AXIAL FANS Axis / Tubo OPERATION MANUAL

Transcription

1 TUBO-M AXIS-QA AXIS-Q AXIS-QR AXIS-F AXIS-QRA AXIAL FANS Axis / Tubo OPERATION MANUAL

2 Axis / Tubo CONTENT 3 Introduction 3 General 3 Safety rules 3 Transport and storage requirements 3 Manufacturer's warranty 4 Fan design 4 Delivery set 4 Modifications and options 5 Technical data 10 Mounting and operation guidelines 11 Mounting sequence 11 Installation and connection to power mains 13 Maintenance 14 Warranty card 2

3 BLAUBERG Company is happy to offer your attention the new high-quality axial fans Blauberg Axis and Blauberg Tubo. The solid team of high-qualified professionals with many years of working experience, technological innovations in design and production, high-quality components and materials from the top worldwide producers have become the precondition for the best fan in its class. INTRODUCTION The present operation manual contains technical description, technical data sheets, operation and mounting guidelines, safety precautions and warnings for safe and correct operation of the fan. GENERAL The axial fans Axis, Tubo are not a ready for use product. It is a component unit designed for integration into air conditioning and ventilation systems. The fans, R, A, RA are designed for direct air exhaust. The models are designed for connection to Ø 205 mm up to 645 mm air ducts and the models Tubo-M, Tubo-MZ are designed for connection to Ø 160 mm up to 315 mm air ducts. The fan has IEC Protection Class I and must be grounded. The fans are allowed for operation only after final mounting, that includes installation of protecting devices in compliance with DIN EN ISO (DIN EN ISO 12100) as well as other construction safety equipment. The fan design is regularly improved, so some models can slightly differ from those ones described in this service instruction. SAFETY RULES The fan complies with the requirements according to the EU norms and directives, to the relevant EU-Low Voltage Equipment Directives, EU- Directives on Electromagnetic Compatibility. All operations related to the fan electrical connections, servicing and repair works are allowed only after the fan disconnection from power mains. All mounting and servicing operations are allowed for duly qualified electricians with valid electrical work permit for electric operations at the units up to 1000 V after careful study of the present user's manual. Please follow the safety regulations and working instructions (DIN EN , IEC 364). Make sure the impeller and the casing are not damaged before connecting the fan to power mains. The casing internals must be free of any foreign objects which can damage the impeller blades. Disconnect the fan from power mains prior to any operations related to the fan servicing and repair works. Take measures to prevent contact with the fan to avoid physical damages during the fan step and start-up. Misuse of the product or any unauthorized modification are not allowed. The fan is designed for connection to ac single-phase or ac three-phase power mains, see "Technical Data". The fan is rated for permanent operation during non-stop power supply. Take steps to prevent ingress of smoke, carbon monoxide and other combustion products into the room through open chimney flues or other fire-protection devices. Sufficient air supply must be provided for proper combustion and exhaust of gases through the chimney of fuel burning Axis / Tubo equipment to prevent back drafting. The maximum permitted pressure difference per living units is 4 Pa. The transported air must not contain any dust or other solid impurities, sticky substances or fibrous materials. The fan is not designed for use in an inflammable and explosive medium. The transported medium must not have an aggressive effect on steel at the temperature stated in the tables 1, 3, 5, 7 of the section Technical data. Do not close or block the fan intake or exhaust vent not to disturb the normal air passage. Do not sit on the fan and do not put objects on the fan. Follow the manual guidelines to ensure trouble-free operation and long service life of the product. STORAGE AND TRANSPORTATION RULES Store the delivered product in the manufacturer's original packing box in a dry ventilated premise with the ambient temperature from +5 C up to + 40 C and relative humidity less than 80% at the temperature +25 C. Store the fan in an environment with minimized risk of mechanical damages, temperature and humidity fluctuations. Store the fan inside a room or under a shelter. Transport of the product is allowed by any vehicle in the manufacturer's original packing box. Use hoist machinery for handling and transportation to prevent possible mechanical damages of the product. Fulfil the requirements for transportation of the specified cargo type during cargo-handling operations. Do not expose the product to extremely low or high temperatures. MANUFACTURER'S WARRANTY The fan complies with the requirements according to the EU norms and directives, to the relevant EU-Low Voltage Equipment Directives, EU- Directives on Electromagnetic Compatibility. We hereby declare that the following product complies with the essential protection requirements of Electromagnetic Council Directive 2004/108/ EC, 89/336/EEC and Low Voltage Directive 2006/95/EC, 73/23/EEC and CE-marking Directive 93/68/EEC on the approximation of the laws of the Member States relating to electromagnetic compatibility. This certificate is issued following test carried out on samples of the product referred to above. Assessment of compliance of the product with the requirements relating to electromagnetic compatibility was based on the following standards. The manufacturer hereby warrants normal operation of the fan over the period of 2 years from the retail sale date provided observance of the installation and operation regulations. In case of failure due to faulty equipment during the warranty period the consumer has the right to exchange it. If case of no confirmation of the sale date, the warranty term shall be calculated from the manufacturing date. The replacement is offered by the Seller. The MANUFACTURER shall not be liable for any damage resulting from any misuse of or gross mechanic interference with the fan. Please follow the operation guidelines always.! ATTENTION The product is not allowed for use by children and persons with reduced physical, mental or sensory capacities, without proper practical experience or expertise, unless they are controlled or instructed on the product operation by the person(s) responsible for their safety. Supervise the children and do not let them play with the product. WARNING Do not dispose in domestic waste. The unit contains in part material that can be recycled and in part substances that should not end up as domestic waste. Dispose of the unit once it has reached the end of its working life according to the regulations valid where you are. 3

4 Axis / Tubo FAN DESIGN AXIS-Q / AXIS-QR / AXIS-QA / AXIS-QRA casing cover DELIVERY SET fan - 1 item; operation manual. flange flange MODIFICATIONS AND OPTIONS Fig. 1 terminal block impeller AXIS-Q Fan with a square mounting plate AXIS-QR Fan with a round mounting plate FAN DESIGN AXIS-F DELIVERY SET casing terminal block fan - 1 item; operation manual. impeller Fig. 2 FAN DESIGN TUBO-M / TUBO-MZ DELIVERY SET fan - 1 item; screws and dowels - 4 items; mounting brackets - 2 items; operation manual. casing MODIFICATIONS AND OPTIONS Fig. 3 impeller mounting bracket ТUBO-M Fan made of polymer coated steel ТUBO-MZ Fan made of galvanized steel 4

5 Axis / Tubo TECHNICAL DATA AXIS-Q / AXIS-QR Table 1. Technical data 200 2Е R 200 2Е 250 2Е R 250 2Е 250 4Е R 250 4Е 300 2E R 300 2E 300 4Е R 300 4Е 350 4Е R 350 4Е 400 4Е R 400 4Е Voltage, 50 Hz [V] Power [W] Current [A] 0,26 0,4 0,22 0,66 0,35 0, Max. air flow [m 3 /h] RPM [min -1 ] Noise level, 3 m [dba]** Max. transported air temperature [ C] Ingress Protection Rating IP 24 IP 24 IP 24 IP 24 IP 24 IP X4 IP Е R 450 4Е 500 4Е R 500 4Е 550 4Е R 550 4Е 630 4Е R 630 4Е 630 6Е R 630 6Е 250 2D R 250 2D 250 4D R 250 4D Voltage, 50 Hz [V] Power [W] Current [A] Max. air flow [m 3 /h] RPM [min -1 ] Noise level, 3 m [dba]** Max. transported air temperature [ C] Ingress Protection Rating IP 24 IP 24 IP 24 IP 24 IP 24 IP 24 IP D R 300 2D 300 4D R 300 4D 350 4D R 350 4D 400 4D R 400 4D 450 4D R 450 4D 500 4D R 500 4D 550 4D R 550 4D 630 4D R 630 4D Voltage, 50 Hz [V] Power [W] Current [A] Max. air flow [m 3 /h] RPM [min -1 ] Noise level, 3 m [dba]** Max. transported air temperature [ C] Ingress Protection Rating IP 24 IP 24 IP 24 IP 24 IP 24 IP 24 IP 24 IP 24 * Allowable deviation of the rated voltage: ±10% **Noise level is measured at 3 m distance from the fan connected to the air ducts, in free space. 5

6 Axis / Tubo Table 2. Overall dimensions Type Dimensions [mm] ØD Ød B B1 L Weight [kg] 200 2Е Е Е Е Е Е Е Е Е Е Е Е D D D D D D D D D D Type Dimensions [mm] ØD Ød B1 B2 L Weight [kg] R 200 2Е R 250 2Е R 250 4Е R 300 2Е R 300 4Е R 350 4Е R 400 4Е R 450 4Е R 500 4Е R 550 4Е R 630 4Е R 630 4Е R 250 2D R 250 4D R 300 2D R 300 4D R 350 4D R 400 4D R 450 4D R 500 4D R 550 4D R 630 4D TECHNICAL DATA AXIS-F Table 3. Technical data 200 2Е 250 2Е 250 4Е 300 2Е 300 4Е 350 4Е Voltage, 50 Hz [V] Power [W] Current [A] 0,26 0,4 0,22 0,66 0,35 0,65 Max. air flow [m 3 /h] RPM [min -1 ] Noise level, 3 m [dba]** Max. transported air temperature [ C] Ingress Protection Rating IP X4 IP X4 IP X4 IP X4 IP X4 IP X Е 450 4Е 500 4Е 550 4Е 630 4Е 250 2D Voltage, 50 Hz [V] Power [W] Current [A] Max. air flow [m 3 /h] RPM [min -1 ] Noise level, 3 m [dba]** Max. transported air temperature [ C] Ingress Protection Rating IP X4 IP X4 IP X4 IP X4 IP X4 IP X4 6

7 Axis / Tubo Table 3. Technical data 250 4D 300 2D 300 4D 350 4D 400 4D 450 4D Voltage, 50 Hz [V] Power [W] Current [A] Max. air flow [m 3 /h] RPM [min -1 ] Noise level, 3 m [dba]** Max. transported air temperature [ C] Ingress Protection Rating IP X4 IP X4 IP X4 IP X4 IP X4 IP X4 * Allowable deviation of the rated voltage: ±10% **Noise level is measured at 3 m distance from the fan connected to the air ducts, in free space. Table 4. Overall dimensions Type Dimensions [mm] ØD ØD1 ØD1 Ød B L Weight [kg] 200 2Е Е Е Е Е Е Е Е Е Е Е D D D D D D D Fig. 4 R Fig. 5 Fig. 6 7

8 Axis / Tubo TECHNICAL DATA AXIS-QA / AXIS-QRA Table 5. Technical data A 150 RA 150 A 200 RA 200 A 250 RA 250 A 315 RA 315 Voltage, 50 Hz [V] Power [W] Current [A] Max. air flow [m 3 /h] RPM [min -1 ] Noise level, 3 m [dba]** Max. transported air temperature [ C] Ingress Protection Rating IP 24 IP 24 IP 24 IP 24 * Allowable deviation of the rated voltage: ±10% **Noise level is measured at 3 m distance from the fan connected to the air ducts, in free space. Table 6. Overall dimensions Type Dimensions [mm] ØD Ød B B1 L Weight [kg] A A A A Type Dimensions [mm] Ø ØD1 ØD2 Ød L Weight [kg] RA RA RA RA Fig. 7 Fig. 8 8

9 Axis / Tubo TECHNICAL DATA TUBO-M / TUBO-MZ Table 7. Technical data Tubo-M 150 Tubo-MZ 150 Tubo-M 200 Tubo-MZ 200 Tubo-M 250 Tubo-MZ 250 Tubo-M 315 Tubo-MZ 315 Voltage, 50 Hz [V] Power [W] Current [A] Max. air flow [m 3 /h] RPM [min -1 ] Noise level, 3 m [dba]** Max. transported air temperature [ C] Ingress Protection Rating IP X4 IP X4 IP X4 IP X4 * Allowable deviation of the rated voltage: ±10% **Noise level is measured at 3 m distance from the fan connected to the air ducts, in free space. Table 8. Overall dimensions Type Dimensions [mm] ØD B L L1 L3 Weight [kg] Tubo-M 150 / Tubo-MZ Tubo-M 200 / Tubo-MZ Tubo-M 250 / Tubo-MZ Tubo-M 315 / Tubo-MZ Fig. 9 9

10 Axis / Tubo MOUNTING AND OPERATION GUIDELINES The air motion direction in the system must match the pointer on the fan casing. Install the fan to ensure sufficient and quick access for servicing and repair operations. The fan must be grounded. While mounting protect the fan against water ingress in the following way: 1. Install an outer hood above in case of vertical mounting position, fig. 10. Fig. 10 MOUNTING SEQUENCE AXIS-QA AXIS-QRA Fig. 11 Fig. 12 AXIS-Q AXIS-QR Fig. 19 Fig. 20 Fig. 13 Рис. *** Fig. 14 Fig. 15 Fig. 16 Fig. 21 Fig. 22 Fig. 17 Fig. 18 Fig. 23 Fig

11 Axis / Tubo MOUNTING SEQUENCE AXIS-F MOUNTING SEQUENCE TUBO-M / TUBO-MZ Fig. 25 Fig. 26 Fig. 29 Fig. 30 Fig. 27 Fig. 28 Fig. 31 Fig. 32 Fig. 33 Fig. 34 INSTALLATION AND CONNECTION TO POWER MAINS Connection of the fan to power mains is allowed by a qualified electrician only. The rated electrical parameter are stated on the rating plate. No modifications of internal connections are allowed and will result in void warranty. Connect the fan only to power mains with valid electric standards. The house cabling system must be equipped with an automatic switch at the external input. Connect the fan to power mains through the automatic switch. The contact gap on all poles at least 3 mm. The automatic switch trip current must be in compliance with the fan current consumption, refer Table 1, 3, 5, 7. Install the automatic switch to ensure prompt access. Cut power supply to the fan off by turning the automatic electric switch QF to OFF position (fig.3 5). Take steps to prevent activation of the automatic switch. AXIS-Q AXIS-QR AXIS-F ~230 V 50 Hz Fig 36 ~400 V 50 Hz L N PE QF L N Single-phase fans L1 L2 L3 PE QF L1 L2 L3 X X Fig. 37 Three-phase fans AXIS-QA Fig. 35 The fan wiring diagram is shown in fig Connection sequence of the fan, shown on fig AXIS-QRA TUBO-M / TUBO-MZ ~230 V 50 Hz L N QF L N X PE Fig

12 Axis / Tubo INSTALLATION AND CONNECTION TO POWER MAINS AXIS-Q AXIS-QR Fig. 39 Fig. 40 Fig. 41 Fig. 42 AXIS-F Fig. 43 Рис. Fig. 44 *** Рис. Fig. 45 *** Abb. Fig. 46 *** AXIS-QA AXIS-QRA Fig. 47 Fig. 48 Fig. 49 Fig. 50 TUBO-M / TUBO-MZ Fig. 51 Fig. 52 Fig

13 Axis / Tubo MAINTENANCE Regular technical supervision and maintenance of the fan are required to ensure the product long service life and non-stop operation. Disconnect the fan from power mains prior to any maintenance operations, fig. 54. Do not place the fan in water (fig.55). Maintenance of the fan is required and means cleaning the fan surfaces from dust and dirt. Maintenance includes regular cleaning, control of the impeller, motor, impeller blades. Mounting sequence of the fan is shown on fig Fig. 54 Fig. 55 Clean the impeller blades with a soft cloth or a brush wetted in a mild soap solution. Avoid liquid splashing on the motor. Clean the impeller blades thoroughly at least once in 6 months. Operation recommendations: 1. Clean the fan regularly from dust, dirt and foreign objects. 2. Check all fastening connections periodically. 3. Control generated noise and vibration. High vibration may indicate the bearing wear, sticking of the dirt particles contained in the transported air, the impeller blades wear, loose connection between the fan and the air duct. 4. Check periodically the fastening connections, impeller for possible blade damages, check connection of the fan to the air duct and coating. AXIS-Q AXIS-QR AXIS-QA AXIS-QRA Fig. 56 Fig. 57 Fig. 58 Fig. 59 Fig. 60 Fig. 61 Fig. 62 Fig. 63 AXIS-F TUBO-M / TUBO-MZ Fig. 64 Fig. 65 Fig. 66 Fig

14 WARRANTY CARD BLAUBERG MANUFACTURE DATE SELLER SALES DATE REPRESENTATIVE IN EU Blauberg Ventilatoren GmbH Aidenbachstr. 52a, D München, Germany Axis / Tubo / v.5 (3) / EN