Car Wash / Pressure Washer
|
|
- Denis Lucas
- 5 years ago
- Views:
Transcription
1 Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask us today for more information!
2 TRIGGER GUNS NO-WEEP GUN TEMP PSI GPM MATERIAL INLET OUTLET Brass 1/4 FPT 1/8 FPT Brass 1/4 FPT 1/4 FPT Brass 3/8 FPT 1/4 FPT 6519P Brass 3/8 FPT 1/4 FPT 6520P Brass 3/8 FPT 1/4 FPT 5030NP Brass 3/8 FPT 1/4 FPT 6525P Brass 3/8 FPT 1/4 FPT NO-WEEP GUN, CERAMIC BALL, AND VITON O-RING 4840-CB Brass 1/4 FPT 1/4 FPT NO-WEEP SWIVEL GUN 5090NW Brass 3/8 FPT 1/4 FPT 5090P Brass 3/8 FPT 1/4 FPT NO-WEEP SWIVEL GUN, CERAMIC BALL, AND VITON O-RING 5030NP-CV Brass 3/8 FPT 1/4 FPT 5090NW-CV Brass 3/8 FPT 1/4 FPT 5030NP TRIGGER GUN Repair kit for use with: NP 5044W 5030NPW 5044W NPW-1 High Weep Gun 5044V 5030NP-CV No-Weep Gun 6520PKIT 6520P No-Weep Gun and 6520WP Weep Gun 6525PKIT 6525P No-Weep Gun and 6525WP Weep Gun 4830K 4830 No-Weep Gun 4840K 4840 and 4860 No-Weep Gun 4840WK 4860W Weep Gun and 4840W Weep Gun 5090K 5090NW No-Weep Gun 5090WK 5090W Weep Gun 5090K 4830K WEEP GUN 2 TEMP PSI GPM MATERIAL INLET OUTLET 4860W Brass 3/8 FPT 1/4 FPT 6520WP Brass 3/8 FPT 1/4 FPT 5030NPW Brass 3/8 FPT 1/4 FPT 6525WP Brass 3/8 FPT 1/4 FPT HIGH WEEP GUN 5030NPW Brass 3/8 FPT 1/4 FPT WEEP SWIVEL GUN 5090W Brass 3/8 FPT 1/4 FPT 5090W 6525P 6520P 5030NPW 6519P V 6520PKIT JETTER NOZZLES 1/8 S.S. JETTER NOZZLE DESCRIPTION GPM TCS45S1F 1/8 Corner 4.5 TLS45S1F 1/8 Laser 4.5 TCS55S1F 1/8 Corner 5.5 TLS55S1F 1/8 Laser 5.5 TRS55S1F 1/8 Ram 5.5 1/4 S.S. JETTER NOZZLE DESCRIPTION GPM TCS45S2F 1/4 Corner 4.5 TLS45S2F 1/4 Laser 4.5 TRS45S2F 1/4 Ram 4.5 TCS55S2F 1/4 Corner 5.5 TLS55S2F 1/4 Laser 5.5 TRS55S2F 1/4 Ram 5.5 RAM NOZZLE The wide spray pattern of the RAM nozzle provides maximum thrust to propel the hose down the line while providing thorough pipe cleaning action as the hose is pulled back. LASER NOZZLE Power penetrating forward jet of the LASER nozzle cuts through ice, sludge and grease while still providing the thrust to propel the hose down the line. CORNERING NOZZLE A single jet at 90 degrees to the rear facing jets allows the hose to negotiate tight 90 degree bends or tees. This nozzle will get through bends that the other nozzles won t make. TCS55 TLS55 3
3 WANDS WAND ACCESSORIES SEAMLESS CHROME PLATED WANDS INSULATED / REMOVABLE WAND HANDLE SIZE TEMP PSI GPM INLET OUTLET SIZE TEMP 5175D18P /4 MPT 1/4 MPT 5178D18P /4 MPT 1/8 FPT 5175D24P /4 MPT 1/4 MPT 5178D24P /4 MPT 1/8 FPT 5175D36P /4 MPT 1/4 MPT Handle is moved easily to different locations on the wand For standard diameter non-molded wands Handle comes with 8 screws and 2 anti-slip bushings D36P /4 MPT 1/8 FPT 5175D47P /4 MPT 1/4 MPT 5175D59P /4 MPT 1/4 MPT WITH MOLDED GRIP HANDLE 5188D18P /4 MPT 1/4 MPT 5178M18P /4 MPT 1/8 FPT BREAK-AWAY FITTINGS 5188D24P /4 MPT 1/4 MPT MATERIAL INLET OUTLET 5178M24P /4 MPT 1/8 MPT 5188D36P /4 MPT 1/4 MPT 5175D24P 5188D24P 5068 Brass 1/4 MPT 1/4 FPT 5069 Brass 3/8 MPT 3/8 FPT 5178M36P /4 MPT 1/8 MPT 5188D47P /4 MPT 1/4 MPT 5188D59P /4 MPT 1/4 MPT 5188D70P /4 MPT 1/4 MPT Fitting is designed to break before damage occurs to the gun or the wand Max. twist 55 foot lbs. Max. side load 60 foot lbs WITH ADJUSTABLE INSULATED HANDLE 5170D /4 MPT 1/4 MPT 5170D /4 MPT 1/4 MPT 5170D /4 MPT 1/4 MPT 5170D /4 MPT 1/4 MPT 5170D /4 MPT 1/4 MPT WANDS W/BLACK PLASTIC MOLDED FLEX HANDLE SIZE TEMP PSI GPM INLET OUTLET GALVANIZED FLEX WAND /4 MPT 1/8 FPT 5200M /4 MPT 1/4 MPT WAND ENDS MATERIAL INLET OUTLET 5151 Plated Steel 1/4 FPT 1/4 FPT 5161 Plated Steel 1/4 FPT 1/8 FPT 5171 Brass 1/4 FPT 1/8 FPT 5181 Brass 1/4 FPT 1/4 FPT Fits on 1/4 MPT wands, molded or non-molded 5151 ZINC PLATED FLEX WAND 5200Z /4 MPT 1/8 FPT 5200MZ /4 MPT 1/4 MPT S.S. TWIN LANCE WITH VENTED GRIP 5200Z SIZE TEMP PSI GPM INLET OUTLET 5250D36P /4 MPT (2)1/4 FPT Designed for low pressure soap and high pressure rinse 5170D36 WAND END NOZZLE PROTECTOR MATERIAL 5152 Rubber D36P Flared rubber adapter protects objects from being easily scratched or chipped by metal wand ends. Fits JE Adams wand ends 5151, 5161, 5171 or
4 HOSE ACCESSORIES SPRAY TIPS REUSABLE HOSE COUPLING MATERIAL INLET OUTLET 1/8 Stainless Steel Spray Tips 1/4 Stainless Steel Spray Tips 1/8 MEG Spray Tips 1/4 MEG Spray Tips FOR USE ON 1/4 RUBBER/WIRE BRAIDED HOSE 3015 Plated Steel - NPT 1/4 FPT 1/4 MPT FOR USE ON 3/8 RUBBER HOSE 3014 Plated Steel - NPT 3/8 FPT 1/4 MPT FOR USE ON 3/8 RUBBER/WIRE BRAIDED HOSE Plated Steel - NPT 3/8 FPT 3/8 MPT Reverse thread female section onto your hose, thread male section into female to secure coupling to hose. You may connect the hose coupling directly to a variety of female threaded guns, sockets or swivels HOSE REELS PSI CAPACITY HOSE ID 12 WITH SWIVEL /8, DIVIDED HOSE REEL WITH SWIVEL WITH SWIVEL /8, 250 Direct hand crank rewind Light-weight and compact Full flow 90 brass swivel Adjustable drag brake to eliminate hose backlash while unreeling hose Reel handle product temperatures from -22 F to +225 F Specify thread size, spray angle and orifice size when ordering. HOW TO DETERMINE NOZZLE SIZE: Choose degree of spray pattern Example: 15 = 15º 25 = 25º 40 = 40º Available spray patterns: 00, 15, 25, 40, 50, 65, 80 Calculate GPM & PSI to determine nozzle size Example: 1500 PSI at 4.3 GPM = nozzle size of Determine J.E. Adams part number Example: T1505S2M T + S _ M º Spray pattern Nozzle size Fitting size 1 = 1/8 2 = 1/4 Threads M = Male F = Female 6 S = Stainless steel M = MEG 7
5 SWIVELS LOW PRESSURE MATERIAL TEMP PSI INLET OUTLET REPAIRABLE 5055 Brass /8 MPT 3/8 FPT NO 5056 Brass /8 MPT 1/4 FPT NO SWIVELS 7084 Repair kit for 7045, 7065, 7080, and K Repair kit for 7070, 7480, and HIGH PRESSURE W/S.S. INSERT MATERIAL TEMP PSI INLET OUTLET REPAIRABLE 7480 Brass /4 FPT 1/4 MPT YES 7045 Brass /8 FPT 3/8 FPT YES 7065 Brass /4 MPT 3/8 FPT YES 7070 Brass /8 MPT 1/4 FPT YES 7080 Brass /8 MPT 3/8 FPT YES 7470 Stainless Steel /4 MPT 1/4 FPT YES 7044 Stainless Steel /8 MPT 3/8 FPT YES K 7030K Repair kit for 7030 and K Repair kit for 7475 HIGH PRESSURE 90 BOOM SWIVELS 7044 MATERIAL TEMP PSI GPM INLET OUTLET REPAIRABLE 7030 Brass /8 MPT 3/8 FPT YES 7035 Stainless Steel /8 MPT 3/8 FPT YES Low torque application 7030K 7475K Long-lasting dust seal HIGH PRESSURE 90 HOSE REEL SWIVEL MATERIAL TEMP PSI GPM INLET OUTLET REPAIRABLE 7475 Brass /2 FPT 1/2 FPT YES 90 swivel action with Viton O-rings Teflon washer 7030 VISIT OUR NEWLY REDESIGNED WEBSITE AT 7475 FOAM BRUSH SWIVELS MATERIAL INLET OUTLET HOSE BARBS 7016 Brass 1/2 MPT 1/ Brass 1/2 MPT 3/ Brass 1/2 MPT 3/ Brass 3/8 MPT 3/
6 QUICK DISCONNECT PLUGS & SOCKETS QUICK DISCONNECT PLUGS DESCRIPTION MATERIAL PSI 7209P 1/4 M Plug Brass P 1/4 F Plug Brass P 3/8 M Plug Brass P 3/8 F Plug Brass P 1/4 M Plug Plated Steel P 1/4 F Plug Plated Steel P 7196P 3/8 M Plug Plated Steel P 3/8 F Plug Plated Steel P 1/4 M Plug Stainless Steel P 1/4 F Plug Stainless Steel P 3/8 M Plug Stainless Steel P 3/8 F Plug Stainless Steel P TWIST DISCONNECT COUPLERS & PLUGS DISCONNECTS DESCRIPTION MATERIAL PSI GPM PLUGS 7638P 1/4 MPT x M 22 F Brass P 1/4 FPT x M 22 F Brass P 7642P 3/8 MPT x M 22 F 3/8 FPT x M 22 F Brass Brass P COUPLERS 7630P 1/4 MPT x M 22 F Brass/Plated Steel P 1/4 FPT x M 22 F Brass/Plated Steel P 3/8 MPT x M 22 F Brass/Plated Steel P 7640P 3/8 FPT x M 22 F Brass/Plated Steel Secure twist connection QUICK DISCONNECT SOCKETS DESCRIPTION MATERIAL PSI 7210P 1/4 M Socket Assy Brass P 1/4 F Socket Assy Brass P 3/8 M Socket Assy Brass P 3/8 F Socket Assy Brass P 1/2 F Socket Assy Brass P 1/2 M Socket Assy Brass P 1/4 M Socket Assy Stainless Steel P 1/4 F Socket Assy Stainless Steel P 3/8 M Socket Assy Stainless Steel P 3/8 F Socket Assy Stainless Steel 6300 Ball bearing snap connection Click lock design 7243P 7210P QUICK DISCONNECT GARDEN HOSE ADAPTER DESCRIPTION MATERIAL INLET OUTLET 7455P Garden Hose Socket Brass 3/4 F 1/2 F 7465P Garden Hose Plug Brass 1/2 M 3/4 M 7465P 7455P 7640P 7635P 10 REPLACEMENT O-RINGS DESCRIPTION MATERIAL 7109D13 1/4 Socket O-Ring EPDM 7109D14 3/8 Socket O-Ring EPDM 7109D37 1/2 Socket O-Ring EPDM 7109D26 1/4 Socket O-Ring Viton 7109D40 3/8 Socket O-Ring Viton 7109D42 1/2 Socket O-Ring Viton O-rings for flow-thu quick disconnect sockets (Standard: EPDM with Teflon coating) 7109D14 We work harder to provide you solutions! 11
7 DOWNSTREAM INJECTORS STANDARD, NON-ADJUSTABLE TEMP PSI GPM MATERIAL DRAW RATE INLET OUTLET Brass 10% 3/8 MPT 3/8 MPT Brass 10% 3/8 MPT 3/8 MPT Brass 10% 3/8 MPT 3/8 MPT Brass 10% 3/8 MPT 3/8 MPT DOWNSTREAM INJECTORS STANDARD, ADJUSTABLE TEMP PSI GPM MATERIAL DRAW RATE INLET OUTLET Brass 10% 3/8 MPT 3/8 MPT Brass 10% 3/8 MPT 3/8 MPT Brass 10% 3/8 MPT 3/8 MPT Brass 10% 3/8 MPT 3/8 MPT Brass body with stainless steel orifice Used for introducing chemicals into a system downstream Pressure Drop: 35% minimum. Viton O-Rings. Draw rates can be affected by the pressure, flow rate, length of hose and chemical viscosity MAXI-FLOW, NON-ADJUSTABLE TEMP PSI GPM MATERIAL DRAW RATE INLET OUTLET Brass 20% 3/8 MPT 3/8 MPT Brass 20% 3/8 MPT 3/8 MPT Brass 20% 3/8 MPT 3/8 MPT Brass 20% 3/8 MPT 3/8 MPT Brass body with stainless steel orifice Used for introducing chemicals into a system downstream ACID INJECTOR, ADJUSTABLE TEMP PSI GPM MATERIAL DRAW RATE INLET OUTLET A Brass 10% 3/8 MPT 3/8 MPT A Brass 10% 3/8 MPT 3/8 MPT A Brass 10% 3/8 MPT 3/8 MPT A Brass 10% 3/8 MPT 3/8 MPT Brass body with stainless steel orifice Used for introducing chemicals into a system downstream Brass long body with stainless steel orifice 7296 MAXI-FLOW, ADJUSTABLE ACID INJECTOR, NON-ADJUSTABLE TEMP PSI GPM MATERIAL DRAW RATE INLET OUTLET A Brass 20% 3/8 MPT 3/8 MPT A Brass 20% 3/8 MPT 3/8 MPT A Brass 20% 3/8 MPT 3/8 MPT A Brass 20% 3/8 MPT 3/8 MPT Acid injectors have a ceramic ball TEMP PSI GPM MATERIAL DRAW RATE INLET OUTLET Brass 20% 3/8 MPT 3/8 MPT Brass 20% 3/8 MPT 3/8 MPT Brass 20% 3/8 MPT 3/8 MPT Brass 20% 3/8 MPT 3/8 MPT Brass long body with stainless steel orifice ACID INJECTOR, ADJUSTABLE Repair kit for 7261, 7262, 7263, and K Repair kit for 7296, 7297, 7298, and 7299 A7296K Repair kit for A7296, A7297, A7298, and A7299 TEMP PSI GPM MATERIAL DRAW RATE INLET OUTLET A Brass 20% 3/8 MPT 3/8 MPT A Brass 20% 3/8 MPT 3/8 MPT A Brass 20% 3/8 MPT 3/8 MPT A Brass 20% 3/8 MPT 3/8 MPT Acid injectors have a ceramic ball A K A7296K A7291K 7337 Repair kit for 7271, 7272, 7273, and 7274 A7337 Repair kit for A7271, A7272, A7273, and A K Repair kit for 7291, 7292, 7293, and A7291K Repair kit for A7291, A7292, A7293, and A K 13
8 DOWNSTREAM INJECTORS QUICK INJECTORS LONG BODY, NON-ADJUSTABLE NON-ADJUSTABLE GPM MATERIAL DRAW RATE INLET OUTLET TEMP PSI GPM MATERIAL DRAW RATE SOCKET PLUG Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 FPT 3/8 MPT Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 FPT 3/8 MPT Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 FPT 3/8 MPT Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 FPT 3/8 MPT Brass body with stainless steel orifice Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 MPT 3/8 FPT LONG BODY, ADJUSTABLE GPM MATERIAL DRAW RATE INLET OUTLET Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 MPT 3/8 FPT Brass construction with stainless steel ball Acid resistant special composition ball 35% minimum pressure drop is needed to activate the injector Streamline your combination injector/quick disconnect assembly Brass 10% 3/8 MPT 3/8 MPT Brass 10% 3/8 MPT 3/8 MPT Brass 10% 3/8 MPT 3/8 MPT Brass 10% 3/8 MPT 3/8 MPT 7583P 5-8 Brass 2.3 3/8 MPT 3/8 FPT 7548 ADJUSTABLE TEMP PSI GPM MATERIAL DRAW RATE SOCKET PLUG Brass 10% 3/8 FPT 3/8 MPT Brass 10% 3/8 FPT 3/8 MPT Brass body with stainless steel orifice Brass 10% 3/8 FPT 3/8 MPT Brass 10% 3/8 FPT 3/8 MPT ACID INJECTOR, LONG BODY, ADJUSTABLE GPM MATERIAL DRAW RATE INLET OUTLET A Brass 10% 3/8 MPT 3/8 FPT A Brass 10% 3/8 MPT 3/8 FPT A Brass 10% 3/8 MPT 3/8 FPT A Brass 10% 3/8 MPT 3/8 MPT A Brass 10% 3/8 MPT 3/8 MPT A Brass 10% 3/8 MPT 3/8 MPT Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 MPT 3/8 FPT Brass 10% 3/8 MPT 3/8 FPT Brass construction with stainless steel ball Acid resistant special composition ball 35% minimum pressure drop is needed to activate the injector Streamline your combination injector/quick disconnect assembly 7531 A Brass 10% 3/8 MPT 3/8 MPT Acid injectors have a ceramic ball 7336 REPAIR KIT 7525K Repair kit for all Quick Injectors 7525K 7336 Repair kit for 7541, 7542, 7543, Repair kit for 7546, 7547, 7548, 7549, 7226, 7227, 7228, A7337 Repair kit for A7547, A7548, A7549, A7226, A7227, A7228, A A
9 DETERGENT INJECTORS These brass body injectors allow you to control water flow by means of an external adjusting knob. This allows the injector to cover a broader range of flows, taking much of the guesswork out of injector selection. They may be used on either the upstream or downstream side of the pump. On the upstream side the valve covers a range of PSI. On the downstream side the flow rate is adjustable from 2-8 GPM, with a maximum pressure of 3500 PSI. Operating Temperature 180ºF. The injection rates of these valves are dependent on GPM and pressure, but range from 6%-13% on comes with a metering barb on the chemical inlet and is adjustable from 0-13%, again dependent on GPM and pressure. DETERGENT INJECTORS DESCRIPTION 7650 Detergent Injector 7655 Adjustable Detergent Injector 7650K 7655K DESCRIPTION Repair Kit for Detergent Injector Repair Kit for Adjustable Detergent Injector K K GARDEN HOSE ADAPTERS GARDEN HOSE ADAPTERS DESCRIPTION SIZE MATERIAL 7402 Garden hose fitting 1/4 M Brass 7366 Garden hose nut 3/4 F 1/4 M fitting Brass 7362 Adapter fitting 3/8 F Brass 7367 Adapter fitting 3/8 M Brass 7368 Garden hose fitting 1/2 M, 1 long Brass 7384 Garden hose fitting 1/2 MPT, 1 1/2 long Brass 7369 Filter washer 50 mesh screen Mesh 7371 Plain washer 7199 Spring for 3/8 socket Stainless Steel 5828D2 Garden hose adapter 3/8 MPT Brass 5828D3 Garden hose adapter 1/2 MPT Brass 5836D1 Garden hose swivel F x F Brass 7374P Garden hose assembly 1/2 F Brass 4221 Garden hose assembly 1/2 14BSSP Brass 4222 Garden hose assembly 3/4 14BSSPP w/o-ring Brass CHEMICAL STRAINERS 1/4 uses 1/4 Allen wrench for tightening 3/8 and 1/2 uses 1/2 Allen wrench for tightening 7402 Y-TYPE INTAKE FILTERS/STRAINERS TEMP PSI GMP MATERIAL INLET OUTLET 7574P Brass 1/2 FPT 1/2 FPT 7576P Brass 1 FPT 1 FPT 7574P 50 mesh stainless steel screen HIGH PRESSURE FILTERS 7580P TEMP PSI GMP MATERIAL INLET OUTLET 7580P Brass 1/4 FPT 1/4 MPT 7581P S.S/Brass 1/4 FPT 1/4 MPT 7581P CHEMICAL STRAINERS DESCRIPTION 7160 Chemical Strainer without Check Valve 7165 Chemical Strainer with Check Valve D3 High-impact reinforced nylon 1/8 to 1/4 hose barb ABOVE LISTED STRAINERS WITH 8 OF 1/4 TUBING DESCRIPTION of 1/4 tubing without Check Valve of 1/4 tubing with Check Valve D1 7374P
10 PRESSURE REGULATORS & UNLOADERS PRESSURE REGULATORS & UNLOADERS DESCRIPTION TEMP PSI GPM MATERIAL 7100 Adjustable regulator & unloader Brass Uses replacement spring 7105, brown 7120 Adjustable regulator & unloader Brass with set screw Uses replacement spring 7105, brown 7150 Adjustable regulator & unloader Brass Uses replacement spring 7184, yellow 7300 Adjustable regulator & unloader Brass Uses replacement spring 7301, yellow 7130 Repair kit for 7100, 7120, 7150, and 7300 Long-life, non-corrosive solid stainless steel seat, plunger, ball, and rod Reinforced, glass-filled nylon adjustable knob for easy, wrench-free adjustments (2) 1 4 pipe by-pass (2) 3 8 pipe inlet ports, and (1) 3 8 pipe discharge port adaptable to various assembly applications PRESSURE REGULATORS & UNLOADERS TEMP PSI GPM MATERIAL INLET OUTLET BYPASS 7100P Brass 3/8 F 3/8 F (2) 3/8 F 7100P Brass 3/8 F 3/8 F (2) 3/8 F 7100P Brass 3/8 F 3/8 F (2) 3/8 F 7100P Brass 3/8 F 3/8 F (2) 3/8 F Adjustable knob PRESSURE REGULATORS & UNLOADERS TEMP PSI GPM MATERIAL INLET OUTLET BYPASS 7300P Brass 3/8 F 3/8 F (2) 1/4 F P4500 PRESSURE REGULATORS & UNLOADERS TRAPPED PRESSURE UNLOADER TEMP PSI GPM MATERIAL INLET OUTLET BYPASS 7900P Brass 3/8 M 3/8 M 3/8 F Adjustable knob Pressure activated PRESSURE REGULATORS & UNLOADERS TEMP PSI GPM MATERIAL INLET OUTLET BYPASS 7800P Brass 3/8 F 3/8 F (2) 3/8 F 7800P Brass 3/8 F 3/8 F (2) 3/8 F 7800PKIT Repair kit for 7800P3650 and 7800P4500 Adjustable knob Built in EZ-Start valve BALANCED PRESSURE REGULATOR DESCRIPTION INLET OUTLET TEMP PSI GPM MATERIAL 7075 Balanced pressure regulator L 3/8 F 3/8 F Brass 7085 Balanced pressure regulator T 3/8 F 3/8 F Brass 7097 Repair kit for 7075 and 7085 Designed for smooth operation on weep and non-weep operations No minimum bypass required Outer brass construction with internal stainless steel seat and piston 7900P P PKIT Adjustable knob 7100PKIT Repair kit for 7100P1500, 7100P2900, 7100P3650 & 7100P PKIT Repair kit for 7300P3600 PUMP INLET/ BYPASS ASSEMBLY PUMP INLET ASSEMBLY DESCRIPTION MATERIAL P /2 NPS Brass 4236 INLET MANIFOLD DESCRIPTION MATERIAL PKIT 7300PKIT /2 NPT (1) 1/4, NPS port Brass
11 VALVES VALVES SAFETY RELIEF VALVES EASY START VALVE TEMP SIZE PSI GPM MATERIAL SIZE MATERIAL INLET OUTLET /8 MPT Brass 7310Q 1 hex. Brass 3/8 NPT 1/8 NPT /8 MPT Brass 7310K4 Repair Kit /8 MPT Brass /8 MPT Brass Especially designed for high pressure portable washer systems to make starting easier 7310Q /8 MPT Brass Rebuildable/Repairable /8 MPT Brass Stainless steel spring, ball and seat, brass body /8 MPT Brass Discharge should be plumbed back into the port /2 MPT Brass /2 MPT Brass /2 MPT Brass /2 MPT Brass /2 MPT Brass /2 MPT Brass /2 MPT Brass 7426 STUBBY THERMAL RELIEF VALVES TEMP SIZE MATERIAL /2 NPT Brass THERMAL RELIEF VALVES 7310K4 Designed for self-cleaning of circular area chamber and piston head Water continues to circulate, eliminating build-up of mineral and waste products Excess pressure vented out through discharge fitting, preventing damage to pump Stainless steel spring 3/8 hose barb discharge fitting Adjustable set screw allows setting relief valve for discharge at your specific pressure Safety relief valves are tested but are not preset 7468K TEMP MATERIAL INLET OUTLET SIDE VENT PORT Brass 1/2 MNPT 1/8 NPSF Brass 3/8 MNPT 1/8 NPSF Brass 1/4 MNPT 1/8 NPSF 7592V 140 Brass 3/8 MNPT Space Saver 7597V 170 Brass 3/8 MNPT Space Saver BRASS HOSE BARB FITTING 7469 Brass 1/8 MNPT Can be threaded into side vent port. Compatible with 7585 and Repair kit for PSI, 3/8 and 1/2 Safety Relief Valves 7468K CHECK VALVE Repair kit for 3500 PSI, 3/8 and 1/2 Safety Relief Valves PSI MATERIAL INLET OUTLET 7097 To prevent overheating and pump failure the Thermal Relief Valve should be installed in the by-pass line. The valve will automatically sense the rise in temperature and discharge some of the hot fluid causing the cooler fluid to enter the system and the valve will then close. The total elapsed time from when the valve opens, until it closes is 2 to 5 seconds. 1/4, 3/8 or 1/2 M NPT threads for mounting Internal O-ring seal - Viton External O-ring seal - Buna Stainless steel spring, brass body V Brass 1/4 MPT 1/4 MPT 1 PSI opening pressure
12 VALVES MAXI-FLOW CHECK VALVES TEMP PSI GPM SIZE MATERIAL INLET OUTLET Brass 1/4 FPT 1/4 FPT Brass 3/8 FPT 3/8 FPT Stainless Steel 1/4 FPT 1/4 FPT Stainless Steel 1/4 MPT 1/4 FPT Stainless Steel 1/4 FPT 1/4 MPT Stainless Steel 1/4 MPT 1/4 MPT 7359 Repair kit for 1/4 and 3/8 Maxi-flow Check Valves FLOW CONTROL VALVE WITH PLASTIC KNOB TEMP PSI MATERIAL INLET OUTLET 7320P Brass 1/4 Port 5/8 Shaft NOTES 7320P CUSTOM MANUFACTURING AVAILABLE! 22 23
13 Car Wash / Pressure Washer PARTS & ACCESSORIES RD AVENUE S.W. CEDAR RAPIDS, IA PHONE: FAX: TOLL FREE: TOLL FREE FAX: We have many representatives in all 50 states. Give us a call to locate the one nearest you!
HIGH PRESSURE SPRAY GUNS &ACCESSORIES
HIGH PRESSURE SPRAY GUNS &ACCESSORIES Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Built in hose swivel Max. PSI: 4000 PSI Max. GPM: 10 GPM Weight 18 oz. TEEJET PW4000 Max. PSI: 4000
More informationHIGH PRESSURE SPRAYERS
S S STRAIGHT THROUGH QDS FITTINGS AND SWIVELS NOZZLES SPRAY GUNS AND WANDS 337 NOZZLES QUICK DISCONNECT NOZZLE 0-degree red tip nozzle, 15-degree yellow tip nozzle, 25-degree green tip nozzle, 40-degree
More informationGUNS & LANCES. Legacy AP1000 Trigger Guns. MV 920 Gun. Linear Trigger Guns. M407 Trigger Gun. Giant Trigger Guns. Your One Stop Shop for Parts
Legacy AP1000 Trigger Guns The World s most popular and easiest to repair trigger gun!!! PSI: 4500 Weight: 19 oz 9.802-229.0 353010 AP1000 8.710-414.0 353010W AP1000 Weep 8.704-157.0 109856 Unitized Valve
More informationYour One Stop Shop for Parts GUNS & LANCES
Your One Stop Shop for Parts 7 Legacy AP1000 Trigger Guns The World s most popular and easiest to repair trigger gun!!! PSI: 4500 Weight: 19 oz 9.802-229.0 353010 AP1000 8.710-414.0 353010W AP1000 Weep
More informationGUNS & LANCES. Linear Trigger Guns. Legacy Best Trigger Guns. Legacy Industrial Trigger Guns. Giant Trigger Guns. PA Trigger Guns.
Legacy Best Trigger Guns The most comfortable and longest lasting gun on the market!!! Weight: 21 oz Ideal for commercial cleaning & long work time applications. Quantity price breaks at 10 and 25 guns
More informationPressure Washers Water Pumps Trash Pumps Generators
Pressure Washers Water Pumps Trash Pumps Generators 2017 catalog Assembled in the USA What makes TOP GUN Different... The quality of components and workmanship shows in each and every Top Gun Model. We
More informationGUNS. YRL51 Gun. ST-1100 Lightweight Gun MTM Gun AL35. MV920 Karcher Style Gun. Spray Guns. ST-810 Front Entry MV2005.
GUNS YRL51 Gun ST-1100 Lightweight Perfect for cold water units or smaller hot water units 7 GPM 3050 PSI 300 F. max 13.2 GPM maximum 4050 PSI maximum 6267 4126 ST-1100 MTM407 7 GPM maximum 250 F. maximum
More informationPRESSURE WASHERS Davis Road, Suite J Elgin, IL (800) Professional 2018 Price List
PRESSURE WASHERS 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Professional 2018 Price List 2018 For more information, contact Lorchem Technologies at: (800)
More informationACCESSORIES FOR TODAY S DIRT WARRIORS POWERPLAY CLEANING TOOLS POWERPLAY SPRAY NOZZLES POWERPLAY GUNS, LANCES AND HOSES
ACCESSORIES FOR TODAY S DIRT WARRIORS POWERPLAY SPRAY NOZZLES POWERPLAY CLEANING TOOLS POWERPLAY GUNS, LANCES AND HOSES ATTACH & CONQUER Enhance your Powerplay Pressure Washer with the tools that set apart
More informationTable of Contents WARRANTY
H.E.R.O. Industries a division of Middlefield Bancorp Limited 2719 Lake City Way, Burnaby, B.C., Canada Phone: ( 604 ) 420-6543 Fax: ( 604 ) 420-8725 Toll Free: 1-800-494-4376 E-mail: sales@hero.ca Website:
More informationPounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
More informationShaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560
Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;
More informationcatalog & price list components and accessories for high pressure cleaners and car wash industry
catalog & price list components and accessories for high pressure cleaners and car wash industry MTM Hydro srl Corporate Headquarters Cherasco, Italy MTM Hydro is not responsible for typographical errors.
More informationLow Pressure Series - Accessories. High Pressure Series - Accessories
Low Pressure Series - Accessories STCO 50 Low Pressure Variable Spray Gun - Bronze Max. Pressure: 0Bar(50PSI) Inlet: /2 FBSP Max. Flow: 6GPM(23Lt/Min) 60 C(40 F) STCO 50-SS Low Pressure Variable Spray
More informationPRESSURE WASHERS PSI Amps Weight...94 lbs. Switch, cord and plug included. 25' Steel wire. braided hose. Powder coated frame
gas powered pressure washers PRESSURE WASHERS Engine....Honda GC160 (5.0 hp) Pump....Axial GPM....2.1 PSI...2500 Weight...71 lbs. EZ-Grip garden hose fittings. 25' Steel wire braided hose 2950 PSI Front
More informationParts and Accessories
Parts and Accessories For a full list of available pressure washer parts and accessories, visit www.landa.com. 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com Hypro
More informationShaft No. of Part # Old No. Model No. Housing Rotation dia Rollers Seals. NOTE: CI = Cast-Iron, N = Ni-Resist, SL = Silver Last
Hypro Roller Pumps Ideal for farm sprayers, pest control and chemical application usage. Housings available in cast-iron, Ni-resist or silver series Self-priming operation; roller pumps should not be run
More informationCM-2800-OMVC & CM-2804/3304-OMHC PARTS LIST
8650 Enterprise Drive, Peosta IA 52068 319-556-7484 / Fax 319-556-1235 CM-2800-OMVC & CM-2804/3304-OMHC PARTS LIST Vanguard Engine Oil Grade: Vanguard Engine Oil Capacity: Honda Engine Oil Grade: Honda
More informationSection H Spray Guns. Table of Contents
Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.
More informationWA 2719 ( 604 ) ( 604 ) , H.E.R.O.
a division of Middlefield Bancorp Limited 2719 Lake City Way, Burnaby, B.C., Canada Phone: ( 604 ) 420-6543 Fax: ( 604 ) 420-8725 Toll Free: 1-800-494-4376 E-mail: sales@hero.ca Website: www.hero.ca U.S.
More informationHOT WATER PRESSURE WASHER BREAKDOWN
HOUR METER TACH / HOUR ON OFF THERMOSTAT BURNER OFF 29 9 20 28 25 4 23 24 3 2 34 33 0 5 8 9 7 6 6 ITEM PART NUMBER DESCRIPTION QTY. 85.600.220 Frame 2 N/A Engine, 3 HP, 389cc (GX390 2QNR) 2 85.578.50 Engine,
More informationWestpak USA, Inc. manufactures wands, detail tools, hard surface tools, valves, fittings, hose reels, and sprayers for the carpet cleaning industry.
Westpak USA entered the wand business to manufacture wands that were thoroughly engineered and designed to be the best in the industry. Our wands, hand tools, valves, and spin tools are fully designed
More informationWestpak USA, Inc. manufactures wands, detail tools, hard surface tools, valves, fittings, hose reels, and sprayers for the carpet cleaning industry.
Westpak USA entered the wand business to manufacture wands that were thoroughly engineered and designed to be the best in the industry. Our wands, hand tools, valves, and spin tools are fully designed
More informationDEMA MODEL 693T FOAM STATION II INSTALLATION INSTRUCTION
1. PARTS CHECKLIST: 2. INSTALLATION: DEMA MODEL 93T FOAM STATION II ITEM DESCRIPTION QTY. A. Foam Station Assembly 1 B. ¼ ID Tubing & Foot Strainer 1 C. 3/ ID Tubing & Foot Strainer 1 D. Ceramic Weight
More informationDEMA MODELS 606T INSTALLATION INSTRUCTIONS
I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit TABLE 1 Hose I.D. 3/8" 1/2" 5/8" Max. Length 15 ft.
More informationDEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 606T-WI INSTALLATION INSTRUCTIONS I. PARTS: A. Select-O-Spray Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit E. 1 Pc.
More informationHOSES. nozzle BRASS QUICK SEWER NOZZLE TAPE WASHER HIGH PRESSURE HOSE TOOLS TURBO HIGHER PSI RATING. o rings WASH SOAP CHISELING FLUSHING BLASTING
PRESSURE WASHER CENTER CATALOG BRASS QUICK coupling HIGH PRESSURE HOSE o rings TAPE HOSES HIGHER PSI RATING WASHER TURBO nozzle TOOLS for the trade SEWER NOZZLE WASH SOAP CHISELING FLUSHING BLASTING brass
More informationDEMA MODEL 604T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 604T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (604T Only) E.1 Pc. Backflow Preventer
More informationOPERATOR S MANUAL. To locate your local Kärcher Commercial Pressure Washer Dealer nearest you visit
OPERATOR S MANUAL MODEL ORDER # MODEL HD 2.0/10 Ed 1.575-250.0 DE-201007D HD 1.9/15 Ed 1.575-251.0 DE-201507D HD 2.8/10 Ed 1.575-252.0 DE-301007D HD 3.5/20 Ea 1.575-253.0 DE-352007A To locate your local
More informationSERVICE PARTS LIST SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 13 HP DIRECT DRIVE PRESSURE WASHER CATALOG NO
SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS HP DIRECT DRIVE PRESSURE WASHER CATALOG NO. 555-22 SERVICE PARTS LIST STARTING SERIAL NUMBER B06A REVISED BULLETIN PAGE OF BULLETIN NO. 5-20-000 DATE
More informationPumps & Accessories catalogue
PSC SYSTEMS COMPANY INC. Pumps & Accessories catalogue Phone: (800) 246-9689 Email: parts@pscclean.com Fax: (905) 738-9259 Website: www.pscclean.com TABLE OF CONTENTS - pg. 1 CUSTOMER SERVICE DEPARTMENT
More informationPounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
More informationCAR WASH BAY ACCESSORIES
CAR WASH BAY ACCESSORIES Yamada Pumps Air-powered double diaphragm pump, Reliable Performance Since 1905. The answer to difficult product transfer problems. Air-drive allows freedom from electrical hazards
More informationTOP SELLER G21295C. ITEM# TYPE FEATURES TEMP. INLET OUTLET FITTINGS GPM PSI PRICE G21295C Weep Light Pull Trigger. Light Pull Trigger 300º 3/8 F 1/4 F
50 SPRAY GUNS WEEP TRIGGER GUNS Allow water to drip from gun at all times to prevent water from freezing in the gun and hose. SPRAY GUNS G21290C TOP SELLER G0115 G21295C GIANT SHUT OFF SPRAY GUNS TYPE
More informationDEMA MODEL 692T FOAM STATION I INSTALLATION INSTRUCTION
1. PARTS CHECKLIST: ITEM DESCRIPTION QTY. A. Foam Station Assembly 1 B. #10 Screw & Anchor Kit Set (Total: 4 Screws & 4 Anchors) 1 C. Ceramic Weight 1 D. ¼ ID Tubing & Foot Valve Assembly 1 E. Metering
More informationTable of Contents WARRANTY
a division of Middlefield Bancorp Limited 2719 Lake City Way, Burnaby, B.C., Canada Phone: ( 604 ) 420-6543 Fax: ( 604 ) 420-8725 Toll Free: 1-800-494-4376 E-mail: sales@hero.ca Website: //www.hero.ca
More informationINSTRUCTIONS. Fc. -1,<" SERIES ST-261 REGULATING UNLOADER VALVE
INSTRUCTIONS Fc. -1,
More informationLUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
More informationA member of the Interpump Group THE GIRAFFE LINE. High-Pressure Extendable Wands. General Pump is a member of the Interpump Group
THE GIRAFFE LINE ACCESSORIES ACCESSORIES 12 18 24 High-Pressure Extendable Wands General Pump is a member of the Interpump Group 8 Thank you for purchasing a Giraffe extension wand from General Pump. With
More informationTEEJET SWIVELS & 45 NOZZLES BODIES
TEEJET SWIVELS & 45 NOZZLES BODIES 45 QUICKJET Poly construction Self aligning tip cap Accepts standard twist lock cap, tip & screen Max 125 PSI In MPT Out 5699 1/4" Twist Lock 45 Poly construction nozzle
More informationDEMA RAPID FIRE MODELS 6300, , , , 6310, 6300H 6300E, 6300EH, &6310E INSTRUCTION SHEET
I-1002 Pg. 1 of 12 PURPOSE: The RAPID FIRE is a spray system designed with a single knob to control OFF, RINSE and up to two chemicals using a single chemically resistant plastic injector. There is full
More informationHSE M11 (AFTER SERIAL # )
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR HSE-1002-0M11 (AFTER SERIAL #14999999) C US 201473 PUMP OIL GRADE: Mi-T-M #AW-4085-0016 CAPACITY: 11.2 oz FUEL NOZZLE:
More informationDEMA MODELS P203CTC.PI.1,.2,.3 INSTALLATION INSTRUCTIONS
I. PARTS: A. 1 pc. Cyclone Portable Injector B. 1 pc. Foot Strainer & 1/4" I.D. Tubing. C. 1 pc. Ceramic Weight. D. 1 pc. Instruction Sheet D. 2 pc. 3 hose w/ female x female GHT fittings on both ends
More informationHANDGUNS ADJUSTABLE TIPS ACCESSORIES FOR HANDGUNS COUPLERS FIRE HOSE NOZZLE HANDGUNS , 6-12, 6-14 HANDGUN ACCESSORIES
I N D E X ADJUSTABLE TIPS... 6-6 ACCESSORIES FOR... 6- COUPLERS... 6- FIRE HOSE NOZZLE... 6-... 6-, 6-2, 6-4 HANDGUN ACCESSORIES... 6- (COMPLETE WITH LANCES) Hamilton... 6-4 Hypro Lurmark... 6- Lurmark...
More informationNEW CORPORATE HEADQUARTERS OPENING IN THE FALLF OF 2008 CHERASCO, ITAL
NEW CORPORATE HEADQUARTERS OPENING IN THE FALLF OF 2008 CHERASCO, ITAL ALY MTM Hydro is not responsible for typographical errors. Copyright 2008 MTM Hydro srl MTM Hydro, Srl our Italian parent company
More informationSilver Selection Sprayers Specification Sheet
SVS0055L0077 SVS0095L0077 SVS0150L0077 SVS0225L0077 12 Volt Sprayers with Delavan 7.5l/min 60psi Pumps Unit Specifications Item Details Tank Pump Pressure Regulator Filter 55 Litre 95 Litre 150 Litre 225
More informationHWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
More informationDEMA MODEL 603T-WI INSTALLATION INSTRUCTIONS
DEMA MODEL 603T-WI I. PARTS: A. Select-O-Matic Assembly B. 2 Pcs. Foot Strainers & 1/4" ID Tubing C. 4 Pcs. Mounting Screws & Anchors D. 1 Pc. 100-15K Metering Tip Kit (603T Only) E. 1 Pc. Backflow Preventer
More information1150 Davis Road, Suite J Elgin, IL (800)
www.landa.com Pressure Washer Equipment Detergents Parts & Accessories 1150 Davis Road, Suite J Elgin, IL 60123 (800) 788-8867 info@lorchem.com www.lorchem.com yamada Pumps Air-powered double diaphragm
More informationSINGLE-STAGE INJECTOR MODELS 200-3C, 200C, 201C, 202C, 203C, 204C, 206C, 208C
D E M A SINGLE-STAGE MODELS SINGLE-STAGE MODELS 1. PARTS A. Injector B. Backup washer (Models 204C & smaller). C. Ceramic Weight. D. Tubing 8 long w/ foot strainer. E. Three brass nozzle bushings Metering
More informationDEMA SPRAY STATION II MODEL 606T-2 INSTALLATION INSTRUCTIONS
The 0T-2 Spray Station II Dispensers are used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional
More informationSpray Clean 606T-2 Installation Instruction
Spray Clean 606T-2 Installation Instruction Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.
More informationClick Here To View Item at
Click Here To View Item at www.gappower.com GENERAL'S JET SET OPERATOR S MANUAL EXPLODED VIEW J-200 0 2 2 2 CHAUD! 27 1 1 2 1 1 7 7 0 1 1 22 1 20 1 1 1 17 1 2 2 PRESSURE GAUGE 2 2 DISCHARGE INLET 2 Foot
More informationSERVICE MANUAL MODEL # ORDER # XPERT-HD 3.8/35 P PD DA DD
SERVICE MANUAL MODEL # ORDER # XPERT-HD 3.8/35 P 1.107-108.0 PD4-35324 1.107-096.0 DA-383539 1.107-102.0 DD-383537 1.107-137.0 8.780-001.0 CONTENTS Exploded View... 4 Exploded View Parts List... 5 S.2
More informationKJ Motor/Pump Assembly. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
KJ-000 Motor/Pump Assembly NOTE: Order parts by Number Only. 0 0 0 Gasoline Engine, Hp Manual Start 0 Gasoline Engine, Hp Electric Start Decal, Warning 0 Decal, Fuel Warning Decal, Model. KJ-000 Key, /
More informationHANDGUNS SPRAYING SYSTEMS NO. AA18-AL SPRAYING SYSTEMS NO. AA143-AL HEAVY DUTY TYPE ROTATING HANDLE CONTROL
PRO SERIES SPRAYING SYSTEMS NO. AA18-AL HANDGUNS 3PT SKID HEAVY DUTY TYPE ROTATING HANDLE CONTROL Handle rotates 360 to operate spray gun valve from shutoff to maximum flow position. As handle is turned,
More informationElectric Pressure Washer
FEATURES This lightweight, portable high-pressure washer makes the toughest clean-up tasks faster and easier. Weighing only 43 pounds, you can take it virtually anywhere. Ideal for light industrial applications
More informationPARTS LIST FOR CV MBC. Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: Pump Oil Capacity:
The by Mi-T-M PARTS LIST FOR CV-2100-0MBC Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: 20 oz. Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump Oil Capacity: 4.5 oz. Nozzle
More informationSPRAY GUNS SPRAY GUNS ONE-WASH ( ) fax (662) REPAIR KITS AVAILABLE FOR MOST GUNS.
SPRAY GUNS G290C WEEP TRIGGER GUNS Allow water to drip from gun at all times to prevent water from freezing in the gun and hose. TOP SELLER SPRAY GUNS 54 G0115 G295C GIANT SHUT OFF SPRAY GUNS FEATURES
More informationThe 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse.
Overview The 606T-2 unit is designed to be used as a spray or foam unit where up to two chemicals can be attached to the unit along with a clean water rinse. The unit features three ball valves for control
More informationpro-washpressurewashers.ca 2014/15 Pressure Washer Product Catalogue
pro-washpressurewashers.ca 2014/15 Pressure Washer Product Catalogue LordcoMiniCat.indd 1 3/20/2009 10:48:42 AM Contents Cold Water Pressure Washers 3 3 3 3 3 4 4 4 4 5 5 6 6 7 7 PW-2305G PW-2305GI PW-2705GI
More informationRepair Parts Coulter Applicator Repair Parts
Repair Parts Coulter Applicator Repair Parts,000 Gallon Applicator...,000 Gallon Applicator Frame... Pump Kit...0 Injection Coulter Assembly... Knife Coulter Assembly... Tank Plumbing... Knife and Injection
More informationRocket High Performance Injector. Single Barb. Dual Barb. B Series Injectors. C Series Injectors. Adjustable Water Flow
Rocket High Performance Injector The Rocket injector was designed to be the most versatile venture injector in the marketplace. A superior design that can handle any task you throw at it. Designed to be
More informationSNOW FOAM LANCES PLASTIC SNOW FOAM LANCE PROFESSIONAL SNOW FOAM LANCE SPARE PARTS
8 COMPANY PROFILE BEARFORCE Industries Co.,Ltd is an export-oriented professional manufacturer of snow foam lances and high pressure washer accessories in Xuanchen city, Anhui province, China. Its brother
More informationLEGACY UNIVERSAL UNLOADER (UU1)
LEGACY UNIVERSAL UNLOADER (UU1) The Legacy Universal Unloader is unique in that it allows for height or width adjustments making it ideal for any pump. PSI: 3500 GPM: 6.0 Temperature: 195 F 1/2" NPT Inlet
More informationSystems to be regarded as the # 1 Sanitizing System available on the market. Sage TM
Welcome For over 40 years Sage TM Systems have been leading the world in the manufacture of High Pressure Sanitizing Systems. A commitment to continual product development to reflect the everchanging needs
More informationSPECIFICATIONS FOR PTO DRIVEN ULTRA HIGH PRESSURE FIRE FIGHTING SYSTEM B 2000 M-P SPECIFICATIONS FOR FIRE FIGHTING SYSTEM
SPECIFICATIONS FOR PTO DRIVEN ULTRA HIGH PRESSURE FIRE FIGHTING SYSTEM B 2000 M-P SPECIFICATIONS FOR FIRE FIGHTING SYSTEM HIGH PRESSURE FIRE FIGHTING SPECIFICATIONS Scope and General Design Requirements
More informationPG-35AV-CH Coiled Hose and Spray Valve. PG-8WSAV-08 Lighweight Aluminum Spray Unit
A Pet-Care Pre-Rinse Plumbing Units Products RINSE UNITS T&S Quality Pet-Care Plumbing Products Wash and Rinse Products Replacement Parts Model # Description EB-10K Repair Kit 013539-45 Replacement Hose
More informationKJ Motor/Pump Assembly. Jetter. Printed in U.S.A. Ridge Tool Company/Elyria, Ohio, U.S.A.
KJ-000 Motor/Pump Assembly NOTE: Order parts by Number Only. 0 0 0 Gasoline Engine, Hp Manual Start 0 Gasoline Engine, Hp Electric Start Decal, Warning 0 Decal, Fuel Warning Decal, Model. KJ-000 Key, /
More informationDEMA Model 294D Spray Foam INSTALLATION INSTRUCTIONS
1. PARTS A. Foamer Assembly B. Plastic chemical supply tubing w/ foot valve and ceramic weight C. Metering tip kit D. Outlet hose 25 long (optional accessory) E. Shut-off valve (optional accessory) 2.
More informationABOUT SUTTNER AMERICA
ABOUT SUTTNER AMERICA Suttner, the leading manufacturer of industrial components, has been producing German engineered components for over 48 years. Suttner has a well-known reputation for quality products
More informationTABLE OF CONTENTS Hoses 2 Hose Reels 5 Swivels 7 Quick Connects Spray Guns 11 Lances 14 Spray Nozzles Rotating Nozzles Foam Sprayers
1 TABLE OF CONTENTS Hoses 2 Hose Reels 5 Swivels 7 Quick Connects 9 Spray Guns 11 Lances 14 Spray Nozzles 21 Rotating Nozzles 23 Foam Sprayers 26 Injectors 28 Unloaders 32 Pumps 37 Motors 58 Engine s 61
More informationOwner's Manual. (60 Gallon 3 Point Sprayer w/pump, Coupler, & 7-Nozzle Boom Assembly) Assembly. Information About The Sprayer
Owner's Manual (0 Gallon Point Sprayer w/pump, Coupler, & -Nozzle Boom Assembly) Assembly Most of the sprayer has been assembled at the factory. Join the center boom member to the carrier frame with the
More informationPARTS LIST FOR WP MHB WP MKB WP MSB (AFTER SERIAL # )
PARTS LIST FOR WP-3200-0MHB WP-3200-0MKB WP-3200-0MSB (AFTER SERIAL #10854374) ENGINE OIL GRADE: SAE10W-30 ENGINE OIL CAPACITY: 20 oz. PUMP OIL GRADE: Mi-T-M Pump Oil AW-4085-0016 PUMP OIL CAPACITY: 16.9
More informationSpray Guns. Choice of Materials and Capacities
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 30 to 800 PSI. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
More informationOWNER S MANUAL. ROTARY SURFACE CLEANER Models 105C, 105F, 105CW, & 105FW. Revision 2.01
OWNER S MANUAL ROTARY SURFACE CLEANER Models 105C, 105F, 105CW, & 105FW Revision 2.01 ROTARY SURFACE CLEANER WARNING HIGH PRESSURE CAN CAUSE SERIOUS INJURY, MAXIMUM WORKING PRESSURE IS 4000 P.S.I. Any
More informationDEMA SPRAY CLEAN DISPENSERS MODEL 605T INSTALLATION INSTRUCTION
The 605T Spray Clean Dispenser is used in any application where a chemical product must be sprayed or foamed without the use of compressed air or a high pressure pump. City water pressure and optional
More informationOwner's Manual. Model: SK-61-4R ( ) (60 Gallon Skid Sprayer w/2.5 H.P. Engine, 4-Roller Pump, Deluxe Handgun) Technical Specifications
Owner's Manual Model: SK--R (0) (0 Gallon Skid Sprayer w/. H.P. Engine, -Roller Pump, Deluxe Handgun) Technical Specifications. H.P. Recoil Start Engine Roller Pump - G.P.M. Pressure Relief Valve Pressure
More informationAY-SS Trigger Adapter AA46
98 98 Choice of Materials Spray and Capacities Guns For spot spraying, tree spraying, livestock spraying and power washing at GunJet pressures Number from AA2Spray 30 to 800 Guns PSI. To Length operate
More informationSilver Selection Trailer Sprayers Specification Sheet
SVT0055L0077ZB2 SVT0095L0077ZB2 55 & 95 litre Zero Turn Mower Trailers Unit Specifications Item Details Tank Pump Pressure Regulator Filter 55 Litre 95 Litre Delavan 12 volt (7.5 L/min 60psi) UV stabilised
More informationTABLE OF CONTENTS Hoses 2 Hose Reels 5 Swivels 7 Quick Connects Spray Guns 11 Lances 14 Spray Nozzles Rotating Nozzles
1 TABLE OF CONTENTS Hoses 2 Hose Reels 5 Swivels 7 Quick Connects 9 Spray Guns 11 Lances 14 Spray Nozzles 21 Rotating Nozzles 23 Injectors 28 Unloaders 32 Pumps 37 Motors 58 Engine s 61 Transformers 63
More informationAthletic Field Painting Pointers Line Star Drawing Line Star Parts List 3-4. Spray Boom Drawing Stainless Steel Tank 6
TABLE OF CONTENTS TITLE PAGE Athletic Field Painting Pointers 1 44-508 Line Star Drawing 2 44-508 Line Star Parts List 3-4 Spray Boom Drawing 5 40-127 Stainless Steel Tank 6 4085 Spray Gun 7 40-153 Gun
More informationSpray & Foam Dispenser Item #
Spray & Foam Dispenser Item #92364-00 Spray & Foam Dispenser Item #92364 Table of Contents Section Page 1. Spray & Foam Dispenser Description... 3 2. Spray & Foam Dispenser Installation... 4 3. Chemical
More informationHLP M10 HLP M10 (AFTER SERIAL # )
HLP-1502-0M10 HLP-0703-0M10 (AFTER SERIAL #15023661) PUMP OIL GRADE: SAE30W Non-Detergent PUMP OIL CAPACITY: 11 oz. BTU INPUT: 200, 000 (Vapor Only) PRESSURE NOZZLE: HLP-0703-0M10: 5.5 HLP-1502-0M10: 3.0
More informationCARWASH BAY ACCESSORIES
Yamada Pumps Air-powered double diaphragm pump, Reliable Performance Since 1905. The answer to difficult product transfer problems. Air-drive allows freedom from electrical hazards or explosion-proof motor
More informationGUNJET NUMBER AA143-AL-*-10 A C A C
For spot spraying, tree spraying, livestock spraying and power washing at pressures from 2 to 55 bar. To operate spray gun, handle is rotated 360 from shutoff to maximum flow position. As handle is turned,
More informationMODEL GLC PARTS MANUAL REV.1.02A
Owner s Manual Keep with machine for reference MODEL GLC PARTS MANUAL REV.1.02A CMA DISHMACHINES 12700 KNOTT AVENUE GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-8 95-2 141 MODEL GL-C Parts MANUAL
More informationAir Compressor Pumps. Best Pump Warranty In The Industry. Single Stage Cast Iron Compressor. Two Stage Cast Iron. Compressor C B
106 South Lake Court, Lexington, SC 29073 Tel: 803-356-4777 Fax: 803-356-4737 Air Compressor Pumps Best Pump Warranty In The Industry The Mi-T-M Pump Exchange Program provides pump replacement for the
More informationCW-2505/3004-3MDY PARTS LIST
8650 Enterprise Drive, Peosta IA 52068-0050 319-556-7484 / Fax 319-556-1235 CW-2505/3004-3MDY PARTS LIST ENGINE OIL GRADE: 30W ENGINE OIL CAPACITY: 28 oz. PUMP OIL: MI-T-M #AW-4085-0016 PUMP OIL CAPACITY:
More informationModel RVL-20. Stainless Steel Low-Pressure Diaphragm Relief Valve
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model RVL-20 Stainless Steel Low-Pressure Diaphragm Relief
More informationprogram 6.5HP Honda-Powered Hot Water Washer! commercial pressure washers
2011 program commercial pressure washers 6.5HP Honda-Powered 2 Water Pump! Part# WP-2065HL see page 14 15HP, 9000 Watt Generator With Stainless Steel Control Panel & Six 120V Outlets! Part# BE-9000ER see
More information50 GALLON LAWN & GARDEN SPRAYER
2/04 AS2002, Rev 0 Dethmers Manufacturing Company DOING OUR BEST TO PROVIDE YOU THE BEST 0 GALLON LAWN & GARDEN SPRAYER OWNER/OPERATOR MANUAL ASSEMBLY CALIBRATION OPERATION REPLACEMENT PARTS READ complete
More informationCV MBC (AFTER SERIAL # )
The by Mi-T-M PARTS LIST FOR CV-1750-0MBC (AFTER SERIAL #10015094) Engine Oil Grade: Above 40 F=SAE 30 Below 40 F=SAE10W-30 Engine Oil Capacity: 20 oz. Pump Oil Grade: Mi-T-M Pump Oil #AW-4085-0016 Pump
More informationPARTS LIST FOR WP-3200-HDHB
PARTS LIST FOR WP-3200-HDHB ENGINE OIL GRADE: HONDA/ SUBARU: SAE10W-30 ENGINE OIL CAPACITY: 20 oz. PUMP OIL GRADE: Mi-T-M Pump Oil AW-4085-0016 PUMP OIL CAPACITY: 16 oz. NOZZLE SIZE: 3.0 1 This Parts Listing
More informationDATA SHEET 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER DIRECT DRIVE PLUNGER PUMPS. Brass Electric Models: SPECIFICATIONS U.S. Measure Metric Measure
DATA SHEET DIRECT DRIVE PLUNGER PUMPS Brass Electric Models: 4DX10ER, 4DX15ER, 4DX20ER, 4DX27ER, 4DX30ER See page 8 for complete pump model number selection. FEATURES Fits standard 56C face motors. Stacked
More informationOperator s Manual. Model PSI GPM CS CS
Operator s Manual Model CS1000.22 CS1300.22 PSI 1000 1300 GPM 2.2 2.2 HP 1.5 2.0 Thank you Thank you for selecting our products. Our personnel have proudly made every effort to ensure that your new pressure
More information8650 Enterprise Drive, Peosta IA / Fax
8650 Enterprise Drive, Peosta IA 52068 563-556-7484 / Fax 563-556-1235 PARTS LIST FOR HSE-1002-0M10 (AFTER SERIAL #15004675) HSE-1502-0M10 (AFTER SERIAL #15006316) HSE-2003-0M10 (AFTER SERIAL #15006268)
More informationSERVICE MANUAL
SERVICE MANUAL MODEL # ORDER # HD 3.0/27 G 1.107-270.0 HD3.0/27 GB 1.107-271.0 HD 3.4/35 G 1.107-272.0 HD 3.3/35 GB HD 4.0/40 G HD 4.0/40 GB HD 4.0/40 Ge HD 4.0/40 GeB 1.107-273.0 1.107-274.0 1.107-275.0
More informationAvailable in aluminum only. SETTING C STRAIGHT STREAM SPRAY. Maximum Horizontal Throw
Type 43L & 43H GunJet Spray Guns AA43 GunJet Designed and built for heavy-duty service. Stem extends through extension to valve seat located directly behind orifice disc for drip-free shutoff and instant
More informationBEST SELLERS I know what I want. Water Cannon, Un contacto en Espanol; Ilama al:
BEST SELLERS Water Cannon, Un contacto en Espanol; Ilama al: 800.917.9274 April Best Seller 3.indd 1 2 UNLOADERS AR20890 AR20821 AR20242 AR20992 DIRECT MOUNT UNLOADER CONTROL SETS PART # GPM PSI TEMP INLET
More information