Fusible Link (replaceable) Horizontal Mount
|
|
- Garry Harper
- 5 years ago
- Views:
Transcription
1 Application Model SSFD-50 is a static rated fire damper approved for use in walls and partitions with fire resistance ratings less than hours. This model carries a 2 hour UL fire damper label. UL555 classifies static rated fire dampers for use in HVAC systems that are automatically shut down in the event of fire. SSFD-50 is contructed out of 04 stainless steel. Ratings UL555 Fire Resistance Rating Fire Rating: 2 hours Model SSFD-50 Static Rated Fire Dampers 2 Hour Fire Resistance Rating Construction Standard Optional Frame Material 04SS* - Frame Depth Optional Features Sealed transitions (sleeve required) and sleeves Security Bars 6 in. (94mm) Blade Material 04SS* - Closure Spring Stainless Steel - Fusible Link 65 F (74 C) 22 F or 286 F (00 C) or (4 C) Mounting Vertical Horizontal * in gauges required by UL listing R-7 One piece retaining angles (POC) Transitions (B, B2, C, CO, CR, R) - * These dimension are furnished approximately 4 in. (6mm) undersize. See complete marking on product. UL 555 Classification R7 Model SSFD-50 meets the requirements for fire damper established by: National Fire Protection Association (NFPA Standards 80, 90A & 0) Underwriters Laboratories Standard 555 (Listing #R7) IBC International Building Codes New York City (MEA listing #260-9-M) California State Fire Marshall (Listing #225-98:02) Stainless Steel Closure Spring Fusible Link (replaceable) K side Horizontal Mount Installation All fire damper installations require the use of sleeves, angles and methods described in Greenheck Fire Damper Installation Instructions. Sleeves can be field fabricated or factory furnished as a complete damper/sleeve assembly. Installation instructions available at
2 Factory Sleeve Option SSFD-50 SSFD-50 Fire Dampers are available in factory furnished sleeves. Sleeves are 04 stainless steel and are available in 6 and 20 ga. (mm -.5mm) thicknesses and lengths up to 6 in. (94mm). K dimension specifies location of damper within the sleeve. Minimum is 4 in. (02mm), maximum is L less 4 in. (02mm), which allows for mounting angle installation and duct connection at each end of sleeve. If K dimension is not specified, the damper will be centered in the sleeve. Note: If using access doors, the doors should be installed on the K side of the damper. Sleeve Damper K Damper CL Damper Frame Location L Overall Sleeve Length When sealed option is selected, B transitions will need to be field sealed in the area where duct to sleeve connection is made. Type B with sleeve Type B corner profile
3 Dampers larger than maximum single section size are supplied in 2 or more sections of equal size. If ordered with a factory sleeve, multi-section dampers are factory assembled ready for installation. If ordered without a factory sleeve, multi-section dampers require field assembly. The following chart show minimum and maximum damper sizes. Dimensions are in inches (mm in parentheses). Size Limitations Inches (mm) Vertical Vertical** Horizontal Horizontal** Type A Type B & B2 Minimum Maximum Minimum Maximum 4 x 4 (02 x 02) 4 x 4 (02 x 02) SSFD-50 Type A 48 X 48 (29 X 29) 96 X 48 or 20 x 40 (248 x 29 or 048 x 06) 6 x 6 (94 x 94) 4 X (02 X 76) 4 x (02 x 76) 48 X 42 (29 X 067) 96 x 42 or 20 x 5 (248 x 067 or 048 x 889) 6 x (94 x 787) Maximum Dimensions 2 - Limitations Maximum height is 48 in. (29mm) when width is 96 in. (248mm) or less. 48 in. (29mm) 48 in. (29mm) 48 in. (29mm) 96 in. (248mm) Sizing Data SSFD-50 Type B & B2 Dampers larger than maximum single section size are supplied in 2 or more sections of equal size. If ordered with a factory sleeve, multi-section dampers are factory assembled ready for installation. If ordered without a factory sleeve, multi-section dampers require field assembly. Maximum Dimensions 2 - Limitations Maximum height is 42 in. (067mm) when width is 96 in. (248mm) or less /2 in. Varies /2 in. 42 in. (067mm) 42 in. (067mm) K dim. 48 in. (29mm) 96 in. (248mm) Sleeve Length Varies B2 side view * All multiple section dampers, with B transitions, will include a factory installed sleeve. All dampers with B2 transition will include a factory installed sleeve.
4 SSFD-50 Type B & B2 cont... 5 (27) 2 (584) 27 (686) 4 (02) 6 (52) 24 (60) 28 (7) 5 (27) 7 (78) 25 (65) 29 (77) 6 (52) 8 (20) 26 (660) 0 (762) 7 (78) 9 (229) 27 (686) (787) 8 (20) 0 (254) 28 (7) 2 (8) 9 (229) (279) 29 (77) (88) 0 (254) 2 (05) 0 (762) 4 (864) (279) (0) (787) 6 (94) Type B 2 (05) 4 (56) (0) 5 (8) 2 (8) 7 (940) (88) 8 (965) 4 (56) 6 (406) 4 (864) 9 (99) 5 (8) 8 (457) 5 (889) 40 (06) 6 (406) 9 (48) 6 (94) 4 (04) 7 (42) 20 (508) 7 (940) 42 (067) 8 (457) 2 (5) 8 (965) 44 (8) 9 (48) 22 (559) 20 (508) 2 (584) 9 (99) 45 (4) 40 (06) 46 (68) 2 (5) 24 (60) 4 (04) 47 (94) 22 (559) 26 (660) 42 (067) 48 (29) Sizing Data Type B2 * Dimensions in inches (mm). These dimensions are furnished 4 in. (6mm) undersize. (All H dimensions larger than 4 in. (092mm) are two sections high. The bottom section is a Type A and the top section is a Type B.) SSFD-50 Type CR, CO, C & R Dampers larger than maximum single section size are supplied in 2 or more sections of equal size. If ordered with a factory sleeve, multi-section dampers are factory assembled ready for installation. If ordered without a factory sleeve, multi-section dampers require field assembly. The following chart show minimum and maximum damper sizes. Dimensions are in inches (mm in parentheses). Inches (mm) Vertical Vertical** Horizontal Type CR Type CO & C Type R* Minimum Maximum Minimum Maximum Minimum Maximum 4 (04) 0 (762) X (76 X 76) X (76 X 76) 46 X 4 (68 X 04) 94 X 4 or 8 x 4 (288 x 04 or 2997 x 864) 4 x (864 x 787) 0 (762) 46 (68) 4 (864) * With 2 in. (50mm) offset. Sizes adjust with 0 offset and offset.
5 SSFD-50 Type CR, CO, C & R cont... D*+2 Type CR Maximum Dimensions T ype C T ype CO 4 in. (04mm) 46 in. (68mm) - Limitations 4 in. (04mm) 46 in. (68mm) Type CO D* +2 C, CO, CR transitions are positioned from bottom of sleeve +2 Type CR Type R Type C in. (76mm) min. 4 in. (04mm) in. (76mm) min. 46 in. (68mm) * All multiples section dampers, with transitions, will include a factory installed sleeve. or D* or D* 6 (52) 2 (584) 28 (7) 4 (02) 7 (78) 24 (60) 29 (77) 5 (27) 8 (20) 25 (65) 0 (762) 6 (52) 9 (229) 26 (660) (787) 7 (78) 0 (254) 27 (686) 2 (8) 8 (20) (279) 28 (7) (88) 9 (229) 2 (05) 29 (77) 4 (864) 0 (254) (0) 0 (762) 6 (94) (279) 4 (56) (787) 7 (940) 2 (05) 5 (8) 2 (8) 8 (965) (0) 6 (406) (88) 9 (99) 4 (56) 8 (457) 4 (864) 40 (06) 5 (8) 9 (48) 5 (889) 4 (04) 6 (406) 20 (508) 6 (94) 42 (067) 7 (42) 2 (5) 7 (940) 44 (8) 8 (457) 22 (559) 8 (965) 45 (4) 9 (48) 2 (584) 9 (99) 46 (68) 20 (508) 24 (60) 40 (06) 47 (94) 2 (5) 26 (660) 4 (04) 48 (29) 22 (559) 27 (686) - * Dimensions are inches (mm). These dimensions are furnished approximately 4 in. (6mm) undersize, except round and oval dimensions (D, H, W) are approximately 8 in. (mm) undersize. (All H dimensions larger than single section height are two sections high. Refer to chart.) Copyright 207 Greenheck Fan Corporation SSFD-50 Rev. 9 December 207
Fusible Link (replaceable) Horizontal Mount
Application Model FD-50 is a static rated fire damper approved for use in walls and partitions with fire resistance ratings less than hours. This model carries a /2 hour UL fire damper label. UL 555 classifies
More informationModel FD-350. Static Rated Fire Dampers 3 Hour Fire Resistance Rating. Application. Ratings. Construction Standard Optional.
Application Model FD-50 is a static rated fire damper approved for use in walls and partitions with fire resistance ratings of hours or more. This model carries a hour UL fire damper label. UL555 classifies
More informationModel DFD-150. Dynamic Rated Fire Damper 11/2 Hour Fire Resistance Rating. Application. Ratings. Optional Features
Application Model is approved for use in walls, floors, and partitions with fire resistance ratings less than 3 hours. This model carries a 1 1 2 hour UL fire damper label. UL555 classifies dynamic rated
More informationModel DFD-150. Dynamic Rated Fire Damper 11/2 Hour Fire Resistance Rating. Application. Ratings. Optional Features
Application Model is approved for use in walls, floors, and partitions with fire resistance ratings less than 3 hours. This model carries a 1 1 2 hour UL fire damper label. UL555 classifies dynamic rated
More informationModel DFD-350. Dynamic Rated Fire Damper 3 Hour Fire Resistance Rating. Application. Ratings. Optional Features
Application Model is approved for use in walls, floors, and partitions with fire resistance ratings of hours or more. This model carries a hour UL fire damper label. UL 555 classifies dynamic rated fire
More informationModel DFD-230 Multi-Blade Fire Damper Steel 3V Blades UL555 3 Hour Fire Resistance Rating
Application Model is a multi-blade fire damper with 3V style blades. The has been qualified to 4000 fpm (20.3 m/s) and 10 in. wg (2.5 kpa) for dynamic closure in emergency fire situations. Model may be
More informationModel SMD-302M. Modulating Smoke Damper. Application. Steel Airfoil Blades UL 555S Leakage Class II. Ratings. Size Limitations.
Model Application The is a leakage rated modulating smoke damper with airfoil blades for operational closure in emergency smoke control situations. This model serves the function of both a control damper
More informationModel CFSD-211. Corridor Ceiling FIRE SMOKE DAMPER Steel 3V Blades UL 555S Leakage Class I
Application and Design Model is a combination fire smoke damper that is UL classified to protect corridor ceiling penetrations as required by the Uniform Building Code. This model s operational ratings
More informationSMD-201M. Application. Modulating Smoke Dampers Steel 3V Blades UL 555S Leakage Class I. Ratings. Operational Rating. Size Limitations.
Application Model is a leakage rated modulating smoke damper with 3V style blades. The has been qualified to 2,000 fpm (10.2 m/s) and 6 in. wg (1.5 kpa) for operational closure in emergency smoke control
More informationModel SSFSD-211. Combination Fire Smoke Damper 304 Stainless Steel 3V Blades UL 555S Leakage Class I UL Hour Fire Resistance Rating
R Model Application Model is a 304SS combination fire smoke damper with 3V style blades. The is qualified to 2,000 fpm (10.2 m/s) and 6 in. wg (1.5 kpa). This damper may be installed vertically (with blades
More informationModel FSD-331. Combination Fire Smoke Dampers. Application. Ratings. Features
Application Model is a high performance combination fire smoke damper with Class I leakage. High strength airfoil blades ensure the lowest resistance to airflow in HVAC systems with velocities to 4000
More informationModel FSD-211. Combination FIRE SMOKE DAMPERS Steel 3-V Blades UL 555S Leakage Class I UL Hour Fire Resistance Rating
R APPLICATION Model FSD-211 is a combination fire smoke damper with 3V style blades. The FSD-211 has been qualified to 2000 fpm (10.2 m/s) and 6 in. wg (1.5 kpa) for operation and dynamic closure in emergency
More informationSMD-201. Application. Smoke Dampers Steel 3V Blades UL 555S Leakage Class I. Ratings. Operational Rating. Size Limitations.
Application Model is a leakage rated smoke damper with 3V style blades. The has been qualified to 2,000 fpm (10.2 m/s) and 6 in. wg (1.5 kpa) for operational closure in emergency smoke control situations.
More informationModel SMD-301. Smoke Damper Steel Airfoil Blades UL 555S Leakage Class I. Application. Ratings. Size Limitations. Features
Model Application The is a leakage rated smoke damper with airfoil blades for operational closure in emergency smoke control situations. This model serves the function of both a control damper and smoke
More informationModel FSD-331 Combination Fire Smoke Dampers
R APPLICATION Model is a high performance combination fire smoke damper with class I leakage. High strength airfoil blades ensure the lowest resistance to airflow in HVAC systems with velocities to 4000
More informationModel FSD-211. Application. Combination Fire Smoke Damper Steel 3V Blades UL 555S Leakage Class I UL /2 Hour Fire Resistance Rating.
Application Model is a combination fire smoke damper with 3V style blades. This model is designed for operation and dynamic closure in emergency fire smoke situations. It is rated for airflow and leakage
More informationModel FSD-212. Combination FIRE SMOKE DAMPERS
R APPLICATION Model is a combination fire smoke damper with 3V style blades. The has been qualified to 2000 fpm (10.2 m/s) and 6 in. wg (1.5 kpa) for operation and dynamic closure in emergency fire smoke
More informationHCD-135. Industrial Control Damper. Application and Design. Ratings (see page 2 and 3 for specific limitations) Standard Construction.
Application and Design Model is a heavy duty industrial control damper with a flanged frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety
More informationFire Dampers Catalogue
Fire s Catalogue DUCT VENTILATION AIR CONDITIONING Co. (W.L.L.) CRFD - Type A, B, CR & CO Rectangular, Round & Flat Oval UL 555 Classified 2013 For Use in Static & Dynamic Systems 3 Hour Rating Made in
More informationHCD-230 Industrial Control Damper
Application and Design Model is a heavy duty industrial control damper with a flanged frame. It is designed to control airflow and provide shut off in HVAC or industrial process control systems. A variety
More informationLife Safety Dampers. Fire Combination Fire Smoke Smoke Ceiling Radiation
Life Safety Fire Combination Fire Smoke Smoke Ceiling Radiation June 2018 Table of Contents Introduction......................................... 3- Fire....................................... 5-19 Application...................................................
More informationCURTAIN TYPE FIRE DAMPER
MODEL: IBD-2 / IBD-2H STANDARD CONSTRUCTION FIRE RATING UL 555 1-1/2 hours UL classification damper SS: 4 hours rating classification damper NOTES Damper s dimension is usually about 10 mm smaller than
More informationtable of contents PRODUCT SUMMARY 2
P R O D U C T C A T A L O G introduction Aire Technologies, Inc. is proud to present our line of air management and life safety products for integration into your HVAC system design, fabrication, or installation.
More informationMODEL 151B FIRE DAMPER
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Stock ID: IOM-151B January, 2003 2003 Miami Tech Inc., Inc. Miami, FL Miami Tech T Inc. MODEL 151B FIRE INSTALLATION INSTRUCTIONS The City of New York 909-89-SM California
More informationFSD60, FSD60LP CoMBINAtIoN FIRe AND SMoKe DAMPeR
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 FSD60, FSD60LP CoMINAtIoN FIRe AND SMoKe DAMPeR 1 1 /2 HoUR UL555 RAteD, UL555S LeAKAge CLASS 1 APPLICAtIoN Ruskin FSD60 Series
More informationFSD36, FSD36LP COMBINATION FIRE AND SMOKE DAMPER 1 1 /2 HOUR UL555 RATED, UL555S LEAKAGE CLASS 2
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FAX (816) 765-8955 FSD36, FSD36LP COMINATION FIRE AND SMOKE DAMPER 1 1 /2 HOUR UL555 RATED, UL555S LEAKAGE CLASS 2 APPLICATION Ruskin FSD36 Series
More informationLife Safety Dampers - International. Fire Combination Fire Smoke Smoke Ceiling Radiation
Life Safety - International Fire Combination Fire Smoke Smoke Ceiling Radiation June 2018 Fire Greenheck s employees are deeply committed to being easy to do business with anywhere in the world. As an
More informationModel VCD-20V. 3V Vertical Control Damper. Application and Design. Ratings (See page 4 for specific limitations) Flange Options.
Application and Design The series is a vertical blade general purpose damper for application as an automatic control or manual balancing damper. This model is intended for application in low to medium
More informationMotorized Fire Dampers
Model : OMFD-611 (Fusible link and spring return actuator) GI steel sheet construction In accordance with UL555 & UL555S suitable for installation in walls and partitions having rating 2 Hrs. Static and
More informationWD-300 Series. Backdraft Damper Vertical Mount - Horizontal Airflow. Application and Design. Ratings. Frame Styles. Size Limitations.
Application and Design The WD300 series dampers are designed to prevent reverse airflow in horizontal exhaust applications. The WD300 features a pressure sensitive blade design that opens and remains open
More informationModel VCD-18. Ratings. Blade Operation. Size Limitations. Features & Options
Application and Design The series is a general purpose, low leakage control damper intended for application in low pressure and velocity systems. atings Pressure: 2 in. wg (.5 kpa) - pressure differential.
More informationAMD-42V Air Measuring Station with VCD-42V Control Damper
Application and Design Construction Standard Optional Frame Material Galvanized Steel - Frame Material Thickness 16 ga. (1.5mm) 12 ga. (2.7mm) 14 ga. (2mm) Frame Type 5 in. x 1 in. hat channel - Blade
More informationAMD-42 Air Measuring Station with VCD-42 Control Damper
Application and Design W x H Construction Standard Optional Frame Material Galvanized Steel - Frame Material Thickness External Minimum Size 16 ga. (1.5mm) Internal Single Section Maximum Size Multiple
More informationModel VCD-20. Control Damper. Application. 3V Blade. Ratings. Flange Options. Size Limitations. Blade Operation. Features and Options
Application The series is a general purpose control damper for applications as an automatic control or manual balancing damper with low to medium pressure and velocity systems. A wide range of electric
More informationModel VCD-20 3V CONTROL DAMPER
R Application and Design The series is a ruggedly built general purpose damper for application as an automatic control or manual balancing damper. This model is intended for application in low to medium
More informationInsulated Control Damper. 1/2 in. (13mm) 1/2 in. (13mm) 12 x 12 (305 x 305) 8 x 12 (203 x in. W x 120 in. H (3658mm x 3048mm) 5 in.
R Application and Design The is a low leakage thermally insulated damper with extruded airfoil blades. features thermally broken frame and blade to eliminate the transfer of heat or cold penetration and
More informationDynamic & Static Rated Fire Dampers, Ceiling Radiation Dampers. UL Classified High Free Area Minimal Pressure Drop
Dynamic & Static Rated Fire Dampers, Ceiling Radiation Dampers UL Classified High Free Area Minimal Pressure Drop December 2005 Volume 21 Dynamic Fire Dampers & Static Rated Fire Dampers, Ceiling Radiation
More informationFire, Smoke, and Combination Fire Smoke Dampers
Fire, Smoke, and Combination Fire Smoke Dampers Installation/Configuration Fire Dampers Smoke Dampers Agenda Combination Fire/Smoke Dampers Operational Test/Inspection Periodic Test/Maintenance Damper
More informationAMD-33. Air Measuring Station with VCD-33 Control Damper. Application and Design. Features & Control Options
Application and Design The combines the functionality of an accurate airflow measuring station and a low leakage control damper into one compact assembly that both measures and regulates airflow volumes
More informationWD-200 Series. Model WD-220 Flange Opposite Motor. Model WD-210 Flange on Motor Side. Model WD-200 No Flange. Motorized Backdraft Damper.
Application The WD200 series are electrically motorized backdraft dampers that open when energized and spring return close when deenergized. The WD200 series are for horizontal or vertical mounting. Primary
More informationBaked Enamel, Epoxy, Hi Pro Polyester, Industrial Epoxy, Kynar/Hylar (70%) Permatector. Single or Reverse Flange 8 x 6 (203 x 178)
Application and Design The is an extremely low leakage damper designed to meet the highest standards established for commercial control dampers. The is intended for application in medium to high pressure
More informationAMD-33 Air Measuring Station with VCD-33 Control Damper
Application and Design Construction Standard Optional Frame Material Galvanized Steel - Frame Material Thickness 16 ga. (1.5mm) 12 ga. (2.7mm) Frame Type 5 in. x 1 in. hat channel - Blade Material Galvanized
More informationMULTI-BLADE FIRE DAMPERS
MODL D1201-DOW (1 1/2 HR.) OUT OF WALL DYNAMIC FIR DAMPR AIRFOIL BLAD DUCTD BOTH SIDS D1201-DOW is an "out of wall" (vertical mount) or "out of floor" (horizontal mount) high performance dynamic fire damper
More informationVCD-23. Flange Options. Size Limitations
Application and Design The series is a ruggedly built low leakage control damper intended for application in low to medium pressure and velocity systems. A wide range of electric and pneumatic actuators
More informationModel SEVCD-33. Low Leakage Airfoil Control Damper. Application and Design. Ratings (See page 3 for specific limitations) Blade Operation
Application and Design The is a severe environment 316SS ultra low leakage control damper with rugged stainless steel airfoil blades designed to meet the highest standards established for commercial control
More informationThermal Isolation Break. Frame Type Channel Quick Connect Single or Reverse Flange Blade Action Parallel Opposed Parallel Opposed Parallel Opposed
Application The is a low leakage thermally insulated damper with extruded airfoil blades. features broken blade which minimized the transfer of thermal energy and reduce condensation. It s also IECC (International
More informationAMD-42-TD. Thermal Dispersion Air Measuring Station with VCD-42 Control Damper. Application and Design. Ratings. Features and Control Options
Application and Design Thermal Dispersion Air Measuring Station with VCD-42 Control Damper The combines the functionality of a highly accurate thermal dispersion airflow measuring station and a low leakage
More informationMULTI-BLADE FIRE DAMPERS
MULTI-BLAD FIR DAMPRS MODLS 1201-MDG & 1201-MDS MULTI-BLAD MARIN FIR DAMPRS AIRFOIL BLAD LOW LAKAG Model Series 1201-MDG and 1201-MDS are Multi-Blade Low Leakage Fire Dampers for use in marine applications
More informationModel VCD-34. Low Leakage Insulated Airfoil CONTROL DAMPER. Ratings (See page 3 for specific limitations) Flange Options.
Application and Design The Series is a ruggedly built low leakage control damper with thermally insulated blades. The is intended for application in medium pressure and velocity systems. This model also
More informationModel VCD-40. Extruded Airfoil Blade Control Damper Narrowline Frame Construction. Application. Ratings. Flange Options.
Model Application The is a low leakage high performance control damper with extruded aluminum airfoil blades. Blades are completely contained within the frame allowing the damper to be directly mounted
More informationInsulated Control Damper. 12 x 7 (305 x 178) 8 x 7 (203 x 178)
R Application and Design The is a low leakage thermally insulated damper with extruded airfoil blades. features thermally broken blade to eliminate the transfer of heat or cold penetration and reduced
More informationVCD-23 Low Leakage CONTROL DAMPER
Application and Design The series is a ruggedly built low leakage control damper intended for application in low to medium pressure and velocity systems. A wide range of electric actuators are available.
More informationInstallation, Operation and Maintenance Instructions
Document Number 474094 CRD-1WT Ceiling Radiation for Wood Truss Application Installation, Operation and Maintenance Instructions Receiving and Handling Upon receiving dampers, check for both obvious and
More informationSD-1250 and SD-1600 Series Smoke Dampers
SD-1250 and SD-1600 Series Smoke Dampers Product Bulletin Code No. LIT-1201592 Issued January 30, 2014 Supersedes October 14, 2013 Johnson Controls provides a leakage-rated damper for life safety smoke
More informationVCD-43V. Vertical Airfoil Blade Control Damper. Application and Design. Ratings. Size Limitations. Features and Options: Pressure:
Application and Design is a low leakage damper with vertical blade orientation designed to meet the highest standards established for commercial control dampers. The is intended for application in medium
More informationInsulated Control Damper. 1/2 in. (13mm) 1/2 in. (13mm) 12 x 12 (305 x 305) 8 x 12 (203 x 305) 5 in. (127mm) Parallel
Application and Design The is a low leakage thermally insulated damper with extruded airfoil blades. features thermally broken frame and blade to eliminate the transfer of heat or cold penetration and
More informationModel VCD-43 Extruded Airfoil Blade Control Damper
Application and Design The is an extremely low leakage damper designed to meet the highest standards established for commercial control dampers. The is intended for application in medium to high pressure
More informationSmoke Dampers. Installation Instructions
Smoke Dampers Installation Instructions Installation Details 1. Dampers should be installed to provide proper operation and performance. They should be installed to permit them to maintain their shape
More informationAMD-23-TD. Thermal Dispersion Air Measuring Station with VCD-23 Control Damper. Application. Ratings. Features and Options
Application Thermal Dispersion Air Measuring Station with VCD-23 Control Damper The combines the functionality of a highly accurate thermal dispersion airflow measuring station and a low leakage control
More informationInstallation, Operation and Maintenance Manual
Document 461338 SMOKE DAMPERS SMD-XXX, SMD-XXXEF, SMD-XXXM, SMD-XXXV, SESMD-XXX, SSSMD-XXX, SMDR-XXX, SESMDR-XXX, and SSSMDR-XXX Series Leakage Rated Smoke Dampers Vertical and Horizontal Mount Installation,
More informationCEILING DAMPERS GENERAL PRODUCT OVERVIEW CEILING DAMPERS MODELS 0716, , 0714 & 0722 FOR SQUARE, RECTANGULAR OR ROUND DUCTS
GENERAL PRODUCT OVERVIE Since 97, Nailor Industries has been committed to the innovation and development of life safety products such as the 0700 Series Ceiling Dampers. This commitment has helped foster
More informationVCD-23. Low Leakage CONTROL DAMPER
Application and Design The series is a ruggedly built low leakage control damper intended for application in low to medium pressure and velocity systems. A wide range of electric and pneumatic actuators
More informationModel VCD-33. Low Leakage Airfoil CONTROL DAMPER. Flange Options. Blade Operation. Size Limitations
Application and Design The series is an ultra low leakage damper with rugged steel airfoil blades designed to meet the highest standards established for commercial control dampers. The airfoil shape reduces
More informationB. Fabricate in accordance with ASHRAE handbooks and SMACNA duct manuals. A. Submit in accordance with Division-1 and Section
SECTION 15910 DUCT ACCESSORIES PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract including General and Supplementary Conditions, Division-1 Specification Sections,
More informationFBV-43. Vertical Face & Bypass Control Damper Ultra Low Leakage Aluminum Frame Construction. Application and Design. Size Limitations.
Application and Design The is a vertical style face and bypass low leakage damper. This model is intended for application in medium to high pressure and velocity systems. Smooth profile extruded aluminum
More informationThermal Isolation. Break
Application and Design The is a low leakage thermally insulated damper with extruded airfoil blades. features thermally broken frame and blade will minimize the transfer of thermal energy and reduces condensation.it
More informationDynamic & Static Rated Fire Dampers, Ceiling Radiation Dampers. UL Classified High Free Area Minimal Pressure Drop
Dynamic & Static Rated Fire Dampers, Ceiling Radiation Dampers UL Classified High Free Area Minimal Pressure Drop June 2008 Fire Dampers, Ceiling Radiation Dampers The Greenheck Difference What makes Greenheck
More informationModel FD Static Curtain Fire Damper 1-½ or 3 Hour, UL555 Listed
Tag: Project: Engineer: Contractor: Location: ate: pplication: rchitect: Submitted by: The NC model F fire damper utilizes a curtain style blade to prevent the spread of fire through a penetration in a
More informationFSD60, FSD60LP COMBINATION FIRE AND SMOKE DAMPER 1 1 /2 HOUR UL555 RATED, UL555S LEAKAGE CLASS 1
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FX (816) 765-8955 FSD60, FSD60LP COMINTION FIRE ND SMOKE DMPER 1 1 /2 HOUR UL555 RTED, UL555S LEKGE CLSS 1 PPLICTION Ruskin FSD60 Series ultra
More informationModel FDD Dynamic Curtain Fire Damper 1-½ or 3 Hour, UL555 Listed
Tag: Project: Engineer: Contractor: Location: ate: pplication: rchitect: Submitted by: The NC model F fire damper utilizes a curtain style blade to prevent the spread of fire through a penetration in a
More informationSMOKE DAMPER - CLASS F MODEL BMSD
UL CLASSIFIED DAMPERS SMOKE DAMPER - BMSD SERIES STANDARD CONSTRUCTION Standards: Designed and tested in accordance with UL555S. Meets NFPA 90A and SMACNA requirements for fire & smoke dampers. Application:
More informationRECEIVING AND HANDLING INSTALLATION SUPPLEMENTS WARRANTY SAFETY WARNING:
Part #461336 Installation,Operation and Maintenance Instructions for FSD-XXX, DFD-XXX,DFDTF-XXX CFSD-XXX,SEDFD-XXX, SEFSD-XXX, IMO-XXX, AND SSFSD-XXX SERIES 1 1 2 and 3 Hour Fire & Combination Fire Smoke
More informationSMOKE DAMPERS SMOKE DAMPERS SMOKE DAMPERS
SMOKE DAMPERS 96 97 SD SERIES SD for Use in Dynamic Systems Types Galvanized Steel Construction as Standard.. Sleeve Type, Model: SD - 0-00. Circular Type, Model: SD - 50-00. Oval Type, Model: SD - 60-00
More informationCURTAIN FIRE DAMPERS GENERAL PRODUCT OVERVIEW
CURTAIN FIRE AMPERS GENERAL PRUCT VERVIEW Since 1971, Nailor Industries, Inc. fire dampers have been a critical component of HVAC systems in commercial and industrial buildings. As an industry leader,
More informationCOMBINATION FIRE/SMOKE DAMPER - CLASS F MODEL BMFSD (3 HR) / MODEL BEMFSD (1½ HR)
UL CLASSIFIED DAMPERS COMBINED FIRE/SMOKE DAMPER - BMFSD SERIES STANDARD CONSTRUCTION Standards: Designed and tested in accordance with UL555 & UL555S. Meets NFPA 90A and SMACNA requirements for fire &
More informationAMCA International. Guide for Commissioning and Periodic Performance Testing of Fire, Smoke and Other Life Safety Related Dampers
AMCA International Guide for Commissioning and Periodic Performance Testing of Fire, Smoke and Other Life Safety Related Dampers AIR MOVEMENT AND CONTROL ASSOCIATION INTERNATIONAL, INC. The International
More informationFSD36, FSD36LP COMBINATION FIRE AND SMOKE DAMPER
3900 Dr. Greaves Rd. Kansas City, MO 64030 (816) 761-7476 FX (816) 765-8955 FSD36, FSD36LP COMINTION FIRE ND SMOKE DMPER 1 1 /2 HOUR UL555 RTED, UL555S LEKGE CLSS 2 PPLICTION Ruskin FSD36 Series low leakage
More informationPart # Installation,Operation and Maintenance Instructions
Part #461336 Installation,Operation and Maintenance Instructions for FSD-xxX, DFD-XXX, DFDTF-XXX CFSD-XXX, SEDFD-XXX, SEFSD-XXX, IMO-XXX, and SSFSD-XXX Series 1 1 2 and 3 Hour Fire & Combination Fire Smoke
More informationAir Measuring Products. AMS Thermal Dispersion Pressure Differential
Air Measuring Products AMS Thermal Dispersion Pressure Differential August 2014 1 Airflow Measuring Technologies Greenheck airflow measuring products are available with either differential pressure based
More informationHVAC Control & Balancing Dampers
HVAC Control & Balancing Dampers Models VCD, MBD and RBD Selection Construction Performance H* W* 1June 2017 Design and Construction Features Bearing Shaft Extension Jamb Seal Commercial Control Dampers
More informationAIR DUCT ACCESSORIES
SECTION 23 33 00 AIR DUCT ACCESSORIES PART 1 GENERAL 1.1 SUMMARY A. Work included: 1. Sheet Metal Materials 2. Backdraft Dampers 3. Dampers 4. Concealed Damper Hardware 5. Access Doors 6. Duct Test Holes
More informationCFSD Series. Product Description
COMBINATION FIRE AND SMOKE DAMPER 1-1/2 HR LEAKAGE RESISTANCE CLASS II 250 O F FILE NO: R22165 Product Description Combination Fire / Smoke dampers provide an automatic means of localizing areas of smoke
More informationBC 03. Fire Dampers FD-GB-30-AS LISTED
BC 03 FD-GB-30-AS LIFE SAFETY DAMPERS FD-GB-20/21/30/31 Fire Damper Fire Rating : 1-1/2 Hrs /3 Hrs. Fire Damper Application are required by the International Uniform Building Code to maintain the required
More informationNobody delivers dampers and louvers faster!
USKIN EXPRESS Nobody delivers dampers and louvers faster! R ISO9001 CERTIFIED www.ruskin.com DAMPERS AND LOUVERS Specified by Many Equaled by None We re there when you need us. Guaranteed! At Ruskin, we
More informationCentrifugal Cabinet Fans Model BDF. Belt Drive Duct Fan
Centrifugal Cabinet s BDF Belt Drive Duct July 007 BDF Belt Drive Duct s Greenheck s Belt Drive Duct s, BDF, provide the industry s best performance and durability. BDF is carefully engineered for efficiency
More informationPropeller Hooded Roof Fans
Propeller Hooded Roof Fans Series A - Model AE and AS Exhaust and Supply Fans August 8 Model AE and AS Propeller Fans Greenheck s models AE (axial exhaust) and AS (axial supply) spun aluminum direct drive
More informationInstallation, Operation and Maintenance Manual
Installation, Operation and Maintenance Manual Document 483514 SMOKE DAMPERS SMD-XXX and SMDR-XXX Series Leakage Rated Smoke Dampers Vertical and Horizontal Mount Please read and save these instructions
More informationModel ABV Pressure Independent Automatic Balancing Valve. Application: Standard Construction: Performance: Configurations Available:
Model ABV Tag: Project: Location: Date: Engineer: Contractor: Architect: Submitted by: Application: The ABV Automatic maintains a constant airflow volume in HVAC applications. The highly engineered damper
More informationStandard Installation Fire/Smoke Damper Models: FR1, FR2 Smoke Damper Models: SR1, SR2
Reprinted Feb 2013 APPLICATION These dynamically rated fire/smoke and smoke dampers are intended to restrict the passage of smoke. The dynamically rated fire/smoke dampers are also intended to restrict
More informationMODEL 8682 SUREFLOW ADAPTIVE OFFSET CONTROLLER
MODEL 8682 SUREFLOW ADAPTIVE OFFSET CONTROLLER INSTALLATION INSTRUCTIONS WARNING: The Model 8682 Adaptive Offset Controller must be wired to 24 VAC only. Wiring the unit to 110 VAC will cause serious unit
More informationAir Measuring Products AMD AMS IAQ
Air Measuring Products AMD AMS IAQ January 1 2012 Air Measuring Products Why is outside air measurement important? There are many significant benefits to monitoring outside air volumes. By measuring the
More informationCentrifugal Cabinet Fans Model BCF Belt Drive Low-Profile
Centrifugal Cabinet s BCF Belt Drive Low-Profile May 2007 BCF Belt Drive Cabinet s Greenheck belt drive low-profile cabinet fans, BCF, are designed for efficiency and reliability in supply, exhaust or
More informationInstallation, Operation, and Maintenance Manual. Automatic Fire Damper
Installation, Operation, and Maintenance Manual Automatic Fire Damper Part # 458295 Designed to close in fire situations. Reset by activating the reset switch. UL Listed Constructed in Accordance with
More informationProduct Development and Testing An AMCA Registered Laboratory LJ Airflow: Static Pressure: Temperature: To 80,000 CFM To 50" wg To 600 F Bradner Ohio Test Facility Floor Plan I Approved to conduct performance
More informationDocument number AMS & AMD Damper Series for Honeywell Spyder Controller Installation, Operation, and Maintenance Instructions
Document number 480938 AMS & AMD Damper Series for Honeywell Spyder Controller Installation, Operation, and Maintenance Instructions Use this manual when AMS and AMD series dampers were purchased prior
More informationCEILING & INLINE/CABINET VENTILATORS
Twin City Fan INDUSTRIAL PROCESS AND COMMERCIAL VENTILATION SYSTEMS CEILING & INLINE/CABINET VENTILATORS T-Series TL-Series CATALOG 4600 MARCH 2018 CEILING & INLINE VENTILATORS OVERVIEW T I TL T-Series
More informationTURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS. T-Series TL-Series
TURNING AIR INTO SOLUTIONS. CEILING & INLINE/CABINET VENTILATORS T-Series TL-Series CATALOG 4600 March 2018 CEILING & INLINE VENTILATORS Overview T I TL Twin City Fan & Blower s T-Series Ceiling and TL-Series
More informationStandard Installation Combination Fire/Smoke Damper Models: FS1(SS), FS2(SS) Fire Damper Models: MD19(SS)
Standard Installation Combination Fire/Smoke Damper Models: FS1(SS), FS2(SS) Fire Damper Models: MD19(SS) Page 1 of 6 APPLICATION These dynamically rated fire/smoke and fire s are intended to restrict
More informationUniversity of Delaware
SECTION 23 36 00 _ SUMMARY PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Constant/Variable volume supply terminal units. 2. Fan powered terminal units. 3. Exhaust valves B. Related Sections: Section
More informationCentrifugal Roof Supply Fans Models RSF and RSFP. Forward Curved
Centrifugal Roof Supply Fans Models and Forward Curved April 2008 Centrifugal Filtered Roof Supply Fan When you buy a Greenheck model or, you receive a fan with the industry s best performance and durability
More information