Fire dampers ETCE and ETCS TECHNICAL DATA

Transcription

1 Fire dampers ETCE and ETCS TECHNICAL DATA

2 2 Fire dampers ETCE and ETCS Veloduct ETCE fire damper is CE marked based on product standard EN 15650:2010 and tested according to the test standard EN ETCE meets the requirements of fire class EI 60 S / EI 90 S / EI 120 S. The damper casing also fulfils the requirements of leakage class C according to EN Fire damper is available both with a builtin electrical actuator and with a fuse mechanism. ETCE fire damper is designed for installation in a wall or intermediate floor for circular duct connection. The damper casing is manufactured from hotgalvanised sheet steel and the blade from fireinsulating calcium silicate material. The fire damper is installed inside the fire compartment construction element according to the installation instructions. The damper is equipped with a Veloduct joint, which provides air tight duct installation. ETCE motorized dampers have passed a durability test of cycles (open/close) and can be used also for daily ventilation purposes. The use of a motorized damper enables automatic function testing (e.g. by our control and monitoring system FICO) and the use of a smokedetectorbased release system. The motor is equipped with builtin microswitches for both open and closed position. When using our control and monitoring system FICO, the actuator is always of type 24 V. See FläktGroup control and monitoring system FICO128 or FICO2. The damper is also available with electrical actuator of 230 V. The damper version with the fuse mechanism is always equipped with microswitch (close position). PRODUCT DATA Sizes Ø mm CE marked (EN 15650:2010) Declaration of Performance ETCE 011CPR Declaration of Performance ETCS 018CPR Fire class according to EN EI 60 (ve ho i <> o) S EI 90 (ve ho i <> o) S EI 120 (ve ho i <> o) S Testing according to EN Fire damper meets the requirements of leakage class 2 according to EN 1751 Fire damper casing meets the requirements of leakage class C according to EN 1751 aimum pressure against a closed damper is allowed to be 2500 Pa, corresponding to pressure class B PRODUCT CODE EXAPLE Fire damper ETCE otorized ETCE damper is available also with stainless steel damper casing (sizes Ø ). Ordering code for stainless steel model is ETCSaaaabbc. Technical data and dimensions as for ETCE.

3 Fire dampers ETCE and ETCS 3 TECHNICAL DATA PRESSURE DROP, SOUND DATA PRESSURE DROP AND SOUND PRESSURE LEVEL q v (m 3 /h) P t (Pa) L p10a db(a) , q v (l/s) SOUND POWER LEVEL CORRECTION BY OCTAVE BANDS Octave bans (Hz) Correction koct Tolerance ± DEFINITIONS q v Air flow l/s, m 3 /h L Woct Sound power level in a duct by octave bands db L p10a Sound pressure level with 4 db room attenuation (10 m 2 sab) db(a) K oct Correction db Δp t Pressure drop Pa

4 4 Fire dampers ETCE and ETCS DIENSIONS AND WEIGHTS, FIRE CLASSIFICATION DIENSIONS AND WEIGHTS otorized damper sizes Damper with thermal fuse sizes A A B 1) B 1) L L L L C ma C ma 1) Distance from the wall Size A (mm) ±10 B (mm) ±10 L (mm) C ma (mm) * D125 with 2 reduction pieces BDED , total length 556 mm. otorized damper Weight (kg) Damper with thermal fuse 100 (125)* 416* ,2 2, ,8 2, ,1 2, ,3 2, ,1 3, ,9 4, ,1 5, ,3 5, ,3 7, , , , ,0 FIRE CLASSIFICATION Size Installation method Fleible wall Rigid wall Ceiling Fire resistance EI 60 (ve ho i<>o) S EI 90 (ve ho i<>o) S EI 120 (ve ho i<>o) S EI 60 (ve ho i<>o) S EI 90 (ve ho i<>o) S EI 120 (ve ho i<>o) S EI 60 (ve ho i<>o) S EI 90 (ve ho i<>o) S EI 120 (ve ho i<>o) S Pressure in fire test (Pa)

5 Fire dampers ETCE and ETCS 5 PRODUCT CODE AND ACCESSORIES DESCRIPTION FläktGroup CE marked fire damper ETCE is suitable for installation into building elements of fire class EI 60 / EI 90 / EI 120 made of concrete, lightweight concrete, brick or gypsum board. PRODUCT CODE Fire damper ETCEaaaabbc Size (aaa) Connection diameter in mm 0100, 0125, 0150, 0160, 0200, 0250, 0300, 0315, 0400, 0500, 0630, 0800, 1000 Actuator (bb) 02 = fuse mechanism with microswitch, 70 C (sizes ) 03 = 24V AC/DC and thermal trip (sizes ) 05 = 230V AC and thermal trip (sizes ) Actuator model (c) 0 = fuse mechanism 3 = FG motorized (sizes ) 2 = motorized B (sizes ) ACCESSORIES Inspection piece Size (aaaa) Grille Size (aaaa) Control system See a separate brochure. SPARE PARTS Fuse part, 70 C for fuse mechanism INSPECTION PIECE FWDAAAA1 Ød FWDaaaa1 FNDaaaa11 FICO128 / FICO2 ETFF9901 Fire damper, stainless steel casing ETCSaaaabbc Size (aaa) Connection diameter in mm 0100, 0125, 0150, 0160, 0200, 0250, 0300, 0315, 0400, 0500, 0630 L Actuator (bb) 03 = 24V AC/DC and thermal trip 05 = 230V AC and thermal trip FWD length L consist of pieces BDEG+BDE+BDET GRILLE FNDAAAA11 Actuator model (c) 2 = motorized B

6 6 Fire dampers ETCE and ETCS WIRING WIRING DIAGRA FOR DAPER OTOR Power supply ~ T AC 230 V AC 24 V DC 24 V Status data of limit switches 1 2 S1 S2 S3 S4 S5 S6 < 5 < 80 Tf1 Tf2 Tf3 LED ACTUATOR ELECTRICAL DATA Fire damper size Voltage Equipment a power hold/drive Power for wire sizing V AC/DC 230C AC 24V AC/DC 230C AC 24V AC/DC 230C AC Storage temperature of fire damper actuator should not eceed +50 C 0,8 W / 2,5 W 1,1 W / 3,5 W 1,4 W / 4,0 W 2,1 W / 5,0 W 2,0 W / 7,0 W 3,0 W / 8,5 W 4 VA 6,5 VA 6 VA 10 VA 10 VA 11 VA WIRING DIAGRA FOR ICROSWITCH Damper blade position: CLOSE icroswitch indicating: close position (standard) BLACK BLUE RED Damper blade position: OPEN icroswitch indicating: close position (standard) BLACK BLUE RED

7 Fire dampers ETCE and ETCS 7 INSTALLATION INSTALLATION INTO BUILDING ELEENTS (WALLS AND INTEREDIATE FLOORS) ADE OF CONCRETE, LIGHTWEIGHT CONCRETE OR BRICK WITH FIRE CLASS EI 60 INSTALLATION INTO BUILDING ELEENTS ADE OF GYPSU BOARD OR SIILAR ATERIAL WITH FIRE CLASS EI 60 S 100 mm Size (mm) 200 mm Installation opening Ø (mm) 100 (125)* mm/ 140 mm (Ø100400/ Ø ) 116 mm Size (mm) Installation opening Ø (mm) 100 (125)* * D125 with 2 reducer pieces BDED * D125 with 2 reducer pieces BDED

8 8 Fire dampers ETCE and ETCS INSTALLATION INSTALLATION INTO BUILDING ELEENTS (WALLS AND INTEREDIATE FLOORS) ADE OF CONCRETE, LIGHTWEIGHT CONCRETE OR BRICK WITH FIRE CLASS EI 90 / EI 120 INSTALLATION INTO BUILDING ELEENTS ADE OF GYPSU BOARD OR SIILAR ATERIAL WITH FIRE CLASS EI 90 / EI 120 S 110 mm Size (mm) 200 mm 120 mm/ 140 mm (Ø100400/ Ø ) Installation opening Ø (mm) 100 (125)* Size (mm) 126 mm Installation opening (mm) Etra gypsum board (mm) min. thickness 12,5 mm 100 (125)* * D125 with 2 reducer pieces BDED Complete installation, operation and maintenance instructions can be found on the FläktGroup home page Installation instructions are also delivered with every fire damper. For additional information, contact the nearest FläktGroup sales representative. * D125 with 2 reducer pieces BDED

9 Fire dampers ETCE and ETCS 9

10 FG_DC_9502GB_ETCE_TE_ _R1 Copyright 2018 FläktGroup ETCE 9502 FläktGroup is the European market leader for smart and energy efficient Indoor Air and Critical Air solutions to support every application area. We offer our customers innovative technologies, high quality and outstanding performance supported by more than a century of accumulated industry eperience. The widest product range in the market, and strong market presence in 65 countries worldwide, guarantee that we are always by your side, ready to deliver Ecellence in Solutions. PRODUCT FUNCTIONS BY FLÄKTGROUP Air Treatment Air ovement Air Diffusion Air Distribution Air Filtration Air anagement & ATD s Air Conditioning & Heating Controls Service» Learn more on or contact one of our offices