For more information please contact: Jim Woodhead, Works Manager
|
|
- Melvyn Roberts
- 5 years ago
- Views:
Transcription
1 KEYSPLINE ENGINEERING LTD GEAR & TRANSMISSION SPECILISTS STATION WORKS, MASBROUGH STREET, ROTHERHAM, S60 1HT Tel: Fax: Website: We would like to introduce our company to you. Keyspline is a Rotherham based company founded in 1981specialising in the manufacture of precision gears, transmission components and general engineering to a high standard. Our selection of rare capacity machinery allows us to produce both external gears and internal gears along with large splined shafts on a complete supply or a gear-cut only basis. Other specialities are reverse engineering from worn transmission components. For more information please contact: Jim Woodhead, Works Manager
2 GEAR GRINDING CAPACITY NILES 630 C3P Tip and root relief and crowning facility 1 mod to 14 mod pitch 30 m/m min dia. To 700 m/m max. dia. X 215 m/m face Profile grinds teeth on spur and helical gears to 45 helix NILES 315 C3N Tip and root relief and crowning facility 1 mod to 12 mod pitch 30m/m min dia to 350 m/m max dia Profile grinds teeth on spur & helical gears. This machine also has the facility to grind taper or conical gears. KLINGELBERG PSFU 640 INVOLUTE & HELIX TESTER Module Lead 0º - 90º Face 250 m/m Max gear dia 640 m/m GEARCUTTING MACHINERY CAPACITY SUNDERLAND G 150 GEAR PLANER Cuts Spur & Helical Gears 60 o/d 12 face l.5 DP max. pitch Cuts Double Helical Gears 60 o/d 18 face 2 DP max. pitch. SUNDERLAND 16 2 DP 32 o/d x 6 face Cuts Spur/Helical Gears and Sprockets SUNDERLAND 5 3 DP 24 o/d x 4 face Cuts Spur/Helical Gears and Sprockets FELLOWS 30 2 DP 54 o/d x 9.5 face. This machine has 33 riser blocks and cuts internal and external Straight Spur, Combination Gears and Sprockets. Admits 40 under cutter. 8 hole in table allows shafts up to 8 ft long. LORENZ 1000 GEAR SHAPER 3 DP 39 o/d x 31½ i/d x 8 face. This machine has 43 riser blocks and cuts internal and external Straight Spur, Combination Gears and Sprockets. Admits 53¼ long shaft under cutter. FELLOWS 36 3 DP 40 o/d x 8 face. This machine has 18 riser blocks and cuts internal and external Straight Spur, Combination Gears and Sprockets. Also cuts racks 8 face 3 DP.
3 FELLOWS 6A x 2 4 DP 24 o/d x 6 face. This machine has 16 riser blocks and cuts internal and external Straight Spur and Combination Gears and Sprockets. GLEASON 24 STRAIGHT BEVEL GEAR GENERATOR l.25 DP 36 o/d x 6 face. Cuts Coniflex Bevel Gears GLEASON 14 STRAIGHT BEVEL GEAR GENERATOR 3 DP 24 o/d x 4 face. Cuts Coniflex Bevel Gears. LEES BRADNER HH 144 HOBBING MACHINE 30" Over bed 20 Over saddle 1DP x 144 long Cuts Splines, Gears, Wormshafts REINECKER HORIZONTAL GEAR HOBBER 21" Over bed 10" Over saddle 160" Between centre's. CRAVEN HORIZONTAL GEAR HOBBER (1/2)".5DP 40" o/d 240" long Spur Helical and Double Helical. LORENZ HEAVY DUTY HOBBING MACHINE 2 DP 36 o/d x 15 face. Cuts Spur and Helical Gears, Wormwheels and Crowned Gears. HECKERT HOBBING MACHINE 3 DP Swings 22 over bed, 10 over saddle. 88 between centre s. Cuts Splines and Spur and Helical Gears. PFAUTER HOBBING MACHINE 3 DP Swings 12 o/d 36 between centre s. Cuts Splines and Spur and Helical Gears and Wormwheels. BARBER COLEMAN HOBBING MACHINE 3 DP Swings 16 o/d 56 between centre s. Cuts Splines and Spur and Helical Gears and Wormwheels. LEES BRADNER WORMSHAFT HOBBING MACHINE Cuts Wormshafts 2 DP 12 o/d. 36 between centre s.
4 SYKES V400 4 DP 15 o/d 4 face Cuts internal & external Straight Spur Gears SYKES V10 2 x MACHINES PLUS RACK ATACHMENT 5 DP 12 o/d 2.75 face. Cuts Straight Spur Gears and Racks. HEY 20 TOOTH CHAMFERING MACHINE 2 DP 20 o/d Machine chamfers and tooth rounds gear teeth. BARBER COLMAN 16 X 56 GEAR & SPLINE HOBBER 16 dia. X 56 long max. 3 DP max. pitch TURNING CAPACITY GORATU CNC GHT 4 CENTRE LATHE WITH FAGOR CONTROL 8055 Swings 28 over bed 120 between centre s 18" over saddle
5 DSG CNC CENTRE LATHE WITH FAGOR CONTROL Swings 24 over bed 100 between centre s GORATU CNC GHT 5 SIEMENS SHOP TURN 840D Swings 40" over bed 263/4" over saddle 120" between centre's HERBERT 9C30 COMBINATION LATHE Swings 30 over bed 20 over saddle 120 between centre s HERBERT 8 COMBINATION LATHE X 2 Swings 18 over bed 12 over saddle DEAN SMITH & GRACE 1910 TOOLROOM LATHE Swings 19 over bed 10 over saddle 40 between centre s 36 WEBSTER BENNETT VERTICAL BORING MACHINE Swings under beam HOLBROOK TOOLROOM LATHE 12 centre height 60 between centre s ALL LATHES HAVE DIGITAL READOUT GENERAL ENGINEERING CAPACITY KEARNS RICHARDS HORIZONTAL BORING MACHINE Table Travel 36 Cross Travel 27 Height Travel 27 HURON MU6 UNIVERSAL MILLING MACHINE Table Travel 60 Cross Travel 27 Height Travel 20 Fitting with digital readout. ASQUITH 4 FOOT RADIAL ARM DRILLING MACHINE
6 SLOTTING MACHINES FROMAG 1250 X 125 Cuts internal keyways and splines up to 5 (125mm) wide x 49¼ (1250mm) long Max diameter 71 (1800mm) o/d FROMAG 750 X 100 Cuts internal keyways and splines up to 4 (100mm) wide x 30 (762mm) long LUNN DAVIS KEYSEATER Cuts internal keyways 1.25 wide x 6 long MINGANTI SLOTTING MACHINE 20 STROKE 8 BUTLER TOOLROOM SLOTTER GRINDING MACHINES CHURCHILL UAC INTERNAL GRINDER Swings 56 (1422mm) o/d x 18 (460mm) long Internal dia from 1 (25mm) to 50 (1270mm) CHURCHILL CYLINDRICAL GRINDER 16 (406mm) o/d 48 (1220) between centre s CHURCHILL INTERNAL GRINDER Swings 30 (762mm) 10 (254mm) long DELAPENA BEAMSTROKE HONING MACHINE 2 (50mm) to 24 (609mm) internal dia x 30 (762mm) stroke SNOW GRINDER 18 (460mm) rotary table surface grinder NEWALL CYLINDRICAL SWINGS 17" DIA 96" between centre's
7 EXAMPLES OF PREVIOUS WORKS Splined shafts up to 20 (500mm) dia x 144 (3700mm) long Crowned Gears: max dia 36 (900mm) 1.5 DP Gear grinding max pitch 14 mod, max dia 630mm, max face width 215mm. 2 machines capacity, 1 machine has swivel head to grind taper or conical gears.
8 Internal gears 1.5 DP 9.5 (241mm) face width, max dia 54 (1370mm) Internal Straight Sided Splines up to 5 (125mm) wide x 48 (1220mm) long An Internally Splined Planet Carrier
9 A Keyed Drive shaft with Internal Spline. Internal & External Helical Gears Gear grinding max pitch 14 mod, max dia 630mm (24¾ ), max face width 215mm (8½ )
PHOTO ID Manufacturer Model Year CAT Category Description 1 Description Barber Colman 4-4HRS G0826 GEAR CUTTER SHARPENERS (Inclu...
PHOTO ID Manufacturer Model Year CAT Category Description 1 Description 3840 Barber Colman 4-4HRS G0826 GEAR CUTTER SHARPENERS (Inclu... BARBER-COLMAN AUTOMATIC HYDRAULIC HOB SHARPENING MACHINE MODEL #4-4HRS
More information100 years later, and we re still moving forward.
Precision in Motion 100 years later, and we re still moving forward. At Gear Motions, we ve been designing and manufacturing precision gears for more than a century. In that time, we ve built something
More informationPRODUCTS AND SERVICES 2017
PRODUCTS AND SERVICES 2017 www.wagears.com.au INTRODUCTION WA Gears Pty Ltd is a precision gear manufacturing company based in Henderson, Western Australia. We specialise in manufacturing gears and precision
More informationLoudon Industries, Inc. Facility List
Loudon Industries, Inc. Facility List 1 2 Thank you for your interest in Loudon Industries, Inc. We offer a diverse range of machining and engineering capabilities to satisfy our customers diverse requirements.
More information3-DAY ONLINE AUCTION
3-DAY ONLINE AUCTION 1500+ LOTS MACHINE TOOLS GEAR MACHINES CNC MACHINING CENTERS LARGE ASSORTMENT OF INSPECTION & PERISHIABLE TOOLING Surplus Equipment to the Ongoing Needs of: Perry Technology Corporation
More informationEquipment still on site, under power, in Manchester, England. For Full Information & Viewing Appointments please contact our Office:
(2) Online Auction Sales on behalf of a Secured Lender Equipment formerly used in the business of Eaves Engineering Limited (in Administration) Bidding Ends: Wednesday 7th June at 3pm & 4pm (UK Time) Fairfield
More informationQuindos the Ultimate Software package for Gears, Gear Tools and other Special Applications
Quindos the Ultimate Software package for Gears, Gear Tools and other Special Applications Quindos gear packages Gearings Cylindrical Gear Unknown Gear Involute & Lead Master Straight Bevel Gear Spiral
More informationd -2,5 26,5 mm D -3,4 33 mm L mm; МК D mm L mm D mm L mm
KAMAZ Publicly Traded Company Repair and Tooling Plant Tool making 2018 Twist drills Auger drills Drills with a thickened core Centre drills Twist step drills Solid carbide drills Inserted-blade drills
More informationCNC TURNING: MAX OD: Ø 32 MM (1.25 ) MAX OD WITH BAR FEEDER: Ø 32 MM (1.25 ) BAR FEEDER MAX LENGTH: BACK SPINDLE SPEED RANGE:
CNC TURNING: MAX OD: Ø 32 MM (1.25 ) MAX LENGTH: 320 MM MAX OD WITH BAR FEEDER: Ø 32 MM (1.25 ) BAR FEEDER MAX LENGTH: 4400 MM MAX MAIN SPINDLE SPEED 200-8000 RPM BACK SPINDLE SPEED 200-7000 RPM TURRET
More information1.6 Features of common gears
1.6 Features of common gears Chapter 1.2 covered briefly on types of gear. The main gear features are explained here. Helical gear Helical gear has characteristics of transferability of larger load, less
More informationPart VII: Gear Systems: Analysis
Part VII: Gear Systems: Analysis This section will review standard gear systems and will provide the basic tools to perform analysis on these systems. The areas covered in this section are: 1) Gears 101:
More informationOil & Gas. Engineering Machinery
. With combined more than 50 years of experience, BOPM has the ability to produce spur, helical, and bevel gears that will conform to your every specification and deliver the performance your application
More informationSECTION 8 BEVEL GEARING
SECTION 8 BEVEL GEARING For intersecting shafts, bevel gears offer a good means of transmitting motion and power. Most transmissions occur at right angles, Figure 8-1, but the shaft angle can be any value.
More informationInternal Gears. No. of teeth (60) Module (1) Others (Ring Gear) Type (Internal Gear) Material (S45C)
ph: (410)8-10 (0)68-180 fx: (410)8-142 (0)872-929 rfq form: http://mdmetric.com/rfq.htm Internal Internal Miter CP Racks & Pinions Racks Helical Spur SI Steel Internal SIR Steel Ring m0. ~ Page 184 m2
More informationUniversal Horizontal Milling Machines
FUTV-13 Shown with some options Republic Machine Tool Co. Universal Horizontal Milling Machines Higher Standards for Demanding Applications FU-EF Models: FU-13-EF / FU-152-EF / FU-185-EF Universal Horizontal
More informationMILLMATICS High Performance CNC Vertical Knee Mills
Millmatic II 3 axis with some options- Shown with some options Republic Machine Tool Co. MILLMATICS High Performance CNC Vertical Knee Mills MILLMATIC II & III Series 2-Axis CNC with 3-Axis DRO & Manual
More informationGear Tooth Geometry - This is determined primarily by pitch, depth and pressure angle
Gear Tooth Geometry - This is determined primarily by pitch, depth and pressure angle Addendum: The radial distance between the top land and the pitch circle. Addendum Circle: The circle defining the outer
More information11. GEAR TRANSMISSIONS
11. GEAR TRANSMISSIONS 11.1. GENERAL CONSIDERATIONS Gears are one of the most important elements used in machinery. There are few mechanical devices that do not have the need to transmit power and motion
More informationDUDLEY'S" HANDBOOK OF PRACTICAL GEAR DESIGN AND MANUFACTURE. Stephen P. Radzevich
Second Edition DUDLEY'S" HANDBOOK OF PRACTICAL GEAR DESIGN AND MANUFACTURE Stephen P. Radzevich LßP) CRC Press VV J Taylors Francis Group Boca Raton London New York CRC Press is an imprint of the Taylor
More informationINTRODUCTION TO MINI GEARS
INTRODUCTION TO MINI GEARS incorporating COMPONENTS WORLDWIDE Mini Gears, probably best known for manufacturing and sourcing medium to high volume batches of commercial gears and racks for a wide range
More information1 135 teeth to rack
1. A spur gear with 46 teeth, 2.5 module has to be cut on a column and knee type horizontal milling machine with a rotary disc type form gear milling cutter. The 2.5 module cutter no. 3 is used on a blank
More informationTwo Mega events, One Platform
18 5 TH INTERNATIONAL POWER TRANSMISSION EXPO 2018 3 RD INTERNATIONAL EXPO ON GRINDING AND FINISHING PROCESS Two Mega events, One Platform Explore the Great collaboration between Gear and Grinding Technology.
More informationOMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
More informationGeneral gear terms and definitions. Trantorque 48 DP. Steel and Brass
General gear terms and definitions 317 Spur and Helical Gears: Formulae and definitions Helical Gear Spur Gear Term Definition formulae formulae 318 Spur and Helical Gears: Formulae and definitions Helical
More informationchain sprocket SIMPLEX DUPLEX TRIPLEX
chain sprocket SIMPLEX DUPLEX TRIPLEX CHAIN SPROCKET DRIVE The Transmission of mechanical power without slippage and with a high degree of maintained efficiency is a basic function of the Roller Chain
More informationIndex SECTION L PLASTICS
Index SECTION L PLASTICS PRODUCT PAGE SECTION I NON-METALLIC SPROCKETS.... L-2 L-30 SPROCKETS - STOCK NO. 25 ¼" PITCH...L-5 NO. 35 3 8" PITCH...L-6 NO. 40 ½" PITCH...L-7 NO. 50 5 8" PITCH...L-8 NO. 60
More informationThe Power Of Technology & Precision
The Power Of Technology & Precision A Regal Brand Over 90 Years of Experience! Value Proposition Milwaukee Gear manufactures custom steel gears, pinions and assemblies to OEM market leaders that require
More informationGEAR GENERATION GEAR FORMING. Vipin K. Sharma
GEAR GENERATION GEAR FORMING 1 GEAR MANUFACTURING Manufacturing of gears needs several processing operations in sequential stages depending upon the material and type of the gears and quality desired.
More informationGear Engineering Data. Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables
Engineering Gear Engineering Data Spur Gear Gear Formulas Drive Selection Horsepower and Torque Tables G-79 Gear Selection Stock Spur Gear Drive Selection When designing a stock gear drive using the horsepower
More informationMore Detail about Helical & Bevel Helical Reduction Gear Boxes.
More Detail about Helical & Bevel Helical Reduction Gear Boxes. For Inspection & Checking of these Housings we have Brown & Sharpe (USA) CNC CMM with full automatic rotating Renishaw Probe Head with Inspection
More informationGEAR NOISE REDUCTION BY NEW APPROACHES IN GEAR FINISHING PROCESSES
GEAR NOISE REDUCTION BY NEW APPROACHES IN GEAR FINISHING PROCESSES Nikam Akshay 1, Patil Shubham 2, Pathak Mayur 3, Pattewar Vitthal 4, Rawanpalle Mangesh 5 1,2,3,4,5 Department of Mechanical Engineering,
More informationGMS 32. Double flank testing machine for gears
GMS 32 Double flank testing machine gears Specifications max. diameter of measured gear 100 mm (4'') max. diameter of master gear 80 mm center distance 0... 90mm max. weight of gear 0.5 kg max. testing
More informationMANUFACTURING OF GEAR BOXES
Profile No.: 29 NIC Code: 29301 MANUFACTURING OF GEAR BOXES 1. INTRODUCTION: Gears play a prominent role in mechanical power transmission. A gear or cogwheel is a rotating machine part having cut teeth,
More informationCHAPTER 3 page 35 PRINCIPLES OF GEAR-TOOTH GENERATION. .1 Angular Velocity Ratio
CHAPTER 1 page 1..., ATURE, NOTATION AND CONVENTIONS TYPES OF GEAR 1.1 Spur 1.2 Helical 1.3 Double-Helical 1.4 Crossed Helical 1.5 Conical Involute 1.6 Bevel 1.7 Spiral Bevel 1.8 Hypoid 1.9 Worm NOMENCLATURE
More information05 Marks (c) Sketch and explain Lancashire Boiler.
Model question paper No.1 1. Answer any FIVE full questions choosing at least two questions from part A & two questions from part B 2. Use of steam tables is permitted 1. (a) Discuss briefly the different
More informationTooth thickness Dedendum. Addendum. Centre distance Nominal
FORMULAS SPUR GEARS TO FIND:- PCD ØD MODULE No. of TEETH CP ADDENDUM DEDENDUM MODULE No. of TEETH x MOD (mm) (No. of TEETH + ) x MOD (mm) 5.4 MODULE CP π (mm) PCD MODULE (mm) MODULE x π (mm) MODULE (mm)
More informationGIRTH GEARS AND PINIONS OVERVIEW
GIRTH GEARS AND PINIONS OVERVIEW Girth Gears & Pinions Tubular mills and rotary kiln operations are the life support system for the processing industries, and necessitates reliable and uninterrupted operations.
More informationINTRODUCTION TO MINI GEARS
INTRODUCTION TO MINI GEARS incorporating COMPONENTS WORLDWIDE Mini Gears, probably best known for producing and sourcing medium to high volume batches of commercial gears and racks for a wide range of
More informationSpeed Matters In Racing and in Hobbing
Speed Matters In Racing and in Hobbing RCD Engineering s switch from manual to CNC hobbing operations breaks gear manufacturing lead time records with Bourn & Koch 100H in their gear production pit crew
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationGears And Gear Drives (India) Pvt Ltd
Gears And Gear Drives (India) Pvt Ltd Design and manufacturers of Lifting Systems An ISO 9001-2015 Certified Company. Seshagiri Managing Director Gears and Gear Drives (India) Pvt Ltd Motion Technology,
More informationTechnology of Machine Tools
PowerPoint to accompany Technology of Machine Tools 6 th Edition Krar Gill Smid Gear Cutting Unit 70 Copyright The McGraw-Hill Companies, Inc. Permission required for reproduction or display. 70-2 Objectives
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationHelical Gears. Section Contents
Section Contents CATALOG NUMER / DIMENSIONS... 64-65 SELECTION PROCEDURE... 66 HORSEPOWER & TORQUE RATINGS... 67-68 STOCK ALTERED / CUSTOM HELICAL GEARS... 3-5 HELICAL GEAR ENGINEERING INFORMATION... 308-314
More informationModel FF8000 Flange Facer
Model FF8000 Flange Facer Machine Features Components & Accessories Specifications Technical Data Portable Machine Tools, Inc. Get big flange faces back in working condition - FAST! FF8000 Features Versatile
More informationSpur Gears. Helical Gears. Bevel Gears. Worm Gears
Spur s General: Spur gears are the most commonly used gear type. They are characterized by teeth which are perpendicular to the face of the gear. Spur gears are by far the most commonly available, and
More informationMachining Centre. CNC Lathes. Machining Centre, CNC Mills and Lathes, Turret Mills, Drills, Saws & Miscellaneous
Machining Centre, CNC Mills and Lathes, Turret Mills, Drills, Saws & Miscellaneous Machining Centre End of Line Gate Eclipse VMC-610 Vertical Machining Centre 3 Axis Anilam 6000M control Year of Manufacture:
More informationPLANT LIST January 2018
Dugard Eagle HBM4 Horizontal Borer Fanuc 21i Control X-axis 2200 mm Y-axis 1600 mm Z-axis 1600 W-axis 550 (quill) (with 360 deg B-axis) Fitted with Renishaw Spindle Probing and Inspection Plus Software
More informationGEAR & HEAVY MACHINING FACILITY
GEAR & HEAVY MACHINING FACILITY 407 KLIN STREET LUFKIN, TX 75902 BIDDING CLOSES WEDNESDAY, MAY 29 TH @ 1:00 P.M. EDT Inspection By Appointment Only: WEDNESDAY, MAY 22 RD & THURSDAY, MAY 23 RD From 8:00
More informationCH#13 Gears-General. Drive and Driven Gears 3/13/2018
CH#13 Gears-General A toothed wheel that engages another toothed mechanism in order to change the speed or direction of transmitted motion The gear set transmits rotary motion and force. Gears are used
More information» Precision Tooth Flank Grinding
» Precision Tooth Flank Grinding Stelter Spur Gears with Ground Tooth Flanks. Straight and helical gearing from module 0.5 to module 34. At diameters up to 1600 mm. made by magic hands » High-Tech, Robotics,
More informationDEPARTMENT OF MECHANICAL ENGINEERING Subject code: ME6601 Subject Name: DESIGN OF TRANSMISSION SYSTEMS UNIT-I DESIGN OF TRANSMISSION SYSTEMS FOR FLEXIBLE ELEMENTS 1. What is the effect of centre distance
More informationAF / AFR Series. AFR Series
AF / AFR Series haracteristic Highlights Equipped with solid uncaged needle roller bearings, provides maximum contact points to increase stiffness and generates high output torque. True helical gear design
More informationProgram Internal Gear Set Profile Shift Coefficients With Zero Backlash Introduction
Program 60-107 Internal Gear Set Profile Shift Coefficients With Zero Backlash Introduction The purpose of this model is to provide data for a gear set when the tooth thickness and/or the center distance
More informationAN OPTIMAL PROFILE AND LEAD MODIFICATION IN CYLINDRICAL GEAR TOOTH BY REDUCING THE LOAD DISTRIBUTION FACTOR
AN OPTIMAL PROFILE AND LEAD MODIFICATION IN CYLINDRICAL GEAR TOOTH BY REDUCING THE LOAD DISTRIBUTION FACTOR Balasubramanian Narayanan Department of Production Engineering, Sathyabama University, Chennai,
More informationBevel Gears. Catalog Number of KHK Stock Gears. Bevel Gears M BS G R. Gears. Spur. Helical. Gears. Internal. Gears. Racks. CP Racks.
MHP High-Ratio Hypoid Ground Spiral G Ground Spiral 15 ~ 200 2 m1, 1.5 Page 456 m2 ~ 4 Page 458 m2 ~ 4 Page 460 Spur MBSA MBSB Finished Bore Spiral Spiral 1.5 ~ 4 SBZG Ground Zerol 1.5, 2 Helical m2 ~
More informationTechnical Publications Catalog. October 2015
Technical Publications Catalog October 2015 Table of Contents How to Purchase Documents... 1 Index of AGMA Standards and Information Sheets by Number... 1 Index of AGMA Standards and Information Sheets
More informationInvolute Simulation Softwares Inc.
Involute Simulation Softwares Inc. Updates / Recent changes Claude Gosselin, Ph.D., P.Eng. 2012-2017 www.hygears.com 1 Updates Contents HyGEARS update 29 November 2017 - Build 405.90-462... 3 HyGEARS and
More informationKISSsoft 03/2017 Tutorial 15
KISSsoft 03/2017 Tutorial 15 Bevel gears KISSsoft AG Rosengartenstrasse 4 8608 Bubikon Switzerland Tel: +41 55 254 20 50 Fax: +41 55 254 20 51 info@kisssoft.ag www.kisssoft.ag Contents 1 Starting KISSsoft...
More informationLecture (7) on. Gear Measurement. By Dr. Emad M. Saad. Industrial Engineering Dept. Faculty of Engineering. Fayoum University.
1 Lecture (7) on Gear Measurement Fayoum University By Dr. Emad M. Saad Industrial Engineering Dept. Faculty of Engineering Fayoum University Faculty of Engineering Industrial Engineering Dept. 2015-2016
More informationDirection of Helix (R) No. of Teeth (20) Module (1) Others (Ground Gear) Type (Helical Gear) Material (SCM440)
KH round Series Newly added m1 ~ 3 Page 168 SH Steel m2, 3 Page 178 CP acks acks Catalog Number of KHK Stock The Catalog Number for KHK stock gears is based on the simple formula listed below. Please order
More informationChapter 3. Transmission Components
Chapter 3. Transmission Components The difference between machine design and structure design An important design problem in a mechanical system is how to transmit and convert power to achieve required
More informationSECTION 4 SPUR GEAR CALCULATIONS
Function of α, or invα, is known as involute function. Involute function is very important in gear design. Involute function values can be obtained from appropriate tables. With the 3.1 Contact Ratio center
More informationHEAVY EQUIPEMENTS R.C.DAS ENGINEERING
MANUFACTURING HEAVY EQUIPEMENTS R.C.DAS ENGINEERING Engineering Excellence PRODUCTS CLINKER HAMMER CRUSHER Clinker is a Lump or Nodules (usually 3-25mm diameter) which is produced by sintering Limestone
More informationKISSsoft 03/2013 Tutorial 15
KISSsoft 03/2013 Tutorial 15 Bevel gears KISSsoft AG Rosengartenstrasse 4 8608 Bubikon Switzerland Tel: +41 55 254 20 50 Fax: +41 55 254 20 51 info@kisssoft.ag www.kisssoft.ag Contents 1 Starting KISSsoft...
More informationMachine park Dreiling Maschinenbau GmbH
Machine park Dreiling Maschinenbau GmbH 5-axes CNC boring mill Union PCR 150 - X-axis: 8,000 mm - tool holding fixture: SK 50 - Y-axis: 3,000 mm - driving power: 47 kw - Z-axis: 1,500 mm - speed range:
More informationTHONBURILOHA ENGINEERING COMPANY PROFILE
THONBURILOHA ENGINEERING COMPANY PROFILE ก 19. 30 ก ก ก. 10140. 02-4271471, 02-4275625, 02-4277757 FAX. 02-4277820 ก / ก ก ก. ก ก ก ก ก 42 ก ก ก ก ก ก ก 4 8 ก 20 ก ก ก ก ก ก Managing Director ก THONBURILOHA
More informationDisc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
More informationCHAPTER 5 PREVENTION OF TOOTH DAMAGE IN HELICAL GEAR BY PROFILE MODIFICATION
90 CHAPTER 5 PREVENTION OF TOOTH DAMAGE IN HELICAL GEAR BY PROFILE MODIFICATION 5.1 INTRODUCTION In any gear drive the absolute and the relative transmission error variations normally increases with an
More informationPLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Yes Yes Yes Yes Yes Yes Standard Yes Yes Yes Yes Yes Yes P.t.o. Yes Yes
More informationE-1236VS, ELITE 12X36 EVS LATHE
EVS LATHES COMPACT. POWERFUL. PERFECTION. These lathes pack large lathe features into compact footprints that make them perfect for schools, small shops, and engineering labs. Featuring an Electro-magnetic
More information6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
More informationTECHNOLOGY MECHANISMS
TECHNOLOGY MECHANISMS 3º ESO IES CHAN DO MONTE URTAZA 1 WHAT IS A MECHANISM? Mechanism are devices that have been designed to make jobs easier. They all have certain things in common: They involve some
More informationDRAFT. KISSsoft Release 03/2013. Changes from Release 03/2012 to Release 03/2013. KISSsoft AG Rosengartenstrasse Bubikon Switzerland
KISSsoft Release 03/2013 Changes from Release 03/2012 to Release 03/2013 DRAFT KISSsoft AG Rosengartenstrasse 4 8608 Bubikon Switzerland Tel: +41 55 254 20 50 Fax: +41 55 254 20 51 info@kisssoft.ag www.kisssoft.ag
More informationNorden. A Lancashire Mill Engine. Scale: 1:12
Scale: 1:12 Neil M. Wyatt February 2009 Fig. 1: General Arrangement General Arrangement Sheet: 1 An Old Steam Engine DEAR SIR, In the ruins of an old mill at, near Rochdale, there is an old steam engine
More informationTechnical Publications Catalog. October 2016
Technical Publications Catalog October 2016 Table of Contents How to Purchase Documents... 1 Index of AGMA Standards and Information Sheets by Number... 1 Index of AGMA Standards and Information Sheets
More informationSYNCHRONOUS BELT DRIVES
Experience The PTH-98 SYNCHRONOUS BELT DRIVES EMERSON POWER TRANSMISSION MORE HORSEPOWER PER DOLLAR... For Positive Performance, Choose... BROWNING Panther Synchronous Drive Systems. Todays Choice For:
More informationMulti-Purpose Milling Machine
Multi-Purpose Milling Machine MF most widely used milling machine type world-wide! MF 1 speed change through v-belt change-over Multi-Purpose Milling Machine for workshops, single part production, design,
More informationAvailable in July 2010
Available in July 2010 SGFD/SGFK/SGCPFD Ground acks m0.5~ 18 items engths : 0, 0 and 1000mm CP5~20 8 items engths : 0 and 1000mm The product line-up for the popular J-Series has expanded! Quick-touse Ground
More informationGEAR CONTENTS POWER TRANSMISSION GEAR TYPES OF GEARS NOMENCLATURE APPLICATIONS OF GEARS VELOCITY RATIO GEAR TRAINS EXAMPLE PROBLEMS AND QUESTIONS
GEAR CONTENTS POWER TRANSMISSION GEAR TYPES OF GEARS NOMENCLATURE APPLICATIONS OF GEARS VELOCITY RATIO GEAR TRAINS EXAMPLE PROBLEMS AND QUESTIONS GEAR.. Power transmission is the movement of energy from
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationMMS Spiral Miter Gears. SMS Spiral Miter Gears. m1 ~ 8 Page 268. SAM Angular Miter Gears. m1 ~ 4 Page 278. Direction of Spiral ( R )
Miter Spur MMSG Ground Spiral Miter SMSG Ground Spiral Miter MMSA MMSB Finished Bore Spiral Miter MMS Spiral Miter SMS Spiral Miter SMZG Ground Zerol Miter SMA SMB SMC Finished Bore Miter Series Series
More informationPRECISION GROUND GEARS Spur & Helical Gears
Spur & Helical Gears Description Symbol Unit Equation Normal Module m n Transverse Module m t = m n / cos b Axial Module m x = m n / sin b Normal Pressure Angle a n degrees = 2 Transverse Pressure Angle
More informationOrder Code CNC Trainer A - CNC Lathe Trainer
29901A - CNC Lathe Trainer Type of Control System : PLC based System Main Spindle Drive : AC Motor with VFD Z and X Drives : Steppe, Drive with Ramp function Input to Stopper : Optically Isolated Run Speed
More informationDisc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
More informationQuestion 8 Engineering Higher Level
Rack and Pinion Rotary motion to linear motion As pinion rotates, gear teeth mesh with those on rack Applications: Lowering table on pillar drill ; Steering in Car Worm and Worm wheel Transmits power through
More informationNAME OF TRADE :- WELDER MAKE/ MODEL SPECIFICATION. 400A capacity with air cooled. 25 mm No. 15 KVA No
SI NO NAME OF TRADE :- WELDER WITH 1 D.C Arc welding rectifiers set with all accessories (400 A. OCV 60 100 V, 60% duty cycle ) 2 GMAW welding machine 400A capacity with air cooled torch, Regulator, Gas
More informationGraphical representation of a gear
Homework 4 Gears Gears are designed to transmit rotary motion. Often they are arranged in a gear train (meshed together). Gear trains provide a change in speed, torque (turning force) and direction (clockwise
More informationTribology Aspects in Angular Transmission Systems
Tribology Aspects in Angular Transmission Systems Part II Straight Bevel Gears Dr. Hermann Stadtfeld (This is the second of an eight-part series on the tribology aspects of angular gear drives. Each article
More informationFOR MORE INFORMATION CALL CLARK ROLLER CHAIN SPROCKETS INDEX...E-1 - E-2 MADE-TO-ORDER CAPABILITIES...
Index SECTION E ROLLER CHAIN PRODUCT PAGE INDEX...E- - E-2 MADE-TO-ORDER CAPABILITIES...E- SECTION I STANDARD...E-4 - E-2 Shear Pin Sprockets, Bolt-On...E-4 - E-6 Type D Sprockets, Detachable s Split and
More informationSERIAL NUMBERS
J.E. LOVE COMPANY TREE SEEDLING HARVESTER SERIAL NUMBERS 103-114 FORESTRY PRODUCTS GROUP P.O. BOX 188 GARFIELD, WA 99130-0188 PHONE: (509) 635-1321 FAX: (509) 635-1434 Manufacturers of Special Harvesting
More informationIntroduction to Gears. First Edition
Introduction to Gears First Edition Preface The history of gears is probably as old as civilization itself. And yet today, the importance of gears in manufacturing industry is undwindling and even more
More informationSpecification: Pulleys XL Pitch... PT10-3. L Pitch... PT H Pitch... PT10-6 XH Pitch... PT10-7 Reborable... PT10-9
CONTENTS DYNA-SYNC Drives Features/Benefits.......................................... PT10-2 Specification: Pulleys XL Pitch................................................ PT10-3 L Pitch.... PT10-4 H
More informationPneumatic & hydraulic drive options available. Chucking system can be removed to allow the flange facer to be facemounted.
FF8200 FLANGE FACER A HEAVY - DUTY FLANGE FACER WITH FACING AND MILLING CAPABILITIES Rugged Machine Design Large, heavy duty construction-grade bearings provide powerful, rigid performance throughout the
More informationGHT Technical description of basic machine
GHT8-2000 Technical description of basic machine GHT 8 1 05-2010 Technical characteristics Capacity Height of centres... 1050 mm Swing over bed...... 2000 mm Swing over cross slide... 1300 mm Max. distance
More informationSTRAIGHT SPUR GEARS and RACKS
STRAIGHT SPUR GEARS and RACKS SPUR GEARS WITH LATERAL HUB page 4 SPUR GEARS WITHOUT HUB 7 RACKS 9 SPUR GEARS AND RACKS SPUR GEARS AND RACKS SPUR GEARS WITHOUT HUB SPUR GEARS WITH LATERAL HUB RACKS STRAIGHT
More informationENGINEERING & SERVICES PVT LTD
ENGINEERING & SERVICES PVT LTD www.sankalpenggservices.com CERTIFICATIONS About Sankalp Incorporated in 1996, Sankalp focused in Oil & Gas Field Components, primarily OCTG, Well Head, Drilling and Down
More informationTaper Bore Sprockets. Sprockets. 06B 3/8" x 7/32" BS Taper Bore Sprockets. c r 3. SPROCKET mm CHAIN mm Tooth Radius r 3
Sprokets Taper Bore Sprokets BS Taper Bore Sprokets 06B 3/8" x 7/32" SPROCKET mm CHIN mm Tooth Radius 10.0 Pith 9.525 Chamfer 1.0 Width Between Inner Plates 5.720 Tooth Width b1 5.2 Roller Diameter 6.350
More information