Aftermarket Tractor,Skidsteer & Wheel Loader Attachments

Transcription

1 Q. # (yped esponses equired) ecember 2017 rice quote for: ftermarket ractor,kidsteer & heel oader ttachments Vendor ame: ontact erson: treet ddress:.. ox: ity, tate, Zip hone #: oll Free #: Fax #: mail ddress: ano quipment noka cott Fahey 6140 wy 10 noka, anufacturer's ame ttachment escription arranty erm (months, years) ercent iscount (%) to be applied to rice ist ate &.. of rice ist (,, FF, Y, F,, ) V,, V, 21% 2018 F 2.0 elivery harges (ee pecial erms and onditions) VY (ity) (tate, Zip ode) F rice per loaded mile $ rice for additional ervice anual rice for additional arts anual 4.0 nstallation ervices: er our (hop abor ate) $109 nstallation services may be requested on an "as needed" basis. (ee pecial erms and onditions)

2 F V & : F F, ** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation. ** F Vendor umbers: rovide the wift Vendor umber (F ) and ocation ode ( ) for each uthorized istributor. ach uthorized istributor must have an accurate F. ** : ll distributors provide the required insurance certificates to the tate as outline in the wift vent pecial erms and onditinos before any tate ontract may be executed. Y F Y /Z ano quipment noka wy 10 noka, cott Fahey

3 F: FFV JY 1, F

4 F lick on name of item to go to that page con ey...14 ow to rder an ttachment...15 age 5nchor eneral elling erms & onditions for irect urchase...16 ancellation olicy...16 imited arranty olicy...17 arranty laim rocedures...18 aterial and abor eimbursement...19 arranty rocedures...20 rder Form...26 ftermarket ales rogram...27 F nventory Finance, nc. (FF) Floor lan Financing...28 dapters...29 dapter lates for kid-teer oaders...30 rop eight dapter...30 ilt ttach...30 niversal ount to ategory or 3-oint itch...30 niversal eld-n...30 dapter lates for ompact ractors...31 ompact ractor dapter...31 ategory, 3-point to niversal kid-teer itch...31 niversal eld-n...31 dapter lates for elehandlers...32 lank dapter late...32 niversal dapter to itches...32 dapter lates for ractor oaders/ackhoes...32 lank dapter late...32 dapter lates for ractor oader/ackhoes...33 niversal dapter to itches...33 dapter lates for tility ractors...33 niversal ount to ategory or 3-oint itch...33 dapter lates for heel oaders...33 lank dapter late...33 niversal dapter to itches...33 ugers...35 omplete lanetary rive ssemblies For kid-teer oaders...37 uger rives...38 X eries lanetary uger rives...38 kid-teer oaders...38 ompact ractors...39 xcavators...39 ractor oaders/ackhoes peed lanetary uger rives...40 kid-teer oaders...40 ompact ractors...40 ote: ll manufacturer s names, symbols, numbers and descriptions are used for reference purposes only and does not mean that any part is the product of these manufacturers or approved by these manufacturers. 5

5 F lick on name of item to go to that page ugers cont. igh orque uger rives...41 kid-teer oaders...41 xcavators...42 ractor oaders/ackhoes...42 hift on emand igh orque 2-speed uger rives for xcavators...42 eries irect rive for ompact ractors...43 uger ounts...43 uger ounting its and omponents...44 radles...44 ounting rackets for kid-teer oaders...44 edicated ounts for radco ackhoes...44 ounting rackets for xcavators...45 eavy uty ountings for arge xcavators...48 ounting rackets for Front nd oaders...48 ounting rackets For ini-xcavator and mall ackhoes...49 ounting rackets for elehandlers...49 ounting rackets for ractors...50 ounting rackets for ractors with oaders...50 ounting rackets for ractor oaders/ackhoes...51 eavy uty ountings for ractor oaders/ackhoes...52 ounting rackets for heel oaders...53 ydraulic its and ouplers...53 ydraulic its for kid-teer oaders...53 kid-teer oader niversal ydraulic Quick ouplers...53 ouplers For kid-teer ounted igh orque rives...53 ase rain ouplers...54 igh Flow ouplers...54 uger its...54 tyle ugers (Formerly )...54 F tyle ugers...59 F tyle ugers...63 tyle ugers (Formerly )...64 ock ugers...66 ear omponents...67 tandard ear omponents for uger its...67 ptional ear omponents / uger ollars for gricultural, F,, F tyle ugers...68 dapters...69 uger xtensions...70 Fixed ength xtensions...70 Variable ength xtensions...71 Flighted ody xtensions...72 ntro6 nchor ackhoes...73 Fit p harts...76 odel 365 (3- or 4-oint itch)...80 odel 365 ackhoe...81 uckets for odel 365 ackhoe...81 ompact ool arrier/ini ounting its...81 ompact ractor ounting its...81 ptions for odel 365 ackhoe...81 odel uckets for odel 490 ackhoe...83 ompact ractor ounting its...83 ptions for odel 490 ackhoe...83 ote: ll manufacturer s names, symbols, numbers and descriptions are used for reference purposes only and does not mean that any part is the product of these manufacturers or approved by these manufacturers. 6 rices subject to change without notice. ll prices are in dollars.

6 F lick on name of item to go to that page ntro7 anchor ackhoes cont. 500/600 eries /600 eries ackhoe...85 uckets for 500/600 eries ackhoe...85 tabilizer pads for 500/600 eries ackhoe...85 ounting and ydraulic its...85 ptions eries (3- or 4-oint itch) eries ackhoe...88 uckets for 3000 eries ackhoe...88 tabilizer ads for 3000 eries ackhoe...88 ounting its...88 ptions...88 ackhoe ounts and ydraulic its...89 kid-teer oaders ounts and ydraulic its...89 ase...91 aterpillar...92 aewoo...93 ehl...93 yundai...95 John eere...95 ubota...96 ew olland...96 akeuchi...97 Volvo...97 ompact heel oaders and ydraulic its...98 ubota...98 ractor ounts and ydraulic its...98 ase...98 aterpillar...98 John eere...99 ubota assey-ferguson ew olland akeuchi ale/ay andling ttachments ale/ay rapple ucket for ompact ractors and heel oaders ale/ay rapple ucket - eavy-uty elehandlers ractor oaders/ackhoes heel oaders ale arriage - ual arge quare elehandlers ractor oaders/ackhoes heel oaders ale Fork - 8 mall ales uro/lobal ounts elehandlers ractor oaders/ackhoes heel oaders ale rab - arge for elehandlers ale ugger kid-teer oaders ompact ractors ote: ll manufacturer s names, symbols, numbers and descriptions are used for reference purposes only and does not mean that any part is the product of these manufacturers or approved by these manufacturers. 7

7 F lick on name of item to go to that page ale/ay andling ttachments cont. ale ugger - arge ound uro/lobal ounts elehandlers ale pear - ross olt esign for ompact ractors ale pike - arge quare ale pike - arge quare for elehandlers and ractor oader/ ackhoe ale pike - arge quare for heel oaders ale queeze ide ale queeze ide for elehandlers ooms ooms - oader for kid-teer oaders and ompact ractors ooms - ree (ifting rms) elehandlers heel oaders ooms - russ for elehandlers ooms - russ (djustable) ractor oaders/ackhoes heel oaders ooms - russ with Quick ttach elehandlers ractor oaders/ackhoes ooms - russ with ydraulic inch elehandlers heel oaders ox crapers for ompact ractor oaders trikeforce reakers ompact reakers eneral urpose reakers edium uty reakers eavy uty reakers ool its late ompactors rush utters round hark xtreme uty round hark tandard uty uarding ackages ubota Forestry ase uckets in-1 onstruction uckets in-1 eavy-uty onstruction uckets ackhoe loaders elehandlers oaders in-1 ulti-urpose uckets kid-teer oaders ote: ll manufacturer s names, symbols, numbers and descriptions are used for reference purposes only and does not mean that any part is the product of these manufacturers or approved by these manufacturers. 8 rices subject to change without notice. ll prices are in dollars.

8 ntro10 F lick on name of item to go to that page uckets cont. 4-in-1 onstruction uckets - for ubota kid-teer loaders ompact ractors elehandlers ractor oaders/ackhoes heel oaders ucket ccessories and dd-ons kid-teer oaders Fork ocket ucket ractor oaders/ackhoes and heel oaders eavy-uty onstruction/ndustrial uckets elehandlers ractor loaders/backhoes heel loaders eavy-uty eneral urpose uckets elehandlers eavy-uty aterial ucket for kid-teer oaders eavy-uty oader ractor ucket for oader ractor igh-apacity eavy-uty ucket kid-teer oaders irt-eady for kid-teer oaders igh-apacity ight aterial ucket for kid-teer oaders igh-ump ucket for kid-teer oaders arge Frame kid-teer ucket for kid-teer oaders ight uty ow rofile ucket ight uty g ow rofile uckets for kid-teer oaders ight aterial oader uckets - ubota ight aterial oader uckets for ubota kid-teer oaders ow-rofile ong Floor ucket ow-rofile ong Floor uckets for kid-teer oaders irt-eady for kid-teer oaders ow-rofile tandard Floor ucket kid-teer oaders irt eady kid-teer oaders ucket ccessories for radco ow-rofile, igh apacity uckets ock ucket kid-teer oaders uro/lobal ounts ompact ractors elehandlers o ount olt-n ounts ide ischarge ucket for kid-teer oaders uckets - oothbars xtra eavy-uty oothbars eavy-uty oothbars tandard uty oothbars oothbar Fitting heet old laners old laner for kid-teer oaders old laner eries for kid-teer oaders oncrete ools oncrete huter for kid-teer oaders oncrete law for kid-teer oaders ote: ll manufacturer s names, symbols, numbers and descriptions are used for reference purposes only and does not mean that any part is the product of these manufacturers or approved by these manufacturers. 9

9 F lick on name of item to go to that page ntro11 ouplers...19 oweratch ydraulic ini ouplers ackhoe oaders ini xcavators J anual ini xcavator/ackhoe oader ouplers ackhoe oaders ini xcavators oupler - ool arrier, Q anual for ractor oaders/ackhoes ozer lade for kid-teer oaders Flail owers for xcavators Forks & arriages ar Fork arriages for elehandlers, ractor oaders/ackhoes and heel oaders allet Fork Frame - lass kid-teer oaders ompact ractors uro/lobal ounts ractor oaders allet ail tyle Fork lass ailstyle allet for heel oaders and ackhoe oaders Floating in arriages elehandlers ractor oaders/ackhoes heel oaders old own ogging arriage, ual for elehandlers allet Fork Frame - haft for ompact ractors Fork ositioners - ide hift elehandlers ractor oaders/ackhoes heel oaders Fork ositioners - ide ilt with Floating in elehandlers ractor oaders/ackhoes heel oaders wing arriage for elehandlers Fork positioners with Forks elehandlers ractor oaders/ackhoes heel oaders Forks - lock ines elehandlers ractor oaders/ackhoes and heel oaders Forks - Floating in elehandlers ractor oader/ackhoes heel oaders ook n Forks ractor oaders/ackhoes ines for elehandlers, ractor oaders/ackhoes and heel oaders rabbing ool JZ rabbing ool for kid-teer oaders and ompact ractors ote: ll manufacturer s names, symbols, numbers and descriptions are used for reference purposes only and does not mean that any part is the product of these manufacturers or approved by these manufacturers rices subject to change without notice. ll prices are in dollars.

10 ntro12 F lick on name of item to go to that page rapples onstruction rapples onstruction rush rapples (ual ylinder) for kid-teer oaders onstruction crap rapples (ual ylinder) for kid-teer oaders odel 120 onstruction rapple (ual ylinder) for kid-teer oaders ardscape rapple for kid-teer oaders eavy-uty rush rapple (ual ylinder) for elehandlers, ractor oaders/ackhoes and heel oaders eavy-uty crap rapple (ual ylinder) elehandlers ractor oaders/ackhoes heel oaders odel 130 eavy-uty crap rapple ucket for elehandlers, ractor oaders/ackhoes, heel oaders og rapple for kid-teer oaders Quik ik ulti-urpose rapple for kid-teer oaders crap rapple ucket for ompact ractors keleton Fork & rab elehandlers heel oaders rash lamp elehandlers heel oaders tility rush rapple (ingle ylinder) for ompact ractors tility rush rapple (ual ylinder) for kid-teer oaders tility crap rapple (ual ylinder) for kid-teer oaders ite reparation and culptor for kid-teer oaders ooks Fork ounted rane ook for elehandlers and ractor oaders/ackhoes ifting ook for elehandlers ydraulics uxiliary ydraulic onversion it for ompact ractors anure ools anure Fork and rab ompact ractors kid-teer oaders uro/lobal ounts elehandlers ractor oaders/ackhoes anure ush for ompact ractors ote: ll manufacturer s names, symbols, numbers and descriptions are used for reference purposes only and does not mean that any part is the product of these manufacturers or approved by these manufacturers. 11

11 F lick on name of item to go to that page ntro e ulchers ulchers, eries kid-teer oaders uarding ackages ase Forestry uarding ackages xcavators ost rivers for kid-teer oaders reparator for kid-teer oaders akes utoake for kid-teer oaders rader ake for kid-teer oaders ower ox ake kid-teer oaders ractors - 3 oint alk ehind ower ox ake - irect rive for kid-teer oaders oot ake kid-teer oaders ompact ractors ompact heel oaders uro/lobal ounts ractor oaders/ackhoes ock aw for kid-teer oaders oller eveler for kid-teer oaders carifier for kid-teer oaders ote: ll manufacturer s names, symbols, numbers and descriptions are used for reference purposes only and does not mean that any part is the product of these manufacturers or approved by these manufacturers rices subject to change without notice. ll prices are in dollars.

12 ntro14 F lick on name of item to go to that page ilage efacer kid-teer oaders uro-lobal ounts elehandlers kid oe/wing oe for kid-teer oaders now emoval now lades eries now lades for kid-teer oaders eries now lades For kid-teer oaders and ractor oaders/ackhoes eries now lades for kid-teer oaders eries now lades for kid-teer oaders and ractor oaders/ackhoes now lowers for kid-teer oaders now uckets for kid-teer oaders now ush eries now ush (4 ft x 4 ft) kid-teer oaders, ractor oaders/ackhoes, tility ractors and heel oaders eries now ush - ow rofile kid-teer oaders eries now ush (3 ft x 3 ft) kid-teer oaders, ractor oaders/ackhoes, tility ractors and heel oaders ompact ractor now ush ompact ractor rip dge now ush eries V lade eries V lade For kid-teer oaders and ompact heel oaders tump rinder for kid-teer oaders weepers ommercial urf ower ngle weeper - ydraulic rive () ommercial urf ower ngle weeper - echanical rive () ompact ractor oader ngle weeper - ydraulic rive () ompact ractor ngle weeper - ydraulic rive () ompact ractor ngle weeper- echanical rive () tility ractor igh aise ngle weeper- ydraulic rive () tility ractor ear ount ngle weeper - echanical 3-oint rive (F) tility ractor ear ount ngle weeper - ydraulic rive () ngle weeper-ydraulic rive (Q ngle) ruck and arge rticulated heel oader ngle weeper - ydraulic rive () igh peed ruck and heel oader ngle weeper - ydraulic rive () ruck and heel oader ngle weeper - ydraulic rive () tility ractor ngle weeper - to ydraulic rive (/) tility ractor oader ngle weeper ydraulic rive (Q) ollector weeper - ydraulic rive ( opper) ollector weeper - ydraulic rive eavy-uty ( opper) ollector weeper-ydraulic rive old laner pecial ( opper) ollector weeper - ydraulic rive (V) ollector weeper with aterless ust batement - ydraulic rive (V) tility ractor oader ollector weeper - ydraulic rive () tility ractor oader ollector weeper with aterless ust batement - ydraulic rive (V) ow ehind ngle weeper alk-ehind ngle weeper (24) ote: ll manufacturer s names, symbols, numbers and descriptions are used for reference purposes only and does not mean that any part is the product of these manufacturers or approved by these manufacturers. 13

13 F lick on name of item to go to that page ntro15 weepers cont. alk-ehind ngle weeper (36) eplacement rushes illers ree ools Forks coop hear pade renchers rencher odel rencher odel rencher odel rencher odel rencher hain election uide Vibratory low for ompact ractors Vibratory oller for kid-teer oaders Y g oader oader ractor ompact ractor kid-teer heel oader ote: ll manufacturer s names, symbols, numbers and descriptions are used for reference purposes only and does not mean that any part is the product of these manufacturers or approved by these manufacturers rices subject to change without notice. ll prices are in dollars.

14 ddendum Y V Y 3,000 * J J eries, 416 eries, 418 eries, 420, 422, and eries Y Q V, X- F Y :,, Z, F,, 4--1,,, V,,,,, F,, JZ, Q -, VY, VY,, F, ( J ) FF Y 25 Y 1,000 * J (, V ) X- V) J,, XV Y 2,000 * X 500 * J J J, V (X XV- ) 90 Y Z J 24 rices subject to change without notice. ll prices are in dollars.

15

16 F - lamps to existing skid-steer loader mounted attachments owers attachment by 2.38 se with track over tire machines or oversized tires () drop height adapter $ ttaches to skid-steer universal hitch to tilt 14 left and right ilts buckets and landscaping implements for precise grading and leveling renchers can be tilted to cut a vertical trench () tilt attach heavy-duty $3, hose kit for standard & heavy duty models $ / Y 94 hose kit for standard & heavy duty models $ equired to perate dditional ydraulic ttachments universal valve package $1, electrical control box electrical control box assembly is not required if kid- teer is equipped with auxiliary electrical outlet V Y 3- V - V Y $ ttaches to skid-steer universal hitch for using 3-point hitch attachments () adapter plate $ elds to your implement to convert it to a universal hitch V - () universal weld-on adapter $ heavy-duty universal weld-on adapter $ rices subject to change without notice. ll prices are in dollars.

17 F () attaches to tractor 3-point for using kid-teer universal attachments $1, attaches to skid-steer universal hitch for using 3-point hitch attachments $ Y, 3- V - V - ttaches to tractor 3-point for using skid-steer universal attachments Y, 3- V - () at & 2 to kid-teer adapter plate $1, elds to your implement to convert it to a universal hitch V - () universal weld-on adapter $ heavy-duty universal weld-on adapter $ / Y 31

18 F - () are ift Z $ ase 686 (re $ at / $ J 506/ $ J $ J 619 / 723 / 5-19 / $ J eries (with serial # < ) $1, J Q-fit $ J Q-fit (side plates only) $ ull 644 / 644 / 844 / $ ull 644 / $ anitou $ ew olland series with anitou hitch $ ew olland - Versattach $ ettibone $1, kyrak-j (with serial # > ) $ erex/enie Q $ V V () blank adapter (weld your own hitch) $2, at / $2, ngersoll-and V530 / V642 (post-2002) / V843 / 1044 / $2, J 506/508, erex, pright $2, J Q-fit $2, anitou/ew olland 5000 eries $2, ew olland-versattach $2, kyrak/ew olland 400/ase X eries $2, F / / Y - () at / $ J 210 / $ J Q-fit $ J Q-fit equipped 214/215/217 heavy duty $ rices subject to change without notice. ll prices are in dollars.

19 F Y V Y 3- V Y 3- F () adapter plate $ () at / $ J 406/Volvo 25 Z $ J 407/409 Z w/ Zettlemeyer Z $ J 411/416/426/436/ with coupler $1, John eere 244J/245/Volvo 30/35/Z $ omatsu 75/85/ $ acker $ V ttaches to skid-steer universal hitch for using 3-point hitch attachments V () blank adapter (weld your own hitch) $2, tlas / oyote $1, tlas / oyote 45, 65, 55, 75, $1, at / $2, John eere 304J - 244J Z $1, awasaki 45ZV $2, omatsu 65 Z $1, omatsu 75 / 85 / 95 (this is a bolt-on plate that locks into the universal female and converts the unit to the host machine - stays with each attachment) $1, omatsu 75 / 85 / 95 & Zettlemeyer Z $1, akeuchi $2, / $1, Volvo Z $1, Volvo Z402 (this is a bolt-on plate that locks into the universal female and converts the unit to the host machine - stays with each attachment) $1, acker $ / Y 33

20 / Y 34 rices subject to change without notice. ll prices are in dollars.

21

22 cillen uger rives by aladin, feature a wide variety of auger diameters, lengths and style for every digging application. omes with various mounts available for most applications. he 75 eries hydraulic motor drives the auger through a sealed planetary gear reduction 5 to 60 available xtensions available for deeper digging ugers available up to 48 diameter 2 speed auger drives available 1 to 2 year warranty, additional 1 year planetary warranty on select drives Fully welded flighting for added auger strength / Y F V hen selecting an auger drive you will need to match to the recommended and ressure specifications shown for the drive to your prime mover. hen deciding which model auger drive you need, please note the different model numbers for each drive. he larger model numbers will give you more torque and the smaller model numbers will give you more speed when operating within the recommended flow () range specified for each model. f you plan to dig holes in hard, compacted, or frozen soils, you should consider selecting a larger model as it will give you more torque. he same is true if you plan to use larger bits like the 36 versions. hey need more torque than the smaller bits. f speed and production are most important and you are using smaller bits, a smaller model drive will give you more speed than the larger models allowing you to dig faster rices subject to change without notice. ll prices are in dollars.

23 Y V F - omplete assembly includes: rive nit ounting racket with radle ose it : V (3500 X, 3000 ),, V F-F. Y Y. Y V F - () X round kid-teer assembly $2, X hex kid-teer assembly $2, X round kid-teer assembly $2, X hex kid-teer assembly $2, X round kid-teer assembly $2, X hex kid-teer assembly $2, X round kid-teer assembly $3, X hex kid-teer assembly $3, ounting bracket with cradle ose kit with universal flat face couplers / Y 37

24 V X Y V 75 eries drive units are completely sealed with all moving components running in oil for total lubrication on a constant basis he 75 eries hydraulic motor drives the auger through a sealed planetary gear reduction he heavy duty all gear design gives these units a long life with minimal maintenance and service costs ll models feature reverse rotation for quick backout when obstructions are encountered he systems hydraulic relief valve protects the units from damage when the auger hits large immovable objects utput peed X975 X1475 X1975 X2475 X3575 Flow peed peed peed peed peed utput peed X975 X1475 X1975 X2475 X3575 Flow peed peed peed peed peed utput orque X975 X1475 X1975 X2475 X3575 ressure orque orque orque orque orque lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft. X Y V F - : V Y. Y,, X Y. / Y X Y V (3500 maximum, 3000 continuous) () X round max dia 24 / hyd flow $1, X hex max dia 24 / hyd flow $1, X round max dia 30 / hyd flow $1, X hex max dia 30 / hyd flow $1, X round max dia 36 / hyd flow $2, X hex max dia 36 / hyd flow $2, X round max dia 36 / hyd flow $2, X hex max dia 36 / hyd flow $2, X hex max dia 48 / hyd flow $2, rices subject to change without notice. ll prices are in dollars.

25 V X Y V F : V Y. Y,, X Y. X Y V (3500 maximum, 3000 continuous) () X round max dia 24 / hyd flow $1, X hex max dia 24 / hyd flow $1, X round max dia 30 / hyd flow $1, X hex max dia 30 / hyd flow $1, X round max dia 36 / hyd flow $2, X hex max dia 36 / hyd flow $2, X round max dia 36 / hyd flow $2, X hex max dia 36 / hyd flow $2, X hex max dia 48 / hyd flow $2, X Y V : V Y. Y,, X Y. X Y V oses routed out the side () X round planetary drive $1, X hex planetary drive $1, X round planetary drive $1, X hex planetary drive $1, X round planetary drive $2, X hex planetary drive $2, X round planetary drive $2, X hex planetary drive $2, X Y V F / : V Y. Y,, X Y. X Y V oses routed out the side () X round planetary drive $1, X hex planetary drive $1, X round planetary drive $1, X hex planetary drive $1, X round planetary drive $2, X hex planetary drive $2, X round planetary drive $2, X hex planetary drive $2, / Y 39

26 V 2- Y V he 32-2 speed auger drive offers one drive for maximum productivity in changing soil and job site conditions. p to twice the productivity of single speed drives for less than 20% initial additional investment. esigned for digging fence posts fast - allows for quick clean out and on to the next hole. anual and electric shift available. utput peed Flow peed Flow peed utput orque ressure orque ressure orque igh peed ow orque ow peed igh orque igh peed ow orque ow peed igh orque lb. ft lb. ft lb. ft lb. ft. 2- Y V F - : V Y. Y,, X Y. 2 Y V - F V (3000 maximum) () round manual shift max dia 36 / hyd flow $2, hex manual shift max dia 36 / hyd flow $2, round electric shift (requires control box) max dia 36 / hyd flow $2, hex electric shift (requires control box) max dia 36 / hyd flow $2, electrical control box $ ft extension cable for 32 (loader arm routing) $ Y V F : V Y. Y,, X Y. / Y 2 Y V - F V (3000 maximum) () round manual shift max dia 36 / hyd flow $2, hex manual shift max dia 36 / hyd flow $2, round electric shift (requires control box) max dia 36 / hyd flow $2, hex electric shift (requires control box) max dia 36 / hyd flow $2, lectrical control box $ ft extension cable for 32 (loader arm routing) $ rices subject to change without notice. ll prices are in dollars.

27 V Q V ll system pressure translates into torque and productivity, no pressure reducers are used ll models feature reverse rotation for quick backout when obstructions are encountered he systems hydraulic relief valve protects the units from damage when the auger hits large immovable objects utput peed X4075 X4575 X5075 X6075 X8075 Flow peed peed peed peed peed utput peed X4075 X4575 X5075 X6075 X8075 Flow peed peed peed peed peed utput orque X4075 X4575 X5075 X6075 X8075 ressure orque orque orque orque orque lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft. Q V F - : V Y. Y,, X Y. Q V - (ase rain equired except X4575) (replaces X3450, X4450, X8000) () X hex planetary drive / max dia ax 4, $4, X hex planetary drive / max dia ax 3, $4, X hex planetary drive / max dia ax 3, $4, X hex planetary drive / max dia ax 3, $5, X hex planetary drive / max dia ax 3, $5, X hex planetary drive / max dia ax 3, $5, / Y 41

28 V Q V cont. Q V F XV : V Y. Y,, X Y. Q V - (ase rain equired except X4575) (replaces X3450, X4450, X8000) () X hex planetary drive / max dia ax 4, $4, X hex planetary drive / max dia ax 3, $4, X hex planetary drive / max dia ax 3, $4, X hex planetary drive / max dia ax 3, $5, X hex planetary drive / max dia ax 3, $5, X hex planetary drive / max dia ax 3, $5, F Q 2- V 2 peed shift on demand auger capable of turning up to a 48 auger bit 2.5 ex output shaft ase drain required / Y utput peed Flow peed Flow peed igh peed ow orque ow peed igh orque F Q 2- V F Q 2- V utput orque ressure orque ressure orque igh peed ow orque ow peed igh orque lb. ft lb. ft lb. ft lb. ft lb. ft lb. ft. : V Y. Y,, X Y. () hex shift on demand, high torque drive, max dia. 48 /30-45, 3800 psi $8, rices subject to change without notice. ll prices are in dollars.

29 V V F : V Y. Y,, X Y. V (3000 maximum) () round direct drive max dia 12 / hyd flow $1, Front nd oader ount ipper endulum ount endulum ount in rabber in rabber (radle eady) in rabber with radle Quick ttach Quick ttach (radle eady) Quick itch Quick itch (radle eady) / Y niversal kid-teer oader ount with radle eld-n niversal late eld-n niversal late (radle eady) 43

30 Z Y V Y (/, -/-, Q ) Z Y Y Y () radle for all X eries, igh orque, and 2 peed uger rives $87.33 F - X - X975 X5075 Quick ttach ount () niversal kid-teer oader ount with radle ith radle $ niversal kid-teer ounting (cradle ready) radle eady $ pecial ounting it for lass 2 allet Fork (cradle ready) radle eady $ V -30 (cradle ready) radle eady $ niversal wivel it -includes pins & clips - for customer-made mounts $88.20 X - X6075, X8075, 82 VY-Y Q () niversal kid-teer uger ount (cradle ready) radle eady $ eld-n ount eld-n niversal late. elds to customer made mount. (pivot) $ F Y / Y 44 rices subject to change without notice. ll prices are in dollars.

31 Z Y V Y (/, -/-, Q ) Z Y Y : F Y X - X975 X5075 () ipper endulum ount obcat 325 o radle $ obcat 337 o radle $ obcat 341 o radle $ obcat 442 o radle $ ase 9010 o radle $ ase X25 o radle $ ase X80 o radle $ aterpillar o radle $ aterpillar o radle $ aterpillar 307 / 308 / 70 o radle $ aterpillar 312/314 o radle $ aterpillar 315 o radle $ aterpillar 320/200 o radle $ aterpillar 325 o radle $ aewoo X35 o radle $ aewoo 5130 model 5 o radle $ aewoo / 170- o radle $ ehl 803 o radle $ itachi X50V o radle $ itachi 9 o radle $ yundai 200 o radle $ / 18J o radle $ J 8032Z o radle $ John eere 50/60 o radle $ John eere 200- o radle $ John eere 200 o radle $ John eere 490 o radle $ obelco 025 o radle $ obelco 200 o radle $ obelco 35 o radle $ omatsu 30 X-1 o radle $ omatsu 35 o radle $ omatsu 50-2 o radle $ omatsu 60 o radle $ omatsu 95/78 o radle $ omatsu 100 o radle $ F XV X / Y 45

32 / Y Z Y V Y (/, -/-, Q ) Z Y Y : F Y X - X975 X5075. ipper endulum ount cont. () ubota 28/170 (45mm pin) o radle $ ubota 35 / 41 / X36 / X41 / X41-2 (25mm pin) o radle $ ubota 60 / 61 / 66 / X61 / X71 (35mm pin) o radle $ ubota 90 / 91 / 101 / X91-2 / X101 / X121-2 / X-71-3 (40mm pin) o radle $ ubota 151 / 191 / X151 / X161-2 (45mm pin) o radle $ ubota X61-2 (30mm pin) o radle $ ubota X080 o radle $ inkbelt 2650 o radle $ ew olland 25 o radle $ ew olland 35 o radle $ ew olland 45 o radle $ amsung 50 o radle $ akeuchi 135 o radle $ akeuchi 070 / 175 / 180 o radle $ Volvo 15 includes hoses o radle $ Volvo 35 o radle $ Yanmar V070 o radle $ in-n tyle ount obcat 80 with erk rau oupler aterpillar 305 / aterpillar 321, 325 aterpillar 328, entral Fab X J ubota X121-3 ink elt 135, 2650Q, 130X Volvo 55 / o radle $ radle eady $ o radle $1, o radle $1, radle eady $ radle eady $ radle eady $ radle eady $ radle eady $1, Yanmar V20 o radle $ Quick ttach ount + (ain oy) #027 radle eady $ (ain oy) #030 o radle $1, (ain oy) #030 o radle $1, (ain oy) #034 & 036 o radle $1, F XV X 46 rices subject to change without notice. ll prices are in dollars.

33 Z Y V Y (/, -/-, Q ) Z Y Y : F Y X - X975 X5075. Quick ttach ount cont. John eere 27/35 mounting kit (pivot only) ubota X057, anada nly ubota X057, 55, nly ubota X080 with quick coupler (factory) ubota X161-3 / 45 (factory) (pivot only) ubota X41-3 / 15 (factory) (pivot only) ubota X71-3/X91-3/X121-3 / 35 (factory) (pivot only) () $ o radle $ radle eady $ radle eady $ radle eady $ o radle $ o radle $ o radle $ ubota 25 (factory) (pivot only) o radle $ Volvo 15/20 ith radle $ Volvo 25/30 ith radle $ Volvo 45/55 ith radle $1, ain oy 30/45 radle eady $ in rabber ase X160 radle eady $1, ase X80 (no dipper pin) ith radle $ aterpillar 307/308 radle eady $1, aterpillar 308 (pivot only) o radle $1, aterpillar radle eady $1, obelco 1150Z ith radle $1, omatsu 27-2 radle eady $ omatsu 45-8 radle eady $1, omatsu 138 radle eady $1, omatsu 58-3 (pivot only) o radle $ ubota radle eady $ ubota 45 radle eady $ ew olland 25 ith radle $ Yanmar 7 / V100 / V75 (pivot only) o radle $ Yanmar V027 / V035 (pivot only) o radle $ Yanmar V040 / V045 / V055 / V050 (pivot only) o radle $ / Y 47

34 Z Y V Y (/, -/-, Q ) Z Y Y VY Y : VY Y Q X6075, X8075, 82 niversal kid-teer () niversal kid-teer uger ount - order cradle separately $ in rabber aterpillar 311/312 (pivot only) o radle $1, aterpillar 311/312 o radle $1, aterpillar 330 o radle $2, John eere 200 with quick hitch (pivot only) o radle $1, obelco 115Z o radle $1, inkbelt (pivot only) o radle $2, ipper/endulum ount ase X80 (no dipper pin) o radle $ aterpillar 328 o radle $1, aterpillar o radle $ oosan X140 o radle $1, itachi X755 o radle $ omatsu 300 o radle $ ain oy 30 / 45 o radle $ F F X - X975 X5075 () / Y niversal Front nd oader ounting racket (olt-n) olts to loader arm or lip of bucket - not for use with kid-teer loaders - no welding involved o radle $ rices subject to change without notice. ll prices are in dollars.

35 Z Y V Y (/, -/-, Q ) Z Y Y : F Y X - X975 X5075 () Quick ttach ount obcat V518 / V523 radle eady $ arelift Z10044/12032/10055 radle eady $ aterpillar all / coupler mounts includes stop blocks radle eady $ radall / J eries itch radle eady $1, ew olland Versattach 430 / 640 / 840 / 850 / 860 radle eady $ ettibone 8044 radle eady $1, rak Q-hitch radle eady $ / Y 49

36 Z Y V Y (/, -/-, Q ) Z Y Y F X - X975 X5075 () Quick ttach ount ractor mount offset (compatible with universal kid-teer quick attach) radle eady $ obcat Xhange Q (welds to bucket blank) (pivot only) o radle $ eld-n ount eld-n niversal late (welds to customer made mount) (pivot only) o radle $ eld-n niversal late (welds to customer made mount) (cradle ready) radle eady $ F : F Y Quick ttach ount () J 212 Q-fit radle eady $1, John eere 400/500 with hoses & quick-couplers radle eady $ John eere 600/700 with hoses & quick -couplers radle eady $1, ractor mount offset (compatible with universal kid-teer quick attach) radle eady $ niversal front end loader bolts to loader arm or lip of bucket. ot for use with kid-teer loaders - no welding involved (pivot only) radle eady $ / Y 50 rices subject to change without notice. ll prices are in dollars.

37 Z Y V Y (/, -/-, Q ) Z Y Y F / : F Y X975 X5075 edicated Quick ttach ount () ubota 35, ackhoe 90 ith radle $ ubota 59 with 1200 ackhoe Quick ttach radle eady $ ubota 39 radle eady $ ipper/endulum tyle ounting ase 580/590 o radle $ aterpillar 416&/420/426/428/430/436/446 o radle $ aterpillar 446 o radle $ arth Force F4 o radle $ Fermec 790 o radle $ J 1400/1700/4X o radle $ John eere 310 / 410 o radle $ John eere 710 o radle $ John eere 310 o radle $ John eere 310/310J/310 o radle $ John eere 310/410/510 o radle $ John eere 310/310/410/410 o radle $ John eere 310J ith radle $ John eere 310J/310J/410J/410 (pin on) ith radle $ ew olland 400/500/600/700 series o radle $ ew olland 75 / 80 / 110 / 115 o radle $ Volvo 70 o radle $ in rabber ase 580/590 ith radle $1, J 214/4X radle eady $ John eere 310/410J/410 radle eady $1, omatsu 146 radle eady $1, ubota 520 radle eady $ Volvo 70 radle eady $1, / Y 51

38 Z Y V Y (/, -/-, Q ) Z Y Y VY Y F / : VY Y Q. X6075, X8075, 82 () in rabber ase 580/590 series o radle $1, ase 580/590 series radle $2, at 416/420/436 o radle $1, aterpillar 416/420/430 (pivot only) o radle $1, John eere 310/310J/310 (pivot only) o radle $1, John eere 310/310/410/410 (55mm pin and dipper width) o radle $1, ew olland 75/90/110/115 (pin grabber 15 3/4 center to center) (pivot only) o radle $ ew olland 75/90/110/115 (pin grabber 15 3/8 center to center) (pivot only) o radle $2, Quick itch + (ain oy) #030 o radle $1, (ain oy) 30/40 o radle $ (ain oy) 034/036 o radle $2, ipper endulum tyle ase 580/590 (1.75 pin and dipper width) o radle $ aterpillar 416/426/428/436 (50mm pin and dipper width) o radle $ J 214/1400/1700 (1.75 pin dipper width) o radle $ John eere 310/410/510 (1.75 pin dipper width) o radle $ John eere 310/410 o radle $ ew olland 400/500/600/700 o radle $ in n John eere 310J radle $1, / Y 52 rices subject to change without notice. ll prices are in dollars.

39 Z Y V Y (/, -/-, Q ) Z Y Y F : F Y X - X975 X5075 Quick ttach ount () FF Q 7000 Quick ttach ith radle $1, J Q-fit radle eady $ John eere 244 radle eady $ J 416 eries itch radle eady $1, J 416 ith radle $1, ubota 400/410/510/520 radle eady $ Volvo radle eady $ Y Y F - X - X975 X3575 () universal flat face couplers & (2) 108 long hoses $ ase old-style couplers & (2) 108 long hoses $ no couplers & (2) 108 long hoses with #12 o-ring thread $ no couplers & (2) 108 long hoses with thread $ V Y Q () flat face female coupler (.50 pipe thread) $52.79 flat face male coupler (.50 pipe thread) $38.30 flat face female coupler (12 o-ring) $48.65 flat face male coupler (12 o-ring) $28.98 F - Q V () no couplers & (2) 108 long hoses $ x.75 hose kits with drain line $ x.75 hose kits with drain line $ / Y 53

40 / Y Y cont. ().25 body male flat face coupler with adapter $ body male flat face coupler $ body female flat face coupler $43.47 F ().50 body male flat face coupler $ body female flat face coupler $ body male flat face coupler $ body female flat face coupler $ body male flat face coupler $ body female flat face coupler $ Y (FY ) ade for difficult ground conditions, compacted soils, heavy clay, asphalt, frozen ground and fracturable rock ugers feature heavy duty cast steel boring head, hardened drive-in gage (outside) and wisdom (inside) teeth quipped with hardened fishtail point and heavy-duty, double flighting 2 year warranty 3 Y pecifications iameter ooth QY 6" " " " " " " " " " " " () 3 tyle ugers 2 ound 6 x 3 (2 teeth) style auger 2 round $ x 3 (4 teeth) style auger 2 round $ x 3 (4 teeth) style auger 2 round $ x 3 (4 teeth) style auger 2 round $ x 3 (4 teeth) style auger 2 round $ x 3 (6 teeth) style auger 2 round $ x 3 (6 teeth) style auger 2 round $ x 3 (6 teeth) style auger 2 round $ x 3 (6 teeth) style auger 2 round $1, x 3 (8 teeth) style auger 2 round $1, x 3 (10 teeth) style auger 2 round $1, x 3 (12 teeth) style auger 2 round $1, Y. X 54 rices subject to change without notice. ll prices are in dollars.

41 Y (FY ). 3 Y. 3 tyle ugers 2.56 ound () 6 x 3 (2 teeth) style auger 2.56 round $ x 3 (4 teeth) style auger 2.56 round $ x 3 (4 teeth) style auger 2.56 round $ x 3 (4 teeth) style auger 2.56 round $ x 3 (4 teeth) style auger 2.56 round $ x 3 (6 teeth) style auger 2.56 round $ x 3 (6 teeth) style auger 2.56 round $ x 3 (6 teeth) style auger 2.56 round $ x 3 (6 teeth) style auger 2.56 round $1, x 3 (8 teeth) style auger 2.56 round $1, x 3 (10 teeth) style auger 2.56 round $1, x 3 (12 teeth) style auger 2.56 round $1, tyle ugers 2 ex 6 x 3 (2 teeth) style auger 2 hex $ x 3 (4 teeth) style auger 2 hex $ x 3 (4 teeth) style auger 2 hex $ x 3 (4 teeth) style auger 2 hex $ x 3 (4 teeth) style auger 2 hex $ x 3 (6 teeth) style auger 2 hex $ x 3 (6 teeth) style auger 2 hex $ x 3 (6 teeth) style auger 2 hex $ x 3 (6 teeth) style auger 2 hex $1, x 3 (8 teeth) style auger 2 hex $1, x 3 (10 teeth) style auger 2 hex $1, x 3 (12 teeth) style auger 2 hex $1, Y 4 tyle ugers 2 ound () 6 x 4 (2 teeth) style auger 2 round $ x 4 (4 teeth) style auger 2 round $ x 4 (4 teeth) style auger 2 round $ x 4 (4 teeth) style auger 2 round $ x 4 (4 teeth) style auger 2 round $ x 4 (6 teeth) style auger 2 round $ x 4 (6 teeth) style auger 2 round $ x 4 (6 teeth) style auger 2 round $ x 4 (6 teeth) style auger 2 round $1, x 4 (8 teeth) style auger 2 round $1, x 4 (10 teeth) style auger 2 round $1, x 4 (12 teeth) style auger 2 round $1, Y X / Y 55

42 / Y Y (FY ). 4 Y. 4 tyle ugers 2.56 ound () 6 x 4 (2 teeth) style auger 2.56 round $ x 4 (4 teeth) style auger 2.56 round $ x 4 (4 teeth) style auger 2.56 round $ x 4 (4 teeth) style auger 2.56 round $ x 4 (4 teeth) style auger 2.56 round $ x 4 (6 teeth) style auger 2.56 round $ x 4 (6 teeth) style auger 2.56 round $ x 4 (6 teeth) style auger 2.56 round $ x 4 (6 teeth) style auger 2.56 round $1, x 4 (8 teeth) style auger 2.56 round $1, x 4 (10 teeth) style auger 2.56 round $1, x 4 (12 teeth) style auger 2.56 round $1, x 4 (16 teeth) style auger 2.56 round $2, x 4 (20 teeth) style auger 2.56 round $2, tyle ugers 2 ex 6 x 4 (2 teeth) style auger 2 hex $ x 4 (4 teeth) style auger 2 hex $ x 4 (4 teeth) style auger 2 hex $ x 4 (4 teeth) style auger 2 hex $ x 4 (4 teeth) style auger 2 hex $ x 4 (6 teeth) style auger 2 hex $ x 4 (6 teeth) style auger 2 hex $ x 4 (6 teeth) style auger 2 hex $ x 4 (6 teeth) style auger 2 hex $1, x 4 (8 teeth) style auger 2 hex $1, x 4 (10 teeth) style auger 2 hex $1, x 4 (12 teeth) style auger 2 hex $1, x 4 (16 teeth) style auger 2 hex $2, x 4 (20 teeth) style auger 2 hex $2, Y 5 tyle ugers 2 ex () 6" x 5' (2 teeth) style auger 2" hex $ " x 5' (4 teeth) style auger 2" hex $ " x 5' (4 teeth) style auger 2" hex $ " x 5' (4 teeth) style auger 2" hex $ " x 5' (4 teeth) style auger 2" hex $ " x 5' (6 teeth) style auger 2" hex $ " x 5' (6 teeth) style auger 2" hex $ " x 5' (6 teeth) style auger 2" hex $1, " x 5' (8 teeth) style auger 2" hex $1, " x 5' (10 teeth) style auger 2" hex $1, " x 5' (12 teeth) style auger 2" hex $2, Y X 56 rices subject to change without notice. ll prices are in dollars.

43 Y (FY ). 5 Y. 5 tyle ugers 2 ound () 6" x 5' (2 teeth) style auger 2" round $ " x 5' (4 teeth) style auger 2" round $ " x 5' (4 teeth) style auger 2" round $ " x 5' (4 teeth) style auger 2" round $ " x 5' (6 teeth) style auger 2" round $ " x 5' (6 teeth) style auger 2" round $ " x 5' (6 teeth) style auger 2" round $1, " x 5' (6 teeth) style auger 2" round $1, " x 5' (8 teeth) style auger 2" round $1, " x 5' (10 teeth) style auger 2" round $1, " x 5' (12 teeth) style auger 2" round $2, tyle ugers 2.56 ound 6" x 5' (2 teeth) style auger 2.56" round $ " x 5' (4 teeth) style auger 2.56" round $ " x 5' (4 teeth) style auger 2.56" round $ " x 5' (4 teeth) style auger 2.56" round $ " x 5' (6 teeth) style auger 2.56" round $ " x 5' (8 teeth) style auger 2.56" round $1, " x 5' (10 teeth) style auger 2.56" round $1, " x 5' (12 teeth) style auger 2.56" round $2, Y 6 tyle ugers 2 ex () 6" x 6' (2 teeth) style auger 2" hex $ " x 6' (4 teeth) style auger 2" hex $ " x 6' (4 teeth) style auger 2" hex $ " x 6' (4 teeth) style auger 2" hex $ " x 6' (4 teeth) style auger 2" hex $ " x 6' (6 teeth) style auger 2" hex $1, " x 6' (6 teeth) style auger 2" hex $1, " x 6' (8 teeth) style auger 2" hex $1, " x 6' (10 teeth) style auger 2" hex $2, " x 6' (12 teeth) style auger 2" hex $2, Y X / Y 57

44 Y. 6 Y. 6 tyle ugers 2 ound () 6" x 6' (2 teeth) style auger 2" round $ " x 6' (4 teeth) style auger 2" round $ " x 6' (4 teeth) style auger 2" round $ " x 6' (4 teeth) style auger 2" round $ " x 6' (4 teeth) style auger 2" round $ " x 6' (6 teeth) style auger 2" round $ " x 6' (6 teeth) style auger 2" round $1, " x 6' (6 teeth) style auger 2" round $1, " x 6' (6 teeth) style auger 2" round $1, " x 6' (8 teeth) style auger 2" round $1, " x 6' (10 teeth) style auger 2" round $2, " x 6' (12 teeth) style auger 2" round $2, tyle ugers 2.56 ound 6" x 6' (2 teeth) style auger 2.56" round $ " x 6' (4 teeth) style auger 2.56" round $ " x 6' (4 teeth) style auger 2.56" round $ " x 6' (4 teeth) style auger 2.56" round $ " x 6' (4 teeth) style auger 2.56" round $ " x 6' (6 teeth) style auger 2.56" round $1, " x 6' (6 teeth) style auger 2.56" round $1, " x 6' (6 teeth) style auger 2.56" round $1, " x 6' (8 teeth) style auger 2.56" round $1, " x 6' (10 teeth) style auger 2.56" round $2, " x 6' (12 teeth) style auger 2.56" round $2, / Y 58 rices subject to change without notice. ll prices are in dollars.

45 F Y ade for light to moderate ground conditions F augers feature a fabricated boring head with hardened bolt-on gage (outside) and wisdom (inside) teeth, as well as a hardened fishtail point quipped with heavy-duty double flighting 2 year warranty 3 F Y F pecifications iameter ooth QY 4" 102 6" " " " " " " " " " " " () 3 F tyle ugers 2 ex 4 x 3 (fishtail point only) F tyle auger 6 x 3 (2 teeth) F style auger 2 hex $ x 3 (2 teeth) F style auger 2 hex $ x 3 (3 teeth) F style auger 2 hex $ x 3 (3 teeth) F style auger 2 hex $ x 3 (4 teeth) F style auger 2 hex $ x 3 (5 teeth) F style auger 2 hex $ x 3 (5 teeth) F style auger 2 hex $ x 3 (6 teeth) F style auger 2 hex $ x 3 (6 teeth) F style auger 2 hex $ x 3 (8 teeth) F style auger 2 hex $ x 3 (9 teeth) F style auger 2 hex $ F tyle ugers 2 ound 6 x 3 (2 teeth) F style auger 2 round $ x 3 (2 teeth) F style auger 2 round $ x 3 (3 teeth) F style auger 2 round $ x 3 (3 teeth) F style auger 2 round $ x 3 (4 teeth) F style auger 2 round $ x 3 (5 teeth) F style auger 2 round $ x 3 (5 teeth) F style auger 2 round $ x 3 (6 teeth) F style auger 2 round $ x 3 (6 teeth) F style auger 2 round $ x 3 (8 teeth) F style auger 2 round $ x 3 (9 teeth) F style auger 2 round $ x 3 (11 teeth) F style auger 2 round $1, F Y X / Y 59

46 / Y F Y. 3 F Y. 3 F tyle ugers 2.56 ound () 6 x 3 (2 teeth) F style auger 2.56 round $ x 3 (2 teeth) F style auger 2.56 round $ x 3 (3 teeth) F style auger 2.56 round $ x 3 (3 teeth) F style auger 2.56 round $ x 3 (4 teeth) F style auger 2.56 round $ x 3 (5 teeth) F style auger 2.56 round $ x 3 (5 teeth) F style auger 2.56 round $ x 3 (6 teeth) F style auger 2.56 round $ x 3 (6 teeth) F style auger 2.56 round $ x 3 (8 teeth) F style auger 2.56 round $ x 3 (9 teeth) F style auger 2.56 round $ x 3 (11 teeth) F style auger 2.56 round $1, F tyle ugers 2 ex 4 x 4 (fishtail point only) F tyle auger $ x 4 (2 teeth) F style auger 2 hex $ x 4 (2 teeth) F style auger 2 hex $ x 4 (3 teeth) F style auger 2 hex $ x 4 (3 teeth) F style auger 2 hex $ x 4 (4 teeth) F style auger 2 hex $ x 4 (5 teeth) F style auger 2 hex $ x 4 (5 teeth) F style auger 2 hex $ x 4 (6 teeth) F style auger 2 hex $ x 4 (6 teeth) F style auger 2 hex $ x 4 (8 teeth) F style auger 2 hex $ x 4 (9 teeth) F style auger 2 hex $1, F tyle ugers 2 ound 4 x 4 (fishtail point only) F style auger 2 round $ x 4 (2 teeth) F style auger 2 round $ x 4 (2 teeth) F style auger 2 round $ x 4 (3 teeth) F style auger 2 round $ x 4 (3 teeth) F style auger 2 round $ x 4 (4 teeth) F style auger 2 round $ x 4 (5 teeth) F style auger 2 round $ x 4 (6 teeth) F style auger 2 round $ x 4 (6 teeth) F style auger 2 round $ x 4 (8 teeth) F style auger 2 round $ x 4 (9 teeth) F style auger 2 round $1, x 4 (11 teeth) F style auger 2 round $1, F Y X 60 rices subject to change without notice. ll prices are in dollars.

47 F Y. 4 F Y. 4 F tyle ugers 2.56 ound () 4 x 4 (fishtail point only) F style auger 2.56 round $ x 4 (2 teeth) F style auger 2.56 round $ x 4 (2 teeth) F style auger 2.56 round $ x 4 (3 teeth) F style auger 2.56 round $ x 4 (3 teeth) F style auger 2.56 round $ x 4 (4 teeth) F style auger 2.56 round $ x 4 (5 teeth) F style auger 2.56 round $ x 4 (5 teeth) F style auger 2.56 round $ x 4 (6 teeth) F style auger 2.56 round $ x 4 (6 teeth) F style auger 2.56 round $ x 4 (8 teeth) F style auger 2.56 round $ x 4 (9 teeth) F style auger 2.56 round $1, x 4 (11 teeth) F style auger 2.56 round $1, F tyle ugers 2 ex 4" x 5' (fishtail point only) F style 2" hex $ " x 5' (2 teeth) F style auger 2" hex $ " x 5' (2 teeth) F style auger 2" hex $ " x 5' (3 teeth) F style auger 2" hex $ " x 5' (3 teeth) F style auger 2" hex $ " x 5' (4 teeth) F style auger 2" hex $ " x 5' (5 teeth) F style auger 2" hex $ " x 5' (5 teeth) F style auger 2" hex $ " x 5' (6 teeth) F style auger 2" hex $1, " x 5' (8 teeth) F style auger 2" hex $1, " x 5' (9 teeth) F style auger 2" hex $1, " x 5' (11 teeth) F style auger 2" hex $1, F tyle ugers 2 ound 4" x 5' (fishtail point only) F style 2" round $ " x 5' (2 teeth) F style auger 2" round $ " x 5' (2 teeth) F style auger 2" round $ " x 5' (3 teeth) F style auger 2" round $ " x 5' (3 teeth) F style auger 2" round $ " x 5' (4 teeth) F style auger 2" round $ " x 5' (5 teeth) F style auger 2" round $ " x 5' (5 teeth) F style auger 2" round $ " x 5' (6 teeth) F style auger 2" round $ " x 5' (6 teeth) F style auger 2" round $1, " x 5' (8 teeth) F style auger 2" round $1, " x 5' (9 teeth) F style auger 2" round $1, " x 5' (11 teeth) F style auger 2" round $1, F Y X / Y 61

48 / Y F Y. 5 F Y 5 F tyle ugers 2.56 ound () 6" x 5' (2 teeth) F style auger 2.56" round $ " x 5' (2 teeth) F style auger 2.56" round $ " x 5' (3 teeth) F style auger 2.56" round $ " x 5' (3 teeth) F style auger 2.56" round $ " x 5' (4 teeth) F style auger 2.56" round $ " x 5' (5 teeth) F style auger 2.56" round $ " x 5' (5 teeth) F style auger 2.56" round $ " x 5' (6 teeth) F style auger 2.56" round $ " x 5' (6 teeth) F style auger 2.56" round $1, " x 5' (8 teeth) F style auger 2.56" round $1, " x 5' (9 teeth) F style auger 2.56" round $1, " x 5' (11 teeth) F style auger 2.56" round $1, F tyle ugers 2 ex 4" x 6' (fishtail point only) F style 2" hex $ " x 6' (2 teeth) F style auger 2" hex $ " x 6' (2 teeth) F style auger 2" hex $ " x 6' (3 teeth) F style auger 2" hex $ " x 6' (3 teeth) F style auger 2" hex $ " x 6' (4 teeth) F style auger 2" hex $ " x 6' (5 teeth) F style auger 2" hex $ " x 6' (5 teeth) F style auger 2" hex $1, " x 6' (6 teeth) F style auger 2" hex $1, " x 6' (6 teeth) F style auger 2" hex $1, " x 6' (8 teeth) F style auger 2" hex $1, " x 6' (9 teeth) F style auger 2" hex $2, " x 6' (11 teeth) F style auger 2" hex $2, F tyle ugers 2 ound 4" x 6' (fishtail point only) F style 2" round $ " x 6' (2 teeth) F style auger 2" round $ " x 6' (2 teeth) F style auger 2" round $ " x 6' (3 teeth) F style auger 2" round $ " x 6' (3 teeth) F style auger 2" round $ " x 6' (4 teeth) F style auger 2" round $ " x 6' (5 teeth) F style auger 2" round $ " x 6' (5 teeth) F style auger 2" round $1, " x 6' (6 teeth) F style auger 2" round $1, " x 6' (6 teeth) F style auger 2" round $1, " x 6' (8 teeth) F style auger 2" round $1, " x 6' (9 teeth) F style auger 2" round $2, " x 6' (11 teeth) F style auger 2" round $2, F Y X 62 rices subject to change without notice. ll prices are in dollars.

49 F Y. F Y 6 F Y ade for tree and shrub planting F augers have a 2" diameter design with a fabricated boring head and hardened bold-on gauge (outside) and wisdom (inside) teeth ome equipped with a hardened fishtail point and heavy-duty double flighting 2 year warranty. 4 F Y 4 F-tyle ugers 2 ound () 18 x 4 (7 teeth) F style auger 2 round $ x 4 (10 teeth) F style auger 2 round $ x 4 (11 teeth) F style auger 2 round $ x 4 (13 teeth) F style auger 2 round $1, F-tyle ugers 2.56 ound 18 x 4 (7 teeth) F style auger 2.56 round $ x 4 (10 teeth) F style auger 2.56 round $ x 4 (11 teeth) F style auger 2.56 round $ x 4 (13 teeth) F style auger 2.56 round $1, x 4 (15 teeth) F style auger 2.56 round $1, x 4 (17 teeth) F style auger 2.56 round $2, F-tyle ugers 2" ex () F pecifications iameter 18 x 4 (7 teeth) F style auger 2 hex $ x 4 (10 teeth) F style auger 2 hex $ x 4 (11 teeth) F style auger 2 hex $ x 4 (13 teeth) F style auger 2 hex $1, x 4 (15 teeth) F style auger 2 hex $1, x 4 (17 teeth) F style auger 2 hex $2, ooth QY 6 F tyle ugers 2.56 ound 4" x 6' (fishtail point only) F style 2.56" round $ " x 6' (2 teeth) F style auger 2.56" round $ " x 6' (2 teeth) F style auger 2.56" round $ " x 6' (3 teeth) F style auger 2.56" round $ " x 6' (3 teeth) F style auger 2.56" round $ " x 6' (4 teeth) F style auger 2.56" round $ " x 6' (5 teeth) F style auger 2.56" round $ " x 6' (6 teeth) F style auger 2.56" round $1, " x 6' (6 teeth) F style auger 2.56" round $1, " x 6' (8 teeth) F style auger 2.56" round $1, " x 6' (9 teeth) F style auger 2.56" round $2, " x 6' (11 teeth) F style auger 2.56" round $2, uger ize 18" ' 24" ' 30" ' 36" ' 42" ' 48" ' / Y 63

50 / Y Y (FY ) Y ade for difficult ground conditions, compacted soils, heavy clay, asphalt, frozen ground, and fracturable rock Feature a fabricated boring head with bolt-on gage and wisdom teeth. tandard or carbide teeth and point and wear components are available for this auger quipped with heavy-duty.3125 thick flighting and heavy-duty center shaft, 3.75 tubing x.3125 wall ollars are available in 2.5 hexagon and hexagon styles 2 year warranty : 2.62 X V ( FY) 40 of Flighting with tandard eeth () 9 x 103 (2 standard teeth) style auger 2.5 hex $1, x 103 (2 standard teeth) style auger 2.5 hex $1, x 103 (4 standard teeth) style auger 2.5 hex $1, x 103 (4 standard teeth) style auger 2.5 hex $1, x 103 (4 standard teeth) style auger 2.5 hex $1, x 103 (6 standard teeth) style auger 2.5 hex $2, x 103 (6 standard teeth) style auger 2.5 hex $2, x 103 (7 standard teeth) style auger 2.5 hex $2, x 103 (8 standard teeth) style auger 2.5 hex $2, x 103 (8 standard teeth) style auger 2.5 hex $3, x 103 (10 standard teeth) style auger 2.5 hex $5, x 103 (13 standard teeth) style auger 2.5 hex $5, of Flighting with arbide eeth 8 x 103 (2 carbide teeth) style auger 2.5 hex $1, x 103 (2 carbide teeth) style auger 2.5 hex $1, x 103 (2 carbide teeth) style auger 2.5 hex $1, x 103 (4 carbide teeth) style auger 2.5 hex $1, x 103 (4 carbide teeth) style auger 2.5 hex $1, x 103 (4 carbide teeth) style auger 2.5 hex $2, x 103 (6 carbide teeth) style auger 2.5 hex $2, x 103 (6 carbide teeth) style auger 2.5 hex $2, x 103 (7 carbide teeth) style auger 2.5 hex $2, x 103 (8 carbide teeth) style auger 2.5 hex $3, x 103 (8 carbide teeth) style auger 2.5 hex $4, x 103 (10 carbide teeth) style auger 2.5 hex $5, x 103 (13 carbide teeth) style auger 2.5 hex $6, tyle ugers continued next page pecifications iameter Flighting ength ooth QY verall ength 8" " or 60" 2 103" 9" or " 10" or " 12" or " 14" or " 16" or " 18" or " 20" or " 24" or " 30" or " 36" " or 60" 8 103" 64 rices subject to change without notice. ll prices are in dollars.

51 Y (FY ). Y. 60 of Flighting with tandard eeth () 9 x 103 (2 standard teeth) style auger 2.5 hex $1, x 103 (2 standard teeth) style auger 2.5 hex $1, x 103 (4 standard teeth) style auger 2.5 hex $1, x 103 (4 standard teeth) style auger 2.5 hex $1, x 103 (4 standard teeth) style auger 2.5 hex $2, x 103 (6 standard teeth) style auger 2.5 hex $2, x 103 (6 standard teeth) style auger 2.5 hex $2, x 103 (7 standard teeth) style auger 2.5 hex $2, x 103 (8 standard teeth) style auger 2.5 hex $3, x 103 (8 standard teeth) style auger 2.5 hex $4, x 103 (10 standard teeth) style auger 2.5 hex $5, x 103 (13 standard teeth) style auger 2.5 hex $6, of Flighting with arbide eeth 9 x 103 (2 carbide teeth) style auger 2.5 hex $1, x 103 (2 carbide teeth) style auger 2.5 hex $1, x 103 (4 carbide teeth) style auger 2.5 hex $1, x 103 (4 carbide teeth) style auger 2.5 hex $2, x 103 (4 carbide teeth) style auger 2.5 hex $2, x 103 (6 carbide teeth) style auger 2.5 hex $2, x 103 (6 carbide teeth) style auger 2.5 hex $2, x 103 (7 carbide teeth) style auger 2.5 hex $2, x 103 (8 carbide teeth) style auger 2.5 hex $3, x 103 (8 carbide teeth) style auger 2.5 hex $4, x 103 (10 carbide teeth) style auger 2.5 hex $5, x 103 (13 carbide teeth) style auger 2.5 hex $6, / Y 65

52 ade for solid, fracturable rock, frozen ground and compacted soils Feature bullet style teeth and a fabricated boring head, as well as heavy-duty single flighting omes in 2" hexagon collar only and is available in 4' length.75" thick bottom flight and a hardface outer edge 2 year warranty ullet ooth pecifications iameter ooth QY 6" " " " " " " " " " evere ock ipper ugers 2 ex () 6 x 48 ock uger 2 hex $ x 48 ock uger 2 hex $ x 48 ock uger 2 hex $1, x 48 ock uger 2 hex $1, x 48 ock uger 2 hex $2, x 48 ock uger 2 hex $2, x 48 ock uger 2 hex $2, x 48 ock uger 2 hex $2, x 48 ock uger 2 hex $3, ilot bit assembly $ ullet tooth,.77 dia. shank $27.30 / Y 66 rices subject to change without notice. ll prices are in dollars.

53 F F F F F For F & F tyle ugers () F Q fishtail point, 3.5 for F, & F style augers $42.42 fishtail point carbide for F, & F style augers $ fishtail point hard surfaced for F, & F style augers $58.80 F fishtail point, 4.5 for 4 F style augers only $14.55 gage tooth (outside) for g,, F & F style augers $7.78 wisdom tooth (inside) for g,, F & F style augers $5.56 carbide tooth (inside and outside) for g,, F, & F style augers $16.94 chisel tooth for g,, & F style augers $4.45 chisel tooth carbide for g, & F style augers $18.00 bolt,.625 for g, F & F style augers $1.17 nut,.625 for g, F & F style augers $1.17 F fishtail point for g style augers $9.70 For tyle ugers fishtail point, 3.5 for F, & F style augers $42.42 fishtail point carbide for F, & F style augers $ fishtail point hard surfaced for F, & F style augers $58.80 gage tooth (outside) for g,, F & F style augers $7.78 wisdom tooth (inside) for g,, F & F style augers $5.56 carbide tooth (inside and outside) for g,, F, & F style augers $16.94 chisel tooth for g,, & F style augers $4.45 chisel tooth carbide for g, & F style augers $18.00 rubber lock for & style augers $1.10 For tyle ugers (no longer available) rock auger tooth for style augers $13.76 pilot bit 2.38 taper thread (bullet) 5 wide female slot $ For / F tyle ugers dirt (standard) pilot for F& style augers $19.89 gage (dirt) tooth (outside) for F & style augers $10.10 dirt tooth (inside) for F & style augers $9.92 F fishtail point carbide for F & style augers $29.40 gage (carbide) tooth (outside) for F & style augers $40.40 carbide tooth (inside) for F & style augers $18.00 rubber lock for & style augers $1.10 bolt,.875 for F style augers $13.33 nut,.875 for F style augers $1.59 tandard ear omponents continued next page / Y 67

54 F cont. F For ock ipper tyle ugers () ilot bit assembly $ ullet tooth,.77 dia. shank $27.30 ooth holder $15.58 / F, F,, F Y :. () hard-faced wisdom $8.09 carbide wisdom $16.94 hardened chisel $4.45 hard-faced chisel $12.82 carbide chisel $ hard-faced fishtail (male) $ carbide fishtail (male) $ hard-faced/carbide fishtail (male) $ hard-faced fishtail (female) $ carbide fishtail (female) $ hard-faced/carbide (female) $ hard-faced fishtail $ hard-faced/carbide fishtail $ round auger collar $ round auger collar $ hex auger collar $ hex auger collar $ hex auger collar $69.30 / Y 68 rices subject to change without notice. ll prices are in dollars.

55 pecifications utput haft ize ype ollar pening ize ype 2" exagon 50 2" ound " ound 65 2" ound 51 2" exagon " ound " ound 65 2" exagon 51 2" exagon 51 2" exagon 51 V V V V. V F Z Y ( X). rive nit to uger ollar () 2.00 round to 2.00 hex $ round to 2.56 round $ round to 2.00 round $ round to 2.00 hex $ hex to 2.00 round $ hex to 2.56 round $ hex to 2.50 hex $ hex to 2.00 hex $ hex to 2.00 hex $ hex to 2.62 hex $ hex to 2.50 hex $ / Y 69

56 X FX X Fixed length auger extensions extend the augers digging depth to exactly the length of the extension cillen Fixed ength xtensions are available with 2" round, " round, 2" hexagon, 2.5" hexagon or 2.625" hexagon collars hese extensions do not store within the auger. pecifications xt. ength round round hex hex hex 12" " " " " ound X - FX () 12 X 2.56 ound Fixed ength xtension $ X 2.56 ound Fixed ength xtension $ X 2.56 ound Fixed ength xtension $ X 2.56 ound Fixed ength xtension $ X 2.56 ound Fixed ength xtension $ ex 12 X 2 ex Fixed ength xtension $ X 2 ex Fixed ength xtension $ X 2 ex Fixed ength xtension $ X 2 ex Fixed ength xtension $ X 2 ex Fixed ength xtension $ X 2 ex (d ube) Fixed ength xtension $ X 2 ex (d ube) Fixed ength xtension $ X 2 ex (d ube) Fixed ength xtension $ & 2.62 ex 72 X 2.50 ex (8000/142) Fixed ength xtension $ X 2.62 ex (8000/142) Fixed ength xtension $ / Y 70 rices subject to change without notice. ll prices are in dollars.

57 X V X Variable length auger extensions store inside the center tube of the augers that are 10" diameter or larger xtension increments are every 6" on 12" through 24" extensions and every 12" on 48" 72" extensions Variable length extensions are available with 2" round, " round, 2" hexagon, 2.5 hexagon, or " hexagon collars pecifications xt. ength round round hex hex hex 12" " " " " ound X - V () 12 X 2.56 ound Variable ength xtension $ X 2.56 ound Variable ength xtension $ X 2.56 ound Variable ength xtension $ X 2.56 ound Variable ength xtension $ X 2.56 ound Variable ength xtension $ ex 12 X 2 ex Variable ength xtension $ X 2 ex Variable ength xtension $ X 2 ex Variable ength xtension $ X 2 ex Variable ength xtension $ X 2 ex Variable ength xtension $ & 2.62 ex 72 X 2.50 ex Variable ength xtension $ X 2.62 ex Variable ength xtension $1, / Y 71

58 X F Y X 3 Ft. X - F Y () 8" ia X 3' Flight ody xtension $ Ft. 6" ia X 4' Flight ody xtension $ " ia X 4' Flight ody xtension $ " ia X 4' Flight ody xtension $ Ft. 6" ia X 5' Flight ody xtension $ " ia X 5' Flight ody xtension $ " ia X 5' Flight ody xtension $ " ia X 5' Flight ody xtension $ Ft. 6" ia X 6' Flight ody xtension $ " ia X 6' Flight ody xtension $ " ia X 6' Flight ody xtension $ " ia X 6' Flight ody xtension $ / Y 72 rices subject to change without notice. ll prices are in dollars.

59

60 radco ackhoes, by aladin, are designed to fit compact tractors, compact tractor loaders, compact tool carriers, and kid-teers. radco offers multiple classes depending upon desired weight and digging force. igging depths range from 78 to 132. niversal quick attach/mainframe mount xclusive 8-bolt mounting pattern on mainframe provides easy interchange of mountings for use on multiple carriers ptimized performance at 9-12 hydraulic flow / Y F efore ordering your backhoe, review the Fit p harts to determine which models are compatible with your kid-teer or ractor. o order a complete ackhoe ssembly select a ackhoe, ucket, tabilizer ads, ounting, and ydraulic it rices subject to change without notice. ll prices are in dollars.

61 F ushioned cylinders for boom, dipper and swing provide smoother operation with less slamming and pressure spiking. wing speed control allows the operator to fully adjust the swing speed to the job. standard flow control valve limits the oil flow to allow for optimal operating speed (optional on 485 model). pherical ball bushings isolate the cylinder alignment and increase the rotating bearing surface at the joint. standard thumb bracket has been pre-fitted. o welding is required. asy controls - left lever runs boom and swing, right lever runs bucket and dipper while the middle levers run right and left stabilizers. F 3 bucket linkage options boom lock prevents the boom from moving during transport. he swing lock prevents the boom from swinging during transportation. ell ole position allows bucket to open further and extend bucket reach tandard position provides 180 rotation and allows bucket to move to max-curl position ower ig position allows application of maximum breakout force asy clean-out bucket design. eaped bucket capacities from 0.61 ft ft. 3 depending upon bucket selection. / Y 75

62 F F F V osi-rak/erex 50/60, 4500/4520/4810,70, 85/100, 70, 80 obcat 50/52 743, 751, 753, 763, 773/773, 7753/130, 843/843, 853, 863/863, 863/864/200, 873/873, 530, 550, 570, 590, 150/1160/180/205, 175/185/190/190, 250/ 250/300/300/300 ase X25/X29/X33, X48/X55** 410, 1838, 1840*, 1845, 40X/420, 60X/430, 70X/440, 75X/ X/445, 90X/95X/450/465, X48/X55, V380, 270, V300, V250, 250, 220, 200, V185, 175, 150, 130 aterpillar 295, 265/275/ /226/228, 232/236/242/242/246/248/252/262/267, 247/257/257/259, 277/287, 272, 295, 265/275/ 285, 265, 285/295 aterpillar with xcavator ontrol attern* 216/226/228, 236/246/248/252/ /226/228, 236/246/248/252/262 aewoo/oosan 601, 801, 1760/450/802, 1340 X/602/430, 1550 X/702/440, 2060 X/902/460/470 yundai 650-7/850-7, 610/710, 810 J obots 160, 170, 165, 185, 190/190, 1110/1110, 1105 John eere 240/250/260/270/280/317/320/322/325/328/332, 4475/5575, 675/6675/7775, 8875 ew olland 465/X465/X485/140, 510/140./150., 553/555, 565/X565/X665/160, 170/160./170./175/175, 784/785X985/190/190/190., 238/232/227/230/ 225/223, 215/213, 220/218, 215/213 akeuchi 26, 120/220, 130/230, 140/240, 150/250 / Y 76 rices subject to change without notice. ll prices are in dollars.

63 /4520/4810,70, 85/100, 70, , 753, 763, 773/773, 7753/130, 843/843, 853, 863/863, 863/864/ 200, 873/873, 530, 550, 570, 590, 150/1160/180/205, 175/ 185/190/190, 250/250/300/300/ /4520/4810,70, 85/100, 70, /4520/4810,70, 85/100, 70, , 753, 763, 773/773, 7753/130, 843/843, 853, 863/863, 863/864/200, 873/873, 550, 570, 590, 150/1160/180/205, 175/185/ 190/190, 250/250/300/300/ /773, 7753/130, 843/843*, 853*, 863/863*, 863/864/200, 873/873, 590, 175/185/190/190, 250/250/ 300/300/ , 1840*, 1845, 40X/420, 60X/430, 70X/440, 75X/ X/445, 90X/95X/450/465, X48/X55, V380, 270, V300, V250, 250, 220, 200, V185, 175, 150, /226/228, 232/236/242/242/246/2 48/252/262/267, 247/257/257/259, 277/287, 272, 295, 265/275/ 285, 265, 285/ , 1840*, 1845, 40X/420, 60X/430, 70X/440, 75X/ X/445, 90X/95X/450/465, V380, 270, V300, V250, 250, 220, 200, V185, 175, 150, /226/228, 232/236/242/242/246/248/252/262 /267, 247/257/257/259, 277/287, 272, 295, 285/295 60X/430, 70X/440, 75X/ X/445, 90X/95X/450/465, V380, 270, V300, V250, 250, 220, 200, V185, /236/242/242/246/248/252/262/267, 247/257/257/259, 277/287, /226/228, 236/246/248/252/ /226/228, 236/246/248/252/ /246/248/252/ , 801, 1760/450/802, 1340 X/602/430, 1550 X/702/440, 2060 X/902/460/ , 1760/450/802, 1340 X/602/430, 1550 X/702/440, 2060 X/902/460/ /850-7, 610/710, /850-7, 610/710, , 170, 165, 185, 190/190, 1110/1110, /250/260/270/280/317/320/322/325/32 8/332, 4475/5575, 675/6675/7775, /555, 565/X565/X665/160, 170/160./170./175/175, 784/785, X985/190/190/190., 238/232/227/230/225/223, 215/ 213, 220/218, 215/ , 1760/450/802, 1550 X/702/440, 2060 X/902/460/ , 185, 190/190, 1110/1110, , 190/190, 1110/1110, /250/260/270/280/317/320/322/325/328/332, 675/6675/7775, /555, 565/X565/X665/160, 170/ 160./170./175/175, 784/785, 865/ X865/X885/180/180./185., X985/ 190/190/190., 238/232/227/230/ 225/223, 215/213, 220/218, 215/ /250/260/270/280/317/320/322/325/32 8/332, /785, 865/X865/X885/180/ 180./185., X985/190/190/ 190., 238/232/227/230/225/ 223, 215/213, 220/218 26, 120/220, 130/230, 140/ 240, 150/250 26, 130/230, 140/240, 150/250 26, 130/230, 140/240, 150/ 250 / Y 77

64 F F F assey-ferguson 1440V, 1533/ , 1145, 1160, 1180, 1190, 1250, 1260, 1533/1534 F F John eere 790, 3120/3320/3520/ 3710/3720/4210, 4200/4300/4310/ 4400/4410, 4120/4320/ 4520/ , 1070, 4120/4320/4520/4720, 4500/4510/4600/4610/4700/4710, 5025/5225/5325/5425/5525/5625, 5200/5210/5300/5310/5400/ w/520 loader, 5200/5210/5300/5310/5400/ w/520 loader, 5220/5320/5420/5520 ubota ew olland 2630/3030 w 403 loader, 2710/2910/ 7800/2360/3030, 7510/265 backhoe only, 7500/2630/3030, 2800/ /1715/1925/1630/25/29/ 33, 25/29/33/34/25/29/33, 1530/1630/1725/1925, 1320/1520/1620/1715/ , 2250, 2350/2500, 2550, 2650, 2850/2950, 2900/3010/3300/3410, 3130/3430, 3250, 3450, 3650, 3830/4330/4630, 5030, 3240/3540/3940/4240/4740/5040/52 40/5740, 3600/3710/400/4310, 4610, 4700/4900/5400/ 5700, 5040/6040/7040, 8540/9540, 6800, 8200/9000, /29/33/34/25/29/33, 35/40/45 & with cab, 1720 w Ford oader, 345/445/545 &, 4835/5635/6635/7635, 3230/3430/3930/4630, 55/65/70/75, -35/40/45/2310/2410 w reinforcement kit, - 55/48/35/40/45 / Y 78 rices subject to change without notice. ll prices are in dollars.

65 , 1160, 1180, , 1180, , 4120/4320/4520/ 4720, 4500/4510/4600/ 4610/ 4700/4710,5025/ 5225/5325/ 5425/5525/ 5625, 5200/5210/5300/ 5310/5400/54102 w/ 520 loader, 5200/5210/5300/ 5310/ 5400/ w/520 loader, 5220/5320/5420/ ,4500/4510/4600/4610/4700/4710,5025/5225/53 25/5425/5525/5625,5200/5210/5300/5310/5400/540 2 w/520 loader, 5200/5210/5300/5310/5400/ w/520 loader, 5220/5320/5420/ /5210/5300/5310/5400/ w/520 loader, 5220/5320/5420/ , 2550, 2650, 2850/2950, 2900/3010/3300/3410, 3130/3430, 3250, 3450, 3650, 3830/4330/4630, 5030, 3 240/3540/3940/4240/4740/5040/5240 /5740, 3600/3710/400/4310, 4610, 4700/4900/5400/5700, 5040/ 6040/7040, 8540/9540, 6800, 8200/ /40/45 & with cab, 345/445/545 &, 4835/5635/6635/7635, 3230/3430/3930/4630, 55/65/70/75, -35/40/45/2310/ 2410 w reinforcement kit, - 55/48/35/40/ , 2650, 2850/2950, 2900/3010/3300/3410, 3250, 3450, 3650, 3830/4330/4630, 5030, 3240/3540/394 0/4240/4740/5040/5240/5740, 3600/3710/400/4310, 4610, 4700/4900/5400/5700, 5040/6040/ 7040, 8540/9540, 6800, 8200/ /40/45 & with cab, 345/445/545 &, 4835/5635/6635/7635, 3230/3430/3930/4630, 55/65/70/75 345/445/545 &, 4835/5635/6635/7635, 3230/3430/3930/4630, 55/65/70/75 / Y 79

66 365 (3-4- ) / Y pecifications ransport ransport eight (with boom fully retracted) 67" ransport idth (with stabilizers up) 45" round clearance 9.5" verall ength 76" oom pivot height 12" perating weight with 12" bucket 712 lbs. perational igging epth aximum 78" igging epth (2 ft.) Flat ottom 76" igging epth (8 ft.) Flat ottom verall operating height - fully raised 108" oading eight 55" oading each 46" each from swing post 108" ucket rotation 180º wing rc 180º tabilizer spread operating position 67" tabilizer down below grade 10" ystem relief valve setting 2,320 igging force - bucket cylinder 2,599 lbs. igging force - dipper cylinder 1,358 lbs. Full 180º swing rotation with equal power in both directions uilt from 10 gauge high-strength 100ksi steel to minimize weight and increase strength for durability ighback seat is adjustable vertically as well as forward and backwards wing speed control allows the operator to adjust swing speed Fits compact tool carriers and compact tractors with 3 or 4 point- at hitch. lso universal hitch for. 78 maximum digging depth 2,599 lbs max digging force Fold down stabilizers 8-18 buckets available uckets & apacities ucket truck ize eaped ap ft. 3 eight lbs. umber of eeth* 8" " " " " * uckets available without teeth 80 rices subject to change without notice. ll prices are in dollars.

67 365 (3-4- ) cont. 365 ydraulic it ote: ower return hoses included in 3-point mounting kit (order code: ) f mounting 4-point or kid-teer, order a ydraulic it to match your prime mover. Y,, Z,, Y. F - Z,, () odel 365 standard dirt pads included, 9 to $7, F ucket idth ( Q) () 8 standard (2 teeth) $ standard (3 teeth) $ standard (3 teeth) $ standard (4 teeth) $ standard (4 teeth) $ / ( Q) () ini ounting it for obcat 50/52/ $1, ini ounting it for itch itch $1, ini ounting it for ertz (oxer) 425, 427, 526, 425, $1, ini ounting it for ertz (oxer) 526X, 530X, 532X, and $1, ini ounting it for homas $1, ( Q) () 3 point mounting kit (ategory ) $ for category use order code (above) and the following: hitch pin (quantity 2) $19.99 clip (quantity 2) $ point mounting kit o to Fit p harts F 365 () rubber pad assembly (bolt on to grouser pads) $ ower ack $1, valve plug (closed center) $18.53 valve plug (power beyond) $18.53 / Y 81

68 490 Full 180º swing rotation with equal power in both directions uilt from 10 gauge high-strength 80ksi steel to minimize weight and increase strength for durability he highback seat is adjustable vertically as well as forward and backwards wing speed control allows the operator to adjust swing speed Fits compact tractors 110 maximum digging depth 3,895 lbs max digging force Fold down stabilizers / Y pecifications ransport ransport eight (with boom fully retracted) 109" ransport idth (with stabilizers up) 50" round clearance 15.5" verall ength 83" oom pivot height 18" perating weight with 12" bucket 1,100 lbs. perational igging epth aximum 110" igging epth (2 ft.) Flat ottom 108" igging epth (8 ft.) Flat ottom 88" verall operating height - fully raised 137.5" oading eight 92.8" oading each 59.1" each from swing post 145.8" ucket rotation 180º wing rc 180º tabilizer spread operating position 90" tabilizer down below grade 7" ystem relief valve setting 2,750 igging force - bucket cylinder 3,895 lbs. igging force - dipper cylinder 2,358 lbs buckets available uckets & apacities ucket truck ize eaped ap ft. 3 eight lbs. umber of eeth* 10" " " " " * uckets available without teeth 82 rices subject to change without notice. ll prices are in dollars.

69 490 cont. 490 ydraulic it ote: ower return hoses included in 3-point mounting kit (order code: ) f mounting 4-point or kid-teer, order a ydraulic it to match your prime mover. equires flow control when used on kid-teer loaders - call Y,, Z,, Y. F - Z,, () odel 490 standard dirt pads included, 9 to $9, F 490 ucket idth ( Q) () 12 standard (3 teeth) $ standard (4 teeth) $ standard (5 teeth) $ standard (5 teeth) $ standard (6 teeth) $1, ( Q) () 3 point mounting kit (category ) $ For category use order code (above) and the following: itch pin (quantity 2) $19.43 lip (quantity 2) $ point mounting kit o to Fit p harts F 490 () tandard eat $84.46 eluxe eat $ ower ack $1, uger mount assembly $ Valve plug (closed center) $18.53 Valve plug (power beyond) $18.53 ubber pad assembly (bolt on to grouser pads) $ Flow control kit necessary for 13 and greater $ djustable thumb kit (factory installed) $ djustable thumb kit (dealer installed) $ olt-n-tep $51.50 ackhoe mount space kits 2 spacer kit $ spacer kit $ / Y 83

70 500/600 he 509 has 116 max digging depth with 12 to 38 buckets he 511 is ideal for farming, light construction, and landscaping. t has 132 max digging depth with 12 to 38 buckets available. ptimum performance with 9 to 12 hydraulic systems he 611 has 132 max digging depth with 12 to 38 buckets available. rovides the best bucket digging force for a four bar linkage backhoe in its class pecifications ransport ransport eight (with boom fully retracted) 93" 106" 106" ransport idth (with stabilizers up) 60" 60" 57" round clearance 11" 11" 11" verall ength 91 93" 93" oom pivot height 16" 16" 16" perating weight with 12" bucket 1,425 lbs. 1,594 lbs. 1,930 lbs. perational igging epth aximum 116" 133" 133" igging epth (2 ft.) Flat ottom 115" 132" 132" igging epth (8 ft.) Flat ottom 99" 119" 119" verall operating height - fully raised 154" 173" 173" oading eight 82" 96" 96" oading each 50" 60" 60" each from swing post 153" 173" 173" ucket rotation 180º 180º 180º wing rc 180º 180º 180º traight wall digging depth 87" 98" 98" tabilizer spread operating position 95" 95" 119" tabilizer down below grade 16" 16" 17" ystem relief valve setting 2,500 2,500 2,750 igging force - bucket cylinder 5,676 lbs. 5,676 lbs. 6,200 lbs. igging force - dipper cylinder 2,754 lbs. 3,056 lbs. 4,350 lbs. uckets & apacities ucket ize truck ap. ft.3 eaped ap ft. 3 eight lbs. umber of teeth* 12" " " " " " " " / Y 84 rices subject to change without notice. ll prices are in dollars.

71 500/600 cont. efore ordering your backhoe, review general ordering information and go to Fit p harts on pages for backhoe sizes available for your specific kid-teer or tractor. 500/600 Y,, Z,, Y. ( F - Z ) () odel $11, odel $12, odel $13, F 500/600 ( Q) () ucket idth 12" bucket assembly $ " bucket assembly $ " bucket assembly $ " bucket assembly $1, " bucket assembly $1, " bucket assembly $1, " bucket assembly $1, " bucket assembly $1, Z F 500/600 Z ( Q) () For 509 and 511 backhoes grouser pads $ flat pads $ rubber pads $ flip-over pads $ For 611 ackhoes grouser pads $ flat pads $ rubber pads $ flip-over pads $ Y & Y ( F Q F Y ) : o to F and choose mounting kit required for your kid-teer or tractor. ost mounting kits are divided into two (2) sub-mounting kits (backhoe half and either kid-teer half or tractor half). n each case, one of each sub-mounting kit must be ordered. ost hydraulic kits (excluding hydraulic quick couplers) are included in the kid-teer mounts, but need to be added to tractor mountings. backhoes mount on units with cab enclosures and require standard ag tires unless noted otherwise. kid-teer loaders must be equipped with standard auxiliary hydraulics & lift arm locking kits. / Y 85

72 500/600 cont. () auger mount assembly $ #027 quick hitch coupler $1, hammer mount $ paint color option contact factory stabilizer cylinder guards $ step assembly (recommended with tractor mounts) $67.98 ealer installed one way hydro-electric aux flow kit (hammer valve kit) 509/ $3, ealer installed one way hydro-electric aux flow kit (hammer valve kit) $3, humbs do not work with 12, 16, 30 & 36 radco buckets and 12 & 24 buckets humb ssemblies Fixed humb ssemblies factory installed fixed thumb assembly $1, dealer installed fixed thumb assembly $1, ydraulic humb ssemblies (must order 2-way hydraulic auxiliary flow kit with remote quick couplers) factory installed hydraulic thumb assembly $1, dealer installed hydraulic thumb assembly $1, / Y onversion it hydraulic conversion kit from fixed thumb to hydraulic thumb (must order 2-way hydraulic auxiliary flow kit with remote quick couplers) $ ay ydraulic uxiliary Flow it with emote Quick ouplers factory installed 509 and $1, dealer installed 509 and $1, factory installed $1, dealer installed $1, Vertical tabilizer ssemblies (does not include pads - must order pads listed below) order in lieu of fold-out assembly (509 and 511) $ dealer field addition assembly (509 and 511) $2, order in lieu of fold-out assembly (611) $ dealer field addition assembly (611) $2, Vertical tabilizer ads grouser pads $ rubber pads $ rices subject to change without notice. ll prices are in dollars.

73 3000 (3-4- ) ual cylinder swing system with cushioned stop design provides maximum power rovides optimum performance with 9 to 12 hydraulic systems eplaceable steel bushings in all major pivot points tandard swing speeds control arge diameter boom and dipper cylinder with cushioned stop design pecifications ransport ransport eight (with boom fully retracted) 106" ransport idth (with stabilizers up) 60" round clearance 11" verall ength 93" oom pivot height 16" perating weight with 12" bucket 1,594 lbs. perational igging epth aximum 133" igging epth (2 ft.) Flat ottom 132" igging epth (8 ft.) Flat ottom 119" verall operating height - fully raised 173" oading eight 96" oading each 60" each from swing post 173" ucket rotation 180º wing rc 180º traight wall digging depth 98" tabilizer spread operating position 95" tabilizer down below grade 16" ystem relief valve setting 2,100 igging force - bucket cylinder 4,768 lbs. igging force - dipper cylinder 2,567 lbs. uckets & apacities ucket ize truck ap. ft.3 eaped ap ft. 3 eight lbs. umber of teeth* 12" " " " " " " " / Y 87

74 3000 (3-4- ) cont ( F - Z ) () ackhoe odel $12, F 3000 ( Q) () ucket width 12" bucket assembly $ " bucket assembly $ " bucket assembly $ " bucket assembly $1, " bucket assembly $1, " bucket assembly $1, " bucket assembly $1, " bucket assembly $1, Z F 3000 Z ( Q) () grouser pads $ flat pads $ rubber pads $ flip-over pads $ ( Q) () 3-oint ounting it $ Y,, Z,, Y. () auger mount assembly $ paint color option ontact Factory / Y humbs do not work with 12, 16, 30 & 36 radco buckets and 12 & 24 buckets humb ssemblies Fixed humb ssemblies factory installed fixed thumb assembly $1, dealer installed fixed thumb assembly $1, ydraulic humb ssemblies (must order 2-way hydraulic auxiliary flow kit with remote quick couplers) factory installed hydraulic thumb assembly $1, dealer installed hydraulic thumb assembly $1, X 88 rices subject to change without notice. ll prices are in dollars.

75 3000 (3-4- ) cont. cont. onversion its 3000 cont. hydraulic conversion kit from fixed thumb to hydraulic thumb (must order 2-way hydraulic auxiliary flow kit with remote quick couplers) () $ ay ydraulic uxiliary Flow it with emote Quick ouplers 9 or 11 ft - factory installed $1, or 11 ft - dealer installed $1, Y - Y Y Y, Y F F F - Z Y F. V -/X () V odels 4500/4520/ 4810 Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ V odel 70 Quick-ttach ounting it backhoe half quick-attach mounting kit $1, kid-teer half quick-attach mounting kit $ V odel 50/60 Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ V 85/100 - with hydraulic latch Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ V 70/80 - with hydraulic latch Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ erex 50/60 backhoe half mounting kit $2, kid-teer half mounting kit $ Y X / Y 89

76 Y - Y cont. Y Y, Y F F F - Z Y F. obcat odel 743 Quick ttach ounting it () backhoe half quick-attach mounting kit am-ock (includes hoses) $1, kid-teer half quick-attach mounting kit am-ock $ obcat odels 751 / 753 / 763 / 773 / 7753 / 130 Quick ttach ounting it backhoe half quick-attach mounting kit am-ock (includes hoses) $1, kid-teer half quick-attach mounting kit am-ock $ obcat odels 751 / 763 / 773 / 853 / 863 fits s existing kid-teer half mounting Quick ttach ounting it - this mounting kit will work with vertical lift machines backhoe half quick-attach mounting kit am-ock - no hoses $2, kid-teer half mounting kit for models $1, kid-teer half mounting kit for model $1, kid-teer half mounting kit for models $1, backhoe half quick-attach mounting kit am-ock (includes hoses) $1, obcat odel 773 / 185 / 175 / 190/ 190* Quick ttach ounting it backhoe half quick-attach mounting kit am-ock (includes hoses) $1, kid-teer half quick-attach mounting kit am-ock $ may include dvantage series or kid-teer model after 2000 / Y obcat odels 843 / 843 ** Quick ttach ounting it backhoe half quick-attach mounting kit am-ock (includes hoses) $1, ** will not interchange with mounting kits prior to January of 1997 (use backhoe half #80121 and kid-teer half #80122 at above prices) obcat odels 853 / 863 / 863 ** Quick ttach ounting it backhoe half quick-attach mounting kit am-ock (includes hoses) $1, kid-teer half quick-attach mounting kit am-ock $ ** will not interchange with mounting kits prior to January of 1997 (use backhoe half #80121 and kid-teer half #80122 at above prices) obcat odels 863 / 864 / 200 Quick ttach ounting it backhoe half quick-attach mounting kit am-ock (includes hoses) $1, kid-teer half quick-attach mounting kit am-ock $ obcat odels 873 / 873 Quick ttach ounting it backhoe half quick-attach mounting kit am-ock (includes hoses) $1, kid-teer half quick-attach mounting kit am-ock $ obcat eries 530/550/570/590 Quick ttach ounting it backhoe half mounting kit $2, kid-teer half mounting kit $ obcat odel 50 / 52 Quick ttach ounting it obcat 50/52 quick attach $ obcat odels 50 / 52 / 55 ini ounting it for radco 365 ackhoe 365 ackhoe mounting kit (complete) $1, Y X 90 rices subject to change without notice. ll prices are in dollars.

77 Y - Y cont. cont. Y Y, Y F F F - Z Y F. () obcat odel 150 / 160 / 180 with cab door Quick ttach ounting it backhoe half quick-attach mounting kit am-ock (includes hoses) $1, kid-teer half quick attach mounting kit am ock $ obcat odels 205 Quick ttach ounting it backhoe half $1, kid-teer half $ obcat odels 250 / 250 / 300 / 300 / 300 Quick ttach ounting it backhoe half quick-attach mounting kit am-ock (includes hoses) $1, kid-teer half quick-attach mounting kit am-ock $ obcat odels 650/770 Quick ttach ounting it backhoe half $ kid-teer half $2, () ase odels 1840 / 1838 / 1845 / 40X / 60X / 70X / 75X / 85X / 90X / 95X / 410 / 420 / 430 / 440 / 435 / 445 / 450 / 465 kid-teers * Quick ttach ounting it - ew ombo nits backhoe half (includes hoses) $1, kid-teer half for 1840 / $ kid-teer half for $ kid-teer half for 40X/ 60X/ 70X/ 410/ 420/ 430/ $ kid-teer half for 75X/ 85X/ 90X/ 95X/ 435/ 445/ 450/ $ kid-teer half for 410 / 420 / 430 / 440 / eries $ ase odels 150 / 130 loader Quick ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ *new combo mounting kits are not interchangeable with prior kits. ase odels V185 Quick ttach ounting it backhoe half mounting kit $2, kid-teer half mounting kit $ ase odels V380 / 270 / V300 / V250 / 250 / 220 / 200 loader Quick ttach ounting it backhoe half mounting kit $2, kid-teer half mounting kit $ / Y 91

78 Y - Y Y Y, Y F F F - Z Y F. : ab door on aterpillar kid-teer loaders cannot be used when backhoe is installed on unit. / Y () aterpillar odels 216 / 226 / 228 Quick-ttach ounting it backhoe half quick-attach mounting kit am-ock (includes hoses) $1, kid-teer half mounting kit $ kid-teer half mounting kit for kid-teers equipped with over-the-tire tracks $ aterpillar odels 232 / 236 / 242 / 246 / 248 / 252 / 262 / 267 Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ kid-teer half mounting kit for kid-teers equipped with over-the-tire tracks $ aterpillar odels 232 Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ aterpillar 2362 backhoe half mounting kit $1, kid-teer half mounting kit $ aterpillar odels 242 Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ aterpillar 246/256/262 backhoe half mounting kit $2, kid-teer half mounting kit $ aterpillar odels 247 / 257 Quick-ttach ounting it backhoe half quick-attach mounting kit am-ock includes hoses $1, kid-teer half mounting kit $ aterpillar odels 257 Quick-ttach ounting it backhoe mounting kit $1, kid-teer half mounting kit $ aterpillar odels 262 / 252 Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ aterpillar 2362 backhoe half mounting kit $1, kid-teer half mounting kit $ rices subject to change without notice. ll prices are in dollars.

79 Y - Y Y Y, Y F F F - Z Y F. () aewoo odels 1340 X / 1550 X / 2060 X / 602 / 702 / 902 / 430 / 440 / 460 / 470 Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit for model 1340 X / 602 / $ kid-teer half mounting kit for model 1550 X / 702 / $ aewoo odel 1760 / 450 / 802 Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ aewoo / oosan 2060X / 460 / 470 kid-teer half mounting kit $ () ehl odels 3635/3935/3640/4240 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odel 3825 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odels 4625/5625/6625 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odels 4640/5240/5640 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odel 5240 eries backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odels 5635/6635/6640 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odels 5640/6640 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odel 5640 Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ / Y 93

80 Y - Y cont. Y Y, Y F F F - Z Y F. () ehl odels 7600/7800 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odel 60 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odels 60/65 w/cab door backhoe half mounting kit $1, kid-teer half mounting kit omplete ehl odel 70 backhoe half mounting kit $2, kid-teer half mounting kit $ ehl odels 70/75 w/cab door backhoe half mounting kit $1, kid-teer half mounting kit $ / Y ehl odels 80/85 w/cab door backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odels 190 / ustang 1900 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odels 4635/4835 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odels 210 / ustang 2100 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odel V270 backhoe half mounting kit $1, kid-teer half mounting kit $ ehl odel V400 Quick ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ rices subject to change without notice. ll prices are in dollars.

81 Y - Y Y Y, Y F F F - Z Y F. Y () yundai odel 610 kid-teer half mounting kit $ yundai odels 610 / 710 / 810 Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ yundai odels & Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ J () J obots odels 160 / 170 / 190 / 190 / 1110 / 1110 Quick ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit for models 160 / $ kid-teer half mounting kit for models 190 / 190 / 1110 / $ J obots odels 165 / 185 / 1105 Quick ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit for model $ kid-teer half mounting kits for models 185 / $ J odels 220/260/280/300/330/225/260/300/320 Quick ttach ounting it backhoe half mounting kit $1, kid-steer half mounting kit $ J () John eere kid-teer odels 240 / 250 / 260* / 270* / 280 / 317 / 320 / 322 / 325 / 328 / 332 Quick ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kits for models 240 / 250 / 317 / 320 / $ kid-teer half mounting kits for models 260/270/280/325/328/ $ kid-teer half mounting kit for models 328/329/332, and $ * : for 260 / 270 models Y, manufactured in ennessee (early models) use kid-teer half kit #88135 John eere kid-teer odels backhoe half mounting kit $1, kid-teer half mounting kit $ John eere kid-teer odels backhoe half mounting kit $1, kid-teer half mounting kit $ Y X / Y 95

82 Y - Y Y Y, Y F F F - Z Y F. J cont. () John eere kid-teer odels 6675 / 7775 / 8875* Quick ttach ounting it - ew 1997 ombo its backhoe half mounting kit (includes hoses)* $1, kid-teer half mounting kit for 6675 / $ kid-teer half mounting kit for model $ * 1997 new combo mounting kits are interchangeable with these prior kits rior to 1997 mounts backhoe mounting half (includes hoses) $1, kid-teer mounting half 6675 / $ () ubota V75 kid-teer half mounting kit $ ubota V75/90 backhoe half mounting kit $1, / Y ubota V90 kid-steer half mounting kit $ () ew olland kid-teer odels 238 / 232 / 227 / 230 / 225 / 223 Quick ttach ounting it backhoe half mounting kit (includes hoses) $2, kid-teer half mounting kit $ ew olland kid-teer odels 215 / 213 Quick ttach ounting it backhoe half mounting kit (includes hoses) $1, kid-teer half mounting kit $ ew olland kid-teer odels 220 / 218 Quick ttach ounting it backhoe half mounting kit (includes hoses) $2, kid-teer half mounting kit $ ew olland kid-teer odels 215 / 213 Quick ttach ounting it backhoe half mounting kit (includes hoses) $1, kid-teer half mounting kit $ ew olland kid-teer odels 465 / X465 / X485 / 140 / 150 / 140. / 150. Quick ttach ounting it backhoe half mounting kit (includes hoses) $1, kid-teer half mounting kit $ Y X 96 rices subject to change without notice. ll prices are in dollars.

83 Y - Y cont. VV Y Y, Y F F F - Z Y F. () ew olland kid-teer odels 565 / X565 / X / X865 / X885- X985, 160 / 170 / 175 / 175 / 180 / 190 / 160. / 170. / 180. / 185. / 185 / 185 / 190 / 190. Quick ttach ounting it - ew 1997 ombo its backhoe half mounting kit (includes hoses)* $1, kid-teer half mounting kit X565/665/X665/160/170/160./ 170./175/175 or models $ /X865/X885/180/180./185./185/ $ models X985 / 190 / 190 / $ X665 / X885 *1997 new combo mounting kits are not interchangeable with these prior kits: kid-teer half mounting kit $ () akeuchi odel 10 Quick ttach ounting it am-ock backhoe half mounting kit $2, kid-teer half mounting kit $ akeuchi odel 120 / 220 Quick ttach ounting it am-ock backhoe half mounting kit (complete) (requires welding to kid-teer frame) $1, akeuchi odel 130 with new cab door / 230 Quick ttach ounting it am-ock backhoe half mounting kit (no kid-teer half mounting kit required) $1, akeuchi odel 140 / 240 Quick ttach ounting it am-ock backhoe half mounting kit $2, kid-teer half mounting kit $ akeuchi odel 150 / 250 Quick ttach ounting it am-ock backhoe half mounting kit $2, kid-teer half mounting kit $ () Volvo 60 / 70 backhoe half mounting kit $1, kid-teer half mounting kit $ Volvo 90 / 110 backhoe half mounting kit $1, kid-teer half mounting kit $ Volvo 110 / 115 / 125 / 135 / 155 backhoe half mounting kit $1, kid-teer half mounting kit $ / Y 97

84 Y Y Y Y, Y F F F - Z Y F. () ubota odels 5040 / 5240 / 5740 with cab Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit $1, Y / Y Y Y, Y F F F - Z Y Y F. () ase odels X25 / X29 / X33 with 16 loader Quick ttach ounting it 4-point backhoe half mounting kit $ backhoe half mounting kit $ tractor half mounting kit $1, hydraulic kit tractor pump $ ase odels X48 / X55 with 18 loader Quick ttach ounting it 4-point backhoe half mounting kit $ tractor half mounting kit $2, hydraulic kit tractor pump $ () aterpillar hallenger odels 265 & 275 backhoe half mounting kit $ backhoe half mounting kit $ tractor half mounting kit $1, aterpillar hallenger odels 285 & 295 (408, 509 & 511) backhoe half mounting kit $ tractor half mounting kit $1, hydraulic kit $ aterpillar odels 277 / 287 (available in rubber tracks only) Quick-ttach ounting it backhoe half mounting kit $1, kid-teer half mounting kit $ aterpillar odels 272 / 277 / 289 Quick-ttach ounting it complete mounting kit $1, Y X 98 rices subject to change without notice. ll prices are in dollars.

85 Y Y Y Y, Y F F F - Z Y F. cont. aterpillar hallenger models 265 / 275 / 285 Quick-ttach ounting it () backhoe half mounting kit (dealer must supply hydraulic kit) $ tractor half mounting kit (dealer must supply hydraulic kit) $1, backhoe half mounting kit $1, aterpillar hallenger odels 295 with 40 loader Quick-ttach ounting it backhoe half mounting kit- for extended mount $ hydraulic kit $ backhoe half mounting kit for 365 backhoe $ tractor half mounting kit $2, J John eere ractor odel 790 Quick ttach ounting it, 4-oint Quick ttach () backhoe half mounting kit $ tractor half mounting kit $1, backhoe half mounting kit $ John eere ractor odel 990 with 430 oader Quick ttach ounting it, 4-oint Quick ttach backhoe half 408 / $ tractor half $1, John eere ractor odel 2305 / 2505 Quick ttach ounting it, 4-oint Quick ttach backhoe half 365 only $1, tractor half $ John eere ractor odels 3120 / 3320 / 3520 / 3710 / 3720 / 4200 / 4210 / 4300 / 4310 / 4400 / 4410 equipped with John eere rear remote kit #V19534 Quick ttach ounting it, 4-oint Quick ttach backhoe half mounting kit for $ backhoe half mounting kit $1, tractor half mounting kit $1, John eere ractor odel 4120 / 4320 / 4520 / 4720 with 400X oader Quick ttach ounting it, 4-oint Quick ttach tractor half mounting kit $1, backhoe half 408 / $ John eere ractor odels 4500 / 4510 / 4600 / 4610 / 4700 / 4710 equipped with John eere remote kit #V19587 Quick ttach ounting it - 4-oint Quick ttach backhoe half mounting kit $ tractor half mounting kit $1, J Y X / Y 99

86 / Y Y Y Y Y, Y F F F - Z Y F. J cont. () John eere ractor odels 5025 / 5225 / 5325 / 5425 / 5525 / 5625 Quick ttach ounting it, 4-oint Quick ttach backhoe half mounting kit $ tractor half mounting kit - isolated platform $2, tractor half mounting kit cab or straddle platform $1, hose kit $ John eere ractor odels 5200 / 5210 / 5300 / 5310 / 5400 / 5410 with 520/540 oader Quick ttach ounting it, 4-oint Quick ttach backhoe half mounting kit $1, tractor half mounting kit $2, hydraulic hoses $64.89 : ealer is responsible for hydraulic hook up. f using J 3rd spool valve kit #V100024, there is no detent in valve as of this printing. John eere ractor odels 5220 / 5320 / 5420 / 5520 Quick ttach ounting it, 4-oint Quick ttach backhoe half mounting kit $ tractor half mounting kit - straddle platform or cab $1, tractor half mounting kit - isolated platform $2, hydraulic kit $ spacer kit (required on tractor with 3 remotes) $ () ubota odels V75/V90 backhoe half mounting kit $1, loader half V $ loader half V $ ubota odels 2050 / 2350 / 2500 with 450 loader - 4 Quick ttach ounting it, 4-oint backhoe half mounting kit- for internal tractor pump $ hydraulic kit-for internal tractor pump $ ubota odels 2250 / 2550 / 2650 / 2950 with F400 / 400 / 450 loader Quick ttach ounting it, 4-oint backhoe half mounting kit- for internal tractor pump $ hydraulic kit - for internal tractor pump $ ubota odels 2850 / 3250 / 3450 / 3650 with F500 / 650 loader Quick ttach ounting it, 4-oint backhoe half mounting kit- for internal tractor pump $ tractor half mounting kit $1, hydraulic kit - for internal tractor pump $ Y X rices subject to change without notice. ll prices are in dollars.

87 Y Y Y Y, Y F F F - Z Y F. cont. () ubota odels 2900 / 3300 / 3010 / 3410 with 480 or 481 loader / F / 4 Quick ttach ounting it, 4-oint backhoe half mounting kit- for internal tractor pump $ backhoe half mounting kit- for extended mount $ tractor half mounting kit (requires 32 between tires) $1, hydraulic kit for internal tractor pump $ spacer kit (required on tractor with 3 remotes) $ ubota odels 3130 / with 723 loader - with or without cab Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit $1, hydraulic kit power beyond $ ubota odels 3600 / 4200 / 3710 / 4310 with 680 / 681 or 682 loader / F / / 4 2 post - no cab Quick ttach ounting it, 4-oint backhoe half mounting kit- for internal tractor pump $ backhoe half mounting kit- for extended mount $ tractor half mounting kit (requires 32 between tires) $1, hydraulic kit for internal tractor pump $ spacer kit (required on tractor with 3 remotes) $ ubota odels 3830 / 4330 / 4630 with 723 / 853 loader - with or without cab Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit $1, hydraulic kit power beyond $ ubota odel with 852 loader Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit $1, ubota odel 5030 with 853 oader, with or without cab Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit $1, hydraulic kit power beyond $ ubota odels 2630 / 3030 with 403 loader no cab Quick ttach ounting it backhoe half mounting kit for $ tractor half mounting kit $1, hydraulic kit $ ubota odels 2630 / 3030 with cab & 403 loader Quick ttach ounting it backhoe half mounting kit with cab for $ tractor half $1, hydraulic kit $ Y X / Y 101

88 / Y Y Y Y Y, Y F F F - Z Y F. cont. () ubota odels 2800 / 3400 / 4400 with 513 or 463 loader Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit $1, hydraulic kit - for internal tractor pump $ ubota odels 3240 / 3540 with Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit $1, ubota odels 3240 / 3540 w/ backhoe half mounting kit $ tractor half mounting kit $1, ubota odels 3940 / 4240 / 4740 / 5040 / 5240 / 5740 with 514, 724, or 854 loader with 2 post / cab Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit with roll-over protection structure no hydraulic kit available, purchase rear remote hydraulic kit with detent through ubota # $1, tractor half mounting kit with cab 3940 / 4240 / 4740 Y no hydraulic kit available, purchase rear remote hydraulic kit with detent through ubota # $2, tractor half mounting kit with cab 5040 / 5240 / 5740 Y $1, ubota odels / 2910 with 402 loader-7500 / 7510 with 272 loader no cab Quick ttach ounting it, 4-oint backhoe half for $ tractor half mounting kit / $1, tractor half mounting kit / $1, hydraulic kit $ ubota odels 4700 / 4900 / 5400 / 5700 with 1001 loader / 2 post / F / 4 Quick ttach ounting it, 4-oint ote: 5700 will not fit units newer than 2003 backhoe half mounting kit $ tractor half mounting kit $1, hydraulic kit-power beyond $ ubota odels 5040 / 6040 / 7040 with 1153 loader or cab Quick ttach ounting it backhoe half mounting kit $ tractor half mounting kit for 1153 loader $2, tractor half mounting kit for models with cab $1, hydraulic kit power beyond $ ubota odel 6800 (no cab) with 1002 or 1162 loader - 2 post / F / 4 Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half $1, Y X rices subject to change without notice. ll prices are in dollars.

89 Y Y ubota odels 8200 / with or without cab Quick ttach ounting it, 4-oint Y Y, Y F F F - Z Y F. cont. () backhoe half mounting kit- auxiliary valve $1, tractor half mounting kit $1, ubota odels 8540 / 9540 with 1353 loader Quick ttach ounting it backhoe half mounting kit $ tractor half mounting kit $2, hydraulic kit power beyond $ Y-F assey-ferguson odels 1140 / 1145 / 1250 / 1260 Quick ttach ounting it, 4-oint () backhoe half mounting kit $ tractor half mounting kit $1, assey-ferguson odels 1160 / 1180 / 1190 with 232 loader / 4 - with or without turf tires / auxiliary hydraulics / Jodale erry cab - Quick ttach ounting it, 4-oint backhoe half mounting kit- for internal tractor pump $ hydraulic kit, internal tractor pump $ tractor half $1, assey-ferguson odels 1433V / 1440V with 1466 loader Quick ttach ounting it backhoe half mounting kit $ tractor half mounting kit $1, backhoe half mounting kit (365 backhoe) $1, assey-ferguson odels 1533 / 1544 with 1466 loader Quick ttach ounting it backhoe half mounting kit (408) $ tractor half mounting kit $1, hydraulic kit $ assey-ferguson odel 1560 backhoe half mounting kit $ tractor half mounting kit $1, () ew olland ractor odels 345 / 445 / 545 & with 745 loader & odels 445 / 545 & with 745 loader and 2 post Quick ttach ounting it, 4-oint backhoe half mounting kit $1, tractor half mounting kit $2, hydraulic kit selector valve (for 345/445/545 &) modification may be needed $1, Y X / Y 103

90 Y Y Y Y, Y F F F - Z Y F. cont. () ew olland ractor odels 445 / 545 with cab and valve Quick ttach ounting it, 4-oint backhoe half mounting kit- auxiliary valve $1, tractor half mounting kit $2, hydraulic kit modification may be needed $96.82 / Y ew olland ractor odels 1725 / 1925 / 1530 / 1630 / 25& / 29& / 33& & 34 standard with 7308 / 16 loader Quick ttach ounting it, 4-oint backhoe half mounting kit $ backhoe half mounting kit for $ tractor half mounting kit $1, hydraulic kit tractor pump $ ew olland ractor odels 3230 / 3430 / 3930 / with 7310 loader / standard or auxiliary valve / no cab 4 (2 requires Ford loader mount # ) Quick ttach ounting it, 4-oint backhoe half mounting kit- auxiliary valve $1, backhoe half mounting kit $1, tractor half mounting kit $2, hydraulic kit $96.82 ew olland ractor odels uper-teer 1630 / 25& / 29& / 33& with 7308 with 16 loader Quick ttach ounting it, 4-oint backhoe half mounting kit $ backhoe half mounting kit for $ hydraulic kit tractor pump $ tractor half $1, ew olland ractor odels uper-teer 1630 / 25& / 29& / 33& / 34 tandard w /7308 or 16 oaders tractor half mtg. kit or super steer tractors $1, : ew olland ractor odels 2410 / / 480 and 4030 must have rear remotes. o hydraulic kit part number. oses supplied in rder ode : Front end ballast weights required if not equipped with loader ew olland ractor odels 2410 / / 480 (with cab) with 18 loader Quick ttach ounting it, 4-oint backhoe half mounting kit- auxiliary valve $ tractor half mounting kit $2, tractor half mounting kit (without cab) $2, ew olland ractor odels 4030 Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit $1, Y X rices subject to change without notice. ll prices are in dollars.

91 Y Y cont. Y Y, Y F F F - Z Y F. () ew olland ractor odels 35 / 40 / 45 & with 250 loader with cab Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit $1, hydraulic kit $ hydraulic kit power beyond with jumper $ ew olland ractor odels 35 / 40 / 45 / 2310 with loader - standard or super steer Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit (includes reinforcement kit) $2, hydraulic kit $ ew olland ractor odels -55 / 48 / 2410 (no cab) with 18 loader Quick ttach ounting it, 4-oint backhoe half mounting kit $ tractor half mounting kit $2, hydraulic kit power beyond $ ew olland ractor odels 55 / 65 / 70 / 75 with 32 or 33 loader with or without cab / must have fold down s if without cab Quick ttach ounting it, 4-oint backhoe half mounting kit-includes power return & hoses $ tractor half mounting kit $2, ew olland ractor odels orkmaster 55 backhoe half mounting kit $ tractor half mounting kit $1, () akeuchi odel 26 / 130 Quick ttach ounting it am-ock backhoe half mounting kit $1, track loader half mounting kit-for $ track loader half mounting kit (for 130) $ / Y 105

92 / Y rices subject to change without notice. ll prices are in dollars.

93 /Y

94 /Y /Y ingle auxiliary hydraulic circuit ptional grapple with spill screen ptional bolt-on cutting edge pecifications odel eight (approx) idth eight epth eight F lbs 67.68" 56" arrier pecifications ift apacity perating eight <8,000 lbs. <22,000 lbs. /Y F :. Y. :, Y. / Y Y Y Y F () 62 ound tility ucket F $1, ound tility ucket F $1, ound tility ucket F $2, ound tility ucket F $2, Q () ale rapple F $2, eld-n ib it (required if purchasing olt-n rapple) F2502 $ Y Y ontact ustomer ervice at (800) V, 8, & F FF - ( 6, - ) () () For ucket F2560 (7 holes, 9 spacing) $ For ucket F2572 (7 holes, 11 spacing) $ For ucket F2584 (9 holes, 10 spacing) $ For ucket F2596 (9 holes, spacing) $ For ptional olt-n dge rill atterns (i.e. ase ole atterns) - all (800) rices subject to change without notice. ll prices are in dollars.

95 /Y - VY-Y /Y /Y - VY-Y F / :. () at / 1.75 cu yd $10, at / optional edge kit for cu yd, 12 holes $ J Q-fit $10, J (optional edge kit for above ) $ ew olland-versattach $10, /Y - VY-Y F :. () / 1.75 cu yd $10, at / optional edge kit for cu yd, 12 holes $ / Y 109

96 /Y - Q esigned to pick-up & transfer agriculture materials xcellent visibility through frame For round or square bale application arge heavy duty frame ncludes tapered forged tines () - Q F / () J Q-fit $2, / $2, ew olland - Versattach $2, Q F () / $2, John eere 544J w/j $3, / Y rices subject to change without notice. ll prices are in dollars.

97 F - 8 /Y esigned to pick-up & transfer agriculture materials xcellent visibility through frame For round or square bale application arge heavy duty frame F - 8 F / () Flat, 8 small bales $6, F - 8 F / () universal kid-teer style hitch for ag tractors $6, F - 8 F () J $6, andles (3) 4 square bales or (4) 2 square bales ooks made of high strength 1 abrasion resistant steel ingle auxiliary hydraulic circuit eplaceable hooks & tines Forged straight spear tines arge size is 85 wide by 96 high / Y 111

98 /Y rovides constant pressure that eliminates risk of dropped bales deal for 1,000 lb. silage bale, max. load of 2,400 lbs. an lift, move and stack round or rectangular bales arrier pecifications ift apacity perating eight <10,000 lbs. <32,000 lbs. : ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of pecifications odel idth pen eight epth eight (approx) F " 47" 54" 520 lbs F - : V.. Y F () ale ugger (clamps loads from 28 to 80 wide) F $3, Y Y ontact ustomer ervice at (800) F () : V.. Y F () ale ugger (clamps loads from 28 to 80 wide) F $3, / Y Y Y ontact ustomer ervice at (800) () rices subject to change without notice. ll prices are in dollars.

99 - /Y 4 to 5 ft opening arms holds wrapped round bales ingle cylinder allows arms to hug equally Fully assembled including hoses & couplers esigned with round tubing to prevent damage to wrapped bale coverings - F / () ssembly 6 ft $4, () at / $3, esigned to fit compact tractors up to 50 hp icks up one large round bale up to 6 in diameter (see weight limits below) vailable in single, dual, and triple spears ale pear pecifications odel eight (approx) idth eight epth ound ale apacity ain pear tabilizer pear ingle 145 lbs (1) 1.75 x 49 (2) 1 x ual 155 lbs (2) 1.75 x ingle 195 lbs (1) x 53 (2) 1 x ual 235 lbs (2) x 53 (1) 1 x triple 230 lbs (3) 1.75 x lbs (1) x 53 (2) 1 x 19 - F - Y () ingle ale pear (2000 lb. maximum bale size) $ ual ale pear (3000 lb. maximum bale size) $ ingle eavy uty ale pear (3000 lb. maximum bale size) $ ual eavy uty ale pear(4000 lb. maximum bale size) $ riple pear (4000 lb. maximum bale size) $1, oint itch (3000 lb. maximum bale size) $ X / Y 113

100 /Y - cont. - F cont. - Y Y ontact ustomer ervice at (800) () () ale pear, 53 x 55mm, eavy uty fits 11910, 11920, and $ ale pear, 45mm x 1250mm, cross bolts fits 17200, 17212, $ () mall pike (1 x 19 ) $20.50 arge pike w/ut (1-3/4 x 41 ) $ Q Various mounts available eplaceable tines - Q F / () at / $1, Q F () at / $1, J 416 eries quick attach $2, QZ / Y ingle auxiliary hydraulic circuit oad check for positive holding lock wo long arms with unique design to allow full contact with bales () J Q-fit ew olland-versattach $13, rices subject to change without notice. ll prices are in dollars.

101

102 - deal for moving trees for transplanting se to load and unload attachments, etc. deal for placing & removing concrete forms dds 6.5 feet of reach to your loader oes not include chains or clevis : ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of X arrier pecifications ift apacity perating eight <10,000 lbs. <32,000 lbs. pecifications eight oad odel idth epth eight each (approx) epth F lbs aximum oads hat an e afely ifted Vertical ast 70% of operating load not to exceed 6,000 lbs ax. each 30% of operating load not to exceed 6,000 lbs - F - : V. Y F () oader oom F $1, Y Y () ontact ustomer ervice at (800) rices subject to change without notice. ll prices are in dollars.

103 - (F ) Fully welded square tube design intle hook with safety latch on front plate Quick attach mounting system for optimal safety & ease of operation deal for landscapers & nurseries X - F () at 902/906/908 (8,000 design rating) $1, available 2,000 lb rating reat for contractors, utilities, & construction site, as well as rental industry 12 russ oom w/ydraulic inch (2,000 b. ating) () at / $9, J Q-fit $9, ull $9, kyrak $9,

104 - (J) djusts to 8,11, & 13 oad ratings: 8 is 4,000 lbs, 11 is 3,000 lbs, & 13 is 2,000 lb intle hook with safety latch on front plate xcellent for all contractors - (J) F / X () at 416/420 pin mount adjustable truss boom $4, (J) F () at 38/ $4, at 14/24/ $4, J 411/416 & Volvo $4, J 416 Q $4, ew olland adj truss boom $4, Q Fully welded square tube design Quick attach mounting system standard intle hook with safety latch on front plate esigned for telehandlers with quick attach 12 /Q (2,000. ) () at / $2, J 506/ $2, J long $2, ull $2, anitou $2, ew olland - Versattach $2, kyrak $2, erex $2, rices subject to change without notice. ll prices are in dollars.

105 - Q cont. - Q F cont. 12 /Q () ase $2, ehl ynattach $2, ehl ynacarrier $2, radall 534/544 quick attach $2, radall quick attach, 1400 lb cap $2, ngersoll and V $2, ngersoll and V642 pre ,400 lb $2, J eries quick attach, 1400 lb cap $2, /Q (2,000. ) () at / 1,400 lb cap $2, Q F / 12 /Q (2,000. ) () at / $2, X 119

106 - Y 4,000 lb design on 3 & 2,000 lb design on 12 models ncludes 65 of 7/16 wire rope cable ulsa winch with oil cooled brake & roller bearing swivel hook with latch X 3 /Y (4,000. ) () ase $9, at / $9, ngersoll and V 843/1044/ $9, J Q-fit $9, J $9, J 520 hitch $9, ull $9, ull 1044 flapper mount $9, anitou $9, kyrak $9, erex quick attach $9, Y F 3 /Y (4,000. ) () Volvo $9, rices subject to change without notice. ll prices are in dollars.

107 X X Fine-grades, backfills, excavates, rips and scarifies ydraulically actuated scarifier increases ripping penetration esigned for 3-point mount pecifications odel arrier pecifications utting idth ift apacity perating eight eavy uty <10,000 lbs. <32,000 lbs. eight epth apacity eight (approx) yd 3 1,565 lbs yd 3 1,676 lbs X F : ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of : X 3. Y V Y - 3. X X Y F () 84 odel 240 ox craper $5, odel 440 ox craper with replaceable end plates $5, hank/ooth ssembly ox craper comes with ategory - 3 point mount only - () () ipper hank & ooth ssembly $51.45 nd lates (for 13888) olt-n nd late (eft and) $ olt-n nd late (ight and) $ eplaceable dge (Front and ear) - tandard uty 84 eavy-uty eplaceable dge F / eplaceable dge (Front and ear) - eavy uty 84 eavy-uty eplaceable dge $ : hipping weights vary depending on loader mounting and packaging. 121

108 X 01m 02m 03m 05m 08m 12m 15m 100 <13' 13'-17' >17' F250 F250, F350, F X17, X , VX F250, F350, F500, F750 26**, 32, 32i, 35, 35i "X31, X36,X26**, X33, X **, 302.7**, 303, F350, F500, F750, F X55, X57, X60 304, 304.5, 305, X60-3, X63-3 F750, F , 580, 580, 590, F2, 416F2, 420F2, 430F2 F750, F1000, F1500 X75, X80 F1000, F , F X85-3 Z17 Z25**, Z35 Z45, Z55 Z80 ZX17-5 ZX26-5**, ZX35-5 ZX50-5, ZX Z-9 25Z-9**, 35Z , VX, 17VX 18J JX**, 25J**, 25VX**, 28J**,30JX, 30V, 35J, 35VX 8029**, 8035, 8040, 1X, X, 2X, 3X- 40VX, 45V, 55, 55VX, 55J, 60V 65VX 8045, 8052, **, 35 50, 60 3X, 4X, 1400, 1500, , 310, 315, 410 ZX75-5, ZX , VX, 85V J70, 85Z, 86, 90Z, **, 35 55X 75, **, , X018-4, X41-3V, 17 X71-3**, X033-4, 25**, 35-4, 21, 26, 39, 45 47, 48, 420 X040-4, X057-4, X121-3, , , , X- 17, 4X , * 78-10, X080-4 X X3, X3, 80 F1500, F2 X130, X130, X135, X F, 312, 313F, 314, 315F X140-3, X140-5 F2, F3 X160, X , 316 X160, X180, X190, X190-5 ZX120-3, ZX130-6, ZX160-6 ZX135-5" 125-9, , , 180-9, X160, X180 X140, X145 J145, JZ , 130, , 130, 135, 140, , X3, 130 X4, 135, 145 X3 J , 170, , X3, 160 X , Z 250Z**, 350Z 450Z, 550Z 800Z 17, 18 26**, 27**, 30, 33, 35, 37 55X, 57, 60 95, Y16 Y35 Y75 Y135* 016, **, 230, 235, 138F, , 153F, F, F 1140, , 160, 175 X/ 10 "16, 19, 20 25**, 29 37, 48 50, 60 75, 70, , , V08 20 Z17, 20, 1404 Vi17 25**, 35 38, 40 Z28**, Z38, 3503 Vi25**, Vi35 55, 58, 60 60, 70 85, 88 Z53, 6003, 65 Vi45, Vi , 90 Vi80, V100 V08 Vi17 Vi25**, Vi35 Vi45, Vi55 Vi80, V , X150 X , 160, rices subject to change without notice. ll prices are in dollars.

109 20m 25m 27m 35m 45m 60m 80m 100m F3, F4, 5 F4, F5 F5, F6 F6, F8, F10 F10, F12 F12 X210, X225 X235 X240, X250 X290*, X300* X350 X470, X490 X700 X , 319, 320F, 321, 323F, F*, 328*, 329F* 335F* 330, 336F 345, 349F, 352F 365, 374F 385, 390F X210, X225-3 X235-3, X255-5 X300-5* X340, X350-5 ZX180-5, ZX190-5, ZX210-6, ZX225 ZX220, ZX , 220-9, X220, X235 X420, X450-5 X470, X490, X520 X530-5 ZX250-6 ZX290-5*, ZX300-6* ZX350-6, ZX380-6 ZX470-6 ZX670-5 ZX870-5 X , X *, 300-9* 305, X300* 370, 380-9, X330, 320, , X , , 520-9, X480, X520 J190, J220 J260 J290* J330, J360 J , 190, 210, 225, , 240, *, 300* 350, X 230, 240, *, 300*, 350, 380, , , 215-2, , *, 295* 300* , , , * , 350-1, , 906, 914, , , X3, 210 X4, 225, 235 X3, 245 X , 946, , , , , , X2, 250 X4 290 X2*, 300 X4* 330, 350 X4 460, 470 X3, 490 X4 700 X2 800 X , 200, 220, * Y215 Y235 Y335 Y , 210, 220, *, 305* 350, 360, , X/ X210 X250 X360 X

110 F aladin trikeforce tandard Features nclude: 2 ool its 1 eal it urable and reliable construction with only two moving parts roven working principle 2 year warranty on material and workmanship Full breaker product line to suit multiple applications and tasks Full offering of daptor hardware to fit most machines aladin reakers offer fully shock isolated and noise reduced product as standard (F1500-F12 models) Field replaceable lower bushing, also rotatable for extra wear F X tem nit F250 F350 orking eight (lb) mpact nergy lass (ft.lb) *mpact ate ()* ow peed - - igh peed perate ressure elief ressure il Flow ange gal/min ool iameter inch ressure ine ize mm (inch) 12 (1/2) 12 (1/2) eturn ine ize mm (inch) 12 (1/2) 12 (1/2) *arrier eight lb rices subject to change without notice. ll prices are in dollars.

111 F tem nit F500 F750 F1000 F1500 orking eight (lb) mpact nergy lass (ft.lb) *mpact ate ()* ow peed igh peed perate ressure elief ressure il Flow ange gal/min ool iameter inch ressure ine ize mm (inch) 19 (3/4) 19 (3/4) 12 (1/2) 19 (3/4) eturn ine ize mm (inch) 19 (3/4) 19 (3/4) 12 (1/2) 19 (3/4) *arrier eight lb X F Y tem nit F2 F3 F4 F5 orking eight (lb) mpact nergy lass (ft.lb) *mpact ate ()* ow peed igh peed perate ressure elief ressure il Flow ange gal/min ool iameter inch ressure ine ize mm (inch) 19 (3/4) 25 (1) 25 (1) 25 (1) eturn ine ize mm (inch) 19 (3/4) 25 (1) 25 (1) 25 (1) *arrier eight lb

112 F VY Y X tem nit F6 F8 F10 F12 orking eight (lb) mpact nergy lass (ft.lb) *mpact ate ()* ow peed igh peed perate ressure elief ressure il Flow ange gal/min ool iameter inch ressure ine ize mm (inch) 25 (1) 32 (1 1/4) 32 (1 1/4) 32 (1 1/4) eturn ine ize mm (inch) 25 (1) 32 (1 1/4) 32 (1 1/4) 32 (1 1/4) *arrier eight lb achine to reaker eneral ecommendation: he following refernce information is provided as a general guide to assist in aligning aladin reakers with machines. his is a guide only and all installations must be confirmed to be safe and suitable for the customer's specific application rices subject to change without notice. ll prices are in dollars.

113 F he ompact family of aladin trikeforce F breakers provide the optimal combination of breaker power and frequency () for the jobs faced by todays mini kid teer and xcavator machines. hese products pack the punch necessary to break most concrete up to 8 inches thick, and can be used in confined spaces where larger breaker products cannot reach. he breaker operating weight and :, 2, X. center of gravity keep the machine stable, and in control, for safe operation in stable worksites. he ompact F line is supported with tools to match application, as well as operator preference, and can be mounted to machines using a series of adaptor brackets that cover the majority of machines in your market. he ompact F's are powerful additions to your toolbox. reakers atalog umber escription eight (lbs) ist rice F ompact breaker for use on mini, ini-x. 298 $4, F ompact breaker for use on mini, ini-x. 414 $5, atalog umber ini kid-teer mount ini kid-teer mount he following accessories can be ordered with your breaker to customize for machine or operational application. escription F250 ccessories ini kid-teer mount - adapts the F250 breaker to most carriers of this type except for obcat machines ini kid-teer mount - adapts the F250 breaker to obcat 50/52/55 ini- machines eight (lbs) ist rice 105 $ $ X ounting ap dapts the F250 reaker to a 027 interface using a bolt on top cap. 78 $ ubota X J 8018 dapts the F250 reaker to the ubota X018-4 using a bolt on top cap. ins are not included. dapts the F250 reaker to the J 8018 using a bolt on top cap. ins are not included. 40 $ $ F 250 in-on ount 40 $ F250 in and bushing it 43 $ ini lass in it 43 $ ini lass in it 43 $ F350 ccessories atalog umber escription eight (lbs) ist rice ini kid-teer mount ini kid-teer mount he following accessories can be ordered with your breaker to customize for machine or operational application. ini kid-teer mount - adapts the F350 breaker to most carriers of this type except for obcat machines ini kid-teer mount - adapts the F350 breaker to obcat 50/52/55 ini- machines 124 $ $ F 350 in-on ount 40 $ F350 in and ushing it 43 $

114 F cont. X atalog umber ool - hisel ool - onical ool - oil F250 ptional dd-ons (not required for initial installation) atalog umber escription eight (lbs) ist rice ool - hisel referred for general operation to give good results in most applications where penetration is important. 10 $ ool - onical referred for general operation to give good results in most applications where penetration is important. 10 $ ool - oil referred for general operation to give good results in most applications where penetration is important. 10 $ ool - lunt sed in applications where penetration is not preferred. 10 $80.00 F350 ptional dd-ons (not required for initial installation) escription referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 22 $ $ $ ool - lunt sed in applications where penetration is not preferred. 23 $ F he aladin trikeforce eneral urpose breakers provide cost effective options, and a flexible mounting system allowing installation onto multiple types of machines. hese breakers are typically tasked with doing general activities in road construction, utility installation, light demolition, site preparation, and building construction. hese are truly versatile tools that add value to any contractor's tool box. aladin offers a complete array of mounting systems to leverage the adaptability of these tools allowing for switching between ini-xcavators, kid teer and ompact oaders, as well as ackhoe oaders - all machines that are found on the typical worksite. hese tools offer the most value in the industry and are backed by the strength of the aladin organization and product support. :, 2 ( F F750, F F1000 V), X. atalog umber escription reakers eight (lbs) ist rice F eneral uty breaker for use on, ini-x and small ackhoe oaders. 637 $6, F eneral uty breaker for use on, ini-x and small ackhoe oaders. 747 $7, F eneral uty breaker for use on ini-x and ackhoe oaders. 959 $11, F eneral uty breaker for use on ini-x and ackhoe oaders $12, rices subject to change without notice. ll prices are in dollars.

115 F cont. atalog umber to interface bracket 030 to interface bracket 027 ounting ap 030 ounting ap obcat Xhange ounting ap ounting ap for ubota 9930 he following mounting accessories can be ordered with your breaker to customize for machine. F500 ccessories escription nstalls and 027 interface system ready tool on to a standard mounting interface. ot installed. nstalls and 030 interface system ready tool on to a standard mounting interface. ot installed. dapts the F500/750 breaker to a 027 interface using a bolt on top cap. ot installed. dapts the F500/750 breaker to a 030 interface using a bolt on top cap. ot installed. dapts the F500/750 breaker to a obcat Xchange mounting system. ot installed. eight (lbs) ist rice 329 $1, $1, $1, $1, $1, dapts F500/750 to the ubota 9930 ounting ystem 86 $1, F 500/750 in-on ount 83 $1, F500 in and bushing it 43 $ ini lass in it 43 $ ini lass in it 43 $ X he following mounting accessories can be ordered with your breaker to customize for machine. f your machine is not listed here please ask you aladin ales support team to help you. atalog umber to interface bracket 030 to interface bracket 027 ounting ap 030 ounting ap obcat Xhange ounting ap ounting ap for ubota 9930 F750 ccessories escription nstalls and 027 interface system ready tool on to a standard mounting interface. ot installed. nstalls and 030 interface system ready tool on to a standard mounting interface. ot installed. dapts the F500/750 breaker to a 027 interface using a bolt on top cap. ot installed. dapts the F500/750 breaker to a 030 interface using a bolt on top cap. ot installed. dapts the F500/750 breaker to a obcat Xchange mounting system. ot installed. eight (lbs) ist rice 329 $1, $1, $1, $1, $1, dapts F500/750 to the ubota 9930 ounting ystem 86 $1, F 500/750 in-on ount 83 $1, F750 in and bushing it 43 $ ini lass in it 43 $ ini lass in it 43 $

116 F cont. atalog umber he following mounting accessories can be ordered with your breaker to customize for machine. f your machine is not listed here please ask you aladin ales support team to help you. F1000 & 1500 ccessories escription eight (lbs) ist rice Quick itch ount ounting ystem (not installed) provides all hardware for installation of the F1000 onto a 030 Quick ttach system 146 $1, ounting ap for Yanmar Vi080 ounting ystem (not installed) provides all hardware for installation of the F1000/F1500 reakers onto a Yanmar Vi080 machine 164 $1, X atalog umber ounting ap for ase X80 ounting ap for ubota 740 ounting ap for ubotax057 ounting ap for ase 580/590 ounting ystem (not installed) provides all hardware for installation of the F1000/F1500 reakers onto a ase X80 machine ounting ystem (not installed) provides all hardware for installation of the F1000/F1500 reakers onto a ubota 740 machine ounting ystem (not installed) provides all hardware for installation of the F1000/F1500 reakers onto a ubota X057 machine ounting ystem (not installed) provides all hardware for installation of the F1000/F1500 reakers onto a ase 580/590 machine escription F500 undles 143 $1, $1, $1, $1, eight (lbs) ist rice wo osition Frame ncludes F500 reaker ackage plus 2- position mounting bracket ready to install onto a standard - machine $7, ounting system F500 /027 ombo system 030 ounting system F500 /030 ombo system Xhange ounting system ncludes the F500 reaker and a 027 interface adaptor system (not installed) for installation onto a 027 capable machine. ncludes the F500 reaker, a 027 interface adaptor system (not installed), and 027 bracket for installation onto a ncludes the F500 reaker and a 030 interface adaptor system (not installed) for installation onto a 030 capable machine. ncludes the F500 reaker, a 030 interface adaptor system (not installed), and 030 bracket for installation onto a ncludes the F500 reaker and a Xhange interface adaptor system (not installed) for installation onto a Xhange capable machine. 740 $7, $8, $7, $8, $7, F500 /Xhange ombo system ncludes the F500 reaker, Xhange interface adaptor system (not installed), and an Xhange bracket 1153 $9, F500 for ubota 9930 install F 500 for ubota 9930 to install ncludes the F500 reaker and a ubota 9930 interface adaptor system (not intalled) for installation onto a 9930 capable machine. ncludes the F500 reaker, a 9930 interface adaptor system (not installed), and an 9930 interface ready bracket 722 $7, $8, rices subject to change without notice. ll prices are in dollars.

117 F cont. atalog umber wo osition Frame escription F750 undles ncludes F750 reaker ackage plus 2- position mounting bracket ready to install onto a standard - machine. eight (lbs) ist rice 1102 $9, ounting system ncludes the F750 reaker and a 027 interface adaptor system (not installed) for installation onto a 027 capable machine. 850 $8, F750 /027 ombo system 030 ounting system F750 /030 ombo system ncludes the F750 reaker, a 027 interface adaptor system (not installed), and 027 bracket for installation onto a ncludes the F750 reaker and a 030 interface adaptor system (not installed) for installation onto a 030 capable machine. ncludes the F750 reaker, a 030 interface adaptor system (not installed), and 030 bracket for installation onto a 1190 $9, $8, $10, X Xhange ounting system F750 /obcat Xhange ombo system F500 for ubota 9930 install F 500 for ubota 9930 to install ncludes the F750 reaker and a Xhange interface adaptor system (not installed) for installation onto a Xhange capable machine. ncludes the F750 reaker, a hange interface adaptor system (not installed), and an hange bracket ncludes the F750 reaker and a ubota 9930 interface adaptor system (not intalled) for installation onto a 9930 capable machine. ncludes the F750 reaker, a 9930 interface adaptor system (not installed), and an 9930 interface ready bracket 866 $9, $10, $8, $10, atalog umber ool - hisel* ool - onical* ool - oil F500 ptional dd-ons escription referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 34 $ $ $ ool - lunt sed in applications where penetration is not preferred. 34 $ otes: *ost requested tools for this breaker model. 131

118 F cont. atalog umber ool - hisel* F750 ptional dd-ons escription referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 38 $ ool - onical* referred for general operation to give good results in most applications where penetration is important. 38 $ X ool - oil referred for general operation to give good results in most applications where penetration is important. 38 $ ool - lunt sed in applications where penetration is not preferred. 38 $ otes: *ost requested tools for this breaker model. atalog umber ool - hisel* ool - onical* ool - oil F1000 ptional dd-ons escription referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 55 $ $ $ ool - lunt sed in applications where penetration is not preferred. 55 $ otes: *ost requested tools for this breaker model. atalog umber ool - hisel* F1500 ptional dd-ons escription referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 78 $ ool - onical* referred for general operation to give good results in most applications where penetration is important. 78 $ ool - oil referred for general operation to give good results in most applications where penetration is important. 78 $ ool - lunt sed in applications where penetration is not preferred. 78 $ otes: *ost requested tools for this breaker model rices subject to change without notice. ll prices are in dollars.

119 F Y he aladin trikeforce edium breakers give the contractor a range of demolition and construction tools to address tasks commonly found on the jobsite. hese tools combine power and blow rate to deliver optimum breaking performance in tasks such as utility trenching or site preparation. he aladin edium series of breakers allow for easy transport from site to site to give the contractor maximum flexibility in using this investment. hese breakers have fully adjustable working cycles to allow the operator to "fit" the breaker to the task at hand. ith a simple but powerful operating cycle these products give leading reliability and the lowest wning and perating costs in the industry. he aladin edium breaker series comes standard with shock isolation and noise abatement to keep the operation comfortable and prevent damage to the host machine, as well as a breaker mounted lubrication system to protect the breaker. ombine these with the power of the aladin rands organization and you have a winning team that will keep you up and running during the toughest of times. :, 2, X. F2 F3 F4 F5 reakers atalog umber escription eight (lbs) ist rice edium uty breaker for use on small to medium weight excavators. ncludes F2 breaker, auto-lube pump (installed), and rease ube $22, edium uty breaker for use on small to medium weight excavators. ncludes F3 breaker, auto-lube pump (installed), and rease ube $30, edium uty breaker for use on small to medium weight excavators. ncludes F4 breaker, auto-lube pump (installed), and rease ube $35, edium uty breaker for use on small to medium weight excavators. ncludes F5 breaker, auto-lube pump (installed), and rease ube $40, he following accessories can be ordered with your breaker to customize for machine or operational application. f a mounting bracket is not referenced for your machine please consult with your aladin sales team for the exact match, price and timeline. aladin offers the industries largest bracket offerring to support our breakers. X F2 ccessories atalog umber ounting ap for F2 and omatsu 138 ounting ap for a F2 and obelco 170 ounting ap for F2 and J135 escription ounting ystem (not installed) provides all hardware for installation of the F2 reaker onto a omatsu 138 machine ounting ystem (not installed) provides all hardware for installation of the F2 reaker onto a obelco 170 machine ounting ystem (not installed) provides all hardware for installation of the F2 reaker onto a J135 machine eight (lbs) ist rice 299 $ $ $ F2 ount F2 $ in it lass 25 achine $ in it lass 35 achine $ ounting racket ase ounting racket ase late. ncludes the mounting bolt pattern for the breaker and is intended for use when fabricating brackets. ote: one each of these is included with each edium breaker purchase. $

120 F Y cont atalog umber ounting ap for omatsu 228 he following accessories can be ordered with your breaker to customize for machine or operational application. F3, F4, F5 ccessories escription ounting racket (not installed) for installation of the F3/F4/F5 reaker onto a omatsu 228 machine. ins not included. eight (lbs) ist rice 481 $1, ounting ap for -ink ounting racket (not installed) for installation of the F3/F4/F5 reaker onto a -ink machine. ins not included. $1, X ounting ap for obelco 210 ounting ap for J 180/ ounting racket ase F3/F4/F5 ount ounting racket (not installed) for installation of the F3/F4/F5 reaker onto a obelco 210 machine. ins not included. ounting racket (not installed) for installation of the F3/F4/F5 reaker onto a J 180/210 machine. ins not included. ounting racket ase late. ncludes the mounting bolt pattern for the breaker and is intended for use when fabricating brackets. ote: one each of these is included with each edium breaker purchase. $1, $1, $ F3/F4/F5 $1, in it lass 35 achine $ in it lass 45 achine $ in it lass 55/60 achine $ F2 ptional dd-ons atalog umber ool - hisel* ool - onical* ool - oil escription referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 109 $ $ $ ool - lunt sed in applications where penetration is not preferred. 109 $ otes: * ost requested tools for this breaker model. atalog umber ool - hisel* ool - onical* ool - oil escription F3 ptional dd-ons referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 198 $ $ $ ool - lunt sed in applications where penetration is not preferred. 209 $ otes: *ost requested tools for this breaker model rices subject to change without notice. ll prices are in dollars.

121 F Y cont. atalog umber ool - hisel* escription F4 ptional dd-ons referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 268 $1, ool - onical referred for general operation to give good results in most applications where penetration is important. 266 $1, ool - oil referred for general operation to give good results in most applications where penetration is important. 253 $1, ool - lunt* sed in applications where penetration is not preferred. 282 $ otes: *ost requested tools for this breaker model. atalog umber ool - hisel* ool - onical ool - oil escription F5 ptional dd-ons referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 310 $1, $1, $1, X ool - lunt* sed in applications where penetration is not preferred. 310 $1, otes: *ost requested tools for this breaker model. atalog umber uto-ube ump ystem F2-F10 ptional dd-ons escription eight (lbs) ist rice ubrication system that is mounted on the breaker for maximum flexibility. ll hardware is included. o hydraulic connection is needed, one grease line connection is required. F2-F12 ptional dd-ons $1, atalog umber escription eight (lbs) ist rice reaker rease F X F: eavy uty 2 rade grease specially formulated for high temperature breaker operation to protect key parts such as tool bushings and extend the breakers life. For use with aladin reaker ubrication ump on models F2, F3, F4, F5, F6, F8,F10, F12 $

122 F VY Y he aladin trikeforce eavy breakers give the punch needed to break through the toughest obstacle. hese breakers combine the power needed for heavy rock breaking and the speed needed for demolition and general construction work. hese breakers have fully adjustable working cycles to allow the operator to "fit" the breaker to the task at hand. ith a simple but powerful operating cycle these products give leading reliability and the lowest wning and perating costs in the industry. he aladin arge breaker series comes standard with shock isolation and noise abatement to keep the operation comfortable and to prevent damage to the host machine. ombine this with the power of the aladin rands organization and you have a winning team that will keep you up and running during the toughest of times. :, 2, X. X F6 F8 F10 F12 atalog umber escription reakers eavy duty reaker for use in heavy demolition, aggregate, trenching and heavy consecution tasks. ncludes F6 breaker, auto-lube pump (installed), and rease ube. eavy duty reaker for use in heavy demolition, aggregate, trenching and heavy construction tasks. ncludes F8 breaker, auto-lube pump (installed),and rease ube. eavy duty reaker for use in heavy demolition, aggregate, trenching and heavy construction tasks. ncludes F10 breaker, auto-lube pump (installed), and rease ube. eavy duty reaker for use in heavy demolition, aggregate, trenching and heavy construction tasks. ncludes F12 breaker, auto-lube pump (installed), and rease ube. eight (lbs) ist rice 6490 $52, $65, $73, $97, he following accessories can be ordered with your breaker to customize for machine or operational application. f a mounting bracket is not referenced for your machine please consult with your aladin sales team for the exact match, price and timeline. aladin offers the industries largest bracket offering to support our breakers. atalog umber ounting ap for omatsu ounting ap for 336 F6, 8 ccessories escription ounting ystem (not installed) provides all hardware for installation of the F6 or F8 reaker onto a omatsu 360 machine ounting ystem (not installed) provides all hardware for installation of the F6 or F8 reaker onto a 336 machine eight (lbs) ist rice 685 $3, $3, ounting ap for J 250 F6/F8 ount op late ounting ystem (not installed) provides all hardware for installation of the F6 or F8 reaker onto a J 250 machine 621 $3, F6/F8 $2, ounting racket ase late. ncludes the mounting bolt pattern for the breaker and is intended for use when fabricating brackets. ote: one each of these is included with each edium breaker purchase. $ in it lass 55/60 achine $ in it lass 70 achine $ rices subject to change without notice. ll prices are in dollars.

123 F VY Y cont. atalog umber he following accessories can be ordered with your breaker to customize for machine or operational application. f a mounting bracket is not referenced for your machine please consult with your aladin sales team for the exact match, price and timeline. aladin offers the industries largest bracket offering to support our breakers. escription F10 ccessories eight (lbs) ist rice ounting ap for J350 ounting ystem (not installed) provides all hardware for installation of the F10 reaker onto a J350 machine 822 $3, ounting ap for ink elt 300 X4 ounting ap for ink elt 350 X4 ounting ystem (not installed) provides all hardware for installation of the F10 reaker onto a ink elt 300 X4 machine ounting ystem (not installed) provides all hardware for installation of the F10 reaker onto a ink elt 350 X4 machine 748 $3, $3, F10 ount F10 $3, ounting racket ase ounting racket ase late. ncludes the mounting bolt pattern for the breaker and is intended for use when fabricating brackets. ote: one each of these is included with each edium breaker purchase. $ in it lass 70 achine $ in it lass 100 achine $1, in it lass 150 achine $1, X atalog umber ounting ap for 330 he following accessories can be ordered with your breaker to customize for machine or operational application. f a mounting bracket is not referenced for your machine please consult with your aladin sales team for the exact match, price and timeline. aladin offers the industries largest bracket offering to support our breakers. escription F12 ccessories ounting ystem (not installed) provides all hardware for installation of the F12 reaker onto a 330 machine eight (lbs) ist rice $3, ounting ap for 349 inkage ounting ystem (not installed) provides all hardware for installation of the F12 reaker onto a 349 inkage machine $3, ounting ap for J470 ounting ap for oosan X350-3 ounting ystem (not installed) provides all hardware for installation of the F12 reaker onto a J470 machine ounting ystem (not installed) provides all hardware for installation of the F12 reaker onto a oosan X350-3 machine $3, $3, F12 F12 ount $3, ounting racket ase ounting racket ase late. ncludes the mounting bolt pattern for the breaker and is intended for use when fabricating brackets. ote: one each of these is included with each edium breaker purchase. $

124 F VY Y cont. atalog umber ool - hisel* F6 ptional dd-ons escription referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 385 $1, ool - onical referred for general operation to give good results in most applications where penetration is important. 383 $1, X ool - oil referred for general operation to give good results in most applications where penetration is important. 364 $1, ool - lunt* sed in applications where penetration is not preferred. 404 $1, otes: *ost requested tools for this breaker model. atalog umber ool - hisel* ool - onical ool - oil F8 ptional dd-ons escription referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 532 $1, $1, $1, ool - lunt* sed in applications where penetration is not preferred. 532 $1, otes: *ost requested tools for this breaker model. atalog umber ool - hisel* ool - onical ool - oil F10 ptional dd-ons escription referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 532 $2, $2, $2, ool - lunt* sed in applications where penetration is not preferred. 532 $1, otes: *ost requested tools for this breaker model rices subject to change without notice. ll prices are in dollars.

125 F VY Y cont. atalog umber ool - hisel* F12 ptional dd-ons escription referred for general operation to give good results in most applications where penetration is important. eight (lbs) ist rice 598 $2, ool - onical referred for general operation to give good results in most applications where penetration is important. 598 $2, ool - oil referred for general operation to give good results in most applications where penetration is important. 598 $2, ool - lunt* sed in applications where penetration is not preferred. 598 $2, uto-ube ump ystem uto-ube ump ystem otes: *ost requested tools for this breaker model atalog umber uto-ube ump ystem ubrication system that is mouonted on the breaker for maximum flexibility. o hydraulic connecter is needed, one grease line connection is required. ubrication system that is mounted on the breaker for maximum flexibility. ll hardware is included. o hydraulic connection is needed, one grease line connection is required. F2-F10 ptional dd-ons escription ubrication system that is mounted on the breaker for maximum flexibility. ll hardware is included. o hydraulic connection is needed, one grease line connection is required. $1, $1, eight (lbs) ist rice $1, X atalog umber reaker rease F2-F12 ptional dd-ons escription F X F: eavy uty 2 rade grease specially formulated for high temperature breaker operation to protect key parts such as tool bushings and extend the breakers life. For use with aladin reaker ubrication ump on models F2, F3, F4, F5, F6, F8,F10, F12 eight (lbs) ist rice $

126 X Very good energy transfer ard and abrasive rock reaking boulders econdary breaking edium penetration onabrasive but ductile rock edimentary rock einforced concrete applications Very good penetration oft and nonabrasive rock eneral demolition on-reinforced concrete aximum penetration eneral demolition on-reinforced concrete oft, nonabrasive, easily separated rock reaker iameter (in) art o. ompact reakers lunt hisel (ross ut) oil (yramidal) onical eight (lbs) art o. eight (lbs) art o. eight (lbs) art o. eight (lbs) F F reaker iameter (in) art o. eneral urpose reakers lunt hisel (ross ut) oil (yramidal) onical eight (lbs) art o. eight (lbs) art o. eight (lbs) art o. eight (lbs) F F F F reaker iameter (in) art o. edium uty reakers lunt hisel (ross ut) oil (yramidal) onical eight (lbs) art o. eight (lbs) art o. eight (lbs) art o. eight (lbs) F F F F reaker iameter (in) art o. eavy uty reakers lunt hisel (ross ut) oil (yramidal) onical eight (lbs) art o. eight (lbs) art o. eight (lbs) art o. eight (lbs) F F F F rices subject to change without notice. ll prices are in dollars.

127 - he aladin late ompactor product line offers models to support contractor needs from min-excavator machines to the larger excavators. hese tools are boom mounted and deliver effective, measurable, compaction in a consistent application. ompaction is delivered by using impulse power and frequency to displace water and air from within the soil structure. aladin compactors can be used to compact up to 48 in lifts, work on inclines, can be used to drive posts or sheeting, and are easy to use even for the novice. he compactor line delivers effective compaction while protecting the host machine by minimizing forces transferred into the stick or cylinders. n optional backfill blade can be attached to simplify the trench filling process. he aladin line are easily adapted to use on machines with breaker type circuits and come standard with built in flow control capability to avoid the need to adjust the machine ircuit flow when installed. he compactors use the same mounting caps as the aladin breaker line to reduce required parts and simplify your business. he aladin askforce tool line strives to deliver products that maximize flexibility, and minimize owning costs to deliver profitability to our end-user customers. Features: -he compactors come standard with flow control to optimize the vibration frequency to match typical soil demands, and to protect ompactor hydraulic components. -For reduced maintenance the shock isolators are inclined to reduce damaging shear loads in the base of the mounts. -tandard aladin ounting system give flexibility and reduced investment -ome standard with cross flow check to protect the compactor from sudden flow direction change -eavy baseplates for best transmission of impulse force to the soil -utboard isolator location to provide a stable platform for compaction -ptional backfill blade is available X pecifications tem nit orking eight (lb) Vibration per inute (vpm) entrifugal Force (lb) Flow ange (gpm) X ack ressure (psi) arrier eight (lb) in (lb.) ax (lb.) eference nformation eference machine installations - this list is not all inclusive, please consult with aladin sales team for your particular machine John eere , ubota X-71/91/033/040, obcat 26-50, omatsu John eere , ubota X-71/91/033/040/057, obcat 26-63, omatsu 35/ John eere 50-85/ , / , ubota X-040/057/80, obcat 42-85, omatsu John eere / , / , ubota X-057/080, obcat 63/85, omatsu /all John eere / , /all, ubota X-080, obcat 85, omatsu /all John eere , , omatsu ,osan X

128 VY - cont. odel rder ode F eference olt attern F F late ompactor ounting ccessories escription from lb. ( kg), fits into a 12 in (30 cm) trench from lb. ( kg), fits into a 20 in (51 cm) trench hip t. (lb.) ist rice 275 $5, $5, F1000 from lb. ( kg), fits into a 24 in (61 cm) trench 800 $6, X F F F12 rder ode F eference olt attern 027 ounting ap ubota X J 8018 from lb. ( kg), fits into a 24 in (61 cm) trench from lb. ( kg), fits into a 26 in (66 cm) trench from lb. ( kg), fits into a 36 in (91 cm) trench 250 late ompactor ounting ccessories escription dapts the 250 late ompactor to a 027 interface using a bolt on top cap. dapts the 250 late ompactor to the ubota X018-4 using a bolt on top cap. ins are not included. dapts the 250 late ompactor to the J 8018 using a bolt on top cap. ins are not included $8, $11, $17, hip t. (lb.) ist rice 78 $ $ $ rder ode F eference olt attern 350 late ompactor ounting ccessories escription hip t. (lb.) ist rice inch in center. ins are not included. 75 $ rder ode F eference olt attern 027 ounting ap 030 ounting ap ounting ap for ubota late ompactor ounting ccessories escription dapts the 1000 late ompactor to a 027 interface using a bolt on top cap. dapts the 1000 late ompactor to a 030 interface using a bolt on top cap. dapts the 1000 late ompactor to the ubota 9930 ounting ystem hip t. (lb.) ist rice $1, $1, $1, rices subject to change without notice. ll prices are in dollars.

129 he round hark family of brush cutters have been engineered to handle your toughest vegetation management jobs. hey are ideal for roadside maintenance, right of way clearing, site preparation, fire control, fence line maintenance, and trail maintenance. 72" & 78" (30-45 ) F X Y 72" & 78" igh Flow xtreme uty Features esigned to clear medium to heavy density brush and hardwoods up to 7 in diameter. hen the exclusive, patent pending retractable forward shield comes in contact with a tree, it moves up and back to expose the entire cutting edge of each blade while protecting the operator from flying debris. he motor and valve assembly are fully shielded preventing contact with debris he hydraulic hoses can be easily rerouted to allow hookup to multiple machine brands ual steps improve cab egress safety and accommodate cab doors that open from either direction 72" and 78" (high flow only). ydraulic couplers are included X tandard pressure gauge indicator, easily visible to the operator helps prevent excessive stalling and overheating. ptional carbide tooth stump grinding kit increases mulching performance and takes the stump down to ground level. his option is highly recommended. Four double bevel reversible edge blades. F xclusive retractable forward shield (atent ending). hen using the round hark on brush/trees that are bigger than 4 in diameter, the shield will retract on its own to allow for maximum performance. eavy duty push bar pushes trees away from the operator while enhancing the cutting action by weakening the tree trunk as it bends. 143

130 X 66" & 72" (20-34 ) X Y 66" & 72" tandard & igh Flow Features esigned to clear medium to heavy density brush and hardwoods up to 7 in diameter. hen the exclusive, patent pending retractable forward shield comes in contact with a tree, it moves up and back to expose the entire cutting edge of each blade while protecting the operator from flying debris. he motor and valve assembly are fully shielded preventing contact with debris he hydraulic hoses can be easily rerouted to allow hookup to multiple machine brands ual steps improve cab egress safety and accommodate cab doors that open from either direction vailable in 66" and 72" eavy uty push bar pushes trees away from the operator while enhancing the cutting action by weakening the tree trunk as it bends. tandard bolt-on carbide stump grinding teeth increases mulching performance and takes the stump down to ground level. hree double bevel edge blades on 66" model and four double bevel edge blades on 72" model. ptional pressure gauge indicator, easily visible to the operator helps prevent excessive stalling and overheating rices subject to change without notice. ll prices are in dollars.

131 X Y esigned to clear medium to heavy density brush and hardwoods up to 7 in diameter xclusive, patent pending retractable forward shield comes in contact with a tree, it moves up and back to expose the entire cutting edge of each blade while protecting the operator from flying debris vailable in 66" (standard/high flow), 72" (standard and high flow), and 78" (high flow). ydraulic couplers are included. pecifications odel eight ength in. utting eight in. tump rinding eight 66" & 72" X Y F - 7 Y () 66 tandard/igh Flow (20-34 ) X utter with.50 couplers $10, tandard/igh Flow (20-34 X utter with.625 couplers $10, tandard/igh Flow (20-34 ) X utter with.75 couplers $10, Y () 72 tandard/igh Flow (20-34 ) X utter with.50 couplers $11, tandard/igh Flow (20-34 ) X utter with.625 couplers $11, tandard/igh Flow (20-34 ) X utter with.75 couplers $11,750 utting idth () arbide ooth it (24 bolt-on teeth) - 66" model $426 arbide ooth it (48 bolt-on teeth) - 72" model $475 ose xtension it $214 ressure auge it $335 idth (overall) utting apacity eck hickness equired ydraulic equired ift apacity (lbs) () eight (approx) " 81.75" 3.25".75" 66" 71.13" 7".25" teel lbs " 85.59" 3.25".50" 72" 77.38" 7".25" teel lbs " 85.59" 3.25".38" 72" 77.38" 7".25 teel lbs " 91.62" 3.25".38" 78" 83.13" 7".25 teel lbs. ote: e highly recommend the purchase of guarding to protect operator and machine from flying debris in harsh forestry and land clearing environments. lease refer to the Forestry uarding section on page 119 for more information. For kid-teer loaders only. eplacement lade it (3 double-bevel blades and hardware) - 66" model $265 eplacement ear late it - 66" model $129 eplacement ear late it - 72" model $137 eplacement lade it (4 double-bevel blades) - 72" model $702 X 145

132 F X Y F - 7 Y () 72 igh Flow (30-45 ) utter with.50 couplers $13, igh Flow (30-45 utter with.625 couplers $13, igh Flow (30-45 ) utter with.75 couplers $13,771 X 7 Y () 78 igh Flow (30-45 ) utter with.50 couplers $14, igh Flow (30-45 ) utter with.625 couplers $14, igh Flow (30-45 ) utter with.75 couplers $14,550 () arbide ooth it (18 bolt-on teeth) - 72" model $426 arbide ooth it (22 bolt-on teeth) - 78" model $425 ose xtension it $214 () eplacement lade it (4 double-bevel blades and hardware) - 72" and 78" models $726 eplacement ear late it - 72" model $137 eplacement ear late it - 78" model $ rices subject to change without notice. ll prices are in dollars.

133 Y Y F esigned to clear light to medium density brush and hardwoods up to 4 in diameter. he entirely new drive train runs smooth and quiet while moving easily to clear the toughest material. ual pressure reliefs on the hydraulic motor protect against pressure spikes that could damage the drive system f the situation requires, the cutting blades will stop rotating within seconds once the motor is disengaged minimizing the potential for damage to the machine and drive train vailable in 60 (standard flow), 72 (standard/high flow), and 78 (standard/high flow). ydraulic couplers are included X ew motor and drive train. ew.25 thick steel deck design. eplaceable skid shoes. n optional pressure gauge indicator easily visible to the operator helps prevent excessive stalling and overheating. i-directional blades allow the operator to cut in both directions extending operational life and reducing maintenance costs. ptional dual wheel kits are available that mount to the underside of the front deck to keep the blades off the ground and prevent scalping. 147

134 Y esigned to clear light to medium density brush and hardwood up to 4 diameter rive system designed for smooth and quiet operation hree bi-directional blades are standard ptional pressure gauge and dual steel wheels available pecifications X odel eight ength in. utting eight eck eight utting idth idth (overall) utting apacity - V eck hickness equired ydraulic equired ift apacity (lbs) () eight (approx) teel lbs teel lbs teel lbs teel lbs teel lbs teel lbs teel lbs ote: e highly recommend the purchase of guarding to protect operator and machine from flying debris in harsh forestry and land clearing environments. lease refer to the Forestry uarding section on page 119 for more information. For kid-teer loaders only. Y F - 60 tandard Flow (15-25) with 1/2 couplers $6, " tandard (15-25 ) with 1/2" couplers $6, " igh Flow (26-32 ) with 1/2" couplers $7, " igh Flow (26-32 ) with 5/8" couplers $7, " igh Flow (26-32 ) with 3/4" couplers $7, " igh Flow (33-40 ) with 1/2" couplers, 3/8" female case drain $7, " igh Flow (33-40 ) with 5/8" couplers, 3/8" female case drain $7, " igh Flow (33-40 ) with 3/4" couplers, 3/8" female case drain $7, " igh Flow (33-40 ) with 5/8" couplers, 3/8" male case drain $7, " igh Flow (33-40 ) with 3/4" couplers, 3/8" male case drain $7, " tandard (15-25 ) with 1/2" couplers $7, " igh Flow (26-32 ) with 1/2" couplers $8, " igh Flow (26-32 ) with 5/8" couplers $8, " igh Flow (26-32 ) with 3/4" couplers $8, " igh Flow (33-40 ) with 1/2" couplers, 3/8" female case drain $8, " igh Flow (33-40 ) with 5/8" couplers, 3/8" female case drain $8, " igh Flow (33-40 ) with 3/4" couplers, 3/8" female case drain $8, " igh Flow (33-40 ) with 5/8" couplers, 3/8" male case drain $8, " igh Flow (33-40 ) with 3/4" couplers, 3/8" male case drain $8, Y X rices subject to change without notice. ll prices are in dollars.

135 Y cont. Y F - cont. () auge ight ndicator (ption - odels & ) $ auge ight ndicator (ption - odel ) $ ual heel it $ ose xtension it $ () eplacement lade it $ eplacement lade it $ eplacement lade it $ ear hoe it (air) $77.25 ote: e highly recommend the purchase of guarding to protect operator and machine from flying debris in harsh forestry and land clearing environments. For kid-teer loaders only. () / niversal Front hield $1, odel V95-2 omplete ackage: op uard, orking ight, ear rille uard and yd onnection F8FV2001 () ricing pon equest op uard it, V eries F ricing pon equest orking ight it (F/) F ricing pon equest ear rille uard. V95-2 F ricing pon equest ydraulic onnection uard it F ricing pon equest V95-2s ef over, it,, V95-2 F ricing pon equest ubota ab uarding Front indow uard - ire, XX080-4, nclosed ab F ricing pon equest FY X X 149

136 FY X Y eavy-duty formed 3/16 steel plate. asy bolt-on installation no welding. omplete onnect nder ressure () manifold protection. inged guards for manifold access. eavy-duty formed steel plate construction. olt-on design requires no welding. oes not interfere with tie-down hook access or compartment doors. eparture angle of 21 ttaches to heavy duty rear bumper. pper mounts weld to frame. eavy-duty design protects radiator from debris while allowing ample airflow. wings open to allow unhindered access to engine compartment. rotects rear of machine from falling debris. ool-less opening from the inside and out and hinges up for emergency egress. upported by cab frame and held in place using existing rivnuts. aintains top window visibility. ow profile design to avoid tree limbs. ncludes light guards. Filters debris from entering air cooler area. elps prevent overheating issues and prolongs life of coolers. olt-on (hole modification required), no welding required. eplaceable steel mesh screen design. eavy duty design to protect cab glass. eplaces side screens for for use in harsh environments. FY () ase V300, V340 & V380 ier 4 ydraulic connection guards, F ricing pon equest ssembly, rear bumper,, F ricing pon equest ear grill guard, / 4F, F ricing pon equest weep kit, /, 90 4F, F ricing pon equest op guard w light guards, F ricing pon equest dditional intake screens, V300, F ricing pon equest ide screen kit, / 4F, F ricing pon equest rices subject to change without notice. ll prices are in dollars.

137

138 aladin ttachments has a variety of buckets to suit your needs. From light material buckets to heavy duty material buckets to special purpose buckets, our attachments can increase your productivity - saving you time and money. ince many of our buckets are customized to your needs, when you place your order you will need to choose your bucket, the mounting, hydraulic kit (if needed), and any options you would like. s you look through the products, notice the red headings in the charts - they will alert you to the choices you need to make. hoose your bucket - be sure to check loader capacity before ordering Y F (75 degree back) () 73 onstruction 4-in-1 F $5, onstruction 4-in-1 F $5, onstruction 4-in-1 F $5, onstruction 4-in-1 F $6, (esigned for rack achines) 84 onstruction 4-in-1 (70 back) F $6, onstruction 4-in-1 (70 back) F $6, rice of loader mounting must be added to the attachment price hoose a mount Y Y ontact ustomer ervice at (800) () ecide what options you want XV FF xtra eavy-uty oothbar for uckets with olt-n dge () For ucket F0976 with 8 teeth F9173-FF41 $1, For ucket F0977 with 9 teeth F9179-FF41 $1, For ucket F0985 with 9 teeth F9183-FF41 $1, For ucket F $1, For ucket F $1, e sure to look for the warning symbol- this box contains important information pertaining to that particular bucket and how it will attach to your prime mover : FF kid-teer buckets have a 70 angle on the back. his may increase or decrease the effective rollback and dump angles of your kid-teer. pecify kid-teer make and model when ordering. f you have any questions about placing your order, contact ustomer ervice at rices subject to change without notice. ll prices are in dollars.

139 4--1 deal for site clean up, grading, scraping grappling, dozing and brush removal ingle bevel bolt on dozer edge, double bevel bolt on clam edges, front and back - these features are exclusive to FF any sizes available arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs. Y F (75 degree back) () 73 onstruction 4-in-1 F $5, onstruction 4-in-1 F $6, onstruction 4-in-1 F $6, onstruction 4-in-1 F $6, (esigned for rack achines) : rime overs with tracks and with an operating weight of 7,000 lbs. or more have port reliefs installed on the prime mover s main control valve to protect both sides of the auxiliary circuit. pecifications odel # eight (pprox) egree ack idth eight epth lamshell pening apacity truck apacity eaped F lbs yd³ 0.66 yd³ F lbs yd³ 0.71 yd³ F lbs yd³ 0.75 yd³ F lbs yd³ 0.90 yd³ F lbs yd³ 0.80 yd³ F lbs yd³ 0.97 yd³ 4--1 F - :,, F - Y. Y: 84 onstruction 4-in-1 (70 back) F $6, onstruction 4-in-1 (70 back) F $6, rice of loader mounting must be added to the attachment price Y Y () ontact ustomer ervice at (800) F - X 153

140 4--1 cont F - cont. XV FF xtra eavy-uty oothbar for uckets with olt-n dge () For ucket F0976 with 8 teeth F9173-FF41 $1, For ucket F0977 with 9 teeth F9179-FF41 $1, For ucket F0985 with 9 teeth F9183-FF41 $1, For ucket F0990 with 9 teeth F9188-FF41 $1, For ucket F $1, For ucket F $1, ote: hipping weights vary depending on loader mounting and packaging VY-Y deal for site clean up, grading, scraping grappling, dozing and brush removal ingle bevel bolt on dozer edge, double bevel bolt on clam edges, front and back - these features are exclusive to FF any sizes available ouble.25 plate steel clamshell reinforced with.75 x 6 cutting edge front,.50 x 6 back and.50 wearbars; ear-resistant acal steel tapered cutting edge:.75 x 6 ; ear-resistant acal steel tapered dozer edge; nd plates:.375 with mounting brackets. arrier pecifications ift apacity perating eight <10,000 lbs. <20,000 lbs. : rime overs with tracks and with an operating weight of 7,000 lbs. or more have port reliefs installed on the prime mover s main control valve to protect both sides of the auxiliary circuit. pecifications odel # eight (pprox) idth eight epth lamshell pening apacity truck apacity eaped F lbs yd³ 0.99 yd³ F lbs yd³ 1.10 yd³ F lbs yd³ 1.18 yd³ rices subject to change without notice. ll prices are in dollars.

141 155

142 4--1 VY-Y cont VY-Y F :,, F - Y. Y: Y F () 82 onstruction 4-in-1 eavy-uty F $7, onstruction 4-in-1 eavy-uty F $7, onstruction 4-in-1 eavy-uty F $8, Y Y ontact ustomer ervice at (800) V, 8, & F F Y () () For ucket F3182 (9 holes, 9.75 spacing)* $ For ucket F3190 (10 holes, 9 spacing)* $ For ucket F3196 (9 holes, spacing)* $ For ptional olt-n dge rill atterns (i.e. ase ole atterns) - all (800) * uckets built after erial # contact Factory for replacement edge kit arrier pecifications ift apacity perating eight <10,000 lbs. <20,000 lbs. Functions as a loader bucket, clam, dozer, scraper, and bottom dump bucket trong hinges & pins to distribute load eplacement bolt-on wear edge, bolt-on tooth bars, and bolt-on tooth bars that fit over weld-on wear edge ptions: olt-on side cutters, spill guards : rime overs with tracks and with an operating weight of 7,000 lbs. or more have port reliefs installed on the prime mover s main control valve to protect both sides of the auxiliary circuit. pecifications idth eight (pprox) eight rapple epth eaped pening apacity tility 60" 585 lbs 27.32" 34.5" 35" yd ³ 66" 620 lbs 27.32" 34.5" 35" yd ³ 72" 655 lbs 27.32" 34.5" 35" yd ³ onstruction 72" 900 lbs 27.69" 37.47" 34.79" cu/ft 78" 935 lbs 27.69" 37.47" 34.79" cu/ft 84" 975 lbs 27.69" 37.47" 34.79" 23.4 cu/ft uro 72" 940 lbs 27.69" 37.47" 34.79" cu/ft 78" 975 lbs 27.69" 37.47" 34.79" cu/ft 84" 1015 lbs 27.69" 37.47" 34.79" 23.4 cu/ft rices subject to change without notice. ll prices are in dollars.

143 cont F - : V. Y: 4--1 & Y tility uckets 4-in-1 ucket ith & ithout eeth niversal ount () 60 utility bucket no hoses $3, utility bucket no hoses $3, utility bucket with teeth, no hoses $3, utility bucket no hoses $3, utility bucket with teeth, no hoses $4, onstruction uckets 4-in-1 ucket ith & ithout eeth niversal ount 72 construction bucket no hoses $4, construction bucket with teeth, no hoses $4, construction bucket no hoses $4, construction bucket with teeth, no hoses $4, construction bucket no hoses $4, construction bucket with teeth, no hoses $4, F - :,,. Y: () 72 4-in-1 construction bucket $4, in-1 construction bucket $4,

144 cont F - cont. pill uard ssembly Y () 60 spill guard for utility bucket $ spill guard for utility bucket $ spill guard for utility bucket $ olt-on dge ssembly 60 bolt-on edge assembly for utility bucket $ bolt-on edge assembly for utility bucket $ bolt-on edge assembly for utility bucket $ ooth ar ssembly 66 tooth bar (standard) $ tooth bar (over bolt-on edge) $ tooth bar (standard) $ tooth bar (over bolt-on edge) $ pill uard ssembly () 72 spill guard for construction bucket $ spill guard for construction bucket $ spill guard for construction bucket $ olt-on dge ssembly 4--1 & Y onstruction uro ount 4-in-1 uckets 72 bolt-on edge assembly $ bolt-on edge assembly $ bolt-on edge assembly $ ooth ar ssembly side cutter hole mounting (construction only) () 72 construction bucket no hoses $4, construction bucket no hoses $4, construction bucket no hoses $5, Y ( Y) () 66 long hose kit with flat face couplers $ long hose kit with flat face couplers $ long hose kit with flat face couplers $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar(over bolt-on edge) $1, side cutter assembly (construction Y) $ rices subject to change without notice. ll prices are in dollars.

145 cont F () 60 4-in-1 bucket $3, in-1 bucket $3, Y () J wide edge group $6, Y at / edge group $8, at / 90 wide $6, ehl ynacarrier edge group $6, ngersoll and V642/V643 pre2002 edge group $6, anitou edge group $6, Y J 506 / 508 edge group $8, ull 644 / 944 edge group $8, kyrak edge group $8, erex with Quick ttach edge group $8, pright edge group $8, F 1.00 Y () omatsu $6, acker wide with edge $6, Y at / edge group $8, J 411 edge group $10, ase 321 with edge 82.7 wide $9, X 159

146 cont F cont. cont. () 1.50 Y J wide (serial # and higher) edge group $7, Y J 411 with edge edge group $13, Y blank no mounts 106 wide includes bolt-on edge kit $14, Y at 14/24/ wide with edge $14, F - F F Y Q F. Y Q. - & ().375 x 3 ingle evel eld-n dge $ x 4 ingle evel eld-n dge $ x 6 ingle evel eld-n dge $ x 8 ingle evel eld-n dge $ x 4 nd iece for ucket - eft and F $ x 4 nd iece for ucket - ight and F $ x 4 nd iece for ucket - eft and F $ x 4 nd iece for ucket - ight and F $25.56 V * F FF - ( 6, ) ().75 x 8 reversible edge with 13/16 holes spaced 6 apart $4.68/inch.754 x 2.5 rade 8 plow bolts with lock washers and nut F9737 $4.30 each rices subject to change without notice. ll prices are in dollars.

147 F F F / F () fork pocket bucket yd $4, VY-Y / pecifications odel eight (approx) esigned for leveling, digging and loading dirt, rock and other abrasive material onstructed with stronger material and heavy-duty wear edges or optional teeth for penetration 83 and 98 models for general purpose work.75 x 6 wear-resistant acal steel tapered cutting edge eversible cutting edge available arrier pecifications ift apacity perating eight <10,000 lbs. <32,000 lbs. idth eight epth VY-Y / : V Y: eading dge apacity truck apacity eaped F lbs yd³ 1.11 yd³ F lbs yd³ 1.23 yd³ F lbs yd³ 1.52 yd³ F lbs yd³ 1.99 yd³ Y F () 83 onstruction/ndustrial ucket F $2, onstruction/ndustrial ucket F $2, onstruction/ndustrial ucket F $2, xtra apacity onstruction/ndustrial ucket F $2, / F X 161

148 VY-Y / cont. VY-Y / F cont. Y Y ontact ustomer ervice at (800) V, 8, & () () For ucket F3382 (9 holes, 9.75 spacing)* $ For ucket F3390 (9 holes, spacing)* $ For ucket F3396 (9 holes, spacing)* $ For ucket F3397 (9 holes, spacing)* $ For ptional olt-n dge rill atterns (i.e. ase ole atterns) - all (800) * uckets built after erial # and/or hose spacing contact (800) for replacement edge kit. - XV FF eavy-uty oothbar for uckets without olt-n dge () For ucket F3382 with 10 teeth $ For ucket F3390 with 10 teeth $ For ucket F3396 with 10 teeth $ For ucket F3397 with 10 teeth $ eavy-uty oothbar for uckets with olt-n dge For ucket F3382 with 10 teeth $1, For ucket F3390 with 10 teeth $1, For ucket F3396 with 10 teeth $1, For ucket F3397 with 10 teeth $1, xtra eavy-uty oothbar for uckets without olt-n dge For ucket F3382 with 10 teeth $1, For ucket F3390 with 10 teeth $1, For ucket F3396 with 10 teeth $1, For ucket F3397 with 10 teeth $1, xtra eavy-uty oothbar for uckets with olt-n dge For ucket F3382 with 10 teeth $1, For ucket F3390 with 10 teeth $1, For ucket F3396 with 10 teeth $1, For ucket F3397 with 10 teeth $1, rices subject to change without notice. ll prices are in dollars.

149 163

150 VY-Y / cont. VY-Y / F : V Y: Y F () 83 onstruction/ndustrial ucket F $2, onstruction/ndustrial ucket F $2, onstruction/ndustrial ucket F $2, xtra apacity onstruction/ndustrial ucket F $2, XV FF eavy-uty oothbar for uckets with olt-n dge () For ucket F3382 with 10 teeth $1, For ucket F3390 with 10 teeth $1, For ucket F3396 with 10 teeth $1, For ucket F3397 with 10 teeth $1, xtra eavy-uty oothbar for uckets without olt-n dge For ucket F3382 with 10 teeth $1, For ucket F3390 with 10 teeth $1, For ucket F3396 with 10 teeth $1, For ucket F3397 with 10 teeth $1, xtra eavy-uty oothbar for uckets with olt-n dge For ucket F3382 with 10 teeth $1, For ucket F3390 with 10 teeth $1, For ucket F3396 with 10 teeth $1, For ucket F3397 with 10 teeth $1, rices subject to change without notice. ll prices are in dollars.

151 VY-Y cont. VY-Y cont. - () roup -.75" x 10" x 96", style, 2 pc. edge group with hardware 12 holes $ roup -.75" x 8" x 96" overall with hardware 9 holes $ roup -.75" x 6" x 90.63" overall with hardware 8 holes $ roup -.75" x 8" x 84" overall with hardware 9 holes $ roup -.75" x 8" x 82" overall with hardware 7 holes $ roup F -.75" x 8" x 79.5" overall with hardware 7 holes $ roup -.75" x 8" x 92.5" overall with hardware 9 holes $ roup -.75" x 8" x 102" overall J 3 piece edge with hardware 9 holes $ dge roup (6 holes total) -.75" x 8" x 66" $ dge roup (7 holes total)-.75" x 8" x 61" $ dge roup (7 holes total) -.75" x 8" x 73" $ dge roup (7 holes total) -.75" x 8" x 74" $ dge roup (7 holes total)-.75" x 8" x 77" $ dge roup (7 holes total) -.75" x 8" x 82" $ dge roup (8 holes total) -.75" x 8" x 85" $ dge roup (9 holes total) -.75" x 8" x 90" $ dge roup (15 holes total) -.75" x 10" x 106" $1, rices subject to change without notice. ll prices are in dollars.

152 169

153 VY-Y cont. VY-Y F.50 Y X () at 902/906/ wide with edge $2, at 902/906/ wide edge not included $2, J wide includes edge $3, omatsu 75/85/95 66 wide edge kit optional $2, Y J wide (serial # and higher) $2, Volvo wide $2, Volvo Y wide $3, Y ase wide with edge $2, at 902/906/ wide incl edge group $3, at / 72 wide edge group $2, at / 72 wide $4, at / 80 wide edge group F $3, Furukawa w/universal hitch 72 wide edge group $2, J 407/409ZX 77 wide edge kit $2, J 407/409ZX 85 wide 1.00 yd $2, J 407/409ZX 96 wide 1.12 yd $2, J wide with edge edge kit $4, J wide mulch bkt with edge edge group $4, ew olland 80 with Q 60 wide $3, ew olland -80 with Q 72 wide $3, wide $2, Volvo wide with edge $3, Volvo wide with edge $3, Y tlas 70 wide $2, wide $2, Y at / 96 wide edge group $3, at / 84 wide edge group $3, J 407/409ZX 85 wide $3, J 407/409ZX 77 wide with edge $3, Y at / $4, J 407/ wide with edge edge group $3, J wide (serial # and higher) edge group $3, acker 750/418/ $4, Y at 902 / 906 / 908 edge group $4, ase 221 / edge group $4, J 407/408/ edge group $4, ew olland -70 / -80 edge group $4, rices subject to change without notice. ll prices are in dollars.

154 VY-Y cont. VY-Y F cont Y cont. () at / edge group $4, at wide $8, Y at / edge group $5, Y at / 42 ext spill guard edge group $7, Y at / edge group $5, Y at / edge group $6, Volvo edge group $6, Y at / edge group $6, Y at / edge group $7, at / light material high visibility edge group $8, J Q-fit light material high visibility $8, * () roup -.75" x 10" x 96", style, 2 pc. edge group with hardware 12 holes $ roup -.75" x 8" x 96" overall with hardware 9 holes $ roup -.75" x 6" x 90.63" overall with hardware 8 holes $ roup -.75" x 8" x 84" overall with hardware 9 holes $ roup -.75" x 8" x 82" overall with hardware 7 holes $ roup F -.75" x 8" x 79.5" overall with hardware 7 holes $ roup -.75" x 8" x 92.5" overall with hardware 9 holes $ roup -.75" x 8" x 102" overall J 3 piece edge with hardware 9 holes $ dge roup (6 holes total) -.75" x 8" x 66" $ dge roup (7 holes total)-.75" x 8" x 61" $ dge roup (7 holes total) -.75" x 8" x 73" $ dge roup (7 holes total) -.75" x 8" x 74" $ dge roup (7 holes total)-.75" x 8" x 77" $ dge roup (7 holes total) -.75" x 8" x 82" $ dge roup (8 holes total) -.75" x 8" x 85" $ dge roup (9 holes total) -.75" x 8" x 90" $ dge roup (15 holes total) -.75" x 10" x 106" $1,

155 VY-Y hree sizes fit wide range of applications ear-resistant acal steel tapered cutting edge : FF kid-teer buckets have a 70 angle on the back. his may increase or decrease the effective rollback and dump angles of your kid-teer. pecify kid-teer make and model when ordering. VY-Y F - : V : Y F () 63 eavy-uty aterial ucket F $1, eavy-uty aterial ucket F $1, eavy-uty aterial ucket F $1, rice of loader mounting must be added to the attachment price arrier pecifications ift apacity perating eight <5,000 lbs. <8,000 lbs. pecifications odel eight eading apacity idth eight epth apacity (approx) dge eaped F lbs yd yd 3 F lbs yd yd 3 F lbs yd yd 3 Y Y () ontact ustomer ervice at (800) () V, 8, & rilled for FF olt-n dge (oles spaced 6 apart, center to center) For ucket F0464* 7 holes, 10 spacing $ For ucket F0473* 7 holes, 11 spacing $ For ucket F0481* 9 holes, 9.75 spacing $ For ptional olt-n dge rill atterns (i.e. ase ole atterns) - all (800) * uckets built after erial # and/or hose spacing contact (800) for replacement edge kit. X rices subject to change without notice. ll prices are in dollars.

156 VY-Y cont. VY-Y F - cont. - XV FF tandard-uty oothbar for uckets without olt-n dge () For ucket F0473 with 8 teeth $ For ucket F0481 with 8 teeth $ tandard-uty oothbar for uckets with olt-n dge For ucket F0473 with 8 teeth $ For ucket F0481 with 8 teeth $ eavy-uty oothbar for uckets without olt-n dge For ucket F0473 with 8 teeth $ For ucket F0481 with 9 teeth $ eavy-uty oothbar for uckets with olt-n dge For ucket F0473 with 8 teeth $ For ucket F0481 with 10 teeth $ F FF - - (800) F 173

157 VY-Y Four sizes fit wide range of loaders 10 gauge, reinforced wrapper 8 bolt-on spill guard available olt-on reversible cutting edges and tooth bars available arrier pecifications ift apacity perating eight <10,000 lbs. <32,000 lbs. pecifications odel eight eading apacity apacity idth eight epth (approx) dge truck eaped F lbs yd yd 3 F lbs yd yd 3 F lbs yd yd 3 F lbs yd yd 3 VY-Y F : Y F. Y F () 62 ound tility ucket F $1, ound tility ucket F $1, ound tility ucket F $2, ound tility ucket F $2, Y Y ontact ustomer ervice at (800) () () V -, 8, & For ucket F2560 (7 holes, 9 spacing)* $ For ucket F2572 (7 holes, 11 spacing)* $ For ucket F2584 (9 holes, 10 spacing)* $ For ucket F2596 (9 holes, spacing)* $ For ptional olt-n dge rill atterns (i.e. ase ole atterns) - all (800) * uckets built after erial # and/or hose spacing contact (800) for replacement edge kit. VY-Y Y X rices subject to change without notice. ll prices are in dollars.

158 VY-Y cont. VY-Y F cont. cont. - V Y Y () 8 pill uard for F2560 F $ pill uard for F2572 F $ pill uard for F2584 F $ pill uard for F2596 F $ XV FF tandard-uty oothbar for uckets without olt-n dge () For ucket F2560 with 7 teeth $ For ucket F2572 with 8 teeth $ For ucket F2584 with 10 teeth $ For ucket F2596 with 10 teeth $ tandard-uty oothbar for uckets with olt-n dge For ucket F2560 with 6 teeth $ For ucket F2572 with 8 teeth $ For ucket F2584 with 10 teeth $ For ucket F2596 with 11 teeth $ eavy-uty oothbar for uckets without olt-n dge For ucket F2560 with 7 teeth $ For ucket F2572 with 8 teeth $ For ucket F2584 with 10 teeth $ For ucket F2596 with 10 teeth $ eavy-uty oothbar for uckets with olt-n dge For ucket F2560 with 7 teeth $ For ucket F2572 with 8 teeth $ For ucket F2584 with 9 teeth $ For ucket F2596 with 10 teeth $1,

159 -Y VY-Y 75, 80 & 84 with 1 cutting edge and back drag plating for strength wear protection trong box sections across the top,heel, & front edge igh tensile side plates sed for nursery applications, snow removal & construction pecifications eight idth (approx) -Y VY-Y F - eight epth ollback ngle apacity eaped 75" 633 lbs 25" 38" ft³ 75" * 633 lbs 25" 38" ft³ 80" 746 lbs 25" 38" ft³ 80" * 810 lbs 25" 38" ft³ 84" 749 lbs 25" 38" ft³ 84" * 813 lbs 25" 38" ft³ *ucket with 9 teeth () 75 high capacity dirt bucket (21.0 ft³) 8 holes/10.01 spacing $1, high capacity dirt bucket with 8 teeth $1, high capacity dirt bucket (24.7 ft³) 7 holes/12 spacing $1, high capacity dirt bucket with 9 teeth $2, high-capacity dirt bucket (26.8 ft³) 9 holes/9.75 spacing $2, high capacity dirt bucket with 9 teeth $2, Y -Y VY-Y F - Y () 80 high capacity dirt bucket w/side cutters and $2, high capacity dirt bucket w/9 teeth and side cutters $2, rices subject to change without notice. ll prices are in dollars.

160 -Y.75 x 6 high carbon, beveled edge ptional bolt-on wear edge ear plating across bottom to prevent damage on bucket floor Forward swept top wrap to better contain wet or loose materials pecifications idth eight (approx) -Y F - eight epth apacity eaped 84" 740 lbs 35" 41" yd³ 96" 880 lbs 35" 41" 2 yd³ -Y () 84 high capacity light material/snow bucket (1.625 yd³) 9 holes/9.75 spacing $2, high capacity light material/snow bucket (2 yd³) 9 holes/10.83 spacing $2,

161 - he radco igh-ump bucket extends lift height by more than five feet! (60.5") compared to a standard general purpose bucket. he igh-ump bucket offers 113 of roll-out he bucket is designed for use with light-duty material vailable in 60", 72", 84" and 96" widths pecifications idth eight apacity eight epth (approx) eaped 60" 1000 lbs 32.3" 49.9" 1.00 yd 3 72" 1170 lbs 32.3" 49.9" 1.20 yd 3 84" 1275 lbs 32.3" 49.9" 1.50 yd 3 96" 1359 lbs 32.3" 49.9" 1.70 yd 3 - F - () 60" igh-ump ucket (1.00 yd 3 ) 7 holes/9.00" spacing $4, " igh-ump ucket (1.19 yd 3 ) 7 holes/11.00" spacing $4, " igh-ump ucket (1.44 yd 3 ) 9 holes/9.75" spacing $4, " igh-ump ucket (1.68 yd 3 ) 16 holes/6.00" spacing $4, , 8, & () 60" (7 holes, 9.00" spacing) $ " (7 holes, 11.00" spacing) $ " (9 holes, 9.75" spacing) $ " (16 holes, 6.00" spacing) FF $ () 60" hose kit for bucket $ " hose kit for bucket $ " hose kit for bucket $ " hose kit for bucket $ *ose its-oses from the bucket to the loader are not supplied. ose packages available are listed above or the dealer can make up their own hoses. ose quick couplers are not supplied rices subject to change without notice. ll prices are in dollars.

162 F - odels for utility and dirt applications igher strength and capacity for larger kid- teers ear-resistant acal steel tapered cutting edge arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs. : FF kid-teer buckets have a 70 angle on the back. his may increase or decrease the effective rollback and dump angles of your kid-teer. pecify kid-teer make and model when ordering. pecifications odel se eight (approx) F - F - : V idth eight epth eading dge apacity truck apacity eaped F0485 tility 850 lbs yd yd 3 F0496 tility 970 lbs yd yd 3 () 82.5 arge-frame kid-teer ucket F $2, arge-frame kid-teer ucket F $2, V, 8, & () For ucket F0485 (9 holes, 9.75 spacing)* $ For ucket F0496 (9 holes, spacing)* $ * uckets built after erial # and/or hose spacing contact (800) for replacement edge kit. - XV FF () eavy-uty oothbar for uckets without olt-n dge For ucket F0485 with 10 teeth $ For ucket F0496 with 10 teeth $ eavy-uty oothbar for uckets with olt-n dge For ucket F0485 with 10 teeth $ For ucket F0496 with 10 teeth $ xtra eavy-uty oothbar for uckets without olt-n dge For ucket F0485 with 10 teeth $1, For ucket F0496 with 10 teeth $1, xtra eavy-uty oothbar for uckets with olt-n dge For ucket F0485 with 10 teeth $1, For ucket F0496 with 10 teeth $1,

163 Y F Y F F - ow rofile tandard Floor (ptional ide utters vailable) () 68 bucket F, ight $1, bucket F w/8 teeth, ight $1, bucket, F td $1, bucket, F w/8 teeth td $1, ow rofile ong Floor (ptional ide utters vailable) 72 bucket, F w/8 teeth ight $1, bucket, F w/8 teeth td $1, F - ( ) () 72 light material loader bucket - heaped capacity.61yd 3, struck capacity.48yd $1, light material loader bucket - heaped capacity.72yd 3, struck capacity.55yd $1, light material loader bucket - heaped capacity.78yd 3, struck capacity.60yd $1, rices subject to change without notice. ll prices are in dollars.

164 -F F 36 long floor buckets for better visibility, productivity and cutting grade igh strength side cutters tie into the front edge for better strength and longer life -F F F - () 60 bucket (15.8 ft³) 7 holes/9 spacing $1, bucket with 6 teeth $1, bucket 9 holes/7 spacing $1, bucket (17.5 ft³) 7 holes/10 spacing $1, bucket with 7 teeth $1, bucket (14.8 ft³) 7 holes/10 spacing $1, bucket with 8 teeth $1, bucket (19.2 ft³) 7 holes/11 spacing $1, bucket with 8 teeth $1, bucket (20.9 ft³) 9 holes/9 spacing $1, bucket with 8 teeth $1, bucket (22.0 ft³) 9 holes/9.75 spacing $1, bucket with 9 teeth $2, bucket (22.7 ft³) 9 holes/9.75 spacing $1, bucket with 9 teeth $2, Y -F F F - Y () 68 bucket F w/ and side cutters $1, bucket F w/8 teeth and side cutters $1, bucket F w/ and side cutters $1, bucket, F w/8 teeth and side cutters $1, bucket, F w/ and side cutters $2, bucket, F w/9 teeth and side cutters $2, bucket, F w/ and side cutters $2, bucket, F w/9 teeth and side cutters $2,

165 -F F 30 standard floor buckets igh strength side cutters tie into the front edge for better strength and longer life -F F F - () 60 bucket (12.7 ft³) 7 holes/9 spacing $1, bucket with 6 teeth $1, bucket 9 holes/7 spacing $1, bucket (14.1 ft³) 7 holes/10 spacing $1, bucket with 7 teeth $1, bucket (14.8 ft³) 7 holes/10 spacing $1, bucket with 8 teeth $1, bucket (15.4 ft³) 7 holes/11 spacing $1, bucket with 8 teeth $1, bucket (16.7 ft³) 9 holes/9 spacing $1, bucket with 8 teeth $1, bucket (17.6 ft³) 9 holes/9.75 spacing $1, bucket with 9 teeth $2, bucket (18.1 ft³) 9 holes/9.75 spacing $1, bucket with 9 teeth $1, Y -F F F - Y () 68 bucket F w/ and side cutters $1, bucket F w/8 teeth and side cutters $1, bucket F w/ and side cutters $1, bucket, F w/8 teeth and side cutters $1, bucket, F w/ and side cutters $2, bucket, F w/9 teeth and side cutters $1, rices subject to change without notice. ll prices are in dollars.

166 F -F, Y xtreme-uty ucket ptions () olt-on side cutter assembly (pair) (shown) $77.75 ssembly charge to attach bucket edge at factory (net cost per each unit assembled) olt-n dge ssembly contact factory 60 (7 holes, 9 spacing) $ (9 holes, 7 spacing) $ (7 holes, 10 spacing) $ (7 holes, 10 spacing) $ (7 holes, 11 spacing) $ (12 holes, 6 spacing) $ (8 holes, 10 spacing) $ (9 holes, 9 spacing) $ (7 holes, 12 spacing) $ (9 holes, 9.75 spacing) $ (10 holes, 8 spacing) $ (9 holes, 9.75 spacing) $ (9 holes, spacing) $ ooth ar ssembly 60 side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $ side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $1, side cutter mounting tooth bar assembly (standard) $ over the edge side cutter mounting tooth bar (over bolt-on edge) $1,

167 vailable with or without single piece construction universal mount ptional bolt-on universal skid-steer and tractor mounts available ffers maximum production & covers typical wheel bases ollect rocks, bricks & debris allowing the soil to sift through ptional 60 grapple kit for 1.13 diameter tines, opens to 55 arrier pecifications ift apacity perating eight <10,000 lbs. <32,000 lbs. pecifications eight (approx) idth eight epth umber of ines ine pacing ine iameter 680 lbs 66" 22" 43" 22 2" 1.13" 555 lbs 66" 22" 43" 16 3" 1.13" 742 lbs 75" 22" 43" 24 2" 1.13" 625 lbs 75" 22" 43" 18 3" 1.13" 692 lbs 84" 22" 43" 20 3" 1.13" F - : V - () 66 bucket, 2 tine spacing $2, bucket, 3 tine spacing $1, bucket, 2 tine spacing $2, bucket, 3 tine spacing $2, bucket, 3 tine spacing $2, olt-n ounts bolt-on universal kid-teer mount $ () rapple ssembly grapple assembly for kid-teer mounts $2, ydraulic it for rapple 75 hoses with flat face couplers $ hoses with flat face couplers $ F / : / () 75 rock bucket with euro / global mount, 2 tine spacing $2, rock bucket with euro / global mount, 3 tine spacing $1, rock bucket with euro / global mount, 3 tine spacing $6, rock bucket with euro / global mount, 3 tine spacing $6, () ydraulic it for rapple 75 hoses with flat face couplers $ hoses with flat face couplers $ X rices subject to change without notice. ll prices are in dollars.

168 F : : Y : F - : () 55 rock bucket 2 tine spacing $2, ock ucket 3 tine spacing, 1.62 diameter tines () ase 570 pin-on $7, ase 570/570/ $7, ase $8, at / 84 wide 3 tine spacing $8, John eere $8, John eere $7, John eere 244J $6, ew olland $8, Volvo $6, FF Q x 1.63 tine spacing $5, ock ucket J 214 pin-on $8, Y () 66 bucket, 2 tine spacing no mount $1, bucket, 3 tine spacing no mount $1, bucket, 2 tine spacing no mount $1, bucket, 3 tine spacing no mount $1, bucket, 3 tine spacing no mount $1, ydraulic it for rapple () 75 hoses with flat face couplers $ hoses with flat face couplers $ () bolt-on universal loader mount 1.00 diameter pin $ bolt -on universal loader mount 1.25 diameter pin $ ydraulic it for rapple () 75 hoses with flat face couplers $ hoses with flat face couplers $

169 arrier pecifications ift apacity perating eight <9,500 lbs. <11,000 lbs. ear allast s required to maintain full prime mover stability. (ote the shipping weight of your model, then see the operator s manual(s) for your prime mover and loader for ballasting needs. pecifications: ide ischarge ucket odel and ischarge ucket emovable belt cover to keep weight off belt and reduce stalling 13.5 wide belt with.5 tall grouser irect hydraulic drive for conveyor ight or left discharge elt driven by cast steel sprockets ucket edge drilled for bolt on edge o ool adjustment for discharge doors aw ust ischarge ucket aterial agitator to prevent bridging irect hydraulic drive for agitator versus chain and sprocket drive 15 wide belt with 1 tall grouser F - : Y truck apacity (cu. yds) Y () 60 sand bucket $5, sand bucket $7, saw dust bucket $8, saw dust bucket $10, F *aterial erformance ating and ggregate opsoil awdust ulch ilage () eplacement 0.5 x 4.0 edge for 60 bucket (11.25 bolt spacing) $ x 4.0 edge for 72 bucket (11.25 bolt spacing) $ x 4.0 edge for 84 bucket (11.25 bolt spacing) $ eavy uty ption 0.63 x 6.0 edge for 60 bucket (11.25 bolt spacing) $ ange ax ressure 60 and.55 est ood ood oor oor Fair psi 72 and.68 est ood ood oor oor Fair psi 72 awdust 1.34 Fair Fair Fair est est ood psi 84 awdust 1.58 Fair Fair Fair est est ood psi *atings consider the material to be in a typical working condition with respect to moisture content. n most cases as moisture content increases performance will be adversely affected x 6.0 edge for 72 bucket (11.25 bolt spacing) $ x 6.0 edge for 84 bucket (11.25 bolt spacing) $ rices subject to change without notice. ll prices are in dollars.

170 - F: hen ordering a custom oothbar, a oothbar Fitting heet (found on page 161) may be required. oothbar shanks are profiled and spaced differently to adhere to certain bucket specifications (i.e. olt-n edges, olt-ole spacing, etc.) n order to provide a suitable oothbar, detailed specifications must be provided to FF. FF uckets with the FF olt-ole attern (6 centers) and/or FF utting dge are exempt from the oothbar Fitting heet requirement. on-ff buckets a olt-n edge only require the inside width of the bucket and the thickness of the weld-on edge. f you are ordering a oothbar for an FF ucket, simply denote which model you have when ordering. hen selecting an FF oothbar for your bucket, locate a model below that measures in close proximity to the bucket you are ordering for. FF will gather data from the oothbar Fitting heet and customize the oothbar according to those specifications. ustomization price will not be affected. X VY-Y 1.5 (). QY F Y VY. Y VY. () F Y Q xtra eavy-uty oothbar for uckets w/o olt-n dge -1 hanks welded to.75 x 4 edge with cast point 63 oothbar xtra eavy-uty (7 teeth) F $ oothbar xtra eavy-uty (8 teeth) F $ oothbar xtra eavy-uty (9 teeth) F $ oothbar xtra eavy-uty (10 teeth) F $1, hanks welded to.75 x 6 edge with cast point 82 oothbar xtra eavy-uty(10 teeth) F $1, oothbar xtra eavy-uty (12 teeth) F $1, xtra eavy-uty oothbar for uckets olt-n dge -1 hanks welded to.75 x 4 edge with cast point 63 oothbar xtra eavy-uty with (7 teeth) F $ oothbar xtra eavy-uty with (8 teeth) F $ oothbar xtra eavy-uty with (9 teeth) F $1, oothbar xtra eavy-uty with (10 teeth) F $1, xtra eavy-uty oothbar for uckets olt-n dge -1 hanks welded to.75 x 6 edge with cast point 96 oothbar xtra eavy-uty with (12 teeth) F $1, () hanks/eeth 1 shank with replaceable point & roll pin for o F1008 $ shank with replaceable point & roll pin for F1009 $91.59 eplaceable points for 1.5 shank (cast) $13.36 ubberized flex pin $5.40 hanks can be welded directly to ucket 187

171 - VY-Y 1.5 (F). QY F Y VY. Y VY. F Y Q eavy-uty oothbar for uckets w/o olt-n dge F Y Q tandard uty oothbar for uckets w/o olt-n dge () 36 oothbar tandard-uty (5 teeth) F $ oothbar tandard-uty (5 teeth) F $ oothbar tandard-uty (6 teeth) F $ oothbar tandard-uty (6 teeth) F $ oothbar tandard-uty (7 teeth) F $ oothbar tandard-uty (8 teeth) F $ oothbar tandard-uty (9 teeth) F $ tandard uty oothbar for uckets olt-n dge 63 oothbar for uckets with olt-n dge (7 teeth) F $ oothbar for uckets with olt-n dge (8 teeth) F $ oothbar for uckets with olt-n dge (9 teeth) F $ ituations that require a oothbar Fitting heet Found on page 160. hanks/eeth (hanks can be welded directly to ucket) () () 63 oothbar eavy-uty (7 teeth) F $ oothbar eavy-uty (8 teeth) F $ oothbar eavy-uty (9 teeth) F $ oothbar eavy-uty (10 teeth) F $ eavy-uty oothbar for uckets olt-n dge 63 oothbar for uckets with olt-n dge (7 teeth) F $ oothbar for uckets with olt-n dge (8 teeth) F $ oothbar for uckets with olt-n dge (9 teeth) F $1, oothbar for uckets with olt-n dge (10 teeth) F $1, ituations that require a oothbar Fitting heet Found on page 160. hanks/eeth (hanks can be welded directly to ucket) () hank with fabricated replaceable point & roll pin for o F $56.45 hank with fabricated replaceable point & roll pin for F $58.58 eplaceable points for 1.5 shank (fabricated) $13.63 ubberized flex pin $5.40 Y 1 (F). QY F Y VY. Y VY. eld-on hank for oothbar w/o olt-n dge F $64.97 eld-on hank for oothbar w/ olt-n dge F $71.36 eld-on hank for bucket without point F $57.51 eld-on Flush ooth for ucket 1.5 w/ & roll pin F $60.71 eplaceable oint for tandard oothbars F $ oll in $ rices subject to change without notice. ll prices are in dollars.

172 - Q F You do have to fill out the oothbar fitting sheet if: You are fitting a oothbar to an FF ucket You are fitting a oothbar to an FF ucket with olt-on dge You are fitting Y ucket with no olt-on dge (n this situation, you must provide the thickness of the weld-on edge and the inside width of the bucket) You fill out the oothbar fitting sheet if: You are fitting a oothbar for Y non-ff bucket a olt-n dge 189

173 F - lease fax back to ** f center to center dimension for bolt holes is equal for all holes, enter this dimension in ox below. F F F ** * f center to center dimension for bolt holes varies, use spaces below (as needed)to enter these dimensions. F F F 1 F F 1 * F F F (2) F 1 Q F. dditional comments: F... = X... = X o: From: # F & lease fax back to rices subject to change without notice. ll prices are in dollars.

174 191

175 lanetary drive delivers high torque igh rear spoil clearance to prevent recirculation of material rotective shields for hydraulic & electrical components fficient piston drive motor ptional water tank available with adjustable mounting brackets to fit most skid-steer loaders arrier pecifications ift apacity perating eight <10,000 lbs. <20,000 lbs. F - : Y, -.. FY F F - (800) Y pecifications odel # eight ydraulic verall verall laning laning Flow ange (pprox) Flow idth eight idth epth lbs standard gpm 52" 32" 12" 0"-5" lbs high gpm 65" 35" 16" 0"-5" lbs high gpm 65" 35" 18" 0"-5" lbs high gpm 65" 35" 24" 0"-5" lbs high gpm 65" 35" 30" 0"-5" lbs high gpm 65" 35" 40" 0"-5" () tandard Flow hydraulic side-shift/mechanical tilt/depth $10, hydraulic side-shift/tilt/depth $13, Four Function n-ab, igh Flow (requires hydraulic motor) hydraulic side-shift/tilt/depth (18 frame) $17, hydraulic side-shift/tilt/depth $18, hydraulic side-shift/tilt/depth $21, hydraulic side-shift/tilt/depth $22, hydraulic side-shift / tilt / depth $28, hree Function n-ab (right depth, left depth, sideshift) with elector Valve on laner (changes sideshift to tilt), igh Flow (requires hydraulic motor) hydraulic side-shift/tilt/depth (18 frame) $18, hydraulic side-shift/tilt/depth $19, hydraulic side-shift/tilt/depth $22, hydraulic side-shift/tilt/depth $23, hydraulic side-shift / tilt / depth $29, X rices subject to change without notice. ll prices are in dollars.

176 F - cont. Y () 22 to 25 hydraulic motor $1, to 30 hydraulic motor $1, to 44 hydraulic motor $1, Function igh Flow laners nly () obcat, itch itch, ehl, ustang, J, akeuchi, Volvo $ $ John eere $ ubota (must have the ubota ulti-function ontrol it) $ radco ontrol andle ssembly $1, Function with elector Valve igh Flow laners nly obcat,, ehl, J, ustang, Volvo, acker $ John eere $ ubota (must have the ubota ulti-function ontrol it) $ radco ontrol andle ssembly $1, Q.. () 0.50" body with 0.38" ale rain $ " body with 0.38" Female rain $ " body with 0.38" ale rain $ " body with 0.38" Female rain $ " body with 0.25" ale rain $ " body with 0.38" ale rain $ " body with 0.38" Female rain $ " body with 0.50" ale rain $ () 30 gal. niversal ount ank,12v pump with out electrical control box $1, gal. niversal ount ank, 12V pump with electrical control box $1, standard flow slot cutter $1, high flow slot cutter $1, high flow slot cutter $1, high flow slot cutter $2, ose xtension it $ () lectric ontrol ox $ eplacement electric control handle $ concrete picks $ general purpose $ standard drum assembly-standard general purpose pick $2, high flow drum assembly-standard general purpose pick $3, high flow drum assembly-standard general purpose pick $4, high flow drum assembly-standard general purpose pick $5, high flow drum assembly-standard general purpose pick $7, high flow drum assembly-standard general purpose pick $9,

177 ide shifts 24 left or right to cut next to obstacles igh flow models feature planetary gearbox drive for increased torque and durability wo sizes available for standard-flow kid-teers, six sizes available for high-flow kid-teers arrier pecifications ift apacity perating eight <10,000 lbs. <20,000 lbs. pecifications odel # Flow eight (pprox) utting idth utting epth ilt : ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of ideshift ick Qty. ange ange F5412 td 1135 lbs ± F5413 td 1225 lbs ± F5416 igh 1510 lbs ± F5418 igh 1560 lbs ± F5420 igh 1610 lbs ± F5424 igh 1690 lbs ± F5430 igh 1855 lbs ± F5436 igh 2015 lbs ± F - :, V X. F - Y., -. Y F tandard-flow old laner () 12 tandard-flow old laner F $11, tandard-flow old laner F $12, igh-flow old laner (o be used on igh-flow oaders. all FF for availability) 16 igh-flow old laner F $18, igh-flow old laner F $19, igh-flow old laner F $20, igh-flow old laner F $21, igh-flow old laner F $25, igh-flow old laner F $30, X rices subject to change without notice. ll prices are in dollars.

178 cont. F - cont. - Y Y - FF 3-ine old laner lectrical ontrols ontact ustomer ervice at (800) () () tandard ontrol ox $ obcat, ase, J, ew olland, omatsu, and Volvo (14-pin) F $ ase (8-pin) F $ aterpillar X (14-pin) $ aterpillar X (14-pin) $ John eere pre- with 8-button controls (14-pin) F $ John eere with controls & / series (14-pin) $ ubota (must have the ubota ulti-function ontrol it) $ FF 5-ine old laner lectrical ontrols tandard ontrol ox $ ase (14-pin) F $ aterpillar pre- series $ aterpillar / sereis (8-pin) $ omatsu (8-pin) $ Volvo (14-pin) F $ () ater it for old laners F $1, lot utter for igh-flow model old laners F $1, lot utter for igh-flow model old laners F $1, eplacement heel it for old laners F $ tandard sphalt ick F $14.71 eavy-uty ement ick $ line to 3-line onversion it $2, line to 5-line onversion it $2, : hipping weights vary depending on loader mounting and packaging. 195

179 alf or three-quarter yard ptional Flex hute for directing mix to left or right pecifications odel eight (approx) F - ength w/o hute ength w/ hute ().5 yard oncrete huter $2, yard oncrete huter $2, () Flex hute $ arrier pecifications ift apacity perating eight <10,000 lbs. <32,000 lbs. Y F idth eight lbs lbs xcellent attachment for removing concrete on sidewalks, driveways or any construction site nd plates and 1.5 ooth hank are made with high strength -1 steel 1" x 8" wear resistant acal steel tapered cutting edge pecifications odel eight (approx) F - orking idth () oncrete law $2, Y Y () ontact ustomer ervice at (800) orking epth ear pening eight - () eplaceable points for 1-1/2 shank (cast) $13.36 ubberized flex pin $5.40 : hipping weights vary depending on loader mounting and packaging. eight lbs : & V rices subject to change without notice. ll prices are in dollars.

180 Y niversal design picks up buckets and attachments compatible with the world s best known manufacturers with the same class weight wo mechanical back-up safety features J oweratch niversal dvantage he multi-pin grabbing oweratch picks up a range of pin spreads from the best known machine manufacturers within the 5 ton group mini ex (305, 305, 305.5), J50, 145, 153F, 250, 260 oweratch ini ex picks up other buckets in 5 ton range (ase, John eere, omatsu, ubota, akeuchi, Volvo, oosan) ackhoe only (416, 417, 420, 428, 430, 438) - not multi pick up Z F F & 197

181 rices subject to change without notice. ll prices are in dollars. 198 F F & Z

182 J XV/ asily allows operator to change attachments and gain back lost productivity from knocking out pins ttachment changes are faster and safer pring loaded locking mechanism with integrated non-removable locking pin orks in both backhoe and face positions lear visibility of locking mechanism aids secure attachment ast manual couplers for 1-5 ton mini-excavators, backhoe loader coupler (, John eere, akeuchi) J F For machines only Z Vo F ncludes attachment pins and hardware art umber oupler eight inimum ttachment idth - ink -tick * ange (lass 10) 416, 417, 420, 428, 430, lbs/68kg -ink = 8.1" (206mm) tick = 10.1" (256mm) in iameter 1.97" (50mm) & 1.77" (45mm) in pread 13.6" (345mm) oupler Vertical ffset Vo 5.75" (146mm) oupler orizontal ffset o 4.41" (112mm) ook (hell) learance **(in) easurement is radius from pin center ox ection learance **(in) easurement is radius from pin center 2.83" (72mm) 3.23" (82mm) hipping eight (lbs) 188 ist rice $2, * he front and rear of the coupler on the attachment side are different widths. o F F & X 199

183 Z F F & J XV/ cont. J F ncludes attachment pins and hardware ange (300 ini) ange (300 ini) ange (300 ini) ange (400 ini) 301.4, 301.4, 301.5, 301.6, 301.7, , 302.4, 302.5, 302.5, , 303.5, 303.5, 304, 303.5, , 305, 305, 305.5, 305, art umber oupler eight 29lbs/13kg 42lbs/19kg 53lbs/24kg 112lbs/ 51kg inimum ttachment idth * 4.11" (104.5mm) 5.33" (135.5mm) 5.33" (135.5mm) 6.12" (155.5mm) in iameter 1.18" (30mm) 1.38" (35mm) 1.57" (40 mm) 1.77" (45mm) in pread 5.05" (126.5mm) 6.49" (165mm) 7.87" (200mm) 10.26" (260.5mm) oupler Vertical ffset Vo 1.80" (45.6mm) 2.26" (57.5mm) 2.0" (50.9mm) 3.54" (90mm) oupler orizontal ffset o 2.78" (70.7mm) 3.36" (85.4mm) 3.55" (90.1mm) 5.87" (149mm) ook (hell) learance **(in) easurement is radius from 1.85" (47mm)" 1.97" (50mm) 2.61" (55mm) 2.75" (70mm) pin center ox ection learance **(in) easurement is radius from 1.77" (45mm) 2.09" (53mm) 2.48" (63mm) 2.28" (58mm) pin center hipping eight (lbs) ist rice $1, $1, $1, $2, * he front and rear of the coupler on the attachment side are different widths. F J ncludes attachment pins and hardware ange (300 ini) ange (300 ini) J27 J35 art umber oupler eight 44lbs/ 20kg 55lbs/25kg inimum ttachment idth * 5.5" (140.5mm) 5.5" (140.5mm) in iameter 1.38" (35mm) 1.57" (40mm) in pread 7.28" (185mm) 7.28" (185mm) oupler Vertical ffset Vo 3.15" (80mm) 3.82" (97mm) oupler orizontal ffset o 4.21" (107mm) 5.51" (140mm)" ook (hell) learance **(in) easurement is radius from pin center ox ection learance **(in) easurement is radius from pin center ist rice $1, $1, * he front and rear of the coupler on the attachment side are different widths. o 2.11" (53.5mm) 2.30" (58.5mm) 1.89" (48mm) 2.36" (60mm) ift ye ating lbs.(onne) 2,204 (1.0) 3,858 (1.75) hipping eight (lbs) Vo X rices subject to change without notice. ll prices are in dollars.

184 J XV/ cont. J cont. F ange (300 ini) ange (300 ini) ange (300 ini) ange (400 ini) ncludes attachment pins and hardware 014/ art umber oupler eight 33lbs/ 15kg 55lbs/25kg 77lbs/35kg 110lbs/50kg inimum ttachment idth * 4.15" (105.5mm) 4.82" (122.5mm) 4.94" (125.5mm) 5.93" (150.5mm) in iameter 1.18" (30mm) 1.38" (35mm) 1.58" (40mm) 1.78" (45mm) in pread 5.19" (132mm) 7.11" (180.7mm) 7.54" (191.6mm) 9.19" (233.5mm) oupler Vertical ffset Vo 3.22" (82mm) 3.86" (98mm) 3.94" (100mm) 4.69" (119mm) oupler orizontal ffset o 3.89" (99mm) 4.49" (114mm) 5.79" (147mm) 6.30" (160mm) ook (hell) learance **(in) easurement is radius from pin center ox ection learance **(in) easurement is radius from pin center 1.70" (43mm) 2.12" (54mm) 2.30" (58.5mm) 2.49" (63mm) 1.55" (39.5mm) 1.84" (46.5mm) 2.07" (52.5mm) 2.20" (56mm) ift ye ating lbs. (onne) 1,323 (0.6) 2,204 (1.0) 3,858 (1.75) 5,511 (2.5) hipping eight (lbs) Z ist rice $1, $1, $1, $2, * he front and rear of the coupler on the attachment side are different widths. - J XV () andle for and V $35.87 in it for $ in it for $ andle for , , and V $48.53 F in it for $ andle for VXXXXXXXX0 3 $48.99 in it for $ F & 201

185 -, Q aintains loader breakout, dump and rollback hange attachments quickly and easily with the 4-point hook-up system llows clear line of site; operator can see positive hook-up Z arrier pecifications ift apacity perating eight <10,000 lbs. <32,000 lbs. F F & rices subject to change without notice. ll prices are in dollars.

186 Z Z vailable in 84 and 96 ydro-electric controlled angle and tilt, using only one loader valve ngle 30 right or left off center ilt 10 off horizontal both directions ilt indicator visible from operator s seat pecifications eight (approx) Z F - verall idth verall eight verall ength ngle left/right 1300 lbs 84" 30" 37" lbs 96" 30" 37" : Z. V F F. ilt Z Z () 84 dozer blade $6, dozer blade $6, electrical control box required if kid-teer is equipped with attachment electrical controls $ F - (Q F ) () 14 pin obcat $ pin ase, ew olland, Volvo, itch itch, ehl, ustang, omatsu, ubota $ pin John eere $ pin akeuchi $ pin V,, omatsu $ pin John eere $ F F & 203

187 F F uts 4 trees and heavy brush. an cut up to 6 trees as needed ngineered for maximum performance and service life llows operator to mow in both directions and control direction of cut material vailable with multiple motors and mounts to fit 3-10 ton excavators Z F F & pecifications odel xcavator ize utting ousing perating ydraulic umber of utting ressure otational peed (metric ton) idth idth eight w/ mount Flow lade tands apacity F30 tandard lbs 8-28 gpm 4000 psi rpm 8 4 F30 humb eady lbs 8-28 gpm 4000 psi rpm 8 4 F40 humb eady ,225 lbs gpm 5000 psi rpm 10 4 perating weight in metric tons will determine if the F30 or F40 is appropriate. F30 = 3t-6t,.F40 = 6t-10t ift over side capacity at maximum reach at ground level - this is where the attachment will most likely be while it is working. his weight capacity needs to be suitable for the size and type of flail being considered. ometimes a 3.5t excavator, even though it is in the operating weight range, does not have enough lift over side capacity to be able to lift the flail mower safely at max reach. he lift over side at max reach information is difficult to find as many s don t publish this information so sometimes we may need the dealer to assist us in gathering this info. his is often the case with the smaller 3t-4t excavators. uxiliary flow (flow available to the attachment) this will determine the appropriate motor group to use. ase drain is required. F : F Y. V Y. : F Y. F Y ( ) tandard - o humb apacity 30" Flail ower tandard w/ ange " Flail ower tandard w/ ange " Flail ower tandard w/ ange " Flail ower tandard r w/ ange " Flail ower tandard w/ ange * FFX F () $9, $9, $9, $9, $9, " Flail ower tandard w/ ange F 880 $9, humb eady 30" Flail ower w/ ange $9, " Flail ower w/ ange $9, " Flail ower w/ ange $10, " Flail ower w/ ange $10, " Flail ower w/ ange $10, " Flail ower w/ ange F 905 $10, F Y X rices subject to change without notice. ll prices are in dollars.

188 F F cont. F Y ( ) humb eady cont. 40" Flail ower w/ ange " Flail ower w/ ange " Flail ower w/ ange * FFX F () $11, F 1225 $11, $11, " Flail ower w/ ange $11, ( Q - FY F ) obcat 331 (in on) ase 75 / X80 (in on) ase X31 /X36 (in on) ase X50 / 55 (in on) 305 (in on) 307/308 (in on) at 3083 at 580 at Quick itch eere 35 (w/coupler) eere 35 (in on) eere 50 (in on) eere 50 / 60 (w/coupler) eere 75 / 80 / 85 (in on) eere 310J (in on) eith -7 yundai 60 J 3X (in n) lac odel omatsu 78 / 88 (in on) ubota X040 / X151 / X161 / 45 (in on) ubota X40 / X91-3 / X121-3 / 35 (w/coupler) ubota X080 (w/ coupler) ubota X161 (w/ coupler) ubota X90 / X91 / X121 / 35 (in on) ubota 55 / X057 (w/ coupler) akeuchi 035 / 135 / 235 / 228 (in on) akeuchi 070 / 80F / 175 / 180F / 285 (in on) akeuchi 53 / 053 / 145 / 153F / 250 (in on) Volvo 55 Volvo 58 (in on) Volvo 88 (in on) acker euson/ustang 3503 (in on) acker euson/ustang 5003 (in on) Yanmar 50 (w/ 027 coupler) FFX () $ $ $ $ $ $1, $1, $ $ $1, $ $ $ $ $ $ $1, $ $1, $1, $ $ $ $ $ $ $ $ $ $ $1, $ $ $ $ $ Yanmar V in rabber (in on) $ Z F F & 205

189 F F cont. Z () addles for 30 and 40 humb eady Flail owers humb addle (Factory nstall) $ humb addle (Field nstall) $ () lade set for 30" flail mower (includes 16 curved and 8 straight blades) $ lade set for 40" flail mower (includes 20 curved and 10 straight blades) $ olt and nut kit for flail mower (includes 2 bolts and 2 slotted nuts) $78.81 oll pin kit for flail mower (includes 2 roll pins) $8.47 eflector kit for 30" flail mower (includes 1 deflector and hardware) $57.51 eflector kit for 40" flail mower (includes 1 deflector and hardware) $41.54 kid shoe kit (includes 1 skid shoe and hardware) $ earing kit (includes 1 bearing and hardware) $ orsion disc kit (includes 1 torsion disc and hardware) $1, F F & rices subject to change without notice. ll prices are in dollars.

190 F & F &

191 F & F 5,000 to 21,000 pound capacities Full floating pin design at ear load back rest allows for open center for improved visibility Z F F / : F & F F F F F F F F.. Y, F V F F Y F Y F. Y F F VY. F. F F F (F & F) () 60 wide with 2.5 x 6 x 84 top chisel forks (21,000 lb cap) 21,000 lb. cap, 2.25 shaft - uses 2.5 x 6 wide forks J 411/416/426/436 w/ coupler at ar style back rest $7, J x 6 84 forks $5, John eere 444 pin mount $2, ew olland w/ quick coupler $6, Volvo w/quick coupler $7, wide with 2.5 x 6 x 84 bottom chisel forks (21,000 lb cap) J 411 / 416 / 426 / 436 with quick coupler $7, ew olland with quick coupler $7, Volvo with quick coupler $7, & rices subject to change without notice. ll prices are in dollars.

192 F F F & - F F - () tandard pallet fork frame (left and right hand step) $ tandard walk-thru pallet fork frame (bolt on step) $ tandard walk-thru (2" drop) pallet fork frame (bolt on step) $ radco ignature eries (2 ) rop eight allet Frame (left and right hand step) $ radco eries alk-hru Forks $ radco eries (2") rop eight alk-hru Forks $ universal hitch (does not include tines) $ obcat eries $ obcat eries $ tandard allet Fork ines (pair) pallet fork frames continued next page F () 42 tines (4,000 lb.) $ tines (4,000 lb.) $ eavy-uty allet Fork ines (pair) eavy-duty frame designed to handle 4,000 lb. to 6,200 lb. fork capacities rick guard offers strength & smooth surfaces for protection against load damage atented design offers excellent visibility & includes load securing "" ring 42", 48", 60" and 72" tines available ersonalized logo burned into brick guard available on standard model tandard, xtended, alk-hru available alk-hru carriage design has an open frame for easy, safe access to operator compartment on loader pecifications verall eight verall idth 42 tines (6,000 lb.) $ tines (6,000 lb.) $1, tines (6,200 lb.) $1, tines (6,200 lb) $1, F F X ax ine pacing in ine pacing ategory Fork ounting standard width 39" 46" 44" 9" 16" extended width 39" 66" 64" 9" 16" walk-thru 37" 50.5" 44" 9" 16" F F - F - Z F F & 209

193 Z F F & F F cont. F F - F - cont. Value Fork ines (pair) F cont. () 42 tines (3,750 lb.) $ tines (3,750 lb.) $ tines (5,500 lb.) $ tines (5,500 lb.) $ lock ines 1.5 x 2 x 48 set of 6 class $2, x 2 x 48 set of $1, ale pike ssembly (must order pallet fork frame) () 2-spear, mount $ spear, mount $ ow itch ssembly optional tow hitch $ ssembly harge (assemble tines to pallet fork frame at factory) net cost per each unit assembled F F - F F ( F V - ) contact factory () pallet fork assembly with 42 tines $ pallet fork assembly with 48 tines $ () uger mount assembly lass $ spear, mount bale spike assembly - must order pallet fork frame $ ow itch ssembly optional tow hitch $ F & F F - F / F F - () uro / lobal mount 48 wide $ uro / lobal mount 60 wide $ tandard allet Fork ines (pair) F () 42 tines (4,000 lb.) $ tines (4,000 lb.) $ F X rices subject to change without notice. ll prices are in dollars.

194 F F cont. F & F F - F / cont. eavy-uty allet Fork ines (pair) F cont. () 42 tines (6,000 lb.) $ tines (6,000 lb.) $1, tines (6,200 lb.) $1, tines (6,200 lb) $1, Value Fork ines (pair) 42 tines (3,750 lb.) $ tines (3,750 lb.) $ tines (5,500 lb.) $ tines (5,500 lb.) $ lock ines 1.5 x 2 x 48 set of 6 class $2, x 2 x 48 set of $1, ale pike ssembly (must order pallet fork frame) () 2-spear, mount $ spear, mount $ ow itch ssembly optional tow hitch $ ssembly harge (assemble tines to pallet fork frame at factory) net cost per each unit assembled F F - F F F - contact factory () John eere 400/500 tractor loader $ John eere 600/700 tractor loader $ tandard allet Fork ines (pair) F () 42 tines (4,000 lb.) $ tines (4,000 lb.) $ eavy-uty allet Fork ines (pair) 42 tines (6,000 lb.) $ tines (6,000 lb.) $1, tines (6,200 lb.) $1, tines (6,200 lb) $1, Z F F & 211

195 F & Z F F cont. F F - F cont. Value Fork ines (pair) F X F cont. () 42 tines (3,750 lb.) $ tines (3,750 lb.) $ tines (5,500 lb.) $ tines (5,500 lb.) $ lock ines 1.5 x 2 x 48 set of 6 class $2, x 2 x 48 set of $1, ale pike ssembly (must order pallet fork frame) () 2-spear, mount $ spear, mount $ ow itch ssembly optional tow hitch $ ssembly harge (assemble tines to pallet fork frame at factory) net cost per each unit assembled contact factory F F & rices subject to change without notice. ll prices are in dollars.

196 Y F F & arrier pecifications ift apacity perating eight <10,000 lbs <32,000 lbs <10,000 lbs <32,000 lbs <10,000 lbs <32,000 lbs heck capacity and limits of loader before ordering. F Y F () oes nclude ines 48 lass ailstyle allet Forks w/out forks $3, lass ailstyle allet Forks w/out forks $4, lass ailstyle allet Forks w/out forks $4, Y Y ontact ustomer ervice at (800) F F - F 2 F (Y Q F F) eavy duty, lass pallet fork frame for wheel loaders, backhoes and telehandlers with lift capacities of up to 10,000 lbs ack frames available in 48", 60", and 72" widths ines available in 42", 48", and 60" lengths for a variety of applications pecifications - lass Fork arriages odel # eight (approx) ax. ift ap. idth Fits ine ength lbs 10,000 lbs 48 heel & ackhoe oaders lbs 10,000 lbs 60 heel & ackhoe oaders lbs 10,000 lbs 72 heel & ackhoe oaders pecifications - its for lass Forks* odel # eight (pprox.) epth Fork ize lbs x5x lbs x5x lbs x5x60 *ncludes set of 2 forks, only required if purchasing lass Forks : Y F. : F, F F. : VY. Y F () () 2x5x42 lass Fork it FF $1, x5x48 lass Fork it FF $1, x5x60 lass Fork it FF $1, Z F F & 213

197 F cont. F & F F 48 () blank-no mounts 10,000 lb cap, 2.25 shaft $2, at 902/906/908 10,000 lb cap 60mm shaft $2, at / 10,000 lb cap 60mm shaft $2, at / 10,000 lb cap 60mm shaft $3, J 411,416,426,436 w/ coupler uses 2.5 x 6 wide forks $2, J 411/416/426/436 with coupler (21,000 lb cap 2.25 shaft uses 2.5x6 wide forks) $3, J x 6 x 72 forks (forks included) $7, J x 6 x 48 forks (forks included) $7, J x 6 84 forks (forks included) $5, John eere 444 pin mount $2, J 416 hitch 21,400# rated $2, ew olland w/ quick coupler uses 2.5 x 6 wide $2, Volvo w/quick coupler uses 2.5 x 6 wide forks $2, Z F 74 at / 10,000 lb cap 60mm shaft $3, J 411,416,426,436 w/ coupler at ar style back rest $3, ew olland w/ quick coupler $3, Volvo w/quick coupler $3, F & 215

198 F &, 60 & 90 available 10,000 lb capacity igh back fork design allows for down pressure on fork tips to help single out loads check valve allows for a positive lock on material Z, 60 with 2 x 5 x 42 Forks () J x 5 x 42 forks $9, rak 2 x 5 x 42 forks (10,000 lb cap, 2.25 shaft) $9, rak 2x5x60 forks $9, with 2 x 5 x 48 Forks at / 2 x 5 x 60 high back forks $9, anitou 2 x 5 x 60 forks (10,000 lb cap, 2.25 shaft) $9, F F F - F tandard brick guard djustable tines tilizes shaft styles 1.38 x 4.75 x 42 or and 48 fork tines lengths available F & F F - F F () 42 forks, shaft style pallet fork $1, forks, shaft style pallet fork $1, rices subject to change without notice. ll prices are in dollars.

199 F - F F & 4 left and right shift for 8 overall movement 48, 60, 66, & 74 widths available 5,000 lb to 12,000 lb capacities Floating pin & configurations F 48 () at / 10,000 lb cap 60mm $5, ngersoll and V518/V623 6,000 lb cap 2 shaft $5, J 520 5,500 lb cap class $5, J10,000 lb cap class $5, J 10,000 lb cap 2.25 shaft $5, J / radall eries $5, ew olland 10,000 lb cap 2.25 shaft $5, ew olland - Versattach 10,000 lb cap class $5, anitou 10,000 lb cap class $6, ehl ynacarrier $6, at / 10,000 lb cap 60mm shaft $6, J / radall eries $6, Z F F F F 48 () at / 10,000 lb cap 60mm shaft $5, at / 10,000 lb cap 60mm shaft $6, & 217

200 F & F - F 10 left and right tilt, min. 20 overall minimal tilt 48, 60, 66, & 72 widths available 5,000 lb to 12,000 lb capacities ounter balance cylinders hold carriage in position upon a loss of pressure Z F F & 48 () at / 10,000 lb cap 60mm shaft $4, ase 686 6,000 lb 2 shaft $4, ase ,000 lb 2 shaft $4, ngersoll and V62 pre ,000 lb 2.00 shaft $4, J 10,000 lb cap 2 shaft $4, kyrak 10,000 lb cap 2 shaft $4, erex 10,000 lb cap 2 shaft $4, ase 686 6,000 lb 2 shaft $5, at / 10,000 lb 60mm shaft $5, ngersoll and pre shaft $5, J 506 / 508 / $5, John eere 3200/3400 6,000 lb 2 shaft $5, ull 644 / 844 / shaft $5, kyrak & erex 2 shaft $5, J boom mount $5, at / 10,000 lb cap 60mm shaft $5, ase ,000 lb cap 2 shaft $5, ngersoll and V ,000 lb cap 2 shaft $5, J 506/508 10,000 lb 2 shaft $5, ull shaft $5, anitou 10,000 lb cap 2 shaft $5, kyrak $5, X rices subject to change without notice. ll prices are in dollars.

201 F & F 48 () at / 10,000 lb cap 60mm shaft $4, at / 10,000 lb cap 60mm shaft $5, Z 72 available 10,000 lb capacity 50 swing left & right, 100 overall movement ual load check cylinders for maximum safety F F & 219

202 221 F F & Z F & F F cont.

203 Z F & F F cont. F F F 48 Fork ositioner with Forks () at 14, 24 only 2 x 5 x 60 forks 10,000 lb cap 2.25 shaft $8, at 14 only 2 x 5 x 72 forks 10,000 lb cap 2.25 shaft $8, at only 2 x 5 x 48 forks 10,000 lb cap 2.25 shaft $7, J V100 2 x 5 x 48 forks $7, ew olland 50 2 x 4 x 48 forks 8,000 lb cap 2¼ shaft $7, Fork ositioner with Forks at 14, 24 only 2 x 5 x 48 forks 10,000 lb cap 2.25 shaft $9, J 400 eries 2 x 5 x 72 forks $9, J 411, 416, 426, x 5 x 48 forks 10,000 lb cap $9, J x 6.00 x 48 forks $9, ew olland x5x48 forks 10,000 lb cap $9, Volvo x5x48 forks 10,000 lb cap $9, ide-hift Fork ositioner with Forks (10,000 lb. cap) at / 2 x 5 x 48 forks $12, at 14, 24 hitch only 2 x 5 x 60 forks $12, ide-ilt Fork ositioner with Forks (10,000 lb. cap) at 14, 24 hitch only 2 x 5 x 72 forks $12, F F & rices subject to change without notice. ll prices are in dollars.

204 F - F & ypically used for handling pallets of brick and block 8,000 lb. capacity requires four (4) 2 x 2 tines 10,000 lb. capacity requires six (6) 2 x 2 tines Z F - F / () 1.5 x 2 x 48 set of 6 class $2, x 2 x 48 single class (fits radco) $ x 2 x 48 set of 6 J 1.75 pin $3, x 1.5 x 48 set of 6 J 2 pin dia $3, x 1.5 x 48 single J 2 pin dia $ x 2 x 48 single class V $ x 2 x 48 set of 6 J or 6 ew olland 2.25 pin dia $3, x 2 x 48 single J or single ew olland 2.25 pin dia $ F F & 223

205 F - F cont. F - F ont. 10, F () F & () 2 x 5 x 48 pair at 60mm pin dia $1, x 5 x 48 pair at 60mm pin dia extra drop forks, Fabco $1, x 5 x 48 pair J 2.25 pin dia $1, x 5 x 48 pair anitou 2 pin dia $1, x 5 x 48 pair ew olland 2.25 pin dia $1, x 5 x 48 pair kyrak 2 pin dia $1, x 5 x 60 pair at 60mm pin dia $2, x 5 x 60 pair J/ 2.25 pin dia $1, x 5 x 60 single J high back forks 2.25 pin dia $1, x 5 x 60 pair ew olland 2.25 pin dia $1, x 5 x 72 pair at 60mm pin dia $2, x 5 x 72 pair J/ew olland 2.25 pin dia $2, x 5 x 72 pair ull/j 2.00 pin diameter $2, , F () () 2 x 6 x 60 pair ehl 2.50 pin dia $2, x 6 x 72 pair ehl 2.50 pin dia $2, Z F F & 225

206 F & F - F cont. Z F F F - F F 6, F () () 1.75 x 4 x 48 pair J 2 pin $1, x 4 x 60 pair J 520/523, 1.75 shaft $1, x 4 x 84 pair J 520, 1.75 shaft $2, x 4 x 84 pair kyrak, 2 shaft $2, , F () () 2 x 4 x 48 pair at 60mm pin dia $1, x 4 x 48 pair ehl 2 pin dia $1, x 4 x 48 pair J 2.25 pin dia $1, x 4 x 48 pair J 2 pin $1, x 4 x 48 pair ull $1, x 4 x 48 pair ew olland 2.25 pin dia $1, x 4 x 60 pair J 2.25 pin dia $1, x 4 x 60 pair J 2 pin dia $1, x 4 x 60 pair ew olland 2.25 pin dia $1, x 4 x 60 pair kyrak $1, , F () () 2 x 5 x 48 pair Volvo 2 pin dia $1, x 5 x 60 pair at 60mm pin dia $2, x 5 x 60 pair J 2.25 pin dia $1, x 5 x 60 pair ew olland 2.25 pin dia $1, x 5 x 60 single J high back forks 2.25 pin dia single $1, x 5 x 72 pair at 60mm pin dia $2, x 5 x 72 pair J/ 2.25 pin dia $2, x 5 x 72 pair J 2 pin dia $2, x 5 x 72 pair ull $2, , F () () 2.5 x 6 x 84 pair low back 2.25 pin dia $4, & rices subject to change without notice. ll prices are in dollars.

207 F F & ook n Forks ncludes 2 forks x 4 x back height 72 fork shaft and 4 mounting lugs weld onto your bucket lass,,, and V izes range from 48" to 96" depending on class Z F, / () 60 tines (6,200 lb.) $1, tines (6,200 lb) $1, lass 2 x 5 x 48 single class 10,000 lb cap full taper/polish $1, x 4 x 48 pair class 8,000 lb cap $1, x 4 x 60 pair class 8,000 lb cap $1, x 5 x 60 pair class 10,000 lb cap $1, x 5 x 72 pair class 10,000 lb cap $2, F F & 227

208 JZ emoves invasive trees and shrubs of all sizes se to move and place large rocks, boulders and logs; pull and place stakes and fence posts dge pattern facilitates gripping irregular objects deal for farmers, ranchers, urban land management, construction contractors, landscape contractors, timber/ forestry and land conservation pecifications odel tandard eight (approx) verall eight verall ength verall idth ax. Jaw pening ax. ifting eight 516 lbs ,000 lbs* *JZ tm rabbing ool only - refer to prime mover manual for maximum lifting capacity of the machine JZ F - :. JZ tm () tandard JZ tm $3, Y Y ontact ustomer ervice at (800) () () ain ivot in it- ini and tandard JZ tm $ ydraulic ylinder in it - ini and tandard JZ tm $ ydraulic ylinder eal it - ini and tandard JZ tm $37.28 etrofit/replacement kit for rush uard $ rices subject to change without notice. ll prices are in dollars.

209

210 ( Y) atented design withstands the demands of work in scrap handling, recycling, & other tough applications ncludes hardened pins, cushioned cylinder kit & cylinder/hose guard arrier pecifications ift apacity perating eight <5,000 lbs. <9,500 lbs. pecifications odel eight (approx) idth epth rapple pening rapple losed ines ine hickness lbs lbs lbs lbs F - : V : () 72 construction brush grapple $4, construction brush grapple $4, construction brush grapple $5, construction brush grapple $5, equired for onstruction rapples / () 60 ose it $ ose it $ ose it with 90 couplers (use for obcat eries) $ ose it $ ose it $ rices subject to change without notice. ll prices are in dollars.

211 ( Y) pecifications odel : V : atented design withstands the demands of work in scrap handling, recycling, & other tough applications ncludes hardened pins, cushioned cylinder kit & cylinder/hose guard eight (approx) idth epth F - rapple pen rapple losed lbs lbs lbs () 76 construction scrap grapple $4, construction scrap grapple $5, construction scrap grapple $5, equired for onstruction rapples / () 60 ose it $ ose it $ ose it with 90 couplers (use for obcat eries) $ ose it $ ose it $ V () 76 bolt-on edge for construction grapple $ bolt-on edge for construction grapple $ bolt-on edge for construction grapple $ ption: ide plate extension (ustomer to drill holes) F $

212 120 ( Y) he strength and design of the odel 120 grapple make it the ideal attachment for scrap yards, recycling and construction sites Features patented grapple pins ptional bolt on edges, cushioned cylinders, hardened pins and cylinder and hose guards available arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs. pecifications odel # eight idth pen losed epth F5073 1,266 lbs F5078 1,301 lbs F5082 1,329 lbs F5087 1,364 lbs F5273 1,303 lbs F5278 1,514 lbs F5282 1,542 lbs F5287 1,577 lbs : ll wheel loaders must have an supplied flow limiter/reducer type valve installed on the tilt circuit. ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 4000 psi. 120 F - : V : F Y F ncludes ushioned ylinders () 74 crap rapple ucket F $5, crap rapple ucket F $5, crap rapple ucket F $5, crap rapple ucket F $5, F F Y F ncludes ushioned ylinder it, ardened in and ylinder/ose uard () 74 crap rapple ucket F $6, crap rapple ucket F $6, crap rapple ucket F $6, crap rapple ucket F $6, X rices subject to change without notice. ll prices are in dollars.

213 120 F - cont. ontact ustomer ervice at (800) V includes, grade 8 plow bolts, lock washers & nuts () () For F5073 & F5273 (7 holes, 11 spacing) $ For F5078 & F5278 (9 holes, 9 spacing) $ For F5082 & F5282 (9 holes, 9.75 spacing) $ For F5087 & F5287 (14 holes, 6 spacing) FF $ ccessories (dd-ons or replacement parts) ylinder/ose uard it for odel 120 F $ nd late xtensions - Full it for odel 120 & construction F $ : Field installation required on hardened pin, and cylinder hose guard kits - *xclusive to FF uckets eavy-uty oothbar for uckets without olt-n dge For F5073 & F5273 with 8 teeth $ For F5078 & F5278 with 9 teeth For F5082 & F5282 with 10 teeth $ For F5087 & F5287 with 10 teeth eavy-uty oothbar for uckets with olt-n dge For F5073 & F5273 with 8 teeth For F5078 & F5278 with 8 teeth $1, For F5082 & F5282 with 10 teeth $1, For F5087 & F5287 with 10 teeth xtra eavy-uty oothbar for uckets without olt-n dge For F5073 & F5273 with 8 teeth $ For F5078 & F5278 with 9 teeth For F5082 & F5282 with 10 teeth For F5087 & F5287 with 10 teeth xtra eavy-uty oothbar for uckets with olt-n dge For F5073 & F5273 with 8 teeth For F5078 & F5278 with 8 teeth For F5082 & F5282 with 10 teeth For F5087 & F5287 with 10 teeth

214 ccommodates pavers/materials of different shapes and sizes automatically single cylinder powers two grapple arms with rubber gripping pads elf adjusting grapple arms do not require an additional person for positioning ntegrated storage stand pecifications odel # eight ylinder ad ize rip ange lunge epth ax each ift apacity lamp Force lbs 2.5 x 1.25 x x (min) 14 1,500 lbs 1,525 lbs F - () ardscape rapple, niversal $2, eplacement arts it ubber rip ad (wo per nit) $58.58 it ydraulic ylinder in ardware (ne per nit) $9.93 it ubber ump top (ne per nit) $36.21 it ydraulic ylinder eal it (ne per nit) rices subject to change without notice. ll prices are in dollars.

215 VY-Y ( Y) 84" wide ual independent see through grapples ylinder protection VY-Y F / ydraulic hose protection () ase 570X/X, 580/ & / pin on $12, at / $12, John eere 210 pin on $12, J 506/ $12, J Q-fit $14, ew olland 75 in-on tg $12, ew olland Versattach $14, rak $12, VY-Y ( Y) VY-Y brasion resistant cutting edge with punched holes for optional bolt on edges ut away side plate ual arms with po checks to grab uneven loads () 1.00 Y J wide edge group $8, J 520 & wide edge group $8, anitou 90 wide edge group $8, niversal itch 73 wide edge group $7, Y at / edge group $10, ehl ynacarrier edge group $10, radall $8, anitou hitch $10, kyrak edge group $9, Y at / edge group $15,

216 VY-Y F.78 Y () J 409 old style with edge 78 wide $7, Y at 902/906/ wide edge group $7, ase 221/ wide edge group $7, J 407/ wide 1.25 yd edge group $7, J 75 wide 407 / 409 edge group $7, omatsu 65 / 75 / 85 / 95 edge group $7, ew olland wide edge group $7, niversal itch 73 wide edge group $7, Y ase 521 pin on edge group $9, Y at 14/24 96 wide edge group $12, J 416 series lugs 2.25 yd $12, rices subject to change without notice. ll prices are in dollars.

217 130 VY-Y 1.5" x " patented grapple pins reduce torsional force 1.5" x 8.625" heat-treated, greaseable pivot pins ptional patented cushioned and sleeved cylinders: 2.5" x 8"x 1.75" ucket edge drilled for FF replaceable edge unless specified ift apacity arrier pecifications perating eight <10,000 lbs. <18,000 lbs. pecifications odel eight (approx) idth pen losed epth ubic Yards F5283 1,665 lbs yd 3 F5294 1,745 lbs yd 3 : ll wheel loaders must have an supplied flow limiter/reducer type valve installed on the tilt circuit. ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 4000 psi. 130 F / :, F : Y F () 83 crap rapple ucket F $8, crap rapple ucket F $8, Y Y ontact ustomer ervice at (800) V, 8, & () () For F5283 (9 holes, 9.75 spacing) $ For F5294 (15 holes, 6 spacing) FF $ For ptional olt-n dge rill atterns (i.e. ase ole atterns) - all (800) X 237

218 130 VY-Y cont. 130 F, / cont. eavy-uty oothbar for uckets without olt-n dge - xclusive to FF uckets pecifications odel eight (approx) ift apacity eight epth sable ooth () rapple pen For F5283 with 10 teeth $ For F5294 with 10 teeth eavy-uty oothbar for uckets with olt-n dge - xclusive to FF uckets For F5283 with 10 teeth $1, For F5294 with 10 teeth xtra eavy-uty oothbar for uckets without olt-n dge - xclusive to FF uckets For F5283 with 10 teeth For F5294 with 10 teeth For F5283 with 10 teeth For F5294 with 10 teeth F FF - - (800) F nd late xtension - Full it for odel 130 F $ : Field installation required on hardened pin, cushioned cylinder and cylinder hose guard kits arrier pecifications ift apacity perating eight <10,000 lbs. <20,000 lbs. F - xcellent attachment for handling logs, pipes, brush, and other bulky materials 2" x 8" hydraulic cylinder loses to 6" log or pipe ptional 42" & 48" teeth ine ength F lbs 6,400 lbs :, V, F : Y F () og rapple 42 tines F $5, Y Y ontact ustomer ervice at (800) () rices subject to change without notice. ll prices are in dollars.

219 Q - pecifications odel eight (approx) eight ength he Quik ik is the only attachment versatile enough to manage brush, logs, hay bales, rocks, pipe/culverts, as well as standard pallet jobs he base unit with its patented dual hydraulic boom and curved tines allow safe handling of materials such as hay bales, metal cylinders, boulders, culverts, etc. dditional stability is provided because the curved tines wrap around and against irregular-shaped and curved loads ombine the base unit with the optional fork tines and/or brush rake and you have the material handling capability of multiple attachments such as pallet forks, brush grapples, bale spikes, manure forks, and log grapples all in one multipurpose attachment ine idth/ pacing umber of ines rapple pen rapple losed rapple each lbs /3.75" " 23.57" 50.55" Q - F - :, Q - () Quik ik ulti-urpose rapple $4, (choose one) () V / / omatsu ontrol arness $ obcat / / ehl / J / ustang / akeuchi/ Volvo ontrol arness $ John eere ontrol arness $ ire ssembly with ontrol ox $ () 90 ose it $ ake ttachment () rush/anure ake ttachment $1, allet Fork ines 42 allet Fork ines (4,000 lbs rating) $ allet Fork ines (4,000 lbs rating) $ () eplacement ylinder eal it $37.28 urved eplacement ine $

220 vailable in 60, 66, and 72 widths ow profile sides to allow longer pieces of scrap or debris in the bucket F () 60 scrap grapple bucket $3, scrap grapple bucket $3, scrap grapple bucket $3, F & asy handling of scrap pallets and yard waste in recycling applications esigned for tub grinder charging pen tines allow dirt to drop out, which increases tub grinder life F & F () at / $16, at / with enclosed sides $16, rices subject to change without notice. ll prices are in dollars.

221 F ingle grapple to hold paper waste inside the bucket esigned to clamp and hold loose material orks well with any loose material needing secured for transporting or loading 3.25 Y () () J Q-fit 102 wide $12, J Q-fit 102 does not incl. grapple $7, Y () () J 416 edge group $9, Y ( Y) pecifications odel idth ggressive grapples made of high strength steel for maximum performance and durability ylinder guard design protects cylinder while preventing build-up of debris rovides excellent visibility eight (approx) eight pen eight losed ength " 300 lbs 29" 25.5" 30.5" " 315 lbs 29" 25.5" 30.5" " 435 lbs 29" 25.5" 30.5" Y ( Y) F & () 48 brush grapple $2, brush grapple $2, brush grapple $3, ptions 48 bolt-on bar assembly $

222 Y ( Y) pen floor design Features patented grapple pins and cushioned cylinders vailable in 60, 66 and 72 widths arrier pecifications ift apacity perating eight <4,000 lbs. <6,500 lbs. pecifications odel eight (approx) idth epth rapple pening rapple losed ines ine hickness lbs lbs lbs Y ( Y)F - : V : / () 60 utility brush grapple $4, utility brush grapple $4, utility brush grapple $4, equired for tility rapples / () 60 ose it $ ose it $ ose it with 90 couplers (use for obcat eries) $ ose it $ ose it $ rices subject to change without notice. ll prices are in dollars.

223 Y ( Y) brasion resistant cutting edge with punched holes for optional bolt on edges ut away side plate ual arms with po checks to grab uneven loads pecifications odel eight (approx) idth epth rapple pen rapple losed lbs lbs lbs Y ( Y) F - () tility crap rapple ssembly (hose/coupler kit is not included) 60 utility scrap grapple $4, utility scrap grapple $4, utility scrap grapple $4, equired for tility rapples / () 60 ose it $ ose it $ ose it with 90 couplers (use for obcat eries) $ ose it $ ose it $ V () 60 bolt-on edge for utility grapple $ bolt-on edge for utility grapple $ bolt-on edge for utility grapple $

224 F - evels all types of soil by cutting high spots & filing depressions an be used as a carry-all ptional comb breaks up dirt chunks & smooths surface ptional scarifiers dig into packed dirt () 78 land sculptor assembly $2, ptions comb assembly $ scarifier tooth assembly $ bolt-on cutter bar $ rices subject to change without notice. ll prices are in dollars.

225 F 4,000 to 10,000 lb capacities wivel hook with safety latch Fork mounted for easy use xcellent utility tool F 12,000 lb capacity F () ase $1, at / $1, ngersoll and V $1, J series $1, J/ $1, John eere 310 Q $1, anitou (serial # < ) $1, ew olland $1,

226 Y Y Y XY Y V From ractor xisting Valve2 ttachment ractor onverts existing tractor loader to two-function hydraulics XY Y V F () converts existing tractor loader to two-function hydraulics $ rices subject to change without notice. ll prices are in dollars.

227 F pecifications ompact ractors odel idth (overall) eight (overall) epth (overall) rapple pening eight (lbs) ax. ax. perating eight of ractor " 30" 35" 37" ,000 lbs " 30" 35" 37" lbs " 30" 35" 37" ,000 lbs " 30" 35" 37" ,000 lbs : F F : VY : ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 4000 psi. F F rovides excellent visibility oves loose hay & manure and is ideal for moving brush and small branches ingle auxiliary hydraulic circuit ual cylinders eplaceable tines pecifications kid-teer oaders odel ift apacity perating eight <5,000 lbs <8,000 lbs <5,000 lbs <8,000 lbs <5,000 lbs <8,000 lbs <9,000 lbs <11,000 lbs <9,000 lbs <11,000 lbs <10,000 lbs <32,000 lbs <10,000 lbs <32,000 lbs Y () 60 manure fork with grapple $3, manure fork with grapple $3, manure fork with grapple $3, manure fork with grapple $3, F F - Y F () 60 anure Forks for kid-teers** $1, anure Forks for kid-teers** $1, anure Forks for kid-teers** $1, F F / Y F () 84" anure Fork uro-lobal for arge kid-teers** $3, anure Fork uro-lobal for arge kid-teers** $3, ** ee additional specifications for accurate attachment-to-loader configuration X 247

228 Y F cont. F F - / cont. () olt-n rapple (old eparately) olt-n rapple standard hose with couplers $1, olt-n rapple long hose with couplers $1, eplacement ines eplacement ine with nut $83.03 () at / 90 wide $8, anitou 96 wide $8, deal for waste water, manure, feed lots, flood clean-up oves large volumes of snow efficiently ptional pull back kit draws back snow from building, fences & confined areas ubber edge 1 ft x 6 on scraper & pull back pecifications idth odel (overall) eight (overall) epth (overall) F eight (lbs) " 29" " 28" 29" " 28" 29" " 28" 29" 430 () 60 manure push $1, manure push $1, manure push $1, manure push $1, rices subject to change without notice. ll prices are in dollars.

229

230 Y, pecifications odel eight* 36 xcavator 1580 lbs verall idth verall eight verall ength 36, 42 and 72 cutting widths available - 36 and 42" excavators only - 60 kid-steer only and excavator only - 72 kid-steer only hreds up to 12 diameter hardwood trees atent ending ree tabilization uide (36, 421, 422 models only) eversible carbide teeth and claw teeth can easily be interchanged without the need of rebalancing the rotor ynchronous belt drive system eliminates belt and belt drive sprocket slippage eavy duty bent axis variable displacement piston motor utting idth eight w/o ush ver ar ength w/o ush ver ar perating ressure ydraulic Flow () ec. ydraulic umber of eeth xcavator 1600 lbs xcavator - 58" 31.3" 34.3" 42" , xcavtor 2920, " 33" 34.9" 42" , , kid teer 2530 lbs xcavator 2710 lbs omb.** 2980 lbs Forestry 2550 lbs xcavator " 31.3" 34.3" 60" , , kid-teer 2860 lbs Forestry 2880 lbs * oes not include weight of excavator mount for excavator models ** omb.: xcavator and kid teer ote: e highly recommend the purchase of guarding to protect operator and machine from flying debris in harsh forestry and land clearing environments. lease refer to the Forestry uarding section on page 233 for more information. For kid-teer loaders only. F - 44 : hoose ulcher ssembly, ose it, and ooth et. niversal ount included unless otherwise specified. Y () 60 cutting width (3 line) 60 eries ulcher $29, eries ulcher (requires combination mount from xcavator ounts section) $30, cutting width (5 line) 60 eries ulcher $29, eries ulcher $28, X rices subject to change without notice. ll prices are in dollars.

231 , cont. F - cont. 72 cutting width (3 line) Y cont. () 72 eries ulcher $30, cutting width (5 line) 72 eries ulcher $31, eries ulcher $31, ose its (3 line) & () 65 hose kit, 4000 max psi $ hose kit, 4000 max psi $ hose kit, 4000 max psi $ ose its (5 line) 65 hose kit, 4000 max psi $ hose kit, 4000 max psi $ hose kit, 4000 max psi $ hose kit, 6000 max psi $ hose kit, 6000 max psi $ hose kit, 6000 max psi $ oupler ross eference * select from individual couplers listed below (note: case drain coupler required) ase rain uxiliary oor Function #8 oss -ing.25 body male flat face coupler with adapter $ body female flat face $ body male $ body female $ body female $ body male $26.91 Y eversible arbide ooth eversible law ooth Flat Face Quick isconnect oupler ith o. 12 oss -ing ain ower/eturn.50 body male $ body female $ body male $ body female $ body male $ body female $ for 36 ulcher () reversible carbide hammers (26 pieces) $3, reversible claw teeth (26 pieces) $1, for 60 ulcher reversible carbide hammers (44 pieces) $6, reversible claw teeth (44 pieces) $2, X 271

232 Y, cont. F - cont. for 72 ulcher cont. () reversible carbide hammers (54 pieces) $7, reversible claw teeth (54 pieces) $2, eplacement ooth ets reversible carbide hammer (includes 1 hammer) $ reversible claw tooth $58.58 olts bolt 16X $4.78 bolt 16X $4.78 lock washer special $1.22 ase rain elief Valve () For 60 eries only $ For 72 eries only $ il oolers (600 ated) For on eries ulchers only For 60 ulcher Factory nstalled $3, For 60 ulcher ealer nstalled $3, oolers for units manufactured prior to January 1, 2008 dealer $2, installed onvert from 5 line to 3 line coupler system $ il oolers for eries ulchers only For 60 eries Factory nstalled $3, For 60 eries ealer nstalled $3, For 72 eries Factory nstalled $3, For 72 eries ealer nstalled $3, ust choose electrical control box adapter harness for in-cab controls to operate door lectrical ontrol ox ssembly ontrol ox w/ower ead ingle witch $ dapter arness for n-ab ontrol arness dapter F/ 14 in-8 in F $ ire arness dapter John eere $ arness dapter F/ X 14 in-8 in $ arness dapter F/ X 14 in-8 in $ ire arness dapter & eries i Flow $ ire arness dapter omatsu $ ire arness dapter F/J F $ X rices subject to change without notice. ll prices are in dollars.

233 , cont. F - cont. ote: e highly recommend the purchase of guarding to protect operator and machine from flying debris in harsh forestry and land clearing environments. For kid-teer loaders only. () / niversal Front hield $1, Y odel V95-2 omplete ackage: op uard, orking ight, ear rille uard and yd onnection FY X () F8FV2001 $5, op uard it, V eries F ricing pon equest orking ight it (F/) F ricing pon equest ear rille uard. V95-2 F ricing pon equest ydraulic onnection uard it F ricing pon equest V95-2s ef over, it,, V95-2 F ricing pon equest ubota ab uarding Front indow uard - ire, XX080-4, nclosed ab F ricing pon equest 273

234 Y, cont. FY cont. Y eavy-duty formed 3/16 steel plate. asy bolt-on installation no welding. omplete onnect nder ressure () manifold protection. inged guards for manifold access. eavy-duty formed steel plate construction. olt-on design requires no welding. oes not interfere with tie-down hook access or compartment doors. eparture angle of 21 ttaches to heavy duty rear bumper. pper mounts weld to frame. eavy-duty design protects radiator from debris while allowing ample airflow. wings open to allow unhindered access to engine compartment. rotects rear of machine from falling debris. ool-less opening from the inside and out and hinges up for emergency egress. upported by cab frame and held in place using existing rivnuts. aintains top window visibility. ow profile design to avoid tree limbs. ncludes light guards. Filters debris from entering air cooler area. elps prevent overheating issues and prolongs life of coolers. olt-on (hole modification required), no welding required. eplaceable steel mesh screen design. FY eavy duty design to protect cab glass. eplaces side screens for for use in harsh environments. () asev300, V340 & V380 ier 4 ydraulic connection guards, F ricing pon equest ssembly, rear bumper,, F ricing pon equest ear grill guard, / 4F, F ricing pon equest weep kit, /, 90 4F, F ricing pon equest op guard w/ light guards, F ricing pon equest dditional intake screens, V300, F ricing pon equest ide screen kit, / 4F, F ricing pon equest rices subject to change without notice. ll prices are in dollars.

235 , cont. : Y,,,. 36 cutting width Y () 36 eries ulcher gpm $21, eries ulcher gpm $22, cutting width 421 eries ulcher gpm $33, eries ulcher gpm $33, eries ulcher gpm $39, eries ulcher gpm $39, cutting width 601 eries ulcher gpm $37, eries ulcher gpm $37, eries ulcher $28, eries ulcher (combination mount required from ounts) $30, ose its (3 line) & ( F XV) () 65 hose kit, 4000 max psi $ hose kit, 4000 max psi $ hose kit, 4000 max psi $ ose its (5 line) 65 hose kit, 4000 max psi $ hose kit, 4000 max psi $ hose kit, 4000 max psi $ hose kit, 6000 max psi $ hose kit, 6000 max psi $ hose kit, 6000 max psi $ oupler ross eference * select from individual couplers listed below (note: case drain coupler required) ase rain uxiliary oor Function #8 oss -ing.25 body male flat face coupler with adapter $ body female flat face $ body male $ body female $ body female $ body male $26.78 & X Y 275

236 Y,. & ( F XV) cont. () Flat Face Quick isconnect oupler ith o. 12 oss -ing ain ower/eturn.50 body male $ body female $ body male $ body female $ body male $ body female $ eversible arbide ooth eversible law ooth () for 36 ulcher reversible carbide hammers (26 pieces) $3, reversible claw teeth (26 pieces) $1, For 42" ulcher eversible carbide hammers (30 pieces) $4, eversible claw teeth (30 pieces) $1, for 60 ulcher reversible carbide hammers (44 pieces) $6, reversible claw teeth (44 pieces) $2, eplacement ooth ets reversible carbide hammer (includes 1 hammer) $ reversible claw tooth $58.58 olts bolt 16X $4.78 bolt 16X $4.78 lock washer special $1.22 () 36 eries ounts - ontact Factory for ounts ot isted akechi 175/180F $ akechi $1, ubota X080 Quick ttach $ obelco 150 ark-v / 160-ark V $1, obelco 60 ark V / $ obcat $ / $ /312 /313 / $1, $1, J J $1, J J $1, J J 70 / JZ $ J 214 / 214 / 215 / $1, XV X rices subject to change without notice. ll prices are in dollars.

237 , cont. cont. John eere 200 /225 John eere 110 / 120 / 130 / 135 John eere 160 / 590 / 590 / 595 omatsu 200-3,5,6 / 210 / 228 ase X80 ase X130/X135 / / 9010 ase X160 ase X160 with thumb ase X75 / X80 / 9007 / 9007 ase 9030 at 318 / 318 / 320 -ink itachi X 150 itachi X200 / X225 itachi X110 /X110-5 / X100-2,3,5 / X120-2,3,5 / X130 / ZX120 yundai 160-3,7 / 170-3,7 / 180-3,7 / John eere 290 John eere 200 / 225 / 200, with thumb obelco 130-V / 135 obelco 135 omatsu 88-8 omatsu / / / 158 / 158-2,6 omatsu 150 / / 180 ink-elt 2700Q / 160X ink-elt 135 / 130X / 3650Q ink-elt 75 / 1600 / 1600Q / 80 Volvo 140 / 145 Volvo 150 with 6 Quick ttach Volvo 160 with 6 Quick ttach () $1, $1, $1, $1, $ $1, $1, $ $ $1, $1, $1, $1, $1, $ $ $1, $1, $1, $ $1, $1, $1, $1, $ $1, $ $1, Yanmar V075 / V100 / omatsu 88m $ eries ounts - ontact Factory for ounts ot isted ase 9010 / X130 / X $1, ase 9040 / X280 / 9045 / X290 / X240 / $1, ase / 9030 / X210 / X $1, at 322 (-ink) $1, at 311 / 312 / 313 / $1, at $1, at $1, at 325 / (-ink) / 320 / 321 / $1, with Quick ttach $1, oosan X $1, ill ng oupler $1, itachi X200 / X225 / ZX200 / ZX $1, itachi x $1, yundai / $1, X Y 277

238 , cont. Y cont. () J J $1, J J200 / J $1, John eere 160 / 590 / 590 / $1, John eere 200 / $1, obelco 220 / ark V / 250 / $1, obelco 150 / 160-V $1, obelco k 200 V / k 210 / $1, omatsu / / / / 158 / 158-2, $1, omatsu 220-3,5,6,7 / / / $1, omatsu 150 / / $1, inkbelt $1, igercaat $1, Volvo 240 with 1 oupler $3, Volvo $1, () eflector oor ssembly For 60 eries only $ ase rain elief Valve For 36 eries only $ For 60 eries only $ For 72 eries only $ il oolers (600 ated) For on eries ulchers only For 60 ulcher Factory nstalled $3, For 60 ulcher ealer nstalled $3, oolers for units manufactured prior to January 1, 2008 dealer installed $2, onvert from 5 line to 3 line coupler system $ il oolers for eries ulchers only For 60 eries Factory nstalled $3, For 60 eries ealer nstalled $3, For 72 eries Factory nstalled $3, For 72 eries ealer nstalled $3, ust choose electrical control box adapter harness for in-cab controls to operate door lectrical ontrol ox ssembly ontrol ox w/ower ead ingle witch $ dapter arness for n-ab ontrol arness dapter F/ 14 in-8 in F $ ire arness dapter John eere $ arness dapter F/ X 14 in-8 in $ arness dapter F/ X 14 in-8 in $ ire arness dapter & eries i Flow $ ire arness dapter omatsu $ ire arness dapter F/J F $ rices subject to change without notice. ll prices are in dollars.

239 V V anual side shift perates off skid-steer hydraulics oes not mushroom posts o shock load back to skid steer ptional striker plates to match post shape pecifications odel eight (approx) idth eight ydraulic Flow lbs gpm V V F - : V, Y Y -. V (no hoses) () 4800 post driver $7, Y (one required) () 3.5 square collar with striker plate assembly $ square collar with striker plate assembly $ square collar with striker plate assembly $ x 8 square collar with striker plate assembly $ () 80 with.50 body flat face couplers $ with.50 body flat face couplers $ tilt attach hose kit complete with valve package (requires --) $1, ollars () 3 round collar $ square collar $ round collar $ x 6 beam $ round collar $ square collar $ x 8 collar $ square collar $ post dapter $ electrical control box (for use with --) electrical control box assembly is not required if skid-steer is equipped with auxiliary electrical outlet $

240 V fficiently handles clean-up, rock removal and soil preparation Follows ground contour while picking up rocks and debris icks up rocks 1" to 20" in diameter i-directional drum tills up to 2.5" deep pecifications odel eight (approx) orking idth verall idth apacity truck ange ange F lbs yd³ F lbs yd³ : ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 4000 psi. F - ooth hart - Quantity needed ype nside eeth utside eeth F F F arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs. : V : Y F () 66 orking idth reparator F $9, orking idth reparator F $10, Y Y ontact ustomer ervice at (800) () () nside ooth for reparator - ee chart for quantity needed $1.44/each utside ooth for reparator- ee chart for quantity needed $9.38/each FF reparator ecal it $ eplaceable rum eplaceable rum for F3554 F $2, eplaceable rum for F3566 F $2, eplaceable rum for F3576 F $2, rices subject to change without notice. ll prices are in dollars.

241

242 V rooms and finishes soil for seeding and sodding icks up rocks from.75" to 6" in diameter and collects them in the hopper reaks up clods and levels soils asy to dump collected debris, simply raise the loader arms and open shroud hydraulically arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs. pecifications odel # F - : V : pprox. eight orking idth opper apacity ange ange F lbs yd³ F lbs yd³ Y F () 66 utoake F $10, utoake F $11, Y Y ontact ustomer ervice at (800) () rices subject to change without notice. ll prices are in dollars.

243 ines increase digging action for grading and separates debris for site clean-up carifies and levels hard-packed soil when grading perates in a forward direction Features a full-floating design to follow compound grades V arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs. pecifications odel # eight (approx) idth F - : V : eight epth utting idth traight utting idth on 28.5 ngle F lbs F lbs F lbs F lbs Y F () 82 rader ake F $4, rader ake F $4, rader ake F $4, rader ake F $5, Y Y ontact ustomer ervice at (800) () - () eplaceable ine F $ x 1.5 olt $ ylock ut $

244 V X ual independently adjustable gauge wheels allow for skim passes and cutting grades asily removable and reversible end plates for windrowing ure carbide proprietary teeth design, specially shaped to ensure best possible seedbed djustable polyurethane barrier above roller helps to quickly react to soil moisture conditions atent o. 5,505,268 atent o. 6,578,295 Y X F - pecifications odel eight (lbs) Flow ange () ressure ax () orking idth - traight orking 20º X X Y <1,500 (V, 30,.) ().4F (fixed) 4F 408 $7, (manual) $8, (hydraulic angle change) $9, (hydraulic angle change cylinder only) $8, Y >1,500 ().5F (fixed) 5F $7, (manual) $8, (hydraulic) $9, F (fixed) 6F $9, (manual) $9, (hydraulic) $10, X7 (manual) X $10, X7 (hydraulic) X $11, X8 (manual) X $11, X8 (hydraulic X $12, JY () V-, eries, re- eries (8-in eutsch), eries $ obcat (14-in), ase 400 eries, ase (ost 9/1/01), ehl, ubota, akeuchi, ew olland, ustang, ew olland, akeuchi (14-in eutsch), ubota V $ ase X re-9/1/01 (8-in ackard) $ John eere (3-pin eutsch) $ omatsu $ X X rices subject to change without notice. ll prices are in dollars.

245 X cont. Y X F - cont. Y () ontrol box with power lead $ ontrol box with wire harness for pre- (8-pin eutsch) $ ontrol box with wire harness for standard flow attachments on and (8-pin eutsch) $ ontrol box with wire harness for high flow attachments on and (8-pin eutsch) $ ire harness for ubota (with multi-function in cab controls),, obcat, and J (14-pin eutsch) F $ ire harness for (8-pin rectangular) F $ ire harness for John eere (3-pin eutsch) $ ire harness for John eere-8 button (14-pin eutsch) F $ ire harness for John eere control (14-pin eutsch) $ ire harness for omatsu (14-pin eutsch) $ ire harness for omatsu (8-pin eutsch) $ ire harness for (14-pin "" series) $ xtension 60" extension $43.05 Y X F - 3 pecifications odel eight (lbs) ange orking idth - traight orking 15º 3-pt ategory , ,578,295 () -4 (manual) $8, (hydraulic) $8, (manual) $9, (hydraulic) $9, (manual) $10, (hydraulic) $10, $11, $12, ower eeder - for 3-point tractor models only $5, with 3 oint spring tine scarifier mount $6, $5, with 3 oint spring tine scarifier mount $7, V 285

246 V X - V ulverizes soil, removes debris, finish-grades, spreads fill or soil and dethatches pecifications odel # pprox. eight X - V Y <5,000 ower ox ake - irect rive with anual ngle () 72 working width owerake F $9, working width owerake F $10, ower ox ake - irect rive with ydraulic ngle it (factory installed) 72 working width owerake F $10, working width owerake F $12, Y Y ontact ustomer ervice at (800) Y irect-drive motor eliminates chains and sprockets, reducing maintenance eavy-duty frame and carbide teeth increases durability 8.6" bi-directional drum works soil forward and backward heel arms pivot and store in a vertical position idth orking idth eight rum ange () () ontrol box w/ power lead $ ontrol box w/ wire harness for pre- (8-pin eutsch) $ ontrol box w/ wire harness for standard flow attachments on and (8-pin eutsch) $ ontrol box with wire harness for high flow attachments on and (8-pin eutsch) $ ire harness for ubota (w/ multi-function in cab controls),, obcat, and J (14-pin eutsch) F $ ire harness for (8-pin rectangular) F $ ire harness for John eere (3-pin eutsch) $ ire harness for John eere-8 button (14-pin eutsch) F $ ire harness for John eere control (14-pin eutsch) $ ire harness for omatsu (14-pin eutsch) $ ire harness for omatsu (8-pin eutsch) $ ire harness for (14-pin "" series) $ xtension 60" extension $43.05 () ange F5672 & F lbs ft-lb F5690 & F lbs ft-lb arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs. : ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 4000 psi. V X F - : X V ( F - Y. : X,, Y - ydraulic angle kit f/72 & 90 F $1, Floating linkage (ust be on original order with owerake) all rices subject to change without notice. ll prices are in dollars.

247 emove the toil and leave the soil eplaceable pin-on &-230 style teeth for durability and extended life Zinc plated, greaseable, pivot pins with protected grease zerks, and replaceable hardened steel bushings eld-on -ring for numerous applications V pecifications ake idth idth (overall rapple) eight (overall) rapple pening ooth osition F - ength (overall) eight (lbs) varies depending on mount ine pacing 72" 70" 38" 49 25" 27" " 78" 70" 38" 49 25" 27" " 84" 70" 38" 49" 25" 27" " : V : : ue to the variances between different makes and models, oot akes for do not include hoses and couplers. hey must be ordered separately. () 72 oot ake ssembly $5, oot ake ssembly $6, oot ake ssembly $6, () 76" hoses w/.50" Flat Face ouplers $ " hoses w/.50 Flat Face ouplers $ " hoses w/.50 Flat Face ouplers and 90 fittings $ () ucket ooth - 23 eries, ast $13.36 Flex in $5.40 X 287

248 V cont. F : F : () 60 oot ake - niversal ount $2, oot ake - niversal ount $2, oot ake - J400 ount $2, oot ake - in-on ount $2, oot ake - niversal ount $2, () 76" hoses w/.50" Flat Face ouplers $ " hoses w/.50 Flat Face ouplers $ " hoses w/.50 Flat Face ouplers and 90 fittings $ () 72" oot ake ssembly for akeuchi ombo ount $5, oot ake ssembly for J 406, 407 / 321F / 50 / Z-eyer 402 ount $5, " oot ake ssembly for ase 221 / $5, " oot ake ssembly for Volvo $6, " oot ake ssembly for awasaki 45ZV $6, " oot ake ssembly for akeuchi $6, " oot ake ssembly for / $6, " oot ake ssembly for J244J / VV $6, () ucket ooth - 23 eries, ast $13.36 Flex in $ rices subject to change without notice. ll prices are in dollars.

249 cont. F / : () 72 oot ake ssembly - uro lobal ount $6, oot ake ssembly - uro lobal ount $7, () ucket ooth - 23 eries, ast $13.36 Flex in $5.40 V 289

250 V teel planetary drive delivers high torque tandard electro-hydraulic controls, depth controls, and sideshift rotective shields for hydraulic & electrical components olid hardened steel wheels with greasable manifold pins and secluded greased zerks pecifications verall odel idth verall ength F - ax ut epth heel ia. icks Flow eight w/o picks 18 67" 76" 18" 48" to lbs 24 67" 86" 24" 60" to lbs :, Y, &, Y F Y F () 18 depth $17, depth minimum $19, (24 requires a minimum of 30 & a minimum of 2,500 lbs rated operating capacity) Y () 22 to 28 hydraulic motor not compatible with $1, to 35 hydraulic motor $1, to 44 hydraulic motor $1, & () 18 x 2.5 wide general purpose pick $2, x 4.0 wide general purpose pick $2, x 2.5 wide general purpose pick $2, x 4.0 wide general purpose pick $2, Y () 88 hoses.50 flat face couplers $ hoses.50 flat face couplers $ hoses.625 flat face couplers $ hoses.625 flat face couplers $ hoses.75 flat face couplers $ hoses.75 flat face couplers $ ose extension kit $ X rices subject to change without notice. ll prices are in dollars.

251 F - cont. V () complete control box and harness assembly for all skid steers (direct connect from battery to control valve) $ in-cab control box with 14 pin eutsch onnector (use Y with ) $ ontrol arnesses for n-ab ontrols (from attachment to loader arm) 14 pin eutsch onnector ase, ew olland, Volvo, obcat, itch itch akeuchi, omatsu, & radco $ John eere $ akeuchi and omatsu igh Flow (24) $ pin eutsch onnector V,, omatsu $ igh Flow (24) $ /V tandard Flow (18) $ () ater nozzle kit for rock saw $ gal niversal mount tank, 12v pump, with electrical control box $1, gal niversal mount tank, 12v pump, without electrical control box $1, () eplacement icks 50 concrete picks $ general purpose picks $ V oller eveler is standard 84" and comes equipped with an universal skid steer hitch V F F V F - () oller eveler $4, / 291

252 V F F arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs..75" cutting edge ock filtering top grate ear facing steel rippers ptional front comb to smooth out hills pecifications odel eight (approx) idth ipping epth** eight F lbs 60.5 to 6 29 F F F - : F V F- F Y F () Front-ount carifier F $2, ** p to 7.5 maximum ripping depth with skid shoes off (depths may vary on different skid steer models). Fits directly onto skid steer quick-attach (specify make and model when ordering). tandard with 5 teeth and 2 skid shoes. () ipper hank & ooth ssembly $51.45 kid-hoe F $ F / rices subject to change without notice. ll prices are in dollars.

253 F F esigned to remove hay & corn silage from tightly compacted bunkers 96" cutting width to cut next to walls and straight through to back of bunker djustable guides for depth of cut 0 to 19 ft. working height pecifications verall ength each Fixed epth 8' 10' 0 to 3 V F F - () silage defacer 18 to $6, silage defacer short mount for skid steer loaders $6, F F - F () silage defacer with euro / global mount $6, F / 293

254 V / / Fixed or swing configurations available ucket curl feature 12", 16", 18" & 24" buckets available pecifications odel eight idth verall igging igging (approx) each epth Force (fixed) 395 lbs 47.5" 75" 73 3,895 lbs (swing) 535 lbs 47.5" 78" 76 3,800 lbs F : ome skid steer models require a tilt circuit hydraulic relief valve. his cartridge is X F and is required to protect the circuit of the skid steer. Failure to install the cartridge when required can result in damage to the skid steer and will V all radco warranties. : odels 1845 and X units require no additional relief. : odels 4475, 5575, 6675, 7775 and 8875 require J cartridge (J part# ). odels 240, 250, 260, and 270 control valve X for models with serial numbers greater than (J240), (J250), (J260), (J270) and (J280), which require no additional relief. : nits with do not require relief. nits without but with a plug and relief on the tilt spool, require obcat part # to replace the plug. : odels 7600 and 7800 and 2095 and 2105 install ehl part # : nstall relief cartridge ( part # ). / F - : F / FX Y () skid hoe assembly (fixed) $2, swing hoe $4, ucket idth ( Q) () 12 standard (3 teeth) $ standard (4 teeth) $ standard (4 teeth) $ standard (5 teeth) $ () adjustable thumb kit (factory installed) $ adjustable thumb kit (dealer installed) $ n ab ontrols (required for control of swing hoe {second function} electrical control box required if skid steer is equipped with attachment electrical controls $ pin ase, ew olland, Volvo, itch itch $ pin John eere $ pin John eere tandard $ pin V,, omatsu $ pin obcat $ rices subject to change without notice. ll prices are in dollars.

255 V

256 V V arrier pecifications ift apacity perating eight <5,000 lbs. <8,000 lbs. Y F 114 eries - anual ngle () 60 manual angle snow blade $3, manual angle snow blade $3, eries - ydraulic ngle 60 hydraulic angle snow blade $3, hydraulic angle snow blade $3, hydraulic angle snow blade $3, hydraulic angle snow blade $3, Y Y ontact ustomer ervice at (800) eplacement edges - teel and ubber with hardware ptional ubber dge it ydraulically or manually angles 30 in either direction eversible, replaceable wear edge, optional rubber edge djustable skid shoes pring-loaded trip mechanism 7-gauge steel blade pecifications odel eight (approx) idth eight utting ax ngle lbs lbs lbs lbs : he F114 eries now lade is for all skid steer and utility loader models up to 80 hp. ocking bolts (part # 8063) are included for light dirt-moving for skid steers only. ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 4000 psi. 114 F - :, V, :, Y () () rubber edge for snow blade F $ rubber edge for snow blade F $ rubber edge for snow blade F $ rubber edge for snow blade F $ X rices subject to change without notice. ll prices are in dollars.

257 V cont. 114 cont. - cont. () eplacement edges - teel and ubber with hardware eplaceable teel dge it steel edge for snow blade FF $ steel edge for snow blade FF $ steel edge for snow blade FF $ steel edge for snow blade FF $ ngle its manual angle kit for snow blade 1400 series FF $ hydraulic angle kit for snow blade 1400 series FF $ arrier pecifications ift apacity perating eight <10,000 lbs. <20,000 lbs. : heck capacity and limits of skid steer or loader before ordering. dd 1 foot to the carrier width when sizing a blade. ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 4000 psi. Y F ydraulically angles 35 in either direction eplaceable bolt-on wear edge. ptional rubber edge kid shoes with adjustable height einforced 7-gauge steel blade pring-loaded trip mechanism pecifications odel eight (approx) idth eight utting 35 ngle lbs lbs lbs lbs lbs lbs F - / : V. F - Y. :, Y () 84 snow blade $4, snow blade $4, snow blade $4, snow blade $5, snow blade $5, snow blade $5, X V

258 V V cont. - Y Y - ontact ustomer ervice at (800) () () arker it $ eplacement edges - teel and ubber with hardware ptional ubber dge it rubber edge for snow blade F $ rubber edge for snow blade F $ rubber edge for snow blade F $ rubber edge for snow blade F $ rubber edge for snow blade F $ rubber edge for snow blade F $1, eplaceable teel dge it steel edge for snow bade $ steel edge for snow blade $ steel edge for snow blade $ steel edge for snow blade $ steel edge for snow blade $ steel edge for snow blade $ olyurethane dge it polyurethane edge for snow bade $1, polyurethane edge for snow blade $1, polyurethane edge for snow blade $1, polyurethane edge for snow blade $1, polyurethane edge for snow blade $1, polyurethane edge for snow blade $1, op Flap - educes now pillage top flap for snow blade F $ top flap for snow blade F $ top flap for snow blade F $ top flap for snow blade F $ top flap for snow blade F $ top flap for snow blade F $ ydraulic ushion it rotects damage to cylinders hydraulic cushion kit (ncluded on newly purchased models 120 wide and larger) $ rices subject to change without notice. ll prices are in dollars.

259 V 136 arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs. Y F () 84 rip dge now lade $4, rip dge now lade $5, rip dge now lade $5, Y Y ontact ustomer ervice at (800) () () arker it $ ptional ubber dge it rubber edge for snow blade $ rubber edge for snow blade $ rubber edge for snow blade $ ptional olyurethane dge it polyurethane edge for snow blade $1, polyurethane edge for snow blade $1, polyurethane edge for snow blade $1, eplaceable teel dge it steel edge for snow bade $ steel edge for snow blade $ steel edge for snow blade $ op Flap - educes now pillage ydraulically angle 30 in either direction eplaceable bolt-on wear edge kid shoes with adjustable height pring loaded trip edge pecifications odel eight (approx) idth eight epth utting 30 ngle lbs lbs lbs : ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 3500 psi. 136 F - :, V,. :, Y top flap for snow blade F $ top flap for snow blade F $ top flap for snow blade F $ V

260 V V 5700 ydraulically angles 30 in either direction eplaceable bolt-on wear edge. ptional rubber edge kid shoes with adjustable height einforced 7-gauge steel blade pring-loaded trip mechanism - - arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs. : ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 4000 psi. pecifications Y F odel eight (approx) idth eight utting 30 ngle F lbs F lbs F lbs F lbs F lbs F lbs F - / : V. F - Y. : () 84 now lade F $4, now lade F $4, now lade F $4, now lade includes ydraulic ushion it (F1550) required on plows 120 and larger F $4, now lade includes ydraulic ushion it (F1550) required on plows 120 and larger F $4, now lade includes ydraulic ushion it (F1550) required on plows 120 and larger F $5, Y Y ontact ustomer ervice at (800) () () - eplacement edges - teel and ubber with hardware ptional ubber edge it rubber edge for F5784 snow blade F $ rubber edge for F5796 snow blade F $ rubber edge for F5708 snow blade F $ rubber edge for F5720 snow blade F $ rubber edge for F5732 snow blade F $ rubber edge for F5744 snow blade F $1, X rices subject to change without notice. ll prices are in dollars.

261 V 5700 cont. - cont. () eplacement edges - teel and ubber with hardware eplaceable steel edge it steel edge for F5784 snow blade $ steel edge for F5796 snow blade $ steel edge for F5708 snow blade $ steel edge for F5720 snow blade $ steel edge for F5732 snow blade $ steel edge for F5744 snow blade $ olyurethane dge it polyurethane edge for F5784 snow bade $1, polyurethane edge for F5796 snow blade $1, polyurethane edge for F5708 snow blade $1, polyurethane edge for F5720 snow blade $1, polyurethane edge for F5732 snow blade $1, polyurethane edge for F5744 snow blade $1, op Flap (reduces snow spillage) top flap for F5784 snow blade F $ top flap for F5796 snow blade F $ top flap for F5708 snow blade F $ top flap for F5720 snow blade F $ top flap for F5732 snow blade F $ top flap for F5744 snow blade F $ ydraulic ushion it (protects damage to cylinders) ydraulic ushion it (ncluded on newly purchased models 120 wide and greater) $ V

262 V - - V ift apacity arrier pecifications perating eight <9,500 lbs. <11,000 lbs. afety uard wo-stage hydraulic blower throws snow up to 45' lectro/hydraulic, poly-lined chute and deflector einforced wrapper and adjustable skid shoes o case drains required for high-flow models : ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 4000 psi. pecifications odel # eight utting utting uger uger Fan ose epth eight ange (pprox) idth eight otors ia. ia. ange tandard-flow odels lbs ingle lbs ingle lbs ingle lbs ingle lbs ingle lbs ingle lbs ingle lbs ingle lbs ingle lbs ingle igh-flow odels 11072F 1150 lbs ingle lbs ual lbs ual F 1200 lbs ingle lbs ual lbs ual F 1190 lbs ingle lbs ual lbs ual lbs ual lbs ual F - : V : () Y F tandard-flow now lower 48 tandard-flow now lower w/ ange $7, tandard-flow now lower w/ ange $7, tandard-flow now lower w/ ange $7, tandard-flow now lower w/ ange $7, tandard-flow now lower w/ ange $7, tandard-flow now lower w/ ange $8, X rices subject to change without notice. ll prices are in dollars.

263 V F - cont. cont. Y F () tandard-flow now lower cont. 78 tandard-flow now lower w/ ange $7, tandard-flow now lower w/ ange $8, tandard-flow now lower w/ ange $7, tandard-flow now lower w/ ange $8, igh-flow now lower 72 igh-flow now lower ingle otor w/ ange F 1230 $11, igh-flow now lower ual otor w/ ange $12, igh-flow now lower ual otor w/ ange $13, igh-flow now lower ingle otor w/ ange F 1275 $11, igh-flow now lower ual otor w/ ange $12, igh-flow now lower ual otor w/ ange $13, igh-flow now lower ingle otor w/ ange F 1345 $11, igh-flow now lower ual otor w/ ange $13, igh-flow now lower ual otor w/ ange $13, igh-flow now lower ual otor w/ ange $13, igh-flow now lower ual otor w/ ange $14, Y Y ontact ustomer ervice at (800) for available mounts. dditional cost may apply. Y ( ) () () ontrol box with power lead F $ ontrol box with wire harness for pre- (8-pin eutsch) $ ontrol box with wire harness for standard flow attachments on and (8-pin eutsch) $ ontrol box with wire harness for high flow attachments on and (8-pin eutsch) $ ire harness for ubota (w/multi-function in cab controls),, obcat, & J (14-pin eutsch) F $ ire harness for (8-pin rectangular) F $ ire harness for John eere (3-pin eutsch) $ ire harness for John eere-8 button (14-pin eutsch) F $ ire harness for John eere control (14-pin eutsch) $ ire harness for omatsu (14-pin eutsch) $ ire harness for omatsu (8-pin eutsch) $ xtension 60" extension $42.05 () dge ut.38" x 3" x 48" square holes.563" - std flow F $68.16 dge ut.38" x 3" x 60" w/.563" square holes - std flow F $59.13 dge ut.38" x 3" x 72" w/.563" square holes - std flow F $ dge ut.38" x 3" x 78" w/.563" square holes - std flow $ dge ut.38" x 3" x 84" w/.563" square holes - std flow F $ dge ut.5" x 4" x 71.25" w/.563" holes - high flow F $ dge ut.5" x 4" x 77.25" w/.563" holes - high flow $ dge ut.5" x 4" x 83.25" w/.563" holes - high flow F $ dge ut.5" x 4" x 95.25" w/.563" holes - high flow F $ kid hoe F $45.45 () ne iece ruck hute for now lower models 11072, 11078, 11084, (F only) $1, Folding ruck hute for now lower models 11072, 11078, 11084, (F only) $1, ndependent uxiliary ower upply from rear tank mount to 3-point 21.4 gpm at 3000 psi $5, V

264 V V oves large volumes of snow or other loose materials efficiently ut out back plate for better visibility Quickly attaches to all skid-steer, backhoe, utility loader and small wheel loader brands ptional olt-n dge available - - arrier pecifications edium uty ucket ift apacity perating eight <5,000 lbs. <8,000 lbs. eavy uty ucket ift apacity perating eight <9,500 lbs. <11,000 lbs. F - : V : Y F edium-uty now ucket pecifications odel eight eading apacity apacity idth eight epth pprox dge truck eaped lbs yd³ 1.47 yd³ lbs yd³ 1.70 yd³ lbs yd³ 2.36 yd³ lbs yd³ 1.82 yd³ lbs yd³ 2.52 yd³ lbs yd³ 2.67 yd³ () 84 edium-uty now ucket $1, edium-uty now ucket $1, edium-uty now ucket $2, eavy-uty now ucket 96 eavy-uty now ucket $2, eavy-uty now ucket $2, eavy-uty now ucket $2, Y Y ontact ustomer ervice at (800) V () () ncludes, grade 8 plow bolts, lock washers & nuts rilled for FF olt-n dge (oles spaced 6 apart, center to center) For ucket (9 holes, 9.75 spacing) $ For ucket (16 holes, 6 spacing) FF $ For ucket (16 holes, 6 spacing) FF $ For ucket (17 holes, 6 spacing) $ For ucket (17 holes, 6 spacing) $ For ucket (18 holes, 6 spacing) $ rices subject to change without notice. ll prices are in dollars.

265 V 228 (4 F X 4 F) arrier pecifications ift apacity perating eight <11,000 lbs. <32,000 lbs. oves large volumes of snow efficiently. lso ideal for waste water, manure, feed lot and flood cleanup ptional pull back kit draws back snow from buildings, fences and confined areas ptional bucket lip mount available for 12 and 14 models 228 eries (4 ft x 4 ft) now ush pecifications odel ath idth orking verall eight epth eight idth (approx) (4 F X 4 F) F -, /, Y :, VY Y. X. : () 12 ft 228 eries 4x4 now ush $8, ft 228 eries 4x4 now ush $9, ft 228 eries 4x4 now ush $9, ft 228 eries 4x4 now ush $10, () ucket ip ount 0057 / $ ontact ustomer ervice at (800) for pricing and availability of alternative mounts. () hain & inder it / $ () ubber dge its for now ush (ncludes ardware and etaining lates) ubber dge it for 12 now ush $1, ubber dge it for 14 now ush $1, ubber dge it for 16 now ush $1, ubber dge it for 20 now ush $1, now hoe now hoe (1 shoe) $ V

266 V V F oves large volumes of snow efficiently. lso ideal for waste water, manure, feed lot and flood cleanup ptional pull back kit draws back snow from buildings, fences and confined areas ptional bucket lip mount available for 10 models - - arrier pecifications ift apacity perating eight <9,500 lbs. <11,500 lbs. pecifications odel ath idth orking eight F F - epth verall idth :,,, V. VY Y V : eight (approx) " 23.7" 38.1" 77.3" 525 lbs " 23.7" 38.1" 89.3" 570 lbs " 23.7" 38.1" 101.3" 610 lbs " 23.7" 38.1" 125.3" 705 lbs () eries ow rofile now ush $2, eries ow rofile now ush $3, eries ow rofile now ush $3, eries ow rofile now ush $3, () niversal ount 0022 / ncluded ontact ustomer ervice at (800) for pricing and availability of alternative mounts. () ull ack it ithout ubber dge Factory nstalled (ordered with now ush) dd weight to ordered now ush 6 ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ Field nstalled (fter arket it) 6 ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ X rices subject to change without notice. ll prices are in dollars.

267 V F cont. cont. () ull ack it ith ubber dge Factory nstalled (ordered with now ush) dd weight to ordered now ush 6 ull ack it with ubber dge $ ull ack it with ubber dge $ ull ack it with ubber dge $ ull ack it with ubber dge $1, Field nstalled (fter arket it) 6 ull ack it with ubber dge $ ull ack it with ubber dge $ ull ack it with ubber dge $1, ull ack it with ubber dge $1, () ubber dge its (ncludes ardware and etaining lates) 6 ubber dge it for now ush or ullback it $ ubber dge it for now ush or ullback it $ ubber dge it for now ush or ullback it $ ubber dge it for now ush or ullback it $ now hoes tandard uty now hoe (1 shoe) F $ eavy uty now hoe (1 shoe) $ V

268 V V 233 (3 F X 3 F) oves large volumes of snow efficiently. lso ideal for waste water, manure, feed lot and flood cleanup ptional pull back kit draws back snow from buildings, fences and confined areas ptional bucket lip mount available for 10, 12 and 14 models arrier pecifications ift apacity perating eight <11,000 lbs. <20,000 lbs. 233 eries (3ft x 3ft) now ush pecifications odel ath idth orking eight 233 (3 F X 3 F) F -, /, Y epth verall idth eight (approx) lbs lbs lbs lbs - - :,,, V. VY Y V : () eries 3x3 now ush ,220 $3, eries 3x3 now ush ,390 $4, eries 3x3 now ush ,575 $5, eries 3x3 now ush ,745 $5, () niversal ount 0022 / ncluded ontact ustomer ervice at (800) for pricing and availability of alternative mounts. () ull ack it ithout ubber dge Factory nstalled (ordered with now ush) dd weight to ordered now ush 8 ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ ull ack it w/out ubber dge $1, X rices subject to change without notice. ll prices are in dollars.

269 V 233 (3 F X 3 F) F -, /, Y cont. ull ack it ithout ubber dge Field nstalled (fter arket it) () 8 ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ ull ack it w/out ubber dge $1, ull ack it ith ubber dge Factory nstalled (ordered with now ush) dd weight to ordered now ush 8 ull ack it with ubber dge $ ull ack it with ubber dge $1, ull ack it with ubber dge $1, ull ack it with ubber dge $3, Field nstalled (fter arket it) 8 ull ack it with ubber dge $1, ull ack it with ubber dge $1, ull ack it with ubber dge $1, ull ack it with ubber dge $3, () ubber dge its (ncludes ardware and etaining lates) ubber dge its for now ush ubber dge it for 8 now ush $ ubber dge it for 10 now ush $ ubber dge it for 12 now ush $1, ubber dge it for 14 now ush $1, ubber dge its for ullback it ubber dge it for 8 ullback it $ ubber dge it for 10 ullback it $ ubber dge it for 12 ullback it $ ubber dge it for 14 ullback it $ now hoes tandard uty now hoe (1 shoe) F $ eavy uty now hoe (1 shoe) $ V

270 V V oves large volumes of snow efficiently. lso ideal for waste water, manure, feed lot and flood cleanup ptional pull back kit draws back snow from buildings, fences and confined areas - arrier pecifications ift apacity perating eight <2,000 lbs. <4,000 lbs. ompact ractor now ush pecifications odel ath idth orking eight epth verall idth eight (approx) lbs lbs lbs lbs () ompact ractor now ush includes ubber dge 5 ft ompact ractor now ush $1, ft ompact ractor now ush $1, ft ompact ractor now ush $1, ft ompact ractor now ush $2, () ubber dge its (ncludes ardware and etaining lates) ubber dge it for 5 now ush $ ubber dge it for 6 now ush $ ubber dge it for 7 now ush $ ubber dge it for 8 now ush $ rices subject to change without notice. ll prices are in dollars.

271 V oves large volumes of snow efficiently. lso ideal for waste water, manure, feed lot and flood cleanup ptional pull back kit draws back snow from buildings, fences and confined areas V arrier pecifications ift apacity perating eight <4,000 lbs. <8,000 lbs. ompact ractor rip dge odels now ush pecifications odel ath idth ompact ractor rip dge now ush includes teel dge orking eight epth verall idth eight (approx) lbs lbs lbs lbs () 6.5 ft ompact ractor rip dge now ush $2, ft ompact ractor rip dge now ush $2, ft ompact ractor rip dge now ush $3, ft ompact ractor rip dge now ush $3, ull ack it ithout ubber dge Factory nstalled (ordered with now ush) dd weight to ordered now ush () 6.5 ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ ull ack it w/out ubber dge $ Field nstall (fter arket it) 6.5 ull ack it w/out ubber dge for now ush FF 230 $ ull ack it w/out ubber dge for now ush FF 255 $ ull ack it w/out ubber dge for now ush FF 275 $ ull ack it w/out ubber dge for now ush FF 295 $ X

272 V V - cont. ull ack it ith ubber dge cont. Factory nstalled (ordered with now ush) dd weight to ordered now ush () 6.5 ull ack it with ubber dge for now ush $1, ull ack it with ubber dge for now ush $1, ull ack it with ubber dge for now ush $1, ull ack it with ubber dge for now ush $1, Field nstall (fter arket it) 6.5 ull ack it with ubber dge for now ush $1, ull ack it with ubber dge for now ush $1, ull ack it with ubber dge for now ush $1, ull ack it with ubber dge for now ush $1, utting dge its (ncludes ardware) teel dge its for now ush () teel dge it for 6.5 now ush $ teel dge it for 8 now ush $ teel dge it for 9 now ush $ teel dge it for 10 now ush $ ubber dge its for ullback it ubber dge it for 6.5 ullback it $ ubber dge it for 8 ullback it $ ubber dge it for 9 ullback it $ ubber dge it for 10 ullback it $ rices subject to change without notice. ll prices are in dollars.

273 120 V V vailable in seven blade widths vailable with hydraulic sequencing valve or electro-hydraulic valve for independent blade function djustable lade allows for straight, V or scoop positions ngles up to 30 in both directions eversible cutting edge designed with spring loaded trip mechanism V pecifications odel eight (pprox) eight idth (traight) lade floats 5 and tilts 5 for ground contour utting idth at Full V utting idth at Full coop utting idth at ax ngle (30 ) lbs lbs lbs lbs lbs lbs lbs : heck capacity and limits of carrier before ordering. dd 1 foot to the carrier width when sizing a blade. ll replacement hydraulic hoses and fittings must have a minimum rated working pressure of 4000 psi. 120 V F - : V. & F - Y. :, Y Y F () 48 V-now lade, hydraulic only controls $5, V-now lade, hydraulic only controls $5, V-now lade, hydraulic only controls $5, V-now lade, hydraulic only controls $5, V-now lade, hydraulic only controls $5, V-now lade, hydraulic only controls $5, V-now lade, hydraulic only controls $6, V-now lade, hydraulic/electric controls $5, V-now lade, hydraulic/electric controls $5, V-now lade, hydraulic/electric controls $5, V-now lade, hydraulic/electric controls $5, V-now lade, hydraulic/electric controls $6, V-now lade, hydraulic/electric controls $6, V-now lade, hydraulic/electric controls $6, V- X

274 V - - V 120 V cont. 120 V F - cont. Y ( ) () ontrol box with power lead F $ ontrol box with wire harness for pre- (8-pin eutsch) $ ontrol box with wire harness for standard flow attachments on and (8-pin eutsch) $ ontrol box with wire harness for high flow attachments on and (8-pin eutsch) $ ire harness for ubota (with multi-function in cab controls),, obcat, and J (14-pin eutsch) F $ ire harness for (8-pin rectangular) F $ ire harness for John eere (3-pin eutsch) $ ire harness for John eere-8 button (14-pin eutsch) F $ ire harness for John eere control (14-pin eutsch) $ ire harness for omatsu (14-pin eutsch) $ ire arness for obcat (7 in) ire harness for omatsu (8-pin eutsch) $ $ xtension 60" extension $ () ptional olyurethane dge it polyurethane edge it for & V-lade $ polyurethane edge it for & V-lade $ polyurethane edge it for & V-lade $ polyurethane edge it for & V-lade $ polyurethane edge it for & V-lade $ polyurethane edge it for & V-lade $ polyurethane edge it for 12020& V-lade $ eflector it - educes now pillage deflector kit for & V-lade $ deflector kit for & V-lade $ deflector kit for & V-lade $ deflector kit for & V-lade $ deflector kit for & V-lade $ deflector kit for & V-lade $ deflector kit for & V-lade $ eplacement teel dge it steel edge it for & V-lade $ steel edge it for & V-lade $ steel edge it for & V-lade $ steel edge it for & V-lade $ steel edge it for & V-lade $ steel edge it for & V-lade $ steel edge it for & V-lade $ arker it $ ydraulic nly ontrol to ydraulic/lectric onversion it onversion it $ rices subject to change without notice. ll prices are in dollars.

275 tandard flow (26) & igh Flow (30) heel rinds stumps down to 12 below grade with 28 teeth ooth bottom permits cutting from side-to-side and vertical directions 60 range of motion will cover 45 in a single sweep rouser pad stabilization prevents plunge stalls ial adjust swing speed V pecifications odel idth eight ength F - Y () 26 standard flow - requires 26 diameter wheel 16 to 23 flow $6, high flow - requires 30 diameter wheel 29 to 44 flow $8, elow round epth omplete control box and harness assembly for all skid steers (direct connect from battery to control valve) () $ in-cab control box with 14 pin eutsch onnector (use Y with ) $ ontrol arnesses for n-ab ontrols (from attachment to loader arm) 14 pin eutsch onnector ase, ew olland, Volvo, obcat, itch itch akeuchi, omatsu, & radco $ John eere $ pin eutsch onnector V,, omatsu $ at -eries (high flow) 29 to $ at -eries (standard flow) 14 to $ wing rc heel ia. eight lbs " 37" 73" 10" 60 26" " 37" 73" 12" 60 30" :,, Y - () 26 square threaded single-bolt tooth $1, bolt-on shark style tooth $1, square threaded single-bolt tooth $1, bolt-on shark style tooth $1, X - 315

276 V F - cont. Y () (2) 72 x.62 hoses.50 flat face couplers (standard flow) 14 to $ (2) 88 x.62 hoses.50 flat face couplers (standard flow) 14 to $ (2) 88 x.75 hose.50 flat face couplers (high flow) 29 to $ (2) 72 x.75 hoses.625 flat face couplers (high flow) 29 to $ (2) 88 x.75 hoses.625 flat face couplers (high flow) 29 to $ (2) 72 x.75 hoses.75 flat face couplers (high flow) 29 to $ (2) 88 x.75 hoses.75 flat face couplers (high flow) 29 to $ () (28) replacement square tooth kit assembly $ (32) replacement bolt-on shark style tooth $ rices subject to change without notice. ll prices are in dollars.

277

278 - V weepster by aladin, provides high quality sweepers and replacement brushes that are durable enough to perform under the most challenging conditions. weepster is the industry leader in rotary brooms and offers a complete line of sweepers for every prime mover and application. weepster weepers are capable of handling all types of material including fine dirt, gravel, mud, millings and other debris. he only waterless dust mitigation system (patented) igher capacity buckets (22%) equal high performance and increased efficiency (available on selected models) ultiple weeper types: ~ ngle weepers ~ ollector weepers ~ ollector weepers with waterless dust abatement (patented and exclusive to aladin) ~ alk ehind weepers ~ ow ehind weepers ool-less Quick hange ore and many other standard features - ince many of our attachments are customized to your needs, when you place your order you will need to choose your attachment, the mounting, and any options you would like. s you look through the products, notice the red headings in the charts - they will alert you to the choices you need to make. hoose your attachment hoose a mount () Front-ount ydraulic rive rush ead - ll olypropylene rush ange ft hydraulic brush head $2, ft hydraulic brush head $2, ft hydraulic brush head $3, Y ( Q) () ontact ustomer ervice for ounting vailability mounting & swing with hydraulic pump and tank for out front mowers 240 $5, mounting & swing without hydraulic pump and tank for out front mowers 100 $2, he blue information bar will tell you what is included in the price and what you need to choose to order a complete attachment. t may also include other helpful information. - : &, Y : & F 3-. he warning box contains important information pertaining to the attachment and prime mover and/or other safety information. : ounting & swing assembly requires 12 to 16 gpm at 2000 psi to operate sweeper : ust hip Via Flatbed otor Freight, all ustomer ervice for stimate f you have any questions about placing your order, contact ustomer ervice at rices subject to change without notice. ll prices are in dollars.

279 - F - Y V () ngles manually 30 left or right; hydraulic angle kit also available Front required rush widths of 4', 5' and 6' available ses mower lift equires 15 to 30 V pecifications odel verall ngle rush eight idth ype iameter (pprox) ange ange ange ange " anual 26" 380 lbs / " anual 26" 440 lbs " anual 26" 500 lbs F - Y V () : & & Y () Front-ount ydraulic rive rush ead - ll olypropylene rush ange ft hydraulic brush head $2, ft hydraulic brush head $2, ft hydraulic brush head $3, Front-ount ydraulic rive rush ead - olypropylene & ire rush 26 4 ft hydraulic brush head $2, ft hydraulic brush head $2, ft hydraulic brush head $3, Front-ount ydraulic rive rush ead - ll olypropylene rush 26 4 ft hydraulic brush head $2, ft hydraulic brush head $2, ft hydraulic brush head $3, Front-ount ydraulic rive rush ead - olypropylene & ire rush 26 4 ft hydraulic brush head $2, ft hydraulic brush head $2, ft hydraulic brush head $3, : ounting & swing assembly requires 12 to 16 gpm at 2000 psi to operate sweeper Y ( Q) () ontact ustomer ervice for ounting vailability mounting & swing with hydraulic pump and tank for out front mowers 240 $5, mounting & swing without hydraulic pump and tank for out front mowers 100 $2, X

280 - V F - Y V (). () hydraulic angle no valve (for manual angle sweepers only) $ hydraulic angle with electric valve and box $2, ide ount aster heels rior to # fter # urrent roduction side mount caster wheels $ side mount caster wheels $1, irt eflector dirt deflector 26/ $ dirt deflector 26/ $ dirt deflector 26/ $ rices subject to change without notice. ll prices are in dollars.

281 - F - V () echanical rush ead - ll olypropylene rush () 24 4 ft mechanical brush head $1, ft mechanical brush head $2, ft mechanical brush head $2, echanical rush ead - olypropylene & ire rush 24 4 ft mechanical brush head $1, ft mechanical brush head $2, ft mechanical brush head $2, Y ( Q) ontact ustomer ervice for ounting vailability () manual angle mounting & swing for out-front mowers 100 $4, manual angle mounting & swing for walk behind mowers 100 $3, ngles manually 30 left or right; hydraulic angle kit also available hain drive Front required ses mower lift equires 15 to 30 pecifications F - V () odel idth ngle (eft ngle rush eight or ight) ype iameter (pprox) " 30 manual 24" 223 lbs " 30 manual 24" 248 lbs " 30 manual 24" 273 lbs : & & Y () hydraulic angle no valve (for manual angle sweepers only) $ storage stands $ dirt deflector 24-4, $ dirt deflector 4 ft $ dirt deflector 5 ft $ side mount caster wheels $ frame mount caster wheels not available on all mountings $ V

282 - V - Y V () pecifications ngles manually 30 left or right; hydraulic angle kit also available rush drive slips easily out of the core without removing hydraulic lines from the wheel motor ydraulic motor driven from loader s hydraulic system For vehicles without adequate hydraulic systems, independent hydraulic system available odel # idth ngle ype rush iameter eight (approx.) ange ange " hydraulic/manual 26" 380 lbs " hydraulic/manual 26" 440 lbs " hydraulic/manual 26" 500 lbs Y V () - - : &, & Y, Y () iameter rush eads - ll olypropylene rush ange ft hydraulic brush head $5, ft hydraulic brush head $5, ft hydraulic brush head $5, iameter rush eads - olypropylene & ire rush 26 4 ft hydraulic brush head $5, ft hydraulic brush head $5, ft hydraulic brush head $5, iameter rush eads - ll olypropylene rush ange ft hydraulic brush head $5, ft hydraulic brush head $5, ft hydraulic brush head $5, iameter rush eads - olypropylene & ire rush 26 4 ft hydraulic brush head $5, ft hydraulic brush head $5, ft hydraulic brush head $5, X rices subject to change without notice. ll prices are in dollars.

283 - - Y V () cont iameter rush eads - ll olypropylene rush ange 8-15 () 30 4 ft hydraulic brush head $6, ft hydraulic brush head $6, ft hydraulic brush head $6, iameter rush eads - olypropylene & ire rush 30 4 ft hydraulic brush head $6, ft hydraulic brush head $6, ft hydraulic brush head $6, iameter rush eads - ll olypropylene rush ange ft hydraulic brush head $7, ft hydraulic brush head $6, ft hydraulic brush head $6, ft hydraulic brush head $7, iameter rush eads - olypropylene & ire rush 30 4 ft hydraulic brush head $6, ft hydraulic brush head $6, ft hydraulic brush head $6, ft hydraulic brush head $7, Y Y (one required) () manual angle change n/a included hydraulic angle change with electric valve - 12 volt 22 $1, hydraulic angle change with electric valve - 24 volt 2 22 $1, hydraulic angle change cylinder and 72 hoses only 3 10 $ hydraulic angle change cylinder and 144 hoses 4 20 $ hydraulic angle change cylinder only 5 17 $ Y () ontrol box with power lead $ ontrol box with wire harness for pre- (8-pin eutsch) $ ontrol box with wire harness for standard flow attachments on and (8-pin eutsch) $ ontrol box with wire harness for high flow attachments on and (8-pin eutsch) $ wire harness for ubota (with multi-function in cab controls),, obcat, and J (14-pin eutsch) F $ ire harness for (8-pin rectangular) F $ ire harness for John eere (3-pin eutsch) $ ire harness for John eere-8 button (14-pin eutsch) F $ ire harness for John eere control (14-pin eutsch) $ ith wire harness for omatsu (14-pin eutsch) $ ith wire harness for omatsu (8-pin eutsch) $ xtension 60" extension $43.05 X V

284 V Y V () cont. ( Q) ontact ustomer ervice for dditional ounting vailability () universal skid steer mounting J2513 for skid steers under 1300 lb lift capacity 0022 n/a included () conversion kit manual to hydraulic with box $1, conversion kit manual to hydraulic without box $ point mounted hydraulic system with tank, driven pump & pressure relief $3, quick coupler kit for 3-point hydraulic system $ irt eflector rior to # fter # urrent roduction dirt deflector 26/ $ dirt deflector 26/ $ dirt deflector 26/ $ dirt deflector $ ide ount aster heels rior to # fter # urrent roduction side mount caster wheels $ side mount caster wheels $ side mount caster wheels $ side mount caster wheels $ rices subject to change without notice. ll prices are in dollars.

285 - - Y V () ngles manually 30 left or right; hydraulic angle kit also available id or rear required rush widths of 4', 5' and 6' available equires 15 to 25 V pecifications odel verall ngle rush eight idth ype iameter (pprox) ange ange ange ange " anual 26" 380 lbs " anual 26" 440 lbs " anual 26" 500 lbs " anual 30" 490 lbs " anual 30" 550 lbs " anual 30" 610 lbs - Y V () : &, & Y, Y () iameter rush eads - ll olypropylene rush ange ft hydraulic brush head $2, ft hydraulic brush head $2, ft hydraulic brush head $3, iameter rush eads - olypropylene & ire rush 26 4 ft hydraulic brush head $2, ft hydraulic brush head $2, ft hydraulic brush head $3, iameter rush eads - ll olypropylene rush ange ft hydraulic brush head $2, ft hydraulic brush head $2, ft hydraulic brush head $3, iameter rush eads - olypropylene & ire rush 26 4 ft hydraulic brush head $2, ft hydraulic brush head $2, ft hydraulic brush head $3, X

286 - V - - -Y V () cont iameter rush eads - ll olypropylene rush ange 8-15 () 30 5 ft hydraulic brush head $3, ft hydraulic brush head $4, ft hydraulic brush head $4, iameter rush eads - olypropylene & ire rush 30 5 ft hydraulic brush head $3, ft hydraulic brush head $4, ft hydraulic brush head $4, iameter rush eads - ll olypropylene rush ange ft hydraulic brush head $3, ft hydraulic brush head $4, ft hydraulic brush head $4, iameter rush eads - olypropylene & ire rush 30 5 ft hydraulic brush head $3, ft hydraulic brush head $4, ft hydraulic brush head $4, Y (one required) ontact ustomer ervice for ounting vailability () rear mounted hydraulic pump & tank for compact utility tractors 240 $5, mid mounted hydraulic pump & tank for compact utility tractors 240 $4, () hydraulic angle no valve (for manual angle sweepers only) $ hydraulic angle with electric valve and box $2, point mounted hydraulic system with tank, driven pump & pressure relief $3, quick coupler kit for 3-point hydraulic system $ irt eflector rior to # fter # urrent roduction dirt deflector 26/ $ dirt deflector 26/ $ dirt deflector 26/ $ dirt deflector $ ide ount aster heels rior to # fter # urrent roduction side mount caster wheels $ side mount caster wheels $ side mount caster wheels $1, side mount caster wheels $1, rices subject to change without notice. ll prices are in dollars.

287 - - V () ngles manually 30 left or right; riven from rear 540 ncludes steel hood, chain shield, height adjustment chains & mounting pins -haft gearbox allows for reversal of brush rotation on mechanical drive V pecifications odel # idth - V () 30 ngle eight (approx) rush iameter torage tands 4 48" 40" 370 lbs 24" optional 5 60" 52" 430 lbs 24" optional 6 72" 64" 490 lbs 24" optional : & V echanical rush ead - ll olypropylene rush () 24 4 ft mechanical brush head $1, ft mechanical brush head $2, ft mechanical brush head $2, echanical rush ead - olypropylene & ire rush 24 4 ft mechanical brush head $1, ft mechanical brush head $2, ft mechanical brush head $2, & V (required) () ategory 1 3-oint mounting assembly $3, () - hydraulic angle no valve $ storage stands $ side mount caster wheels $

288 - V Y - Y V () igh raise broom for 40 to 70 tractors with quick change core ngles 40 left/right & front/back adjustment aises 38" off ground ydraulic system to power sweeper is standard ptional 180 hood, dust suppression system, manual valve handle extension pecifications odel idth 40 ngle eight (pprox) otors ange " lbs " lbs " lbs " lbs " lbs Y - Y V () - - : & V () , ydraulic rive rush ead - ll olypropylene rush 6 ft hydraulic drive brush head ath at 40 degree angle $6, ft hydraulic drive brush head ath at 40 degree angle $6, ft hydraulic drive brush head ath at 40 degree angle $7, ydraulic rive rush ead - olypropylene and ire rush 6 ft hydraulic drive brush head ath at 40 degree angle $6, ft hydraulic drive brush head ath at 40 degree angle $6, ft hydraulic drive brush head ath at 40 degree angle $7, ydraulic rive rush ead - ll olypropylene ube rush 6 ft hydraulic drive brush head ath at 40 degree angle $6, ft hydraulic drive brush head ath at 40 degree angle $6, ft hydraulic drive brush head ath at 40 degree angle $7, ydraulic rive rush ead - olypropylene and ire ube rush 6 ft hydraulic drive brush head ath at 40 degree angle $6, ft hydraulic drive brush head ath at 40 degree angle $6, ft hydraulic drive brush head ath at 40 degree angle $7, X rices subject to change without notice. ll prices are in dollars.

289 - Y - Y V () cont , ydraulic rive rush ead - ll olypropylene rush () 6 ft hydraulic drive brush head ath at 40 degree angle $7, ft hydraulic drive brush head ath at 40 degree angle $8, ft hydraulic drive brush head ath at 40 degree angle $8, ydraulic rive rush ead - olypropylene and ire rush 6 ft hydraulic drive brush head ath at 40 degree angle $7, ft hydraulic drive brush head ath at 40 degree angle $8, ft hydraulic drive brush head ath at 40 degree angle $8, ydraulic rive rush ead - ll olypropylene ube rush 6 ft hydraulic drive brush head ath at 40 degree angle $7, ft hydraulic drive brush head ath at 40 degree angle $8, ft hydraulic drive brush head ath at 40 degree angle $8, ydraulic rive rush ead - olypropylene and ire ube rush 6 ft hydraulic drive brush head ath at 40 degree angle $7, ft hydraulic drive brush head ath at 40 degree angle $8, ft hydraulic drive brush head ath at 40 degree angle $8, ( Q) ontact ustomer ervice for ounting vailability () tractor mounting assembly with manual lift, swing and run valves V 468 $4, () sight indicator flag $ sight indicator ball $ sprinkler system pump, filter, nozzles $ remote cable valve control for cabs 25 $1, ood Factory nstalled for $ for $ for $ rape eflector ncludes 180 ood Field nstalled for $ for $ for $ V

290 - V Y - 3- V (F) ngles manually 30 left or right; riven from rear 540 ncludes steel hood, chain shield, height adjustment chains & mounting pins -haft gearbox allows for reversal of brush rotation on mechanical drive pecifications odel # idth 30 ngle eight (approx) rush iameter torage tands F5 60" 52" 750 lbs 32" standard F6 72" 64" 850 lbs 32" standard F7 84" 76" 950 lbs 32" standard F8 96" 88" 1,050 lbs 32" standard Y - 3- V (F) - - : &, () echanical rush ead - ll olypropylene rush F 5 ft mechanical brush head F5 750 $5, F 6 ft mechanical brush head F6 850 $5, F 7 ft mechanical brush head F7 950 $6, F 8 ft mechanical brush head F $7, echanical rush ead - olypropylene & ire rush F 5 ft mechanical brush head F5 750 $5, F 6 ft mechanical brush head F6 850 $5, F 7 ft mechanical brush head F7 950 $6, F 8 ft mechanical brush head F $7, Y (one required) () manual angle link 6 included hydraulic angle cylinder & 72 hose no valve, hydraulic couplers not included 20 $ (one required) () at & at 3-oint ounting ssembly n/a included F X rices subject to change without notice. ll prices are in dollars.

291 - Y - 3- V (F) cont. () casters $1, sight indicator flags $ sight indicator balls $ steel dirt deflector F 75 $ rubber dirt deflector flap $ prinkler ystem (select both items below to complete kit) sprinkler system tank 25 gallon with mounting and shut off (at only) $ sprinkler system no tank kit 12v for all lengths $ ood - Factory nstalled for F $ for F $ for F $ for F $ ood - Field nstalled for F $ for F $ for F $ for F $ V

292 - V - - Y - Y V () odel ange rive slips easily out of core without removing hydraulic lines from wheel motor rush core is reversible for even brush wear 32" diameter brush for longer life ngles manually 30 left/right ear mount weep width 5' to 7' ange ange ange ange ange () rush ead with ingle 18 ubic nch otor (18) , ydraulic rive rush ead - ll olypropylene rush Q 5 ft hydraulic drive brush head Q $3, Q 6 ft hydraulic drive brush head Q $3, Q 7 ft hydraulic drive brush head Q $4, Q 8 ft hydraulic drive brush head Q $5, Q 9 ft hydraulic drive brush head Q $7, ydraulic rive rush ead - olypropylene & ire rush Q 5 ft hydraulic drive brush head Q $3, Q 6 ft hydraulic drive brush head Q $3, Q 7 ft hydraulic drive brush head Q $4, Q 8 ft hydraulic drive brush head Q $5, Q 9 ft hydraulic drive brush head Q $7, rush ead with ingle 28 ubic nch otor (28) , ydraulic rive rush ead - ll olypropylene rush Q 5 ft hydraulic drive brush head Q $3, Q 6 ft hydraulic drive brush head Q $3, Q 7 ft hydraulic drive brush head Q $4, Q 8 ft hydraulic drive brush head Q $5, Q 9 ft hydraulic drive brush head Q $7, X idth rush iameter eight (pprox) Q " 32" 1090 lbs Q " 32" 1150 lbs Q " 32" 1210 lbs Q " 32" 1270 lbs Q " 32" 1270 lbs Y - Y V () : &, rices subject to change without notice. ll prices are in dollars.

293 - Y - Y V () cont.. () rush ead with ingle 28 ubic nch otor (28) , cont. ydraulic rive rush ead - olypropylene & ire rush Q 5 ft hydraulic drive brush head Q $3, Q 6 ft hydraulic drive brush head Q $3, Q 7 ft hydraulic drive brush head Q $4, Q 8 ft hydraulic drive brush head Q $5, Q 9 ft hydraulic drive brush head Q $7, rush ead with ual 18 ubic nch otor (18) , ydraulic rive rush ead - ll olypropylene rush Q 5 ft hydraulic drive brush head Q $5, Q 6 ft hydraulic drive brush head Q $5, Q 7 ft hydraulic drive brush head Q $5, Q 8 ft hydraulic drive brush head Q $6, Q 9 ft hydraulic drive brush head Q $8, ydraulic rive rush ead - olypropylene & ire rush Q 5 ft hydraulic drive brush head Q $5, Q 6 ft hydraulic drive brush head Q $5, Q 7 ft hydraulic drive brush head Q $5, Q 8 ft hydraulic drive brush head Q $6, Q 9 ft hydraulic drive brush head Q $8, ( Y) () manual angle link $ ydraulic angle cylinder & 72 hoses - no valve $ (one required) () with broom driven by tractor hydraulics (at ) $2, with 20 gpm hydraulic system for use with 28 & 18 hydraulic motors $5, with boom driven by tractor hydraulics (at ) $2, () steel dirt deflector F 75 $ rubber dirt deflector flap $ prinkler ystem (select both items below to complete kit) sprinkler system tank 25 gallon with mounting and shutoff $ sprinkler system no tank kit 12V for all lengths X $ ood Factory nstalled for $ for $ for $ for $ Field nstalled for $ for $ for $ for $ V

294 - V - - -Y V (Q ) pecifications , rush ead with ingle 18 ubic nch otor (18) - ll olypropylene rush ange () Q 5 ft hydraulic drive brush head $6, Q 6 ft hydraulic drive brush head $6, Q 7 ft hydraulic drive brush head $6, rush ead with ingle otor - olypropylene & ire rush rive slips out of core without removing hydraulic lines from wheel motor rush core is reversible for even brush wear 32" diameter brush for longer life ngles manually 30 left/right Faceted hood design provides maximum strength at ends of the hood hoose poly, wire or poly/wire brush ptional tube brush configurations ncludes skid steer mounting odel # idth 30 otors rush iameter eight (approx.) ange " 54" single 32" " 54" single 32" " 54" dual 32" " 64" single 32" " 64" single 32" " 64" dual 32" " 75" single 32" " 75" single 32" " 75" dual 32" " 85" single 32" " 85" dual 32" 1, Y V (Q ) : &,, Y Q 5 ft hydraulic drive brush head $6, Q 6 ft hydraulic drive brush head $6, Q 7 ft hydraulic drive brush head $6, X rices subject to change without notice. ll prices are in dollars.

295 - -Y V (Q ) cont , rush ead with ingle otor - ll olypropylene rush ange () Q 5 ft hydraulic drive brush head $6, Q 6 ft hydraulic drive brush head $6, Q 7 ft hydraulic drive brush head $6, Q 8 ft hydraulic drive brush head $6, rush ead with ingle otor - olypropylene & ire rush Q 5 ft hydraulic drive brush head $6, Q 6 ft hydraulic drive brush head $6, Q 7 ft hydraulic drive brush head $6, Q 8 ft hydraulic drive brush head $6, , rush ead with ual otor - ll olypropylene rush ange Q 5 ft hydraulic drive brush head $7, Q 6 ft hydraulic drive brush head $7, Q 7 ft hydraulic drive brush head $7, Q 8 ft hydraulic drive brush head $7, rush ead with ual otor - olypropylene & ire rush Q 5 ft hydraulic drive brush head $7, Q 6 ft hydraulic drive brush head $7, Q 7 ft hydraulic drive brush head $7, Q 8 ft hydraulic drive brush head $7, Y Y ( Q) ontact ustomer ervice for ounting nformation on pecific ractors () manual angle change n/a included hydraulic angle change with electric valve 12 volt 22 $1, hydraulic angle change with electric valve 24 volt 2 22 $1, hydraulic angle change cylinder and 72 hoses only 3 10 $ hydraulic angle change cylinder and 144 hoses 4 20 $ hydraulic angle change cylinder only 5 17 $ Y ( Q) () ontrol box with power lead $ ontrol box with wire harness for pre- (8-pin eutsch) $ ontrol box with wire harness for standard flow attachments on and (8-pin eutsch) $ ontrol box with wire harness for high flow attachments on and (8-pin eutsch) $ ire harness for ubota (with multi-function in cab controls),, obcat, and J (14-pin eutsch) F $ ire harness for (8-pin rectangular) F $ ire harness for John eere (3-pin eutsch) $ ire harness for John eere-8 button (14-pin eutsch) F $ ire harness for John eere control (14-pin eutsch) $ ire harness for omatsu (14-pin eutsch) $ ire harness for omatsu (8-pin eutsch) $ " of extra cable for or $43.05 Q X V

296 - V - -Y V (Q ) cont. ( Q) ontact ustomer ervice for dditional ounting vailability () universal skid steer mounting J n/a included X () sight indicator flag $ sight indicator ball $ prinkler its (select system and tank to complete kit) pump filter nozzles sprinkler system fits all nozzles mounts to hood, no tank $ sprinkler system tank 25 gallon with shut-off $ ood - Factory nstalled for Q $ for Q $ for Q $ for Q $ ood - Field nstalled for Q $ for Q $ for Q $ for Q $ rape eflector ncludes 180 ood - Factory nstalled for Q $ for Q $ for Q $ for Q $ rape eflector ncludes 180 ood - Field nstalled for Q $ for Q $ for Q $ for Q $ rices subject to change without notice. ll prices are in dollars.

297 - - Y V () 10 ft & 12 ft wide models available 36" diameter brush ual motor design for high torque Quick change brush without breaking hydraulic lines hird valve required to operate - fourth valve required to operate optional hydraulic angle change arallel linkage allows sweeper to follow ground contours V pecifications anual angle 30 left/right is standard hoose poly, wire or poly/wire brush odel # idth otors rush iameter eight (approx.) ange ange : ust hip Via Flatbed otor Freight, all ustomer ervice for stimate " dual 36" 1943 lbs " dual 36" 1943 lbs " dual 36" 1943 lbs " dual 36" 2332 lbs " dual 36" 2332 lbs Y V () : &, Y () ydraulic rive rush ead - ll olypropylene rush ange 12-30, ange ft hydraulic drive brush head $16, ft hydraulic drive brush head $17, ydraulic rive rush ead - olypropylene and ire rush 10 ft hydraulic drive brush head $16, ft hydraulic drive brush head $17, ydraulic rive rush ead - ll olypropylene rush ange 18-45, ange ft hydraulic drive brush head $16, ft hydraulic drive brush head $17, ydraulic rive rush ead - olypropylene and ire rush 10 ft hydraulic drive brush head $16, ft hydraulic drive brush head $17, ydraulic rive rush ead - ll olypropylene rush ange 24-60, ange ft hydraulic drive brush head $16, ft hydraulic drive brush head $17, ydraulic rive rush ead - olypropylene and ire rush 10 ft hydraulic drive brush head $16, ft hydraulic drive brush head $17, X - 337

298 - V - - Y V () cont. Y Y ( Q) () manual angle change 15 $ hydraulic angle change with electric valve - 12 volt electric valve and control 40 $2, hydraulic angle change with electric valve - 24 volt electric valve and control 2 40 $2, hydraulic angle change cylinder and 72 hoses only 3 10 $ hydraulic angle change cylinder and 144 hoses no valve 4 30 $ hydraulic angle change cylinder only 5 17 $ ft of extra cable for or $ ( Q) ontact ustomer ervice for ounting vailability () mounting assembly varies n/a varies () case drain kit for loaders with more than 750 back pressure at $ prinkler ystems - Factory nstalled (order the tank and pump to complete the system) sprinkler system tank 85 gallon with mounting and shut-off $2, ft & 12ft sprinkler system pump, filter, nozzles, 24 volt $1, prinkler ystems - Field nstalled sprinkler system tank 85 gallon with mounting and shut-off $2, ft & 12ft sprinkler system pump, filter, nozzles, 12 volt $1, ft & 12ft sprinkler system pump, filter, nozzles, 24 volt $1, ood - Factory nstalled for $ for $ ood - Field nstalled for $ for $ rape eflector ncludes 180 ood - Factory nstalled for $1, for $1, rape eflector ncludes 180 ood - Field nstalled for $1, for $1, rices subject to change without notice. ll prices are in dollars.

299 - - Y V () pecifications odel # verall eight verall 0 ngle verall 0 ngle weeping 0 ngle ffset to rail 35 ngle 36" diameter brush with quick-change core igh speed brush wafers and casters ydraulically-controlled air deflector to direct swept material uper-duty swing design inkage follows ground contour 12, 14, & 16 foot widths w/ 35 max. articulation ffset to ead 35 ngle () ote: all ustomer ervice for pecific Flow, ressure, and peed Values ange 11.9/11.9 cu in otors ydraulic rive rush ead - ll olypropylene rush 12 ft high speed hydraulic drive brush head $29, ft high speed hydraulic drive brush head $31, ft high speed hydraulic drive brush head $33, verall 35 ngle verall 35 ngle 1 - X weeping 35 ngle eight (approx) lbs Flow ange () ressure ange () " 85.1" 144.0" 89.4" 56.3" 138.8" 117.4" 117.3" " " 66.1" 158.5" 124.3" " : ual hydraulic motor drive driven from carrier hydraulic system with range of combinations to accommodate flow and pressures from carrier between and rush speeds and available torque at brush will vary with flow and pressure available. ydraulic angle standard. ote: hydraulic system included in standard package (see ption section for optional hydraulic system if needed). tandard package presumes carrier will provide hydraulic power and control valves (3 required). ydraulic hoses from carrier to sweeper assembly not included. ust hip Via Flatbed otor Freight, all ustomer ervice for stimate - Y V () : &, Y : & F 3-. V

300 - V Y V () cont. ydraulic rive rush ead - olypropylene and ire rush () 12 ft high speed hydraulic drive brush head $29, ft high speed hydraulic drive brush head $31, ft high speed hydraulic drive brush head $33, ydraulic rive rush ead - ll olypropylene rush ange 11.9/23.9 cu in otors 12 ft high speed hydraulic drive brush head $30, ft high speed hydraulic drive brush head $31, ft high speed hydraulic drive brush head $33, ydraulic rive rush ead - olypropylene and ire rush ange 11.9/23.9 cu in otors 12 ft high speed hydraulic drive brush head $30, ft high speed hydraulic drive brush head $31, ft high speed hydraulic drive brush head $33, ydraulic rive rush ead - ll olypropylene rush ange 23.9/23.9 cu in otors 12 ft high speed hydraulic drive brush head $30, ft high speed hydraulic drive brush head $31, ft high speed hydraulic drive brush head $33, ydraulic rive rush ead - olypropylene and ire rush 12 ft high speed hydraulic drive brush head $30, ft high speed hydraulic drive brush head $31, ft high speed hydraulic drive brush head $33, ( Q) ontact ustomer ervice for ounting vailability () ounting ssembly (3- itch or ) / included ounting ssembly (eneral ruck low ount lank for ustom odification) $3, ounting ssembly (pecific oader, Quick ttach, low itch, as available) ydraulic ontrol ackage Y ( Q) () varies lectrical control boxes with wire harness for in-cab installation by customer to control left/right angle and up/down deflector. ncludes hose replacements for brush head. oses are not included from hydraulic control package to carrier. ote: this kit is ot required if optional ydraulic ower ack below is selected. 12 V rush ead x $2, V rush ead 2 x $2, ydraulic angle change cylinder only 5 x $1, ydraulic ower ack -riven 3- at ounted ydraulic ystem x $18, ncludes -mounted pump, hydraulic oil cooler, and ydraulic ontrol ackage listed above. ump output as follows: 540 arrier peed 1000 arrier peed rices subject to change without notice. ll prices are in dollars.

301 - - Y V () pecifications odel # idth otors 32" bristles extend brush life rive slips out of core without removing hydraulic lines from wheel motor rush core is reversible for even brush wear owered by hydraulic motors mounted inside brush frame hird valve required to operate - fourth valve required to operate optional hydraulic angle change arallel linkage with casters allows sweeper to follow ground contours anual angle 30 left/right is standard hoose poly, wire or poly/wire brush asters, standard rush iameter eight (approx.) ange ange " dual 32" 1288 lbs " dual 32" 1,338 lbs V - Y V () : &, Y ydraulic rive rush ead - ll olypropylene rush () Q 8 ft hydraulic drive brush head $13, Q 9 ft hydraulic drive brush head $14, ydraulic rive rush ead - olypropylene and ire rush Q 8 ft hydraulic drive brush head $13, Q 9 ft hydraulic drive brush head $14, Y Y (one required) () manual angle change 15 $ hydraulic angle change with electric valve - 12 volt electric valve and control 40 $1, hydraulic angle change with electric valve - 24 volt electric valve and control 2 40 $1, hydraulic angle change cylinder and 72 hoses only 3 10 $ hydraulic angle change cylinder and 144 hoses no valve 4 30 $ hydraulic angle change cylinder only 5 17 $ ft of extra cable $ X

302 - V - - Y V () ( Q) ontact ustomer ervice for ricing & ount () mounting assembly F1661 n/a varies () storage stands included sight indicator flag $ sight indicator ball $ aster ptions swing etc with heavy-duty tapered roller bearing casters n/a $ swing etc with heavy-duty solid caster wheels 30 $1, prinkler its (select one system and one tank to complete a kit) sprinkler system fits all nozzles and mounts to hood 12 volt $ sprinkler system fits all nozzles and mounts to hood 24 volt $ sprinkler system tank 25 gallon with mounting and shut-off $ sprinkler system tank 85 gallon with mounting and shut-off $2, ndependent ydraulic ystem ump rive from rear tank mount to 3-oint 20 with pressure relief $3, quick coupler kit for 3-oint hydraulic system $ ood - Factory nstalled for Q $ for Q $ ood - Field nstalled for Q $ for Q $ rape eflector ncludes 180 ood - Factory nstalled for Q $ for Q $ rape eflector ncludes 180 ood - Field nstalled for Q $ for Q $ rices subject to change without notice. ll prices are in dollars.

303 Y - Y V (/) odel ange - rive slips easily out of core without removing hydraulic lines from wheel motor(s) rush core is reversible for even brush wear 32" diameter brush for longer life ngles manually 30 left/right Front mount ange ange ange weep width for is 5' to 7', is 5' to 8' ange ange () , ydraulic rive rush ead - ll olypropylene rush Q 5 ft hydraulic drive brush head Q $3, Q 6 ft hydraulic drive brush head Q $3, Q 7 ft hydraulic drive brush head Q $4, Q 8 ft hydraulic drive brush head Q $5, Q 9 ft hydraulic drive brush head Q $7, ydraulic rive rush ead - olypropylene & ire rush Q 5 ft hydraulic drive brush head Q $3, Q 6 ft hydraulic drive brush head Q $3, Q 7 ft hydraulic drive brush head Q $4, Q 8 ft hydraulic drive brush head Q $5, Q 9 ft hydraulic drive brush head Q $7, X idth rush iameter eight (pprox) Q " 32" 1090 lbs Q " 32" 1150 lbs Q " 32" 1210 lbs Q " 32" 1270 lbs Q " 32" 1270 lbs Y - Y V (/) : &, Y, V

304 - V - - Y - Y V (/) cont , ydraulic rive rush ead - ll olypropylene rush () Q 5 ft hydraulic drive brush head Q $3, Q 6 ft hydraulic drive brush head Q $3, Q 7 ft hydraulic drive brush head Q $4, Q 8 ft hydraulic drive brush head Q $5, Q 9 ft hydraulic drive brush head Q $7, , ydraulic rive rush ead - olypropylene & ire rush Q 5 ft hydraulic drive brush head Q $3, Q 6 ft hydraulic drive brush head Q $3, Q 7 ft hydraulic drive brush head Q $4, Q 8 ft hydraulic drive brush head Q $5, Q 9 ft hydraulic drive brush head Q $7, , ydraulic rive rush ead - ll olypropylene rush Q 5 ft hydraulic drive brush head Q $5, Q 6 ft hydraulic drive brush head Q $5, Q 7 ft hydraulic drive brush head Q $5, Q 8 ft hydraulic drive brush head Q $6, Q 9 ft hydraulic drive brush head Q $8, ydraulic rive rush ead - olypropylene & ire rush Q 5 ft hydraulic drive brush head Q $5, Q 6 ft hydraulic drive brush head Q $5, Q 7 ft hydraulic drive brush head Q $5, Q 8 ft hydraulic drive brush head Q $6, Q 9 ft hydraulic drive brush head Q $8, Y ( Q) eavy uty late ype wing ecommended when sweeping at less than a 30 degree angle () offsets brush to the side, brush is angled $1, cissor ype wing brush stays centered on vehicle when angle 30 degrees left or right $2, ( Q) ontact ustomer ervice for ounting vailability () rear driven (standard) n/a $ front crankshaft driven (not available for all tractors) F n/a included mid driven (available for limited tractors) n/a included ( Q) ontact ustomer ervice for ounting vailability ractor ounting ssembly with ydraulic ystem - ump, ank & Valve ption () with manual lift, swing and run valves (not available for cab tractors) V 468 $4, with electric run valve for F mountings (lift & swing operated from tractor remotes) V 468 $4, with electric valves lift, swing and run valves V 468 $6, with no valves rush turned off with (lift & swing operated from tractor remotes) V 468 $4, X rices subject to change without notice. ll prices are in dollars.

305 - Y - Y V (/) ( Q) cont. ontact ustomer ervice for ounting vailability ractor ounting ssembly perated from ractor ydraulic ystem, Valve ption nly () with manual lift, swing and run valves (not available for cab tractors) V 468 $4, with electric run valve (lift and swing operated from tractor remotes) V 468 $4, with electric valves lift, swing and run valves V 468 $5, with no valves (run lift and swing operated with tractor remotes) V 468 $3, () sight indicator flags $ sight indicators red balls $ bolt on stand kit front/rear $ prinkler ystem (select one system and tank to complete kit) sprinkler system fits all nozzles - mounts to hood, no tank $ sprinkler system tank 25 gallon with shut-off $ gallon 3-oint mounted water tank $3, ood - Factory nstalled for Q $ for Q $ for Q $ for Q $ for Q $ ood - Field nstalled for Q $ for Q $ for Q $ for Q $ for Q $ rape eflector ncludes 180 ood - Factory nstalled for Q $ for Q $ for Q $ for Q $ for Q $ rape eflector ncludes 180 ood - Field nstalled for Q $ for Q $ for Q $ for Q $ for Q $ V

306 V Y - Y V (Q) pecifications odel # idth 30 otors rush iameter eight (approx.) ange " 54" single 32" " 54" single 32" " 54" dual 32" " 64" single 32" " 64" single 32" " 64" dual 32" " 75" single 32" " 75" single 32" " 75" dual 32" " 85" single 32" " 85" dual 32" 1, rive slips out of core without removing hydraulic lines from wheel motor rush core is reversible for even brush wear 32" diameter brush for longer life ngles manually 30 left/right Faceted hood design provides maximum strength at ends of the hood hoose poly, wire or poly/wire brush ptional tube brush configurations Y - Y V (Q) : &, Y : & V () , rush ead with ingle otor - ll olypropylene rush - ange Q 5 ft hydraulic drive brush head $6, Q 6 ft hydraulic drive brush head $6, Q 7 ft hydraulic drive brush head $6, rush ead with ingle otor - olypropylene & ire rush Q 5 ft hydraulic drive brush head $6, Q 6 ft hydraulic drive brush head $6, Q 7 ft hydraulic drive brush head $6, X rices subject to change without notice. ll prices are in dollars.

307 - Y - Y V (Q) cont , rush ead with ingle otor - ll olypropylene rush - ange () Q 5 ft hydraulic drive brush head $6, Q 6 ft hydraulic drive brush head $6, Q 7 ft hydraulic drive brush head $6, Q 8 ft hydraulic drive brush head $6, rush ead with ingle otor - olypropylene & ire rush Q 5 ft hydraulic drive brush head $6, Q 6 ft hydraulic drive brush head $6, Q 7 ft hydraulic drive brush head $6, Q 8 ft hydraulic drive brush head $6, , rush ead with ual otor - ll olypropylene rush - ange Q 5 ft hydraulic drive brush head $7, Q 6 ft hydraulic drive brush head $7, Q 7 ft hydraulic drive brush head $7, Q 8 ft hydraulic drive brush head $7, rush ead with ual otor - olypropylene & ire rush Q 5 ft hydraulic drive brush head $7, Q 6 ft hydraulic drive brush head $7, Q 7 ft hydraulic drive brush head $7, Q 8 ft hydraulic drive brush head $7, Y Y ( Q) ontact ustomer ervice for ounting nformation on pecific ractors () manual angle change n/a included hydraulic angle change with electric valve 12 volt 22 $1, hydraulic angle change with electric valve 24 volt 2 22 $1, hydraulic angle change cylinder and 72 hoses only 3 10 $ hydraulic angle change cylinder and 144 hoses 4 20 $ hydraulic angle change cylinder only 5 17 $ ydraulic ngle ontrol ptions (one required) control box with power lead $ ft of extra cable for or $ V - ( Q) ontact ustomer ervice for ounting vailability X () - 347

308 - V - Y - Y V (Q) cont. cont. () sight indicator flag $ sight indicator ball $ ndependent ydraulic ystem independent hydraulic system pump (rear tank mount to 3-oint 20 with pressure relief valve) $3, quick coupler kit for 3-oint hydraulic system $ prinkler its (select system and tank to complete kit) pump filter nozzles sprinkler system fits all nozzles mounts to hood $ sprinkler system tank 25 gallon with shut-off $ ood - Factory nstalled for Q $ for Q $ for Q $ for Q $ ood - Field nstalled for Q $ for Q $ for Q $ for Q $ X rape eflector ncludes 180 ood - Factory nstalled for Q $ for Q $ for Q $ for Q $ X rape eflector ncludes 180 ood - Field nstalled for Q $ for Q $ for Q $ for Q $ rices subject to change without notice. ll prices are in dollars.

309 - - Y V ( ) tandard duty pickup cleanup irect-drive motor powered from loader hydraulics flow required (2,000-3,500 psi) 26 brush diameter 5, 6, 7 brush widths available rush head reversible for "dust-panning" debris V ump bucket by lifting arms pecifications odel # orking idth verall idth eight (approx.) Quick change core rush iameter opper apacity -Y V ( ) : & : & V in. ydraulic Flow ax. ydraulic Flow () rush ead - ll olypropylene rush ange opper 5 ft hydraulic drive brush head $5, opper 6 ft hydraulic drive brush head $5, opper 7 ft hydraulic drive brush head $5, rush ead - olypropylene & ire rush opper 5 ft hydraulic drive brush head $5, opper 6 ft hydraulic drive brush head $5, opper 7 ft hydraulic drive brush head $5, rush ead - ll olypropylene rush ange opper 5 ft hydraulic drive brush head $5, opper 6 ft hydraulic drive brush head $5, opper 7 ft hydraulic drive brush head $5, rush ead - olypropylene & ire rush opper 5 ft hydraulic drive brush head $5, opper 6 ft hydraulic drive brush head $5, opper 7 ft hydraulic drive brush head $5, X ange " 66" 808 lbs 26" 13.9 ft " 66" 955 lbs ft " 78" 916 lbs 26" 16.8 ft " 78" 1063 lbs ft " 90" 1033 lbs 26" 19.8 ft " 90" 1183 lbs ft

310 - V - - Y V ( ) cont. ( Q) ontact ustomer ervice for ounting vailability () universal skid steer mounting J n/a included eplacement 0.5 x 4.0 edge for 60 bucket (11.25 bolt spacing) $ x 4.0 edge for 72 bucket (11.25 bolt spacing) $ x 4.0 edge for 84 bucket (11.25 bolt spacing) $ () prinkler its sprinkler kit without tank $ sprinkler kit includes 25 gallon tank $1, utter rush its - Factory nstalled gutter brush kit poly brush $1, gutter brush kit wire brush $1, utter rush its - Field nstalled gutter brush kit poly brush $1, gutter brush kit wire brush $1, Y V VY-Y ( ) eavy duty cleanup i-directional broom sweeps forward to pick up dirt; reverses to sweep in tight areas o front caster wheel; works easily next to walls curbs and obstacles eplaceable heavy duty bolt-on cutting edge on bucket ptional sprinkler kit with or without 25-gallon tank ptional gutter brush kit with poly or wire brush eavy-uty ucket einforced ottom eavy-uty ucket einforced ides eavy-uty ucket utting dge - ptional prinkler it eavy-uty ucket dge elds VY-Y X rices subject to change without notice. ll prices are in dollars.

311 - - Y V VY-Y ( ) cont. pecifications odel # orking idth verall idth eight (approx.) rush iameter opper apacity in. ydraulic Flow ax. ydraulic Flow ange " 78" 1060 lbs ft " 78" 1060 lbs ft Y V VY-Y ( ) cont. : &, VY-Y : & V () rush ead - ll olypropylene rush ange opper 6 ft hydraulic drive brush head $5, rush ead - olypropylene & ire rush opper 6 ft hydraulic drive brush head $5, rush ead - ll olypropylene rush ange opper 6 ft hydraulic drive brush head $5, rush ead - olypropylene & ire rush opper 6 ft hydraulic drive brush head $5, ( Q) () ontact ustomer ervice for ounting vailability universal skid steer mounting J n/a included eavy uty ption 0.63 x 6.0 edge for 60 bucket (11.25 bolt spacing) $ x 6.0 edge for 72 bucket (11.25 bolt spacing) $ x 6.0 edge for 84 bucket (11.25 bolt spacing) $ VY Y heavy duty bucket option varies $ () () prinkler its sprinkler kit without tank $ sprinkler kit includes 25 gallon tank $1, utter rush its - Factory nstalled gutter brush kit poly brush $1, gutter brush kit wire brush $1, utter rush its - Field nstalled gutter brush kit poly brush $1, gutter brush kit wire brush $1, V

312 - V - - -Y V ( ) pecifications odel # orking idth verall idth old laner pecial ption esigned to clean up millings after cold planer operations rush is operated in reverse to collect millings in bucket rush sections are compacted dense-filled wafers optimized for clearing the millings () rush ead - ll olypropylene rush ange opper 5 ft hydraulic drive brush head $5, opper 6 ft hydraulic drive brush head $5, opper 7 ft hydraulic drive brush head $5, F, V Y nches of ensely-acked enter rushes (16, 18, 24, 30, 36 ) specify inches $ >36 (40, 48, 60, 72, 84 ) specify inches $ ( Q) () ontact ustomer ervice for ounting vailability universal skid steer mounting J n/a included eplacement 0.5 x 4.0 edge for 60 bucket (11.25 bolt spacing) $ x 4.0 edge for 72 bucket (11.25 bolt spacing) $ x 4.0 edge for 72 bucket (11.25 bolt spacing) $ eight (approx.) rush iameter eaped apacity in. ydraulic Flow ax. ydraulic Flow () prinkler its sprinkler kit without tank $ sprinkler kit includes 25 gallon tank $1, utter rush its - Factory nstalled gutter brush kit poly brush $1, gutter brush kit wire brush $1, utter rush its - Field nstalled gutter brush kit poly brush $1, gutter brush kit wire brush $1, ange " 66" 955 lbs ft " 78" 1063 lbs ft " 90" 1183 lbs ft Y V ( ) : &, F : & V rices subject to change without notice. ll prices are in dollars.

313 - - Y V (V) xclusive Volumizer feature increases bucket capacity 22% igh dump design holds sweeper head clear of dumping bucket Quick change brush without breaking hydraulic lines ydraulic motor can be removed for brush change without tools pecifications odel # weeping verall verall eight opper rush idth idth ength (approx.) apacity ange ange iameter V5 60" 76" lbs 15 ft³ V6 72" 88" lbs 18 ft³ V7 84" 100" lbs 21 ft³ Y V (V) : & : & V () ydraulic rive rush ead - ll olypropylene rush V 5 ft hydraulic drive brush head V $6, V 6 ft hydraulic drive brush head V $7, V 7 ft hydraulic drive brush head V $8, ydraulic rive rush ead - olypropylene and ire rush V 5 ft hydraulic drive brush head V $6, V 6 ft hydraulic drive brush head V $7, V 7 ft hydraulic drive brush head V $8, ( Q) ontact ustomer ervice for dditional ounting vailability () universal skid steer mounting J n/a included : ome skid steer loaders require special brackets supplied by the manufacturer to attach the chains for the high dump feature. heck with the skid steer dealer for information on brackets required. () sprinkler kit without tank $ prinkler ystem - Factory nstalled sprinkler kit includes 25 gallon tank 12 volt $1, sprinkler kit includes 25 gallon tank 24 volt $1, prinkler ystem - Field nstalled sprinkler kit includes 25 gallon tank 12 volt $1, sprinkler kit includes 25 gallon tank 24 volt $1, X V

314 - V - - Y V (V) cont. cont. utter rush ssembly - Factory nstalled () gutter brush assembly poly $1, gutter brush assembly wire $1, dual gutter brush assembly poly $3, dual gutter brush assembly wire $3, gutter brush shut off kit $ utter rush ssembly - Field nstalled gutter brush assembly poly $1, gutter brush assembly wire $1, Y V (V) atented waterless dust abatement Volumizer ar increases bucket capacity 22% igh dump feature eavy duty cleanup rush automatically follows ground contour owered from hydraulics flow required 26" brush diameter 5', 6', 7' brush widths available Quick change core ool-less brush adjustment - pecifications otor and Fan nit Filter nit haker odel # weeping idth weeping idth w/ptional utter rush verall idth verall ength verall eight eight (approx.) opper apacity ange ange V5 60" " 69" 30" 1446 lbs 15 ft³ V6 72" " 69" 30" 1562 lbs 18 ft³ aximum ack ressure V7 84" " 69" 30" 1678 lbs 21 ft³ aterless ust batement ttachment " 235 lbs 350 V X rices subject to change without notice. ll prices are in dollars.

315 - - Y V (V) cont. : &, F : & V ydraulic rive rush ead - ll olypropylene rush () 5 ft hydraulic drive brush head V $10, ft hydraulic drive brush head V $11, ft hydraulic drive brush head V $12, ydraulic rive rush ead - olypropylene and ire rush 5 ft hydraulic drive brush head V $10, ft hydraulic drive brush head V $11, ft hydraulic drive brush head V $12, ( Q) ontact ustomer ervice for dditional ounting vailability () universal skid steer mounting J n/a included : ome skid steer loaders require special brackets supplied by the manufacturer to attach the chains for the high dump feature. heck with the skid steer dealer for information on brackets required. F ( Q) () control box with power lead $ control wire harness for obcat, ase & ew olland 14 pin F $ control wire harness for ase 8 pin F $ control wire harness for omatsu 8 pin $ control wire harness for at 8 pin $ control wire harness for John eere 14 pin F $ control wire harness for John eere 3 pin $ ft of extra cable $ ote: Vacuum should not be used when operating gutter broom(s) () replacement vacuum filter n/a $ utter rush ssembly - Factory nstalled gutter brush assembly poly $1, gutter brush assembly wire $1, dual gutter brush assembly poly $3, dual gutter brush assembly wire $3, utter rush ssembly - Field nstalled gutter brush assembly poly $1, gutter brush assembly wire $1, V

316 - V - Y - Y V () pecifications odel weeping idth verall idth verall ength (w/o quick coupler) eight (pprox) rush iameter opper apacity orizontal (room ifted) ange ange 20372* 72" 93" lbs 26".4 yd³ * 72" 93" lbs 26".4 yd³ " 105" lbs 26".53 yd³ " 105" lbs 26".53 yd³ " 117" lbs 26".61 yd³ " 117" lbs 26".61 yd³ " 117" lbs 32".94 yd³ " 129" lbs 32" 1.02 yd³ * 6 ft sweepers require minimum 2500 lb lift capacity eavy duty cleanup, millings, snow removal igh dump feature activated by reversing flow opper positioned in front owered from loader hydraulics flow required 26" and 32" brush diameter 6', 7', 8', 9' brush widths available Quick attach and pin-on mounts available Quick change core Y - Y V () : & - : 6 ft sweepers require minimum 2500 lb lift capacity; 7-9 ft sweepers are not available for kid-teers; oses from sweeper to the loader are not supplied; ose quick couplers are not supplied iameter rush eads - ll olypropylene rush - ingle otor verall idth opper apacity ange () 26 6 ft hydraulic bucket sweeper brush head yd ft hydraulic bucket sweeper brush head yd ft hydraulic bucket sweeper brush head yd X rices subject to change without notice. ll prices are in dollars.

317 - Y - Y V () cont. cont. 26 cont. 26 iameter rush eads - olypropylene & ire rush - ingle otor () 26 6 ft hydraulic bucket sweeper brush head yd ft hydraulic bucket sweeper brush head yd ft hydraulic bucket sweeper brush head yd iameter rush eads - ll olypropylene rush - ual otor verall idth opper apacity ange ft hydraulic bucket sweeper brush head yd ft hydraulic bucket sweeper brush head yd ft hydraulic bucket sweeper brush head yd iameter rush eads - olypropylene & ire rush - ual otor 26 6 ft hydraulic bucket sweeper brush head yd ft hydraulic bucket sweeper brush head yd ft hydraulic bucket sweeper brush head yd iameter rush eads - ll olypropylene rush - ual otor 32 verall idth opper apacity ange ft hydraulic bucket sweeper brush head yd ft hydraulic bucket sweeper brush head yd iameter rush eads - olypropylene & ire rush - ual otor 32 8 ft hydraulic bucket sweeper brush head yd ft hydraulic bucket sweeper brush head yd () ( Q) ontact ustomer ervice for ounting vailability various quick-attaches varies 125 varies () ose its - oses from the sweeper to the loader are not supplied. ose packages available are listed below or the dealer can make up their own hoses. ose quick couplers are not supplied. 3 ft hose kit.75 hoses FF hose ends $ ft hose kit.75 hoses FF hose ends $ ft hose kit.75 hoses FF hose ends $ ft hose kit.75 hoses FF hose ends $ V - prinkler it - ithout ank - Factory nstalled sprinkler kit no tank includes pump, filter, nozzles, 12 volt $ sprinkler kit no tank includes pump, filter, nozzles, 24 volt $ X - 357

318 - V Y - Y V () cont. cont. prinkler it - ithout ank - Field nstalled () sprinkler kit no tank includes pump, filter, nozzles, 12 volt $ sprinkler kit no tank includes pump, filter, nozzles, 24 volt $ prinkler it - ith ank - Factory nstalled sprinkler kit includes 85 gallon tank 12 volt (only available for use with 32) $2, sprinkler kit includes 85 gallon tank 24 volt (only available for use with 32) $2, prinkler it - ith ank - Field nstalled sprinkler kit includes 25 gallon tank 12 volt $1, sprinkler kit includes 25 gallon tank 24 volt $1, utter rush ssembly - Factory nstalled gutter brush single assembly poly $2, gutter brush dual assembly poly $4, gutter brush single assembly wire $2, gutter brush dual assembly wire $4, Y - Y V (V) - : 7,928,596 pecifications atented waterless dust abatement eavy duty cleanup igh dump feature activated by reversing flow opper positioned in front owered from loader hydraulics flow required 26" and 32" brush diameter 6', 7', 8', 9' brush widths available Quick attach mount Quick change core - odel weeping idth verall idth eight (pprox) rush iameter opper apacity ange ange 20374* 72" 93" 1100 lbs 26".4 yd³ * 72" 93" 1130 lbs 26".4 yd³ " 105" 1320 lbs 26".53 yd³ " 105" 1350 lbs 26".53 yd³ " 117" 1540 lbs 26".61 yd³ " 117" 1570 lbs 26".61 yd³ " 117" 1835 lbs 32".91 yd³ " 129" 2048 lbs 32" 1.02 yd³ * 6 ft sweepers require minimum 2500 lb lift capacity V X rices subject to change without notice. ll prices are in dollars.

319 - Y - Y V (V) cont. : &, F Y : 6 ft sweepers require minimum 2500 lb lift capacity; 7-9 ft sweepers are not available for kid-teers; oses from sweeper to the loader are not supplied; ose quick couplers are not supplied. 26 iameter rush eads - ll olypropylene rush - ingle otor 26 verall idth opper apacity ange () V26 6 ft hydraulic bucket sweeper brush head * yd $18, V26 7 ft hydraulic bucket sweeper brush head yd $18, V26 8 ft hydraulic bucket sweeper brush head yd $18, iameter rush eads - olypropylene & ire rush - ingle otor V26 6 ft hydraulic bucket sweeper brush head * yd $18, V26 7 ft hydraulic bucket sweeper brush head yd $18, V26 8 ft hydraulic bucket sweeper brush head yd $18, iameter rush eads - ll olypropylene rush - ual otor verall idth opper apacity ange V26 6 ft hydraulic bucket sweeper brush head * yd $19, V26 7 ft hydraulic bucket sweeper brush head yd $19, V26 8 ft hydraulic bucket sweeper brush head yd $20, iameter rush eads - olypropylene & ire rush - ual otor V26 6 ft hydraulic bucket sweeper brush head * yd $19, V26 7 ft hydraulic bucket sweeper brush head yd $19, V26 8 ft hydraulic bucket sweeper brush head yd $20, iameter rush eads - ll olypropylene rush - ual otor 32 verall idth opper apacity ange V32 8 ft hydraulic bucket sweeper brush head yd $26, V32 9 ft hydraulic bucket sweeper brush head yd $28, iameter rush eads - olypropylene & ire rush - ual otor V32 8 ft hydraulic bucket sweeper brush head yd $26, V32 9 ft hydraulic bucket sweeper brush head yd $28, F Y ( Q) () 12 V Filter haker ssembly (tandard configuration) n/a included 24 V Filter haker ssembly (elect only if 24 V is required) 2 n/a included ( Q) ontact ustomer ervice for ounting vailability () various quick-attaches varies 125 varies V X V

320 - V Y - Y V (V) cont. () replacement vacuum filter n/a $ ose its - oses from the sweeper to the loader are not supplied. ose packages available are listed below or the dealer can make up their own hoses. ose quick couplers are not supplied. 3 ft hose kit.75 hoses FF hose ends $ ft hose kit.75 hoses FF hose ends $ ft hose kit.75 hoses FF hose ends $ ft hose kit.75 hoses FF hose ends $ utter rush ssembly - Factory nstalled gutter brush single assembly poly $2, gutter brush dual assembly poly $4, gutter brush single assembly wire $2, gutter brush dual assembly wire $4, rices subject to change without notice. ll prices are in dollars.

321 fficiently breaks up sod and clumps of soil, mixes in compost, prepares soil for seeding ardened, replaceable tines cut 6" deep i-directional shaft undercuts and top cuts in both directions of travel orks next to walls, fences and other obstacles arrier pecifications ift apacity perating eight <9,000 lbs. <11,000 lbs. : V Y F Fixed ffset () 38 working width iller F $5, working width iller F $6, working width iller F $6, djustable offset - iller offsets to cover right tire 52 iller 6 tines, 14 to $5, tines, 18 to $5, iller 6 tines, 14 to $6, tines, 18 to $6, iller 6 tines, 29 to 44 (high flow) $7, iller 6 tines, 29 to 44 (high flow) $7, carifiers () scarifier kit 52 set of $ scarifier kit 66 set of $ scarifier kit 78 set of $

322 F osition plants, trees, & large shrubs quickly and with ease ill grasp up to 44" tree balls 6" tread plate on forks to firmly grip bags, boxes, pots, and rocks 3,000 lb. carrying capacity F () F tree fork universal mount $3, hoses flat face couplers $ hoses flat face couplers $ () pressure control valve kit $ V Y ransports and places trees and shrubbery igs holes for incoming trees fficiently removes tree stumps erfect for placing large decorative rocks and stones.375" plate with sharp, tapered edge arrier pecifications ift apacity perating eight <10,000 lbs. <32,000 lbs. V : V : Y Y F () 36 all ize ree coop F $1, all ize ree coop F $1, all ize ree coop F $1, Y Y ontact ustomer ervice at (800) () rices subject to change without notice. ll prices are in dollars.

323 djustable/detachable push bar/brush guard djustable cutting blade rotected hydraulic lines perates on standard flow hydraulics : V () 10 tree shear assembly $6, eplacement lade $ vailable in 2 series: 25 modified truncated series 30 cone model tandard electric control joystick to function the hydraulic valve verlapping blades to clean cut roots djustable legs slide to control ball depth ide gate opening to engage tree easily V Y pecifications odel verall eight verall idth igging epth lades all ia. lade ngle all eight eight w/o chain (lbs) " 46" 16" 3 16" - 20" lbs " 56" 22" 3 18" - 26" lbs " 66" 31" 3 24" - 36" lbs " 63" 31" 4 32" - 44" lbs 1825 V Y X 369

324 V cont. : V :, (F Q) : onsult Factory for specific mounts. ee specs to determine spade size and machine capacity requirement. se ount for kid-teer. ree pade VV & JY () 2030 model with blade (mount required) $9, eries - (includes blades) (no under cutter) 2625 model 25 with blades* $13, model 25 with blades* $14, model 25 with blades* $18, () 12 long control cable extension cord for use on tractor and wheel loader mounts $ long control cable extension cord for use on tractor and wheel loader mounts $ long control cable extension cord for use on tractor and wheel loader mounts $ replaceable joystick included in base unit $1, F 2030, ( Y ) () mini loader universal mount for $ universal skid steer mount for $ V 30 / olaris 300 / olaris $ obcat 50 / 52 mount for $ Y V Y rices subject to change without notice. ll prices are in dollars.

325 V Y V 371 Y

326 radco renchers, by aladin, can mount to skid-steer loaders, compact skidsteer loaders and 3-point hydrostatic tractors. everal boom lengths are available to match your job s specifications. V ince many of our attachments are customized to your needs, when you place your order you will need to choose your attachment, the mounting, and any options you would like. s you look through the products, notice the red headings in the charts - they will alert you to the choices you need to make. Y hoose your attachment hoose assemblies Y ( 4 F 6 FJX ) () 330 trencher assembly, $5, & () 30 digging depth (29 stations) $ digging depth (32 stations) $ V Y he blue information bar will tell you what is included in the price and what you need to choose to order a complete attachment. t may also include other helpful information. : 612, V F (20-45 ) Y - : Y, & Y & Y he warning box contains important information pertaining to the attachment and prime mover and/or other safety information. : Front counter weight may be necessary for proper transportation of the tractor and trencher attachment. equires rear hydraulics to run machine rices subject to change without notice. ll prices are in dollars.

327 (Y 1) Y pecifications - ransport ength from eight w rench epth eadshaft ecom d poil 3-oint to 6 x 36 w/ uger hain eight (uger verall verall verall ransport renching ischarge eadshaft hain, at 65 igging idth ouching ength idth eight ngle ngle ngle each (center of oom & round) gravity) rumber 30" 3, 4.5, 6, lbs 36" 3, 4.5, 6, lbs pecifications - ydraulic ystem perating ydraulic ystem ear ating ear ating 2,000 to 25, to 30 ategory standard, 3-point mount for hydrostatic tractors aintenance free shaft drive with automatic slip clutch for overload protection 14" discharge auger 30" & 36" digging depth available to fit most applications 38,000 lb 1.654" anti-back flex-chain for tooth pattern versatility to support many soil types and conditions ompatible with model 615 chains standard quick attach compatible upport stand is a standard feature V : Front counter weight may be necessary for proper transportation of the tractor and trencher attachment. equires rear hydraulics to run machine. Y 330 : Y, & Y & Y V Y ( 4 F 6 FJX ) () 330 trencher assembly, $5, & () 30 digging depth (29 stations) $ digging depth (32 stations) $ X Y 373

328 330 cont. & ( & Z) 38,000# / itch / ut-ype eeth / ooth very tation () for 30 boom 3 wide chain $ for 30 boom 4.5 wide chain $ for 30 boom 6 wide chain $1, for 30 boom 8 wide chain $1, for 36 boom 3 wide chain $1, for 36 boom 4.5 wide chain $1, for 36 boom 6 wide chain $1, for 36 boom 8 wide chain $1, ,000# / itch / 70/30 ombination hark-ype / up-ype eeth / ooth very tation for 30 boom 3 wide chain $1, for 30 boom 4.5 wide chain $1, for 30 boom 6 wide chain $1, for 30 boom 8 wide chain $1, for 36 boom 3 wide chain $1, for 36 boom 4.5 wide chain $1, for 36 boom 6 wide chain $1, for 36 boom 8 wide chain $1, () Valve assembly for use when tractor is not equipped with rear remote couplers $ V Y V Y rices subject to change without notice. ll prices are in dollars.

329 (Y 1) Y shaft-drive with heavy duty slip clutch for overload protection earbox drive with chain reduction to the headshaft giving productive digging chain speed 24 discharge auger, places dirt well away from the trench everal tooth options available cup shark rock & frost 50,000 lb 2 anti-back flex-chain pecifications - 3-oint ounting rench epth 30", 36, 48, 60 rench idth 6, 8, 10, 12 renching ngle uger iameter aximum renching epths ased on rench idth 6 ide 8 ide 10 ide 12 ide 60 eep 48 eep 36 eep 30 eep idth 2 year limited warranty eadshaft eight (uger ouching round) ength from 3-oint to eadshaft poil ischarge each ransport eight enter of rencher to nd of uger rencher ength with 4 oom Varies : Front counter weight may be necessary for proper transportation of the tractor and trencher attachment. hipped fully assembled, ready to mount on tractor. 612 igging hain pecifications ouble tandard, anti-backflex tandard hain itch 50,000 lbs 2 V Y : 612, V F (20-45 ) Y - : Y, & Y & Y Y () 612 rencher $6, V & Y () : 48 & 60 boom & crumber assembly includes chain tightener kit, not required on 30 and 36 assemblies due to design. 30 digging depth 23 stations $ digging depth 26 stations $ digging depth 33 stations $ digging depth 40 stations $ X Y 375

330 V Y V Y 612 cont. & Y ( & Z) 50,000# hain / 2.00 itch / ooth very tation () for 30 boom 6 wide chain $ for 30 boom 8 wide chain $ for 30 boom 10 wide chain $ for 30 boom 12 wide chain $1, for 36 boom 6 wide chain $ for 36 boom 8 wide chain $ for 36 boom 10 wide chain $1, for 36 boom 12 wide chain $1, for 48 boom 6 wide chain $1, for 48 boom 8 wide chain $1, for 60 boom 6 wide chain $1, ,000# hain / 2.00 itch / ooth very ther tation for 30 boom 6 wide chain $ for 30 boom 8 wide chain $ for 30 boom 10 wide chain $ for 30 boom 12 wide chain $ for 36 boom 6 wide chain $ for 36 boom 8 wide chain $ for 36 boom 10 wide chain $ for 48 boom 6 wide chain $ for 48 boom 8 wide chain $ for 60 boom 6 wide chain $1, ombination hain ssemblies: 50/50 ock & Frost / up eeth for 30 boom 6 wide chain $2, for 36 boom 6 wide chain $2, for 48 boom 6 wide chain $2, ombination hain ssemblies: 70/30 ggressive hark-tyle / up eeth for 30 boom 6 wide chain $1, for 36 boom 6 wide chain $1, for 48 boom 6 wide chain $1, for 60 boom 6 wide chain $1, hark-tyle ooth hain ssemblies: 50,000# F hain / 2.00 itch for 30 boom 6 wide chain $1, for 36 boom 6 wide chain $1, for 48 boom 6 wide chain $1, () stand for model 612 trencher $ special paint color - contact factory for order code 42" bolt on cutting blade $ rices subject to change without notice. ll prices are in dollars.

331 625 V - pecifications oom ize rench epth w/ uger at 65 igging ngle hain idth ecom d renching ngle eadshaft eight (uger ouching round) verall ength verall idth verall eight 30, 36, 42 & 48 digging depth available to fit most applications eavy-duty boom & crumber with replaceable wear strips llows tight fit with single side spoil augering eplaces dedicated machines at a fraction of the cost everal tooth options available cup shark rock & frost 50,000 lb 2 anti-back flex-chain for tooth pattern versatility to support many soil types and conditions wo position manual side shift mounting with optional infinite position using hydraulic side shift cylinder assembly poil ischarge each ide hift, ight of enter 30 30" 6, 8, 10, " 6, 8, , 8, , pecifications - ydraulic ystem equirements perating ressure in 14 / ax to 3000 V 625 : Y, & Y, & Y Y 625 & / ( ) () 36 digging depth, 6 wide chain, tooth every station $5, digging depth, 6 wide chain, tooth every station $5, digging depth, 8 wide chain, tooth every station $5, Y () model 625 trencher 14 to $3, & () 30 digging depth (24 stations) $ digging depth (27 stations) $ digging depth (31 stations) $ digging depth (34 stations) $ X Y V Y 377

332 V Y V Y 625 cont. & ( & Z) 50,000# hain / 2.00 itch / ooth very tation () for 30 boom 6 wide chain $ for 30 boom 8 wide chain $ for 30 boom 10 wide chain $1, for 30 boom 12 wide chain $1, for 36 boom 6 wide chain $ for 36 boom 8 wide chain $ for 36 boom 10 wide chain $1, for 36 boom 12 wide chain $1, for 42 boom 6 wide chain $1, for 42 boom 8 wide chain $1, for 42 boom 10 wide chain $1, for 48 boom 6 wide chain $1, for 48 boom 8 wide chain $1, ,000# hain / 2.00 itch / ooth very ther tation for 30 boom 6 wide chain $ for 30 boom 8 wide chain $ for 30 boom 10 wide chain $ for 30 boom 12 wide chain $ for 36 boom 6 wide chain $ for 36 boom 8 wide chain $ for 36 boom 10 wide chain $ for 42 boom 6 wide chain $ for 42 boom 8 wide chain $ for 42 boom 10 wide chain $ for 48 boom 6 wide chain $ for 48 boom 8 wide chain $ ombination hain ssembly: 50/50 ock & Frost / ullet eeth / up eeth for 30 boom 6 wide chain $1, for 36 boom 6 wide chain $2, for 42 boom 6 wide chain $2, for 48 boom 6 wide chain $2, ombination hain ssembly: 70/30 ggressive hark-tyle eeth / up eeth for 30 boom 6 wide chain $1, for 36 boom 6 wide chain $1, for 42 boom 6 wide chain $1, for 48 boom 6 wide chain $1, hark-tyle ooth hain ssembly: 50,000# F hain 2.00 itch for 30 boom 6 wide chain $1, for 36 boom 6 wide chain $1, for 42 boom 6 wide chain $1, for 48 boom 6 wide chain $1, X rices subject to change without notice. ll prices are in dollars.

333 625 cont. Y () 97 long hose/coupler universal flat face $ long hoses & case old style couplers (X series) $ long hoses Y $ long hoses Y (X series) $ kid-teer oader niversal ydraulic Quick ouplers flat face female coupler (.5 pipe thread) $52.79 flat face male coupler (.5 pipe thread) $38.30 flat face female coupler (12 o-ring) $48.65 flat face male coupler (12 o-ring) $28.98 () hydraulic side shift with diverter valve $ hydraulic side shift without diverter valve $ (requires 2 sets of auxiliary outlets) V Y V Y 379

334 V Y 640 V - 5 motor options to match the flow of many skid-steer loaders wo position manual side shaft mounting with optional infinite position using hydraulic side shift cylinder assembly 30, 36, 42 & 48 digging depth available to fit most applications, 60" high flow only echanical side shift Fixed length booms available featuring spring-loaded, self adjusting idler with full rock guards eavy-duty boom & crumber everal tooth options available cup shark rock & frost 50,000 lb 2 anti-back flex-chain for tooth pattern versatility to support many soil types and conditions pecifications oom ize rench epth eadshaft ecom d poil ide hift, w/ uger hain eight (uger verall verall verall renching ischarge ight of at 65 igging idth ouching ength idth eight ngle ngle each enter round) 30 30" 6, 8, 10, " 6, 8, 10, , 8, , pecifications - ydraulic ystem equirements (standard flow) equirements (high flow) perating ressure 14 to to 44 ax : Y, & Y, & Y Y V Y 640 & / ( ) () odel 640 rencher 36 x 6 (part no trencher) $6, odel 640 rencher 48 x 6 (part no trencher) $6, asic rencher Y () model (tandard Flow) $4, model (tandard Flow) $4, model (tandard Flow) $4, model drain line required (igh Flow) $6, model drain line required (igh Flow) $6, X rices subject to change without notice. ll prices are in dollars.

335 640 cont. & () 30 digging depth (24 stations) $ digging depth (27 stations) $ digging depth (31 stations) $ digging depth (34 stations) $ digging depth (40 stations) (for / ) $ & ( & Z) 50,000# hain / 2.00 itch / ooth very tation () for 30 boom 6 wide chain $ for 30 boom 8 wide chain $ for 30 boom 10 wide chain $1, for 30 boom 12 wide chain $1, for 36 boom 6 wide chain $ for 36 boom 8 wide chain $ for 36 boom 10 wide chain $1, for 36 boom 12 wide chain $1, for 42 boom 6 wide chain $1, for 42 boom 8 wide chain $1, for 42 boom 10 wide chain $1, for 48 boom 6 wide chain $1, for 48 boom 8 wide chain $1, for 60 boom 6 wide chain $1, ,000# hain / 2.00 itch / ooth very ther tation for 30 boom 6 wide chain $ for 30 boom 8 wide chain $ for 30 boom 10 wide chain $ for 30 boom 12 wide chain $ for 30 boom 6 wide chain $ for 36 boom 6 wide chain $ for 36 boom 8 wide chain $ for 36 boom 10 wide chain $ for 42 boom 6 wide chain $ for 42 boom 8 wide chain $ for 42 boom 10 wide chain $ for 48 boom 6 wide chain $ for 48 boom 8 wide chain $ for 60 boom 6 wide chain $1, ombination hain ssembly: 50/50 ock & Frost / ullet eeth / up eeth for 30 boom 6 wide chain $1, for 36 boom 6 wide chain $2, for 42 boom 6 wide chain $2, for 48 boom 6 wide chain $2, for 60 boom 6 wide chain $2, X V Y V Y 381

336 V 640 cont. & cont. ( & Z) ombination hain ssembly: 70/30 ggressive hark-tyle eeth / up eeth () for 30 boom 6 wide chain $1, for 36 boom 6 wide chain $1, for 42 boom 6 wide chain $1, for 48 boom 6 wide chain $1, for 60 boom 6 wide chain $1, hark-tyle ooth hain ssembly: 50,000# F hain 2.00 itch for 30 boom 6 wide chain $1, for 36 boom 6 wide chain $1, for 42 boom 6 wide chain $1, for 48 boom 6 wide chain $1, ydraulic its tandard Flow Y () 108 x.62 hoses &.50 body flat face couplers $ x.62 hoses &.50 body flat face couplers $ can be used on obcat with high flow and.50 body coupler 108 x.62 hoses & ase old style couplers $ x.62 hoses & ase old style couplers $ x.62 hoses & flat face couplers $ x.62 hoses &.62 body flat face couplers (use with ) $ can be used on obcat with high flow and.62 body coupler Y V ydraulic its igh Flow 108 x.75 hoses &.75 body flat face couplers $ x.75 hoses &.75 body flat face couplers $ x.75 hoses &.62 body flat face couplers $ x.75 hoses &.62 body flat face couplers $ x.75 hoses and.50 body flat face couplers $ kid-teer oader niversal ydraulic Quick ouplers flat face female coupler (.5 pipe thread) 8 -F $52.79 flat face male coupler (.5 pipe thread) 8 -F $38.30 half body female $48.65 half body male $ x.62 hoses &.75 body flat face couplers $ Y most paint color options available () contact factory rices subject to change without notice. ll prices are in dollars.

337 VY () esigned for standard digging conditions, light to moderately compacted, sandy, loam soils and loosely-packed gravelly soils. ypically good digging conditions. VY () ooth pattern designed to give the most production in wet, sticky conditions such as gumbo, wet clay, etc. allows the sticky soils to be discharged as it comes around the head shaft sprocket allowing the auger to pick it up and discharge spoil to the side of the trench. he chain has a tendency to hold the sticky soils causing build-up in the chain and loss of production. & F 50/50: 50% & F / 50% (&F) he rock and frost chain will give the highest production in frozen ground, highly compacted soils and rock, allowing the cup teeth to pick up and clean the trench. he &F chain is very aggressive in tough conditions, but is not as productive in the lighter, normal digging conditions. 70/30: 70% / 30% (70/30) he 70/30 chain should be applied in compacted soils, light frozen ground, baked hard clay, shale or rocky soils. he aggressive shark teeth will slice, break and relieve the tough soils, allowing the cup teeth to follow and clean the trench. s with the &F chain, the 70/30 chain will not be as productive in the lighter, normal conditions as the chain. V Y F (100% ) he full shark tooth chain is recommended in fracturable rock, shale, caliche or conditions with little or no loose soil. his chain will not efficiently clean the trench in sand, silt and high-moisture clay conditions. V 4 wide chain 6 wide chain 8 wide chain wide chain Y 383

338 VY VY 12' turning radius otating coulter wheel frame mounted ptional hydraulic steering assembly ptional cable chute blades, reel mount, and pulling accessories available VY F VY Y () odel V10 8 to $7, odel V10 10 to $8, Y () without steering,.50 poppet couplers $ without steering,.50 flat face couplers $ with steering,.50 poppet couplers $ with steering,.50 flat face couplers $ () 3-point category mounting kit $ V Y V Y VY ().375 (3/8 ) ide lade.375 blade 20, 1 clevis, 6 to 12 depth $ blade 30, 1 clevis, 6 to 12 depth $ blade 20, 1 clevis, 12 to 18 depth $ blade 30, 1 clevis, 12 to 18 depth $ (1/2 ) ide hute lade.50 chute blade 20, 6 to 12 depth $ chute blade 30, 6 to 12 depth $ chute blade 20, 12 to 18 depth $ chute blade 30, 12 to 18 depth $ chute blade 20, 20 to 24 depth $ chute blade 30, 18 to 24 depth $ () pull bullet assembly, 2.5 dia $94.79 cable pull grip, 1 to 1.24 cable $ cable pull grip,.75 to.99 dia $ cable pull grip, 1.25 to 1.49 dia $ pipe bullet assembly, 1 to 1.5 pipe $ cable reel mount, 24 max. dia. reel $ hydraulic steering assembly $1, steering conversion kit,.50 poppet couplers $ steering conversion kit,.50 flat face couplers $ rices subject to change without notice. ll prices are in dollars.

339 VY VY rotected & isolated hydraulic drive VY igh production smooth & padded rollers available teel drum has adjustable steel scraper blade between the frame and drum ensuring smooth and uniform compaction : Flow range 14 to 22 and max pressure of 3,000 pecifications odel # verall idth rum idth verall eight verall ength rum iameter perating eight (lbs) ynamic Force (lbs) Vibrating peed (vpm) Vibrating eight (lbs) rum scillation/ ile ydraulic otor Flow (gpm) mooth rum " " " " added rum " * " * " * " * V Y VY F - : VY, 80 V.50 Y F F mooth rum () 48 smooth drum $9, smooth drum $10, smooth drum $10, smooth drum $11, added rum 48 padded drum $9, padded drum $10, padded drum $11, padded drum $12, V Y 385