Price quote for: Aftermarket Tractor/Skidsteer Attachments

Transcription

1 SEQ. # MINNESOTA PRICING PAGES (Typed Your Responses Required in Yellow Cells JULY, 2013 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Aftermarket Tractor/Skidsteer Attachments Edney Distributing Co., Inc. Gary Berger th ST W Lakeville, MN, (952) (888) (952) sales@edneyco.com 1.0 Manufacturer's Name Attachment Description Warranty Term (months, years) Discount to be applied to Price List Date & I.D. of Price List Danuser mer Post Driver (SS and Tractor Loader M 1 Year 5% Hammer Series Price Sheet 2.0 Delivery Charges (SEE SPECIAL TERMS AND CONDITIONS) DELIVERY STARTING POINT: City, State, Zip NO FLAT RATE ALLOWED Fulton, MO, Price per loaded mile: Minimum Delivery Charge (if any) (SEE SPECIAL TERMS AND CONDITIONS) 3.0 Price for additional Service Manual Price for additional Parts Manual $0.40 N/A No Charge No Charge 4.0 Installation Labor Rate - Per Hour Installation services may be requested on a "as needed" basis. If not available, list 'N/A' (See Special Terms and Conditions). $80.00

2 SEQ. # MINNESOTA PRICING PAGES (Typed Your Responses Required in Yellow Cells 5.0 New Aftermarket Attachment Rental Program If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. (See Solicitation Special Terms & Conditions.) Hourly Rental Rate: N/A Weekly Rental Rate: N/A Monthly Rental Rate: N/A Percent (%) of Rental Fee applied toward purchase price: N/A JULY, Vendor Owned Rental or Demo Attachment Sales Program (See Solicitation Special Terms and Conditions.) DEDUCT 'Cost per Used Hour' from the original Contract Price Warranty Program Options: (provide details) N/A N/A

3 HAMMER SERIES SHEET Dimensions given in inches. Weight given in pounds. Dollars are U.S. Dollars Form No. 3271R Page 1 of 4 15 April 2013

4 Price Sheet - Hammer SKID-STEER MOUNT PART NO. DESCRIPTION Hammer SM $5, Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40 stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Includes 96 length hoses with flat face couplers Hammer SM40 with Grapple 955 $5, Grapple for one-man operation Hammer SM40 with Tilt 1005 $6, Tilt left or right up to 20. Includes hydraulic tilt, diverter valve, and universal wiring harness that connects to battery Hammer SM40 with Grapple and Tilt 1045 $7, FRONT-END LOADER MOUNT - SKID-STEER QUICK ATTACH Recommended 75 HP & above tractors. DO NOT exceed the tractor loader Rated Operating Capacity. Use sufficient counter weights. PART NO. DESCRIPTION Hammer LM $5, Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40 stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Includes 96 length hoses with flat face couplers. See Front-End Loader Hose Kit below for connection to rear tractor remotes Hammer LM40 with Grapple 986 $5, Grapple for one-man operation Hammer LM40 with Tilt 1076 $7, Tilt left or right up to 20. Includes hydraulic tilt, diverter valve, and universal wiring harness that connects to battery Hammer LM40 with Grapple and Tilt 1116 $7, FRONT-END LOADER MOUNT - EURO QUICK ATTACH Recommended 75 HP & above tractors. DO NOT exceed the tractor loader Rated Operating Capacity. Use sufficient counter weights. PART NO. DESCRIPTION Hammer EM $5, Hydraulic continuous chain drive, 300 lb. hammer weight (500 lbs. max.), 40 stroke, up to 35 strokes per minute, drives t-post up to railroad ties. Integrated post puller to be used with log chain. Includes 96 length hoses with flat face couplers. See Front-End Loader Hose Kit below for connection to rear tractor remotes Hammer EM40 with Grapple 920 $5, Grapple for one-man operation Hammer EM40 with Tilt 970 $7, Tilt left or right up to 20. Includes hydraulic tilt, diverter valve, and universal wiring harness that connects to battery Hammer EM40 with Grapple and Tilt 1010 $7, FRONT-END LOADER HOSE KIT PART NO. DESCRIPTION Front-End Loader Hose Kit 1/2 hose kit, 25 long, with flat face ISO couplers and pioneer couplers. Mounting bracket included for welding or attaching with bolts and nuts. Hardware not included. 18 $ Form No. 3271R Page 2 of 4 15 April 2013

5 Price Sheet - Hammer HAMMER SERIES ACCESSORIES Contact Danuser if the part you are looking for is not listed. REF. PART NO. DESCRIPTION A Grapple May be added to the Hammer SM40. Grapple for one-man operation B Tilt May be added to Hammer SM40. Tilt left or right up to 20. Includes hydraulic tilt, diverter valve, and universal wiring harness that connects to battery. C T-Post Adapter Must be added to Hammer SM40 for driving t-posts. D Plate - Floating Horseshoe Recommended when driving smaller diameter pipe (less than 4 ) in difficult conditions. Aids in keeping the post centered in the driver and reduces wear and tear on machine. Does not interfere with operation of the grapple. Works with posts 5 diameter and smaller including T post adapter Additional Weight Kit Steel shot may be added to Hammer SM40 for additional weight and driving force. 65 $ $1, $ $ $ A B Dig 25 Dig 26 C D Form No. 3271R Page 3 of 4 15 April 2013

6 Price Sheet - Hammer OPTIONAL WIRING HARNESSES REF. PART NO. DESCRIPTION A Wiring Harness 8-Pin (Allows tilt function operation from joy stick controls) $ Used on ASV, Caterpillar, Komatsu, Terex 8 pin A Wiring Harness 14-pin (Allows tilt function operation from joy stick controls) $ Used on Case, New Holland, Bobcat, Volvo, Takeuchi 14 pin A Wiring Harness 14-pin Deere (Allows tilt function operation from joy stick controls) $ Used on John Deere 14 pin B Cigarette Lighter Adapter (Used with diverter valve, instead of battery connections) Connect universal wiring harness supplied with Hammer to cigarette lighter $24.00 A B HAMMER DECALS & SAFETY SIGNS DESCRIPTION DIG 5 Safety Sign N/C DIG 10 Danuser Decal $2.08 DIG 13 Safety Sign N/C DIG 14 Safety Sign N/C DIG 16 Safety Sign N/C DIG 21 Safety Sign N/C DESCRIPTION DIG 22 Safety Sign N/C DIG 23 Safety Sign N/C DIG 24 Safety Sign N/C DIG 25 Safety Sign N/C DIG 26 Safety Sign N/C Form No. 3271R Page 4 of 4 15 April 2013

7 SEQ. # MINNESOTA PRICING PAGES (Typed Your Responses Required in Yellow Cells JULY, 2013 Price quote for: Vendor Name: Contact Person: Street Address: P.O. Box: City, State, Zip Phone #: Toll Free #: Fax #: Address: Aftermarket Tractor/Skidsteer Attachments Edney Distributing Co., Inc. Gary Berger th ST W Lakeville, MN, (952) (888) (952) sales@edneyco.com 1.0 Manufacturer's Name Attachment Description Warranty Term (months, years) Discount to be applied to Price List Date & I.D. of Price List 2.0 Delivery Charges (SEE SPECIAL TERMS AND CONDITIONS) DELIVERY STARTING POINT: City, State, Zip Price per loaded mile: Minimum Delivery Charge (if any) (SEE SPECIAL TERMS AND CONDITIONS) 3.0 Price for additional Service Manual Price for additional Parts Manual Danuser PRO Series Earth Auger ounting/augers: 1 Year, Drive Unit: 5 Yea 5% PRO Earth Auger Price List NO FLAT RATE ALLOWED $0.40 N/A No Charge No Charge Fulton, MO, Installation Labor Rate - Per Hour Installation services may be requested on a "as needed" basis. If not available, list 'N/A' (See Special Terms and Conditions). $80.00

8 SEQ. # MINNESOTA PRICING PAGES (Typed Your Responses Required in Yellow Cells 5.0 New Aftermarket Attachment Rental Program If rental programs are available on the new equipment offered, with the option to purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee paid by the purchaser that will be applied to the purchase price. (See Solicitation Special Terms & Conditions.) Hourly Rental Rate: N/A Weekly Rental Rate: N/A Monthly Rental Rate: N/A Percent (%) of Rental Fee applied toward purchase price: N/A JULY, Vendor Owned Rental or Demo Attachment Sales Program (See Solicitation Special Terms and Conditions.) DEDUCT 'Cost per Used Hour' from the original Contract Price Warranty Program Options: (provide details) N/A N/A

9 PRO EARTH AUGER Dimensions given in inches. Weight given in pounds. Dollars are U.S. Dollars 5-Year Warranty Professional strength for extreme applications. Units range from 6-60 GPM and up to 3000 and 5000 PSI. Mountings are available for front-end loader, skid-steer, excavator, miniexcavator, and backhoe. TO A COMPLETE UNIT Drive Unit (pgs. 2-3) Hoses & Couplers (pg. 2) Mount (pg. 4) Augers (pgs. 5-10) Auger Accessories (pgs ) Replacement Wear Parts (pg. 12) Freight TOTAL Form No. 3253R Page 1 of 12

10 MODEL 615 $1, MODEL 1025 $1, Rd. Part No. 2 Hex Part No. Approx. Ship Weight (lbs.) Rd. Part No. 2 Hex Part No. Approx. Ship Weight (lbs.) Maximum Auger Diameter Hydraulic Flow Maximum Hydraulic Pressure Maximum Hydraulic Back Pressure Gearbox Ratio GPM 3000 PSI 1500 PSI 4.08:1 Maximum Auger Diameter Hydraulic Flow Maximum Hydraulic Pressure Maximum Hydraulic Back Pressure Gearbox Ratio GPM 3000 PSI 1500 PSI 4.08:1 Speed Torque Speed Torque GPM RPM PSI Ft.-lbs GPM RPM PSI Ft.-lbs MODEL 1530 $1, Rd. Part No. 2 Hex Part No. Approx. Ship Weight (lbs.) Maximum Auger Diameter Hydraulic Flow Maximum Hydraulic Pressure Maximum Hydraulic Back Pressure Gearbox Ratio GPM Speed RPM PSI Torque GPM 3000 PSI 1500 PSI 4.08:1 Ft.-lbs MODEL 2035 $2, Rd. Part No. 2 Hex Part No. Approx. Ship Weight (lbs.) Maximum Auger Diameter Hydraulic Flow Maximum Hydraulic Pressure Maximum Hydraulic Back Pressure Gearbox Ratio GPM Speed RPM PSI Torque GPM 3000 PSI 1500 PSI 4.08:1 Ft.-lbs PART NO. DESCRIPTION Cross Port Relief Valve 7 $ (required for pressures exceeding 3000 PSI) PART NO. DESCRIPTION /2 HOSE KIT with flat face ISO couplers 14 $ /4 HOSE KIT with flat face ISO couplers 19 $ /4 HOSE KIT with flat face ISO couplers 19 $ (for models 2545H & 3060H, not to exceed 45 GPM) /2 HOSE KIT (includes fittings NOT couplers) 9 $ /4 HOSE KIT (includes fittings NOT couplers) 14 $ Hoses are 96 long with abrasion sleeves 3/4 hoses REQUIRED for 20 GPM or more Flat face ISO couplers Form No. 3253R Page 2 of 12

11 NO DRAIN LINE REQUIRED MODEL 2545H $3, MODEL 3060H $3, Hex Part No. Approx. Ship Weight (lbs.) Hex Part No. Approx. Ship Weight (lbs.) Maximum Auger Diameter Hydraulic Flow Maximum Hydraulic Pressure Maximum Hydraulic Back Pressure Gearbox Ratio NO DRAIN LINE REQUIRED GPM Speed RPM PSI Torque GPM 3000 PSI 400 PSI 23.72:1 Ft.-lbs Maximum Auger Diameter Hydraulic Flow Maximum Hydraulic Pressure Maximum Hydraulic Back Pressure Gearbox Ratio NO DRAIN LINE REQUIRED GPM Speed RPM PSI Torque GPM 3000 PSI 400 PSI 23.72:1 Ft.-lbs HIGH-PRESSURE DRIVE UNITS (UP TO 5000 PSI) ED BELOW NO DRAIN LINE REQUIRED MODEL HP-2545H $4, MODEL HP-3060H $4, Hex Part No. Approx. Ship Weight (lbs.) Hex Part No. Approx. Ship Weight (lbs.) Maximum Auger Diameter Hydraulic Flow Maximum Hydraulic Pressure Maximum Hydraulic Back Pressure Gearbox Ratio NO DRAIN LINE REQUIRED GPM Speed RPM PSI Torque GPM 5000 PSI 400 PSI 23.72:1 Ft.-lbs Maximum Auger Diameter Hydraulic Flow Maximum Hydraulic Pressure Maximum Hydraulic Back Pressure Gearbox Ratio NO DRAIN LINE REQUIRED GPM Speed RPM PSI Torque GPM 5000 PSI 400 PSI 23.72:1 Ft.-lbs HOSE KITS ARE NOT AVAILABLE FOR THE HP MODELS. DEALER/CUSTOMER IS RESPONSIBLE FOR PROPER HOSES AND COUPLERS. Form No. 3253R Page 3 of 12

12 SKID-STEER QUICK ATTACH Mounting Kit (includes knuckle and cradle) attaches the Drive Unit to skid-steers with Standard 2-pin system and SAE quick couplers. PART NO $ BOLT-ON BUCKET Mounting Kit (includes knuckle) will mount on vertical surface. Kit does not include bucket mounting hardware. PART NO $ QUICK ATTACH MOUNTING KITS PART NO. MAKES & MODELS Cat 420D & 420E (pin grabber) JCB 208S, 803, & $ $ JD 790ELC 172 $1, JD 135C RTS 82 $ YANMAR VIO27 & 45 $ VIO35 (quick coupler) YANMAR VIO40, 50 $ VIO45, VIO55, & VIO50 (quick coupler) KUBOTA KX & 60 $ U KUBOTA KX $ KUBOTA KX $ TLB (BACKHOE) & EXCAVATOR Less dipperstick pin. For dipperstick widths up to 13. PART NO. BUCKET PIN /8 inch 49 $ /4 inch 49 $ mm 50 $ mm 50 $ mm 48 $ Welded mount w/ fixed width 50 $ SMALL BACKHOE & MINI-EXCAVATOR Less dipperstick pin. For dipperstick widths from 3-1/2 to 8. Bucket pin diameters listed below. PART NO. BUCKET PIN mm 42 $ inch 42 $ mm 42 $ /4 inch 42 $ mm 42 $ /8 inch 42 $ /2 inch 42 $ mm 42 $ /8 inch 42 $ /4 inch 46 $ mm 46 $ mm 46 $ inch 46 $ OFFSET FRONT-END LOADER QUICK ATTACH Mounting kit (includes knuckle and cradle) attaches Drive Unit to skid-steers or front-end loaders with a skid-steer or euro/global quick attach system. PART NO. DESCRIPTION Quick Attach Plate Offset 74 $ w/ hardware Euro/Global Offset w/ hardware 86 $ Form No. 3253R Page 4 of 12

13 4 Length WOBBLE AUGERS Patent Pending RD 4 $ $ $ To be used with Danuser PRO and EP units. Spiral & Checkered Hardfacing Hardened Fishtail Point NOTE: The 9 Wobble Auger should be used on a machine with an Operating Load or Rated Operating Capacity of 2250 lbs. or greater, utilizing an auger drive with 2000 ft.-lbs. of torque or greater Danuser s Dirtless Digging Solution Pushes through Dirt Sand Clay Asphalt Compacted Rock Embedded Rock No loose dirt in the bottom of the hole No excess dirt to fall back into the hole No dirt to remove around the top of the hole Compacted hole ready for concrete Suggested mounting to skid-steers, front-end loaders, backhoes, excavators, mini-excavators, telescopic handlers, articulated loaders, and integrated tool carriers Requires down force for correct operation Not for 3-point hitch mounted diggers POINTS PART NO. DESCRIPTION Dirt $ Hardfaced $ Carbide $ Form No. 3253R Page 5 of 12

14 FABRICATED AUGERS Light to Moderate Ground Conditions 4 Length Augers- STANDARD Fabricated Boring Head Hardened Bolt-on Teeth - Std. Incl. Gage Teeth in Outside Positions Wisdom Teeth in Inside Positions Hardened Fishtail Point 5/16 Heavy-Duty Double Flighting NO. OF TEETH NO. OF TEETH RD RD 4 $ $ $ $ $ $ $ $ $ $ $ $1, $1, Length Augers 4 $ $ $ $ $ $ $ $ $ $ $ $ $1, Form No. 3253R Page 6 of 12

15 FABRICATED AUGERS Light to Moderate Ground Conditions Fabricated Boring Head Hardened Bolt-on Teeth - Std. Incl. Gage Teeth in Outside Positions Wisdom Teeth in Inside Positions Hardened Fishtail Point 5/16 Heavy-Duty Double Flighting 5 Length Augers NO. OF TEETH RD 4 $ $ $ $ $ $ $ $ $ $ $ $1, $1, Length Augers NO. OF TEETH RD 4 $ $ $ $ $ $ $ $ $ $1, $1, $1, $2, Form No. 3253R Page 7 of 12

16 NO. OF TEETH Form No. 3253R Page 8 of 12 RD 6 $ $ $ $ $ $ $ $ $1, $1, $1, $1, $2, $3, Length Augers CAST HEAD AUGERS Difficult Ground Conditions Cast Steel Boring Head Hardened Drive-in Teeth - Std. Incl. Gage Teeth in Outside Positions Chisel Teeth in Inside Positions Hardened Fishtail Point 5/16 Heavy-Duty Double Flighting 4 Length Augers- STANDARD NO. OF TEETH RD 6 $ $ $ $ $ $ $ $ $1, $1, $1, $1, $2, $2,

17 5 Length Augers NO. OF TEETH RD 6 $ $ $ $ $ $ $ $ $1, $1, $1, $1, $3, $3, Length Augers CAST HEAD AUGERS Difficult Ground Conditions Cast Steel Boring Head Hardened Drive-in Teeth - Std. Incl. Gage Teeth in Outside Positions Chisel Teeth in Inside Positions Hardened Fishtail Point 5/16 Heavy-Duty Double Flighting NO. OF TEETH RD 6 $ $ $ $ $ $ $1, $1, $1, $1, $2, $2, $4, $5, Form No. 3253R Page 9 of 12

18 BULLET ROCK AUGERS Rock, Concrete, Asphalt, and Frozen Ground 4 Length Augers NO. OF TEETH RD 4.5 $ $1, $1, $1, $1, $1, $1, $1, $1, $1, $2, $2, $2, Bullet Rock Pilot List Price: $ Bullet Rock Tooth List Price: $10.25 TREE AUGERS Tree and Shrub Planting Fabricated Boring Head Hardened Bolt-on Teeth - Std. Incl. Gage Teeth in Outside Positions Wisdom Teeth in Inside Positions Hardened Fishtail Point 5/16 Heavy-Duty Double Flighting 4 Length Augers NO. OF TEETH RD 18-9 $ $ $ $1, Form No. 3253R Page 10 of 12

19 VARIABLE LENGTH EXTENSIONS Variable length auger extensions store inside the column of 10 diameter or larger augers. Extension increments are every 6 on auger extensions and every 12 on auger extensions. Do not use with HP models. FIXED LENGTH EXTENSIONS Fixed length auger extensions extend the auger s digging depth by the length of the extension. LENGTH 2 Hex 2 Hex PART NO. 24 $ $ $ LENGTH Round PART NO. 12 $ $ $ $ LENGTH PART NO. 12 $ $ $ $ LENGTH Round PART NO. 12 $ $ $ $ LENGTH 2 Round PART NO. 24 $ $ $ LENGTH 2 Round PART NO. 24 $ $ $ Form No. 3253R Page 11 of 12

20 ADAPTERS Connect Danuser drive units to other augers or Danuser augers to other drive units. DRIVE UNIT AUGER COLLAR PART NO. 2 Hex Rd. $ Hex 2 Rd. $ Rd. 2 Hex $ Rd. 2 Rd. $ Rd. 2 Hex $ Rd. Rd. $ Form No. 3253R Page 12 of 12