Hollow cone nozzles.
|
|
|
- Melanie Kennedy
- 5 years ago
- Views:
Transcription
1 Absorption Chemical process engineering Cooling isinfection esuperheating ust control Fire protection Foam destruction Gas treatment umidification of air, goods, or textiles Oil spraying Protection of storage tanks ing onto filters ing over germinating boxes Water recooling and many others... 61
2 Axial hollow cone nozzles nozzles produce the smallest average droplet sizes of any purely hydraulic nozzle. Axial hollow cones create the smallest droplets of any type of hollow cone nozzle. The spiral grooves in the swirl inserts of these nozzles ensure an efficient whirling of the liquid which creates uniform droplets throughout and maximizes the total exposed surface area. Creation of such a spray means that the liquid can be absorbed faster, cool quicker, and moisturize better for more effective application spraying. As a result, these nozzles are suitable for applications where fine, uniform spray is required, such as for cooling and cleaning of gas, absorption processes, dust control, product dampening, oil spraying, and air humidifying. Finest droplet particles Narrow free cross-sections Maximum spray : 90 Tangential hollow cone nozzles Tangential hollow cone nozzles also provide a very uniform hollow cone spray. This is due to the right- flow the fluid takes inside the nozzle body. An off-center inlet combines with the 90 turn the fluid makes to create a whirling rotation of the liquid within the nozzle chamber, ultimately resulting in smaller droplets and a consistent distribution upon discharge. With tangential hollow cones, spray s up to 130 can be achieved. ue to their insert-free interiors, tangential hollow cone nozzles are basically self-cleaning and resistant to clogging, even with rather poor water conditions. Typical applications for tangential hollow cone nozzles include: air humidification in air conditioning systems, spray pond cooling, cooling of plastic pipes after extrusion, and gas cleaning in chemical and environmental engineering installations. Coarser droplets than axial hollow cone nozzles Large free cross-sections Wide spray s up to 130 Self-cleaning, clog-resistant Cumulated volume distribution Velocity distribution by number
3 Axial-low flow Series 220 Extremely fine, fog-like hollow cone spray. isinfection umidification Cooling.87".31" 1/4" NPT Strainer Nozzles of series 220 replace series 212 which are still available on request. ex 17 Ø.59" Type Material no. AISI 430F* AISI 316L* Connection Male Mesh size Strainer iam. 72 psi Theoretical 72.5 psi (5 bar) 1 /4" Y NPT (in.) (in.) (in.) psi psi bar psi psi psi psi =4" =100mm BC BC BC BC BC BC Example Type + Material no. + Conn. = for ordering: Y + BC = Y. BC The integrated strainer avoids clogging of the nozzle and increases its service life. * Materials Mat. no. ousing Nozzle insert Strainer 11 AISI 430F AISI 430F AISI 316L 1Y AISI 316L AISI 316L AISI 316L 63
4 Axial-low flow for retaining nut Series 226 nozzle for assembly with retaining nut. Extremely fine, fog-like hollow cone spray..08" Ø.58" Strainer isinfection umidification Cooling.71" ex 17 Ø.5" iam. Theoretical Type Material no. (in.) psi (5 bar) (in.) (in.) (in.) psi psi bar psi psi psi psi =4" =100mm AISI 303* Mesh size Strainer Example Type + Material no. = for ordering: = The integrated strainer avoids clogging of the nozzle and increases its service life. * Materials Mat. no. ousing Nozzle insert Strainer 16 AISI 303 AISI 430F AISI 316L
5 Axial-low flow Series 214 / 216 Precision axial design offers fine atomization and uniform distribution. Swirl insert removable for cleaning. Gas cooling or cleaning Steam de-superheating drying ust suppression imensions (in.) thread Size ex Approx. Wt. Male NPT Size A B (lb.) Brass Type Material no. 316 SS Brass xxx. YY. BA 1/8 11/ xxx. YY. BC 1/4 11/ xxx. YY. BC 1/4 7/ xxx. YY. BE 3/8 7/ iam. (in.) 40 psi Male NPT /8" 1 /4" /8" (in.) (in.) psi psi bar psi psi psi psi =10" BA BC BA BC BA BC BC BE BC BE BC BE BC BE BC BE BC BE BC BE BC BE BC BE Example Type + Material no. + Conn. = for ordering: BC = BC This product line is also available in larger capacities up to 5 40 psi. Please contact Lechler if you require a larger size. 65
6 Axial-flow Series 2TR nozzle with fine uniform spray. Assembly with retaining nut..58 umidification of air Cooling of gases ust control ing onto filters Material: ousing POM Insert: Ceramic Weight:.007 lb. Color iam. 40 psi (in.) (in.) psi psi bar psi psi psi psi =10" 80 2TR C8 Magenta TR C8 Black TR C8 Orange TR C8 Green TR C8 Yellow TR C8 Blue TR C8 Red TR C8 Brown Materials Material no. Nozzle housing Nozzle insert C8 POM Zirconium Oxide Bases and Caps for Mounting Inlet Outlet NPT Male Male Part No. 1/4" 11/16 x XX. 10 3/8" 11/16 x XX. 10 1/4" 3/8 BSPP XX. 11 3/8" 3/8 BSPP XX. 12 Caps To fit 11/16x XX. 00 To fit 3/8 BSPP XX. 00 Standard Materials: SS 30 Brass Other materials available. See Accessories beginning on page 127. A listing of alternatives for various assembly possibilities is shown in the Accessories section beginning on page
7 Tangential-flow Series 302 Plastic version Uniform hollow cone spray using a clog-resistant design umidification Air washing ust collectors Pasteurizer cooling lines Tunnel coolers ø 1.14" 1.08" x x Weight:.03 lb. 3/8" FEMALE NPT.65" 1.34" x x Weight:.04 lb. ø.89" 3/8" FEMALE NPT iameter (in.) Type Material no. 30 psi Female 3 /8" 3 /8" NPT BSPP (in.) (in.) psi psi bar psi psi psi psi psi =10" =20" Nylon PP BF BF BF BF BF BF BF BF BF BF BF BF BF Example Type + Material no. + Conn. = for ordering: BF = BF A listing of alternatives for various assembly possibilities is shown in the Accessories section beginning on page
8 Tangential-flow TWISTLOC quick release mount Series 302 Plastic version Uniform hollow cone spray using a clog-resistant design. Connects by hand with a quick twist. 1.42".98" umidification Air washing ust collectors Pasteurizer cooling lines Tunnel coolers.66" 7/8" EX Weight:.03 lb..86".22" ø1.16" Type Material no. Conn. Nylon POM iameter 30 psi Twistloc (in.) (in.) psi psi bar psi psi psi psi psi =10" =20" KB KB KB KB KB KB KB KB KB KB KB Example Type + Material no. + Conn. = for ordering: KB = KB Plastic TWISTLOC mounting system These nozzles mount by hand with a quarter turn using Lechler s TWISTLOC bases and accessories
9 Tangential-flow Ramp Bottom Series 373 spray with fine droplets and uniform distribution even at low pressure. Patented swirl chamber design with builtin ramp extends service life. Wet scrubbers Gas cooling and conditioning ust suppression Chemical reactors pond cooling imensions (in.) Inlet (Female NPT) A B (ex) C Wt. (lb.) Angle in degrees at Type Mat. no. Connection Female NPT " 1 1 /4" 1 1 /2" 2" 3" (in.) psi psi psi psi bar psi psi psi psi psi psi psi 316 SS / / / / / / BN BN BQ BQ BS BS BW BW MB * 62** MB * 68** - * degree is for 3 psi ** degree is for 7 psi Example Type + Material no. + Conn. = for ordering: BS = BS This product line is also available in larger capacities with inlets up to 6" in size. Please contact Lechler if you have an application requiring a larger size. A listing of alternatives for various assembly possibilities is shown in the Accessories section beginning on page
Hollow cone. nozzles
Absorption Chemical process engineering Cooling isinfection esuperheating ust control Fire protection Foam destruction Gas treatment umidification of air umidification of goods umidification of textiles
Hollow cone. nozzles
Absorption Chemical process engineering Cooling isinfection esuperheating ust control Fire protection Foam destruction Gas treatment umidification of air umidification of goods umidification of textiles
Full cone nozzles.
nozzles Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling esuperheating ust control Fire protection Foam control as treatment ing onto mats in air washers ing over packings
Hollow Cone Spray Nozzles Series
Hollow Cone Spray Nozzles Series TANK WASHING HOLLOW CONE APPLICATION Absorption Chemical process engineering Cooling Disinfection Desuperheating Dust control Fire protection Foam destruction Gas treatment
Full cone nozzles. Axial-flow full cone nozzles
Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling esuperheating ust control Fire protection Foam control Gas treatment ing onto mats in air washers ing over packings Surface
Absorption Chemical process engineering Cooling Disinfection Desuperheating Dust control Fire protection Foam destruction Gas treatment
Absorption Chemica process engineering Cooing isinfection esuperheating ust contro Fire protection Foam destruction Gas treatment umidification of air umidification of goods umidification of texties Oi
WILSON SPRAY NOZZLE. Manufacturer since INDUSTRIAL SPRAY NOZZLES for
Manufacturer since 1994 INDUSTRIAL S for Scrubbing, Rinsing, Descaling, Coating, Curing, Fogging, Etching, Mixing, Tank Cleaning, Quenching, Humidification, Spray Drying, Defoaming, Pulp Bleaching, Cold
CJ Series Flat Spray Nozzles For Air & Saturated Steam CJ The following description will help to explain our Part Number/ Code in relation to the SPRAYTECH Spray Nozzle. EXAMPLE ORDERING. SPRAYTECH CJ
SPRAY CHARACTERISTICS Mist at low pressure; fog at high pressure Spray pattern: Cone-shaped Fog Flow rates: to l/min
MicroWhirl Fine tomization Outstanding atomization Rugged pinless design Drip-free performance 70 micron polypropylene filter Safety wire hole available Patented design Minimum operating pressure 7 Mist
Section E Fine Spray Nozzles
Section E Fine Spray s Overview Our fine spray hydraulic atomizing nozzles are available in two styles. Standard s: Traditional threaded nozzles made of metal. Quick-Connect s: Consisting of a nozzle body
YARWAY NARVIK MODEL 88 SPID SMALL PIPE INLINE DESUPERHEATER
A wide range of desuperheaters, pneumatic actuators, strainers to satisfy all specifications of the power, pulp and paper industry and process gas applications FEATURES Fabricated construction Special
Liquid Strainers. Protect nozzles, valves and pumps from damaging debris. Experts in Spray Technology Spray Nozzles. Spray Fabrication.
Experts in Technology Nozzles Control Analysis Fabrication Liquid Strainers Protect nozzles, valves and pumps from damaging debris. Table of Contents T Strainers Low to Medium Pressure TW...3 TWC...3 TWF...4
MAXIMUM FREE PASSAGE FULLJET SPRAY NOZZLES UNIQUE DESIGN MINIMIZES CLOGGING, PROVIDES SUPERIOR PERFORMANCE
MAXIMUM FREE PASSAGE FUJET SPRAY NOZZES UNIQUE DESIGN MINIMIZES COGGING, PROVIDES SUPERIOR PERFORMANCE The liquid comes in contact with the vane as it enters the nozzle. The unique vane design stabilizes
F o a m C o n t r o l C l e a n i n g
Full Cone s Absorption Fire Protection Chemical Injection Rinsing F o a m C o n t r o l C l e a n i n g Gas Treatment esuperheating Mist Elimination Cooling ust Control B Full Cone s Introduction CHOOE
Lances and nozzle headers
Sanitary Retractable Lances Standard Flanged Lances Tank Cleaning Lances STAMM Showers Pneumatic Atomizing Air Blowoff Quick Disconnect Flat Fan Plastic Specialty 141 Lances Custom fabricated for your
Nessie Water Mist Nozzles
Data Sheet Nessie Water Mist Nozzles Applications The nozzles are tailored to atomize water in high pressure water mist systems. The nozzles are very suitable for applications within e.g.: Humidification
FLOW TEK VALVES & CONTROL S INC
FLOW TEK VALVES & CONTROL S INC e-mail:- info@flowagevalves.com PLOT NO-172,173, ROAD NO-4, KATHWADA, G.I.D.C. AHMEDABAD. PHONE NO:- 079-22900219,22900220, MOBILE:-09824539702, 9824080899. an ISO 9001
Section H Spray Guns. Table of Contents
Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.
Hollow Cone Nozzles. Gas cooling Sulfur Burning dust control water aerating chemical Production Cooling m e t a l T r e a t i n g w A S H i n g
Hollow one s Gas cooling ulfur urning dust control water aerating chemical Production ooling m e t a l T r e a t i n g w H i n g gas scrubbing brine spraying product degreasing D1 HOO ON NOZZ INTRODUTION
SPRAY NOZZLES. A GLOBAL PRODUCT GUIDE to the most frequently specified nozzles for general industrial applications
Delavan Distributor Deutschland: VIPTech GmbH Web www.duesen.de Mail anfrage@duesen.de Tel: + 49 07022 948 735 Fax + 49 07022 948 636 SPRAY NOZZLES A GLOBAL PRODUCT GUIDE to the most frequently specified
ProMax QuickJet Spray Nozzles. For trouble-free performance and fast maintenance. Experts in Spray Technology. Spray Nozzles.
Experts in Technology Nozzles Control Analysis Fabrication ProMax QuickJet Nozzles For trouble-free performance and fast maintenance Overview Quick-change spray technology ensures trouble-free performance
Pneumatic atomizing nozzles ViscoMist flat fan, external mix Series 176
nozzles ViscoMist flat fan, external mix Versatile design with builtin pneumatic needle valve for liquid flow control and automatic clean-out. Three nozzle body configurations offer flexible tailoring
Pounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
UNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE -
UNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE - Uni-Spray Nozzles... are injection molded from custom blended polypropylene, a cost effective material that is corrosion and heat resistant and is impervious
CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING
AIR SPRAY NOZZLES CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING C1 AIR NOZZLES INTRODUCTION LARGEST SELECTION OF NOZZLES IN
Quick-disconnect spray nozzles
ZIP-TIP Quick-disconnect spray nozzles + = ZIP-TIP BODY STNDRD O-RINGS ZIP-TIP TIP COMPETE UNIT BEX ZIP-TIP quick-disconnect spray nozzles are designed to allow fast and easy installation and removal of
Heavy Duty Que - Temp Desuperheater Model: 13 / 23
Narvik covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp & paper industry and
TEEJET SWIVELS & 45 NOZZLES BODIES
TEEJET SWIVELS & 45 NOZZLES BODIES 45 QUICKJET Poly construction Self aligning tip cap Accepts standard twist lock cap, tip & screen Max 125 PSI In MPT Out 5699 1/4" Twist Lock 45 Poly construction nozzle
Increase Turbine Output. Gas Turbine Inlet Cooling
Increase Turbine Output Gas Turbine Inlet Cooling AMCO GAS TURBINE DIRECT SPRAY INLET COOLING AMCO provides extensive engineering, manufacturing, and application knowledge of Inlet direct spray cooling
R O L L C O O L I N G F L A T J E T N O Z Z L E
6 S R I S R O L L C O O L I N G F L A T J T N O Z Z L NW! Patent Pending The correct alignment of the roll cooling nozzles on the spray header is essential for optimal roll cooling. Flat jets are the preferred
Hollow Cone Nozzles. Gas cooling Sulfur Burning dust control water aerating chemical Production Cooling m e t a l T r e a t i n g w A S H i n g
Hollow one s Gas cooling ulfur urning dust control water aerating chemical Production ooling m e t a l T r e a t i n g w H i n g gas scrubbing brine spraying product degreasing D1 HOO NOZZ INTRODUTION
Spray Guns. Choice of Materials and Capacities
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 30 to 800 PSI. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
R O L L C O O L I N G F L A T J E T N O Z Z L E
6 S R I S R O L L C O O L I N G F L A T J T N O Z Z L NW! Patent Pending The correct alignment of the roll cooling nozzles on the spray header is essential for optimal roll cooling. Flat jets are the preferred
Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling Desuperheating Dust control Fire protection Foam control Gas
Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface
GUNJET NUMBER AA143-AL-*-10 A C A C
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 2 to 55 bar. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
Pounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
Flat fan nozzles. Nozzle characteristics
Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning
MODEL: HV-AS & HV-BS TECHNICAL DATA : MAINTENANCE DESCRIPTION PRESSURE (3/4 NPT OPTIONAL)
High Velocity Water Spray Nozzle MODEL: HV-AS & HV-BS TECHNICAL DATA : MAXIMUM WORKING PRESSURE EFFECTIVE WORKING PRESSURE 12 Bar (175 PSI) 3.5 Bar to 10.5 Bar (50-150 PSI) END CONNECTION MATERIAL 3/4
DEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS
I. PARTS: A. 1 pc. Cyclone Portable Injector B. 1 pc. Foot Strainer & 1/4" I.D. Tubing. C. 1 pc. Ceramic Weight. D. 1 pc. Instruction Sheet D. 2 pc. 3 hose w/ female x female GHT fittings on both ends
Nozzle Features. For advice on nozzle choice please call +44 (0) or
This section provides information on the factors that influence spray characteristics: liquid flow, spray pattern, angle, droplet size and spray impact. It also offers advice on choosing the of nozzle
Beverage industry Bioengineering Chemical industry Cosmetic industry Food industry Pharmaceutical industry Tank building and many others...
Beverage industry Bioengineering Chemical industry Cosmetic industry Food industry Pharmaceutical industry Tank building and many others... Tank cleaning nozzles Tank cleaning nozzles General design families
Beverage industry Bioengineering Chemical industry Cosmetic industry Food industry Pharmaceutical industry Tank building and many others...
Beverage industry Bioengineering Chemical industry Cosmetic industry Food industry Pharmaceutical industry Tank building and many others... Tank cleaning nozzles Tank cleaning nozzles General design families
IRRIGATION IMPACT SPRINKLERS CATALOGUE 2012
IRRIGATION IMPACT SPRINKLERS CATALOGUE 2012 Tel Aviv-Jaffa, Israel E-mail: argos@argosinvest.net Website: www.argosinvest.net AR044 :: PERFORMANCE DATA full circle, plastic impact sprinkler, 1/2" male
YARWAY NARVIK MODEL 60/70 STANDARD DUTY SLN-TEMP DESUPERHEATER
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp and paper industry and
Extremely uniform liquid distribution Wide flow rate range Large number of available spray angles
Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface
Right Angle Nozzle Assembly
Swirl- Air atomizing nozzle Features: Large internal passages with no vanes or cores assure unrestricted flow... Little chance for clogging No external struts or supports to interfere with spray pattern
K-BALL SERIES SPRAY NOZZLES
K-BALL SERIES NOZZLES K-Ball Clip-on spray nozzles CHARACTERISTICS: These nozzles simply clip over a pre-drilled pipe (9/16 dia. hole) and are available with a variety of spray balls, in various spray
Sprayer Equipment. Aerial Pesticide Applications. Ground-based Pesticide Applications. Airblast Sprayers. Hand Operated Sprayers.
Revised: March 12 Aerial Pesticide Applications Many pesticides may be applied by either fixed-wing aircraft or by helicopters. The main advantage of aerial spraying is that it can be carried out quickly
Standard Duty A.T.S.A. - Temp Desuperheater Model 24 / 34
Narvik-Yarway covers requirements for desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp & paper industry
AUTOMATIC SPRAY NOZZLES COATING DISPENSING GLAZING LAMINATING ROBOTIC APPLICATIONS MARKING FLAVORING HUMIDIFYING LUBRICATING MOISTURIZING
AUTOMATIC SPRAY NOZZLES COATING DISPENSING GLAZING LAMINATING ROBOTIC APPLICATIONS MARKING FLAVORING HUMIDIFYING LUBRICATING MOISTURIZING B1 AUTOMATIC NOZZLES INTRODUCTION INTRODUCTION If your application
YARWAY NARVIK MODEL 33/43 STANDARD DUTY QUE-TEMP DESUPERHEATER
Yarway covers requirements for desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp and paper industry and
OIL BURNER NOZZLES
INDEX Accessories... 14-6 14-8, 14-10 DELAVAN Available Nozzle Sizes... 14-5... 14-2 Hago OIL BURNER Nozzles B Solid Cone Black Caps... 14-3 DFN Dual Filtration White Caps... 14-4 EH Extra Hollow Cone
Beverage industry Bioengineering Chemical industry Cosmetic industry Food industry Pharmaceutical industry Tank building and many others...
Beverage industry Bioengineering Chemical industry Cosmetic industry Food industry Pharmaceutical industry Tank building and many others... Tank cleaning nozzles General design families Shared characteristics:
Available in aluminum only. SETTING C STRAIGHT STREAM SPRAY. Maximum Horizontal Throw
Type 43L & 43H GunJet Spray Guns AA43 GunJet Designed and built for heavy-duty service. Stem extends through extension to valve seat located directly behind orifice disc for drip-free shutoff and instant
Atomizing Spray Nozzles All stainless steel construction for durability and corrosion resistance!
Atomizing All stainless steel construction for durability and corrosion resistance! What Are Atomizing Nozzles? EXAIR s Atomizing atomize fluids (most commonly water) in a range of spray patterns for a
1/8" to 1/4" female conn. Flow rates of 1 gpm and greater at 40 psi (3.8 lpm and greater at 2.8 bar)
VEEJET NOZZES FAT SPRAY OVERVIEW: VEEJET SPRAY NOZZES Flat spray pattern distributes the liquid as a flat- or sheet-type spray Uniform distribution over a wide range of flow rates and pressures Spray angles
Precision Spray Nozzles and Accessories Edition ASEAN. B est Valu e
Quick Delivery Precision Spray Nozzles and Accessories Edition ASEAN B est Valu e INCREASE YOUR PRODUCTIVITY WITH LECHLER SPRAY TECHNOLOGY. Lechler GmbH is a German family-owned company located in Metzingen
Nozzles, Nozzle Systems and Droplet Separators for the Shipbuilding Industry
Nozzles, Nozzle Systems and Droplet Separators for the Shipbuilding Industry LECHLER YOUR COMPETENT PARTNER FOR NOZZLE AND SEPARATOR TECHNOLOGY Lechler is Europe s No. 1 and is also one of the leading
Standard Duty Que - Temp Desuperheater Model: 33 / 43
Model: 33 / 43 Narvik-Yarway covers requirements for desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp
NOZZLE TYPES AND CHARACTERISTICS
95 NOZZLE TYPES AND CHARACTERISTICS Dennis w. Bintner Design Engineer Delavan Hanufacturing Company West Des Moines, Iowa The many varieties of herbicides on the market today, make the proper selection
590G Series Golf Spray Head. 590G Series Golf Spray Head. Variable Arc 4, 6, 12 Pop-up X-Flow and Check-O-Matic Standard.
590G Series Golf Spray Head 590G Series Golf Spray Head Variable Arc 4, 6, 12 Pop-up X-Flow and Check-O-Matic Standard Specifications Radius: 2' 18' (,6 5,5m) Maximum operating pressure: 75 psi (5,2 Bar)
Twist & Dry. Twist & Dry Component System SPECIAL PURPOSE. Same day shipping for wear parts! Tungsten Carbide Options
Twist & Dry TO DER: specify pipe size, connection type, 108 Twist & Dry Component System The Twist & Dry series of nozzles was designed and developed for the spray drying industry, with the dryer operator
TEEJET VARI-SPACING NOZZLES
PRO SERIES TEEJET VARI-SPACING NOZZLES For use with all interchangeable Spray Tips For operating pressures up to 125 p.s.i. TeeJet Vari-Spacing Nozzles permit the construction of spray booms with adjustable
ST/HM. Automatic Spray Gun SERIES FUSO SEIKI CO., LTD. Increased productivity and cost savings by using a lightweight, compact and powerful spray gun
F U S O S E I K I C O., L T D Automatic Gun Increased productivity and cost savings by using a lightweight, compact and powerful spray gun ST/HM SERIES FUSO SEIKI CO., LTD. Catalog No. CG-98E-1 Application
OWNER S MANUAL REMOTE CONTROL, DUAL HEAD FOGGING SYSTEMS
OWNER S MANUAL Sentinel II 5500 REMOTE CONTROL, DUAL HEAD FOGGING SYSTEMS Read all instructions carefully before starting the installation. Save this manual for future use. 2 OWNER S MANUAL SAFETY Always
Yarway Narvik Desuperheater Model 18/54 and 28/64 Heavy Duty
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide of models, sizes and materials to satisfy the specifications of the power, pulp and paper industries along with
Flat Fan Nozzles. Flat Fan nozzles can be used fo washing, rinsing and surface treatments including high pressure nozzles used at up to 200 bar.
vailable in a wide range of spray angles and flows. Liquid is forced through an oval or eliptical orifice to form a sheet of spray that breaks into ligaments and then droplets or is atomised by impacting
aquakit U Specifications Last revision: 09/07/2016 aquabrass.com
aquakit U-22-007 Specifications Last revision: 09/07/2016 aquakit U-22-007 Specifications Last revision: 09/07/2016 DEMI-TOTEM 12123 1/2 thermostatic valve with 2-way or 3-way diverter - CALGreen High
NARVIK-YARWAY. Heavy Duty A.T. - Temp Desuperheater Model: 18/54 and 28/64
NARVIK-YARWAY Narvik-Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp &
Precision Spray Nozzles for the Chemical Industry
Precision Spray Nozzles for the Chemical Industry PROSS OPTIMIZATION WIT NOZZL TCNOLOGY Any company that wants to keep ahead of the competition needs to constantly optimize its production processes. In
Multiple Nozzle Body Assemblies for Dry Booms
Multiple Nozzle Body Assemblies for Dry Booms QJ350 Compact Nozzle Body for Dry Booms n Compact design means easier mounting and less interference with boom structure. n Available with 3 or 5 spray positions
WATER SPRAY NOZZLE DATA SHEET
FIRE FIGHTING EQUIPMENT DATA SHEET WATER SPRAY NOZZLE DATA SHEET JOB NO. : RFQ. NO. : ISSUE : SHEET OF 01 CUSTOMER: ITEM NO. : 02 PROJECT : QUANTITY : 03 LOCATION : SERVICE : FIRE WATER SYSTEM 04 05 06
Cash Valve. A Series. Pressure Regulators. Flow Control. Issued - January 2001 CAVMC-0508-US-0609 ISO 9001 Certified
Cash Valve A Series Pressure Regulators Issued - January 2001 CAVMC-0508-US-0609 ISO 9001 Certified Flow Control A Series - General Information Type A series pressure reducing and regulating valves automatically
aquakit U Specifications Last revision: 09/07/2016 aquabrass.com
aquakit U-22-013 Specifications Last revision: 09/07/2016 DEMI-TOTEM 12123 1/2 thermostatic valve with 2-way or 3-way diverter - CALGreen High performance 1/2 thermostatic valve European made solid brass
Model BPS-09-Npt. Stainless Steel Back Pressure Bypass Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model BPS-09-Npt Stainless Steel Back Pressure Bypass Valve
Low Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
YARWAY NARVIK STANDARD DUTY A.T.-TEMP DESUPERHEATER MODEL 38/48
Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp and paper industry and
GENERAL PURPOSE SPRAY NOZZLES CTG UG20 BR
GENERAL PURPOSE SPRAY NOZZLES CTG UG20 BR www.pnr-nozzles.com INTRODUCTION INDEX Page INDEX SPRAY TECNOLOGY 1 SPRAY PATTERNS 3 NOZZLE IDENTIFICATION CODES 5 FULL CONE NOZZLES 6 FLAT JET NOZZLES 27 OLLOW
Tank cleaning nozzles
nozzles Beverage industry Bioengineering Chemical industry Cosmetic industry Food industry Pharmaceutical industry Tank building and many others... How to choose the right tank cleaning nozzle The following
MNSD-V MULTIPLE NOZZLE SPRAY DESUPERHEATER BULLETIN 1144 SEPTEMBER 2001
MNSD-V MULTIPLE NOZZLE SPRAY DESUPERHEATER BULLETIN 1144 SEPTEMBER 2001 MNSD V MULTIPLE NOZZLE SPRAY DESUPERHEATER Multiple Nozzle Spray Desuperheater Offers High Temperature Capabilities and Low Class
Standard Duty SLN - Temp Desuperheater Model: 50 / 60
Narvik-Yarway covers requirements for Desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power-pulp & paper industry
MNSD-V MULTIPLE NOZZLE SPRAY DESUPERHEATER BULLETIN 1144 APRIL 2004
MNSD-V MULTIPLE NOZZLE SPRAY DESUPERHEATER BULLETIN 1144 APRIL 2004 MNSD V MULTIPLE NOZZLE SPRAY DESUPERHEATER Multiple Nozzle Spray Desuperheater Offers High Temperature Capabilities and Low Class V Leakage
SPRAY NOZZLE TECHNOLOGY
Identification of Lechler nozzles and filters Flow rate Density Conversion factors for different densities Coverage Nozzle arrangement in the system Flat-jet nozzles Hollow cone nozzles Calculation formula
Standard Duty A.T.-Temp Desuperheater for cryogenic processes
Narvik-Yarway covers requirements for desuperheaters, pneumatic actuators, strainers with a wide range of models, sizes and materials to satisfy all the specifications of the power, pulp & paper industry
Car Wash / Pressure Washer
Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask
NEW! BOOSTER PUMPS. HBP/HBPS series 4" horizontal booster pumps. booster pumps
HBP/HBPS series 4" horizontal The HBP/HBPS Series Booster Pumps are the most durable available. The patented SignaSeal floating impeller design minimizes thrust loads, allowing for continuous operation
Pressure transmitters for heavy duty applications MBS 3200 and 3250
Data sheet Pressure transmitters for heavy duty applications MBS 3200 and 3250 The compact high temperature pressure transmitter MBS 3200 is designed for use in hydraulic and almost all industrial applications,
Yarway Narvik Model 37 and 47 Cryogenic injector
Cryogenic injector for LNG applications Features Fabricated construction High quality stuffing box with PTFE Chevron rings Variable nozzle type Wide range of K v (C v ) available Special nozzle combinations
TUNGSTEN CARBIDE TIPS FOR HIGH-PRESSURE SPRAYING
TUNGSTEN CARBIDE TIPS FOR HIGH-PRESSURE SPRAYING TUNGSTEN CARBIDE TIPS SAVE ADHESIVES, COATINGS, PAINT, CHEMICALS & ELECTRICITY In high-pressure spraying applications, the high velocity of the liquid through
GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN
GREEN GARDE MODEL JD9-C - HIGH PRESSURE SPRAY GUN Guns Spray 38500 Model JD9-C - 38500 The JD9 heavy-duty spray gun can help make your operation more effective and profitable. Check these advantages. Adjustable
Pressure transmitters for heavy duty applications Type MBS 3250
Pressure transmitters for heavy duty applications Type MBS 3250 Features Designed for use in harsh industrial environments For medium and ambient temperatures up to 125 C With integrated pulse-snubber.
INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS. 143
8 INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS www.charlandthermojet.com 143 T-70 SERIES INDUSTRIAL AUTOMATIC SPRAY NOZZLE GUN Ideal for many cleaning tasks in every kind of industrial
GENERAL PURPOSE SPRAY NOZZLES CTG UG20 BR
GENERAL PURPOSE SPRAY NOZZLES CTG UG20 BR www.pnr-nozzles.com INTRODUCTION INDEX Page INDEX SPRAY TECNOLOGY 1 SPRAY PATTERNS 3 NOZZLE IDENTIFICATION CODES 5 FULL CONE NOZZLES 6 FLAT JET NOZZLES 27 OLLOW
Precision Spray Nozzles for the Food and Beverage Industry
Precision Nozzles for the Food and Beverage Industry LECHLER YOUR COMPETENT NOZZLE TECHNOLOGY PARTNER The food and beverage industry is facing enormous challenges. To offer consumers a more extensive product
Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050
Data sheet Pressure transmitter for general industrial purposes MBS 3000 and MBS 3050 The compact pressure transmitter, type MBS 3000, is designed for use in almost all industrial applications, and offers
SECTION Pressure & Temperature Control
16 Pressure & Temperature Control ARMSTRONG PRODUCT CATALOGUE 70 Pressure Reducing s Pressure Reducing s Armstrong pressure reducing valves (PRVs) and temperature regulators help you manage steam, air
A1 SERIES COMMERCIAL GRADE METERS A1 SERIES COMMERCIAL GRADE METERS
COMMERCIAL GRADE METERS Look for the silver label! Look for the silver label! COMMERCIAL GRADE METERS Commercial Grade Meters are designed as self-contained, battery powered units. These indicating meters
HOSES & LANCES. Hoses & Lances 15,000 PSI (1,034 BAR)
HOSES & LANCES Jetstream provides a full arrangement of hoses and flex lances for high pressure waterblasting. The hoses and lances are designed to be durable and reliable for any 15,000 psi application.
Foam Supply Kits FOAM EDUCTORS FOAM EDUCTORS FOAM EDUCTORS FOAM SUPPLY KITS
FOAM SUPPLY KITS Foam Supply Kits Elkhart offers two supply kits. Both kits include: One.75" quarter-turn, inlet valve assembly with elbow Quick-connect female coupling Quick-connect plug with chain Brushed
TECHNICAL DATA SHEET. Medium Velocity Water Spray Nozzle. Page 1. Description. Technical and Environmental Specification. Installation & Maintenance
Description The LIFECO s are open type (non-automatic nozzles, designed for directional spray application in fixed fire protection system. Medium velocity water spray nozzle has an external deflector,