Parts Book. TA40 (OCDB) Articulated Truck (Detroit Diesel Series 60 Engine, ZF 6WG-310 Trans and ZF AP-17 Axles) Part Number

Transcription

1 CLICK HERE FOR TRACTOR TABLE OF CONTENTS CLICK HERE FOR TRACTOR OPTIONAL TABLE OF CONTENTS CLICK HERE FOR TRAILER TABLE OF CONTENTS CLICK HERE FOR TRAILER OPTIONAL TABLE OF CONTENTS P10894 Parts Book CLICK HERE TO RETURN TO CLICK MAIN HERE LIBRARY TO RETURN INDEX TO MAIN LIBRARY INDEX Part Number TA40 (OCDB) Articulated Truck (Detroit Diesel Series 60 Engine, ZF 6WG-310 Trans and ZF AP-17 Axles) Serial No. A through A November 2003 Revised: August 2008 PUBLISHED BY: CUSTOMER SUPPORT DEPARTMENT TEREX EQUIPMENT LIMITED MOTHERWELL, SCOTLAND

2 THIS PAGE IS INTENTIONALLY LEFT BLANK

3 WARRANTY ON PARTS AND ATTACHMENTS Terex Equipment Limited warrants that for a period of six months or 1000 hours, whichever comes first, after the sale of new Terex replacement parts or attachments by an authorised Terex dealer it will repair, or at its option, replace any defective or malfunctioning part or attachment. This warranty covers only malfunctions resulting from defects in material or workmanship. This warranty does not cover malfunctions resulting from negligence, alteration, accident or overloading; use for a purpose for which the part or attachment is not designed or approved by Terex; loss of time, inconvenience, loss of use of the vehicle or other consequential damages; or labour for removal or reinstallation of defective or malfunctioning parts or attachments. Repairs or replacements qualifying under this warranty will be performed by any authorised Terex dealer within a reasonable time following delivery of the malfunctioning part or attachment to the dealer's place of business. Defective or malfunctioning parts or attachments must be delivered to an authorised Terex dealer's place of business during regular business hours for warranty repairs or replacements. The dealer must be furnished with the purchaser's copy of the sales slip or repair order to validate date of purchase. * * * * * SOLE WARRANTY This is the only express warranty applicable to new Terex parts and attachments sold by Terex dealers and Terex neither assumes nor authorises anyone to assume for it any other obligation or liability in connection with such parts or attachments.

4 THIS PAGE IS INTENTIONALLY LEFT BLANK

5 INSTRUCTIONS FOR USE OF TEREX PARTS BOOK This Parts Book is divided into Major Sections which cover components corresponding to specific areas of the machine. Printed at the top left hand corner of each Parts Page is an Index Code which includes three numbers - the first of these relates to a Major Section, the second indicates a Sub-section within a Major Section and the last the model PLI number. Certain Major Sections may not apply to the particular model covered in this Parts Book and, consequently, will be omitted. An illustrated Index page shows all the Major Component Section numbers included in the book. For example - SECTION CHASSIS SECTION FRONT AXLE GROUP SECTION BODY HOIST SYSTEM etc. Major Component Sections are listed in the 'Table Of Contents' pages together with Sub-section headings. For example to locate the serviceable items of a Steering Cylinder - 1. The Table of Contents shows the steering components to be in Major Section The steering cylinder is listed in Major Section 220, Sub-section Select the Parts Page Code that applies to the unit Serial number for which parts are needed and locate the Page with reference number. EXAMPLE SERIAL NUMBERS - Each Parts Book covers a particular range of unit Serial Numbers. It is important that unit Serial Numbers are quoted on all orders for Parts. PARTS LISTS - Parts Forms usually consist of detailed parts information listed on one page together with a parts illustration on the opposite page. The parts list is printed in the order of the reference numbers shown on the parts illustration. The first column lists Note Letters; the second lists the reference numbers; the third shows quantity required and the fourth gives the parts descriptions. Parts which are part of an assembly have their descriptions indented beneath the assembly description. ILLUSTRATIONS - These show typical assemblies and individual piece parts.they are intended for general reference only and may not always show exact details of parts. Parts are identified on each illustration with an item number. Note the item number of the part required and locate it in the parts list. The part number opposite the item number is the part to order.

6 INDENTATIONS - Parts which are indented under another part are Sub-groups of a Major Assembly or Sub-assembly. Parts which are not indented are major assemblies or individual component parts which do not belong to a major assembly. EXAMPLE Pump Assy Shaft Ring Control Assy Spring Gasket - If you order Item 1, you will receive Items If you order Item 4, you will receive Items 4 and 5. - If you order Item 6, you will receive only Item 6. NOTES - Whenever there is an alphabetical symbol to the left of the item number, refer to the corresponding note at the bottom of the form for information regarding ordering or application of the particular part number(s) noted. ABBREVIATIONS - The abbreviations in this book have the following meanings - Amps... Amperes Hsg... Housing N.I... Not Illustrated As R... As Required I.D... Inside Diameter N.L.A... No Longer Available Assy... Assembly L.H... Left Hand N.S.S... Not Sold Separately Brkt... Bracket L.W... Lockwasher O.D... Outside Diameter Cad-Pltd... Cadium Plated Lg... Long Pr... Pair Comm... Commencement of production Lkg... Linkage P.T.O... Power-Take-Off E.S.N... Elastic Stop Nut Mtg... Mounting R.H... Right Hand Ftgs... Fittings N.C... Note Code Std... Standard

7 Articulated Truck CHASSIS 100 TRACTOR SECTIONS COOLING SYSTEM 210 ENGINE 110 STEERING SYSTEM 220 TRANSMISSION 120 BODY SYSTEM 230 DRIVELINE 130 BRAKING SYSTEM 250 FRONT AXLE 140 CAB 260 BRAKE PARTS 165 DECALS 290 SUSPENSION SYSTEM 180 ELECTRICAL SYSTEM 190 FUEL SYSTEM 200

8 NOTE: -SECTIONS SHOWN IN BOLD ITALIC ARE ADDITIONS AND/OR REVISIONS SINCE LAST UPDATE TABLE OF CONTENTS FOR MODEL TA40 TRACTOR FROM SERIAL NO. A Revised: 08/08 SECT-PAGE-PLI DESCRIPTION SERIAL NO. EFFECTIVITY REVISION AND DATE SECTION 100 CHASSIS CHASSIS HOOD AND MOUNTING FENDERS AND MOUNTING R1 04/05 SECTION 110 ENGINE ENGINE ORDERING INSTRUCTIONS ENGINE AND MOUNTING R3 04/ AIR CLEANER AIR CLEANER PIPES AND HOSES EXHAUST AND MOUNTING R1 10/04 SECTION 120 TRANSMISSION TRANSMISSION MOUNTING TRANSMISSION BREAKDOWN CONTROL VALVE SHIFT CONTROL A TO A SHIFT CONTROL A TO A SHIFT CONTROL A / FILTER OIL LINES-TRANSMISSION R1 07/ OIL PUMP TORQUE CONVERTER LUBRICATION PIPES INDUCTIVE TRANSMITTER ELECTRIC SHIFT CONTROL VALVE GEARSHIFT GEARBOX HOUSING CLUTCH ASSEMBLY KV+K CLUTCH ASSEMBLY KR+K CLUTCH ASSEMBLY K3+K RETARDER RETARDER OIL PIPES PTO MAIN HYDRAULIC PUMP POWER TAKE-OFF EMERGENCY STEERING PUMP R1 10/ INPUT-DRIVE ASSEMBLY LAYSHAFT GEARING DIFFERENTIAL AXLE DISCONNECT TEMERATURE SENSOR LOOSE PARTS-TRANSMISSION

9 TABLE OF CONTENTS FOR MODEL TA40 TRACTOR FROM SERIAL NO. A Revised: 08/08 SECT-PAGE-PLI DESCRIPTION SECTION 130 DRIVELINE FRONT DRIVELINE SERIAL NO. EFFECTIVITY REVISION AND DATE SECTION 140 FRONT AXLE AXLE COMPLETE-FRONT A TO A AXLE COMPLETE-FRONT A (ALSO S/NO A ) 08/ AXLE GROUP-FRONT A TO A AXLE GROUP-FRONT A (ALSO S/NO A ) 08/ PLANETARY GEARING-FRONT A TO A PLANETARY GEARING-FRONT A (ALSO S/NO A ) 08/ WHEEL, RIM AND TYRE-FRONT DIFFERENTIAL-FRONT A TO A DIFFERENTIAL-FRONT A (ALSO S/NO A ) 08/08 SECTION 165 BRAKE PARTS BRAKE ASSY-OCDB(ARTICS) A TO A BRAKE ASSY-OCDB(ARTICS) A (ALSO S/NO A ) 08/08 SECTION 180 SUSPENSION SYSTEM FRONT SUSPENSION R2 04/05 SECTION 190 ELECTRICAL SYSTEM TERMINALS CONNECTORS CABLES/HARNESSES-CAB A TO A R2 04/ CABLES/HARNESSES-CAB A / CABLES/HARNESSES-CHASS/ENG BATTERY AND CABLES BATTERY MOUNTING R1 01/ ELECTRICAL LIGHTING SYSTEM ALTERNATOR STARTER MOTOR FLOODLAMP/SPOTLIGHT/WORK LIGHT SWITCHES AND SENSORS RADIO CASSETTE AND SPEAKERS ELECTRICAL HORN SECTION 200 FUEL SYSTEM FUEL TANK AND MOUNTING R4 04/ FUEL LINES ACCELERATOR LINKAGE NOTE: -SECTIONS SHOWN IN BOLD ITALIC ARE ADDITIONS AND/OR REVISIONS SINCE LAST UPDATE

10 NOTE: -SECTIONS SHOWN IN BOLD ITALIC ARE ADDITIONS AND/OR REVISIONS SINCE LAST UPDATE TABLE OF CONTENTS FOR MODEL TA40 TRACTOR FROM SERIAL NO. A Revised: 08/08 SECT-PAGE-PLI DESCRIPTION SERIAL NO. EFFECTIVITY REVISION AND DATE SECTION 210 COOLING SYSTEM RADIATOR ASSEMBLY R3 10/ RADIATOR MOUNTING R1 10/ RADIATOR FAN MOTOR-HYD LINES R5 10/ RADIATOR PIPING R1 10/ RADIATOR HEADER TANK AND HOSES LOW TEMPERATURE UNLOADER VALVE OIL COOLER-DISC BRAKES A TO A OIL COOLER-DISC BRAKES A / OIL COOLING LINES-DISC BRAKES A TO A OIL COOLING LINES-DISC BRAKES A R1 07/ OIL COOLER AND PIPING TRANS A TO A R2 02/ OIL COOLER AND PIPING TRANS A R3 02/ OIL COOLER OIL COOLER AND LINES-HYDRAULIC SECTION 220 STEERING SYSTEM STEERING LINES R3 04/ PUMP-STEERING R1 10/ STEERING VALVE FLOW AMPLIFIER VALVE STEERING CYLINDER EMERGENCY STEERING VALVE STEERING COLUMN MOUNTING SECTION 230 BODY SYSTEM LINES AND FITTINGS-BODY HOIST R2 09/ SERVO CONTROL LINES-BODY TANK AND MOUNTING-BODY HOIST CONTROL VALVE-BODY HOIST R2 04/ JOYSTICK-BODY CONTROL PILOT SUPPLY VALVE SECTION 250 BRAKING SYSTEM BRAKE LINES-HYDRAULIC BRAKE COOLANT TANK ASSEMBLY A TO A R1 04/ BRAKE COOLANT TANK ASSEMBLY A TO A / BRAKE COOLANT TANK ASSEMBLY A / BRAKE PUMP MOTOR/TRIPLE PUMP ASSY R1 04/ BRAKE MANIFOLD/PAS VALVE

11 TABLE OF CONTENTS FOR MODEL TA40 TRACTOR FROM SERIAL NO. A Revised: 08/08 SECT-PAGE-PLI DESCRIPTION SERIAL NO. EFFECTIVITY REVISION AND DATE SECTION 250 BRAKING SYSTEM-CONTINUED BRAKE ACCUMULATOR TWO SPEED CONTROL VALVE TREADLE VALVE PRIORITY UNLOADER VALVE DIRECTIONAL CONTROL VALVE RELIEF VALVE-BRAKES FILTER ASSY-O.C.D.BRAKES SECTION 260 CAB CAB ASSEMBLY R4 02/ CAB MOUNTING R3 04/ CAB DOOR-LEFT HAND R1 02/ SWITCHES AND INSTRUMENTS R1 09/ SEAT-DRIVER A TO A SEAT-DRIVER A / SEAT-PASSENGER AIR CONDITIONER/HEATER A TO A R1 04/ AIR CONDITIONER/HEATER A / HEATER LINES AND WIRING AIR CONDITIONER LINES A TO A R1 07/ AIR CONDITIONER LINES A / WINDSCREEN WASHER SECTION 290 DECALS DECALS-ENGLISH R5 10/04 NOTE: -SECTIONS SHOWN IN BOLD ITALIC ARE ADDITIONS AND/OR REVISIONS SINCE LAST UPDATE

12 CHASSIS FROM SERIAL NO. A DRAWING NO. P10839 P

13 CHASSIS FROM SERIAL NO. A FRAME ASSY-COMPLETE

14 R2 07/03 (ECN104450,104701,104835, ECN ) HOOD AND MOUNTING FROM SERIAL NO. A DRAWING NO. P P HOOD FRAME

15 HOOD AND MOUNTING FROM SERIAL NO. A HOOD AND MOUNTING FROM SERIAL NO. A B A A A HOOD ASSY-TA HANDLE (LHS) BOLT WASHER BOLT WASHER NSS.SUBFRAME/HINGE ASSY HINGE ASSY PLATE BOLT LOCKWASHER BALLJOINT BUSH KIT-HOODCATCH BOLT LOCKNUT BOLT WASHER WASHER-HARDENED STOP-HOOD SPRING CABLE ASSY-HOOD CATCH PLATE-HOOD CABLE ANCHO GOALPOST WELDMENT BOLT BOLT WASHER LOCKNUT GRILLE-HOOD ASSY BOLT LOCKWASHER GAS STRUT STRAP-HOOD RETAINING BOLT WASHER-HARDENED TUBE TUBE WASHER LOCKWASHER LOCKNUT HOOD BLANKING PIECE BOLT WASHER WASHER-HARDENED LOCKNUT BAR-HOOD SAFETY BOLT LOCKNUT WASHER WASHER D SHAPE LOCKNUT PLATE BULKHEAD BOLT WASHER LOCKWASHER NOTES: A PARTS IN HOOD HANDLE KIT B FOR OPTIONAL SOUND INSULATED HOOD ASSEMBLY (REF EC DIRECTIVE 2000/14/EC) USE HOOD ASSY R2 07/03 (ECN104450,104701,104835, ECN )

16 R1 04/05 (ECN , ECN ) FENDERS AND MOUNTING FROM SERIAL NO. A DRAWING NO. P10886A P ,18,48 44,18, A A A REF. SEC ,18, A A

17 FENDERS AND MOUNTING FROM SERIAL NO. A DRAWING NO. P10886B R1 04/05 (ECN , ECN )

18 R1 04/05 (ECN , ECN ) FENDERS AND MOUNTING FROM SERIAL NO. A FENDER ASSY-LHS TREAD PLATE SCREW-C/SUNK M8X FENDER ASSY-RHS TREAD PLATE SCREW-C/SUNK M8X BRACKET-LH FENDER PAD PAD-LH FENDER STEP-RH A A EXTENSION-FENDER MUDGUARD-LH MUDGUARD-RH MUDFLAP PANEL PLATE ASSY-RH FENDER STEP-LH A A BOLT WASHER-HARDENED ANGLE-CAB FLOOR STEP WIRE WASHER-HARDENED BOLT BOLT WASHER WASHER LOCKNUT BOLT BOLT WASHER BOLT NUT LOCKWASHER BOLT LOCKNUT BOLT HANDRAIL ASSY-LHS LOCKWASHER WASHER LOCKNUT FENDERS AND MOUNTING FROM SERIAL NO. A A A A B SCREW HANDRAIL ASSY-RH WASHER QUILT-FRONT WHEEL LH QUILT-FRONT WHEEL RH GUARD ASSY-SUMP PLATE WASHER QUILT-FRONT WHEEL LH FT QUILT INSULATION STEP-RHS A STEP-LHS A RUBBER SUPPORT A PLATE A SPACER A SCREW A WASHER A LOCKNUT A NOTES: A PARTS IN KIT-INSULATION QUILTS B OPTIONAL EQUIPMENT (REF EC DIRECTIVE 2000/14/EC)

19 THIS PAGE IS INTENTIONALLY LEFT BLANK

20 THIS PAGE IS INTENTIONALLY LEFT BLANK

21 ENGINE ORDERING INSTRUCTIONS FROM SERIAL NO. T DRAWING NO. P8544 P8544 DETROIT DIESEL ENGINE THIS UNIT IS EQUIPPED WITH A DETROIT DIESEL ENGINE. TEREX DOES NOT SELL ENGINES OR ENGINE PARTS. THESE SHOULD BE OBTAINED FROM THE NEAREST ENGINE MANUFACTURER'S SALES AND SERVICE OUTLET. ILLUSTRATIONS AND PART NUMBERS OF ENGINE PARTS ARE OMITTED FROM THIS TEREX PARTS BOOK. ANY QUESTIONS ON ENGINE PARTS AND WARRANTY SHOULD BE DIRECTED TO THE ENGINE MANUFACTURER'S SALES AND SERVICE OUTLET.

22 R3 04/05 (ECN , SER CORR, ECN , ECN ) ENGINE AND MOUNTING FROM SERIAL NO. A DRAWING NO. P11402 P , LH 38 RH ON ENGINE LHS 3 4

23 ENGINE AND MOUNTING FROM SERIAL NO. A ENGINE AND MOUNTING FROM SERIAL NO. A ENGINE ASSY-SER 60 T OIL FILTER FILTER-FUEL PRIMARY FILTER-FUEL SECONDARY A FILTER-WATER PRE-CHAR A A FILTER-WATER A BOLT WASHER-HARDENED BOLT WASHER-SNUBBING ISOLATION MOUNT WASHER NUT BOLT ENGINE COUPLING BOLT PLATE-ENGINE LIFTING A A PLATE-ENGINE LIFTING A SCREW BOLT WASHER-HARDENED LINK-ALTERNATOR SCREW ASSY-ALTERNATOR NUT PIN LINK BOLT WASHER LOCKNUT BOLT LOCKWASHER BOLT WASHER LOCKNUT V BELT A A BONDED DOUBLE V BELT A BUSHING CONNECTOR ENGINE MTG-REAR LH ENGINE MTG-REAR RH NOTE:A DCA FILTER-WATER PRE-CHARGED AT INITIAL FILL, AFTER DRAINING USE DCA FILTER-WATER FOR ALL OTHER CHANGE INTERVALS. R3 04/05 (ECN , SER CORR, ECN , ECN )

24 AIR CLEANER FROM SERIAL NO. A DRAWING NO. P10131 P

25 AIR CLEANER FROM SERIAL NO. A AIR CLEANER KIT AIR CLEANER ASSY ELEMENT-MAIN ELEMENT-SAFETY VALVE-VACUATOR BAND-MOUNTING CAP-RAIN CLAMP

26 AIR CLEANER PIPES AND HOSES FROM SERIAL NO. A DRAWING NO. P10797 P AIR CLEANER SEC TO TURBO

27 AIR CLEANER PIPES AND HOSES FROM SERIAL NO. A BRACKET-A/C MTG BOLT LOCKWASHER WASHER NUT TUBE ASSY-AIR INTAKE HOSE CLAMP ELBOW CLAMP INSERT CLAMP BRACKET-A/C MTG BRACKET-AIR INTAKE TUBE BOLT LOCKWASHER SCREW LOCKWASHER WASHER-HARDENED CLAMP PLATE BOLT NUT CLAMP

28 R1 10/04 (ECN , ECN ) EXHAUST AND MOUNTING FROM SERIAL NO. A DRAWING NO. P10796 P CLAMP SWE 25 6 COVER & MTG-HYDRAULIC VALVES ,

29 EXHAUST AND MOUNTING FROM SERIAL NO. A TUBE-TURBO OUTLET TUBE-EXHAUST TUBE-EXHAUST SLEEVE TUBE-EXHAUST A SILENCER BOLT NUT LOCKWASHER EXHAUST STACK A A EXHAUST STACK A CLAMP TUBE-EXHAUST HEAT SHIELD BOLT CLAMP CLAMP CRADLE ASSEMBLY BOLT LOCKNUT WASHER EXHAUST GUARD LOCKWASHER EXHAUST GUARD BOLT EXHAUST TUBE-FLEXIBLE WASHER PLATE-COVER BOLT WASHER PLATE-BENT BOLT LOCKWASHER WASHER-HARDENED NOTE:A FOR OPTIONAL CATALYTIC CONVERTOR USE R1 10/04 (ECN , ECN )

30 R1 01/03 (ECN , ECN ) TRANSMISSION MOUNTING FROM SERIAL NO. A DRAWING NO. P11082 P , ,

31 TRANSMISSION MOUNTING FROM SERIAL NO. A BRACKET ASSEMBLY BRACKET ASSEMBLY REAR ISOLATION MOUNT ISOLATION MOUNT BOLT BOLT NSS BOLT NUT-NYLON INSERT SPECIAL BOLT-METRIC WASHER WASHER-SNUBBING LOCKWASHER LOCKWASHER WASHER GASKET DIPSTICK DIPSTICK TUBE ASSY BOLT BRACKET CLIP BOLT LOCKWASHER SCREW NUT LATCH SECURITY CLAMP BOLT LOCKNUT LOCK KEY PLATE ASSY BOLT WASHER LOCKNUT R2 01/03 (ECN , ECN )

32 04/03 (ECN ) TRANSMISSION BREAKDOWN FROM SERIAL NO. A DRAWING NO.P11010 P

33 TRANSMISSION BREAKDOWN FROM SERIAL NO. A RPC TRANSMISSION-6WG310 NOTE:A SEAL/GASKET KIT FOR COMPLETE TRANS OVERHAUL 10/08 (ECN )

34 04/03 (ECN ) CONTROL VALVE FROM SERIAL NO. A DRAWING NO.P11101

35 CONTROL VALVE FROM SERIAL NO. A HOUSING-GEARSHIFT PISTON PISTON RING COVER GASKET SCREW SPRING COVER SENSOR-TEMPERATURE O RING GASKET GASKET SCREW CAPSCREW O RING TEMP SENSOR O RING PLUG PLUG INTERM PLATE 04/03 (ECN )

36 SHIFT CONTROL FROM SERIAL NO. A TO A DRAWING NO. P10651 P V N R 3 4

37 SHIFT CONTROL FROM SERIAL NO. A TO A AUTOMATIC KIT EST-37A SHIFT CONTROLLER VDU AND CABLE MODULE AUTOMATIC HARNESS FOOTSWITCH

38 09/05 (ECN ) SHIFT CONTROL FROM SERIAL NO. A TO A DRAWING NO. P10651 P V N R 3 4

39 SHIFT CONTROL FROM SERIAL NO. A TO A AUTOMATIC KIT EST-37A SHIFT CONTROLLER VDU AND CABLE MODULE AUTOMATIC HARNESS FOOTSWITCH 09/05 (ECN )

40 02/06 (ECN ) SHIFT CONTROL FROM SERIAL NO. A DRAWING NO. P10651 P V N R 3 4

41 SHIFT CONTROL FROM SERIAL NO. A AUTOMATIC KIT EST-37A SHIFT CONTROLLER VDU AND CABLE MODULE AUTOMATIC HARNESS FOOTSWITCH 02/06 (ECN )

42 04/03 (ECN ) FILTER FROM SERIAL NO. A DRAWING NO.P8072

43 FILTER FROM SERIAL NO. A SCREEN COVER O RING SCREW WASHER 04/03 (ECN )

44 R1 07/04 (ECN , ECN ) OIL LINES-TRANSMISSION FROM SERIAL NO. A DRAWING NO. P11264A P11264A PRESS SWT SEC B RETARDER VALVE A C SEE PAGE SEE PAGE 2 51,52

45 OIL LINES-TRANSMISSION FROM SERIAL NO. A DRAWING NO.P11264B P11264B TO CENTRE AXLE DIFF. LOCK T B A DIR. CONTROL VALVE , TEE AT TRANS CONT VALVE , A P T B SOLENOID VALVE (TRANS) TO TRANS SUMP SEE PAGE ,27, B P A A RETARDER VALVE C , PRESS. RED. VALVE T SOLENOID VALVE (ADJACENT TO RH STEER CYL) P A 44 FRONT DIFF. LOCK ,65, GASKET SEC R1 07/04 (ECN , ECN )

46 R1 07/04 (ECN , ECN ) OIL LINES-TRANSMISSION FROM SERIAL NO. A ELBOW HOSE ASSY HOSE ASSY ELBOW ELBOW ADAPTOR ADAPTOR ELBOW HOSE ASSY HOSE ASSY ADAPTOR-BULKHEAD PLUG-DUST ADAPTOR ELBOW TEE ADAPTOR HOSE ASSY HOSE ASSY ELBOW CONNECTOR PLATE ASSY UNION HOSE ASSY TEE REDUCER RETARDER VALVE CARTRIDGE STEM COIL SOLENOID VALVE KIT-STEM & COIL VALVE-PRESS REDUCER KIT-SEAL TEE PIPE ASSY ELBOW HOSE ASSY ELBOW-BULKHEAD HOSE ASSY BRANCH TEE HOSE ASSY OIL LINES-TRANSMISSION FROM SERIAL NO. A HOSE ASSY HOSE ASSY ADAPTOR ELBOW HOSE ASSY UNION PIPE ASSY PIPE ASSY PIPE ASSY HOSE ASSY FILTER (BLUE) HEAD-FILTER TEE ELBOW CONNECTOR ELBOW ADAPTOR HOSE ASSY HOSE ASSEMBLY TEE TEE PLUG PLATE-ADAPTOR BOLT LOCKWASHER WASHER

47 THIS PAGE IS INTENTIONALLY LEFT BLANK

48 04/03 (ECN ) OIL PUMP FROM SERIAL NO. A DRAWING NO.P11102

49 OIL PUMP FROM SERIAL NO. A GEAR PUMP KEY O RING 04/03 (ECN )

50 04/03 (ECN ) TORQUE CONVERTER FROM SERIAL NO. A DRAWING NO.P8057

51 TORQUE CONVERTER FROM SERIAL NO. A CONVERTER 04/03 (ECN )

52 04/03 (ECN ) LUBRICATION PIPES FROM SERIAL NO. A DRAWING NO. P11278A

53 04/03 (ECN ) LUBRICATION PIPES FROM SERIAL NO. A DRAWING NO. P11278B

54 04/03 (ECN ) LUBRICATION PIPES FROM SERIAL NO. A DRAWING NO. P11278C

55 LUBRICATION PIPES FROM SERIAL NO. A SCREW O RING CONNECTOR O RING SCREW-UNION O RING REDUCER SOCKET HOSE ASSY HOSE ASSY HOSE ASSY HOSE ASSY SEAL HOSE ASSY SCREW-UNION SLEEVE-SCREW-IN UNION O RING O RING O RING HOSE ASSY GASKET SLEEVE SCREW-IN PIPE ADAPTOR O RING FITTING-DOUBLE O RING HOUSING PIPE PLUG-SCREW O RING SPRING PISTON RING STOP STOP CONNECTOR O RING VALVE-SOLENOID LUBRICATION PIPES FROM SERIAL NO. A O RING O RING SCREW LOCKWASHER SCREW-NLA CAPSCREW WASHER COVER SETSCREW SCREW SOCKET ELBOW PIPE SLEEVE 04/03 (ECN )

56 04/03 (ECN, ) INDUCTIVE TRANSMITTER FROM SERIAL NO. A DRAWING NO.P11104

57 INDUCTIVE TRANSMITTER FROM SERIAL NO. A TRANSMITTER O RING TRANSMITTER-SPEED O RING SHEET CAPSCREW SHIM (2.00 MM) SHIM RING 04/03 (ECN )

58 04/03 (ECN ) ELECTRIC SHIFT CONTROL VALVE FROM SERIAL NO. A DRAWING NO.P11105

59 ELECTRIC SHIFT CONTROL VALVE FROM SERIAL NO. A GASKET DUCT PLATE GASKET SCREW CAPSCREW TORX SCREW PLUG O RING 04/03 (ECN )

60 04/03 (ECN ) GEARSHIFT FROM SERIAL NO. A DRAWING NO.P11106A

61 04/03 (ECN ) GEARSHIFT FROM SERIAL NO. A DRAWING NO.P11106B

62 GEARSHIFT FROM SERIAL NO. A VALVE BLOCK PLUG O RING ORIFICE PISTON SPRING PISTON SPRING PISTON COMPR. SPRING PISTON-CONTROL SPRING GASKET HOUSING CAPSCREW REGULATOR-PRESSURE O RING PLATE CAPSCREW GASKET HOUSING CAPSCREW REGULATOR-PRESSURE O RING PLATE CAPSCREW HARNESS GASKET COVER CAPSCREW GASKET COVER CLAMP CAPSCREW INTERM SHEET SCREEN DUCT PLATE SCREW 04/03 (ECN )

63 THIS PAGE IS INTENTIONALLY LEFT BLANK

64 04/03 (ECN ) GEARBOX HOUSING FROM SERIAL NO. A DRAWING NO. P11273

65 GEARBOX HOUSING FROM SERIAL NO. A HOUSING COVER CAPSCREW CAPSCREW PIN COVER COVER SHEET SEALING CAP CAPSCREW WASHER NUT PLATE PIN-GROOVED CAPSCREW SCREW SCREW NUT PLUG O RING PLATE SCREW BREATHER-HOSE POT SCREW PLUG O RING PLUG O RING O RING PLUG CAP PIN GASKET COVER PLATE SCREW 04/03 (ECN )

66 04/03 (ECN ) CLUTCH ASSEMBLY KV+K1 FROM SERIAL NO. A DRAWING NO.P11198

67 CLUTCH ASSEMBLY KV+K1 FROM SERIAL NO. A WASHER RING RING-SNAP DISC CARRIER WASHER RING SCREW PISTON O RING O RING DISC DISC SHIM B= SHIM B= DISC= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= END SHIM SHIM-END COVER-BEARING CUP SPRING CLUTCH ASSEMBLY KV+K1 FROM SERIAL NO. A OIL DAM PLUG O-RING DISC RING-SNAP SHIM B= DISC SHIM B= SHIM B= SHIM B= SHIM B= DISC SHIM B= WASHER SHIM B= SLOTTED NUT SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= /03 (ECN )

68 CLUTCH ASSEMBLY KV+K1 FROM SERIAL NO. A SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SHIM S= SPUR GEAR BEARING RING BEARING PLUG SLOTTED NUT COVER O RING SCREW GEAR BEARING-BALL BEARING-ROLLER 04/03(ECN )

69 THIS PAGE IS INTENTIONALLY LEFT BLANK

70 04/03 (ECN ) CLUTCH ASSEMBLY KR+K2 FROM SERIAL NO. A DRAWING NO.P11199

71 CLUTCH ASSEMBLY KR+K2 FROM SERIAL NO. A PLUG SHIM B= DISC RING DISC CARRIER PLUG OIL DAM PISTON O RING END SHIM O RING RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= SHIM-END CUP SPRING RING O-RING RING-SNAP DISC-CLUTCH-OUTER DISC-CLUTCH-OUTER DISC CLUTCH ASSEMBLY KR+K2 FROM SERIAL NO. A DISC DISC-CLUTCH-INNER DISC DISC DISC-CLUTCH-INNER WASHER DISC SHIM B= SHIM B= SHIM B= SHIM B= SHIM B= WASHER SPUR GEAR BEARING-ROLLER SHIM A= SHIM A= SHIM A= SHIM A= SHIM A= SHIM A= SHIM A= SHIM A= SHIM A= SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM BEARING BEARING SLOTTED NUT 04/03 (ECN )

72 CLUTCH ASSEMBLY KR+K2 FROM SERIAL NO. A BEARING SCREW COVER GEAR GEAR SNAP RING BEARING STUD NUT BEARING-ROLLER SLOTTED NUT O RING COVER DISC 04/03 (ECN )

73 THIS PAGE IS INTENTIONALLY LEFT BLANK

74 04/03 (ECN ) CLUTCH ASSEMBLY K3+K4 FROM SERIAL NO. A DRAWING NO.P11200

75 CLUTCH ASSEMBLY K3+K4 FROM SERIAL NO. A PLUG SCREW RING RING DISC CARRIER SHIM B= DISC DISC PISTON O RING O RING RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= RING A= END SHIM CUP SPRING OIL DAM O-RING RING-SNAP SHIM B= SHIM B= SHIM B= SHIM B= SHIM B= DISC DISC SHIM B= CLUTCH ASSEMBLY K3+K4 FROM SERIAL NO. A SHIM B= SHIM B= SHIM B= SHIM B= SHIM B= WASHER GEAR BEARING WASHER WASHER WASHER WASHER (0.50 MM) WASHER (0.10 MM) WASHER (0.20 MM) WASHER WASHER WASHER WASHER BEARING-ROLLER COVER SLOTTED NUT COVER BEARING-ROLLER O RING SPUR GEAR BEARING-ROLLER BEARING-ROLLER PLUG 04/03 (ECN )

76 04/03 (ECN ) RETARDER FROM SERIAL NO. A DRAWING NO.P11111

77 RETARDER FROM SERIAL NO. A STATOR PLUG O RING STATOR RING RING SCREW ROTOR RING-PISTON RING COVER RING SCREW O RING CAPSCREW WASHER ABSORBER SPRING DISC-HOUSING CAGE-ROLLER WASHER-AXIAL GUIDE-SPRING RING-INTERM O RING SCREW FLANGE-SHAFT SCREW BEARING SHIM SHIM SHIM SHIM SHIM SHIM SHIM WASHER WASHER SHIM 1.50MM SHIM (0.50 MM) SHIM (0.30 MM) SHIM (0.20 MM) RETARDER FROM SERIAL NO. A SHIM 2.00MM WASHER WASHER SEAL DISC SCREW WASHER-TAB SCREW 04/03 (ECN )

78 04/03 (ECN ) RETARDER OIL PIPES FROM SERIAL NO. A DRAWING NO.P11196

79 RETARDER OIL PIPES FROM SERIAL NO. A PIPE ELBOW PIPE PIPE SLEEVE SLEEVE PLUG TEE SLEEVE 04/03(ECN )

80 04/03 (ECN ) PTO MAIN HYDRAULIC PUMP FROM SERIAL NO. A DRAWING NO. P11277

81 PTO MAIN HYDRAULIC PUMP FROM SERIAL NO. A SHAFT RING-PISTON BEARING WASHER DRIVER V-RING PLATE CAPSCREW O RING FLANGE-PUMP SCREW SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM PTO MAIN HYDRAULIC PUMP FROM SERIAL NO. A SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM O RING COVER PLATE SCREW GEAR RING-SNAP ROLLER BEARING 04/03(ECN )

82 04/03 (ECN ) POWER TAKE-OFF FROM SERIAL NO. A DRAWING NO. P11276

83 POWER TAKE-OFF FROM SERIAL NO. A SHAFT GEAR BEARING-ROLLER ORIFICE ROLLER BEARING SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM SHIM POWER TAKE-OFF FROM SERIAL NO. A SHIM SHIM SHIM SHIM SHIM SHIM SHIM CIRCLIP FLANGE-PUMP O RING SCREW SCREW O RING COVER PLATE 04/03 (ECN )

84 R1 10/04 (ECN , SER CORR) EMERGENCY STEERING PUMP FROM SERIAL NO. A DRAWING NO.P10380

85 EMERGENCY STEERING PUMP FROM SERIAL NO. A A PUMP O RING SCREW GEAR RING-RETAINING SNAP RING BEARING-BALL NOTE: A SEAL KIT R1 10/04 (ECN , SER CORR)

86 04/03 (ECN ) INPUT-DRIVE ASSEMBLY FROM SERIAL NO. A DRAWING NO.P11197

87 INPUT-DRIVE ASSEMBLY FROM SERIAL NO. A SHAFT-INPUT GUARD FLANGE 8.5C RING-PISTON GEAR-HELICAL BEARING GASKET CONVERTER BELL PLUG SLOT PIN FLANGE-OIL FEED O RING COVER SLEEVE-NEEDLE SCREW SCREW SCREW SCREW SCREW SCREW SCREW RING PISTON SPRING PIN O RING PLUG O RING VALVE PLUG O RING PLUG O RING 04/03(ECN )

88 04/03 (ECN ) LAYSHAFT GEARING FROM SERIAL NO. A DRAWING NO.P10372

89 LAYSHAFT GEARING FROM SERIAL NO. A GEAR BEARING-ROLLER BUSH SCREW AXLE COVER 04/03(ECN )

90 04/03 (ECN ) DIFFERENTIAL FROM SERIAL NO. A DRAWING NO. P11275A

91 04/03(ECN ) DIFFERENTIAL FROM SERIAL NO. A DRAWING NO. P11275B

92 DIFFERENTIAL FROM SERIAL NO. A PLANET CARRIER SUN GEAR PLANET-GEAR ROLLER SET WASHER WASHER-THRUST SHAFT-PLANET SLOT PIN SLOT PIN SHAFT-OUTPUT RING-SNAP RING-RETAINER SHAFT-OUTPUT RING-SNAP SLEEVE-NEEDLE SNAP RING RING RING GEAR CARRIER-RING GEAR RING-SNAP BEARING-ROLLER BEARING-ROLLER WASHER WASHER WASHER WASHER WASHER WASHER WASHER WASHER WASHER WASHER WASHER RING BEARING RETAINING RING SCREEN-SHEET NOT USED SHAFT-SEAL DIFFERENTIAL FROM SERIAL NO. A FLANGE-OUTPUT WASHER SCREW WASHER-TAB RING-PISTON PLUG WASHER SHIM SHIM (1.00 MM) SHIM (1.40 MM) SHIM (1.20 MM) SHIM SHIM SHIM SHIM SHIM SHIM (1.80 MM) SHIM (1.70 MM) SHIM (1.60 MM) SHIM (1.50 MM) SHIM (0.20 MM) SHIM S= SHIM (0.50 MM) SHIM (1.30 MM) SHIM (1.10 MM) HOUSING-G/SHIFT SCREW-HEXAGON CAPSCREW CAPSCREW SCREW SCREW-HEXAGON PIN-CYLINDRICAL SPRING PISTON SHIM RING SHIM RING SHIM RING SHIM SHIM CAPSCREW 04/03 (ECN )