9 3-POINT LINKAGE. 3-Point Linkage Definition of Categories. Top Link Holder. Standard Duty Top Links. Top Link. Lower Link

Transcription

1 9 POINT LINKG Point Linkage efinition of ategories at 0 at at at Ø Top Link /8" /4" " /4" 6 9 at 0 at at at /8" 7/8" /8" 7/6" The linkage of a tractor is often described in terms of ategory 0,, or. The table above shows the dimensions which correspond to these ategories. Ø Lower Link Top Link Holder Manufactured from spring steel, this retaining clip will keep the top link securely in place while not in use. It can be bolted on to any convenient position. S.44 pc Standard uty Top Links Max HP: 0 S.00 Toy ar S.0048 /8" UN L/ollar at Tube Length Standard uty Top Links Zinc lue Green Red Gold (conomy) Min djustment Min Max Replacement all nds 0/0 7 / 90 S.0448 / / 80 9 S.044 S.044 0/0 9 /4 48 S / 7 7/ 0 4 S.044 S.044 / 7 80 S.0 /8 4 9/ / 9 0 S / /4 8 S.0006 S / 7/ / 0 S.0048 S S / / S.004 S.004 / 4 / 68 S / 7 / S.004 S.004 / S.0000 S.087 S.004 S.49 0 / 8 7/6 0 7 S.004 S.004 / S.49 S / 8 / 6 78 S.004 S.0047 / S /6 / 8 S.0046 S.0047 / 0 08 S.000 S.00 S / 9/ S.004 S.004 / 0 08 S / / 6 8 S.004 S.0047 / 0 08 S.498 / 6 7/ S.0046 S.0047 Max LH RH S STION /PGS & 4 OR LOKING & LYNH PINS ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

2 POINT LINKG 9 orged Top Link nds Ø at Ø Ø nd UN Standard uty 0 /4 /8 6 / /8 /6 00 LH S /4 /8 6 / /8 /6 00 RH S.044 /8 /4 9 7 /4 97 /4 44. /8 8.6 /8 4 LH S.004 /8 /4 9 7 /4 97 /4 44. /8 8.6 /8 4 RH S.004 /8.4 9 / /6 7 /8 87 LH S.0046 /8.4 9 / /6 7 /8 87 RH S.0047 Heavy uty /4.4 0 / / 8 6 /6 70 LH S.0409 /4.4 0 / / 8 6 /6 70 RH S.094 xtra Heavy uty / / 47 7 /4 8 LH S.046 / / 47 7 /4 8 RH S.044 /8 /4.7 0 /4 60 /4 44. / /4 8 LH S.049 /8 /4.7 0 /4 60 /4 44. / /4 8 RH S.0490 Top Links at Heavy uty Top Links max max 4 7/6 /8 6 / /4 7/6 6 9/ S.0408 S.047 S.0474 LH nd S.0409 S.046 S.046 RH nd S.094 S.044 S.044 Please ensure that the tractor has at least /4" between the Top Link Pin and the Tractor Housing. olor Red Red Red HP at Heavy uty Top Link Max.HP:0 /4 / / 648 max 97 S.0460 LH nd S.049 RH nd enter Tube S.0490 S olor lack ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

3 9 POINT LINKG at & Special Heavy uty Superlinks enter tube, stove enamelled black gloss all nds and Locking ollar ZP Greasing Points xtra strong one side swagged ball sockets forged from carbon manganese steel ase hardened swivel balls G Sparex / at Min/Max inch all nd LH Thread M6 all nd RH Thread M6 Thread S.607 / S.6076 S.607 /4" UN S.6074 / S.6076 S.607 /4" UN S.6840 / 80 0 /8 /8 S.6848 S.6849 M6 S.684 / /8 /8 S.6848 S.6849 M6 avid rown Top Links at / 0 max 0 Supplied with ushing S S.0087 olor Zinc Models 780, 880 ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

4 POINT LINKG 9 ord Top Links at / / 4 / 4 / 4 / inch max /4 /4 /4 S.878 S.060 S.06 LH nd S.06 S.06 S.064 RH nd S.877 S.06 S.06 olor lue lue lue 0NN76 6NN76 0NN76 ord Top Link nds LH Ø RH at inch /4 /4 inch /4 /4 0 0 inch 6 /8 6 /8 inch / / / / Ø UN /4 /4 /4 /4 nd LH LH RH RH S.06 S.064 S.877 S.06 0NN 94 0NN 94 6NN 9 0NN 9 ompact Top Links Iseki, Kubota & other ompact Tractors Top Link all nds narrower than standard Top Links at / / 0 / 8 inch max / 6 S.0478 S.4864 enter Tube 4 / / olor Zinc lack Models Various Various ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only. 4

5 9 POINT LINKG John eere Top Links /8 inch max 0 / S.046 S.784 LH nd S.046 /8" UN.787" Ø S.046 /8" UN " Ø RH nd S.046 /8" UN " Ø S.046 /8" UN " Ø olor Green Green SL 970 John eere Top Link nds LH Ø Ø RH inch / 0.4 inch 9 7/6 /4 9 inch 7 /4 / inch /8 /8 Ø UN /8 /8 nd LH RH S.046 S.046 SL 97 SL 97 (S.046 only) S.604 John eere Top Links S.60 S.60 w/ all at Heavy uty Top Links /4 inch max 9 / max S.604 S.60 LH nd S.60 S.60 RH nd S.607 S.60 olor Green Green S.607 Knuckle S.60 levis Pin S.740 lip S.0464 S.0464 SL 6808 S.60 ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

6 POINT LINKG 9 Massey erguson Top Links at / / / / / / /4 4 6 / 4 6 / 6 / max 9 / 0 /4 0 /4 S.0084 S.008 S.0086 S.0089 S.0088 S.0087 LH nd S S S S S S.0044 RH nd S S S S.0044 S.0044 S.0044 lip S.0049 S.0049 S.0049 S.0049 S.0049 S.0049 olor Grey Grey Grey Grey Grey Grey 844M M9 846M9 9476M M9 8878M9 Massey erguson Top Link nds LH RH Ø at /4 /4 /8 /8 /8 /8 /8 /6 /8 /6 Ø UN /6 /6 /6 /6 nd LH LH RH RH S S.0044 S S M9 86M M9 86M9 Zetor Top Link at / 0 /6 max / S.0097 LH nd S.009 RH nd S.009 enter Tube S.000 olor Zinc Models Various ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only. 6

7 9 POINT LINKG Top Link Pin ssortment Top Link P Top Link P Metric onta: S.0007 S.0009 S S S S S.0008 S S.0804 S.080 at at at at at at at 4" Hook 6" Hook S.004 0pcs Top Link onversion Pin at 0 S.00 " /8" S.07 " /8" at S.00 " /4" S.0007 /4" /4" S.0007 /8" /4" S /4" /4" S /4" /4" at S " " S /6" " S /" " S /6" " S /4" " at S /8" /4" S.6 /4" /4" S.004 =77, =0 S =, = S.0009 =7, =, S.0007 =44, = Loader Top Link P S.060 = /4", =/4" S.06 = /4", =/4" S.06 = 7/8", =/4" Loader Top Link P at onta: S.0007 Pin x S.004 ushing x S.087 Top Link P Misc S.074 =", = /8" ø Top Link Pin øg øh S.0008 =8 /4", = /4", = /4", = /4", =/", =/6", G= ", H=/4" S.7 =6 7/64", =", = /8" = /4", =/4" Top Link P Misc S.00 = /", = /8" S.00 =6", = /8" Vicon Top Link Pin Ø G S.040 = 7/64", =7/8", = 7/", =/", = /8", =7 /64", G=/4"ø Ø S.000 =6 /6", =", =4 /8" =9/", =/4" S.00 = /6", =", = /6" = 7/8", =/4" Universal Top Link Pin G S.09 =6 /", = 9/6", = /", =4/64", =/6 ø, =", G=", H=/4" H 7 ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

8 POINT LINKG 9 Top Link Swivel Set Ø S.49 at 0 =/8", =", =" S. at =/4", = 7/8", = /4" S. at =", = /8", =" Ø Top Link all nds Ø S.000 at =", =/4", = /8" =/", = /4" S.00 at = /8", =", = /8", =/8", =" S.046 at = /", = /4" = /", =7/8", =" Lower Link all nd Ø S.08 at = /4", =7/8", = /8" =/8", = /8", = /8" S.04 at = /8", = /8", = /4" =/4", = /", = /4" S.040 = /8", =", = /4" =/4", = /", = /4" Lower Link all nd Ø Lower Link nds Ø Lower Link ual nd Ø S.06 at =4", =7/8", = /6" =/8", = /8", = /8" S.07 at =4", = /8", = /6" =/8", = /8", = /8" S.40 at = /4", =7/8" = /4", =/8" its: ord, M Lift rm LH=Rear Implement RH=ront Tractor S.4 at = /4", =7/8" = /4", =/8" its: ord, M Lift rm LH=ront Tractor RH=Rear Implement S.070 at & = /8", =7/8" = /4", =/4" = /4", = /8" Swivel all Lower Link all nd Lower Link all nd S. at =7/8", = /8", = /8" S.7 =", = /8", = /" S.9 at = /8", = /8", = /4" S.07 at = /8", =7/8", = /4", =/4", = /8", = /8" S.074 at = /8",= /8, = /4", =/4", = /8", = /8" Ø S.08 at = /4", = /8", = /6", =7/8", = /4", = /6" S.04 at = /4", = 7/6", = /6", =7/8", = /4", = /6" Ø Lower Link all nd With Heat Treated Swivel alls Ø S.0887 at =", =7/8", = /4", =/6", = /8", = /8" S.0888 at = /8", = /8", = /4", =7/8", = /4", = /8" ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only. 8

9 9 POINT LINKG ord Replacement alls S.0006 at (=7/8", = /4", = /8") N99 S.007 at (= /8", = /4", = /8") : NN7 S.0007 at (= /8", = /4", = /4") : NN7 ord all Retaining lip S.007 Use w/ S.0006, S.007, S.0007 its: Most ord Tractors ('6>) : NNN7 S.008 Use w/ S.06 its: Use w/ ual all Only ord Replacement alls J Replacement alls Ø S. at Leveling rm (= /6", =/4", = /8") : T90 S.004 at Top Link (=", =/4", = /4") : 680 S.00 at Top Link (=", =", = 4") : 68 Ø S.047 S.0006 S.048 S.0007 Oliver Replacement alls S.890 at : its: TN Series ord ual atagory alls M ual atagory alls S.0997 at & : M 88648M, 88649M Ø Ø S.06 at ( all & lip) S.00 S.0 0 S.4 at Lift rm (=", = /8", = /4") : 049 S.004 at Top Link (=", =/4", = /4") : 048 S.00 at Top Link (=", =", = 4") : 0968 Oliver Replacement alls w/ at Hitch S.006 at (= /" x = /8" x = /4") S.007 at (= /" x = /" x = /4") : 604, 6000 its: 70, 80, 90, 90T, 00, 7, 8, 9,, 8, 88, 0, 0,, 0,, 80, 40, 47, 480 S.06 S.06 0 M Lower Link Swivel alls S.078 at : M 88648M S.078 at S.070 lip S.078 at S.06 M Spring lip S.070 its: Most M Tractors : 8699M S.04 S.7 S.049 M Lower Link Swivel alls S.079 at : M 8849M S.079 at S.070 lip Lower Link Swivel alls S.066 (=7/8", = /4", = /8") S.069 =7/8", =", = /" S.067 (=", =", = /") S.068 (= /8", =", = /") S ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

10 POINT LINKG 9 at at Top Link onversion ushing S.00 (=", =/4", =") at 0 at Lower Link onversion ushing S.00 (= /6", =/8", =7/8") at at Lower Link onversion ushing S.0009 (= /4", = /8", = 7/6") S.004 (=/6", =/4", =", =/") at at Lower Link onversion ushing S.00 (= /4", =7/8", = /8") S.009 (= /6", = /8", = 7/6") at at Top Link onversion ushing S.0008 (=", =", = /4") S.00 (= 7/6", =7/8", = /8", =/") S.000 (= /", = /8", = 7/6", =/") Linkage ushings S.0848 S.06 S.04 S.0060 S.4906 S.00 S.00 S.00 S.009 S.0008 S.0009 S.000 Top Link Lower Link Quick Release Lower Link Lower Link Top Link Lower Link Lower Link at / at / at / at / at / at / at / pcs pcs pcs 6 pcs 4 4 pcs 0 4 at 0 djustable Implement Pin S.07 9/" /8" /4" 4" /6" /8" Ø UN ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only. 0

11 9 POINT LINKG at Lower Link Implement Mounting P S.0099 /" 7/8" Ø /6" S.0004 /" 7/8" Ø /" /8" Ø UN 7/8"Ø UN /4" /8" /" /4" 6 /8" " S.0098 /" 7/8" Ø 7/8" S.00 /" 7/8" Ø /4" Ø UN 7/8" Ø UN /4" /" /8" /8" 4 9/6" /6" /4" S.0000 /" 7/8" Ø /4" /6" /" 9/6" /8" 7/8"Ø UN S.090 Heavy uty /" 7/8" Ø /4" /8" /4" " " Ø UN S.000 /" 7/8" Ø /4" /4" /" /8" 7/8" Ø UN S.088 Heavy uty /" 7/8" Ø /4" /8" /4" /8" /8" Ø UN at Lower Link Implement Mounting P S.0097 /" /8" /8" /4" Ø UN S.0006 Heavy uty /" /8" Ø /8" /8" Ø UN /4" 7/8" /8" " 6 /4" " S.000 /" /8" /8" 7/8" Ø UN S.09 Heavy uty /" /8" Ø " " Ø UN /8" /8" 7/8" /8" 7/8" /8" ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

12 POINT LINKG 9 S.0006 at Lower Link Implement Mounting P /" /8" Ø UN /8" Ø /" /4" /" 7 /4" 7/8" Ø S.000 at Lower Link Implement Mounting P /" 7/6"Ø " 7/8" 7/8" /" /8" UN rawbar Lock w/ Nut & olt S.000 /" 7/8" Ø /8" Ø " Ø UN " /8"./4" /6" 8" S.99 (=", =9 /", = /8"x", = /") : L S.4 (= /", =8", = /4"x /4", =") : L0 rawbars 7/6" H G GØ HØ /8 0 / /6 / / 7/8 /8 / /6 4 9/64 /8 7/8 /8 9 /4 /6 4 / /8 7/8 / 0 /8 /6 /8 /8 7/8 / 0 /4 /8 /8 /8 /8 /8 6 /4 /64 /8 /8 /8 9 /8 /8 7 7/8 /8 /8 0 /4 /8 /8 6 /4 /8 4 /8 / 4 /4 /8 6/64 4 /64 7/64 7/64 /6 /6 /6 /6 /6 /6 /4 /4 49/64 / / / / / 9/64 /8 /4 /4 /4 No. Holes Tensile Strength tons/ kg/cm at S.49 S.0009 S.00 S.00 S.006 S.4 S.08 S.60 S.606 S.99 rawbar Stay Strap rawbar Hook levis S Upper =6", = /" S.604 Lower = /4", =" S.090 Includes /4" TPin Use with /6"/" chain its: rawbars up to /4" Thick S.669 Twist /8" Pin, /4" levis S.67 Twist /4" Pin, 7/8" levis S.66 Straight /4" Pin, 7/8" levis ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

13 9 POINT LINKG Hitch P Lower Link Pin Ø Ø S.0889 =4 /6", =7/8" S.09 S.094 S.09 S.00 S.00 S.004 S.6 S.0 S.67 S.69 S.7 /" /8" /8" /4" /4" 7/8" " " /8" /4" /" /" 4 /4" 6 /4" 4 /4" 6 /4" 6 /4" 6 /4" 7 /4" 6 /4" 6 /4" 7 /4" S.096 =", =/" S.097 =", =/8" S.098 = /", =/4" ent Hitch Pin ø Red Handle Hitch P UniLink Hitch P S.0066 =/8", = /4", = /4" S.0069 =/4", =", =4 7/8" S.0068 =7/8", =",=4 7/8" S.0067 =", =", =4 7/8" S.080 =/", = /8" S.08 =/8", =4" Plastic oated Head, Handle & lip S.08 =7/8", =6 /" S.086 =", =7 /" Hitch Pin S.68 =", = /8" S.08 =/8", = /" S.08 =/4", =4" S.084 =/4", =6 /" S.087 = /8", =8 /" S.088 = /4", =8 /" S.089 = /", =8 /" Hitch Pin w/ hain S = 7/8", =/4" S.004 =7 /6", =" ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

14 POINT LINKG 9 Stabilizer P S.0067 Includes Lock Nuts =" =" =7/6" =7/8"Ø /8" UN S.0069 = /4" = /8" =7/6" =7/8"Ø /8" UN S.0070 Includes Lock Washer & Nut = /8" = /8" =7/6" =/4"Ø /4" UN S.007 = /" =" =7/6" =7/8"Ø /8" 7/6" UN /" S.079 Includes ushing & Nut = /4" =7/8" =7/6" =7/8"Ø /4" UN S.067 = /8" = /8" =7/6" =7/8"Ø /4" UN S.099 Includes Lock Washer & Nut = /" =7/8" = /6" =/4" Ø /4" UN S.660 = /8" =" = /4" =7/8"Ø /8" UN S Includes Lock Washer & Nut = /8" =" = /6" =/4" Ø /8" UN S.6006 Pin =4 /4" =/8" =7/8" =7/8"Ø = /6" S.078 Nut (Order Separately) Ø /8" UN S.068 =" =" =7/6" =7/8" Ø /4" /8" UN S.07 = 9/6" = /6" =7/6" =7/8" Ø /4" UN S.066 = /4" = /6" =7/6" =7/8" Ø S.798 = 7/6" =/" = /6" =7/8" Ø /4" UN /8" UN ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only. 4

15 oth ends cranked o 9 POINT LINKG Short Stabilizer ars S.008 Red =7/8" Pin Hole S.007 =7/8" Pin Hole Min/Max 4 /4" /7 /" Min/Max 4" /7 /" S.009 djustable Stabilizer ars Ø Length Min/Max Ø olor Thread Standard S.0080 /4 /4"UN 8 / / 7/8 Grey S /8 /4"UN 8 / / 7/8 Red Heavy uty S.008 7/8 7/8"UN 8 / / 6 7/8 Zinc S.09 7/8 7/8"UN 8 / / 6 7/8 Zinc Rigid Stabilizer ars Holes S.0077 S.0078 S.6408 /4 4 /8 4 /4 /4 /4 /4 / 7/8 / /8 /8 /8 6460M ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

16 POINT LINKG 9 Stabilizer rackets Stabilizer rackets Turnbuckle ssembly S.486 = /" = /" =6 /6 =/64 S.0060 LH S.006 RH = /6" = /6" =" = /8" = /4" = 7/6" S.084 = /" Pin Holes Min=9 /4 " S.08 = /" Pin Holes Min=0 " 4./6"./4"./4" /6" /8" ase/ih Stabilizer ssembly S.784 Min/Max= /4" / 4 /6" ord Stabilizer ssembly S.0 Min/Max= "/ 8 /8" S.0069 S.040 S.007 eutz Stabilizer ssembly S.09 Min/Max=7 / / 7/64" ord Stabilizer ssembly S.084 Min/Max=9 / / /" S.0067 S.040 S.08 S.040 S.066 S.040 S.08 S.040 S.040 eutz Stabilizer ssembly S.06 Min/Max=0 /" / /8" iat Stabilizer ssembly S.089 Min/Max=8 7/64" / 7/64" S.0 S.0 S.0069 S.040 S.08 S.040 S.0069 S.067 S.04 S.084 S.04 S.04 ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only. 6

17 9 POINT LINKG iat Stabilizer ssembly S.090 Min 9 /" Max /" Massey erguson Stabilizer ssembly S.407 Min 7 /4" Max 9 /" S.067 S.04 S.084 S.04 S.04 S.40 S.408 S.40 Massey erguson Stabilizer ssembly S.408 Min " Max " Massey erguson Stabilizer ssembly S.40 Min " Max " S.488 S.489 S.404 S.409 S.406 S.400 S.40 S.408 S.40 S.007 = 7/8" Pin Hole Min " Max 7" heck hain Stabilizer /" /8" heck hain Stabilizer S.0076 /4" /" = 7/8" Pin Hole Min /4" Max 6 /" S.009 S.040 S.040 heck hain Stabilizer heck hain Stabilizer S.084 = 7/8" Pin Hole Min " Max 7" /" /8" S.08 /4" /" = 7/8" Pin Hole Min /4" Max 6 /" S.040 S ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.

18 POINT LINKG 9 ord heck hain Stabilizer ssembly S.0446 Min 0 7/64 Max 9/ =/4" olt nd ( /4" Useable) =/" its: 4000 PN96 ord heck hain Stabilizer ssembly S.0447 Min /64 Max /64" =/4" olt nd ( /6" Useable) =/8" its: 000 PN96 ord heck hain Stabilizer ssembly S.97 Min 0 7/64 Max 9/ =/4" olt nd ( /4" Useable) =/8" its: 4000 ord heck hain Stabilizer ssembly S.98 Min /64 Max /64" =/4" olt nd ( /6" Useable) =/8" its: 000 J heck hain Stabilizer ssembly ord Telescopic ar Hole Stabilizer S.0807 (Nonoriginal type) its: 0, 0, 40, 40, 40 (UN) S.0000 S.0446 levis Pin S.0446 S.0809 S.0 S.0008 S.0446 S.668 =8" /" Stabilizer racket S.6684 RH S.668 LH S.668 Uolt =", =7 /", =/8 UN its: ylinder Models S.6669 = /" 7" Stabilizer racket S.6686 RH S.6687 LH S.668 Uolt = /", =8", =/8 UN its: 4 ylinder Models (6>) Telescopic/Threaded ar Hole Stabilizer ar Hole Stabilizer xle racket Pin ord S.609 its: 4000 S.60 RH its: 000, 6000, 7000 (w/out ssistor Ram) S.6 LH its: 000, 6000, 7000, 8000 (w/ ssistor Ram) M S.68 its: 6, 7, 90, 6, 7, 90, 67, 690 eutz S.74 its: X80, 8, 90, 0,.70,.90, 4.0, 4.70 John eere S.88 Reversable Link rms S.89 Standard Link rms its: 60, 80, 00, 0, 640, 840, 040, 40, 040, 40, 4040, 440, 4440 Ø S.600 =/4"ø, = /4", =/4"ø, = /4" its: S.609, S.60, S.6, S.68, S.74 Ø ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only. 8

19 9 POINT LINKG at Lower Link onversion Kit (or Tractors up to 0 HP) S.06 Kit onta: S.08 x (LH & RH) omplete at Quick oupling Hooks to be Welded to the xisting Links S.06 x ontrol Rope for Lower Links, omplete with Spring atches 4 S.000 x Link alls (at ) with Guide ones and King Size Linch P 4 S.0 x djustable Spacer for Lower Link and rms 6 at Lower Link onversion Kit (or Tractors up to 80 HP) S.0 S.0 S.00 S.000 Spacer at Spacer for use with 07 S.00 or S.006 all ( required) at Spacer for use with S.007 all ( required) Reducing ushing at / Reducing ushing for lower link ball S.000 at / Reducing ushing for lower link ball S.00 King Size Linch Pin S.07 SPIL ORR ONLY Kit onta: S.0 x (LH & RH) omplete at Quick oupling Hooks to be welded to the existing links S.06 x ontrol Rope for lower links complete with spring catches S.00 at / Lower Link all, Guide one and Linch Pin ssembly 4 S.0 x djustable Spacer for lower lifting link S.000 x at / Reducing ushing for lower link ball S.00 Lower Link alls for Q/R Linkage (or use with double plate mounting implements) S.0 7/6" Linch Pin fitted to one 08 ssembly S.000 & S.00 S.04 /8" Linch Pin fitted to one 084 ssembly S.00 S.000 S.00 S.00 Lower Link all, Guide one & Linch Pin ssembly at / Lower Link all, Guide one and Linch Pin ssembly at / Lower Link all, Guide one and Linch Pin ssembly at / Lower Link all, Guide one and Linch Pin ssembly S.00 S.006 S.007 at im / / / M 67876M /64" /64" 49/64" 9/64" /" 49/64" /64" /" 49/64" 9 ll parts shown in this catalog are aftermarket products and are not manufactured by the original equipment manufacturers. ny OM part numbers shown are for reference only.