Systemair Fire Dampers

Transcription

1 Systemair Fire Dampers Fire resistance class EI60S; EI90S and EI120S

2 As standard, all fire dampers are designed and certified to comply with EI-S performance attributes. fire dampers are intended to be embedded into fire partition walls. Installation of these units is described in the Installation, Operation and Maintenance manual for square and circular fire dampers. As standard, all dampers can be supplied with a manual actuator, optional accessories, e.g. microswitches, electromagnets, or a servo-driven actuator and communication control units. Detailed description regarding individual models can be found in the Systemair s Product Catalog. Fire Dampers With a Manual Actuator Fire damper automatically sets itself to closed position if the thermal fuse link gets ruptured or a signal is given to the electromagnet to release the damper blade from an open to closed position. After the closure, the damper blade is mechanically secured in the closed position and can only be opened manually. The fast blow fuse releases the link mechanism as soon as the air temperature in the duct system reaches 72 C. The damper can also be closed electronically by receiving a signal from the building s control system, provided that the damper is equipped with an actuating electromagnet for this purpose. Servo-driven Fire Dampers Fire dampers can be equipped with a servo that closes the damper blade on demand of the Building Management System or based on a signal received from the thermoelectric fuse. Servo fitted fire dampers are standardly equipped with an electrothermal fuse which, when having reached or exce eded the ambient temperature of 72 C with a tolerance of ±1.5 C, activates the servo and closes the damper blade within 20 seconds. Installation, Operation and Maintenance Fire dampers must be installed, operated and maintained according to the Installation, Operation and Maintenance manual. Operating Conditions Dampers equipped with manual actuating mechanism and thermal fuse with a low melting alloy may be operated in a workplace where the operating temperatures fall in the range between -10 to 65 C. A damper equipped with a manual actuating mechanism and an electromagnet may be operated in a workplace where the temperature falls in the range of -10 to 40 C. Dampers equipped with a servo and a thermal fuse may be operated in a workplace with the ambient operating temperatures within the range between -10 to 65 C. IMPORTANT CAUTION: Adjust the fire damper to the working position OPEN by activating the ser vo. After opening and detention of the damper into the opened position using the crank, it will only be possible to close the damper by means of crank and can not function properly! The active fire-proof sealing must not be exposed to direct contact with water. The maximum air flow speed is 12 m/s with purge air without mechanic or chemical contamination with uniform flow, without condensation, ice coating and ice. The maximum allowable pressure difference in front and behind the closed blade is 1200 Pa. The device is not actuated until the ambient temperature reaches 65 C. In case of need of adjustment for higher temperatures in the working place it is advisable to consult such demands with the producer and indicate them in the purchase order accordingly. In terms of their construction, the dampers are designed for use with a horizontal, vertical or angled blade axis. Transportation, Storage and Operating conditions It is necessary to transport the dampers by such means of transport that provide a cover and secured on pallets. When handling the dampers during transportation, the dampers must be protected against damage and weather conditions. The damper blades must be transported in the CLOSE position. It is recommended to store these products in a closed, dry, area where the temperature falls within the range of -10 C to +50 C. The temperature during storage, transportation and operation must not exceed 65 C! Material used and disposal The product contains steel, zinc, calcium- -silicate board, graphite fire-proof laminate, polyurethane foam and ethylene- -propylene dry rubber. These are processed in compliance with local regulations. The product does not contain any dangerous materials. Warranty The manufacturer provides a 24-month warranty period starting on the date of expedition. Appendix Any demands regarding deviations from the above mentioned technical specifications and conditions shall be discussed with the manufacturer. The manufacturer reserves the right to perform any modifications of the product without prior notice, provided that such changes have no effect on the quality and performance of the product. The most recent state of our products is available at 2

3 Damper Codes and Types ZV; Basic model with manual crank and an actuating mechanism with spring return release driven by a fusible thermal link set to 72 C. DV1; ZV + closed position indication with a 24 V contact switch DV1-2; ZV + open and closed indication with 24 V contact switches DV2; ZV + closed position indication with a contact switch 230 V DV2-2; ZV + open and closed indication with 230 V contact switches DV3; ZV + 24 V AC electromagnetic re lease mechanism (release takes place DV4; ZV V AC electromagnetic re lease mechanism (release takes place DV5; ZV + 24 V AC electromagnetic release mechanism (release takes place when the electromagnet is activated) plus 24 V switch indicating the damper s closed position DV5-2; ZV + 24 V AC electromagnetic release mechanism (release takes place plus 24 V switches indicating the damper s closed and open position DV6; ZV V AC electromagnetic release mechanism (release takes place plus 230 V switch indicating the damper s closed position DV6-2; ZV V AC electromagnetic release mechanism (release takes place plus 230 V switches indicating the damper s closed and open position Servo-operated Fire Dampers: DV7; spring return servo-operated fire dampers (230 V AC) without electro-thermal fuse, with auxiliary switches DV7-T; spring return servo-operated fire dampers (230 V AC) with electro-thermal fuse and auxiliary switches DV9; spring return servo-operated fire dampers (24 V) without electro-thermal fuse with auxiliary switches DV9-T; spring return servo-operated fire dampers (24 V) with electro-thermal fuse and auxiliary switches DV9-ST; spring return servo-operated fire dampers (24 V) without electro-thermal fuse, with auxiliary switches and Belimo BKN supply and communication unit. DV9-T-ST; spring return servo-operated fire dampers (24 V) with electro-thermal fuse, auxiliary switches and Belimo BKN supply and communication unit DV9-W; spring return servo-operated fire dampers (24 V) with auxiliary switches and cables for the Belimo BKN supply and communication unit DV9-T-W; spring return servo-operated fire dampers (24 V) complete with elect ro- thermal fuse, auxiliary switches and with the cables for the Belimo BKN supply and communication unit Connection Type O by Spiro Safe sealing P by mounting flanges Installation Accessories PR; 1 set of 8 cover plates made from calcium-silicate boards (when using during installation please see the Installation, Operation and Maintenance manual) Ordering Codes for Circular FD: -R-EI Ordering Codes for Square FD: -S-EI Fire resistance class Dimension Operation Type 60S, 90S and 120S ød ZV DV1 to DV9 - T-W Standard O Connection Types Mounting Flanges P Installation Accessories PR Fire resistance class Dimension Operation type Installation Accessories 90S and 120S L x H ZV DV1 to DV9 - T-W PR NOTE: E = Casing integrity, I = Thermal insulation, S = Smoke leakage 3

4 -R-EI60S, -EI90S and -EI120S We offer a wide range of dampers and dimensions with fire resistance of 60, 90 and 120 minutes for circular piping. Circular fire dampers are tested in accordance with the EN regulation and classified in accordance with the EN regulation: -EI60S-ZV, DV1 to DV9-T-W For dimensions: ø 100 mm to ø 630 mm Certification no: SK01-ZSV-0159 Classification protocol no: FIRES-CR NURE, FIRES-CR AUPE Test report no: FIRES-FR AUNE, FIRES-FR AUNE2 EI 60 (ve ho i o) S -EI90S-ZV, DV1 to DV9-T-W For dimensions ø100 mm to ø 1000 mm Certification no: SK01-ZSV-0160 Classification protocol no: FIRES-CR NURE4, FIRES-CR NURE4, FIRES-CR AUPE Test report no: FIRES-FR AUNE, FIRES-FR AUNE2 EI 90 (ve ho i o) S -EI120S-ZV, DV1 to DV9-T-W For dimensions ø 100 mm to ø 1000 mm Certification no: SK01-ZSV-0157 Classification protocol no: FIRES-CR NURE4, FIRES-CR NURE Test report no: FIRES-FR AUNE, FIRES-FR AUNE EI 120 (ve ho i o) S 4

5 199 (EI60S) 203 (EI90S) 203 (EI120S) Damper Parts Description: 1. Damper blade 2. Casing 3. Release mechanism ød 4. Electromagnet 5. Terminal switch 6. Inspection (control) opening ød/ W ød+121 Fig. 1: Manually operated fire damper construction for sizes ø 100 to ø 225 mm 7. Servo 8. Thermo-electrical fuse 9. Supply and communication unit Belimo BKN (EI60S) 203 (EI90S) 203 (EI120S) 199 (EI60S) 203 (EI90S) 203 (EI120S) ød ød W 1 ød+110 ød/ W 1 8 ød/2+80 ød+110 Fig. 2: Manually operated fire damper construction for sizes ø 250 to ø 1000 mm Fig. 3: Servo-operated circular fire damper Main dimensions for manually operated fire dampers EI60S, EI90S, EI120S EI90S, EI120S ød (mm) W (mm) * (mm) 37,5 87,5 * (mm) 5 27,5 52,5 77, Q (kg) 3,6 4 4,8 5,2 5,6 6,5 7 8,4 9,4 10,6 12,8 15,5 17,9 20,4 23,7 27,6 33,8 39,8 46,6 Tab. 1: Dimensions and weights for manually operated circular fire dampers * overhang of the open blade including sealing and gap by opening Main dimensions for servo-operated circular fire dampers EI60S, EI90S, EI120S EI90S, EI120S ød (mm) W (mm) * (mm) * (mm) Q (kg) 3,6 4 4,8 5,2 5,6 6,5 7 8,4 9, ,1 Tab. 2: Dimensions and weights for servo-operated circular fire dampers * overhang of the open blade including sealing and gap by opening 5

6 -S-EI90S and -EI120S We offer a wide range of fire dampers and dimensions with fire resistance of 90 and 120 minutes for square or rectangular piping. Square fire dampers are in compliance with the EN regulation and classified in accordance with the EN :2005 regulation: -S-EI90S-ZV, DV1 to DV9-T-W For dimensions: 100 x 100 mm to 1600 x 1000 mm Certification no: SK01-ZSV-0118 Classification report no: FIRES-CR NURE4 Test report no: FIRES-FR AUNE, FIRES-FR AUNE, FIRES-FR AUNE2, FIRES-FR AUNS2, FIRES-FR AUNS2 EI 90 (ve ho i o) S -S-EI120S-ZV, DV1 to DV9-T-W For Dimensions 200 x 200 mm to 1600 x 1000 mm Certification No: SK01-ZSV-0157 Classification report No: FIRES-CR NURE4, FIRES-CR NURE4 Test report No: FIRES-FR AUNE, FIRES-FR AUNE2 EI 120 (ve ho i o) S Unit weight in KG EI90S, EI120S H/L (mm) ,8 8,6 9,4 10,3 11,1 11,9 12,8 13,6 14,4 16,1 17,8 19,4 21,1 22,8 24,4 27,8 29,5 31, ,6 9,5 10,4 11,3 12,2 13,1 14,1 15,0 15,9 17,7 19,6 21,4 23,2 25,0 26,9 30,5 34,2 36, ,4 10,4 11,4 12,3 13,3 14,3 15,3 16,3 17,3 19,3 21,3 23,2 25,2 27,2 30,1 34,0 36,0 38, ,2 11,3 12,4 13,4 14,5 15,6 16,6 17,7 18,8 20,9 23,1 25,2 27,3 31,4 33,5 37,8 39,9 42, ,0 12,2 13,3 14,5 15,6 16,8 17,9 19,1 20,2 22,5 24,8 29,0 31,3 33,6 35,9 40,5 42,8 45, ,8 13,1 14,3 15,5 16,7 18,0 19,2 20,4 21,6 24,1 28,4 30,9 33,3 35,8 38,2 43,1 45,6 48, ,7 14,0 15,3 16,6 17,9 19,2 20,5 21,8 23,1 25,7 30,2 32,8 35,4 38,0 40,7 45,9 48,5 51, ,5 14,9 16,3 17,7 19,0 20,4 21,8 23,2 24,6 29,2 32,0 34,8 37,5 40,3 43,1 48,6 51,4 54, ,3 15,8 17,2 18,7 20,2 21,6 23,1 24,5 27,9 30,8 33,7 36,6 39,6 42,5 45,4 51,2 54,2 57, ,9 17,6 19,2 20,8 22,4 24,0 25,6 29,1 30,7 34,0 37,2 40,4 43,7 46,9 50,1 56,6 59,8 63, ,6 19,4 21,1 22,9 24,7 28,3 30,1 31,9 33,6 37,2 40,7 44,3 47,8 51,3 54,9 62,0 65,5 69, ,3 21,2 23,1 25,0 28,9 30,8 32,7 34,6 36,6 40,4 44,3 48,2 52,0 55,9 59,7 67,5 71,3 75, ,9 23,0 25,1 27,2 31,1 33,2 35,3 37,4 39,5 43,7 47,8 52,0 56,2 60,3 64,5 72,8 77,0 81,2 Tab. 3: Dimensions and weights of the square fire dampers - dimension range ISO Add 3 kg weight for the versions equipped with a servo EI90S, EI120S H/L (mm) ,8 8,6 9,9 10,4 11,1 11,9 12,8 13,9 15,1 16,3 17,8 19,4 21,1 23,3 25,4 27,8 29,5 31, ,6 9,5 10,9 11,4 12,2 13,1 14,1 15,3 16,7 17,9 19,6 21,4 23,2 25,5 28,0 30,5 34,2 36, ,8 10,9 12,6 13,0 14,0 15,0 16,1 17,5 19,1 20,5 22,4 24,4 26,5 29,1 32,9 35,7 37,8 39, ,3 11,4 13,2 13,7 14,6 15,8 16,8 18,2 19,9 21,3 23,3 25,5 27,6 32,3 35,2 38,2 40,3 42, ,0 12,2 14,0 14,6 15,6 16,8 17,9 19,5 21,2 22,7 24,8 29,0 31,3 34,3 37,3 40,5 42,8 45, ,8 13,1 15,0 15,7 16,7 18,0 19,2 20,8 22,7 24,3 28,4 30,9 33,3 36,5 39,7 43,1 45,6 48, ,7 14,0 16,1 16,8 17,9 19,2 20,5 22,2 24,3 26,0 30,2 32,8 35,4 38,8 42,3 45,9 48,5 51, ,8 15,2 17,5 18,2 19,4 20,8 22,2 24,1 26,3 30,1 32,6 35,5 38,3 41,9 45,7 49,6 52,4 55, ,0 16,6 19,0 19,8 21,2 22,7 24,3 26,2 30,8 32,7 35,4 38,4 41,6 45,5 49,6 53,8 56,9 60, ,1 17,8 20,4 21,2 22,6 24,2 25,9 30,0 32,6 34,7 37,6 40,8 44,1 48,3 52,6 57,2 60,4 63, ,6 19,4 22,2 23,1 24,7 28,3 30,1 32,5 35,3 37,6 40,7 44,3 47,8 52,3 57,1 62,0 65,5 69, ,3 21,2 24,3 25,3 28,9 30,8 32,7 35,3 38,4 40,8 44,3 48,2 52,0 57,0 62,1 67,5 71,3 75, ,9 23,0 26,4 27,5 31,1 33,2 35,3 38,1 41,5 44,1 47,8 52,0 56,2 61,5 67,1 72,8 77,0 81,2 Tab. 4: Dimensions and weights of the square fire dampers - dimension range DIN Add 3 kg weight for the versions equipped with a servo 6

7 W=400 EI90S W=410 EI120S Fig. 4 Manually operated fire damper construction for sizes in table H H+70 L L+65 L Damper Parts Description: 1. Damper blade 2. Casing 3. Release mechanism 4. Electromagnet 5. Terminal switch 6. Inspection (control) opening 7. Servo 8. Thermo-electrical fuse 9. Supply and communication unit Belimo BKN W=400 EI90S W=410 EI120S H H+80 Fig. 5 Manually operated fire damper construction for sizes in tables 3, W=400 EI90S W=410 EI120S Fig. 6 Servo-operated low profile damper construction for sizes in table 6 H H+70 L L+65 L+120 L L+80 1 L H+80 Main dimensions * (mm) * (mm) H (mm) for EI90/120S for EI90S for EI120S Tab. 5: Blade overhang in fully open position * overhang of the open blade including sealing and gap by opening EI90S H/L (mm) ,46 6,14 6,82 7,5 8,18 9,54 10,9 12, ,1 6,85 7,6 8,35 9,1 10,6 12,1 13,6 16, ,08 8, ,74 9, ,4 10, ,7 11,9 Tab. 6: Weights of low-profile fire dampers (Fig. 4 and 6) Add 3 kg weight for the versions equipped with a servo H In addition to dimensions included in Tab. 3, 4 and 5 we also produce fire dampers in dimension ranges according to other European standards. 255 W=400 EI90S W=410 EI120S 145 L L+80 L+140 Fig. 7 Servo-operated fire damper construction for sizes in tables 3, 4 IMOS-Systemair December 2010 TPI 28 7

8 Systemair AB SE Skinnskatteberg, Sweden Tel Fax Systemair December 2010