Complete Product Line

Transcription

1 Complete Product Line Screwdriving Technology Aumation Air Mors Air Tools D0012E

2 2 OVERVIEW SCREWDRIVING TECHNOLOGY SCREWDRIVERS - Handheld screwdrivers pneumatic NANOMAT / MICROMAT / MINIMAT Page 4/5/6 MICROMAT-ESD / MINIMAT-ESD / SENSOMAT Page 7 MICROMAT-F / MINIMAT-F Page 8 - Handheld screwdrivers pneumatic for special applications VARIOMAT the drilling screwdriver / RECYCLING screwdrivers Page 9 Slip clutch screwdrivers / Flat head wrench Page 9 Impulse driver with shut-off Page 10 MINIMAT-T the depth sp driver Page 10 - Handheld screwdrivers electric Electric screwdrivers, Cordless screwdriver, Cordless Impact Wrenches Page 11 - Handheld screwdrivers electric MINIMAT-EC / MINIMAT-EC-Servo Page 12/13 MINIMAT-EC Cordless Screwdriver Page 13 MINIMAT-ED Digital electric screwdriver Page 13 - Screwdriver spindles pneumatic NANOMAT / MICROMAT / MINIMAT / SENSOMAT Page 14/15 - Screwdriver spindles electric MINIMAT-EC-Servo / NANOMAT-EC / MICROMAT-EC / MINIMAT-EC / MINIMAT-E, MINIMAT-ED Digital electric screwdriver Page 16 MEASUREMENT TECHNOLOGY Measuring instruments for manual use Page 17 Torque transducer for measurement electronic Page 17 Torque transducer with manual indicar Page 17 CONTROLLER TECHNOLOGY Screwdriving Controllers AST5 / AST6 / AST11 / AST30 / AST40 Page 18/19 Function control fc11 / fc20 Page 20 FEEDING TECHNOLOGY Vibrary bowl feeders and sword feeders Page 20 for handheld screwdrivers and press-in-ols ERGOMAT-Z the stroke screwdriver for feeding machines Page 20 DEPRAG FEED MODULE Page 20 Press-in ols for feeding system Page 21 Feeding machines for stationary use Page 21 Nut feeders for stationary use Page 21 Feeding machines for small components for stationary use Page 21 Supply systems Linear hoppers for feeding systems Page 21 Screw presenters Page 21 Tape-on-reel Page 21 AUTOMATION SCREWDRIVING AND ASSEMBLY SYSTEMS Page 22 STANDARDISED ASSEMBLY SYSTEMS DCAM Page 23 FULLY EQUIPPED MANUAL WORK STATIONS Page 23

3 OVERVIEW 3 AUTOMATION MACHINE BUILDING COMPONENTS - Controller technology Systems and processing controller DCOS Page 24 - Feeding technology Page 20/21 - Measurement technology Page 18 - Screwdriving function modules Page 25 - Screwdriver spindles Page 14/15/16 AIR MOTORS AIR VANE MOTORS BASIC LINE / ADVANCED LINE Page 26 POWER LINE / INDIVIDUAL LINE Page 27 AIR VANE MOTORS FOR SPECIAL APPLICATIONS Drilling mors, Milling mors, Grinding mors Page 27 Air mors with integrated holding brake, Gear mors Page 28 TURBINES Turbine production according your specific applications Page 28 Innovative turbine generar Page 28 TOOTH-GEAR MOTORS SPEED REGULATOR ACCESSORIES Page 29 Page 29 Page 29 GREEN ENERGY Details will be provided at DEPRAG INDUSTRIAL AIR TOOLS Any news and further details will be provided at All catalogues can be downloaded from there. GENERAL INFO Listing of individual catalogues Page 30/31

4 4 HANDHELD SCREWDRIVERS PNEUMATIC with mechanical shut-off clutch NANOMAT / MICROMAT Screwdrivers U U Type Part no. Torque Speed, Screws Weight min. max. max. idling soft pull-up hard pull-up Ncm Ncm Ncm rpm kilos straight, reversible, push--start (hex. female), 3 mm U C U E U F M U G straight, right rotation, push--start (hex. female), 3 mm A A M A A straight, reversible, push--start (hex. female), 3 mm U A U A M U B U A Performance data relate an air pressure of 6.3 bar (90 psi) MINIMAT Screwdrivers U U U U U U U U U U Type Part no. Torque Speed, Screws Weight min. max. max. idling soft pull-up hard pull-up Nm Nm Nm rpm kilos straight, reversible, push--start (hex. female), 1 / U A U B M U C U D U A U E M U B U D U C M U A U B M U C U B M U C M U D U E M straight, reversible, lever-start (hex. female), 1 / U A U E M U B U D U C M U A U B U C M U C U D U E M Performance data relate an air pressure of 6.3 bar (90 psi)

5 HANDHELD SCREWDRIVERS PNEUMATIC with mechanical shut-off clutch 5 MINIMAT Screwdrivers Type Part no. Torque Speed, Screws Weight min. max. max. idling soft pull-up hard pull-up Nm Nm Nm rpm kilos pisl grip, lower air-inlet, reversible, trigger-start (hex. female), 1 / U A M U B M U D U C M U A U B M U C U B M U C M U D U E M pisl grip, upper air-inlet, reversible, trigger-start (hex. female), 1 / OU A M OU B M OU D OU C M pisl grip, lower air-inlet, reversible, push--start (hex. female), 1 / U A M U B M U D U C M U A U B M U C U B M U C M U D U E M pisl grip, upper air-inlet, reversible, push--start (hex. female), 1 / OU A M OU B M OU D OU C M pisl grip, lower air-inlet, upper air-inlet or rear air-inlet, reversible, trigger-start (hex. female), 1 / U D M U E M U F M pisl grip, lower air-inlet, upper air-inlet or rear air-inlet, reversible, push--start (hex. female), 1 / U D M U E M U F M Performance data relate an air pressure of 6.3 bar (90 psi) OU OU U U U U U U

6 6 HANDHELD SCREWDRIVERS PNEUMATIC with mechanical shut-off clutch MINIMAT Screwdrivers U U U U U U U U U U U U-SW U-SW U-SW U-SW U-SW.. Type Part no. Torque Speed, Drive Screws Weight min. max. idling Nm Nm rpm kilos angle-head, reversible, lever-start (square male) U B / M U-E B / U D / U-E D / M U C / U-E C / U A / U-E A / U B /4 M U-E B / U-E C / U-E D /2 M U-E E /2 M U-E C /8 M U-E D /8 M U-E E / U-E B /2 M U-E C / U-E D /2 M U-E B /8 2.2 M U-E C /8 2.2 angle-head, reversible, lever-start (hex. female, non-magnetic) U-D B M U-D D M U-D C /4 M U-D A M U-D B M angle-head, reversible, lever-start (hex. female, magnetic) U-DM B M U-DM D M U-DM C / U-DM A M U-DM B angle-head, reversible, lever-start (hex. female, with quick change chuck) U-F B M U-F D M U-F C / U-F A M U-F B angle-head, reversible, lever-start (hex. female, with quick change chuck and spring-sleeve) U-FH B M U-FH D M U-FH C / U-FH A M U-FH B angle-head, reversible, lever-start (integrated socket with hex. female drive) U-SW B AF U-SW B AF M U-SW B AF U-SW B AF U-SW D AF U-SW D AF U-SW D AF U-SW D AF M U-SW C AF U-SW C AF U-SW C AF U-SW C AF U-SW A AF U-SW A AF U-SW A AF U-SW A AF M U-SW B AF U-SW B AF U-SW B AF U-SW B AF Performance data relate an air pressure of 6.3 bar (90 psi)

7 HANDHELD SCREWDRIVERS PNEUMATIC with mechanical shut-off clutch 7 MICROMAT-ESD / MINIMAT-ESD Screwdrivers Type Part no. Torque Speed, Drive Screws Weight min. max. max. idling soft hard pull-up pull-up Nm Nm Nm rpm kilos straight, reversible, push--start (hex. female) UESD A UESD B mm UESD A UESD C M UESD A UESD B UESD C UESD D UESD A UESD B /4 M UESD D UESD C M UESD A UESD B M UESD C Performance data relate an air pressure of 6.3 bar (90 psi) UESD UESD UESD UESD UESD UESD HANDHELD SCREWDRIVERS PNEUMATIC with controlled clutch function SENSOMAT Screwdrivers Type Part no. Seating Driving Speed, Screws Weight Torque Torque idling min. max. max. Nm Nm Nm rpm kilos straight, reversible, push--start (hex. female), 1 /4 347S-218U A S-318U B M 3 347S-518U C S-618U D S-328U B M 4 347S-428U D S-528U C S-238U B M S-738U C pisl grip, lower air-inlet, reversible, trigger-start (hex. female), 1 /4 347S-327U B M 4 347S-427U D S-527U C S-237U A M S-737U B pisl grip, upper air-inlet, reversible, trigger-start (hex. female), 1 /4 347S-327OU B M 4 347S-427OU D S-527OU C M Performance data relate an air pressure of 6.3 bar (90 psi) 347S-327U 347S-527U 347S-328U 347S-528U

8 8 HANDHELD SCREWDRIVERS PNEUMATIC with mechanical shut-off clutch MICROMAT-F / MINIMAT-F Screwdrivers 345F F F-227O 347F-527O 347F F F F-521 Type Part no. Torque Speed, Drive Screws Weight min. max. max. idling soft hard pull-up pull-up Nm Nm Nm rpm kilos straight, right rotation, push--start (hex. female) 345F A F B mm F C F D M 3 347F A F B F C F D F A F B M F D /4 347F C M 5 345F A F B M 6 345F C F B M F C M 6 346F D F E M pisl grip, lower air-inlet, right rotation, trigger start (hex. female) 347F A M F B M 4 347F D F C M 5 345F A /4 345F B F C M 6 346F C F D F E M pisl grip, upper air-inlet, right rotation, trigger-start (hex. female) 347F-227O A M F-327O B /4 M 4 347F-427O D F-527O C M pisl grip, lower air-inlet, reversible, trigger-start (hex. female) 347F-227U A M F-327U B M 4 347F-427U D F-527U C /4 M F-737U C M 6 346F-337U D F-437U E M pisl grip, upper air-inlet, reversible, trigger-start (hex. female) 347F-227OU A M F-327OU B /4 M 4 347F-427OU D F-527OU C M angle-head, right rotation, lever-start (square male) 377F B M F D M 5 377F C / F A F B M F C F D M F E /2 377F-941-E B M F-741-E C F-841-E D M Required accessories for MINIMAT-F screwdriver: Performance data relate an air pressure of 6.3 bar (90 psi) Function controller fc und pneumatic controller pc. For technical details see brochure D3440E or page 18/19 of this catalogue.

9 HANDHELD SCREWDRIVERS PNEUMATIC FOR SPECIAL APPLICATIONS 9 VARIOMAT - drilling machine and screwdriver in one ol Type Part no. Torque Speed, Screws Gemin. max. soft max. hard idling wicht pull-up pull-up nominal Nm Nm Nm rpm Ø kilos Basic model, drive 1 /2 20 UNF / F6.3 *) UH A according equipment (equipment optional) 2000 max Please order necessary accessories extra *) according equipment, see also broschure D3520E Performance data relate an air pressure of 6.3 bar (90 psi) UH RECYCLING Drivers Type Part no. Torque max. Speed, idling Weight Nm rpm kilos straight, reversible, push--start (hex female), 1 / UL A UL B pisl grip, lower air-inlet, reversible, trigger-start (hex. female), 1 / UL E UL F Performance data relate an air pressure of 6.3 bar (90 psi) UL UL UL UL Flat head wrenches Type Part no. Speed, idling rpm Screws Weight, kilos straight, lever-start, closed head K A M 4 - M K F K G 160 M 4 - M K A M 6 - M L C K N 110 M 8 - M Performance data relate an air pressure of 6.3 bar (90 psi) K K K

10 10 HANDHELD SCREWDRIVERS PNEUMATIC FOR SPECIAL APPLICATIONS Impulse Driver with shut-off HY115G1 HY135G8 HY235P7 HY160P7 Type Part no. Torque Speed, Air con- Drive Screws Weight min. max. idling sumption Nm Nm rpm m 3 /min kilos pisl grip, reversible (quick change chuck with hex. female) HY115G A /4 M HY135G A /16 M pisl grip, reversible (quick change chuck with hex. female) HY307P A M 5 M HY211P A M /4 HY220P A M HY235P A M 8 1 pisl grip, reversible (square male) HY160P A M 10 2 HY180P A /2 M HY1120P A M Performance data relate an air pressure of 6.3 bar (90 psi) MINIMAT-T the Depth-Sp-Driver 345T-7258U 345T-3258U 345T-4258U 345T-7257U 345T-3257U 345T-4257U Type Part no. Torque Speed, Weight max. idling Nm. rpm kilos straight, reversible, push--start (hex. female), 1 /4 345T-7258U A T-3258U B T-4258U C pisl grip, lower air-inlet, reversible, trigger-start (hex. female), 1 /4 345T-7257U A T-3257U B T-4257U C Performance data relate an air pressure of 6.3 bar (90 psi)

11 HANDHELD SCREWDRIVERS ELECTRIC 11 Electric Screwdrivers with mechanical shut-off clutch Type Part no. Torque Speed, Screws Weight min. max. reversible Nm Nm rpm kilos straight, reversible, lever-start (hex. female), 1 /4 342EGT A /1000 M EGT A /1000 M EGT A / M 4 342EGT A / EGT A /1000 M EGT A /800 M EGT A /550 M straight, reversible, push--start (hex. female), 1 /4 342EGA A /1000 M EGA A / M 4 342EGA A / EGA A /1000 M EGA A /800 M EGA A /550 M EGT-0003 with screwdriver-cable 342EGT EGT EGA EGA EGx-0088 Cordless Screwdriver with mechanical shut-off clutch Type Part no. Torque min. / max. Nm Speed, reversible rpm pisl grip, reversible, trigger-start (quick change chuck with hex. female), 1 /4 Screws 342APT A 1.0 / /2000 M 4 342APT A 2.0 / /1000 M 5 Required accessories for cordless screwdrivers: Rechargeable battery, charger and power supply cable. For technical details see brochure D3484E. 342APT-... Cordless Impact Wrenches with aumatic shut-off Type Part no. Torque max. Nm Speed, idling rpm Impacts per minute pisl grip, reversible, trigger-start (square male), ½" 300APTS A Required accessories for cordless impact wrenches: Rechargeable battery, charger and power supply cable. For technical details see brochure D3487E. min APTS-250

12 12 HANDHELD SCREWDRIVERS ELECTRIC MINIMAT-EC-Servo Screwdrivers Type Part no. Torque, Nm Speed, rpm Drive min. max. min. max. straight, push--start (hex. female) 325EGA A EGA B EGA C mm 325EGA D EGA E EGA F EGA G /4 Required accessories for EC-Servo screwdrivers: Sequence controller and power supply cable. For technical details see brochure D3496E or page 18/19 of this catalogue. MINIMAT-EC-Servo 325EGA EGA MINIMAT-EC 320EPT27-320EPT36-320EWT EWT36-.. MINIMAT-EC 320EGT22- trigger start MINIMAT-EC-Servo 325EGA EGA MINIMAT-EC 320EGA27-320EGA36- MINIMAT-EC Screwdrivers Type Part no. Torque, Nm Speed, rpm Drive min. max.*) min. max.*) straight, push--start (hex. female) 320EGA G EGA F EGA A EGA B mm 320EGA C EGA B EGA D EGA E EGA F EGA C EGA D EGA A /4 320EGA B EGA C EGA D EGA G pisl-grip, trigger-start (hex. female) 320EPT B mm 320EPT C EPT D EPT A EPT B /4 320EPT C EPT D angle head, lever-start (square male) 320EWT E B EWT E C /4 320EWT E E EWT E B EWT E C /8 320EWT E E EWT E B EWT E C /4 320EWT E D EWT E E EWT E B /8 320EWT E C Required accessories for EC screwdrivers: Sequence controller, mor cable and power *) as per VDI/VDE 2647 Directive supply cable. For technical details see brochure D3490E or page 18/19 of this catalogue. Remark: All EC Screwdrivers in straight version are also available with trigger start. Please see brochure D3490E.

13 HANDHELD SCREWDRIVERS ELECTRIC 13 MINIMAT-EC Screwdrivers Type Part no. Torque, Nm Speed, rpm Drive min. max.*) min. max.*) angle head, lever-start (hex female) 320EWT F B EWT F C EWT F E EWT D B EWT D C EWT D E EWT DM B EWT DM C /4 320EWT DM E EWT F B EWT F C EWT D B EWT D C EWT DM B EWT DM C Required accessories for EC screwdrivers: Sequence controller, mor cable and power *) as per VDI/VDE 2647 Directive supply cable. For technical details see brochure D3490E or page 18/19 of this catalogue. MINIMAT-EC-Cordless Screwdriver 318AWT-... Type Part no. Torque, Nm Speed, rpm Drive min. max. min. max. angle head, trigger-start (square male) 318AWT D ¼" 318AWT A AWT B AWT C /8 318AWT E Required accessories for Cordless Angle Nutrunner: Rechargeable battery and Charger For technical details see brochure D3710E. MINIMAT-EC Cordless Screwdriver Type Part no. Torque, Nm Speed, rpm Drive min. max. min. max. pisl grip, trigger-start (hex. female) 318APT A APT B /4 318APT E Required accessories for MINIMAT-EC Cordless screwdriver: Rechargeable battery and Charger For technical details see brochure D3710E. 318APT-... MINIMAT-ED Digital Electric Screwdriver Type Part no. Torque, Nm Speed, rpm Drive min. max. straight, trigger-start or push--start (hex. female) 330EG A EG B /4 330EG C EG E Required accessories for Digital screwdrivers: Power supply, mor cable and power supply cable For technical details see brochure D3495E. 330EG36-.. MINIMAT-EC-Servo Screwdriver Type Part no. Torque, Nm Speed, rpm min. max. min. max. angle head design 315EWT E A EWT E B EWT E C Required accessories for EC-servo screwdrivers: Sequence controller and mor cable. For technical details see brochure D3497E or page 18/19 of this catalogue. 315EWT58-..

14 14 SCREWDRIVER SPINDLES PNEUMATIC with mechanical shut-off clutch NANOMAT / MICROMAT / MINIMAT Screwdriver Spindles with Off-Set-Gear Type Part no. Torque Speed, Drive Weight min. max. soft max. hard idling pull-up pull-up Nm Nm Nm rpm kilos right rotation, push--start (hex. female) C E F G mm A A A B A B C D A B / C B C D E ) A ) B / ) C ) D B C / D for Off-Set / Reduction Gear, right rotation, push--start LV A for Off-Set Gear A LV B for Off-Set Gear A LV C for Off-Set Gear A LV C 1/4 1) for Off-Set Gear B LV D for Off-Set Gear B LV E for Off-Set Gear B D for Off-Set Gear A /8 2) 3.2 for Off-Set Gear A /2 2) E for Off-Set Gear A /8 2) 3.2 for Off-Set Gear A /2 2) 4.1 for Off-Set Gear A /2 2) 4.4 1) hex. female 2) square male 3) with Remote-Start Performance data relate an air pressure of 6.3 bar (90 psi)

15 SCREWDRIVER SPINDLES PNEUMATIC with mechanical shut-off clutch 15 MINIMAT Screwdriver Spindles Type Part no. Torque Speed Drive Weight min. max. max. Nm Nm rpm kilos angle head, right rotation, remote start (square male) E B /4 1) E D /4 1) E C /4 1) E B / E C / E D / E E / E C / E D / ) also available with hex. female Performance data relate an air pressure of 6.3 bar (90 psi) E6, E12,5 All Screwdriver Spindles in angle head design are also available with reversible operation. SCREWDRIVER SPINDLES PNEUMATIC with controlled clutch function SENSOMAT Screwdriver Spindles Type Part no. Seating Driving Speed Weight Torque Torque idling min. max. max. Nm Nm Nm rpm kilos SENSOMAT, right rotation, push--start (hex. female), 1 /4 347S A S B S C S B S C Performance data relate an air pressure of 6.3 bar (90 psi) Remark: All pneumatic Screwdriver Spindles are also available with left-rotation, reversible and remote-start operation.

16 16 SCREWDRIVER SPINDLES ELECTRIC MINIMAT-EC-Servo Screwdriver Spindles Type Part no. Torque Speed Drive Weight min. max. min. max. Nm Nm rpm rpm kilos 311E E 36- EC-Screwdrivers with Torque- and Angle Transducer (hex. female) 311E A E B E C / E E E A E C E D /16 311E B E D E D E F ¾" E H The screwdriver spindles of the series 311E can be supplied with a redundant measuring system for rque and angle. Technical details are available in our catalog D3161E. NANOMAT-EC / MICROMAT-EC / MINIMAT-EC Screwdriver Spindles Type Part no. Torque Speed Drive min. max.*) min. max.*) Nm Nm rpm rpm 320E E19-320E22-320E27-320E36- EC-Screwdrivers (hex. female) 320E B E A E C mm 320E B E D E E /4 320E D B mm 320E D H E D C E D D E D E E D A /4 320E D F E D B E D C *) as per VDI/VDE 2647 Directive MINIMAT-E Screwdriver Spindles 342EA Type Part no. Torque Speed Drive min. max. Nm Nm rpm Screwdrivers with mechanical shut-off clutch, stationary (hex. female), push--start 342EA A EA B EA C EA A EA B EA A /4 342EA A EA B EA C EA A EA B All MINIMAT-E Screwdriver Spindles are also available with remote-start operation. Required Accessories for: NANOMAT-EC / MICROMAT-EC / MINIMAT-EC and MINIMAT-EC Servo screwdriver spindles: Controller Page 18/19 of this catalogue

17 SCREWDRIVER SPINDLES ELECTRIC 17 MINIMAT-ED Digital Electric Screwdriver Spindles Type Part no. Torque, Nm Speed, rpm Drive min. max. min. max. straight, (hex. female) 330E A E B E E /4 330E C Required accessories for Digital screwdriver spindles: Mor cable, power supply, interface and software. For technical details see brochure D3195E. 330E MEASURING TECHNOLOGY Measuring Instruments for manual use Designation Type Measuring range Electric Remark Power Supply Rechargeable Measuring electronic Measuring electronic Measuring electronic ME5000 ME5400 ME6000 ME6100 ME5600 see transducer see transducer see transducer Battery with Docking Station Battery charger Power Unit 100 up 240 Volt (50 or 60 Hz) Power Supply 85 up 264 Volt (50 or 60 Hz) Torque-Transducers for measuring instruments Value Display Value Display external standard PC-Monir Value Display LC-Display graphic Touch Screen Designation Type Part no. Measuring range Nm Piezo-electric (PE) transducers Torque-Dynamometer Torque-Wrench Strain gage (DMS) transducers Torque-Dynamometer Torque-Wrench Offset rque transducers Torque transducer MP1PE C MP25PE A MP200PE A MP1000PE A MS25PE-W A MS25PE-WS C MP2DMS B MP7DMS A MP25DMS C MP160DMS D MP500DMS A MS2DMS B MS7DMS A MS7DMS-W A MS25DMS-W C V002-E6.3/F B (pos./neg.) V005-E6.3/F C (pos./neg.) V010-E6.3/F D 1 10 (pos./neg.) V020-E6.3/F E 2 20 (pos./neg.) Mechanical Torque-Wrenches with manual indicar Part no. Measuring range Increment Drive (square male) Nm Nm / / / /8 Measuring electronic ME 5000 with Docking Station Torque-Dynamometer Torque-Wrench Offset Torque transducer Mechanical Torque Wrench ME5400 ME6000 ME6100 ME5600

18 18 CONTROLLER TECHNOLOGY - Screwdriving controllers - AST Next the screwdriver, the screwdriving controller is the most important component of an electronic screwdriving system. It controls the EC drive of the screwdriver according the parameters of the screwdriving sequence, it evaluates measurement signals and provides all operating and documentation functions. The available systems - EC and EC servo, both equipped with highly dynamic brushless servo mors, differ in the way they generate rque measurement values. Whilst the EC technology of the controllers AST5, AST6 and AST11 are based on the exact mor current measurement, in the EC servo system of the controller AST30 or AST40 the signals of the measurement transducer integrated in the ol are evaluated. Screwdriving controller Type AST5 / AST5-S AST5 Torque range: 0.01 Nm Nm For MICROMAT-EC and MINIMAT-EC handheld screwdrivers (further details D3490E) For MINIMAT-EC-Servo handheld screwdrivers (further details D3496E) Number of multi-level screw sequences: 100 Documentation options: internal srage, output via Ethernet (Datalogger, http) Operar friendly colour uch screen for direct entry of screw sequences and tightening parameters, graphic portrayal of screwdriving graphs Screwdriving controller Type AST6 / ASTi6 AST6 Small size fit in manual work stations Torque range: Nm For NANOMAT-EC and MICROMAT-EC screwdriver spindles (further details D3165E) Number of multi-level screw sequences: 100 Documentation options: internal srage, output via Ethernet (Datalogger, http) Operar friendly colour uch screen for direct entry of screw sequences and tightening parameters, graphic portrayal of screwdriving graphs Small size for confi ned spaces ASTi6 without display, for installation in a switch cabinet ASTi6

19 CONTROLLER TECHNOLOGY - Screwdriving controllers - AST 19 Screwdriving controller Type AST11 Torque range: Nm For MICROMAT-EC and MINIMAT-EC screwdrivers handheld and screwdriver spindles (further details D3490E or D3165E) Number of multi-level screw sequences: 16 Documentation options: internal srage, output via Ethernet (Datalogger, http), adjustable printer interface PLC interface: inputs/outputs Integrated RS232 port with varied options: - 4 fieldbuses available: Profibus, Profinet, EtherCat, EthernetIP - direct connection of a barcode scanner - connection of a serial printer AST11 Screwdriving controller Type AST30-31 Torque range: Nm For MINIMAT-EC-SERVO screwdrivers handheld, angle-head design (further details D3497E) Number of multi-level screw sequences: 32 Documentation options: internal srage, output via RS232 or Ethernet (Datalogger), printer interface PLC interface: input/output, Profibus AST30 Screwdriving controller Type AST40 / ASTi40 Torque range: Nm For MINIMAT-EC-SERVO screwdriver spindles (further details D3161E) Number of multi-level screw sequences: 120 (via input/output interface) Documentation options: internal srage, output via RS232 or Ethernet (Datalogger), printer interface PLC interface: input/output, Profibus, Profinet, EtherCAT, EthernetIP AST40 ASTi40 without display, for installation in a switch cabinet ASTi40

20 20 CONTROLLER TECHNOLOGY Function control - fc The function control increases the processing reliability of manual screwdriving assembly. It enables moniring of every single screw assembly and guarantees the success of the screw connection on the component. fc11 Screwdriver controller fc11 The screwdriving function controller fc11 and the handheld screwdriver MICROMAT-F/MINIMAT-F provide the intelligent solution for your processing reliability. The screw system counts your assemblies, monirs their times, shuts-off only upon reaching rque, recognises work piece exchange and is 100 % self-checking. Screwdriver controller fc20 The functions control fc20 also enables the moniring of complex assembly processes through programmable sequences. This screwdriver controller can control up three screwdrivers of differing types. The use of the fc20 allows you high flexibility for various screwdriving requirements on one component. fc20 FEEDING SYSTEMS Vibrary Bowl Feeders Sword Feeders Vibrary Bowl Feeders and Sword Feeders for handheld Drivers and Press-In Tools Type Number of Filling max. max. Shaft dia. Power screw- capacity Head dia. Shaft length from - source drivers l mm mm mm AC Volt DC ES/0.15-x x V/115 V x ERGOMAT-Z ERGOMAT-Z the stroke screwdriver for feeding machines Type Part no. Torque Speed, Drive Screws Weight min. max. idling Nm Nm rpm kilos 347V A M V B M /4 347V C M V G M Performance data relate an air pressure of 6.3 bar (90 psi) DEPRAG FEED MODULE - DFM DEPRAG FEED MODULE (DFM) version 1 1 stroke, screw assembly via nosepiece, stroke 60mm, max. vertical pressure 120N DEPRAG FEED MODULE DEPRAG FEED MODULE (DFM) version 2 2 strokes, vacuum-supported screw/nut assembly, stroke 60mm, max. vertical pressure 120N Please find more informations about the DEPRAG FEED MODULE in our brochure D3820E.

21 FEEDING TECHNOLOGY 21 Press-In Tools for feeding systems Type Parts be transported Remark EDG-.. with one press-in stroke Rivets, Dowel Pins EDGZ with one press-in stroke and Pins, Bushings one additional locking stroke Screwfeeding Machines for stationary use Type Number of Filling max. max. Shaft dia. Power screw- capacity Head dia Shaft length from - source drivers l mm mm mm AC V/115 V / Volt DC / /40 120/ V/115 V Press-In Tools Nut Feeders for stationary use Type Number of Filling Across Female max. Power screw- capacity Flats Thread Nut height source drivers l mm mm mm AC / 2 / / 2 / / Volt DC Vibrary Bowl Feeders Feeders for small components for stationary use Type Number Filling Power of capacity Parts be transported source Outlets l AC Rivets, Bolts, Pin, Washers Sleeve etc Tooling Parts, Balls 230 V/115 V Screwfeeding Machines for aumated Assembly Units can be supplied with or without magnetic valves, as well as with electronic sequence control integrated. Supply systems - Linear hoppers for feeding systems Belt Hopper Type Part no. Filling capacity Operating Voltage l DC B A V B A V Screw-Presenters Type Number of Filling Shaft dia. Shaft length Operating Remark screw- capacity from - from - Voltage drivers l mm mm DC SG for handheld Screwdrivers SG for stationary Screwdrivers Screw-Presenters Tape-on-reel Type Suitable Operating components Voltage single- and double-sided 24 V adhesive components Tape-on-reel

22 22 SCREWDRIVING AND ASSEMBLY SYSTEMS From highly aumated large-scale systems, fully aumated assembly lines, standardised assembly cells up partially aumated reliable manual work stations we offer an enormous range of aumation solutions for the most varied of industries: Screwdriving and assembly systems for efficient aumatic production. DEPRAG - Your one sp shop, we take full responsibility for your complete system! Take a look at our capabilities and range from numerous application examples andcusmer references! one sp shop reliable efficient economical high level of reusability Electronics industry, information technology and telecommunication Aumobile industry Vehicle manufacture, Aircraft manufacture Household goods Medical technology Tool manufacture Sanitation technology Food industry Machine construction etc. Application examples The Gantry Screwdriving Cell: Suitable for larger work areas (up 2.0 m x 1.5 m / 6.6 x 5.0 ft.), a gantry style screw-driving cell can be equipped with several individual screwdriving stations. These robotic screwdrivers can be used in individual workstations or in a conveyor-integrated system. The complete Assembly Cell When looking for assembly tasks beyond screwdriving, DEPRAG offers complete assembly cells that can include welding, coil-winding, etc. Such a station will include all necessary feeding, handling, pick & place, as well as the complete control functions.

23 STANDARDISED ASSEMBLY SYSTEMS 23 Screwdriving, labelling, palettising, clipping, pressing in, laser engraving, ultrasonic welding, testing, gluing... DEPRAG assembly modules enable the low-cost realisation of numerous functions. We make use of our modular system in the creation of your assembly cells: DCAM DEPRAG COMPACT ASSEMBLY MODULE The compact machine system with standardised base structure and integrated positioning and sequence controller. FULLY EQUIPPED MANUAL WORK STATIONS Smart Work Benches" combine manual handling with processing reliability equal aumatic production. DEPRAG has a comprehensive range of sophisticated standard modules which are used create precise, economical, and ergonomic manual work stations. These tried and tested components which can be combined make a system of high reliability, allow flexible worker changeover without sacrificing quality. Please find more informations in our brochure D3390E.

24 24 MACHINE BUILDING COMPONENTS Controller technology CONTROL system and process controller DCOS (Deprag controller system) The controller system DCOS (DEPRAG CONTOLLER SYSTEM) is designed fulfil the highest requirements. It is particularly user friendly and has high functionality. The DCOS controls, records, documents and analyses. Control and operating unit Control cabinet The integrated networkability enables unproblematic connection SCADA and MES systems, optimal data administration and srage and above all, the access common PC applications such as browsers, data back-up and remote access opens up almost infinite user possibilities. A DCOS consists of: the control and operating unit the control cabinet and standardised software packages Control unit DPU DPU010 (C) DPU050 DPU100 DPU200 DEPRAG Processing Unit The DPU series controllers are based on an industrial PC. The compact controllers DPU010, DPU050, DPU100 run on the Windows CE operating system whereas the DPU200 uses Windows XP. The DPUs control complex motion sequences with extremely short cycle times (typically < 6 ms). A colour uch screen with VGA resolution (except on the DPU010) enables high level user comfort in the operation and display of operating conditions. Two USB ports allow the user connect additional peripheral devices with ease. The DPU can access the company network or world wide web via the freely accessible Ethernet port. Control cabinet DSEC DSEC10 DSEC20 DSEC30 DSEC40 DEPRAG Safety Extension Controller As well as the DPU a control cabinet such as DSEC10, DSEC20, DSEC30 or DSEC40 is used, depending on the control task. These each contain 32 digital inputs and outputs which are connected the DPU via the modern Ethercat field bus. A 24V DC voltage supply is already integrated in the DSEC supply the control components (DPU, sensors and actuars etc.). To meet the safety function requirements the DSEC10 and DSEC20 both include two inbuilt safety relays. Both control cabinets DSEC30 and DSEC40 are equipped with freely programmable compact safety controllers enabling highly complex safety functions. Software Packages DFUN DVIP DPRO DAST DSPEC DFUN10 Part no DPRO10 Part no DFUN50 Part no DVIP50 Part no DPRO50 Part no DFUN100 Part no DVIP100 Part no DPRO100 Part no DAST100 Part no DFUN200 Part no DVIP200 Part no DPRO200 Part no DAST200 Part no The basic software pack- The software package for This software package The software-panel for EC age regulates the functions visualisation and position- supports the process and EC Servo Systems. of your system coming. control through BDE, DAST is used supervise ponents. Operar guidance on the MDE and MES connectionszation the operation and visuali- The functionality matches positioning control necesthe of the screwdriver performance capability sitates processing and The functionality matches sequence controller (AST of the relevant system sequencing visualisation. the performance capabi- series) through the sys- control. The functionality matches lity of the relevant system tem control. the performance capability control. The functionality matches of the relevant system the performance capabi- control. lity of the relevant system control. Part no. based upon order For the regulation of cusmer specific applications. DSPEC is required when actions and functions are used which are not covered by the software packages DFUN, DVIP and DPRO. Feeding technology Page 20 / 21 Measuring Technology Page 17 Please find more informations in our brochure D3350E.

25 MACHINE BUILDING COMPONENTS 25 Screwdriving function module Screwdriving function module for aumated screw assembly Screwdriving function modules make up the base for every reliable, aumated screw assembly. You also profit from our many years of experience in screwdriving technology and assembly aumation. We offer both single spindle and multi-spindle units. Wide variety for all applications DEPRAG screwdriving function modules are extremely varied. For every application we have a suitable solution. For example our designs span a large rque range and single or multi-spindle units are available in various forms. The modular designs of our screwdriving units are based on six different standard forms: Normal slim design for horizontal screw assembly or assembly from above Short design for tight working spaces Under floor design for vertical screw assembly from below Vacuum design for difficult access or recessed screw positions in any screw direction Pick & Place design for connection elements with defined pick position Nut design for aumatic feeding and assembly of nuts Screwdriver Spindles Page 14 / 15 / 16 Please find more informations in our brochure D3310E.

26 26 AIR MOTORS Air mors are safe and robust drive systems which come in play when a resilient, overload-safe, high performance drive is required. Always ready for action long after traditional drive technologies have spped rotating. Advantages: explosion proof high longevity service-friendly stainless steel compact sterilisable A wide range of mors is available, such as oil-free, fully sealed, cleaning agent resistant mors for use in the food industry; sterilisable mors for medical technology; mors for use under special conditions such as the resilient drain milling robot drive; and our ATEXconform complete system of air mor - holding brake - gearing for use in potentially explosive environments. We will find the safest and most economical drive solution for your individual application, whether it is an air mor from our catalogue or a complex system solution. PRODUCT SPECTRUM Air vane mors BASIC LINE ADVANCED LINE POWER LINE INDIVIDUAL LINE Drill mors, Milling mors, Grinding mors Mors with integrated holding brake Speed regular Turbines Turbine production according your specific application Innovative turbine generar: Harnessing power from small amounts of process gas Accessories Tooth-gear mors Tooth-gear mors can be individually designed according your requirements. Innovative system solution offset speed fluctuations. Maintenance units, special oil, pressure hoses, silencer, pressure regular valves, etc. can be found in our product catalogue D3340 E. AIR VANE MOTORS BASIC LINE Our great value for money model for use in non-critical production environments. Additional benefit: You save production time with our patented vane exchange system! Power range: W Your advantages: ATEX certified patented vane exchange system wide speed range reversible robust design D6200E ADVANCED LINE Our product line of stainless steel mors stands out from the rest with its comprehensive range of sealed, oil-free operable, non-corrosive air mors. Particularly suitable for use in the paper industry, food processing industry, for medical tech nology and much more Power range: W Your advantages: ATEX certified non-corrosive oil-free operable sealed reversible integrated holding brake design high performance, small size D6400E

27 AIR VANE MOTORS 27 Our product line of high performance bracket and flange mors also features wide versatility. The high starting rque with an unparalleled low performance weight, the robust and reliable design are all clear advantages in comparison with an electric drive. Power range: kw Your advantages: ATEX certified high performance high starting rque low performance weight robust, reliable design long life-span D6600E POWER LINE Individual cusmisation Great value cusmisation based on our modular principle, from individually designed mors cusmer specific package deals, up complete system solutions. Your advantage: attractive price-performance ratio INDIVIDUAL LINE AIR VANE MOTORS FOR SPECIAL APPLICATIONS Our efficient drill mors with slim design allow the smallest of drill spacings when using multi-spindle units, such as for the construction of windows. Our durable milling mors are particularly suitable for robot applications: space saving and high performance with high speed ranges. Our grinding mors programme offers the advantages of the reliable handheld DEPRAG air grinding machines as an integrated version for your machine. The robust steel housing guarantees high precision and operational safety. Power range: W Speed range: ,000 rpm Your advantages: high precision drill chuck with taper fitting D6800E Power range: 400 W Speed range: max. 20,000 rpm Your advantages: robust and precise bearing high running precision D6800E Power range: W Speed range: 15,300-47,000 rpm Your advantages: high precision collet for various shaft diameters high running accuracy D6800E Drill Mors Milling Mors Grinding Mors

28 28 AIR VANE MOTORS Mors with integrated holding brake The great value complete solution: Cusmers benefit from our standard program of vane mors with integrated brake equipment. Available for the series 67 and 68 from 200 W 3.6 kw. Advantage of planetary gears: effective holding of a large centrifugal mass aumatic brake by pressure drop drive spindle can be held in position without air consumption D6400E / D6600E Gear Mors Due the high speeds of air mors, gears are often necessary for speed adjustment when used in a machine. DEPRAG saves systems construcrs the time and effort of laborious design work and interface adaptation between gears and air mor. Our range already consists of a variety of standard mors with high quality integrated gears at a favourable price-performance ratio. If you cannot find a suitable air mor in our catalogue we also offer several low-cost combinations of air mors and gears. Advantages of planetary gears: compact design high degree of efficiency optional installation position gear ratio 5-50 Advantages of spur gears: good value for money gear ratio: optional (i = 7-238) Advantages of worm gears: good value for money compact design high gear ratio possible in one step from self-locking TURBINES Our turbines are energy efficient, high speed drives which are suitable for continuous use and have an optimal performance weight and guarantee low air consumption. Each turbine is fluid-dynamically designed, calculated and individually produced specific your application. Function of a turbine Turbines are turbo machines which can be designed be single level or multi-level. The transformation of pressure energy in kinetic energy happens in the entry jet. On a two level turbine the largest part of the kinetic energy is transferred the first ror disc. The air flow is diverted over the fixed ror disc. The remaining energy is transferred the second ror disc. guide wheel jet nozzle air flow 2nd ror disc 1st ror disc The turbine does not need any tangential sealing. Operation of the turbine with oil-free air is therefore completely wear free. Turbo machines optimally use the energy of pressurised air. This reduces the air consumption by a third in comparison with an air mor. The performance weight [kilos/kw] is only half as big. Application examples of our turbine drives Application of turbines for energy reclamation Our turbine generar enables power be reclaimed from small amounts of process gas. With a small investment you can turn used energy in hard cash! Application of turbines for aircraft emergency exits A pyrotechnic ignition indirect turbine drive with reduction gear in PYROTAK emergency door activar provides high power density in a small package.

29 TOOTH-GEAR MOTORS 29 Our oth-gear mors provide made--measure drive solutions for your individual application needs. Function of the Tooth-Gear Mor Tooth-gear mors consist of two oth wheels which turn with little play within a housing. One wheel is connected rotate with the drive shaft, the other generates rque. Force is exerted on two flanks in the turn direction and one flank against the turn direction. Exhaust air builds up in chambers between the oth flanks and housing wall, then is guided the exhaust side and rotational movement is generated. force exerted on fl ank in turn direction exhaust inlet force exerted on fl ank against turn direction Structure of a Tooth-Gear Mor Seal plate Tooth wheels Bearing needle Mor housing DEPRAG oth-gear mors are oil-free operated. SPEED REGULATOR Innovative system solution offset speed fluctuations. universally applicable due parameter options wide range up 80,000 1/min precise, high resolution controller ACCESSORIES designed for DEPRAG air mors service friendly economical Maintenance units, special oil, pressure regular valves, pressure hoses, hose clamps and connecrs can be found in our product catalogue D3340E. You can find the compatible silencer for your air mor in our mor catalogues. Compatible valves for the reversal and speed regular can be purchased from any valve manufacturer.