CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY
|
|
|
- Aubrie Eaton
- 6 years ago
- Views:
Transcription
1 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY ALUMINIUM CABLE LADDER CABLE TRUNKING PRODUCT CATALOGUE Electrical Cable Containment REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY 1
2 Who we are Founded in 2005 by Directors Hayden Froggatt and John Almond, MSS Ltd is an innovative and forward thinking company, supplying and installing cable containment systems to the electrical and mechanical sectors. Experience, sound product knowledge and practised efficiency means MSS can provide you with the best and most cost effective solution for your needs. MSS is accredited under the ISO 9001 for quality management systems and ISO for safety management systems. What we do Cable Ladder/Cable Tray/Cable Basket/Metal Framing Systems/Solid Trunking and Skirting Duct Systems/Pipe Supports/Seismic Design and Supply/Installation/Bespoke Fabrication Why MSS We are specialists in: Cable & Pipe Support System Mechanical & Electrical Installations Design/Engineering/Supply/Installation Specialised Mechanical Installations Skirting & Power Duct Interior Fitouts Special Fabrication and Engineering We can design, engineer, manufacture and install to your specifications providing you with quality products, on time and within budget. General and Bespoke Fabrication Our main focus is on light to medium steel fabrication, with an emphasis on small production runs and one-off high end bespoke works. Our scope and skill set is broad due to a wide range of the latest technology available in-house including the latest in automated plant and equipment. We regularly update our capital equipment to ensure jobs are executed to the highest standard, on time and within budget. Our highly trained team of Designers, Fabricators and Welders pride themselves on delivering precision design and engineering in Aluminium, Steel and Stainless Steel. MECHANICALSUPPORT.CO.NZ Mechanical Support Systems. Mechanical 0508 Support 0508 CABLE Systems CABLE reserves TRAY the TRAY right to SALESINFO@MECHANICALSUPPORT.CO.NZ change designs and specifications without notice.
3 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R INDEX Cable Tray: Cable Trunking: Page Cable Tray 2 Splice Plate 3 Bolts and Nuts 4 Hold Down Washer 4 Hold Down Bracket 5 Link Plate 6 Radius Plate Pressing 7 Tee Bracket 8 Divider Strip 9 Hanger Bracket 10 Page Trunking Body & Lid 25 Cable Trunking Joiners 26 Horizontal Bend - Lid On Top 27 Vertical Bend - Lid on Outside 28 Vertical Bend - Lid on Inside 29 Horizontal Bend - Lid On Inside 29 Horizontal T-Section - Lid On Top 30 Horizontal T-Section - Lid On Outside 31 Horizontal Bend - Lid On Outside 31 Horizontal T-Section - Lid On Inside 32 4-Way Cross Section 33 Flange Adaptor 34 Aluminium Cable Ladder: Twist Adaptor 35 End Cap 36 Page NEMA Aluminium Cable Ladder Splice Plate 14 Bolts and Nuts 14 Internal Hold Down Washer 15 External Hold Down Bracket 15 Adjustable Vertical Elbow 16 Adjustable Horizontal Hinge Horizontal Bend Horizontal Bend Internal Vertical Riser External Vertical Dropper 18 Horizontal Equal Tee Section 19 Horizontal Equal Cross Section 19 Concentric Reducer 20 Left/Right Hand Reducer 20 Reducer Joiners 21 Aluminium Lid Covers 22 REGISTERED COMPANY Mechanical Support Systems. Mechanical Support Systems reserves the the right right to change to designs and and specifications without without notice. notice.
4 PRODUCTION Machines and Scope Metal Fabrication CUTTING: Guillotine, band saw, gas cutting, punch and shear Plate cutting up to 6mm steel Batch cutting Hole punching Forming and bending: Press brake, pan folder, bulldozer bender 0.5mm thick to 6mm steel Adjustable jig for flat bar bending WELDING: Tig, Mig or Arc Pulsed Mig and Tig welder COIL PRODUCTION: Power press, de-coiling unit Punch, press and cut Medium to large production runs FINISHING: Powder Coating, Galvanising, Zinc Plating, Anodising, and Polishing CUTTING FORMING WELDING FINISHING MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY
5 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY CABLE TRAY REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 1
6 CABLE TRAY EMT3 Cable Tray 300 EMT3 Allowable Loading (1.5 FOS) Load (kg/m) Standard Length: 3.0m Standard Finish: Pre-Galvanised Cable Laying Depth: 45mm Span (m) Width W : Part Number: 176 EMT3/150 PG 326 EMT3/300 PG 476 EMT3/450 PG 626 EMT3/600 PG EMT5 Cable Tray EMT5 Allowable Loading (1.5 FOS) 600 Load (kg/m) Span (m) Standard Length: 3.0m Standard Finish: Pre-Galvanised Cable Laying Depth: 79mm Width W : Part Number: 176 EMT5/150 PG 326 EMT5/300 PG 476 EMT5/450 PG 626 EMT5/600 PG 2 2 MECHANICALSUPPORT.CO.NZ CABLE CABLE TRAY TRAY SALESINFO@MECHANICALSUPORT.CO.NZ SALESINFO@MECHANICALSUPPORT.CO.NZ
7 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY - ACCESSORIES EMT3/SP Splice Plate Application Example: EMT3/SP Splice Plate EMT5/SP Splice Plate Application Example: EMT5/SP Splice Plate REGISTERED COMPANY Mechanical Support Systems. Mechanical Mechanical Support Support Systems Systems reserves reserves the right the to right change to change designs designs and specifications and specifications without without notice. notice. 3 3
8 CABLE TRAY - ACCESSORIES EMT/TB Bolt & EMT/TN Nut EMT/TB Bolt Available in ZP or HDG EMT/TN Nut Available in ZP or HDG EMT/HDW Hold Down Washer EMT/HDW Hold Down Washer Suitable for EMT3 and EMT5 Series Cable Tray Application Example: Hold Down Washers can be used on EMT3 and EMT5 Series Cable Tray 4 4 MECHANICALSUPPORT.CO.NZ CABLE CABLE TRAY TRAY SALESINFO@MECHANICALSUPORT.CO.NZ SALESINFO@MECHANICALSUPPORT.CO.NZ
9 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY - ACCESSORIES EMT3/EXT/HDB Hold Down Bracket Application Example: Hold Down Bracket can be fastened to channel, walls, floors, ceilings etc EMT3/EXT/HDB Hold Down Bracket EMT5/EXT/HDB Hold Down Bracket Application Example: Hold Down Bracket can be fastened to channel, walls, floors, ceilings etc EMT5/EXT/HDB Hold Down Bracket REGISTERED COMPANY Mechanical Support Systems. Mechanical Mechanical Support Support Systems Systems reserves reserves the right the to right change to change designs designs and specifications and specifications without without notice. notice. 5 5
10 CABLE TRAY - ACCESSORIES EMT3/LP Link Plate Application Example: Link Plate (External Riser) 1. Cut both tray sides down to the bottom face. 2. Bend the tray along the bottom face and secure on the inside with Link Plates and fasteners. (2 cuts in each side result in a 90 riser) Link Plate (Internal Riser) EMT3/LP Link Plate 1. Cut both tray sides up to the top face. 2. Bend the tray along the top face and secure on the inside with Link Plates and fasteners. (2 cuts in each side result in a 90 riser) EMT5/LP Link Plate Application Example: Link Plate (External Riser) 1. Cut both tray sides down to the bottom face. 2. Bend the tray along the bottom face and secure on the inside with Link Plates and fasteners. (3 cuts in each side result in a 90 riser) Link Plate (Internal Riser) 1. Cut both tray sides up to the top face. 2. Bend the tray along the top face and secure on the inside with Link Plates and fasteners. (3 cuts in each side result in a 90 riser) EMT5/LP Link Plate 6 6 MECHANICALSUPPORT.CO.NZ CABLE CABLE TRAY TRAY SALESINFO@MECHANICALSUPORT.CO.NZ SALESINFO@MECHANICALSUPPORT.CO.NZ
11 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY - ACCESSORIES EMT3/RPP Radius Plate Pressing EMT3/RPP Radius Plate Pressing EMT5/RPP Radius Plate Pressing EMT5/RPP Radius Plate Pressing Application Example: Cut sides at top and bottom flanges only Cut outside walls of tray right through (3 cuts in each side result in a 90 bend) Radius Plate Pressing Form Radius Plate Pressing to suit. Cut to length before fixing with fasteners. REGISTERED COMPANY Mechanical Support Systems. Mechanical Mechanical Support Support Systems Systems reserves reserves the right the to right change to change designs designs and specifications and specifications without without notice. notice. 7 7
12 CABLE TRAY - ACCESSORIES EMT3/TEE Tee Bracket Application Example 1: 3-Way Tee Application Example 2: 4-Way Cross EMT3/TEE Tee Bracket EMT5/TEE Tee Bracket Application Example 1: 3-Way Tee Application Example 2: 4-Way Cross EMT5/TEE Tee Bracket 8 8 MECHANICALSUPPORT.CO.NZ CABLE CABLE TRAY TRAY SALESINFO@MECHANICALSUPORT.CO.NZ SALESINFO@MECHANICALSUPPORT.CO.NZ
13 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRAY - ACCESSORIES EMT3/DIVIDER Divider Strip Application Example: EMT3/DIVIDER Divider Strip EMT5/DIVIDER Divider Strip Application Example: EMT5/DIVIDER Divider Strip REGISTERED COMPANY Mechanical Support Systems. Mechanical Mechanical Support Support Systems Systems reserves reserves the right the to right change to change designs designs and specifications and specifications without without notice. notice. 9 9
14 CABLE TRAY - ACCESSORIES KBSI/THB PG Single Hanger Bracket KBSI/THB Single Hanger Bracket Standard Finish: Pre-Galvanised Width A : Width B : Height C : Part Number: Suits Cable Tray Width: KBSI/THB/150 PG 75, 100 & 150mm KBSI/THB/200 PG 200mm KBSI/THB/300 PG 300mm Application Example: KBSI/THB Hanger Bracket shown clamped to Cable Tray using Hold Down Washer, suspended using Threaded Rod. The vertical section of the Hanger Bracket can be mounted to either side of the Cable Tray. (Hold Down Washer and Threaded Rod not included) 1010 MECHANICALSUPPORT.CO.NZ CABLE CABLE TRAY TRAY SALESINFO@MECHANICALSUPORT.CO.NZ SALESINFO@MECHANICALSUPPORT.CO.NZ
15 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER CABLE Cable Ladder LADDER ACCESSORIES CABLE LADDER REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 11
16 CABLE LADDER NEMA Aluminium Cable Ladder EM/N12A: EM/N12B: EM/N16A: Cable Laying Depth: 58mm Basic Load Capacity: 3m span Standard Length: 6.0m Rung Spacing: 300mm Nom. Material: Aluminium Cable Laying Depth: 86.5mm Basic Load Capacity: 3m span Standard Length: 6.0m Rung Spacing: 300mm Nom. Material: Aluminium Cable Laying Depth: 77mm Basic Load Capacity: 3m span Standard Length: 6.0m Rung Spacing: 300mm Nom. Material: Aluminium Width W : Part Number: 150 EM/N12A/150 AL 300 EM/N12A/300 AL 450 EM/N12A/450 AL 600 EM/N12A/600 AL 750 EM/N12A/750 AL 900 EM/N12A/900 AL Width W : Part Number: 150 EM/N12B/150 AL 300 EM/N12B/300 AL 450 EM/N12B/450 AL 600 EM/N12B/600 AL 750 EM/N12B/750 AL 900 EM/N12B/900 AL Width W : Part Number: 150 EM/N16A/150 AL 300 EM/N16A/300 AL 450 EM/N16A/450 AL 600 EM/N16A/600 AL 750 EM/N16A/750 AL 900 EM/N16A/900 AL EM/N12A Cable Ladder Allowable Loading* (1.5 FOS) EM/N12B Cable Ladder Allowable Loading* (1.5 FOS) EM/N16A Cable Ladder Allowable Loading* (1.5 FOS) Load (kg/m) Load (kg/m) Load (kg/m) Load (kg/m) Span (m) Span (m) Span (m) Span (m) *Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m. *Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m. *Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m. Load (kg/m) m Span EM/N12A Cable Ladder Deflection** Chart 5 3m Span 4m Span 5m Span 6m Span Load (kg/m) m Span EM/N12B Cable Ladder Deflection** 3m Span 4m Span 5m Span 6m Span Load (kg/m) EM/N16A Cable Ladder Deflection** 2m Span 3m Span 4m Span 5m Span 6m Span Deflection Deflection Deflection **Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation factors (such as location of connectors and support etc). **Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation factors (such as location of connectors and support etc). **Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation factors (such as location of connectors and support etc). All load testing performed on 600mm ladder width and complies to all NEMA VE1 standards. 12 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
17 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER NEMA Aluminium Cable Ladder EM/N20A: Cable Laying Depth: 97mm Basic Load Capacity: 3m span Standard Length: 6.0m Rung Spacing: 300mm Nom. Material: Aluminium Width W : Part Number: 150 EM/N20A/150 AL 300 EM/N20A/300 AL 450 EM/N20A/450 AL 600 EM/N20A/600 AL 750 EM/N20A/750 AL 900 EM/N20A/900 AL EM/N20A EM/N20A Cable Ladder Cable Mesh Allowable Allowable Loading* Loading (1.5 (1.5 FOS) FOS) Load (kg/m) Load (kg/m) Span (m) Span (m) *Maximum allowable loads are determined by the failure of a single span using a factor of safety of 1.5. It is generally recommended to not use an unsupported span greater than 2m. 900 EM/N20A Cable Ladder Deflection** Chart 5 Load (kg/m) m Span 3m Span 4m Span 5m Span 6m Span Deflection **Deflection shown above is to be used as a guide only. Actual deflection may vary depending on installation factors (such as location of connectors and support etc). All load testing performed on 600mm ladder width and complies to all NEMA VE1 standards. REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 13
18 CABLE LADDER ACCESSORIES Splice Plate - 12A, 12B, 16A, 20A Application Example: To Suit Ladder Type: Part Number: 12A EM/N12A/SP AL 12B EM/N12B/SP AL 16A EM/N16A/SP AL 20A EM/N20A/SP AL EMT/TB Bolt & EMT/TN Nut EMT/TB Bolt Available in ZP or HDG EMT/TN Nut Available in ZP or HDG 14 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
19 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER ACCESSORIES Internal Hold Down Washer Application Example: EM/NHDW AL Internal Hold Down Washer (Generic for all ladder) External Hold Down Bracket Application Example: To Suit Ladder Type: Part Number: 12A EM/N12A/HDB AL 12B EM/N12B/HDB AL 16A EM/N16A/HDB AL 20A EM/N20A/HDB AL REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 15
20 CABLE LADDER ACCESSORIES Adjustable Vertical Elbow 1 set per transition To Suit Ladder Type: Part Number: 12A EM/N12A/AVE AL 12B EM/N12B/AVE AL 16A EM/N16A/AVE AL 20A EM/N20A/AVE AL Adjustable Horizontal Hinge 2 sets per transition To Suit Ladder Type: Part Number: 12A EM/N12A/AHE AL 12B EM/N12B/AHE AL 16A EM/N16A/AHE AL 20A EM/N20A/AHE AL 16 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
21 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER ACCESSORIES 90 Horizontal Bend Cable Ladder: Inside Radius: Width: Part Number: 12A EM/N12A/HB90/150 AL 300 EM/N12A/HB90/300 AL 450 EM/N12A/HB90/450 AL 600 EM/N12A/HB90/600 AL 750 EM/N12A/HB90/750 AL 900 EM/N12A/HB90/900 AL 12B EM/N12B/HB90/150 AL 300 EM/N12B/HB90/300 AL 450 EM/N12B/HB90/450 AL 600 EM/N12B/HB90/600 AL 750 EM/N12B/HB90/750 AL 900 EM/N12B/HB90/900 AL 16A EM/N16A/HB90/150 AL 300 EM/N16A/HB90/300 AL 450 EM/N16A/HB90/450 AL 600 EM/N16A/HB90/600 AL 750 EM/N16A/HB90/750 AL 900 EM/N16A/HB90/900 AL 20A EM/N20A/HB90/150 AL 300 EM/N20A/HB90/300 AL 450 EM/N20A/HB90/450 AL 600 EM/N20A/HB90/600 AL 750 EM/N20A/HB90/750 AL 900 EM/N20A/HB90/900 AL Custom radii and widths are available on request 45 Horizontal Bend Cable Ladder: Inside Radius: Width: Part Number: 12A EM/N12A/HB45/150 AL 300 EM/N12A/HB45/300 AL 450 EM/N12A/HB45/450 AL 600 EM/N12A/HB45/600 AL 750 EM/N12A/HB45/750 AL 900 EM/N12A/HB45/900 AL 12B EM/N12B/HB45/150 AL 300 EM/N12B/HB45/300 AL 450 EM/N12B/HB45/450 AL 600 EM/N12B/HB45/600 AL 750 EM/N12B/HB45/750 AL 900 EM/N12B/HB45/900 AL 16A EM/N16A/HB45/150 AL 300 EM/N16A/HB45/300 AL 450 EM/N16A/HB45/450 AL 600 EM/N16A/HB45/600 AL 750 EM/N16A/HB45/750 AL 900 EM/N16A/HB45/900 AL 20A EM/N20A/HB45/150 AL 300 EM/N20A/HB45/300 AL 450 EM/N20A/HB45/450 AL 600 EM/N20A/HB45/600 AL 750 EM/N20A/HB45/750 AL 900 EM/N20A/HB45/900 AL Custom radii and widths are available on request REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 17
22 CABLE LADDER ACCESSORIES 90 Internal Vertical Riser Cable Ladder: Inside Radius: Width: Part Number: 12A EM/N12A/INT/RISER/150 AL 300 EM/N12A/INT/RISER/300 AL 450 EM/N12A/INT/RISER/450 AL 600 EM/N12A/INT/RISER/600 AL 750 EM/N12A/INT/RISER/750 AL 900 EM/N12A/INT/RISER/900 AL 12B EM/N12B/INT/RISER/150 AL 300 EM/N12B/INT/RISER/300 AL 450 EM/N12B/INT/RISER/450 AL 600 EM/N12B/INT/RISER/600 AL 750 EM/N12B/INT/RISER/750 AL 900 EM/N12B/INT/RISER/900 AL 16A EM/N16A/INT/RISER/150 AL 300 EM/N16A/INT/RISER/300 AL 450 EM/N16A/INT/RISER/450 AL 600 EM/N16A/INT/RISER/600 AL 750 EM/N16A/INT/RISER/750 AL 900 EM/N16A/INT/RISER/900 AL 20A EM/N20A/INT/RISER/150 AL 300 EM/N20A/INT/RISER/300 AL 450 EM/N20A/INT/RISER/450 AL 600 EM/N20A/INT/RISER/600 AL 750 EM/N20A/INT/RISER/750 AL 900 EM/N20A/INT/RISER/900 AL Custom radii and widths are available on request 90 External Vertical Riser Cable Ladder: Inside Radius: Width: Part Number: 12A EM/N12A/EXT/RISER/150 AL 300 EM/N12A/EXT/RISER/300 AL 450 EM/N12A/EXT/RISER/450 AL 600 EM/N12A/EXT/RISER/600 AL 750 EM/N12A/EXT/RISER/750 AL 900 EM/N12A/EXT/RISER/900 AL 12B EM/N12B/EXT/RISER/150 AL 300 EM/N12B/EXT/RISER/300 AL 450 EM/N12B/EXT/RISER/450 AL 600 EM/N12B/EXT/RISER/600 AL 750 EM/N12B/EXT/RISER/750 AL 900 EM/N12B/EXT/RISER/900 AL 16A EM/N16A/EXT/RISER/150 AL 300 EM/N16A/EXT/RISER/300 AL 450 EM/N16A/EXT/RISER/450 AL 600 EM/N16A/EXT/RISER/600 AL 750 EM/N16A/EXT/RISER/750 AL 900 EM/N16A/EXT/RISER/900 AL 20A EM/N20A/EXT/RISER/150 AL 300 EM/N20A/EXT/RISER/300 AL 450 EM/N20A/EXT/RISER/450 AL 600 EM/N20A/EXT/RISER/600 AL 750 EM/N20A/EXT/RISER/750 AL 900 EM/N20A/EXT/RISER/900 AL Custom radii and widths are available on request 18 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY
23 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER ACCESSORIES Horizontal Equal Tee Section Cable Ladder: Inside Radius: Width: Part Number: 12A EM/N12A/EQTEE/150 AL 300 EM/N12A/EQTEE/300 AL 450 EM/N12A/EQTEE/450 AL 600 EM/N12A/EQTEE/600 AL 750 EM/N12A/EQTEE/750 AL 900 EM/N12A/EQTEE/900 AL 12B EM/N12B/EQTEE/150 AL 300 EM/N12B/EQTEE/300 AL 450 EM/N12B/EQTEE/450 AL 600 EM/N12B/EQTEE/600 AL 750 EM/N12B/EQTEE/750 AL 900 EM/N12B/EQTEE/900 AL 16A EM/N16A/EQTEE/150 AL 300 EM/N16A/EQTEE/300 AL 450 EM/N16A/EQTEE/450 AL 600 EM/N16A/EQTEE/600 AL 750 EM/N16A/EQTEE/750 AL 900 EM/N16A/EQTEE/900 AL 20A EM/N20A/EQTEE/150 AL 300 EM/N20A/EQTEE/300 AL 450 EM/N20A/EQTEE/450 AL 600 EM/N20A/EQTEE/600 AL 750 EM/N20A/EQTEE/750 AL 900 EM/N20A/EQTEE/900 AL Custom radii and widths are available on request 4 Way Cross Cable Ladder: Inside Radius: Width: Part Number: 12A EM/N12A/CROSS/150 AL 300 EM/N12A/CROSS/300 AL 450 EM/N12A/CROSS/450 AL 600 EM/N12A/CROSS/600 AL 750 EM/N12A/CROSS/750 AL 900 EM/N12A/CROSS/900 AL 12B EM/N12B/CROSS/150 AL 300 EM/N12B/CROSS/300 AL 450 EM/N12B/CROSS/450 AL 600 EM/N12B/CROSS/600 AL 750 EM/N12B/CROSS/750 AL 900 EM/N12B/CROSS/900 AL 16A EM/N16A/CROSS/150 AL 300 EM/N16A/CROSS/300 AL 450 EM/N16A/CROSS/450 AL 600 EM/N16A/CROSS/600 AL 750 EM/N16A/CROSS/750 AL 900 EM/N16A/CROSS/900 AL 20A EM/N20A/CROSS/150 AL 300 EM/N20A/CROSS/300 AL 450 EM/N20A/CROSS/450 AL 600 EM/N20A/CROSS/600 AL 750 EM/N20A/CROSS/750 AL 900 EM/N20A/CROSS/900 AL Custom radii and widths are available on request REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 19
24 CABLE LADDER REDUCERS NEMA 12A, 12B, 16A, 20A Concentric/Centred Reducer to suit all ladder Reducer types Concentric/Centred Reducer From To Bracket 1 Bracket Reducer Bracket Reducer Bracket Flanged Nut + Bolt Left/Right hand Reducer Left/Right hand Reducer From To Bracket 1 Bracket Splice plate Reducer Bracket Splice Plate Flanged Nut + Bolt 20 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
25 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE LADDER REDUCER JOINERS Splice Plate - 12A, 12B, 16A, 20A Application Example: To Suit Ladder Type: Part Number: 12A EM/N12A/SP AL 12B EM/N12B/SP AL 16A EM/N16A/SP AL 20A EM/N20A/SP AL Reducer Bracket - 12A, 12B, 16A, 20A Flanged Nut & Bolt EMT/TB Bolt Available in ZP or HDG EMT/TN Nut Available in ZP or HDG REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 21
26 CABLE LADDER ACCESSORIES Aluminium Lid Covers Standard Cover Standard Length: 3.0m Material: Aluminium Vented Cover Standard Length: 3.0m Material: Aluminium Peaked Cover Standard Length: 3.0m Material: Aluminium Custom covers to suit any application are available on request. 22 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY
27 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING CABLE TRUNKING CABLE TRUNKING REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 23
28 CABLE TRUNKING Trunking Schematic Joiner EM/STR/SJ (H) Trunking Body & Lid EM/STR (W)x(H) 4 Way Cross Section EM/STR/CROSS (W)x(H) Vertical Bend - Lid Inside EM/STR/INT/RISER (W)x(H) Horizontal T-Section - Lid on Top EM/STR/EQ/TEE (W)x(H) Horizontal T-Section - Lid on Inside EM/STR/INT/TEE (W)x(H) Horizontal T-Section - Lid on Outside EM/STR/EXT/TEE (W)x(H) Vertical Bend - Lid Outside EM/STR/EXT/RISER (W)x(H) 24 Horizontal Bend - Lid on Top EM/STR/HB (W)x(H) MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ Designed by: B Mumme 28/03/2017 Flange Adaptor EM/STR/FA (W)x(H) V25 End Cap EM/STR/EC (W)x(H) Cadfile: Cable GA.idw Twist Adaptor EM/STR/TA (W)x(H) Preliminary: For Approval Sheet size: A4 t Mechanical Support Systems 28/03/2017
29 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R EM/STR 75x75 PG EM/STR 100x50 PG EM/STR 100x75 PG CABLE TRUNKING EM/STR 100x100 PG EM/STR 150x100 PG Trunking Note: Body Special and profiles Lid can be made to order upon request. Straigth Trunking is supplied with the following components: 1 x Straight Trunking body 1 x Straight Trunking lid 6 x KBV Fast lock clips Optional extras EM/STR/SJ (H) Joiner EM/STR/EC (W)x(H) End Cap KBV KBV Fast Fast Lock lock Clips clips Designed by: B Mumme 28/03/2017 Width Trunking Body & Lid 11 Drain hole Preliminary: For Approval V13 Cadfile: STR.idw 3000 Sheet size: A Mechanical Support Systems Edition EM/STR C Sheet 1 / 1 Prepared by: Brimum Mechanical Draughting ph Copyright Mechanical Support Systems 28/03/2017 Height Width: Width Height: Length Length: Part Number: (m) Part Number EM/STR EM/STR 50x5050X50 PG PG EM/STR EM/STR 75x7575X75 PG PG EM/STR EM/STR 100x50100X50 PG PG EM/STR EM/STR 100x75 100X75 PG PG EM/STR 100x100 PG EM/STR 100X100 PG EM/STR 150x100 PG EM/STR 150X100 PG Straight Trunking is supplied with the following components: 1 x Straight Trunking body 1 x Straight Trunking Lid 6 x KBV Fast Lock Clips Optional extras: EM/STR/SJ (H) Joiner EM/STR/EC (W)x(H) End Cap NOTE: Note: Special Special profiles profiles can can be be made made to to order order upon upon request. Straigth Trunking is supplied with the following components: 1 x Straight Trunking body 1 x Straight Trunking lid 6 x KBV Fast lock clips REGISTERED COMPANY Optional extras EM/STR/SJ (H) Joiner Mechanical Support Systems reserves the right to change designs and specifications without notice. EM/STR/EC (W)x(H) End Cap 25 KBV
30 CABLE TRUNKING Gutter Bolt Flanged Hex Nut GBM06 x 16ZP M6x16 Gutter Bolt HNFM06ZP M6 Flanged Hex Nut KBV Fast Locking Clip Standard Finish: Stainless Steel 316 Part Number: KBV Fast Lock Clips KBSI/KBV Joiner Height 90 Height: Part Number: 50 EM/STR/SJ 50 PG 75 EM/STR/SJ 75 PG 100 EM/STR/SJ 100 PG 150 EM/STR/SJ 150 PG Joiner is supplied with the following components: 2 x Joiner plate 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut 26 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
31 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING Horizontal Bend - Lid On Top Height Width KBV Fast Lock lock Clips clips Width Height Part Number EM/STR/HB 50x50 PG EM/STR/HB 75x75 PG EM/STR/HB100x50 PG EM/STR/HB 100x75 PG EM/STR/HB 100x100 PG EM/STR/HB 150x100 PG Fas GBM06 MGB0616ZP x Gutter Bolt screw HNFM06ZP HMFN06ZP Flanged Hex Nut Horizontal Bend is supplied with the following components: 1 x Horizontal Bend body 1 x Horizontal Bend lid 3 x KBV Fast lock clips 4 x MGB0616ZP M6 Gutter bolt 4 x HMFN06ZP M6 Flange nut Width: Height: Part Number: EM/STR/HB 50X50 PG EM/STR/HB 75X75 PG EM/STR/HB 100X50 PG EM/STR/HB 100X75 PG EM/STR/HB 100X100 PG EM/STR/HB 150X100 PG Horizontal Bend is supplied with the following components: 1 x Horizontal Bend Body 1 x Horizontal Bend Lid 3 x KBV Fast Lock Clips 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 27
32 CABLE TRUNKING Vertical Bend - Lid on Outside Width KBV Fast lock Lock clips Clips GBM06 x 16ZP MGB0616ZP Gutter Bolt Gutter screw HMFN06ZP HNFM06ZP Flanged Hex Nut Width: Height: Part Number: EM/STR/EXT/RISER 50X50 PG EM/STR/EXT/RISER 75X75 PG EM/STR/EXT/RISER 100X50 PG EM/STR/EXT/RISER 100X75 PG EM/STR/EXT/RISER 100X100 PG EM/STR/EXT/RISER 150X100 PG Vertical Bend is supplied with the following components: 1 x Vertical Bend Body 2 x Vertical Bend Lid 4 x KBV Fast Lock Clips 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut 28 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ l Support Systems 28/03/2017
33 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING Vertical Bend - Lid Inside Width Height KBV Fast lock Lock clips Clips HNFM06ZP Flanged HMFN06ZP Hex Nut Flanged Hex Nut MGB0616ZP GBM06 x 16ZP Gutter Gutter screw Bolt Width: Height: Part Number: EM/STR/INT/RISER 50X50 PG EM/STR/INT/RISER 75X75 PG EM/STR/INT/RISER 100X50 PG EM/STR/INT/RISER 100X75 PG EM/STR/INT/RISER 100X100 PG EM/STR/INT/RISER 150X100 PG Vertical Bend is supplied with the following components: 1 x Vertical Bend Body 1 x Vertical Bend Lid 4 x KBV Fast Lock Clips 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. Systems 28/03/
34 CABLE TRUNKING Horizontal T-Section - Lid On Top Height KBV KBV Fast Fast lock Lock clips Clips KBV Fast lock clips Width MGB0616ZP HNFM06ZP Gutter Flanged screw Hex Nut MGB0616ZP Gutter screw MGB0616ZP GBM06 x 16ZP Gutter Gutter screw Bolt MGB0616ZP Gutter screw Width: Height: Part Number: EM/STR/EQ/TEE 50X50 PG EM/STR/EQ/TEE 75X75 PG EM/STR/EQ/TEE 100X50 PG EM/STR/EQ/TEE 100X75 PG EM/STR/EQ/TEE 100X100 PG EM/STR/EQ/TEE 150X100 PG Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section Body 1 x Horizontal T-Section Lid 3 x KBV Fast Lock Clips 6 x GBM06 x 16ZP M6 Gutter Bolt 6 x HNFM06ZP M6 Flange Nut 30 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ tems 28/03/2017
35 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING Horizontal T-Section - Lid On Outside Width Height KBV KBV Fast lock Lock clips Clips KBV Fast lock clips HNFM06ZP HMFN06ZP Flanged Hex Nut Nut HMFN06ZP Flanged Hex Nut GBM06 MGB0616ZP x 16ZP Gutter Gutter screw Bolt MGB0616ZP Gutter screw Width: Height: Part Number: EM/STR/EXT/TEE 50X50 PG EM/STR/EXT/TEE 75X75 PG EM/STR/EXT/TEE 100X50 PG EM/STR/EXT/TEE 100X75 PG EM/STR/EXT/TEE 100X100 PG EM/STR/EXT/TEE 150X100 PG Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section Body 1 x Horizontal T-Section Lid 2 x KBV Fast Lock Clips 6 x GBM06 x 16ZP M6 Gutter Bolt 6 x HNFM06ZP M6 Flange Nut REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. tems 28/03/
36 CABLE TRUNKING Horizontal T-Section - Lid On Inside Height Width MGB0616ZP GBM06 x 16ZP Gutter Gutter screw Bolt HNFM06ZP HMFN06ZP Flanged Hex Nut Flanged Hex Nut KBV KBV Fast Fast Lock lock Clips clips Width: Height: Part Number: EM/STR/INT/TEE 50X50 PG EM/STR/INT/TEE 75X75 PG EM/STR/INT/TEE 100X50 PG EM/STR/INT/TEE 100X75 PG EM/STR/INT/TEE 100X100 PG EM/STR/INT/TEE 150X100 PG Horizontal T-Section is supplied with the following components: 1 x Horizontal T-Section Body 2 x Horizontal T-Section Lid 4 x KBV Fast Lock Clips 6 x GBM06 x 16ZP M6 Gutter Bolt 6 x HNFM06ZP M6 Flange Nut 32 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ al Support Systems 28/03/2017
37 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING 4-Way Cross Section Height Width KBV KBV Fast lock Lock clips Clips MGB0616ZP GBM06 x 16ZP HNFM06ZP HMFN06ZP Gutter screw Bolt Flanged Hex Nut Width: Height: Part Number: EM/STR/CROSS 50X50 PG EM/STR/CROSS 75X75 PG EM/STR/CROSS 100X50 PG EM/STR/CROSS 100X75 PG EM/STR/CROSS 100X100 PG EM/STR/CROSS 150X100 PG 4 Way Cross Section is supplied with the following components: 1 x 4 Way Cross Section Body 1 x 4 Way Cross Section Lid Adaptor Lid 4 x KBV Fast Lock Clips 8 x GBM06 x 16ZP M6 Gutter Bolt 8 x HNFM06ZP M6 Flange Nut REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. l Support Systems 28/03/
38 CABLE TRUNKING Flange Adaptor Height Remove section of trunking sidewall, drill Ø8mm hole for M6 fixings KBV KBV Fast Fast lock Lock clips Clips Width HNFM06ZP HMFN06ZP Flanged Hex Hex Nut Nut GBM06 MGB0616ZP x 16ZP Gutter Gutter screw Bolt Width: Height: Part Number: EM/STR/FA 50X50 PG EM/STR/FA 75X75 PG EM/STR/FA 100X50 PG EM/STR/FA 100X75 PG EM/STR/FA 100X100 PG EM/STR/FA 150X100 PG Flange Adaptor is supplied with the following components: 1 x Flange Adaptor Body 1 x Flange Adaptor Lid 2 x KBV Fast Lock Clips 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut 34 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
39 BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R CABLE TRUNKING Twist Adaptor Width Height Height Width KBV Fast lock Lock clips Clips s: MGB0616ZP GBM06 x 16ZP Gutter Gutter screw Bolt HMFN06ZP HNFM06ZP Flanged Hex Nut Width: Height: Part Number: EM/STR/TA 50X50 PG EM/STR/TA 75X75 PG EM/STR/TA 100X50 PG EM/STR/TA 100X75 PG EM/STR/TA 100X100 PG EM/STR/TA 150X100 PG Twist Adaptor is supplied with the following components: 1 x Twist Adaptor Body 1 x Twist Adaptor Lid 2 x KBV Fast Lock Clips 4 x GBM06 x 16ZP M6 Gutter Bolt 4 x HNFM06ZP M6 Flange Nut REGISTERED COMPANY Mechanical Support Systems reserves the right to change designs and specifications without notice. 35
40 CABLE TRUNKING End Cap Height Width GBM06 MGB0616ZP x 16ZP Gutter Gutter screw Bolt HNFM06ZP HMFN06ZP Flanged Hex Nut Flanged Hex Nut Width: Height: Part Number: EM/STR/EC 50X50 PG EM/STR/EC 75X75 PG EM/STR/EC 100X50 PG EM/STR/EC 100X75 PG EM/STR/EC 100X100 PG EM/STR/EC 150X100 PG End Cap is supplied with the following components: 1 x End Cap 2 x GBM06 x 16ZP M6 Gutter Bolt 2 x HNFM06ZP M6 Flange Nut 36 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
41 MECHANICAL NEW ZEALAND SUPPORT INTERNATIONAL SYSTEMS CONVENTION CABLE TRAY CENTRE 2017 Mechanical Support Systems reserves the right to change designs and specifications without notice. 37
42 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY SALESINFO@MECHANICALSUPPORT.CO.NZ
43 Product Catalogue Range Download a catalogue Get in touch with us 0508 CABLE TRAY or (09) R BS OHSAS 18001:2007 & AS/NZS 4801:2001 REGISTERED COMPANY Certificate No. NZP1023HS Mechanical Support Systems reserves the right to change designs and specifications without notice. 39
44 MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY ( ) All products manufactured in accordance with ISO9001 Standard 40 Mechanical Support Systems reserves the right to change designs and specifications without notice.
PRODUCT CATALOGUE MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY
BS OHSAS 18001:2007 & AS/NZS 4801:2001 Certificate No. NZP1023HS R PRODUCT CATALOGUE REGISTERED COMPANY MECHANICALSUPPORT.CO.NZ 0508 CABLE TRAY Who we are Founded in 2005 by Directors Hayden Froggatt and
CERTIFIED QUALITY SYSTEM ISO 9001:2015 REGISTERED COMPANY
BS OHSS 18001:2007 & S/NZS 4801:2001 Certificate No. NZP1023HS R PRODUCT CTLOGUE Pipe Supports REGISTERED COMPNY MECHNICLSUPPORT.CO.NZ 0508 CBLE TRY Who we are Founded in 2005 by Directors Hayden Froggatt
Cable Tray and Accessories
Vergokan Cable Tray Cable Tray and Accessories 1 salesinfo@mechanicalsupport.co.nz PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz Vergokan Cable Tray 2 Vergokan Cable Tray KBSI 35 Series
Cable Tray and Accessories
Vergokan Cable Tray Cable Tray and Accessories 1 salesinfo@mechanicalsupport.co.nz PO Box 204336 Highbrook Auckland www.mechanicalsupport.co.nz Vergokan Cable Tray 2 Vergokan Cable Tray KBSI 35 Series
ABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 8 71 335 SECTION 4 Cable Ladder and A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO91 Lic No 13146 EDITION 2 SECTION 4: Cable Ladder & Type 3/5 Type 4/7L Type
Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/30 Cable Ladder Type 3/50 K-1000 Channel KT3/KT5 Ladder Tray
www.hesales.com.au Cable Support Systems Admiralty Pattern Tray Cable Ladder Type 2/3 Cable Ladder Type 3/5 K- Channel KT3/KT5 Ladder Tray -.55mm base Galvabond - 2.4m length. 14mm side - Self-splicing
SECTION 2: Cable Tray
SECTION 2: Cable Tray Admiralty Pattern Tray Continuous Punch Cable Tray Light Duty Tray > 2:3 > 2:5 > 2:7 CT Heavy Duty Cable Tray Ladder Tray Ladder Tray Accessories > 2:10 > 2:13 > 2:15 Ladder Tray
ABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 008 701 335 SECTION 5 Structural Cable Ladder Systems A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO9001 Lic No 13146 EDITION 2 SECTION 5: Structural Cable Ladder
STRAIGHT PERFORATED TRAY
STRAIGHT PERFORATED TRAY RETURNED EDGE TYPE RETURNED FLANGE TYPE NOTE: Other sizes are available upon request WIDTH (W) HEIGHT (H) 50 15 15 150 15 15 15 400 15 500 15 600 15 STRAIGHT CABLE TRAY STANDARD
Electrical Cable. Support Systems. Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 008 701 335 Electrical Cable Support Systems A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO9001 Lic No 13146 EDITION 2 ABN 43 008 701 335 ACN 008 701 335 Page
Cable ladder systems. Development and testing
Cable ladder systems Metsec cable ladder systems have been developed to provide cost effective solutions for the support of cables in a wide range of market sectors. These sectors include: * Coercial *
Swifts XRF extra heavy duty return flange straight lengths
Swifts F extra heavy duty return flange straight lengths and weights Loading graphs Load tests carried out to BS EN 61537 The loads shown on all graphs are the safe recommended maximum loads that can be
CATALOGUE ELECTRICAL
CATALOGUE B R AT IN SIN C E 1 9 2 4 G 90 YEARS ST LE RU CE T ELECTRICAL O F SINCE 1924 NEMA CABLE LADDER - GENERAL INFORMATION Unistrut also manufactures and markets the largest range of cable ladder systems
Series 2, 3, 4, & 5 Aluminum - Straight Sections
- Straight Sections I-1 B-Line series Cable Tray Systems - Accessories For Aluminum Fittings see fittings section pages L-1 thru L-17 How The Service Advisor Works We know that your time is important!
Series 1 Steel - Straight Sections
Series 1 Steel - Straight Sections Series 1 Steel H-1 B-Line series Cable Tray Systems Series 1 Steel - ccessories & Fittings Series 1 Steel How The Service dvisor Works We know that your time is important!
Cable Support Systems FIRST CHOICE FOR TRAY LADDER STRUT HYGROUND CABLE MESH
Cable Support Systems FIRST CHOICE FOR TRAY LADDER STRUT HYGROUND CABLE MESH Queensland Brisbane Branch Townsville Branch 161 Jackson Road 75-81 Toll Street Sunnybank Hills Mount St John Queensland, 4109
ROOFING SOLUTIONS DESIGN GUIDE PURLINS AND GIRTS DESIGN GUIDE PURLINS AND GIRTS S&T029N
DESIGN GUIDE PURLINS AND GIRTS ROOFING SOLUTIONS DESIGN GUIDE PURLINS AND GIRTS S&T029N JUL 2015 CONTENTS INTRODUCTION 2 Acknowledgements 2 Disclaimer 2 Product Technical Statement 3 Producer Statement
PRODUCT CATALOGUE - CABLE TRAYS
PRODUCT CATALOGUE - CABLE TRAYS 098711969 shivshaktiindustries.delhi@gmail.com S. S. Engineering, B-2621, DSIDC Complex, Narela Industrial Area, New Narela, Delhi-140 Table of Contents Perforated Cable
Series 2, 3, 4 Steel Cable Ladder Steel Cable Ladder, Series 2, 3, 4 & 5
Cable Ladder with Slotted Rung (shown with alternating slot orientation) Cable Ladder with Slotted Rung (shown with continuous slot down - also available with continuous slot up) HDS-1 Steel Cable Ladder,
CABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CABLE MANAGEMENT SOLUTIONS CATALOGUE03/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS www.legrand.co.uk CHANNEL SUPPORT THE BACKBONE OF ALL YOUR SUPPORT NEEDS Swifts
Series 3 & 4 Stainless Steel - Accessories
- Accessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. (Expansion splice quantity subtracted) Boxed in pairs with hardware.
Pipe Support Systems & Components. EDITION 3.
Pipe Support Systems & Components 10 899 4 sales@anchoragegroup.com.au www.anchoragegroup.com.au ABOUT ANCHORAGE GROUP ABOUT ANCHORAGE Leading manufacturing company Swift Metal Services designs, manufactures
Performa Mesh Trays. Flexible solution for the routing of cables
Flexible solution for the routing of cables Solutions for each application Performa is one of the most flexible solutions on the market for the routing of cables in light duty and medium duty installations.
Table of Contents. Type: UL/TG/ST 4. Type: UL/TU/ST 13. Type: UL/TT/ST or UL/TC/ST 22. Type: UL/TR/ST 34. Type: UL/LZ/ST 53.
Table of Contents Table of Contents ULI TM Steel Surface Cable Trunking Type: UL/TG/ST 4 ULI TM Steel Perforated Cable Tray Type: UL/TU/ST 13 Type: UL/TT/ST or UL/TC/ST 22 Type: UL/TR/ST 34 ULI TM Steel
Cable Ladder System for Ships
Cable Ladder System for Ships Our product range specially designed for installation in ships is available in two distinctive types: RZE-R is a cable ladder with a smart design which reduces the need for
Series 1 Steel - Straight Sections
LST-1 able Systems - Straight Sections How The Service dvisor Works -Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that
Catalog & Cable Ladder System. Guide. cable management system
Catalog & Cable Ladder System Guide L4 Cable Ladder - mm Sidewall L5 Cable Ladder - mm Sidewall L6 Cable Ladder - mm Sidewall L4L/ L4L/ L4L/ L4L/ L4L/ L4L/ L5L/ L5L/ L5L/ L5L/ L5L/ L5L/ L6L/ L6L/ L6L/
ADDER SYSTEM CABLE L
17 Introduction CALE LADDE The ICMS cable ladder system consists of a wide range of aluminum and Steel cable ladders, Fittings and accessories. Ladder Trays are available in two models: Tubular rungs mechanically
EZTray. Cable Management Made Easy
EZTray Cable Management Made Easy PRESENTATION Introduction:.................................. 3 EZ Tray: The Tray That Saves You Time!.............. 4-5 EZ Tray: The Innovative Cable Management Solution....
Series 2, 3, 4, & 5 Steel - Accessories
- ccessories Splice Plates Standard 8-hole pattern for all steel splice plates. One pair including hardware provided with straight section. Boxed in pairs Expansion Splice Plates Expansion plates allow
Series 2, 3, 4, & 5 Aluminum - Accessories
The following is a list of accessories and fittings that can be provided with S8 tray. For more information on these items, contact our Engineering Department. Fittings Horizontal Bends 30 Bends with 24,
Swifts SW strength, speed and flexibility
Swifts SW strength, speed and flexibility STEEL WIRE CABLE TRAY / PRODUCT GUIDE Global vision... 21st Century solutions Established in the UK since 1972, Legrand is a world leading manufacturer of products
Swifts SW. strength, speed and flexibility STEEL WIRE CABLE TRAY / PRODUCT GUIDE
Swifts S strength, speed and flexibility STEEL IRE CABLE TRAY / PRODUCT GUIDE Global vision... 2st Century solutions Established in the UK since 972, Legrand is a world leading manufacturer of products
1082 Kingsford Smith Drive PO Box 1376 Eagle Farm BC Queensland 4009 AUSTRALIA
MARINE S 1082 Kingsford Smith Drive PO Box 1376 Eagle Farm BC Queensland 4009 AUSTRALIA PHONE: +61 7 3877 2833 FAX: +61 7 3877 2890 EMAIL: extrusion@gjames.com.au WEBSITE: www.gjames.com.au 5th Edition
CONFIGURATION OF CABLE SUPPORT SYSTEMs
CONFIGURATION OF CABLE s CABLE TRUNKING Page 4 - page 7 CABLE TRAY Page 8 - page 11 CABLE LADDER Page 12 - page 14 3 SS249/ IEC 61084 COMPLIED STEEL SURFACE CABLE TRUNKING CEE PRODUCT CODE SS-CEE 6 3 (#)
Tecstrut Channel Suspension & Framing System
lindab I the ventilation products specialist Tecstrut Channel Suspension & Framing System Complies with HVCA specification DW144. Manufactured from corrosion resistant materials. Channels produced in accordance
Series 1 Steel - Straight Sections
- Straight Sections H-1 -Line series able Systems - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding system in this catalog is designed
Cable & Pipe Supports
LOOK FOR OUR AS3013:2005 FIRE RATED LOGO. It s a sure sign your cable management solution is designed in Australia, rigorously and independently tested to meet Australian standards, and selected from Australia
Cord Operated Curtain Track Systems
Cord Operated Curtain Track Systems Application Chart Specification Weight Range Applications Single Stack Pair Stack Multiple Stack Asymetric Profile Profile Number Dimensions in mm Gliding Channel (mm)
WIRE BASKET TRAY CANADIAN ELECTRICAL RACEWAYS INC.
CANADIAN ELECTRICAL RACEWAYS INC. WIRE BASKET TRAY Made of heavy-gauge zinc plated wire mesh, CER basket tray is ideal for your commercial or industrial cable management project. A full range of cable
GRP Cable Trays. Tel: +44 (0) Fax:+44 (0)
Tel: +44 (0)1695 680010 Fax:+44 (0)1695 680009 GRP Cable Trays Captrad Cable Trays have been design and manufactured with the user in mind, whilst offering excellent performance ease of use. Our Cable
# INDEX. Created on: Revised on: N/A Cable Trays Manual 1 ABBREVIATIONS 2 SYSTEM COMPONENTS 3 DEFNITIONS 4 MATERIAL & FINISH OPTIONS
# INDEX 1 ABBREVIATIONS 2 SYSTEM COMPONENTS 3 DEFNITIONS 4 MATERIAL & FINISH OPTIONS 5 GENERAL INFORMATION 6 ADAPTATION TO NEMA STANDARDS 7 CABLE TRAYS 8 CABLE LADDERS 9 ACCESSORIES 10 SUPPORTS 11 INSTALLATION
Estimated Cable Fill Width in (mm) in 2 mm 2.30 OD. Cable Fill Area
ONTRAC WIRE MESH CABLE TRAY SYSTEM OnTrac Wire Mesh Cable Tray System CPI s OnTrac Wire Mesh Cable Tray System is an excellent solution for indoor cable pathway applications to create point-to-point pathways
THE NEW TS IT RACK 8
THE NEW TS IT RACK 8 Fast and reliable Fast Loosen the 48. (9 ) quickrelease fastener, slide into the correct position, and latch Reliable Maximum load capacity up to,000 N Convenience in perfection Interior
Silent Gliss. Electric Curtain Track Systems
Electric Curtain Track Systems 2 Electric Curtain Track System Autoglide Product Information Motorised curtain track system purpose designed for light to medium weight curtains for domestic use only System
Series 2, 3, 4, & 5 Aluminum - Accessories
Wedge Lock Splice Plates Standard 4-hole pattern. Furnished in pairs, with hardware. One pair including hardware provided with each section. Boxed in pairs with hardware. For field installation drill 13
NEMA CABLE LADDER [GENERAL INFORMATION]
![NEMA CABLE LADDER [GENERAL INFORMATION]](/thumbs/93/112454241.jpg "NEMA CABLE LADDER [GENERAL INFORMATION]")
NEMA CABLE LADDER [GENERAL INFORMATION] Cable Support Systems NEMA Cable Ladder Cable Tray Acrofil ire Basket Brackets & Supports Unistrut manufactures and markets the largest range of cable ladder systems
Cable Tray CT2D-18. Tray2Day SM. cable tray service program
Cable Tray CT2D-18 Tray2Day SM cable tray service program * * At, we believe that power is a fundamental part of just about everything people do. That s why we re dedicated to helping our customers s find
Custom Boat Trailer Specialists 17/18
Custom Boat Trailer Specialists 17/18 CONTENTS About Mackay 3 MLKR Series 4 MLJ Series 5 AL Series 6 KR Off Road Series 7 PU Series 8 KR Series 9 Custom Trailers 10 Custom & Specialty Trailers _11 Special
APPENDIX D. D.1 Macalloy Bars. Approximate safe working loads (kn) Appendix D - Proprietary Components (1/9) Stainless steel architectural ties
Appendix D - Proprietary Components (1/9) APPENDIX D D.1 Macalloy Bars Bar dia. mm Stressing ties Stainless steel stressing ties Stainless steel architectural ties High strength Tie rods grades precision
REDI-RAIL - Accessories
Standard Splice Plates One pair including hardware provided with each straight section. Offset Reducing Splice Plates FLEX-MOUNT djustable Splice Plates 1 /4" hardware. Horizontally adjustable to 90. Vertically
REDI-RAIL - Accessories
- ccessories Standard Splice Plate One pair including hardware provided with each straight section. (Expansion splice quantity subtracted) R4-SSP R5-SSP R6-SSP R7-SSP Expansion Splice Plate Bonding jumpers
BILMAT ENGINEERING (An ISO 9001:2008 certified company)
BILMAT ENGINEERING (An ISO 9001:2008 certified company) ADDRESS 352,353 G.I.D.C, INDUSTRIAL ESTATE, POR, RAMANGAMDI, VADODARA -391 243, GUJARAT. PROPRIETOR DIPAK L PATEL PHONE NO 0265 6540425 E-MAIL dipak@bilmatengg.com
Section K. Cabtray - Cable Management System
Section K Cabtray - Cable Management System Introducing Cabtray Cabtray Standard Range Cabtray Load Carrying Capacity mm High Tray Joiner Kit K5 50 mm High Tray Joiner Kit K6 Tray Joiner Kit Trapeze Support
CABLE MANAGEMENT SOLUTIONS CATALOGUE2003/04 A COMPLETE CABLE MANAGEMENT SOLUTION FOR COMMERCIAL AND INDUSTRIAL APPLICATIONS.
CLE MNGEMENT SOLUTIONS CTLOGUE2003/04 COMPLETE CLE MNGEMENT SOLUTION FOR COMMERCIL ND INDUSTRIL PPLICTIONS www.legrand.co.uk FSTRCK F31 FSTRCK F31 SYSTEM STEEL WIRE CLE TRY Legrand With a large range of
C12.11 SALTO 4208 C12 SIDE HUNG WINDOWS
C12 SIDE HUNG WINDOWS C12.11 01.07.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General characteristics...
C O L M A N. Air Distribution LINEAR SLOT DIFFUSERS CE SERIES SERIES
C O L M A N Air Distribution E N G I N E E R E D A I R P R O D U C T S LINEAR SLOT DIFFUSERS CE SERIES CE SERIES LINEAR SLOT DIFFUSERS CE SERIES QUALITY AND EFFICIENCY WITHOUT COMPROMISE Application Colman
Steel Ladder Cable Trays & Accessories
Steel Ladder Cable Trays & Accessories CONTACT GIGA Enterprises Mr. Kostas Samaras Thermaikou 54, Nea Efkarpia 56429 Thessaloniki, Greece Email: info@gigaenterprises.com Phone: +30 698 695 9164 Website:
Product Data For FARNELL
ae Product Data For FARNELL ae Uniset is / Varioset is ae EL ELECTRONIC KOMBI SYSTEM WALL MOUNTING Pole clamp For reliable, convenient fastening to round or square poles. For pole diameter/size:
Standard Product. Cable Pathway QUICK TRAY PRO
Spec-00682 Cable Pathway QUICK TRAY PRO QUICK TRAY PRO Straight Section INDUSTRY STANDARDS UL Classified for suitability as equipment ground conductor only. NFPA 70, National Electrical Code, Article 392:
stainless steel Cover hinge The cover hinge is simply screwed to the box protection channel and to the edge fold. Model No. KL
aus HB, S. 46 The Rittal range of terminal boxes offers 44 practical designs, developed and improved in constant dialogue with users. Whether with or without gland plates, in stainless steel, EMC version
Channel Cable Tray - Accessories & Fittings
hannel able Tray - Straight Sections E-1 -Line series able Tray Systems hannel able Tray - ccessories & Fittings How The Service dvisor Works We know that your time is important! That s why the color-coding
HELM Hardware for Sliding Gates. Sliding hardware
HELM Hardware for Sliding Gates Sliding hardware HELM Hardware for Sliding Gates Contents General Information General Information Page 3 Hardware for Sliding Gates General Information, HELM 00 - HELM 700
Product Range Handbook
Product Range Handbook 1 Where to find us Building 144 Culham Number 1 Site Station Road CULHAM Oxon OX14 3DA Sales: +44 (0)1865 409300 Fax: +44 (0)1865 407991 2 INDEX PAGE ROUND BARS 4 SQUARE BAR 5 TEES
Initiate WARNING. Illustration 1. Panel Connection Guidelines:
Failure to install product as instructed, use of hardware other than that which is provided with the product, or failure to comply with all instructions can result in product failure and/or personal injury
WOC-364 Installation Instructions Ranger XP Heater System
WOC-364 Installation Instructions Ranger 2011-12 XP Heater System Order of installation for a Complete Enclosure Always install the Heater System first if possible NOTE: If installing the Heater System
B.1.CHRONO SIDE HUNG OPEN IN WINDOWS
B.1. SIDE HUNG OPEN IN Contents General characteristics................... page B.1.2 Base set n 20110...................... B.1.4 Centre locking sets n 30140-800 and 20140-35..........................
I N D U S T R I E S, I N C. MARINE I-BEAMS LADDER SYSTEMS
CHANNEL-TRACK & TUBE-WAY MARINE I-BEAMS LADDER SYSTEMS I-Beam Siderail Ladder Cable Tray End View 1.5".595" 4.188".344" 1.039" 1.5" 4 Siderail Example Rung Detail.85" Features: 1. Siderail is roll formed
1SLC004001B0202. Enclosures and cable systems overview
1SLC004001B0202 Enclosures and cable systems overview Insulating enclosures and installation material IP40 flushmounting Estetica series IP40 flushmounting Europa series IP40 wallmounting Unibox series
HDPE PIPE SYSTEMS PRODUCT CATALOGUE.
HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington
MOTIV-8 FLEXIBLE CABLE SYSTEMS
MOTIV-8 FLEXIBLE CABLE SYSTEMS www.conductix.com.au CONDUCTIX FLEXIBLE CABLE SYSTEMS Designed and manufactured in Australia. Proven in applications throughout the world for over 25 years. Full range of
australia ALUMINIUM HEAVY DUTY UTE TRAYS & CANOPIES
australia ALUMINIUM HEAVY DUTY UTE TRAYS & CANOPIES BUILt tough For the harshest AUssIe conditions Introduction and philosophy Tray and Canopy Tray Bases Norweld have been designing and building aluminium
Modular Enclosure System
Modular Enclosure System Flexible design, maximum versatility ENCLOSURES AND CLIMATE CONTROL NHP Electrical Engineering Products NZ nhp-nz.com 0800 NHP NHP MODULAR enclosure system The MODULAR enclosure
WB24- W -120 CHOOSE TRAY LENGTH WIDTH CHOOSE TRAY LENGTH VENTILATED 10 FT 12 FT 20 FT 24 FT 4, 8, 12, 14, 18, 20 & N/A N/A N/A
WB24- W -120 NEMA TRAY TYPE MATERIAL/FINISH VENTILATED WIRE BASKET TRAY STEEL / MILL GALVANIZED CAT# PREFIX CHOOSE TRAY LENGTH WIDTH CHOOSE TRAY LENGTH VENTILATED 10 FT 12 FT 20 FT 24 FT WB24 4, 8, 12,
TABLE OF CONTENTS SERIES 40
TABLE OF CONTENTS SERIES ALUMINIUM PROFILES SERIES PAGE Technical data and profile cross-sections 2.4-2.17 Processing of profiles for connectors 2.1-2.19 Prices of aluminium profile processing 2. Aluminium
1mm GALVANIZED PIPE SYSTEM
1mm GALVANIZED PIPE SYSTEM Product group 1 A modular pipe system Download catalogue 1mm GALVANIZED PIPE SYSTEM Product group 1 v.en.04/2013 Content Assembly methods... 1-8 Pipes... 9-12 Bends... 13-14
ALUMINIUM PROFILE SYSTEM SERIES 40
ALUMINIUM PROFILE SYSTEM SERIES With the basic grid mm (slot 5); mm (slot 6), 16mm, mm and 0mm (slot ). In addition to this, the complete connection technology and a large range of accessories. TABLE OF
Electrical and Mechanical Supports Systems
Electrical and Mechanical Supports Systems Index - Mechanical & Electrical Support Systems This catalogue contains Mechanical & Electrical Support Systems information only as indicated below. For any additional
ABN Quality Endorsed Company ISO9001 Lic No EDITION 2
ABN 43 008 701 335 SECTION 6 Cable Ladder Covers A U S T R A L I A W I D E A U S T R A L I A N M A D E Quality Endorsed Company ISO9001 Lic No 13146 EDITION 2 SECTION 6: Cable Ladder Covers Flat Cover
CABLE LADDERS CATALOGUE
CABLE LADDERS CATALOGUE CONTENT INTRODUCTION 5 TECHNICAL INFORMATION 13 CABLE LADDER TRAY OVERVIEW 47 ALUMINUM LADDERS 57 STEEL LADDERS 65 LADDER FITTINGS 83 LADDER TYPE ACCESSORIES 89 FIXING ACCESSORIES
General Introduction
General Introduction Al-asoudia Electrical Industries Co. has been established to serve the industry of cable management systems including cable trays, cable ladders, cable glands, cable lugs, earthing,
Pressure Pipes & Fittings
Pressure Pipes & Fittings Description: UPVC and CPVC pipes for hot and cold water supply under pressure. Range: Metric series fromø16 up toø315 mm, Imperial series fromø1/2" up toø1". Pressure Rating:
NorSap Pleasure Boat Equipment 2016
NorSap Pleasure Boat Equipment 2016 All our products for the pleasure boat market have been extensively tested NorSap Pleasure Boat NorSap is the leading manufacturer of helm chairs and marine equipment
ELLIS PATENTS ELECTRICAL PRODUCTS
ELLIS PATENTS ELECTRICAL PRODUCTS UK PRICE LIST 2008 Issue 2 PAGE NO PRODUCT CATALOGUE PAGE NO 2 ALPHA ALUMINIUM TREFOIL CLEAT Product Update 2008 3 TCA ALUMINIUM CAST TREFOIL CLEAT 5 & 6 4 EMPEROR TREFOIL
Custom Metal Fabrication - HVAC Air Duct and Fittings
Custom Sheet Metal Metal Forming Accessories Hardware Supplies Custom Metal Fabrication - HVAC Air Duct and Fittings 4120 Ridgeway Drive - Unit 28 Mississauga - Ontario - L5L 5S9 Tel 905-624-3854 / 905-290-2334
Custom Metal Fabrication - HVAC Air Duct and Fittings
Custom Sheet Metal Metal Forming Accessories Hardware Supplies Custom Metal Fabrication - HVAC Air Duct and Fittings 4120 Ridgeway Drive - Unit 28 Mississauga - Ontario - L5L 5S9 Tel 905-624-3854 / 905-290-2334
50 years experience in offering tailor made solutions to suit every customer s need.
Digital Brochure 50 years experience in offering tailor made solutions to suit every customer s need. Mages Group was established in 1960 by Mr William Mages and has since grown to become one of the South
SECTION METAL LOCKERS. A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
SECTION 10 51 13 METAL LOCKERS PART 1 GENERAL 1.01 SECTION INCLUDES A. Heavy Duty Welded Gear Lockers. B. Locker benches. 1.02 REFERENCES A. ADAAG Americans with Disabilities Act, Accessibility Guidelines.
Specialised Truck Bodies & Engineering
Specialised Truck Bodies & Engineering 27 Doyle Ave PO Box 220 Unanderra NSW 2526 Tel: 02 42728400 Fax: 02 42728411 Email: sales@berryhowe.com.au Web: www.berryhowe.com.au About Us Berry Howe Industries
D.I.Y SUSPENDED GLASS BALUSTRADING POWDER COATED (Black / White / Bronze)
SUSPENDED GLASS BALUSTRADING POWDER COATED (Black / White / Bronze) A LANDING: WELDED BASE START / END (2 clamps) R 362.00 B LANDING: WELDED BASE INTERMEDIATE (4 clamps) R 524.00 C LANDING :NO BASE START
Cent-R-Rail Systems. WARNING: Do NOT use as a walkway, ladder or support for personnel. Cent-R-Rail. Cable Tray Systems
114 How The Service Advisor Works Cooper B-Line knows that your time is important! That s why the color-coding system in this catalog is designed to help you select products that fit your service needs.
THE WORLD S FASTEST DUCTING
NORDFAB DUCTING CATALOGUE Quick-Fit C l i p p e d D u c t i n g THE WORLD S FASTEST DUCTING & FLANGED DUCTWORK Nordfab QF Clipped and FL Flanged ducting QF clipped and FL flanged ducting offers a complete
INDUSTRIAL PIPE SUPPORTS CATALOGUE
INDUSTRIAL PIPE SUPPORTS CATALOGUE DATE PUBLISHED: 1/06/2017 BINDER GROUP INDUSTRIAL PIPE SUPPORT CATALOGUE TABLE OF CONTENTS 1. INTRODUCTION... 4 2. QUALITY MANAGEMENT CERTIFICATE... 5 3. PIPE SUPPORT
Head Office. South Australia. New South Wales. Queensland. Victoria. Western Australia.
Head Office South Australia 580 Prospect Road Kilburn South Australia 5084 Telephone: 08 8360 4550 Fax: 08 8360 4590 Email: sa.sales@ezystrut.com.au New South Wales Lot 34 Progress Circuit Prestons New
Expanded Metal Walkway
Expanded Metal Walkway Safe Flooring Solutions GRIDWALK WALKWAY WK45 Profile 45mm LWM 135mm WK30 Profile 30mm LWM 75mm WK Profile mm LWM mm WK25 Profile 25mm LWM 60mm 1 GRIDWALK WALKWAY GRIDWALK (WK) STEEL
Traction Tread Grating - Design Load Table of Contents & Advantages
- Design Load Table of Contents & Advantages Design Load Tables, aluminum, stainless steel Planks - 7" width... 54 Planks - 10" width... 55 Planks - 12" width... 56 Planks - 10" width, large hole... 57
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
CABLE LADDER TRAYS CATALOGUE
CABLE LADDER TRAYS CATALOGUE INDEX - About SFSP 2 - Cable Ladder Trays 10 - Cable Ladder Trays Run 44 - Ladder Tray Fittings 86 - Ladder Tray Accessories 90 - Cable Tray Support System 97 - Concrete Support
19 floor rack with steel door
2015 Telecommunication rack systems HETEL 1 19 floor rack with steel door Rack width 600 mm Rack width 800mm General features include a metal frame, 19 rails, roof, side and rear panels, door and plinth
argco.com
800-854-1015 argco.com STRUT SUPORT SYSTEM STRUT SUPPORT CHANNEL US Strut Support Channel Quick, strong attachment of single or multiple pipes horizontally or vertically Unlimited applications - range