The Pentruder Concrete Cutting System is designed and built for durable performance

Transcription

1 ICSDIAMONDTOOLS.COM

2 O ur commitment is to help professionals get their job done right. We have been the leader in chain based concrete and pipe cutting solutions for over 25 years. Our concrete cutting diamond chains are designed and manufactured in Portland, Oregon using the best in global materials. Our patented SealPro and SealPro Advanced anti stretch technology significantly reduces chain stretch so your chain lasts longer and you spend less time tensioning. Our patented PowerGrit pipe cutting chain allows you to cut ductile iron, HDPE and PVC pipe in a confined space with no fear of rotational kickback. Our chain, combined with our best-in-class bars and powerheads give you a cutting system that can plunge cut up to 25 deep, cut tight radiuses and clean square corners with no overcutting. All our powerheads are designed for wet cutting and have integrated water delivery systems that reduce airborne particles during the cut. Your job demands power and precision. ICS provides cutting systems that allow you to get your job done quickly and safely compared to other cutting methods. Headquartered in Portland, Oregon, ICS also has a sales and distribution office in Belgium and a worldwide sales and service network covering more than 70 countries. ICS concrete power cutters, diamond chains, and related products are sold and supported by a network of ICS Authorized Dealers and backed by a comprehensive network of factory-trained personnel and service centers. SealPRO Technology T here are many jobs that only an ICS power cutter can do. And for those jobs, only ICS includes patented SealPRO and SealPRO Advanced anti-stretch technology, which locks out the abrasive slurry created when cutting concrete stone, or masonry, reducing chain stretch and increasing the useful life of the chain. Concrete cutting pros like you depend on your tools. All day, every day. Under the toughest conditions. The precision and versatility you ve come to expect from ICS in addition to the perfect blend of power and efficiency. Diamond segments laser-welded to a steel chassis grind through concrete, stone and masonry, eliminating kickback and the damage that percussive methods can cause. This remarkable property allows ICS power cutters to plunge cut up to 25 inches (63cm) into the hardest concrete or make perfectly square. corners with no overcuts. We know the challenges you face and understand the importance of investing in the right tools. 2 icsdiamondtools.com

3 The Pentruder Concrete Cutting System is designed and built for durable performance Innovative design For over 40 years, our strength has been to use advanced but reliable technical solutions. This, in combination with the sound engineering principles and modern simulation tools, creates products which are ahead in their field. Best materials The Pentruder wall saws, wire saw and drilling machines are built from superior materials chosen for function, performance and durability component by component. Aerospace aluminum billets and specialty alloy steels are the standard. High power and reliability The Pentruder high frequency concrete cutting machines are designed with high power and reliability as main targets. A foundational piece of any Pentruder Concrete Cutting System is the 400Hz High frequency technology. The 400Hz system ensures high reliability, exceptional bearing life, and minimal and infrequent maintenance. Durable performance Pentruder concrete cutting machines are known for their durable performance. A combination of advanced and experience-tempered designs, attention to detail, and function-specific materials ensure that your choice in Pentruder is an investment in long-term productivity. icsdiamondtools.com

4 Gas Power 695XL TECHNICAL SPECIFICATIONS 695XL - F4 - Gas Cutting an egress window Portland, OR Bar Cutting Depth Powerhead Weight Engine Speed Idling Speed Horsepower Engine Type Displacement Powerhead Dimensions Guaranteed Sound Power Level, Lwa (1) Sound Pressure Level, at Operator s Ear Lwa (1) Vibration, a hv, eq Concrete Cutting (2) Vibration, a hv, eq Pipe Cutting (2) Water Supply Requirement Water Flow Requirement Fuel Mix Ratio Fuel Capacity 12in/25cm, 16 in/40cm PowerGrit 12in/30cm, 14 in/35cm, 16 in/40cm TwinMAX 12 in/30 cm, 16 in/40 cm FORCE4 21 lbs/9.6 kg /- 150 rpm (max) /- 100 rpm 6.4 hp ( rpm 2-stroke, single cylinder, air cooled 5.7 cu inch (94 cc) 18 L x 14 H x 12 W (46 cm x 36 cm x 30 cm) 115 db(a); (Kwa = 1.0 db(a)) db(a): (K = 1.0 db(a)) 3.6 m/s 2 (K=0.2 m/s 2 ) Front Handle 3.1 m/s 2 (K=0.2 m/s 2 ) Rear Handle 5.62 m/s 2 (K=0.2 m/s 2 ) Front Handle 5.28 m/s 2 (K=0.2 m/s 2 ) Rear Handle Minimum of 20 psi (1.4 bar) Minimum: 2 gpm (8 lpm) 50:1 (2%) fuel-to-oil 0.26 gal (1.0 liter) (1) Measured in accordance with ANSI S /ISO3741:2010 (2) Measured in accordance with ISO5349-1:2001, ISO22867:2011 and ISO19432: icsdiamondtools.com

5 695XL For Cutting Concrete & Pipe Equipped with integrated water delivery system that continuously feeds water to the blade, the 695XL features also include: an easy-to-start engine with higher energy ignition system and durable, long-lasting components including a new muffler, carburetor and piston & cylinder. Available for the entire line of MAX, FORCE4 and PowerGrit series diamond chains. The 695XL is the highest horsepower ICS gas power cutter for frequent-use by general construction, utility contractors and concrete professionals. 695XL-GC 695XL-F4 695XL-PG 695XL-GC GAS POWER CUTTER AND CONSUMABLES* PART NUMBER DESCRIPTION ICS 695XL GC Powerhead ICS 695XL-12 GC Package, with 12 in/30 cm Guidebar & TwinMAX Chain ICS 695XL-14 GC Package, with 14 in/35 cmguidebar & TwinMAX Chain ICS 695XL-16 GC Package, with 16 in/40 cm Guidebar & TwinMAX Chain ICS TwinMAX-29 chain 12 in/30 cm ICS TwinMAX-32 chain 14 in/35 cm ICS TwinMAX-35 chain 16 in/40 cm ICS TwinMAX-29 Plus chain 12 in/30 cm ICS TwinMAX-32 Plus chain 14 in/35 cm ICS TwinMAX-35 Plus chain 16 in/40 cm ICS TwinMAX-29 Abrasive chain 12 in/30 cm ICS TwinMAX-32 Abrasive chain 14 in/35 cm ICS TwinMAX-35 Abrasive chain 16 in/40 cm ICS 695GC Guidebar 12 in/30 cm ICS 695GC Guidebar 14 in/35 cm ICS 695GC Guidebar 16 in/40 cm ICS 695GC Drive Sprocket ICS 695XL-GC Premium Tensioner Kit Tensioning Scrench 695XL-F4/PG GAS POWER CUTTER AND CONSUMABLES** PART NUMBER DESCRIPTION ICS 695XL F4 Powerhead ICS 695XL-12 F4 Package, with 12 in/30 cm FORCE4 Guidebar & FORCE4 Chain ICS 695XL-16 F4 Package with 16 in/40 cm FORCE4 Guidebar & FORCE4 Chain ICS 695XL-16 PG Package with 16 in/40 cm FORCE4 Guidebar & PowerGrit Chain ICS FORCE4-25 chain 12 in/30 cm ICS FORCE4-29 chain 16 in/40 cm ICS FORCE4-25 Premium L chain 12 in/30 cm ICS FORCE4-29 Premium L chain 16 in/40 cm ICS FORCE4-25 Premium S chain 12 in/30 cm ICS FORCE4-29 Premium S chain 16 in/40 cm ICS FORCE4-25 Abrasive chain 12 in/30 cm ICS FORCE4-29 Abrasive chain 16 in/40 cm ICS PowerGrit Chain 16 in/40 cm ICS FORCE4-25 Premium S wide kerf (.375) chain 12 in/30 cm ICS FORCE4-29 Premium S wide kerf (.375) chain 16 in/40 cm ICS 695F4 Guidebar 12 in/30 cm ICS 695F4 Guidebar 16 in/40 cm ICS 695F4 Drive Sprocket ICS 695XL - F4/PG Premium Tensioner Kit Tensioning Scrench See the entire list of our guidebar and chain compatibility on pages icsdiamondtools.com *Guidebars, chains and drive sprockets fit 633GC **Guidebars, chains and drive sprockets fit 633F4

6 Pneumatic Power 701-A TECHNICAL SPECIFICATIONS Powerhead Weight 29 lbs (13 kg) 701A - Pneumatic Egress window opening Portland, OR Bar Cutting Depth Powerhead Dimensions Air Motor Power Air Supply Requirements (maximum) Motor lubrication Water Supply Requirements Water Flow Operating Speed 10 in/25 cm, 15 in/38 cm, 20 in/50 cm, 25 in/63 cm FORCE4 & PowerGrit 20 L x 10.5 H x 12 W (58.5 cm x 26.5 cm x 30.5 cm) 6.5hp (5 kw) 90 psi (6 bar) 124 cfm (3.5 m³/min) Resin and acid-free SAE 5 W to SAE 10 W oil Minimum: 20psi (1.4 bar) Minimum: 2 gpm (8 lpm) 5,700 rpm (average free running) 4,900 sfm (average free running chain) Vibration ahv, eq Concrete Cutting (2) Front handle: 5.09 m/s 2 (K=0.2 m/s 2 ) Rear handle: 5.07 m/s 2 (K=0.2 m/s 2 ) Vibration ahv, eq PowerGrit Cutting (2) Front handle: 4.58 m/s 2 (K=0.2 m/s 2 ) Rear handle: 4.43 m/s 2 (K=0.2 m/s 2 ) Guaranteed Sound Power Level Lwa (1) 113 db(a); (Kwa=0.5 db(a)) (1) Measured in accordance with ANSI S /ISO3741:2010 (2) Measured in accordance with ISO5349-1:2001 and ISO22867: icsdiamondtools.com

7 701-A For Cutting Concrete & Pipe Built tough to stand up to everyday use in the harsh environment of concrete cutting. Cut with ease, speed and portability through reinforced concrete, brick, block, concrete pipe, ductile iron, cast iron, PVC and natural stone. The ICS powerful pneumatic power cutter is designed to cut through walls, floors and columns in a single pass. 701-A 701-A PG 701-A PNEUMATIC POWER CUTTERS AND CONSUMABLES PART NUMBER DESCRIPTION ICS 701-A Powerhead ICS 701-A Package with 15 in/38 cm Guidebar & FORCE4 chain ICS 701-A Package with 15 in/38 cm Guidebar & PowerGrit Chain ICS 701-A Package with 20 in/50 cm Guidebar & PowerGrit Chain ICS 701-A Guidebar 10 in/25 cm ICS 701-A Guidebar 15 in/38 cm ICS 701-A Guidebar 20 in/50 cm ICS 701-A Guidebar 25 in/63 cm ICS FORCE4-25 chain 10 in/25 cm ICS FORCE4-29 chain 15 in/38 cm ICS FORCE4-34 chain 20 in/50 cm ICS FORCE4-40 chain 25 in/63 cm ICS FORCE4-25 Premium L chain 10 in/25 cm ICS FORCE4-29 Premium L chain 15 in/38 cm ICS FORCE4-34 Premium L chain 20 in/50 cm ICS FORCE4-40 Premium L chain 25 in/63 cm Did you know... ICS offers a FORCE4 Premium S wide kerf chain (.375). It s ideal for header installations and much more PART NUMBER DESCRIPTION ICS FORCE4-25 Premium S chain 10 in/25 cm ICS FORCE4-29 Premium S chain 15 in/38 cm ICS FORCE4-34 Premium S chain 20 in/50 cm ICS FORCE4-40 Premium S chain 25 in/63 cm ICS FORCE4-25 Abrasive chain 10 in/25 cm ICS FORCE4-29 Abrasive chain 15 in/38 cm ICS FORCE4-34 Abrasive chain 20 in/50 cm ICS FORCE4-40 Abrasive chain 25 in/63 cm ICS PowerGrit Chain 15 in/38 cm ICS PowerGrit Chain 20 in/50 cm ICS PowerGrit Chain 25 in/63 cm ICS FORCE4-25 Premium S wide kerf (.375) chain 10 in/25 cm ICS FORCE4-29 Premium S wide kerf (.375) chain 1 5 in/38 cm ICS FORCE4-34 Premium S wide kerf (.375) chain 20 in/50 cm ICS FORCE4-40 Premium S wide kerf (.375) chain 25 in/63 cm ICS 701-A Drive Sprocket Airpac, pneumatic power cutter oiler Oiler, with hose whip 3/4 x 6ft Tensioner Kit Tensioning Scrench See the entire list of our guidebar and chain compatibility on pages icsdiamondtools.com

8 Hydraulic Power 890 SERIES The ICS 890 Series hydraulic cutting system offers the superior strength of FORCE4 technology and is equipped with integrated water delivery system that continuously feeds water to the blade. From the redesigned, more durable rear handle, to the easy to replace drive sprocket, this hydraulic power cutter is engineered to stand up to your toughest jobs. In a package that exceeds industry standards, this sleek powerhouse is packed with features designed to make it work as hard as you do. 890 TECHNICAL SPECIFICATIONS Powerhead Weight (1' hose whips) Bar Cutting Depth Length Height Width Hydraulic Supply Hydraulic Fluid Requirements (Type) Water Supply Requirements Water Flow Operating Speed 8 gpm (30 lpm) 12 gpm (45 lpm) 8 gpm (30 2,500 psi (172.5 bar) 23.5 lbs (10.6 kg) FORCE4 & PowerGrit 10 in/25 cm 15 in/38 cm 20 in/50 cm 25 in/63 cm 23 inches (58.5 cm) 10.5 inches (26.5 cm) 9.5 inches (24 cm) 12 gpm (45 2,500 psi (172.5 bar) PC HYDREX MV32 or equivalent Minimum: 20 psi (1.4bar) 6,100 rpm (avg. free running) 5,500 sfm (avg. free running chain) 2 gpm (8 lpm) minimum 6,500 rpm (avg. free running) 5,800 sfm (avg. free running chain) Torque* 7.0 ft-lbs (9.6 Nm) 10.0 ft-lbs (13.5 Nm) Horsepower (1) ** 6 hp (4.5 kw) 8 hp (6.0 kw) Guaranteed Sound Power Level L (2) wa Equivalent Sound Pressure at the Operator's Ear L (2) pa Vibration a hv, eq Concrete Cutting (3) Vibration a hv, eq PowerGrit Cutting (3) 107 db(a) (K=0.2 db(a)) 98 db(a) (K=0.7 db(a)) 2.0 m/s 2 (K=0.1 m/s 2 ) Front Handle 6.0 m/s 2 (K=1.4 m/s 2 ) Rear Handle 4.6 m/s 2 (K=0.1 m/s 2 ) Front Handle 4.8 m/s 2 (K=0.3 m/s 2 ) Rear Handle (1)Measured using 18HP hydraulic power pack (8 gpm/30 lpm and 23HP hydraulic power pack (12 gpm/45 lpm) at 2000psi/138 bar. (2) Measured in accordance with ISO3744:2010 (3) Measured in accordance with ISO5349-1: F4 890F4 HYDRAULIC POWER CUTTERS & CONSUMABLES* PART NUMBER DESCRIPTION ICS 890F4 Powerhead 8 gpm/30 lpm, 1 ft/30 cm hose whips ICS 890F4 Powerhead 8 gpm/30 lpm, 8 ft/2.5m hose whips ICS 890F4 Powerhead 12 gpm/45 lpm, 1 ft/30 cm hose whips ICS 890F4 Powerhead 12 gpm/45 lpm, 8 ft/2.5m hose whips ICS 890F4-FLUSH Powerhead 8 gpm/30 lpm, 1 ft/30 cm hose whips ICS 890F4-FLUSH Powerhead 8 gpm/30 lpm, 8 ft/2.5m hose whips ICS 890F4-FLUSH Powerhead 12 gpm/45 lpm, 1 ft/30 cm hose whips ICS 890F4-FLUSH Powerhead 12 gpm/45 lpm, 8 ft/2.5m hose whips ICS 890F4-15 Package 8 gpm/30 lpm, 1 ft/30 cm hose whips, case ICS 890F4-15 Package 8 gpm/30 lpm, 8 ft/2.5m hose whips, case ICS 890PG-15 Package 8 gpm/30 lpm, 1 ft/30 cm hose whips, case ICS 890PG-15 Package 8 gpm/30 lpm, 8 ft/2.5m hose whips, case ICS 890PG-15 Package 12 gpm/45 lpm, 1 ft/30 cm hose whips, case ICS 890PG-15 Package 12 gpm/45 lpm, 8 ft/2.5m hose whips, case ICS 890PG-20 Package 8 gpm/30 lpm, 1 ft/30 cm hose whips, case ICS 890PG-20 Package 8 gpm/30 lpm, 8 ft/2.5m hose whips, case ICS 890PG-20 Package 12 gpm/45 lpm, 1 ft/30 cm hose whips, case ICS 890PG-20 Package 12 gpm/45 lpm, 8 ft/2.5m hose whips, case ICS 890F4 Guidebar 10 in/25 cm ICS 890F4 Guidebar 15 in/38 cm ICS 890F4 Guidebar 20 in/50 cm ICS 890F4 Guidebar 25 in/63 cm ** Output ratings based on maximum input conditions and efficiency assumptions and may vary depending on power supply. *Guidebars, chains and drive sprockets also fit 880F4 8 icsdiamondtools.com

9 890PG Hydraulic Power 814PRO 890F4-FL 890F4 HYDRAULIC POWER CUTTER CONSUMABLES* PART NUMBER DESCRIPTION ICS FORCE4-25 chain 10 in/25 cm ICS FORCE4-29 chain 15 in/38 cm ICS FORCE4-34 chain 20 in/50 cm ICS FORCE4-40 chain 25 in/63 cm ICS FORCE4-25 Premium L chain 10 in/25 cm ICS FORCE4-29 Premium L chain 15 in/38 cm ICS FORCE4-34 Premium L chain 20 in/50 cm ICS FORCE4-40 Premium L chain 25 in/63 cm ICS FORCE4-25 Premium S chain 10 in/25 cm ICS FORCE4-29 Premium S chain 15 in/38 cm ICS FORCE4-34 Premium S chain 20 in/50 cm ICS FORCE4-40 Premium S chain 25 in/63 cm ICS FORCE4-25 Abrasive chain 10 in/25 cm ICS FORCE4-29 Abrasive chain 15 in/38 cm ICS FORCE4-34 Abrasive chain 20 in/50 cm ICS FORCE4-40 Abrasive chain 25 in/63 cm ICS PowerGrit Chain 15 in/38 cm ICS PowerGrit Chain 20 in/50 cm ICS PowerGrit Chain 25 in/63 cm ICS FORCE4-25 Premium S wide kerf (.375) chain 10 in/25 cm ICS FORCE4-29 Premium S wide kerf (.375) chain 15 in/38 cm ICS FORCE4-34 Premium S wide kerf (.375) chain 20 in/50 cm ICS FORCE4-40 Premium S wide kerf (.375) chain 25 in/63 cm ICS 890F4 Drive Sprocket ICS 890F4-FLUSH Drive Sprocket F4 Tensioner Kit F4-FL Tensioner Kit Tensioning Scrench See the entire list of our guidebar and chain compatibility on pages PRO It may be small but with as much power as the 890, the 814PRO is ready for the big jobs. Lighter than other hydraulic power cutters and the ability to cut perfectly square openings as small as 3.5 inches. Equipped with integrated water delivery system that continuously feeds water to the blade, and is a natural for toothing out brick and tuck-pointing along with other applications where a mix of portability and power are required. 814PRO TECHNICAL SPECIFICATIONS Powerhead weight Bar Cutting Depth Motor Speed Powerhead Dimensions Torque Horsepower (1) 814PRO HYDRAULIC POWER CUTTER AND CONSUMABLES PART NUMBER DESCRIPTION ICS 814PRO Powerhead 8 gpm/30 lpm ICS 814PRO Package 8 gpm/30 lpm with 13 in/33 cm Guidebar & TwinPRO Diamond Chain ICS TwinPRO-25 chain 13 in/33 cm ICS Guidebar 13 in/33 cm ICS 814PRO Drive Sprocket Tensioning Assembly Clip Splined Sprocket Washer Tensioning Scrench 15 lbs (6.8 kg) 13 inches (33 cm) TwinPRO 8800 rpm 14.3 inches (36.3 cm) Length 11.3 inches (28.7 cm) Height 9.2 inches (23.4 cm) Width 7.0 ft-lbs (9.6 Nm) 6 hp (4.5 kw) Hydraulic Supply 8 gpm (30 lpm), 2500 psi (172.5 bar) Noise Level 88 3 ft (1 m) Vibration Level 3.5 m/s 2 (front handle) Water Supply Requirement 2 gpm (8 lpm) minimum Water Flow Minimum 20 psi (1.4 bar) icsdiamondtools.com

10 Diamond Chain Technology Diamond chains are not all created equal, so insist on Diamond Chains from ICS, the people who invented the technology. As the inventors of Diamond Chain Technology, ICS is committed to continually improving the quality and versatility as well as the perfect blend of power, precision and efficiency: chains specifically designed for different power cutter types as well as the many different materials you encounter on the job. Choosing the right chain for your needs is essential to getting the best value for your purchase. FORCE4 From the company that revolutionized concrete power cutters comes a revolution in diamond chains: FORCE4. Designed to be the strongest, longest lasting diamond chains ever made, the FORCE4 series delivers unrivaled performance in professional cutting applications. PowerGrit Utilized by public and private water and wastewater departments worldwide, this patented platform exclusively from ICS is designed to cut a variety of materials. Featuring a brazed layer diamond coating on our FORCE4 platform, this chain makes your job safer, faster and easier. FORCE4 Tough general purpose diamond chains that excel in common cutting jobs. FORCE4 Premium S Speed and strength in one chain. Built to cut fast in medium to hard concrete. FORCE4 Premium L Delivering longer life in hard aggregate, this is the best choice when faced with the more demanding jobs. FORCE4 Abrasive A heavy duty diamond chain that excels in the harshest, most abrasive cutting environments. PowerGrit Pipe Cutting Chain The ICS pipe cutting chain addresses operator safety with its revolutionary grinding technology which eliminates rotational kickback and improves operator positioning when cutting pipe. This patented platform, exclusively from ICS, is designed to cut a variety of materials from ductile iron to plastic pipe with far less excavation. Chain Selection Chart Chain Applications Power Cutter Soft Stone/ Abrasive/Brick Natural Stone Medium Concrete/ Light Reinforcement Hard Concrete/ Heavy Reinforcement Ductile Iron/Cast Iron/PVC/HDPE FORCE4 General Purpose FORCE4 L Longer Cutting life 890 Series 701-A 695XL F4 890 Series 701-A 695XL F4 FORCE4 S Faster cutting speed 890 Series 701-A 695XL F4 FORCE4 Abrasive Ideal for brick & block 890 Series 701-A 695XL F4 PowerGrit For Utility Pipe 890 Series 701-A 695XL PG 10 icsdiamondtools.com

11 Accessories Hydraulic Hoses Quick disconnect, 25 ft/7.5m long, 3000psi. PART NUMBER DESCRIPTION TSS Vacuum Systems The Total Slurry Solutions provide an easy way to contain and dispose of slurry produced when wet-sawing or drilling in concrete, stone, or masonry. All TSS systems come with 15 feet (4.6 m) of heavy duty professional grade vacuum hose ft/7.5m hoses ICS 2-Stroke Oil Intensive laboratory and field testing have resulted in an oil formula that is cleaner burning, provides better thermal protection and an improved film barrier reducing piston ring wear. Protect your investment with work-proven ICS 2-stroke Engine Oil. 50:1 Mix PART NUMBER DESCRIPTION TSS-15 Vacuum system TSS-55 Vacuum system TSS Vacuum Attachment TSS Squeege TSS Aluminum Wand PART NUMBER DESCRIPTION oz (77 ml) 6-pack oz (77 ml) 24-pack Flow Adapter Valve Enjoy the convenience and efficiency of powering your ICS hydraulic power cutter from skid steers, backhoes, and other common construction equipment. Available for both 8 gpm and 12 gpm (30 lpm and 45 lpm) power cutters. PART NUMBER DESCRIPTION SpeedHook SpeedHook is an ingenious accessory designed to support the weight of ICS hydraulic power cutters, dramatically reducing operator fatigue and extending chain life gpm/30 lpm Flow adapter valve gpm/45 lpm Flow adapter valve ICS Large Carry Case Fits 880, 890 and 853PRO series. PART NUMBER PART NUMBER Works with: 890F4 Series 701-A Series 880F4 Series 853PRO Series DESCRIPTION SpeedHook System includes 42 inch (1 m) rail & mounting bracket icsdiamondtools.com

12 Global ICS Fit-Up Chart Use the charts on these two pages to determine what ICS guidebar is compatible with your tool. 680 Series 695 GC Series 695 F4 Series 890 Hydraulic 701-A Pneumatic Pentruder HF Power Cutter 814 Hydraulic K950-K970 HCP Prime HF Chainsaw Stihl RockBoss GUIDEBAR, (80CC/29SEG/58DL/12IN/30CM) X 3/8 pitch gas bars GUIDEBAR, (80CC/32SEG/64DL/14IN/35CM) X GUIDEBAR, (90CC/29SEG/58DL/12IN/30CM) X X X GUIDEBAR, (90CC/32SEG/64DL/14IN/35CM) X X X GUIDEBAR, 90CC/35SEG/70DL/16IN/40CM) X X X GUIDEBAR, (32SEG/64DL/14IN/35CM) GS461 X GUIDEBAR, (32SEG/64DL/14IN/36CM) HUSQ. X CUTTER'S EDGE Unbranded 14 Inch Bar Gas FORCE4 bars GUIDEBAR, 680PG X GUIDEBAR, F4(90CC/29SEG/54DL/16IN/40CM) X X GUIDEBAR, F4(90CC/25SEG/12IN/50DL/30CM) X X GUIDEBAR, F4 (25SEG/50DL/12IN/30CM) HUSQ X GUIDEBAR, F4 (29SEG/54DL/16IN/40CM) HUSQ X GUIDEBAR, (25SEG/50DL/13IN/33CM) X 3/8 pitch hydraulic bars GUIDEBAR, (25SEG/50DL/13IN/33CM) STANLEY DP/HYDROSTRESS 12" - 31 SEG BAR DP/HYDROSTRESS 16" - 37 SEG BAR DP/HYDROSTRESS 20" - 43 SEG BAR DP/HYDROSTRESS 24" - 49 SEG BAR Guidebar, 15 for DS Guidebar, 18 for DS11 FORCE4 Hydraulic and Air bars GUIDEBAR, F4 (25SEG/50DL/10IN/25CM) X X X GUIDEBAR, F4 (29SEG/50DL/15IN/38CM) X X X GUIDEBAR, FORCE4 (34SEG/20IN/50CM) X X X GUIDEBAR, F4 (40SEG/80DL/25IN/63CM) X X X GUIDEBAR, F4 (31SEG/18IN/45CM) STANLEY GUIDEBAR, CS UNITEC F4 (25SEG/10IN) X X X GUIDEBAR, CS UNITEC F4 (29SEG/15IN) X X X GUIDEBAR, CS UNITEC F4 (34SEG/20IN/50CM) X X X 12 icsdiamondtools.com

13 Cardi Cedima Dr. Bender Demco CS Unitec Weka Stanley DP/Hydrstress Cutter s Edge GUIDEBAR, (80CC/29SEG/58DL/12IN/30CM) 3/8 pitch gas bars GUIDEBAR, (80CC/32SEG/64DL/14IN/35CM) X X GUIDEBAR, (90CC/29SEG/58DL/12IN/30CM) GUIDEBAR, (90CC/32SEG/64DL/14IN/35CM) GUIDEBAR, 90CC/35SEG/70DL/16IN/40CM) X GUIDEBAR, (32SEG/64DL/14IN/35CM) GS GUIDEBAR, (32SEG/64DL/14IN/36CM) HUSQ CUTTER'S EDGE Unbranded 14 Inch Bar X Gas FORCE4 bars GUIDEBAR, 680PG GUIDEBAR, F4(90CC/29SEG/54DL/16IN/40CM) X GUIDEBAR, F4(90CC/25SEG/12IN/50DL/30CM) GUIDEBAR, F4 (25SEG/50DL/12IN/30CM) HUSQ GUIDEBAR, F4 (29SEG/54DL/16IN/40CM) HUSQ GUIDEBAR, (25SEG/50DL/13IN/33CM) 3/8 pitch hydraulic bars GUIDEBAR, (25SEG/50DL/13IN/33CM) STANLEY X DP/HYDROSTRESS 12" - 31 SEG BAR X DP/HYDROSTRESS 16" - 37 SEG BAR X DP/HYDROSTRESS 20" - 43 SEG BAR X DP/HYDROSTRESS 24" - 49 SEG BAR X Guidebar, 15 for DS11 X Guidebar, 18 for DS11 X FORCE4 Hydraulic and Air bars GUIDEBAR, F4 (25SEG/50DL/10IN/25CM) X X X GUIDEBAR, F4 (29SEG/50DL/15IN/38CM) X X X GUIDEBAR, FORCE4 (34SEG/20IN/50CM) X X X GUIDEBAR, F4 (40SEG/80DL/25IN/63CM) X X X GUIDEBAR, F4 (31SEG/18IN/45CM) STANLEY X GUIDEBAR, CS UNITEC F4 (25SEG/10IN) GUIDEBAR, CS UNITEC F4 (29SEG/15IN) GUIDEBAR, CS UNITEC F4 (34SEG/20IN/50CM) icsdiamondtools.com

14 The Pentruder high frequency drive system HF motors with reliable power and high efficiency Operate a full range of Pentruder high frequency, or HF, equipment simply by connecting the same Pentpak, remote control, motor, and cables to a wall saw, a wire saw or a core drill Superior materials. The motor is built of highest quality components, such as a hand built copper rotor, to ensure maximum performance. Helical precision ground gears transfer power reliably and with minimal losses and heat build up. Reliable 400 Hz technology. Highly reliable motor and long bearing life. A double cooling system for the HF motor gives sustained reliable power and high efficiency. Quick release coupling for HF-motor on saw head, wire saw or drill unit Robust and repairable connectors Very efficient cooling system Pentruder HF motors and Power Pack Slip clutch protects the HF-motor if a blade is jammed 8-20HF CBK 6-10HF 3P8 CW630/CW630 Flush Motors 15 kw O O R - 18 kw O O O O - 22 kw R R - R - Pentpak 427 R R R R R The HF motor is fixed on the CW630 chain saw R = Recommended, O = OK, - = not possible 14 icsdiamondtools.com

15 Modularity for professional concrete cutters Pentpak 427, a power pack for all Pentruder HF machines Thanks to our digital communication system the same high frequency drive system is used for wall sawing, wire sawing, drilling and chain sawing Intelligent software makes it possible to run the HF machines on such small fuses as 16 ampere (up to 22 kw) at volt. The power pack will recognize what motor and machine it is connected to and automatically use the right software for optimum easy of use and performance. Thanks to the intelligent Pentruder autofeed system, the high frequency machines will always work at maximum power and the cutting will be smooth and uninterrupted. The Pentpak high frequency power packs are made from top quality components chosen for their reliability and longevity. The HF power pack is insensitive for fluctuations in power. The frequency inverter works as a stabilizer for incoming power and protects the electrical drive motor. Versatile - The Pentpak HF power pack can drive all Pentruder HF machines Well protected against short cuts and overload Built in EMC filter Low weight Robust and repairable connectors Technical Data Pentruder high frequency drive system Pentpak 427 HF power pack 15 / 18 / 22 kw HF motor Input voltage Input frequency Minimum fuse Recommended fuse Current draw at max output Recommended gen.size V Hz 16 Ampere 40 Ampere 56 Ampere 45 kva/35 kw icsdiamondtools.com

16 Modules high frequency drive system Part number MCCS Code Description Weight Pentruder high frequency motors DIG HFR415 High frequency motor, 15 kw - 400V 29 lbs DIG HFR418 High frequency motor, 18 kw - 400V 36 lbs DIG HFR422 High frequency motor, 22 kw - 400V 39 lbs HFR415 HFR418 HFR422 Pentpak high frequency power pack, cables and remote control units for all Pentruder HF machines DIG PP427 High frequency power pack, V, HZ 57 lbs HV High voltage cable, 400V, 9m 14 lbs LV Low voltage cable, 24V, 9m with water hose 12 lbs CRC-HF Cable remote control 6.6 lbs WRC-HF WRC-HF Wireless remote control 3.4 lbs LV V Cable WRC-HF Wireless Remote Control PP427 Powerpack HV V Cable CRC-HF Cable remote control 16 icsdiamondtools.com

17 icsdiamondtools.com

18 The Pentruder high frequency wall saws offer Pentruder system features that perform for you every day High precision cuts Large diameter axial arm bearing Maximum rigidity for cut precision and reduced blade wear Optimal vertical roller configuration Provides alignment of forces for stability and cut precision Conical self cleaning low wear rollers Best support and control of the saw head Vertical orientation aluminum track Maximum stiffness and lightweight Easy setup Easy to use track system saves time and trouble when setting up the machine Swivelling track feet only needs to be set up once in each corner when cutting a rectangular opening Quick release for HF motor Installation or removal in a few seconds Quick disconnect blade flange coupling Radial mounting of the saw blade Scan the QR-code for short operator manuals 18 icsdiamondtools.com

19 a wide range of features for best productivity Best cutting performance Multistep gearbox Variable For maximum spindle speeds torque within any each blade gear size Maximum cutting control for each blade size Variable spindle speeds within each gear Maximum cutting control for each blade size Pentruder autofeed Maximum power output at all times for smooth and uninterrupted cutting Robust, lightweight build Aircraft grade billet aluminum Durable, lightweight saw head - stronger than castings Adjustable lightweight blade guards Choose from swing, parallel, full, or flush Robust and repairable connectors Made in house for maximum durability. Replace connector inserts easily with standard hand tools. High power and reliability Powerful HF motors High torque and power, superior materials and precision ground gears and efficient internal cooling 400 Hz technology High reliability for maximum up-time Internal HF motor double cooling system Sustained power and high efficiency Integrated HF motor slip clutch protects the HF motor if a blade is jammed Integrated stick-slip arm clutchreduces vibration for cut precision, reduces blade wear, and protects arm transmission icsdiamondtools.com

20 Overview Pentruder high frequency wall saws Real work tools for true professionals and everyday performance Part number MCCS Code Description Weight Pentruder high frequency wall saws DIG 8-20HF Saw head Pentruder 8-20HF for 15, 18 or 22 kw HF motors. 56 lbs DIG CBK Saw head Pentruder CBK for 15, 18, 22 or 27 kw HF motors 54 lbs DIG 6-10HF Saw head Pentruder 6-10HF for 15 or 18 kw HF motors 40 lbs Pentruder 8-20HF Pentruder CBK Pentruder 6-10HF Overview - Technical data Pentruder high frequency wall saws 8-20HF CBK 6-10HF HF motors 15, 28, 22 kw 15, 28, 22 kw 15, 28, 22 kw Max Torque 405 Nm 275 Nm 165 Nm Gearbox 4-speed 1- speed 1-speed Electronically variable speed Yes Yes Yes Max Blade Max Cutting Depth Max start blade (mm) Weight 56 lbs 54 lbs 40 lbs 20 icsdiamondtools.com

21 Recommended start package HF Wall Saws System accessories designed for easy and quick setup HF drive system HF wall saw 22kW HF motor Pentpak 427 WRC Wireless 24 V Cable 400 V Cable Remote Control Saw head Blade guards Blade flanges GH-SW1 Blade guard frame for standard guards GS Full mm full blade guard GSF Flush mm flush blade guard QE Blade flange assembly QE60-1 3/8 arbor QEF Flush 1 3/8 arbor Other accessories Track system Covers for digital connectors Toolkit TS Track 1.15 and 2.3 m TF2S Track foot symmetric x 3 TSP1 Track stop x 2 TSS300 Joint block Template for positioning of track foot Transport trolley TYHF for HF wall saws Watch short operator manuals for Pentruders Wall saws at our Youtube channel Scan the QR-code or visit us at icsdiamondtools.com

22 Pentruder 8-20HF Strong and versatile for all wall sawing jobs Specifications 8-20HF, 22 kw Saw blade motor Max continuous output power Min fuse Max output torque Spindle speed under load 1st gear 2nd gear 3rd gear 4th gear 400 Hz high frequency motor 22 kw 16 Amp 405 Nm in 1st gear rpm rpm rpm rpm In each gear, the spindle speed is electronically variable with the remote control. See operator s manual for detailed charts. The Pentruder 8-20HF will cut with optimum power on every size blade. It will help you do the most demanding jobs very efficiently. Can be used with the 15, 18 or 22 kw HF motor. For 31 up to 79 blades. The 8-20 wall saws are made for durable performance. Every day. 22 icsdiamondtools.com

23 Pentruder 8-20HF PENTRUDER 8-20 HF 22KW/30HP WALL SAW (MAX BLADE DIAMETER - 79, WILL TAKE 39 BLADE OUT OF CUT) PART NUMBER DESCRIPTION DETAILS HF 30 HP WALL SAW BASE PACKAGE 8-20 HF WALL SAW BASE PACKAGE INCLUDES THE FOLLOWING PART NUMBER DESCRIPTION DETAILS DIG PENTPAK 427 DIGITAL COMMUNICATION INPUT 480V 60HZ 3 PHASE DIG HF-MOTOR 22 KW/30HP 400V DIG.COM. 400 VOLT 400HZ 30 HP DIG PENTRUDER 8-20 HF DIG.COM. (SAW HEAD) UP TO 79 BLADE DIAM. 40 OUT OF CUT BLADE FLANGE, 1-3/8 W. HEX CPL BLADE FLANGE ASSEMBLY 1 3/ FRAME BLADE GUARD HOLDER CPL MOUNTS TO SAW HEAD, HOLDS GUARD BLADE GUARD FULL 32" REMOTE CONTROL HF CPL WIRED REMOTE CABLE 400V 30 DIGITAL COM. CPL CABLE 24V 30 DIGITAL COM. CPL TRACK FOOT SYMMETRIC CPL 8-20HF BASE PKG (P/N ) INCLUDES TRACK 45" DOUBLE RACK CPL TRACK 90.5 DOUBLE RACK CPL TRACK STOP TP3 CPL 8-20HF BASE PKG (P/N ) INCLUDES JOINT BLOCK FOR TRACKS CPL CONNECTS 2 TRACKS RECEPTACLE FEMALE 32A 400V FOR INPUT POWER 480V TOOLKIT PENTRUDER WALLSAW CPL HAND TOOLS WATER VALVE COMPLETE WITH COUPLING WATER CONNECTION TO PENTPAK WATER HOSE KIT FOR PENTPAK 427 WATER CONNECTION TO PENTPAK PROTECTIVE CAP, 100A DIG MALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 100A DIG FEMALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 24V DIG MALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 24V DIG FEMALE PROTECTS ELECTRICAL CONNECTIONS See our full list of optional items on page 31 icsdiamondtools.com

24 Pentruder CBK Strong and easy to use, all-round wall saw The Pentruder CBK offers a combination of high performance and easy handling. Can be used with all HF motor from Pentruder The spindle speed is varied electronically with the potentiometer. Easily handles blades up to 63. Technical Data Pentruder CBK wall saw Specifications CBK CBK, 22 kw Saw blade diameter max. 63 Max cutting depth with max. blade 28.5 Max start blade 36 Weight saw head 54 lbs Weight 22 kw HF motor 39 lbs Total weight incl. 22 kw HF motor 93 lbs Saw blade motor Max continuous output power Min fuse Max output torque Spindle speed under load 400 Hz high frequency motor 22 kw 16 Amp 275 Nm rpm The spindle speed is electronically variable with the remote control. See operator s manual for detailed charts. 24 icsdiamondtools.com

25 Pentruder CBK PENTRUDER CBK HF 22KW/30 HP WALL SAW (MAX BLADE DIAMETER - 63, WILL TAKE 36 BLADE OUT OF CUT) PART NUMBER DESCRIPTION DETAILS CBK HF 30 HP WALL SAW BASE PACKAGE CBK HF WALL SAW BASE PACKAGE INCLUDES THE FOLLOWING PART NUMBER DESCRIPTION DETAILS DIG PENTPAK 427 DIGITAL COMMUNICATION INPUT 480V 60HZ 3 PHASE DIG HF-MOTOR 22 KW 400V DIG.COM. 400 VOLT 400HZ 30 H/P DIG PENTRUDER CBK - HF DIG.COM. (SAW HEAD) UP TO 63 BLADE DIAM. 37 OUT OF CUT BLADE FLANGE, 1-3/8 W. HEX CPL BLADE FLANGE ASSEMBLY 1 3/ FRAME BLADE GUARD HOLDER CPL MOUNTS TO SAW HEAD, HOLDS GUARD BLADE GUARD FULL 32" REMOTE CONTROL HF CPL WIRED REMOTE CABLE 400V 30 DIGITAL COM. CPL CABLE 24V 30 DIGITAL COM. CPL TRACK FOOT SYMMETRIC CPL CBK HF BASE PKG (P/N ) INCLUDES TRACK 45" DOUBLE RACK CPL TRACK 90.5" DOUBLE RACK CPL TRACK STOP TP3 CPL CBK HF BASE PKG (P/N ) INCLUDES JOINT BLOCK FOR TRACKS CPL CONNECTS 2 TRACKS RECEPTACLE FEMALE 32A 400V FOR INPUT POWER TOOLKIT PENTRUDER WALLSAW CPL HAND TOOLS WATER VALVE COMPLETE WITH COUPLING WATER CONNECTION TO PENTPAK WATER HOSE KIT FOR PENTPAK 427 WATER CONNECTION TO PENTPAK PROTECTIVE CAP, 100A DIG MALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 100A DIG FEMALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 24V DIG MALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 24V DIG FEMALE PROTECTS ELECTRICAL CONNECTIONS See our full list of optional items on page 31 icsdiamondtools.com

26 Pentruder 6-10HF Service Saw Easy to use wall saw for the majority of cutting jobs The Pentruder 6-10HF is a very user friendly wall saw. The spindle speed is varied electronically with the potentiometer. There is no mechanical gearbox. Handles the majority of all wall sawing jobs very efficiently. Technical Data Pentruder 6-10HF wall saw Specifications 6-10HF, 15 kw 6-10HF, 18 kw Saw blade motor 400 Hz high frequency motor Max continuous output power 15 kw 18 kw Min fuse 16 Amp 16 Amp Max output torque 130 Nm 165 Nm Spindle speed under load rpm rpm The spindle speed is electronically variable with the remote control. See operator s manual for detailed charts. 26 icsdiamondtools.com

27 Pentruder 6-10HF Service Saw PENTRUDER 6-10 HF 15KW/20HP OR 18KW/24HP WALL SAW (MAX BLADE DIAMETER - 48, WILL TAKE 30 BLADE OUT OF CUT) PART NUMBER DESCRIPTION DETAILS HF WALL SAW BASE PACKAGE 15 KW HF WALL SAW BASE PACKAGE 18 KW 6-10 HF WALL SAW BASE PACKAGE INCLUDES THE FOLLOWING PART NUMBER DESCRIPTION DETAILS DIG PENTPAK 427 DIGITAL COMMUNICATION DIG HF-MOTOR 15 KW 400V DIG.COM. PACKAGE INCLUDES YOUR CHOICE OF DIG HF-MOTOR 18 KW 400V DIG.COM. ONE 15KW (20 HP) OR 18KW (24 HP) MOTOR DIG PENTRUDER, 6-10HF DIG. COM. (SAW HEAD) BLADE FLANGE, 1-3/8 W.HEX CPLL FRAME BLADE GUARD HOLDER CPL BLADE GUARD FULL 32" REMOTE CONTROL HF CPL WIRED REMOTE CABLE 400V 30 DIGITAL COM. CPL CABLE 24V 30 DIGITAL COM. CPL TRACK FOOT SYMMETRIC CPL 6-10 HF BASE PKG (P/N & ) INCL TRACK 45" DOUBLE RACK CPL TRACK 90.5" DOUBLE RACK CPL TRACK STOP TP3 CPL HF BASE PKG (P/N & ) INCL JOINT BLOCK FOR TRACKS CPL RECEPTACLE FEMALE 32A 400V TOOLKIT PENTRUDER WALLSAW CPL WATER VALVE COMPLETE WITH COUPLING WATER CONNECTION TO PENTPAK WATER HOSE KIT FOR PENTPAK 427 WATER CONNECTION TO PENTPAK PROTECTIVE CAP, 100A DIG MALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 100A DIG FEMALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 24V DIG MALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 24V DIG FEMALE PROTECTS ELECTRICAL CONNECTIONS See our full list of optional items on page 31 icsdiamondtools.com

28 Pentruder 3P8 HF wire saw Combines low weight with extraordinary performance Combines low weight with extra ordinary performance and is suitable for both small and very big jobs. Recommended to use with the 18 or 22 kw HF motor. Quick and easy set up thanks to the modular build up. Mostly a direct cut without extra satellite pulleys is possible. All of the wire saw modules weigh less than 55 lbs. The start of the wire is very easy thanks to the electrical automatic feed and high power of the drive motor. The automatic feed makes it very easy to run the saw and it also extends the lifetime of the wire. Optimal force transmission thanks to 20 main drive pulley. The wire wraps around the main drive pulley 270, which gives superb traction also when the wire has low tension during start up. Light weight modules Optimal force transmission to the wire Super strong HF motor Robust connectors Technical Data Pentruder 3P8 HF wire saw Specifications Drive Motor 400 Hz high frequency motor 18, 22 or 27 kw Max continuous output power 18 kw Main drive Pulley 20 Storage Pulley 8 O.D. Wire 8-12 mm Storage in pulleys 21 feet Storage capacity 3 feet per 1 foot stroke of the carriage, Max approximately 65 ft 3P8-DP-HF Drive pulley, electric 30 lbs 3P8-UA Upper Assembly 33 lbs 3p8-LA Lower Assembly 43 lbs + 28 lbs 28 icsdiamondtools.com

29 Recommended start package 3P8 wire saw with 70 mm column or track system as rig Same HF drive system as the wall saws with less investment HF drive system Rig 70 mm column system 22kW HF motor Pentpak 427 WRC Wireless Remote Control CE1-70 Carriage, with FE1 Friction brake 24 V Cable 400 V Cable Wire saw guard CE1-70-3P8 Upper carriage, automatic feed CN-F/M column, Female/Male coupling 47 x 2 BFC5 Base plate with fixed swivelling coupling 3P8-TG Guard, upper assembly Accessories 3P8-DPG Guard, drive pulley 3P8-LMG Guard, storage pulleys Wire saw modules 3P8-SSG Guard, slack side telescoping guard WSP2-90 Satellite pulleys, universal, 2-link, 90 WSP2-180 Satellite pulleys, universal, 2-link, 180 WSP1-F Satellite pulley, single, flush 3P8-UA Upper assembly Covers for digital connectors HK-1 Hand crank 3P8-LA Lower assembly 3P8-DP-HF Drive pulley, electric Slip clutch for HF motor Toolkit icsdiamondtools.com

30 Pentruder 3P8 HF wire saw PART NUMBER 3P8 WIRE SAW ADDITION (STORAGE CAPACITY UP TO 65 ) DESCRIPTION P8 WIRE SAW ADD ON BASE PACKAGE 3P8 WIRE SAW ADD ON BASE PACKAGE INCLUDES THE FOLLOWING PART NUMBER BFC5 WT-BFC5-300 RST-CN-U DESCRIPTION BASE PLATE BASE PLATE WHEEL KIT REAR SUPPORT, COLUMN W/O MALE CONE COLUMN 47.2 STEEL COMPLETE 3P8 ADD ON BASE PKG (P/N ) INCL CARRIAGE CE1 FOR WIRESAW 3P8 3P8 ADD ON BASE PKG (P/N ) INCL ELECTRIC FEED UNIT 3P8 (100:1) FRICTION BRAKE FOR CARRIAGE DRIVE PULLEY 3P8 HF CPL CLUTCH ASSEMBLY 3P LOWER ROLLER STORAGE 3P8 CPL UPPER ASSEMBLY 3P8 CPL GUARD, MAIN DRIVE PULLEY 3P8 CPL GUARD, STORAGE PULLEYS 3P8 CPL GUARD, TOP PULLEYS 3P8 CPL GUARD, SLACK SIDE CHANNEL 3P8 CPL TOOLKIT PENTRUDER 3P8 CPL PROTECTIVE CAP 24V DIG FEMALE 3P8 WIRE SAW OPTIONAL ITEMS NOT INCLUDED IN P/N SATELLITE PULLEY, STRAIGHT CPL 90 DEGREES ROTATION SATELLITE PULLEY, ANGLED CPL 180 DEGREES ROTATION PART NUMBER 3P8 WIRE SAW (STORAGE CAPACITY UP TO 65 ) DESCRIPTION P8 WIRE SAW BASE PACKAGE 3P8 WIRE SAW BASE PACKAGE INCLUDES THE FOLLOWING PART NUMBER DESCRIPTION DIG PENTPAK 427 DIGITAL COMMUNICATION DIG HF-MOTOR 22 KW/30HP 400V DIG.COM REMOTE CONTROL HF CPL WIRED REMOTE CABLE 24V 30 DIGITAL COM. CPL CABLE 400V 30 DIGITAL COM. CPL BFC5 BASE PLATE, BFC5, FOR WIRE SAW WT-BFC5-300 WHEEL KIT, WT-BFC5-300, FOR WIRE SAW RST-CN-U REAR SUPPORT, COLUMN W/O MALE CONE COLUMN 47.2 STEEL COMPLETE 3P8 BASE PKG (P/N ) INCL CARRIAGE CE1 FOR WIRESAW 3P8 3P8 BASE PKG (P/N ) INCL ELECTRIC FEED UNIT 3P8 (100:1) FRICTION BRAKE FOR CARRIAGE CLUTCH ASSEMBLY 3P DRIVE PULLEY 3P8 HF CPL LOWER ROLLER STORAGE 3P8 CPL UPPER ASSEMBLY 3P8 CPL GUARD, MAIN DRIVE PULLEY 3P8 C GUARD, STORAGE PULLEYS 3P8 CPL GUARD, TOP PULLEYS 3P GUARD, SLACK SIDE CHANNEL 3P8 CPL TOOLKIT PENTRUDER 3P8 CPL WATER HOSE KIT FOR PENTPAK WATER VALVE COMPLETE WITH COUPLING PROTECTIVE CAP, 24V DIG FEMALE PROTECTIVE CAP, 24V DIG MALE PROTECTIVE CAP, 100A DIG FEMALE PROTECTIVE CAP, 100A DIG MALE 3P8 WIRE SAW OPTIONAL ITEMS NOT INCLUDED IN P/N SATELLITE PULLEY, STRAIGHT CPL SATELLITE PULLEY, ANGLED CPL 30 icsdiamondtools.com

31 Pentruder Optional Items PENTRUDER OPTIONAL ITEMS PART NUMBER DESCRIPTION DETAILS WRC-HF WIRELESS REMOTE CONTROL HF TROLLEY CART FOR HF-SAWS, ASSEMBLED TRANSPORTS WALL SAW/ 2 TRACKS BLADE GUARD FULL 32" BLADE GUARD FULL 40" BLADE GUARD FULL 42" BLADE GUARD FULL 48" BLADE GUARD FULL 54" BLADE GUARD FULL 63" BLADE GUARD FULL 79" AVAILABLE ONLY FOR THE 8-20HF FLUSH BLADE GUARD 32" FLUSH BLADE GUARD 40" FLUSH BLADE GUARD FLUSH BLADE GUARD 48" FLUSH BLADE GUARD FLUSH BLADE GUARD 63" TRACK 33" DOUBLE RACK CPL TRACK 45" DOUBLE RACK CPL TRACK 67" DOUBLE RACK CPL TRACK 79" DOUBLE RACK CPL TRACK 90.5" DOUBLE RACK CPL TRACK 11' DOUBLE RACK CPL JOINT BLOCK FOR TRACKS CPL. CONNECTS 2 TRACKS TRACK FOOT SYMMETRIC CPL FOOT SWIVELS FOR FASTER SET UP ANGLE-ADJUSTABLE TRACK FOOT BLADEFLANGE SUB ASSY, 1IN W. HEX CPL 1 ARBOR FLUSH CUT. FLANGE 1" BC=4-1/4" CPL 1 ARBOR/PENTRUDER BLADE FLANGE SUB-ASS 1-3/8"BORE CPL BLADE FLANGE ASSEMBLY 1 3/ FLUSH CUTTING FLANGE 1-3/8" USA CPL 1 3/8 ARBOR/PENTRUDER SML. DRILL TEMPLATE, SYM. TRACK FOOT LRG. DRILL TEMPLATE, SYM. TRACK FOOT PROTECTIVE CAP, 100A DIG MALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 100A DIG FEMALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 24V DIG MALE PROTECTS ELECTRICAL CONNECTIONS PROTECTIVE CAP, 24V DIG FEMALE PROTECTS ELECTRICAL CONNECTIONS VALVE FOR WATER HOSE WITH QD WATER HOSE KIT FOR PENTPAK L WORM GEAR OIL, OMEGA LITRE L GEAR OIL, OMEGA LITRE L GEAR OIL, LITRE icsdiamondtools.com

32 Diamond Wire Continuing the tradition of providing products with the highest level of quality and performance available, ICS is proud to offer the next generation of diamond wire, specifically designed for the applications of cutting concrete, concrete with reinforcement and steel. ICS diamond wire is manufactured in a state-of-the-art facility with precision specifications to deliver the best in service, economy and performance. Brazed Wire Sintered Wire From pure steel to reinforced concrete, brazed wire optimized performance for long life and fast cutting speed. Electroplated Wire Designed to provide smooth operation and extremely efficient use of the diamonds. A proven and economical way to cut fast in concrete and concrete with light steel Hybrid Wire Offering several options for cutting a wide range of materials. The proprietary design efficiently uses diamonds that are tuned to each unique application allowing you to optimize your wire sawing operations. Optimized for performance, long life and fast cutting, this sintered, multilayer brazed hybrid wire cuts the most demanding materials. SPEC Wire Type Description Application BPM Bead Diameter Bead width Diamond Layer Cable Diameter Brazed B3 Brazed Multilayered (B3) For concrete structures with heavy steel, fastest cutting mm 5.5 mm Double 4.8 mm B10 Brazed Pure Steel (B10) For pure steel or concrete with more than 30% steel mm 5.5 mm Double 4.8 mm B17 Brazed Pure Steel (B17) Pure steel, longest life mm 5.5 mm Double 4.8 mm Sintered S14 Sintered Super Wire (S14) For concrete structures with round steel, covers most USA mm 6.5 mm 2.0 mm 4.8 mm applications Electroplated E5 Electroplated Plated Wire (E5) Fast cutting, rescue wire/finish wire mm 5.5 mm Single 4.8 mm E6 Electroplated Plated Wire (E6) Longer life, concrete grooving, dam cutting mm 5.5 mm Single 4.8 mm Hybrid For concrete structures with B1UV (Black) Hybrid Brazed Multilayer (B1UV) some reinforcement, high HP mm 6.0 mm 1.6 mm 4.8 mm machine B1UV (Blue) Hybrid Brazed Multilayer(B1UV) For concrete structures with some reinforcement, high HP machine mm 6.0 mm 1.6 mm 4.8 mm 32 icsdiamondtools.com

33 Diamond Wire Accessories Connectors STRAIGHT CONNECTOR FLEXIBLE CONNECTOR P/N SCREW CONNECTOR SOLID P/N FLEXIBLE CONNECTOR FLEXIBLE, 2 PINS P/N ICS Specs P/N TYPE PACKAGE SIZE (pcs.) SCREW OUTER DIAMETER (mm) P/N INNER DIAMETER SLEEVE (mm) PF1 Straight 30 pcs PF3 Flexible 5 pcs PF4 Screw 20 pcs PF7 Flexible 5 pcs FLEXIBLE, 1 PIN LENGTH OF SLEEVE (mm) Accessories DIE PRESS 4.8 mm CABLE P/N P/N ICS SPECS TYPE PF8 Die PF45 Press (5 tons) PF6 Pin Remover P/N PIN REMOVER 3.8 & 4.8 mm CABLE P/N For all flexible connectors icsdiamondtools.com

34 Pentruder universal drill rig for TS track Light-weight, yet very stable drill rig for any kind of drill motor Drill up to 29.5 with the CER Roller carriage and over 39 with the CEG Carriage. High quality in the smallest detail makes this drill rig very durable. Stepless adjustment of angle forwards and backward until 60. Track lengths from 33 up to 135 (11.2 ft) Mounting pattern to suit most common drill motors Back support for extra stability Wheel kits for easy transport. Technical Data Pentruder universal drill rig Weight BTS4 / BTS5 Base plate 18.2 lbs / 30 lbs TS Track, 0.85 / 1.15 / 2 / 2.3 / 3.45 m 15.4/foot CER-M3-U Carriage rollers, manual feed, for use with other drill motors 8.8 lbs Line and corner drilling carriage for TS track The most efficient way to line drill with any drill motor The CEL-TS Line and corner drilling carriage will make line drilling easy. For extra stability, use it with the CT-CEL Back support. The CEL-TS Line and corner drilling carriage can be used as a simple pivoting head, providing a fixed coupling at 90 angle to the track. With a combination of different MCCS modules, the professional concrete cutter can solve the most challenging drilling jobs. Used with any of the CER and CEG Carriages. 34 icsdiamondtools.com

35 Core drill modules overview A heavy duty drill rig with just a few modules Pivoting head and line drilling modules CEL-TS Line and corner drilling carriage for TS Track CT-CEL Back support for CEL-TS CEL-CN Line and corner drilling carriage for TS Track and CN Column CEG-PDT1 Pivoting head i ncl support Rig TS track system modules or CER-M3-U Carriage rollers, manual feed, for use with other drill motors ERMD1 Extension adapter HK-1 Hand crank Knuckle bar 400 mm, 1/2 TS Track, 33, 45, 67, 79, 90, 11.2ft. TP3 Track stop WT-BTS4 Wheel kit WT- BTS5-200 Wheel kit WT- BTS5-300 Wheel kit RT-TS1 Rear support for TS Track BTS4 Base plate BTS5 Base plate heavy duty icsdiamondtools.com

36 Overview Pentruder Concrete Cutting System HF-power packs Pentpak 427, 3-phase Remote control and cables Cable remote control CRC-HF Wireless remote control WRC-HF PP427 Up to 27 kw HV and LV , 400 V and 24 V cables with digital communication connectors Electrical motors 22 kw HF 18 kw HF 15 kw HF HFR HFR HFR kw HF kw HF Pentruder 8-20HF Pentruder CBK kw HF Pentruder 6-10HF Wall saws Wire saw modules Drilling modules 8-20HF, Max 79 blade Max cutting depth 36.4 CBK, Max 63 blade Max cutting depth HF, Max 48 blade Max cutting depth 20.2 Single T-slot track (TS) Line and corner drilling carriage CT-CEL Back support for CEL-TS Track system for Wall sawing Wire sawing Drilling TS TS TS TS TS TS ft Track foot symmetric TF2S Track foot angular TFAB Base plate BTS-4 TF2S Swivelling fork TFAB Angle cutting attachment, to be used with TF2S BTS-4 For TS Track WT-BTS4 Wheels for BTS-4 36 icsdiamondtools.com

37 TS Track system kw HF kw HF Pentruder 6-10HF Pentruder 3P8 3P8-DP-HF 6-10HF 3P8-LA Up to 65 ft storage capacity Universal 3P8-UA HK-1 Hand crank for CER and CEG carriages and MDU CER-M3-U Carriage Manual Universal Back support for TS track RST-TS1 Base plate BTS-5 BTS-5 For TS Track WT-BTS5-200 Wheels for BTS-4 WT-BTS5-300 Wheels for BTS-5 icsdiamondtools.com

38 Overview Pentruder Concrete Cutting System HF power pack Pentpak 427, 3-phase Remote control and cables Cable remote control CRC-HF Wireless remote control WRC-HF PP427 HF power pack Up to 27 kw HV , 400V cable with digital communication connectors LV , 24 V cables with digital communication connectors Electrical motors 22 kw HF 18 kw HF 15 kw HF HFR HFR HFR kw HF Pentruder 3P8 Wire saw modules Drilling modules 3P8-DP-HF Rig system with 70 mm column for wire sawing drilling 3P8-LA Up to 65 ft storage capacity Carriages Upper carriage CE1-70-3P8 Carriage el. feed Columns 3P8-UA Lower carriage CE1-70 Carriage man. feed FE-1 Friction brake HK-1 Hand crank for CER and CEG carriages and MDU Rear support CN 0.5 F/M 19.6 CN 1.2 F/M 47.2 CN 1.5 F/M 59 Base plate CN 0.5 F/J 19.6 Jacking CN 1.2 F/J 47.2 Jacking CN 1.5 F/J 59 Jacking RST-CN-U Universal RST-CN-M For male coupling Rear Support for CN column icsdiamondtools.com BFC5 Base plate fixed coupling WT-BFC5-300 Wheels for BFC5

39 CN Column system CEL-CN Line and corner drilling carriage for TS track and CN column CT-CEL Back support for CEL-CN and CEL-TS Track foot TF2S icsdiamondtools.com TF2S Swivelling fork 39

40 Exclusively distributed in the Americas by ICS Blount, Inc SE International Way Portland, OR ICSDIAMONDTOOLS.COM