A Complete Piping System Solutions Company. Electrofusion Tools Catalogue. Brand
|
|
|
- Harold Whitehead
- 5 years ago
- Views:
Transcription
1 A Complete Piping System Solutions Company Catalogue
2 Electrofusion Machine Dimensions and Specifications and KWS 500 Welding unit (8V-48V fittings to 710 mm) Mode: Manual and Barcode Data Logging: up to2040 welds Size: 25 cm X 37 cm Weight: 20 kg KWS500BSPNPDCCHS Supply = 230V With Barcode Scanner No. Parameters Description Specification Range A Input Operating Temperature Mains Voltage Supply Current Frequency Power Factor Supply Power Recommended Generator B Output Controled Welding Voltage Welding Power Welding Current C General Features Manual Operations Data Input Fusion Temperature Compensation Environmental Protection Type Electrical Protection Display type Length of connector cableoutpur Cable Length of mains cable - Input Cable Standard -10 to + 50 deg C Volts AC 15 Amp AC (Max) 40 to 70 Hz 0.15 to W (Max) 5 kva 8-48 V AC 8 to 3120 VA 1 to 65 Amp AC (100 Amp short term) Possible Barcode Scanner Default in Automatic mode IP65 Class 1 Earthed 20 Character x 4 Line with Backlight & High contrast 3 Meters (Standard) 4 Meters (Standard) ISO :2008 Output Leads mm terminals (4.7 mm optional) Size: 3 m or 5 m long Weight: 1.3 kg Length = 3m Length = 3m Right angle plug Length = 5m Fitting Terminal Adapters (Pair) Size: 6 cm X 1 cm diameter Weight: 0.1 kg Pin = 4.0 mm & Hole = 4.7 mm Pin = 4.7 mm & Hole = 4.0 mm
3 Multi Alignment (Plier) Clamp, 2 way, 32 mm MULTICLAMP20-32 Sizes (mm) = 20, 25, 32 Supplied with Dia 20 liners Multi Alignment Clamp, Variable, 2 way, 63 mm VARICLAMPD16-63MM Sizes (mm) = 16,20,25,32,40,50,63 Multi Alignment Clamp, 2 way MAC2W MAC2W MAC2W Size = 63cm X 90cm X 125cm Size = 75cm X 90cm X 110cm Size = 63cm X 90cm X 125cm X 180cm Shells of Multi Alignment Clamp (Set of 4) LINERS90-63 LINERS LINERS LINERS Size (mm) = 90/63 Size (mm) = 110/75 Size (mm) = 110/90 Size (mm) = 125/90 Multi Alignment Clamp, 3 way, 180 mm MAC3W Sizes (mm) = 63, 90, 125, 180 (Upgrade from 2 Way) Shells of Multi Alignment Clamp EFRAC125-75LCAST EFRAC LCAST EFRAC LCAST EFRAC LCAST EFRAC125-63LCAST EFRAC180-90LCAST EFRAC LCAST EFRAC LCAST Size (mm) = 125/75 Size (mm) = 180/110 Size (mm) = 180/140 Size (mm) = 180/160 Size (mm) = 125/63 Size (mm) = 180/90 Size (mm) = 180/125 Size (mm) = 180/180 Note : Used for straight connections as well as elbows of any angle between 1 to 90 as well as branch (tee) connections.
4 Squeeze Off Tools, Manual SQUEEZETOOL16T32 Sizes (mm) = 16 to 32 SQUEEZETOOL20T63 Sizes (mm) = 20 to 63, SDR 11 SQUEEZETOOL63T125 Sizes (mm) = 63 to 125, with indexing for SDR 11/17.6 Squeeze Off Tools, Hydraulic HYDSQUEEZER63180 Sizes (mm) = 63 to 180, with indexing for SDR 11/17.6 Top Load Clamps (Saddle Clamps) - Clamp Load - 1kN TLC3250 Sizes (mm) = SDR 11/17.6 Note : With indexed calibrated spring load assuring the exact specified top load Top Load Clamps (Saddle Clamps) - Clamp Load kn TLCLAMPDIA63-315F Sizes (mm) = SDR 11/17.6 Note : With indexed calibrated spring load assuring the exact specified top load 500 mm Saddle Clamp, Strap Style - Clamp Load kn STRAPLOCLAMP Sizes (mm) = 63 to 315 Note : With indexed calibrated spring load assuring the exact specified top load
5 Rotary Pipe Cutter - Roller Wheel ROTPIPECUTER6T67 Sizes (mm) = 6 to 63 ROTARYCUTTER2063 Sizes (mm) = 20 to 63 ROTARYCUTTER50125 Sizes (mm) = 50 to 125 Pipe Cutter, Ratchet RATCHETCUTTER0-63 Sizes (mm) = 0 to 63 RATCHETCUTTER2032 Sizes (mm) = 20 to 32 RATCHETCUTTER2063 Sizes (mm) = 20 to 63 Eclipse Saw ECLIPSESAW Sizes (mm) = Guillotine Cutters GUILLOTINECUTER125 Size (mm) = Up to 125 SDR11 GUILLOTINECUTER225 Size (mm) = Up to 225 SDR11 GUILLOTINECUTER315 Size (mm) = Up to 315 SDR17 Hand Scrapper, Manual HANDSCRAPR inch Hand Scrapper HANDSCRAPRBLAD inch Hand Scrapper (Imported)
6 Tapping Tee Cutter Key ALLENKEYTTC8MM 8mm for EF Tapping Tee 32X20 ALLENKEYTTC12MM 12mm for EF Tapping Tee Dia mm Drilling Tool For Branch Saddle BSDRILLINGTOOL050 Size = 1/2" BSDRILLINGTOOL075 Size = 3/4" BSDRILLINGTOOL100 Size = 1" Purge Tool PTASSEMBLYD32F Size (mm) = D 32 PTASSEMBLYD63F Size (mm) = D 63 Clamp For Meter Box Adapter MBA25CHIMTACLAMP Sizes (mm) = SDR 11/17.6 MBA32CHIMTACLAMP Sizes (mm) = 32 SDR 11/17.6 Meter Box Adapter Terminal Lead MBATERMINALLEAD4.7 Pin = 4.7mm
7 KPSL/EF TOOLS/REV02/JULY17 KIMPLAS LIMITED
Caldervale Technology Limited. Full End Users Product Catalogue 2013
Caldervale Technology Limited Full End Users Product Catalogue 2013 Bretfield Court, Bretton Street, Dewsbury, United Kingdom WF12 9DB Tel +44 (0)1924 469571 Fax +44 (0)1924 460951 www.caldertech.com 1
Equipment and Tooling Product Guide
Equipment and Tooling Product Guide Fusion Group Fusion Group is a multinational company with its headquarters and principal manufacturing site located in Chesterfield, England. When you choose Fusion
Precision is Central.
Precision is Central. As experts in pipe joining solutions, we know precision is vital to every fitting and how they are fused. We offer the most complete range of conventional fusion fittings, injection
Plasson Solutions for Large Bore Pipes
Plasson Solutions for Large Bore Pipes Innovative Design Simpler Installation Plasson Quality and Reliability Plasson Large Bore PE Fitting Systems The use of PE has become well established in pipeline
EQUIPMENT TRAINING CONSULTING
EQUIPMENT TRAINING CONSULTING Worldpoly experience, quality and service For over 50 years, Worldpoly has been heavily involved in the polyethylene pipe industry as a manufacturer of pipe and fittings,
large diameter ElectroFusion fittings & tools for large diameter pipes
large diameter ElectroFusion fittings & tools for large diameter pipes Page 2 Couplers for Large Diameter Pipes Couplers PN10 and PN16 Why use Large Diameter ElectroFusion Couplers Narrow trenches and
Machines & Tooling. Catalogue 2018
Global Presence - Local Commitment PE Welding Technology Made in Germany Machines & Tooling Catalogue 2018 Plastic Systems source tools and machinery from a range of quality manufacturers to provide the
Electrofusion fittings
Systems Electrofusion fittings For gas, water and wastewater applications June 2018 Systems Maximum fusion integrity for pipeline longevity With 50 years expertise in the innovation, design and manufacture
Ritmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite The information and photos in this publication are not binding and RITMO S.P.A. is free to make any alterations without prior notice. INDEX BUTT FUSION
MUELLER GAS. Shur StopTM Unit 812 PE Line Stopping. System 8" 12" SDR Reliable Connections. General Information 2
operating Instructions manual MUELLER GAS TAble of contents PAGE TM Unit 812 PE Line Stopping General Information 2 Equipment, Parts and Dimensions 3-5 Operating Instructions 6-12 Troubleshooting and Storage
.09 3.1.0 1.1 1.44 1.71 1.73 1 5 1-70-3.70 1 HOSE ADAPTORS 0.58 0.1 0.70 0.73 0.83 0.85 0.95 0.93 1.03 1.41 1.1 1.71 1.98.0..3.0 3.08 1.3 1.54 0.89 0.91 1.07 1.4 1.7 1.9 1.17.31.30 0.9 0.37 0.7 0.89 1.18
250 Fusion Machines Fusion Capability for 63mm 250mm pipe (2 IPS 8 DIPS)
Fusion Capability for 63mm mm pipe (2 IPS 8 DIPS) Patent No s. 5,814,182 6,212,748 6,212,747 6,021,832 4,352,708 Japanese Patent No 4285806 European Patent No 0903215 (other patents pending) Rolling Wheeled
HAWLE - ZAK System. the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS.
HAWLE - System the threadless, restraint jointing system HAWLE. MADE FOR GENERATIONS. HAWLE - System the threadless, restraint jointing system for service connections integrated in Pipe Saddles, Service
HDPE PIPE SYSTEMS PRODUCT CATALOGUE.
HDPE PIPE SYSTEMS PRODUCT CATALOGUE www.acu-tech.com.au This is to certify that: The Trustee for The Morren Family Trust ABN 52 394 633 042 Trading As Acu-Tech Piping Systems 119 Kelvin Road Maddington
Caldertech Australia Pty Ltd Caldertech Australia Products Catalogue 2015/16
Caldertech Australia Pty Ltd Caldertech Australia Products Catalogue 2015/16 Polyweld Machinery Pty Ltd Unit 1 50 Prosperity Avenue Wangara WA 6065 Tel: (08) 9303 2164 Mobile: 0427 062 980 www.caldertech.com.au
GATOR AUTOMATIC BUTT FUSION
GATOR AUTOMATIC BUTT FUSION GATOR - AUTOMATIC BUTT FUSION The gator range of machines have been designed and developed to be used on gas and water pressure polyethylene pipes for distribution networks.
Air Handling Piping Systems
Air Handling Piping Systems ProVent - Compressed Air System - PP Vent Duct System www.asahi-america.com Table of Contents Table of Contents Product Specification... Page 350 SOCKET PIPE AND FITTINGS Pipe,
ROWELD Plastic Pipe Welding Equipment
212 ROWELD Plastic Pipe Welding Equipment Plastic Pipe Shears 214 215 Plastic Pipe Cutters 216 Plastic Pipe Hand Tools 21 Plastic Pipe Cutting & Chamfering Tools 218 220 Orbital Circular Saw for Plastic
KRAVITCH KEYHOLE TOOLS MODULAR PIKE TOOLING SYSTEM (PATENTED)
KRAVITCH KEYHOLE TOOLS MODULAR PIKE TOOLING SYSTEM (PATENTED) O P E R A T O R S HOW THE PIKE SYSTEM P I K E WORKS A D A P T E R S COMPLETELY MODULAR TRULY QUICK- DISCONNECT MODULAR SYSTEM CAN BE ADAPTED
PIPING. Aluminium pipe for inert gases (5,7 m / 18,7 ft) PAGE 2/ AIRNET Ø (MM / INCH) PARTNUMBER LOT SIZE / ¾" 05
PIPING Aluminium pipe for inert gases (5,7 m / 18,7 ft) 2811 1061 05 20 / ¾" 05 2811 2061 05 25 / 1" 05 PAGE 2/99 2014-11-24 Aluminium pipe for air (2,85 m / 9,4 ft) PIPING 2811 1063 10 20 / ¾" 10 2811
LARGE DIAMETER ELECTROFUSION COUPLERS
JILIN SONG JIANG SMART JOINT CO.,LTD www.smartjoint.net sales@smartjoint.net Tel: 0086-432-66976665 Fax: 0086-432-66976664 LARGE DIAMETER ELECTROFUSION COUPLERS METRIC SIZE UP TO 1000MM ASTM SIZE UP TO
PRODUCT / TEST MANUAL 2L9K2 BATTERY EARTH FAULT RELAY
Sheet 1 of 5 Order Number Serial Number PRODUCT / TEST MANUAL 2L9K2 BATTERY EARTH FAULT RELAY Issue Date Level B 27/05/1999 Initial issue. Summary of changes Due to RMS continuous product improvement policy
Ritmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite The information and photos in this publication are not binding and RITMO S.P.A. is free to make any alterations without prior notice. A RITMO DVANTAGE
28 Fusion Machines Fusion Capability for 2 IPS 8 DIPS pipe (63mm 225mm)
Fusion Capability for 2 IPS 8 DIPS pipe (63mm 225mm) Patent No s. 5,814,182 6,212,748 6,212,747 6,021,832 Japanese Patent No 45806 European Patent No 0903215 The line of fusion machines now come in multiple
To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION
Page - 1 To, Purchase Manager SUB. : LIST OF USED MACHINES WITH SPECIFICATION Dear Sir, We are pleased to enclose our offer for the following machines :- Draw Bench Semi Duty Twin HP 30 RPM 1500 (60' X
y, [ S Technical Symbols r = mm Radius Weight (total) new
Technical Symbols 0 y, [ S Weight (total) Length (total) Diameter (also dia. of head, of shaft, of points) Diameter Conformity with EU guidelines r = mm Radius new Catalogue page 576 Pipe Bending Systems
PARTS LIST, COUNTER CONVECTION STEAMERS MODELS SN-3E, SN-4E, SN-5E PARTS LIST COUNTER CONVECTION STEAMERS BLODGETT MODELS: SN-3E SN-4E
PARTS LIST COUNTER CONVECTION STEAMERS BLODGETT MODELS: SN-3E SN-4E November 27, 2013 BLODGETT OVEN CO 44 lakeside Ave Burlington, VT 05446 Tel. 802-658-6600 Fax 802-860-3732 www.blodgett.com 1 2013-11-27
POLYETHYLENE PIPE SYSTEMS AS/NZS 4129, AS/NZS 4130 Potable water, non-potable water, sewer, gas and conduit applications
POLYETHYLENE PIPE SYSTEMS AS/NZS 4129, AS/NZS 4130 Potable water, non-potable water, sewer, gas and conduit applications JAN 2017 1 CONTENTS PRESSURE PIPE 3 ELECTROFUSION FITTINGS 8 SPIGOT FITTINGS 18
STYLE 9300 FLOW/PRESSURE METER INSTALLATION & OPERATING INSTRUCTIONS
STYLE 9300 FLOW/PRESSURE METER INSTALLATION & OPERATING INSTRUCTIONS INTRODUCTION The Style 9300 Flow/Pressure Meter from Akron is designed to offer reliable and accurate service with an easy to install,
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit
Fusion Equipment & Tools Electrofusion Processor Scraper Tools Rerounding Tools Socket Fusion Kit 71 I Fuse 105 Electrofusion Processor The IntegriFuse I Fuse 105 Electrofusion Processor is the next generation
PRODUCT SAFETY NOTICE
PRODUCT SAFETY NOTICE Congratulations. This vehicle has been equipped with a Firestone air suspension system. This suspension will enhance the vehicle s handling when loaded, however, the vehicle s performance
PE SEWER PIPE SYSTEMS AS/NZS 4130, AS/NZS 4129 Gravity sewer applications
APPLICATIONS The PE sewer pipe system is designed specifically for the waste water industry and is best suited to gravity sewer and drainage applications. The pipe is co-extruded with a white internal
Plastic Welding. Y Type Butt Welding Fusion Machine. Product Description. Specifications
Y Type Butt Welding Fusion Machine HL-160Y2 Suitable for thermoplastic pipes or fittings made of PP, PB, PE, PVDF for field operation or in workshop. Consists of basic frame, planning tool, separate heating
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/ and 1580 Nl/min (1.321 and Cv)
Electrically operated valves Series M-07, 3/2-, 5/2- and 5/3-way G1/4 1300 and 1580 Nl/min (1.321 and 1.606 Cv) Order code Series and function M-07-310-HN-442 Standard coil HN at port 2 + 4 HN at port
Miller PipePro Auto XCS
Pg. 1/7 Pg. 2/7 Digital Automatic Welding System specific to weld the root pass with or without backing support in the pipeline. Note: the system needs to be fed with an electric generator having a minimum
NEW ADVANTAGE 29 SERIES - FULL BORE SDR11/PN16 MITRE BENDS
13 NEW PRICE LIST 1 October 2018 HDPE Long Spigot Fabricated Fittings Advantage 29 Series Mitred Bends Plastic Systems have been supplying bespoke fabricated fittings for major projects for many years.
HDD-Compact Drilling Rig with on board pump
Made in Germany HDD-Compact Drilling Rig with on board pump HDD-Compact Drilling Rig with on board X-pump, 300 kn - 800 kn pull force (30 t - 80 t) 18 knm - 45 knm torque PRIME DRILLING operates worldwide
- Largest working capacity in a compact foot print - Highest productivity - Highest reliability
MK63S SERIES MK63S series is our third generation of MK6S production vertical machining center; Backed up 675 units world wide installations in the past 2 years (1994-214), the MK63S series achieves: -
F111.X Flow Sensor for Hot Tap Installation INSTRUCTION MANUAL. 1. Introduction Safety Instructions Unpacking Description.
F111.X Flow Sensor for Hot Tap Installation INSTRUCTION MANUAL EN 08-05 Table of Contents 1. Introduction 2 1.1. Safety Instructions 2 1.2. Unpacking 2 2. Description. 2 2.1. Main Features.. 3 2.2. Technical
CHAPTER 1C PREPARING FOR INSTALLATION
CPI Canada Inc. Preparing for Installation 1C CHAPTER 1C PREPARING FOR INSTALLATION CONTENTS: 1C.1.0 INTRODUCTION... 1C-2 1C.2.0 GENERATOR POWER REQUIREMENTS... 1C-2 1C.2.1 32 kw Single Phase... 1C-2 1C.2.2
Certa-Set Main Line Piping System
Certa-Set Piping System Pipe (includes Couplings, Gaskets (O-rings) and Spline) Class 125 (yellow) Class 100 Emerald (green) Size SDR OD L BOD Min. Wall (lbs./ft.) Length / feet 25 feet 30 feet 40 feet
Wide range of tools for Plumbing and Underfloor Heating systems. Part No. Width Unit Price Each
Wide range of tools for Plumbing and Underfloor Heating systems Mini Press Tool Deal Mini Press + 16, 20, 25, 32, Jaws MAXI Press Tool Deal MAXI Press + 16, 20, 25, 32, 40, 50, 63, 75 Jaws call us on 01245
GAS DISTRIBUTION PRODUCTS CON-STAB ID SEAL FITTINGS
GAS DISTRIBUTION PRODUCTS CON-STAB ID SEAL FITTINGS CONTINENTAL INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
Hole-cutting. cutting a hole. After the hole has been cut all rough edges must be removed and the area within 5/8 (16mm) of the hole
Mechanical Tees Hole-cutting Shurjoint mechanical tees provide a fast and easy mid-point branch outlet, eliminating the need for welding or the use of multiple fittings. The Model M21 features a female
Large Electronically Adjustable Proportional Pressure Compensated Flow Control Engineering & Manufacturing Solutions
Engineering & Manufacturing Solutions LEFC Specifications: See flow chart for capacity. Max. 3000 psi cartridge input pressure. Nominally Rated for 3000 psi (207 bar). Tank Port - #4 SAE (10 psi (0.69
Model 1000 Vortex Meter
Model 1000 Vortex Meter Installation and Instruction Manual Table of Contents General Information... 1 1-1 General... 1 1-2 Principles of Operation... 1 1-3 Sensor Operation... 1 1-4 Calibration Factor...
RADIAL ALUMINUM HIGH PRESSURE
RADIAL ALUMINUM HIGH PRESSURE Content HIGH PRESSURE BLOWERS... 2 GENERAL... 3 PRESELECTED HIGH PRESSURE SERIES... 4 HRD 1/2T... 5 HRD 1/3 T... 6 HRD 1/4 T... 7 HRD 1/5 T... 8 HRD 14/5 T... 9 HRD 2/3 T...
Ritmo meets all your welding needs in your jobsite
Ritmo meets all your welding needs in your jobsite The information and photos in this publication are not binding and RITMO S.P.A. is free to make any alterations without prior notice. A RITMO DVANTAGE
GMC Yukon
Torch Series LED Grille TOOLS REQUIRED: Flat Head Screwdriver Long Flat Head Screwdriver Phillips Screwdriver 7mm Socket 10mm Socket Ratchet & Extensions 3/16 Drill Bit Power Drill Cutting Wheel or Saw
HP Modular Cooling System 200/100 Options Installation Guide
HP Modular Cooling System 200/100 Options Installation Guide Abstract This document is intended for the person who installs racks and rack products, is qualified in performing installations, and trained
NAME OF TRADE :- WELDER MAKE/ MODEL SPECIFICATION. 400A capacity with air cooled. 25 mm No. 15 KVA No
SI NO NAME OF TRADE :- WELDER WITH 1 D.C Arc welding rectifiers set with all accessories (400 A. OCV 60 100 V, 60% duty cycle ) 2 GMAW welding machine 400A capacity with air cooled torch, Regulator, Gas
OPERATION AND SAFETY MANUAL
OPERATION AND SAFETY MANUAL Since 1956 Trace live non-metallic gas mains with minimal excavation. Live Tracer utilizes traceable fiberglass rodder and stuffing box to trace main with no blow by. Use with
INSTRUCTION MANUAL. 1. Introduction 2. Safety Instructions.. 2 Unpacking Description. 2. Main Features... 3 Technical Data...
F111.H.BD Bi-Directional Turbine Flow Sensor for Hot Tap Installation INSTRUCTION MANUAL EN 10-11 Table of Contents 1. Introduction 2 Safety Instructions.. 2 Unpacking.. 2 2. Description. 2 Main Features...
SPOA10NB, SPOA10, SPO10. (500 Series Lifts) Capacity 10,000 lbs.
SPOA0NB, SPOA0, SPO0 (00 Series Lifts) Capacity 0,000 lbs. P A R T S OWNERS RECORD Complete information at right and keep in a safe place. LP08 800--8 MODEL: CAP. LBS: SERIAL NUMBER IMPORTANT DO NOT REMOVE
Horizontal Directional Drilling Rigs t
Made in Germany Horizontal Directional Drilling Rigs 30-100 t HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialised in Horizontal
PRODUCT CATALOGUE 2011
INNOVATIVE PIPESYSTEMS- SUCCESSFULL WORLDWIDE Fusiotherm climatherm aquatherm lilac aquatherm ISO aquatherm aquatherm SHT climasystem PRODUCT CATALOGUE 2011 Fusiotherm climatherm aquatherm lilac aquatherm
DIGITAL FLOWMETER AND PRESSURE INDICATOR MODEL FPA400
Document Number: XE-FPA4PM-R0A FPA400 Rev160601 DIGITAL FLOWMETER AND PRESSURE INDICATOR MODEL FPA400 OPTIONAL BACKLIGHTING FIRE RESEARCH CORPORATION www.fireresearch.com 26 Southern Blvd., Nesconset,
PRICE LIST WEFATHERM. 1 November PP-R Piping System WEFATHERM PIPE LEADERS IN PIPELINE TECHNOLOGY. Asmuss Plastic Systems Limited
143 PRICE LIST 1 November 2016 The Wefatherm PP-R System is ideally suited for use in a wide range of applications including hot and cold water systems, industrial heating and cooling, air-conditioning
Hawle Haku PE Pipe Saddle
Hawle Haku PE Pipe Saddle Scan for more information Technical Guide W9.1 Specifically designed as a PE mechanical connection solution. Suitable for PE pipes of all pressure ratings up to PN 16. DN40-360.
Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP
Versions of Prime Drilling HDD-Rigs PD 30/18 RP - PD 100/64 RP HDD-RIGS 300 kn - 1,000 kn pull force (30 t - 100 t) 18 knm - 64 knm torque PRIME DRILLING operates worldwide and is specialized in Horizontal
Professional Brochure of Machines and Diamond Tools for Construction
Professional Brochure of Machines and Diamond Tools for Construction INDEX 3 Drilling Selection chart for drilling machines P. 4 Drilling motors P. 5 / 7 Core drill stands P. 8 / 9 SDR 5 drilling stand
Parts Catalog TECHNICAL DOCUMENTS TABLE OF CONTENTS. Electric. Other. Non-electric
TECHNICAL DOCUMENTS Parts Catalog TABLE OF CONTENTS Electric Pumps... 2 Compressors.... 3 Fans.... 3 Valves... 3 Pressure switches.... 4 Dial pots and switches... 4 Breakers and fuses.... 5 Transformers....
Centrifugal Chiller PE046, PE047, PE048, PE050 PEH PF083, PF096, PF105, PF116 PH PHH PL
Centrifugal Chiller PE046, PE047, PE048, PE050 PEH046-050 PF083, PF096, PF105, PF116 PH046-050 PHH046-050 PL-906-49 Unit ASSY. - Labels / 1987 to Present Unit ASSY. - Labels / 1987 to Present No. Index
CPVC HOT & COLD PLUMBING SYSTEM PRICE LIST
CPVC HOT & COLD PLUMBING SYSTEM PRICE LIST With effect from 1st June, 2015 SDR-11 (3 Mtr. Length) (Rate per mtr.) 15 ½ M011110301 100 75.00 20 ¾ M011110302 50 110.00 25 1 M011110303 30 174.00 32 1¼ M011110304
4. Support for the. ProCut. The new. parameters. nesting R3 INTERNAL. June 2017 PAGE 1
RELEASE NOTES: Océ ProCut Version 4.7 Highlights freee upgrade for 4.x customers! 1. New improved nesting MINIMUM 20 to 25% faster, LESS WASTE! 2. Support for RM-L 3.6kW router 1 3. Support for MAM-D dual
Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz. Two Machines in One!
Millermatic 212 Auto-Set Issued Oct. 2008 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power
K-Factor. Global Installation Fittings and K-Factors. Global
K-Factor Global Installation Fittings an K-Factors Global K-Factor CD Table of Contents 5 6 7 8 13 14 21 22 27 28 35 36 37 38 39 40 47 48 49 50 51 52 59 60 61 62 63 64 65 66 67 68 79 80 81 82 83 84 91
Energy Monitoring (Plug-in to II *1 )
What is the Energy Monitoring? A plug-in (Add-on) of Interactive Intelligence which calculates the Energy Consumption of a complete system What are the features of the package? Automatic Configuration
212 Millermatic MIG Arc Welding Power Source,
Issued Jan. 2013 Index No. DC/12.46 212 Millermatic MIG Arc Welding Power Source, Auto-Set Wire Feeder and Gun Package Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home
Mid-Power Remote Unit (MRU) Outdoor Enclosure MIMO Assembly Quick Installation Sheet
Mid-Power Remote Unit (MRU) Outdoor Enclosure MIMO Assembly Quick Installation Sheet CMA-595-AEN GENERAL INFORMATION 1. Additional relevant documentation: MRU quick installation sheet provided with the
Section NV-1. Non-Leveling Track Frame - Frame and Covers. Non-Leveling Track Frame - Frame and Covers
Section NV-1 Non-Leveling Track Frame - Frame and Covers Non-Leveling Track Frame - Frame and Covers Last Updated - 09/2008 Non-Leveling Track Frame - Frame and Covers NV-1-1 Non-Leveling Track Frame -
Portable work- and clamping system
CROC LOCK Portable work- and clamping system An amazing work bench for many applications such as for example holding doors, fences, wood, ceiling boards, bikes, metal, automotive components and many other
Model PM5000 Portable Milling Machine
Model PM5000 Portable Milling Machine Features Applications Setup & Operation Components & Accessories Technical Data CLIMAX Portable Machine Tools, Inc. 05/99 1 Portable on-site milling solves your difficult
Table of contents. Chapter 1: Fusiotherm. Chapter 4: climasystem Produktgruppe 20. Chapter 5: aquatherm. Chapter 2: aquatherm SHT.
Table of contents Chapter 1: Fusiotherm 01 Fusiotherm -pipe 04 climatherm-pipe & aquatherm-lilac 07 Accessories 09 Fittings 15 Weld-in saddle 19 Threaded connections and accessories 22 Transition pieces
DIESEL GENERATOR SET DP03000D5S
DIESEL GENERATOR SET DP03000D5S 380V 11 kv/50 Hz/Prime/TA-Luft Optimized MTU 20V4000G63L/Water Charge Air Cooling Optional equipment and finishing shown. Standard may vary. PRODUCT HIGHLIGHTS // Benefits
MTAB. MACHINING CENTERS
MTAB www.mtabcnc.com MACHINING CENTERS OVERVIEW MTAB's Vertical Machining Center is designed to flex with the customers' manufacturing demands and requirements. The machines are high performance systems,
Economical, Automated Pipe Cutter Saves Layout and Fit-Up Time
Economical, Automated Pipe Cutter Saves Layout and Fit-Up Time MM1 Programmable Pipe Cutter The MM1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on
PULSE-8: MASTER PULSATION CONTROL
PULSE-8: CONTROL Version - February 2006 For Software Version V1.02 Part Number - 39-0020 CONTROL: INDEX GOOD PRACTICE: Mains Supply. A separate mains supply and earth running directly from the consumer
AQUIS Foam System. Installation, Operation, and Maintenance Instructions AQUIS 1.5, AQUIS 3.0, and AQUIS 6.0
Form Number: F-1031 Issue Date: Aug 1, 2017 Section: 2447 Revision Date: Sept 7, 2018 AQUIS Foam System Installation, Operation, and Maintenance Instructions AQUIS 1.5, AQUIS 3.0, and AQUIS 6.0 Waterous
B BASIC HEAT TREATMENT CONSOLE
Maritime Stress PO Box 2898, 30 Estates Road Dartmouth, NS, B2W 4Y2, Canada Toll Free: 1-877-468-1781 Phone: (902) 468-7873 Fax: (902) 468-2304 Website: E-mail: info@maritimestress.com OPERATION MANUAL
PRODUCT SAFETY NOTICE DEALER/INSTALLER NOTICE
PRODUCT SAFETY NOTICE Congratulations. This vehicle has been equipped with a Firestone air suspension system. This suspension will enhance the vehicle s handling when loaded, however, the vehicle s performance
DIESEL GENERATOR SET MTU 20V4000 DS2650
DIESEL GENERATOR SET MTU 20V4000 DS2650 380V 11 kv/50 Hz/Prime Power/TA-Luft Optimized MTU 20V4000G23/Water Charge Air Cooling Optional equipment and finishing shown. Standard may vary. PRODUCT HIGHLIGHTS
Economical, Automated Pipe Cutter Saves Layout and Fit-Up Time.
Economical, Automated Pipe Cutter Saves Layout and Fit-Up Time. MM1 Programmable Pipe Cutter The MM1 is a computer-controlled machine that automates the cutting of profiles, holes, nozzles and shapes on
DIESEL GENERATOR SET MTU 16V4000 DS2500
DIESEL GENERATOR SET MTU 16V4000 DS2500 380V 11 kv/50 Hz/Standby Power with overload/ta-luft Optimized MTU 16V4000G63/Water Charge Air Cooling Optional equipment and finishing shown. Standard may vary.
GAS DISTRIBUTION PRODUCTS METER RISERS
GAS DISTRIBUTION PRODUCTS METER RISERS INDUSTRIES ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and is today a leading manufacturer
STEAM N HOLD PARTS MANUAL S/N to 35389
STEAM N HOLD PARTS MANUAL S/N 29030 to 35389 accutemp products, inc. 8415 North Clinton Park Dr. Fort Wayne, in 46825 800 210-5907 accutemp.net TAble of Contents Table of contents 1 DOCUMENT HISTORY 1
Processes MIG (GMAW) Flux Cored (FCAW) Input Power 208/230 V, 1-Phase, 60 Hz
Millermatic 212 Auto-Set Issued Sept. 2009 Index No. DC/12.46 MIG Arc Welding Power Source Quick Specs Industrial Applications Metal Fabrication Maintenance and Repair Farm/Home Light Industrial The Power
Silencer Series Brushless DC Motors
Silencer Series Brushless DC Motors Medical and Commercial / Industrial TYPICAL APPLICATIONS Medical equipment - handheld devices, drills and saws Robotic systems Test and measurement equipment Pumps Scanners
CENTRAL VACUUM SYSTEMS
CENTRAL VACUUM SYSTEMS INSTALLATION INSTRUCTIONS Review this manual before installing the central vacuum system Dynovac Industries 1 800 226 1221 1 403 346 4877 #1, 6841 52 Avenue Red Deer, Alberta T4N
1.5. 7,250 psi Stainless steel V2A. 7,250 psi Stainless steel V2A. PUR cable type 3 IP 68 Embeddable 600 Hz Table 6 Diagram
43 1 1 14,9 47 1 9 9 7 Max. operating pressure Sensing face HIGH-PRESSURE-RESISTANT P12 see page 7 see page 14 9 Compatible connectors DW-AD-01-P12-39 DW-AD-03-P12-39 DW-AD-01-P12-2 DW-AD-01-P12-27 DW-AS-01-P12-24
SD135B. Volvo Single Drum Compactors t 110 kw
SD135B Volvo Single Drum Compactors 12.6-13.3 t 110 kw A passion for performance At Volvo Construction Equipment, we re not just coming along for the ride. Developing products and services that raise productivity
Parts List Book CPE CPVS
Code 2205 6010 04 Edition 08/2013 Oil-injected Rotary Screw Compressors Parts List Book CPE125-1 CPVS125-1 People.Passion.Performance. CONTENTS WARRANTY AND LIABILITY LIMITATION... 2 ORDERING SPARE PARTS...
Sincerely, Your Partners at Specified Fittings
N E S Specified Fittings E S 164 W. Smith Rd. Bellingham, WA 98226-9616 Mailing Address PO Box 28157 Bellingham, WA 98228-0157 PVC FITTINGS W PIP: GASKETED SDR81 - SDR32.5 N Mexico 800-429-1705 Toll Free
+GF+ CLASS 267. Factory Mutual Approved. HDPE Pipe & Pipe Fittings GEORG FISCHER PIPING SYSTEMS centralplastics.
Factory Mutual Approved CLASS 26 HDPE Pipe & Pipe Fittings CENTRAL PLASTICS 8.499.692 Table Of Contents 18-1 Design-Flow HDPE IPS HDPE Pipe (Iron Pipe ) 4-24 18-2 PE 368 HDPE Physical Properties - FM 18-3
Subarc DC Series. Processes Submerged Arc (SAW) Stick (SMAW) Air Carbon Arc Cutting and Gouging (CAC-A) Subarc DC 650 shown.
Subarc DC Series Issued August Index No. DC/9. Submerged Arc Welding Power Source Quick Specs Heavy Industrial Applications Railcar Shipbuilding Heavy Fabrication Pipe Manufacturing Pressure Vessel Processes
L/6.7L DODGE CUMMINS
10/19/2012 2005-08 5.9/6.7 Dodge Cummins FlowMAX Lift Pump Kit # 1050310B - 1-2005-09 5.9L/6.7L DODGE CUMMINS BD FLOWMax V2 LIFT PUMP KIT Installation Instructions P/N # 1050310B PLEASE READ ALL INSTRUCTIONS
White Paper. Application of Resistive/Reactive Load Banks for kva Testing
White Paper Application of Resistive/Reactive Load Banks for kva Testing Application of Resistive/Reactive Load Banks for kva Testing Resistive load banks are the most commonly used load banks for the
Model: ACP-12 AUTO COMPRESSOR PUMP SYSTEM 12 VDC INSTALLATION & OPERATION MANUAL. Phone:
INSTALLATION & OPERATION MANUAL Model: ACP-12 AUTO COMPRESSOR PUMP SYSTEM 12 VDC Manual Part # M-ACP12 Revised 10/27/08 KK 1 INTRODUCTION The Auto Compressor Pump system is a compact 12 VDC electric motor
LEVEL AND FLOW MEASUREMENT WS131 FLOW METER USER MANUAL.
LEVEL AND FLOW MEASUREMENT WS131 FLOW METER USER MANUAL www.enoscientific.com Eno Scientific PO Box 1586 Hillsborough, NC 27278 USA www.enoscientific.com 910-778-2660 Copyright Notice Copyright 2015 Eno
Portable Generators Power - when you need it - where you need it
Portable Generators Power - when you need it - where you need it The Westinghouse Story George Westinghouse 1846-1914 In 1886, the American inventor and entrepreneur George Westinghouse amazed the world