HOTEL DISPENSER Model CHD22 /CHD30 Service Parts Manual

Transcription

1 CORNELIUS INC. HOTEL DISPENSER Model CHD /CHD0 Service Parts Manual Publication Number: 8005 Revision Date: May 0, 0 Revision: C Visit the Cornelius web site at for all your Literature needs. CHD/CHD0 Service Parts Manual Manual Number 8005

2 The products, technical information, and instructions contained in this manual are subject to change without notice. These instructions are not intended to cover all details or variations of the equipment, nor to provide for every possible contingency in the installation, operation or maintenance of this equipment. This manual assumes that the person(s) working on the equipment have been trained and are skilled in working with * electrical, plumbing, pneumatic, and mechanical equipment. It is assumed that appropriate safety precautions are taken and that all local safety and construction requirements are being met, in addition to the information contained in this manual. This Product is warranted only as provided in Cornelius Commercial arrant applicable to this Product and is subject to all of the restrictions and limitations contained in the Commercial arranty. Cornelius will not be responsible for any repair, replacement or other service required by or loss or damage resulting from any of the following occurrences, including but not limited to, () other than normal and proper use and normal service conditions with respect to the Product, () improper voltage, () inadequate wiring, () abuse, (5) accident, () alteration, (7) misuse, (8) neglect, (9) unauthorized repair or the failure to utilize suitably qualified and trained persons to perform service and/or repair of the Product, (0) improper cleaning, () failure to follow installation, operating, cleaning or maintenance instructions, () use of non-authorized parts (i.e., parts that are not 00% compatible with the Product) which use voids the entire warranty, () Product parts in contact with water or the product dispensed which are adversely impacted by changes in liquid scale or chemical composition. Contact Information: To inquire about current revisions of this and other documentation or for assistance with any Cornelius product contact: Trademarks and Copyrights: This document contains proprietary information and it may not be reproduced in any way without permission from Cornelius. This document contains the original instructions for the unit described. CORNELIUS INC 0 Regency Drive Glendale Heights, IL Tel: Printed in U.S.A.

3 CHD and CHD0 Service Parts This is the list of service parts and wiring diagrams for all versions of these two hotel dispensers. Pay close attention to the voltage and/or cycles to be sure of ordering the correct part. Table of Contents Front and Top Panels Page CHD0 & CHD Front Panel Page CHD0 and CHD0Front Panel & Related Parts Page Side, Back and Interior Panels Page 5 Dispensing Components Page Ice Chute Mechanism Page 7 Ice Catch Pan Page 8 Control Box Page 9 iring Diagram, 5 volt, 0 Hz Basic and ater Station Page 0 Schematic Diagram, Basic and ater Station Models Page iring Diagram, 0 volt, 50 Hz Basic Page iring Diagram for Coin Mechanism Model Page Schematic Diagram for Coin Mechanism Model Page ebsite: Telephone Number All Departments

4 CHD and CHD0 Service Parts Front and Top Panels c b a b Gasket tape, order by ft. a Use 7.5 for CHD0, 9.5 for HD b Use 7.88 c Use 7.5 for CHD0, 9.5 for HD 00 CHD0 top panel 005 CHD top panel 009 Top panel screw 00 CHD0 panel insulation 007 CHD panel insulation 5 See Page CHD0B front panel See Page CHD0N front panel See Page CHD front panel 000 Ice Deflector 0 inch wide only (NOT SHON) " mounting bracket 009 " mounting bracket Legs ( ea) Page

5 CHD and CHD0 Service Parts CHD0B & CHDB Front Panel Screw 0088 CHD0 stiffener 0089 CHD stiffener 00 Retainer 0009 CHD0 side flange 000 CHD side flange CHD0 Front panel* 007 CHD Front panel* 007 Snap bushing 7 00 Screw Screw Foam gasket, per side Grill a 0007 CHD, CHD0, CHD0 dispense housing b 0075 CHD0 dispense housing * includes items thru Page

6 CHD and CHD0 Service Parts CHD0N and CHD0 Front Panel & Related Parts a, b ater inlet fitting 00 Straight connector 00 Pal nut 00 Male elbow connector 5 00 ater faucet 0058 Tubing, order per ft Shut off valve Indicator light backing asher for coin mech Lockwasher 0078 Hex nut (8-) 0079 Right side flange for coin mech model 007 Door shim 007 Door and lock a 005 Lock and key b 005 Key Coin box screw 0095 Coin box Coin mechanism 0050 Coin switch Mounting screw Ready light CHD0 left side flange 00 Coin mech label Page

7 CHD and CHD0 Service Parts Side, Back and Interior Panels a Screw 0079 CHD0 back panel 000 HD back panel 0078 Right side panel, includes mounting hardware 000 Screw Bin support, right 0080 Bin support, left 0078 Drain fitting Catch pan support CHD0 base stiffener 009 CHD base stiffener Screw Hose clamp 0075 Hose clamp Page 5 00 Drain hose 007 Drain pan, assembled 007 ire clamp (coin mech) Switch plate top 5a 009 Switch plate 007 Switch, interlock Left side panel, includes mounting hardware Plastic nut Strike (ball stud) Insert 0057 Terminal cover 008 CHD0 support bracket 008 CHD support bracket 007 Motor capacitor 0070 Strap

8 CHD and CHD0 Service Parts Dispensing Components Hitch pin 00 Sweep arm 007 Dispense rotor 007 Hub plate CHD0 bin assembly 007 CHD bin assembly 000 Insulation pad Loop clamp Screw Insulation for hub Dispense gearmotor, dual voltage 0075 Retainer 00 Cupped washer 005 Spring 00 ¼ turn stud Screw 008 Mounting plate Screw Hub Switch guard Spout 009 Gasket 008 Gasket, each end 0085 Bin door Page

9 CHD and CHD0 Service Parts Ice Chute Mechanism Clip 0070 Screw 009 Bracket 008 Door lock Door 000 ire Dispense chute Vend switch Page 7

10 CHD and CHD0 Service Parts Ice Catch Pan Screen 007 Screw 007 Drain top 0077 Complete assembly as shown O-ring 0077 Drain bottom 7 00 Drain fitting Drain pan bracket Foam pad Drain guard Page 8

11 CHD and CHD0 Service Parts Control Box Coin mech timer 00 Screw 005 Adjustment module 0070 Screw 5 00 Loop clamp 0078 Snap bushing Free vend switch 8 00 Strain relief Hz off cycle timer Hz off cycle timer Control box cover Not shown 00 0 Hz harness, basic and water 00 Coin mech harness Hz harness volt power cord volt power cord Page 9

12 CHD and CHD0 Service Parts iring Diagram, 5 volt, 0 Hz Basic and ater Station GEAR MOTOR ALL CONTROLS SHON IN NORMAL ICE DISPENSING MODE BN R O BU INLET POER CORD OFF CYCLE AGITATION TIMER EARTH GROUND HOURS OFF SEC. ON ADJUSTABLE DISPENSING BU COM RUN CAP NO R BN 5 O INTERLOCK USE COPPER CONDUCTORS ONLY Page 0

13 L CHD and CHD0 Service Parts Schematic Diagram, Basic and ater Station Models L OFF CYCLE AGITATION ADJ. TIMER HOURS OFF SEC. ON GEARBOX MOTOR DISPENSING INTERLOCK RUN CAP Page

14 CHD and CHD0 Service Parts iring Diagram, 0 volt, 50 Hz Basic GEAR MOTOR ALL CONTROLS SHON IN NORMAL ICE DISPENSING MODE BU R O BN INLET POER CORD BU BN EARTH GROUND DISPENSING / BU COM NO R O INTERLOCK OFF CYCLE AGITATION TIMER HOURS OFF SEC. ON ADJUSTABLE RUN CAP BN USE COPPER CONDUCTORS ONLY Page

15 CHD and CHD0 Service Parts iring Diagram for Coin Mechanism Model INLET POER CORD EARTH GROUND FREE VEND R/ DISPENSING BU COM NO R BU GEAR MOTOR BN R O /BU ADJ. COIN MECHANISM TIMER OFF CYCLE AGITATION TIMER: SEC. ON HRS. OFF (ADJ.) R/ /BU Y () 5K OHM ATT RESISTOR COIN MECH. INDICATOR LIGHT / COIN MECH. 5 BN O INTERLOCK RUN CAP O USE COPPER CONDUCTORS ONLY ALL CONTROLS SHON IN NORMAL ICE DISPENSING MODE Page

16 CHD and CHD0 Service Parts Schematic Diagram for Coin Mechanism Model L N OFF CYCLE AGITATION ADJ. TIMER COIN MECH. FREE VEND () 5K OHM ATT RESISTOR COIN MECH. ADJ. TIMER COIN MECH. INDICATOR LIGHT DISPENSING INTERLOCK GEAR MOTOR RUN CAP Page