Siemens Centre of Excellence Course Plan
|
|
- Audrey Robinson
- 5 years ago
- Views:
Transcription
1 Siemens Skill Development Initiatives Industry Relevant Skill Development Program for Gujarat Siemens Centre of Excellence Course Plan Page 1
2 Table of Contents Labs in the Siemens COE... 3 Courses offered at Centre of Excellence Product and Validation Lab Advanced Manufacturing Lab Instrumentation Lab Automation Lab Electrical Lab Mechatronics Lab Machine Lab Siemens Certification Page 2
3 Labs in the Siemens COE S. No. Lab Nos. Batch Strength 1. Product and Validation Lab Advanced Manufacturing Lab Automation Lab 1 4 Electrical Lab 1 5 Control Lab 1 6 Mechatronics Lab 1 7 Machine Lab 1 Page 3
4 Courses offered at Centre of Excellence 1.1 Product and Validation Lab S.No Domain Course Name Hours Mandatory Prerequisite Optional 1 CAD ers 40 None 2 CAD NX Basic None 3 CAD 4 CAD 5 CAD 6 CAD 7 CAD Fundamentals and Parametric Intermediate NX and Assemblies Drafting Essentials Mechanical Freeform 8 ers ers 40 ers 40 8 CAD NX Sheet Metal 9 CAD Routing Electrical ers/nx Basic ers Intermediate NX and Assemblies ers Intermediate NX and Assemblies ers Intermediate NX and Assemblies onous and Parametric onous and Parametric onous and Parametric onous and Parametric 10 CAD Routing Page 4
5 S.No Domain Course Name Hours Mandatory Prerequisite Optional 11 CAD 12 CAD Mechanical Large Assemblies Management Industrial using NX 13 CAD PCB Exchange 8 14 CAD 15 CAD CAE 17 CAE 18 CAE Sketching Fundamentals Product and Manufacturing Information Motion Simulation Advanced Simulation Introduction to Finite Element 32 8 ers Intermediate NX and Assemblies ers Intermediate NX and Assemblies Mechanical Freeform ers Intermediate NX and Assemblies Mechanical Freeform ers Intermediate NX and Assemblies Routing Electrical designers/nx Basic Drafting Fundamentals ers Intermediate NX and Assemblies Mechanical Freeform ers/nx Basic ers/nx Basic ers/nx Basic onous and Parametric onous and Parametric onous and Parametric onous and Parametric onous and Parametric Page 5
6 S.No Domain Course Name Hours Mandatory Prerequisite Optional 19 CAE 20 CAE 21 CAE 22 CAE 23 CAE CAE Analysis with NX Advanced simulation Solutions Thermal and Flow analysis NX Response Simulation Laminate Composites NX Nastran Advanced Nonlinear Sensitivity and optimization with NX 8 ers/nx Basic ers/nx Basic ers/nx Basic ers/nx Basic ers/nx Basic Introduction to finite element analysis with NX ers/nx Basic Introduction to finite element analysis with NX NX Nastran Advanced Non-linear Page 6
7 S.No Domain Course Name Hours Mandatory Prerequisite Optional 25 CAE 26 CAE 27 CAE 28 CAE 29 CAE Super Element Analysis with NX Advanced Thermal and Flow Analysis Advanced Dynamic Analysis with NX Introduction to Dynamic Analysis with NX DDAM analysis with NX 30 CAD Mold Wizard 40 8 ers/nx Basic Introduction to finite element analysis with NX ers/nx Basic & Thermal and Flow Analysis ers/nx Basic NX Response simulation ers/nx Basic Introduction to finite element analysis with NX ers/nx Basic Introduction to finite element analysis with NX Introduction to Dynamic Analysis using NX Advanced Dynamic Analysis using NX ers Intermediate NX and Assemblies Mechanical Freeform NX Nastran Advanced Non-linear onous and Parametric Page 7
8 S.No Domain Course Name Hours Mandatory Prerequisite Optional 31 CAD Progressive Die wizard 40 ers Intermediate NX and Assemblies Mechanical Freeform NX Sheet Metal onous and Parametric 1.2 Advanced Manufacturing Lab S. No. Domain Course Name Hours Mandatory Prerequisite Optional 32 CAM 33 CAM 34 CAM 35 CAM 36 CAM 37 DM NX Manufacturing Fundamentals Turning Manufacturing Fixed Axis and Multi-Axis Milling NX CAM Customization Post Building Techniques er Basic None ers/nx Basic ers/nx Basic NX Manufacturing Fundamentals ers/nx Basic NX Manufacturing Fundamentals ers/nx Basic NX Manufacturing Fundamentals ers/nx Basic NX Manufacturing Fundamentals NX CAM customization Page 8
9 S. No. Domain Course Name Hours Mandatory Prerequisite Optional 38 DM 39 DM 40 DM 41 DM 42 DM 43 DM 44 DM 45 DM Simulate Part Flow Simulate Human Simulation Simulate Basic Robotics er for General Assembly Variant Definition and Application er for Body-In- White ing Simulate Intermediate Robotics Simulate Advanced Robotics Simulation 32 Introduction to Teamcenter Using Teamcenter 40 Introduction to Teamcenter Using Teamcenter 40 Introduction to Teamcenter Using Teamcenter er Basic er Basic 8 er Basic 32 Simulate Basic Robotics 46 DM RobCAD Basics 47 DM RobCAD Spot RobCAD Basics 48 DM RobCAD Paint RobCAD Basics 49 DM RobCAD Arc RobCAD Basics 50 DM RobCAD Adv Modelling & Kinematics 51 DM RobCAD OLP Simulate Basic Robotics Simulate Intermediate Robotics er Basic designer for General Assembly er for BIW processing RobCAD Basics RobCAD spot RobCAD Basics RobCAD Spot RobCAD Paint RobCAD Arc Variant Definition and Application Page 9
10 S. No. Domain Course Name Hours Mandatory Prerequisite Optional 52 DM 53 DM 54 DM 55 PLM 56 PLM Plant Simulation Methods, and Strategy Plant Simulation Adv Modelling Plant Simulation 3D Visualization Using Teamcenter Introduction to Teamcenter None 8 None 57 PLM Mockup None 58 PLM 59 PLM 60 PLM 61 PLM 62 PLM 63 PLM Integration for NX users Schedule Manager Managing Requirements using Teamcenter Manufacturing Assembly Planning Manufacturing Assembly Part Planning Managing Systems using Tc RobCAD Adv Modelling and Kinematics Simulate Human Simulation Simulate Basic Robotics, Simulate Intermediate Robotics Simulate Advanced Robotic Simulation Plant Simulation Methods, and Strategy Plant Simulation Methods, and Strategy 8 Introduction to Teamcenter Introduction to Teamcenter Introduction to Teamcenter Introduction to Teamcenter 8 Introduction to Teamcenter Introduction to Teamcenter Managing Requirements using TC 64 PLM Installation 40 Introduction to Page 10
11 S. No. Domain Course Name Hours Mandatory Prerequisite Optional 65 PLM Application and Data Model Administration PLM Customization PLM Advanced Workflow and Security Admin Teamcenter Using Teamcenter Introduction to Teamcenter Using Teamcenter Using Teamcenter Application and Data Model Administration Using Teamcenter Application and Data Model Administration 1.3 Instrumentation Lab S.No Domain Course Name Hours Curriculum Prerequisites 1 2 Instrumenta tion Instrumenta tion Basic of Instrumentation 50 SIMATIC PCS 7 Basics 50 FLOW measurement LEVEL measurement PRESSURE Measurement TEMPERATURE Measurement ELECTROPENUMATIC POSITONER Introduction to standard architecture of PCS 7. Introduction to Automation System Hardware. Working with SIMATIC Manager in PCS 7 way. Creating the project and Configuring Hardware s (AS & OS). Working with Plant Hierarchy. Electrical, Electronics, Mechanical, Instrumentation engineers (2 nd year completed) Electrical, Electronics, Mechanical Instrumentation engineers (2 nd year completed) Page 11
12 1.4 Automation Lab S. No. Domain Course Name Hours Curriculum Prerequisites 1 Automation Basics of PLC 50 2 Automation Basic Scada 50 Constituents of PLC, How PLC Work, SIMATIC S7-PLC Introduction to HMI STEP 7 blocks and structured programming Using Data Blocks. Use of Organisation Blocks System overview of SIMATIC WinCC Graphics er and graphics displays for human machine interfacing User Administration Background processing (introduction of Global Scripts) Report er for logging (introduction) Electrical, Electronics, Mechanical, Instrumentation engineers (2 nd year completed) Electrical, Electronics, Mechanical, Instrumentation engineers (2 nd year completed) Page 12
13 1.5 Electrical Lab S.No Domain Course Name Hours Curriculum Prerequisites 1 Electrical 2 Electrical 3 Electrical Basic Course on Ac - Dc Drives Basic Power Systems Basics of Induction Motors DC Motor Basics, DC Drives Basics, Siemens DC Drives (6RA80), AC Motor Basics, AC Drives Basics, AC Drives (Sinamics S & G)-Ratings, MEDIUM VOLTAGE, MV Transformers Basic Of power distribution Philosophy of Generation, distribution in LV, MV & HV Types of network Faults & Fault level calculations Basic Of protection Types of Fault Basics of Electricity Efficiency of induction motor- Various losses in the induction Product spectrum of Siemens motor. Advance control of induction motor-simocode overview Speed Torque Characteristics, Effects of supply variations over the motor performance Electrical, Electronics, Mechanical Instrumentation engineers (2 nd year completed) Electrical, Electronics, Mechanical Instrumentation engineers (2 nd year completed) Electrical, Electronics, Mechanical Instrumentation engineers (2 nd year completed) 4 Electrical Low Voltage Switch gear 40 Simaris Curve simulation Low Voltage offerings in Power Distribution in Industry today DIN Fuse Importance of fuses Overview of Pac meter Overload Relay, Microprocessor Relay Electrical, Electronics, Mechanical Instrumentation engineers (2 nd year completed) Page 13
14 1.6 Mechatronics Lab S.No Domain Course Name Hours Curriculum Prerequisites 1 Mechatronics Basic Mechatronics 50 Introduction to the module, Fundamentals of Electrical Components, Mechanical Components, Pneumatic Components, Interpretation of Technical Documents, Electrical, Electronics, Mechanical, Instrumentation engineers (2 nd year completed) Digital Fundamentals & PLC 1.7 Machine Lab CIM Lab S.No Domain Equipment Hours Curriculum 1 Computer Integrated Manufacturing FLEXTURN-Siemens 828D Introduction to Turning center Overview of Siemens 828D Key board and Screen layout Overview of different operating areas Overview of different modes Cutting tools and parameter selection Introduction to part programs and structure Overview of G and M codes Programming on Siemens standard cycles Hands on practical -Tool offset Hands on practical All standard cycles Overview of CIM interface Basic preventive maintenance FLEX TURN 2 Computer Integrated Manufacturing FLEXMILL- Siemens 828D Introduction to Machining center Overview of Siemens 828D Key board and Screen layout Overview of different operating areas Overview of different modes Cutting tools and parameter selection Introduction to part programs and structure Overview of G and M codes Programming on Siemens standard cycles Hands on practical -Work offset and Tool offset Hands on practical All standard cycles Overview of CIM interface Page 14
15 S.No Domain Equipment Hours Curriculum Basic preventive maintenance FLEXMILL 3 Computer Integrated Manufacturing Aristo Robot 6 axis 8 Introduction to Robotics Overview of M-Robot Software Robot online programming Hands on practice Materiel handling applications CIM Interface ASRS Hands on practice Manual mode Hands on practice -CIM mode Assembly Station Hands on practice Manual mode Hands on practice -CIM mode 4 Computer Integrated Manufacturing Vision Inspection sensor AGV Overview of vision software Preparation of Inspection programs CIM Interface Hands on practice Manual mode Hands on practice -CIM mode CIM software Overview of CIM software CIM offline programming CIM Online programming Interfacing of Work cell equipments Execution of CIM system Various sequence of operations CNC Lab S.No Domain Course Name Hours Curriculum Prerequisites History of CNC Definition of CNC NUMERICALLY CONTROLLED M/C TOOLS Mechanical engineers(2 nd year completed) CNC TURNING MACHINE CNC MILLING MACHINE 1 Manufacturing Basics of CNC machines 50 CNC LASER CUTTING CNC PLASMA CUTTING CNC PRESS CNC RAPID PROTOTYPING Mechanical elements of CNC machines MACHINE CONTROL UNIT PES of CNC CONTROL SYSTEMS Page 15
16 S.No Domain Course Name Hours Curriculum Prerequisites STEPPER MOTORS Servo motors ISO MACHINE TOOL AXIS DEFINITION Axis nomenclature Right hand thumb rule Mechanical engineers (2 nd year completed) Rotational and additional axes Right hand rule - Vertical Machine & Horizontal Machine Part programming structure G Codes N Codes 2 Manufacturing NC- Numerical control programming 50 X, Y, and Z Codes Explanation of letters in CNC programming Rapid traverse movement G00 Introduction of standard TURNING cycles Introduction of standard MILLING cycles Introduction of standard DRILLING cycles Introduction of special commands in programming Basic concepts, mechanical systems for electronics engineer Drives Spindle drives Electrical and Electronics engineers(2 nd year completed) 3 Manufacturing Basics of CNC Machines 50 Feed Drives DC Motors Servo Principle Drive optimization Wiring of electrical cabinets Power supply for CNC machines Page
17 Page 17
18 Siemens Certification On successful completion of course and assessment, a student will be issued a Siemens Certificate. A sample layout of the certificate is as follows: Page 18
Universal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) Milwaukee School of Engineering Applied Technology Center TM Department of Professional Education The UFPT is a modular, smart and unique fluid power and motion control
More informationUniversal. CNC Turning machine TNA500 TNA600
Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time
More informationUniversal Fluid Power Trainer (UFPT)
Universal Fluid Power Trainer (UFPT) The UFPT is a modular, smart and unique fluid power and motion control training unit. It contains an excellent integration of industrial-graded hardware and builtin
More informationConverting Applications Made Easy Presented by Jeff Reese Manufacturing in America March 14-15, 2018
Converting Applications Made Easy Presented by Jeff Reese Manufacturing in America March 14-15, 2018 Before we start A Penny for Your Thoughts At the end of the session, share your feedback via MiA App
More informationpl & PL-C Series plasma DURMA
pl & PL-C Series plasma Better Parts Better profits PL Series plasma PL-C PL standard equipment Independent Zoned & Partitioned Table Hypertherm Automatic Gas Console Siemens AC Digital Servo Motors Rack
More informationGUI Customization with Abaqus. Abaqus 2017
GUI Customization with Abaqus Abaqus 2017 About this Course Course objectives The goal of this course is to train you to use the Abaqus GUI Toolkit to customize the Abaqus/CAE interface or build your own
More informationCrashworthiness Analysis with Abaqus
Crashworthiness Analysis with Abaqus 2017 About this Course Course objectives This course covers: Abaqus fundamentals and input syntax General "automatic" contact modeling Element selection for crash simulation
More informationCNC swiss and non-swiss. turning center TNL32
CNC swiss and non-swiss turning center TNL32 Thanks to the outstanding technical features of the TRAUB TNL32 CNC swiss and non-swiss turning center, you will notice measurable improvements in production.
More informationE[M]CONOMy. means: Not just training: Real action! CONCEPT MILL 260. CNC training with industrial performance
[ E[M]CONOMy ] means: Not just training: Real action! CONCEPT MILL 260 CNC training with industrial performance Concept MILL 260 The new Concept Mill 260 combines all benefits of the proven CM 250 with
More informationSupply & Installation of Latest Version NX CAD Academic Software (NX9)
ISO 9001:2008 TENDER FOR Supply & Installation of Latest Version NX CAD Academic Software (NX9) Tender Inquiry No. NSIC/NTSC/CAD/CAM/CNC/UG- NX Software/051/15-16 NSIC- Technical Services Centre (A Government
More informationMTAB. MACHINING CENTERS
MTAB www.mtabcnc.com MACHINING CENTERS OVERVIEW MTAB's Vertical Machining Center is designed to flex with the customers' manufacturing demands and requirements. The machines are high performance systems,
More informationMECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL. (09 January 2016)
MECHANICAL ENGINEERING (School of Mechanical Sciences) AGENDA NOTES Submitted to ACADEMIC COUNCIL (09 January 2016) Sl. No. Table ME- 1 B.Tech. (Mechanical Engineering) - 2015 Batch onwards Code COURSE
More informationFriday Midterm EXAMINATION Fall 2018 CREDIT HOURS ENGINEERING PROGRAMS AIN SHAMS UNIVERSITY FACULTY OF ENGINEERING
HUM311 Engineering Management 176 HUMN362 Engineering Management 1 14:00 16:00 224, 261 CEP 011 Engineering Drawing (2) 247 14:00 16:00 901, 901A, 902A, 902B,904, 250 Friday 9-11-2018 PHM022 Waves, Electricity,
More informationCNC universal machining centre DMU 50 DMU 50 The 3 rd generation DMU: even better and more powerful!
www.dmgmori.com CNC universal machining centre The 3 rd generation DMU: even better and more powerful! Applications and Parts Machine and Technology Control Technology Technical Data Compact universal
More informationeven better and more powerful!
CNC UNIVERSAL MACHINING CENTRE THE 3 rd GENERATION DMU even better and more powerful! DMGMORI.COM Applications and Parts Machine and Technology Control Technology Technical Data Compact universal machining
More informationSIMOTICS Active Magnetic Bearing Technology
Ingenuity for Life Driving the Digital Enterprise SIMOTICS Active Magnetic Bearing Technology Intelligent bearing technology on a proven basis Basic principle of Active Magnetic Levitation I S Electromagnet
More informationDevelopment test stands for E-motors
Development test stands for E-motors Standardized design for DC and EC/BLDC motors imc DCcompact & imc ECcompact standard test stands are well-proven and quickly available. imc productive testing www.imc-berlin.com/electric-motor-testing/
More informationEAL Level 3 NVQ Extended Diploma in Electrical and Electronic Engineering (QCF) 600/9931/8
Rule of combination (qualification structure) Structure of the EAL Level 3 NVQ Extended Diploma The Extended Diploma is comprised of a Level 3 Engineering Qualification extended by inclusion of technically
More informationSALES PRESENTATION FOR RELAYS, CONTACTORS & MOTOR STARTER TESTING EQUIPMENTS
SALES PRESENTATION FOR RELAYS, CONTACTORS & MOTOR STARTER TESTING EQUIPMENTS Relay Test Bench: LIST OF TEST EQUIPMENT 1. FIVE STATION BIMETAL OVERLOAD RELAY TEST BENCH 2. TWENTY FOUR STATION RELAY HEATING
More informationIII EC6362 ELECTRONIC CIRCUITS AND DIGITAL LABORATORY
Sl No Faculty of Mechanical Engineering BE Robotics and Automation (R 2013) Semester III EC6362 ELECTRONIC CIRCUITS AND DIGITAL LABORATORY 1 0 30V RPS 12 2 0 50V RPS 2 3 0 5V RPS 2 4 0 30V Voltmeter 10
More informationEUROPE CANADA & USA www bender com
EUROPE TST Bender sold and serviced by Process automation CANADA & USA TST Bender sold and serviced by TUBEX TECHNOLOGY MACHINERY (2010) INC. Administrative office 210A, Brunswick, Pointe Claire (Montreal)
More informationMultimove. IRC5 has enough goodies for everyone. Which one is your favorite? Powerful Software Tools. Modular Controller.
The new robot controller has enough goodies for everyone. Which one is your favorite? Powerful Software Tools Multimove Modular Controller Easy-to-use Graphical FlexPendant Network capabilities 30 sets
More informationAutomotive NVH with Abaqus. Abaqus 2018
Automotive NVH with Abaqus Abaqus 2018 About this Course Course objectives Upon completion of this course you will be able to: Perform natural frequency extractions Perform sound radiation analyses (acoustics)
More informationSOLUTIONS PARTNERS ammc.com MOTION & PLC MECHANICAL AUTOMATION CONTROL MOTORS DRIVES ROBOTICS HMI & PC SENSING SAFETY
SOLUTIONS PARTNERS ammc.com APPLIED MACHINE & MOTION CONTROL 25 + YEARS IN MOTION MOTION & PLC SINGLE & MULTI-AXIS MOTION SYSTEMS, PLCs, PACs, CNCs MECHANICAL GEARING, SCREWS, COUPLINGS, STAGES, ACTUATORS
More informationPrecision meets innovation custom-made assembly systems
Precision meets innovation custom-made assembly systems bwm line concept bwm assembly lines enable different versions of complex components to be produced, with the option of increasing component variety
More informationComposites Modeler for Abaqus/CAE. Abaqus 2018
Composites Modeler for Abaqus/CAE Abaqus 2018 About this Course Course objectives In this course you will learn about: Composites Modeler for Abaqus/CAE, an add-on product to Abaqus/CAE How to use Composites
More informationTire Analysis with Abaqus: Advanced Topics
Tire Analysis with Abaqus: Advanced Topics 2017 About this Course Course objectives Topics covered in this course include: Steady-state rolling using Eulerian techniques in Abaqus/Standard Hydroplaning
More informationForce Control for Machining applications. With speakers notes
Force Control for Machining applications Robotics - 1 May 2007 Contents Introduction Project objectives, execution and result Features, benefits and technical solutions FC Pressure FC SpeedChange Graphical
More information5 AXIS CNC WELD PREPARATION MACHINE HIGH-PERFORMANCE CNC PLASMA CUTTING
metaltek PORTABLE CNC ENGINEERING SOLUTIONS metaltek PORTABLE 5 AXIS CNC WELD PREPARATION MACHINE HIGH-PERFORMANCE CNC PLASMA CUTTING Manufactured in Australia by Metaltek is a wholly owned subsidiary
More informationModern Industrial Pneumatics. Design and Troubleshooting Industrial Pneumatics PN111 PN121
Modern Industrial Pneumatics Design and Troubleshooting Industrial Pneumatics PN111 PN121 Drives: Cylinders for different drive purposes Valves: Various valve types (pneumatically/electrically controlled,
More informationMechatronics systems
Mechatronics systems www.matrixtsl.com 1 HP4550 Solution Description This solution contains products from our Locktronics, E-blocks and Automatics ranges. The pack includes a wide variety of resources
More informationAdvanced Abaqus Scripting. Abaqus 2018
Advanced Abaqus Scripting Abaqus 2018 About this Course Course objectives Help students to develop a high level understanding of the Abaqus scripting capabilities and gain some proficiency. Organize and
More informationEASY-MASTER PRO-MASTER DYNESTIC 7515 / G DYNESTIC The perfect nesting technology CNC machining centers Your Partner for Precision
EASY-MASTER PRO-MASTER DYNESTIC 7515 / 7516 7521 G DYNESTIC 7515 7516 The perfect nesting technology CNC machining centers Your Partner for Precision and Productivity Spezialmaschinen DYNESTIC 7515 7516
More informationAir Circuit Breakers
Siemens AG 203 /2 Introduction 3WL air circuit breakers/ non-automatic air circuit breakers up to 6300 A (AC), IEC /8 Introduction /9 3-pole, fixed-mounted versions /6 3-pole, withdrawable versions /23
More informationPoints of strength. 63F, availability of two drilling heads, with possibility fo horizontal and vertical drilling devices.
CNC GIOTTO 1 Points of strength Technology EASY USE, easy to use and simple to MOUNT TOOLS Machine ready for use and complete with standard tool support store and CAD station Suction cups made of aluminium
More informationExtraordinary Value & Performance Since 1986, Techno, has provided economical CNC cutting solutions. The new HDS Series promises to follow suit.
The HDS CNC Router is manufactured using global state-of-the-art techniques with advanced engineering and workmanship and built to last with all steel construction and superior components such as precision
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationIntroduction to Abaqus Scripting. Abaqus 2018
Introduction to Abaqus Scripting Abaqus 2018 About this Course Course objectives Help students to develop a high level understanding of the Abaqus scripting capabilities. Organize and present the technical
More information4-Day Power System Analysis, Coordination, System Studies
4-Day Power System Analysis, Coordination, System Studies Contact us Today for a FREE quotation to deliver this course at your company?s location. https://www.electricityforum.com/onsite-training-rfq Our
More informationMAVERICKCNC MV SERIES
YOUR CUTTING EDGE MAVERICKCNC MV SERIES CNC PLASMA CUTTING TABLES PICK YOUR POISON AVAILABLE PLASMA CUTTERS + Powermax 65, Air, 65A + Powermax 85, Air, 85A + Powermax 105, Air, 105A + Powermax 125, Air,
More informationCNC Double Column Machining Center. SDV-H Series SDV Series.
CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear
More informationIntroduction to Abaqus/CAE. Abaqus 2018
Introduction to Abaqus/CAE Abaqus 2018 About this Course Course objectives Upon completion of this course you will be able to: Use Abaqus/CAE to create complete finite element models. Use Abaqus/CAE to
More informationUniversal basic turning centres for a broad range of manufacturing CLX series CLX 350 CLX 450
www.dmgmori.com CLX 350 CLX 450 Universal basic turning centres for a broad range of manufacturing Machine highlights Modularity Ì Technology and applications Ì Customization and solutions Ì Control technology
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationContents INTRODUCTION...
INTRODUCTION... xiii CHAPTER 1. FROM THE SYSTEM TO THE SOFTWARE... 1 1.1. Introduction... 1 1.2. Command/control system... 2 1.3. System... 6 1.4. Software application... 8 1.4.1. What is software?...
More informationAWEA MECHANTRONIC CO., LTD. AGENT ISO 9001 ISO 14001
AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 305, Taiwan TEL : +886-3-588-5191 FAX : +886-3-588-5194 Website : www.awea.com CENTRAL TAIWAN SCIENCE
More informationFaster project implementation. Earlier return on invest. SIMOTICS HV M shaft height 450 to 800: the modular motor concept up to 19 MW
Faster project implementation. Earlier return on invest. SIMOTICS HV M shaft height 450 to 800: the modular motor concept up to 19 MW siemens.com/simotics-hv-m Value added in plant engineering: modular
More informationLinMot Industrial Linear Motors LinMot linear motors are direct electromagnetic drives. The linear motion is generated without wear, with no intermedi
Industrial Linear Motors Purely electrical drive system Freely positionable along the entire stroke For precise and dynamic positioning tasks Linear motor technology provides longer life IP67 protection
More informationForce Control for Machining Applications
Bernd Kuhlenkötter Head of Product Management & Technology 10.01.2008 Force Control for Machining Applications Robotics - 1 July 2007 Facts about ABB Robotics - 2 October 2007 Headquarters: Zurich, Switzerland
More informationDESIGN DEVELOPMENT ENGINEERING TECHNOLOGY INDUSTRIALIZATION
COMPANY INTRODUCTION DESIGN DEVELOPMENT ENGINEERING TECHNOLOGY INDUSTRIALIZATION Lukas Stary February 7, 2017 LUSTACO Group www.lustaco.com February 7, 2017 1 OUTLINE BASIC DESCRIPTION STYLING & DESIGN
More informationSOLUTIONS PARTNERS 20 + YEARS IN MOTION APPLIED MACHINE & MOTION CONTROL MOTION & PLC MECHANICAL AUTOMATION CONTROL MOTORS DRIVES ROBOTICS HMI & PC
SOLUTIONS PARTNERS ammc.com APPLIED MACHINE & MOTION CONTROL 20 + YEARS IN MOTION MOTION & PLC SINGLE & MULTI-AXIS MOTION SYSTEMS, PLCs, PACs, CNCs MECHANICAL GEARING, SCREWS, COUPLINGS, STAGES, ACTUATORS
More informationAir Circuit Breakers
Siemens AG 204 /2 Introduction 3WL air circuit breakers/ non-automatic air circuit breakers up to 6300 A (AC), IEC /8 Introduction /9 3-pole, fixed-mounted versions /6 3-pole, withdrawable versions /23
More informationBARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing
BARON-MAX V Range Vertical Machining Centers Powerful Machines, Simple User Friendly Programming At a Very Affordable Pricing Cost Effective, High Performance Vertical Machining Centers BARON-MAX V Range
More informationObtaining a Converged Solution with Abaqus. Abaqus 2018
Obtaining a Converged Solution with Abaqus Abaqus 2018 About this Course Course objectives Upon completion of this course you will be able to: Understand how nonlinear problems are solved in Abaqus Develop
More informationThat s E[M]CONOMY: NEW. Not just training: Real action! CONCEPT TURN 260. CNC training with industrial performance
[ That s ] E[M]CONOMY: NEW Not just training: Real action! CONCEPT TURN 260 CNC training with industrial performance Concept TURN 260 As a systematic advancement of the CT250, the CT260 convinces by its
More informationKCTCS AAS IN ENGINEERING AND ELECTRONICS TECHNOLOGY ROBOTICS AND AUTOMATION TRACK TO NKU BS IN MECHATRONICS ENGINEERING TECHNOLOGY CHECKLIST
Associate of Applied Science in Engineering and Electronics Technology Robotics and Automation Track To Bachelor of Science in Mechatronics Engineering Technology Completion of the following curriculum
More informationMechanical Presses Hydraulic Presses Blanking Lines Pick & Place Units Transfer Systems Coil Lines
Mechanical Presses Hydraulic Presses Blanking Lines Pick & Place Units Transfer Systems Coil Lines About us The 64 years of history and know-how have turned us on an recognized presses manufacturer supported
More informationITR. INDUSTRIAL SOLUTIONS From World to Your Workplace ITR AUTOMATION GROUP
ITR INDUSTRIAL SOLUTIONS From World to Your Workplace ITR AUTOMATION GROUP ITR AUTOMATION GROUP We Bring Your Imaginations to Reality About us An energetic team of professionals established ITR AUTOMATION
More informationElectrical Systems and Fault Finding
Unit 31: Unit code Electrical Systems and Fault Finding A/615/1500 Unit level 4 Credit value 15 Introduction Electrical systems can be found in a very wide range of locations such as in manufacturing facilities,
More informationYour profit UMILL 1500 / Gantry-type milling machines for 5-axis machining MILLING EMCO-WORLD.COM
Your profit UMILL 1500 / 1800 Gantry-type milling machines for 5-axis machining MILLING EMCO-WORLD.COM Umill for 5-Ax 1 COMPACT DESIGN Maximum precision with top dynamics thanks to extraordinarily stable
More informationContinental Engineering Services
Automotive and transportation Services Product Simcenter Engineering firm uses Simcenter Amesim to optimize driving range of electric vehicles Business challenges Be recognized as an expert in electric
More informationSP / LP SERIES. Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. ISO 9001 ISO 14001
SP / LP SERIES Ultra Performance Bridge Type Vertical Machining Center AWEA MECHANTRONIC CO., LTD. HEADQUARTERS 629, Suezhetou Section, Kwanpu Rd., Wenshan Li, Hsinpu, Hsinchu 5, Taiwan TEL : +886-3-588-5191
More informationNetLogo and Multi-Agent Simulation (in Introductory Computer Science)
NetLogo and Multi-Agent Simulation (in Introductory Computer Science) Matthew Dickerson Middlebury College, Vermont dickerso@middlebury.edu Supported by the National Science Foundation DUE-1044806 http://ccl.northwestern.edu/netlogo/
More informationSINAMICS GM150 IGCT version
/2 Overview /2 Benefits /2 Design /6 Function /8 Selection and ordering data /8 Options Technical data /14 General technical data /15 Control properties /15 Ambient conditions /16 Installation conditions
More informationw w w. j y o t i. c o. i n Performance Series Vertical Machining Center
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds
More informationDEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM. B. Tech. AUTOMOBILE ENGINEERING. In Specialization with MOTORSPORT ENGINEERING
DEPARTMENT OF AUTOMOBILE ENGINEERING CURRICULUM (Applicable for Students admitted from Academic Year 2015-16) B. Tech. AUTOMOBILE ENGINEERING In Specialization with MOTORSPORT ENGINEERING SCHOOL OF MECHANICAL
More informationPlasma-Jet DSL Compact
Plasma Cutting Systems Small foot-print Plasma Cutting Systems for highest quality demands Hypertherm CNC Sensor for automatic torch height control (THC) Electro-pneumatically controlled vacuum table MTC
More informationIAE-101: Electrical Fundamentals for Non-Electrical Personnel
IAE-101: Electrical Fundamentals for Non-Electrical Personnel Abstract Today s world of rapidly evolving technology poses a wealth of challenges just to remain competitive in the marketplace. Everyone
More informationControl Design. The Future Is Forged at IMTS Submit Query
Page 1 of 5 Control Design Contact Us Login Register All articles White Papers Products News Submit Query Home» Industry News» 2014» The Future Is Forged at IMTS 2014 The Future Is Forged at IMTS 2014
More informationAlternative Intelligent Adaptable
Superior Clamping and Gripping Alternative Intelligent Adaptable Henrik A. Schunk, Kristina I. Schunk und Heinz-Dieter Schunk Top Performance in the Team SCHUNK is the world s No. 1 for clamping technology
More informationCNC MACHINES FOR NESTING, FURNITURE AND JOINERY PRODUCTION
AES Group redefines the standards with its production of CNC machines for wood, marble, plastic and aluminium processing. AES are a Global Company that submits the best service to its customers all around
More informationManufacturing Process I 10ME35 (Fundamentals of Foundry and Mechanical Computer Aided Machine 10ME36A/
III SEMESTER Teaching /week Sub-Code Title Dept. Pract. Duration I.A. / Total /Drg. 1 10MAT31 Engineering Mathematics - III Mathematics 04-03 25 100 125 2 Material Sc. & Metallurgy / 10ME32A/ Mechanical
More informationDYNA4 Open Simulation Framework with Flexible Support for Your Work Processes and Modular Simulation Model Library
Open Simulation Framework with Flexible Support for Your Work Processes and Modular Simulation Model Library DYNA4 Concept DYNA4 is an open and modular simulation framework for efficient working with simulation
More informationLMS Imagine.Lab AMESim Ground Loads and Flight Controls
LMS Imagine.Lab AMESim Ground Loads and Flight Controls LMS Imagine.Lab Ground Loads and Flight Controls LMS Imagine.Lab Ground Loads and Flight Controls helps designers from the aerospace industry to
More informationTable of Contents. 95 IMS 25 flexible manufacturing line with 5 stations. 104 IMS 26 flexible manufacturing line with 6 stations
Table of Contents Table of Contents Automation Technology IMS Industrial mechatronics system Mechatronics Sub-Systems with UniTrain-I IMS 1.2: DC transport system IMS 1.3: AC transport system IMS 3 Sorting
More informationThe linear motor technology for industrial applications
Industrial Linear Motors Purely electrical drive system Freely positionable along the entire stroke For precise and dynamic positioning tasks Direct drive technology provides longer life Clean room certification
More informationOrder Code CNC Trainer A - CNC Lathe Trainer
29901A - CNC Lathe Trainer Type of Control System : PLC based System Main Spindle Drive : AC Motor with VFD Z and X Drives : Steppe, Drive with Ramp function Input to Stopper : Optically Isolated Run Speed
More informationDUGARD. DUGARD Machine. Dugard V20/5-5 Axis, 5 Face High Speed Vertical Machining Centre. Machine Tools That Create Solutions Since 1939.
DUGARD Machine Tools That Create Solutions Since 1939 Dugard V20/5-5 Axis, 5 Face High Speed Vertical Machining Centre DUGARD Machine Tools www.dugard.com sales@dugard.com 01273 732286 Model V20/5 is a
More informationCNC Tool Room Milling Center MODEL: VM-760
CNC Tool Room Milling Center MODEL: VM-760 MACHINE FEATURES 7.5HP high torque spindle motor, low noise and vibration BT40/CAT40/DIN40 6000 rpm spindle speed, ( Optional 8,000, 10,00, 12,000 or 15,000rpm
More informationEE042: Practical Power System Protection for Engineers & Technicians
EE042: Practical Power System Protection for Engineers & Technicians EE042 Rev.001 CMCT COURSE OUTLINE Page 1 of 5 Training Description: This intensive course has been designed to give plant operators,
More informationBARON-MAX VB Series Vertical Machining Centers
BARON-MAX VB Series Vertical Machining Centers Heavy Duty Performance The Baron Max VB series offers versatility and value. Ideal for production and job shop applications, the rugged construction allow
More informationFaculty of Mechanical Engineering B.E. Mechanical Engineering (Sandwich) (R 2013) Semester III. Requirements for a batch of 30 students
Sl. No. Faculty of Mechanical Engineering (R 203) Semester III CE635 STRENGTH OF MATERIALS LABORATORY (R) (A) Deficiency (R - A). Universal Tensile Testing machine with double shear attachment 40 Ton Capacity
More informationPlasma-Jet DSL. Plasma Cutting Systems. Allowing maximum utilization of all possibilities offered by plasma technology.
Plasma Cutting Systems Allowing maximum utilization of all possibilities offered by plasma technology Selection of the ideal Hypertherm plasma source Hypertherm CNC & Software package Sensor for automatic
More informationComprehensive solution with SIHARBOR
Comprehensive solution with SIHARBOR Quick and easy connection to the ship via the cable management system Power supply from the public grid Reliable and clean SIHARBOR enables the ships to get power from
More informationActivity of YASKAWA for Industrie 4.0 -Focus on Robotics-
Activity of YASKAWA for Industrie 4.0 -Focus on Robotics- 1.Introduction of our company and products. 2.Concept for Our Industrie 4.0. 3.YASKAWA s Industrie 4.0 for Robotics. 4.Expectation for Industry
More informationCTX production turning machines
www.dmgmori.com CTX beta 800 4A CTX beta 1250 4A CTX production turning machines Machine and technology Applications and parts Control technology Energy efficiency Technical data CTX beta 4A with the highest
More informationThree-dimensional gantries
Key features At a glance A three-dimensional gantry (YXCR) is an assembly of several axis modules (EHM /DHMZ) to produce a movement in 3D space. Can be used universally for handling light to very heavy
More informationSpectrum PowerCC DM Distribution Management The control system for distribution network operators
Spectrum PowerCC DM Distribution Management The control system for distribution network operators Power Transmission and Distribution A glance at today s IT world shows that systems are becoming ever more
More informationUse of Simpack at the DaimlerChrysler Commercial Vehicles Division
Use of Simpack at the DaimlerChrysler Commercial Vehicles Division Dr. Darko Meljnikov 22.03.2006 Truck Product Creation (4P) Content Introduction Driving dynamics and handling Braking systems Vehicle
More informationHANDS-ON INDUSTRIAL TRAINING FLUID SENSORS SIMULATION SOFTWARE E-LEARNING CERTIFICATION PREPARATION
HANDS-ON INDUSTRIAL TRAINING FLUID SENSORS SIMULATION SOFTWARE E-LEARNING CERTIFICATION PREPARATION Innovative Design Offers Exceptional Options Lab-Volt offers the most comprehensive and flexible course
More informationSystems. Dynamic Test. Electrodynamic Vibration Test Systems
Systems 100 - water 120 kn cooled Electrodynamic Vibration Test Systems SW3-10480APP (100KN) SW3-10LS3-550APP (100KN) SW3-10650APP (100KN) SW3-12480APP (120KN) SW3-12LS3-550APP (120KN) Dynamic Test Technical
More informationHydraulic Drive Technology for Woodworking Machinery
Hydraulic Drive Technology for Woodworking Machinery 1 Drive & Control everything for keeping things moving. Whether your drive and control solutions are hydraulic, pneumatic, electric or mechanical being
More informationCNC Vertical Machining Centers
CNC Vertical Machining Centers The Best Valued VMC in the Market Today... Take a Minute and Compare Whatever the requirement there is a Storm VMC for Every Application Storm CNC Vertical Machining Centers
More informationATLAS Profiling System
Profiling System Profiling System for H-Beam Drilling and Cutting Profiling System With the Profiling System (APS), EPCA Germany provides integrated cells and full processing lines for (a). H-Beam (b).
More informationSitras SCS, -RCI, -FFP, -TTU
Sitras SCS, -RCI, -FFP, -TTU control system for traction power supply Remote control interface Frame fault protection Transfer trip unit siemens.com/rail-electrification The Sitras SCS station control
More informationThe easy, high-performance and safe servo drive system usa.siemens.com/sinamics-s210
SINAMICS S210 The easy, high-performance and safe servo drive system usa.siemens.com/sinamics-s210 Off to a fast start. Precise and reliable in operation Today, machine builders are facing special challenges
More informationMP-100-APS. Flame Spray Technologies SprayTech. Multi-Process Thermal Spray Centre
bv Impact 4, 6921 RZ Duiven P.O. Box 1027, 6920 BA Duiven The Netherlands Tel: +31 263190140 Fax: +31 263190141 E-mail: info@fst.nl Homepage: www.fst.nl Inc. 3040 Charlevoix Dr. SE Suite 203 I Grand Rapids,
More informationHDT ENGINEERING SERVICES AN OBJECTIVE APPROACH FROM PROOF-OF-CONCEPT TO FINAL ASSEMBLY AND TEST. The prevailing force in the field.
HDT ENGINEERING SERVICES AN OBJECTIVE APPROACH FROM PROOF-OF-CONCEPT TO FINAL ASSEMBLY AND TEST The prevailing force in the field. About HDT HDT designs, specifies and manufactures integrated solutions
More informationVarious duties efficiently solved EMCOMAT E-300 E-360 E-400. [ means:
[ E[M]CONOMY] means: Various duties efficiently solved EMCOMAT E-300 E-360 E-400 Cycle-controlled lathes with high-powered cutting performance and maximum precision EMCOMAT E-300 [Headstock] - Siemens
More informationPower Electronics and Drives (PED)
Power Electronics and Drives (PED) Introduction Spurred on by technological progress and a steadily increasing concern about the efficient use of depleting energy resources, static power electronic converters
More information