/2" 11 0.90 2 a Perforated Strip 4 1/2"
More informationVISCOSITY RANGE GPM m 3 h PSI Bar F C SSU cst
SERIES 493, 493 Section 34 Page 34. TBLE OF CONTENTS Features & Benefits...2 Specifications...2 Standard Materials of Construction...2 Key...3 Cutaway View & Pump Features...3 Mountg Options...4 Dimensions
More informationCombine Pickup Heads
Combine Pickup Heads 124 Model Section 1 Model Years 1991 1996... 2-5 Pickup Head Layout 1994 1996... 6-7 Model Years 1997 1999 (1 PUH Bearings)... 8-10 4 Tube Pickup Head Layout 1997 1999... 11-12 Model
More informationFOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
More informationEC / EB Series Electro Clutches and Brakes
EC / EB Series Electro Clutches and Brakes Shaft Mounted Clutches and Brakes Shaft Mounted Clutches EC Series All the features of an electric clutch in a convenient, preassembled package. Mounts on any
More informationROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...E-3
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable Hubs Split
More informationDrop Forged Chain For Conveyors & Elevators
Drop Forged Chain For Conveyors & Elevators Quality Components for Chain Conveyors & Elevators Introduction Members of the Schenck Process Group, Stock Redler Ltd are leading providers of feeding, automation
More informationBringing Component Parts Together
Bringing Component Parts Together About Concentric International Concentric International connects retail, wholesale and original equipment manufacturers (OEM) with the value of global sourcing for products
More informationSPROCKET ENGINEERING DATA
Engineering SPROCKET ENGINEERING DATA ROLLER CHAIN DIMENSIONS SPROCKET TOOTH DIMENSIONS MAXIMUM HUB RECOMMENDATIONS APPLICATION AND SELECTION HARDENING CHAIN LENGTH CALCULATION SPEED RATIOS SPROCKET DIAMETERS
More informationEB Series Electro Brake
Shaft Mounted Brakes for Power-On Applications Pre-engineered, pre-packaged brakes mount on motor or thru shafts. They have been designed to mate easily with industry standard motors, reducers and other
More informationSERIES GRK PARALLEL GRIPPERS
GRK SERIES GRK PARALLEL GRIPPERS Ideal for Assembly and Robotics Highest Grip Force Its Class Precision Jaw Movement High Moments Highest Grip Force to Height Ratio Precision Jaw Movement Wear Compensatg
More informationSPROCKETS for belts series
eite 1 von 7 PROKET for belts series PLIT PROKET INGLE KEYWAY Material: polyamide, screws in stainless steel. DIN 6885 key seat. Reduced noise level and quiet operation ompletely closed structure, easier
More informationPLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
More informationT L. (Nominal) L R POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR POM-LF/PA6.6 PP/PA6.6 PA6/PBT-GR
lastic Modular elt Series uni ight Rib elt material & color in material & color Running direction OM- 6.6 on standard material and color: See uni Material and Color Overview. elt width ermissible tensile
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationTitan Flow Control, Inc. Your pipeline to the future!
Titan Flow ontrol, Inc. Your pipele to the future! Series F 75 Wafer > ast Iron Series F 76 ug > uctile Iron esigned accordance with: MSS-S-67 & I 609 olor oded: Orange ody is M Seat lue ody is una-n Seat
More informationCan-Am. Mill Chain Sprockets. Can-Am Products visit us at
Can-Am Mill Chain Sprockets Can-Am Products visit us at www.can-amchains.com CAN-AM CHAINS CANADA CAN-AM CHAINS USA The origin of CAN-AM chain dates back to 1966, and a small machine shop in Richmond,
More informationOne Step Rod Cutter Rear Pull
One Step Rod Cutter Rear Pull Drivelines Section 13 Model Years 1988 1991 (Secondary Driveline) 1 Solid Shaft... 2-5 Model Years 1988 1992 (Primary Driveline) G & G... 6-11 Model Year 1992 (Secondary Driveline)
More informationHabaCHAIN Slat and Conveyor Chains
Products Media No. 4185 Slat and Conveyor Chains Habasit Solutions in motion Product liability, application considerations If the proper selection and application of Habasit products are NOT recommended
More information6990 Series Hybrid MatTop Chain Product Brochure. Rexnord 6990 Series Hybrid MatTop Chain
6990 Series Hybrid MatTop Chain Product Brochure Rexnord 6990 Series Hybrid MatTop Chain Breakthrough Automotive Solution Count on Rexnord 6990 Series Hybrid MatTop Chain to support you in your automotive
More informationT Z Y. 43% Open Tab Radius 2.2 X Z Y. mm in mm in mm in mm in
Datasheet: uni Flex AS lastic Modular elt Series uni Flex AS 43% Open Radius 1.6 43% Open Radius 2.2 43% Open Curved Surface Radius 2.2 V Sideflexing belt Nominal pitch: 25.4 mm (1.00 in) Surface type:
More informationConveyor chain catalogue
Conveyor chain catalogue www.renold.com Table of Contents Section - Conveyor Products and Dimensions Conveyor chain introduction....................................................................5-7 BS
More informationTorque Limiter Design Features
In response to industry needs, Morse introduced the first spring loaded, friction type protective device in 1949, called the Morse torque limiter. s the originator of the torque limiter, Morse has gained
More informationFBN/FBK Chain Couplings
s FBN/FBK Order Example FBN 4012 D20 FBK 4012 D20 (for New JIS Key) (for Old JIS Key) Semi-F supported FBN5014D20 (inner diameter D20) FBN5014D30 (inner diameter D30) Type Model Shaft Hole Diameter Conveyor
More informationBottom view. (Nominal) L Pin: PP W PE W SS304 and SS316 POM-D/PA6.6 PP/PA6.6 PE/PA6.6 POM-D/PA6.6 PP/PA6.6 PE/PA6.6
Datasheet: uni O 4V C lastic Modular elt Series uni O 4V C Recommended belt material & color * OM-D Recommended pin and lock material & color Non standard material and color: See uni Material and Color
More information50 years of Reliable Field History
Coupling Comments The No Maintenance, Easy Assembly, Resilient Coupling with High Angular Misalignment up to 10 degrees Center Assembly 70 Deg. Neoprene Rubber in Compression Grade 5 Bolts Steel Flanges
More informationSPROCKET ENGINEERING DATA
Engineering SPROCKET ENGINEERING DATA ROLLER CHAIN DIMENSIONS SPROCKET TOOTH DIMENSIONS MAXIMUM HUB RECOMMENDATIONS APPLICATION AND SELECTION HARDENING CHAIN LENGTH CALCULATION SPEED RATIOS SPROCKET DIAMETERS
More informationBenefits and Selection Table
105 Benefits and Selection Table D-M-E s Internal Latch Lock Allows Precision Control of Mold Plate Latchg Operation D-M-E s unique ternally-mounted latch lock mechanism adapts a number of mold base sizes
More informationDRIVE CHAINS ENGINEERED STEEL DRIVE CHAINS DRIVE CHAINS
ENGINEERED STEEL Designed to give you superior performance, even under the most punishing conditions Rugged, all-steel Rex and Link-Belt drive chains are built to perform at levels other drive chains can
More informationWood s Sure-Grip Pulleys
Wood s SureGrip Pulleys B5 Statically Balanced Up to 65 feet per minute rim speed Dynamic balance based on rim speed and face width P1686TBW 11/15... TB Wood s 888896637 B51 SureGrip Pulleys Dimensions
More informationDisc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
More informationPlanetary Servo Reducers
VRAL Series ABLE Planetary Servo Reducers Industry Standard Mountg Dimensions Best-In-Class Standard Backlash ( 5 arc-m) 20,000 Hour Service Life Available Selection Guides Match Reducers to Motors In
More informationExtra Heavy Duty modular belts 2508 & 2630 Series
Extra Heavy Duty modular belts 2508 & 2630 Series EMERSON. E CONSIDER IT SOLVED. APPLICATIONS Pictures by courtesy of Hohmeier Anlagenbau GmbH and Audi AG Ingolstadt - Germany 2508 HEAVY DUTY BELTS PATENT
More informationTitan Flow Control, Inc. Your pipeline to the future!
TITN Titan Flow ontrol, Inc. Your pipele to the future! eries F 75 Wafer > ast Iron eries F 76 ug > uctile Iron esigned accordance with: M--67 & I 609 olor oded: Orange ody is M eat lue ody is una-n eat
More informationNEW. PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain
NEW PLASTIC MODULAR CHAIN WT0705-W Plastic Top Chain A new 7.5 mm-pitch chain has been added to our lineup of plastic modular chains. Features of WT0705-W Plastic Modular Chain Knife-edge conveyor applications
More informationSPECIALTY PRODUCTS INDEX... A-1 MTO SPECIALTY PRODUCTS... A-2. Bronze Bushed... A-3. Ball Bearing... A-4. Ball Bearing - Non-Metallic...
Index SECTION A SPECIALTY SPECIALTY PRODUCTS PRODUCT PAGE INDEX................................................................................... A-1 MTO SPECIALTY PRODUCTS................................................................
More informationChain Box and Knife. Item # Description Part Number 180-D & GS
Chain Box and Knife Item # Description Part Number 180-D & GS 1 Groove pin 2275-03160 2 Hex cap screw 2175-03061 3 Washer 2275-03060 4 Setscrew 2175-07163 5 Chain box 4975-00355 6 Berkel logo 3175-00152
More informationLUBE FITTINGS Cover halves have 3/8 NPT Iube holes. Use a standard grease gun and Iube fitting as instructed on Page 4.
Falk Steelflex Couplings Installation & Maintenance Type T10 Sizes 1150 1260 & 150 260 (Page 1 of 6) How To Use This Manual This manual provides detailed instructions on maintenance, lubrication, installation,
More informationPULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS
PULLEY DIVISION MANUFACTURERS OF HIGH QUALITY PULLEYS AND SPROCKETS PAGE 2 Table of Contents: Drive and Bore Adaptors..3 Clevis Adaptors.4 Shoulder Adaptors.5 Flat Idler Pulleys..6 Flat Idler Pulleys Continued
More information