MAXIMUM FREE PASSAGE FULLJET SPRAY NOZZLES UNIQUE DESIGN MINIMIZES CLOGGING, PROVIDES SUPERIOR PERFORMANCE
|
|
- James Mathews
- 6 years ago
- Views:
Transcription
1 MAXIMUM FREE PASSAGE FUJET SPRAY NOZZES UNIQUE DESIGN MINIMIZES COGGING, PROVIDES SUPERIOR PERFORMANCE
2 The liquid comes in contact with the vane as it enters the nozzle. The unique vane design stabilizes the fluid before it enters the swirl region. The swirling liquid passes through the nozzle and breaks up as it exits the nozzle orifice. The spray pattern produced is a well-defined full cone spray pattern. How the MFP FullJet Nozzle Works The large open passages in the nozzle minimize clogging. REDUCE COSTY COGGING PROBEMS WITH MFP FUJET NOZZES UNIQUE DESIGN PROVIDES ARGEST FREE PASSAGE OF ANY FU CONE NOZZE If you re using a conventional full cone nozzle or a competitive maximum free passage nozzle and are challenged by clogging problems, it s time to make a change. Our MFP FullJet nozzles feature a unique vane design and provide the largest free passage available in a full cone nozzle. You ll experience benefits like: Minimized risk of clogging even when using debris-filled or recirculated liquid COMPARING FREE PASSAGE BETWEEN MFP FUJET NOZZES AND STANDARD FUJET NOZZES Particulates that are 30 to 75% larger in diameter can pass through MFP FullJet nozzles without clogging. argest particle to pass through standard full cone nozzles argest particle to pass through maximum free passage full cone nozzles Reduced unscheduled downtime due to clogged nozzles Improved product/process quality by eliminating problems caused by distorted spray patterns due to contaminants trapped in the nozzle spray.com spray Intl. Tel:
3 MFP FullJet Nozzle More uniform distribution throughout the spray True full cone spray pattern UNIQUE DESIGN PRODUCES A MORE UNIFORM SPRAY PATTERN FOR SUPERIOR PERFORMANCE Competitor A arge Free Passage Nozzle Center of spray is light Outer edges of spray are heavy Similar appearance to a hollow cone spray pattern SPRAY PATTERN UNIFORMITY ACROSS THE ENTIRE SPRAY COVERAGE AREA IS ESSENTIA TO OPTIMIZING APPICATION RESUTS Our MFP FullJet nozzles eliminate coverage problems associated with other large free passage nozzles. Competitive nozzles produce a spray pattern more like a hollow cone pattern with heavy edges and light centers. MFP FullJet nozzles produce a true full cone pattern with consistent coverage throughout the entire spray to ensure better cleaning, cooling, quenching, dust suppression and more. Side-by-side testing shows the performance differences between our MFP FullJet nozzles and competitive nozzles. Nozzles tested are of identical size, capacity and spray angle (90 ) and were spraying at 0 psig (.38 bar). Spray pattern photography (above) shows the visible differences in the pattern and distribution data (right), collected while the nozzles were spraying, quantifies the performance differences. Volume Volume MFP FullJet Nozzle Number of collection tubes filled Competitor A arge Free Passage Nozzle Number of collection tubes filled spray.com spray Intl. Tel:
4 -/4" -/" male or female inlet connection, 36 stainless steel " 3" male or female inlet connection, 36 stainless steel A BROAD RANGE OF CAPACITIES, CONNECTIONS AND SPRAY ANGES ENSURES YOU FIND THE PERFORMANCE YOU NEED /8" /4" male inlet connection, brass, 303 stainless steel or 36 stainless steel NEW /8" AND /4" SIZES FOR OW FOW OPERATIONS /8" and /4" threaded male connections. Choice of brass, 303 stainless steel or 36 stainless steel. Vane material same as body material Plus: 3/8" to " threaded male and female connections with 36 stainless steel vane and choice of brass or 36 stainless steel bodies -/4" to 3" threaded male and female connections in 36 stainless steel Spray angles: 60, 90 or 5 Flow rates up to 705 gpm (670 lpm) Operating pressures up to 80 psi (6 bar) MFP FUJET NOZZES ARE IDEA FOR: Applications plagued by clogging problems Washdown of mist eliminator blades, filter pads and distribution plates Washing coal, sand and other minerals Process cooling Gas cooling and flue gas desulfurization Blanching machines Dust suppression Fire protection of off-shore platforms, storage tanks and hazardous loading areas Flooding/deluge fire protection systems Foam control Aerating waste water ORDERING INFORMATION MAXIMUM FREE PASSAGE (MFP) FUJET NOZZE Inlet Conn. Nozzle Type Example Material Spray Capacity Code Angle Size HHMFP SS BSPT connections require the addition of a B prior to the inlet connection. No material code required for brass. Use SS as material code for 36 stainless steel MFP nozzles.
5 PERFORMANCE DATA Inlet Conn. Nozzle Type HMFP HHMFP Capacity Size Approx. Free Passage Dia. Flow Rate Capacity gallons per minute (liters per minute) 0 psi 0 psi (.5 bar) 80 psi (6 bar) ( ) 60 Series 90 Series 5 Series 0 psi 0 psi 0 psi (.) 0.7 (0.7) 0.3 (0.9) 0.30 (.) 0.4 (.5) / (.6) 0.35 (.3) 0.47 (.8) 0.63 (.5) 0.84 (3.) (.0) 0.43 (.6) 0.58 (.3) 0.77 (3.0).03 (3.9) / (.4) 0.70 (.7) 0.94 (3.7).5 (4.9).68 (6.3) (3.). (4.6).6 (6.3).5 (8.4).87 (0.9) (3.).4 (5.3).8 (7.).4 (9.5) 3. (.6) /8.56 (4.0). (8.4).9 (.4) 3.8 (5.0) 5. (9.8) (4.8) 3. (.) 4. (6.5) 5.6 () 7.4 (9) (4.8) 3. (.) 4. (6.5) 5.6 () 7.4 (9) / 5.9 (5.5) 5. (9.4) 6.7 (6) 8.9 (35).7 (46) (6.4) 5.7 () 7.5 (9) 9.9 (39) 3. (5) (7.) 7.0 (7) 9. (36). (48) 6. (63) (7.9) 8.4 (3). (43) 4.6 (57) 9.3 (76) (8.7) 0.0 (38) 3. (5) 7.4 (68) 3 (90) (9.5).0 (46) 5.8 (6) (8) 8 (08) (9.5).0 (46) 5.8 (6) (8) 8 (08) (0.3) 5.0 (57) 9.5 (76) 5 (99) 33 (9) (.) 7.0 (65) (86) 9 (3) 37 (46) (.) 7.0 (65) (86) 9 (3) 37 (46) (.9) 0 (76) 6 (0) 34 (3) 44 (7) / (.7) (84) 9 () 37 (46) 48 (89) (3.5) 4 (9) 3 () 4 (59) 53 (07) (4.3) 6 (99) 34 (3) 44 (7) 57 (4) (3.7) 4 (9) 3 (6) 43 (70) 58 (7) (4.) 6 (99) 35 (37) 47 (84) 63 (46) (4.5) 8 (07) 38 (47) 50 (98) 68 (65) / (5.0) 30 (4) 4 (64) 58 (6) 80 (33) (6.0) 35 (33) 48 (9) 67 (64) 93 (365) (6.8) 40 (53) 55 (8) 77 (30) 06 (48) (7.8) 45 (7) 6 (45) 86 (339) 9 (470) (9.3) 50 (9) 70 (74) 97 (38) 35 (533) (0.8) 60 (9) 84 (39) 6 (459) 6 (639) (.8) 70 (67) 98 (384) 36 (535) 89 (746) (4.6) 80 (305) (439) 55 (6) 6 (85) (5.4) 00 (38) 37 (539) 88 (739) 58 (03) / 00. (30.7) 0 (457) 65 (647) 6 (887) 309 (6) (34.5) 40 (534) 9 (755) 63 (035) 36 (49) (35.8) 70 (648) 33 (97) 30 (57) 438 (73) (5.4) 80 (686) 4 (949) 35 (74) 436 (7) (43.9) 00 (76) 69 (054) 36 (46) 485 (90) (55.9) 40 (94) 3 (65) 433 (699) 58 (8) Maximum free passage diameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. spray.com spray Intl. Tel:
6 DIMENSIONS AND WEIGHTS HHMFP (M) FUJET /8", /4" Hex. /8.7, 3.5, (7.8) 7/ (0.0) /4 7, 0.87 (.) 9/ (0.0) HMFP (F) FUJET 3/8", /", ", ", -/4" AND -/" SIZES 3/8 / -/4 -/ Hex. 4, 3 3 5, , 0 0, 50, 70 70, 00, 0, 40, 60 40, 60, 80, 300, 350, 400, (37.).70 (43.).770 (45.0).0 (53.9).400 (6.0).637 (67.0) (78.0) 3.50 (8.6) (95.3) (.3) 3/6 3/6 -/4-3/8-3/8 - -3/6.4 (0.07).5 (0.07) 4.5 (0.3) 4.6 (0.3) 8.9 (0.5).6 (0.36) 3.3 (0.38).5 (0.64) 30.5 (0.86) 35.3 (.0) Dia. HMFP (F) FUJET ", -/" AND 3" SIZES 500, 600, 700, (65.8) (.5) -/ 000, 00, 400, (03.) 3-3/ (.65) 3 800, 000, (39.8) 4-3/6 4.6 (3.5) HHMFP (M) FUJET 3/8", /", ", ", -/4" AND -/" SIZES 3/8 / -/4 -/ Hex. 4, 3 3 5, , 0 0, 50, 70 70, 00, 0, 40, 60 40, 60, 80, 300, 350, 400, (5.4).70 (43.).5 (3.).98 (55.8).80 (46.0).73 (68.9) 3.00 (78.7) 3.50 (8.6) (95.3) (.3) /6 7/8 -/8-3/8-3/8 - -3/6.4 (0.04) (0.06).4 (0.07) 4.9 (0.4) 5 (0.4).5 (0.33). (0.34).5 (0.64) 3 (0.9) 36.7 (.04) Dia. HHMFP (M) FUJET ", -/" AND 3" SIZES 500, 600, 700, (65.8) (.5) -/ 000, 00, 400, (03.) 3-3/ (.65) 3 800, 000, (39.8) 4-3/6 4.6 (3.5) Based on largest/heaviest version of each type. North Avenue and Schmale Road, P.O. Box 7900, Wheaton, I USA Tel: SPRAY Fax: SPRAY Intl. Tel: Intl. Fax: Bulletin No. 703C Printed in the U.S.A. Spraying Systems Co. 07
F o a m C o n t r o l C l e a n i n g
Full Cone s Absorption Fire Protection Chemical Injection Rinsing F o a m C o n t r o l C l e a n i n g Gas Treatment esuperheating Mist Elimination Cooling ust Control B Full Cone s Introduction CHOOE
More information1/8" to 1/4" female conn. Flow rates of 1 gpm and greater at 40 psi (3.8 lpm and greater at 2.8 bar)
VEEJET NOZZES FAT SPRAY OVERVIEW: VEEJET SPRAY NOZZES Flat spray pattern distributes the liquid as a flat- or sheet-type spray Uniform distribution over a wide range of flow rates and pressures Spray angles
More informationProMax QuickJet Spray Nozzles. For trouble-free performance and fast maintenance. Experts in Spray Technology. Spray Nozzles.
Experts in Technology Nozzles Control Analysis Fabrication ProMax QuickJet Nozzles For trouble-free performance and fast maintenance Overview Quick-change spray technology ensures trouble-free performance
More informationFull cone nozzles.
nozzles Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling esuperheating ust control Fire protection Foam control as treatment ing onto mats in air washers ing over packings
More informationHollow Cone Spray Nozzles Series
Hollow Cone Spray Nozzles Series TANK WASHING HOLLOW CONE APPLICATION Absorption Chemical process engineering Cooling Disinfection Desuperheating Dust control Fire protection Foam destruction Gas treatment
More informationHollow Cone Nozzles. Gas cooling Sulfur Burning dust control water aerating chemical Production Cooling m e t a l T r e a t i n g w A S H i n g
Hollow one s Gas cooling ulfur urning dust control water aerating chemical Production ooling m e t a l T r e a t i n g w H i n g gas scrubbing brine spraying product degreasing D1 HOO ON NOZZ INTRODUTION
More informationFor Applications Demanding Precision and Efficiency, FloMax Nozzles Outperform All Others
Nozzles Control Analysis Fabrication FloMax Air Atomizing Nozzles Unique Atomization Process Provides Unmatched Efficiency in Gas Conditioning Operations For Applications Demanding Precision and Efficiency,
More informationNEW AUTOJET PRECISION SPRAY CONTROL SYSTEM WITH ZONING
NEW AUTOJET 2008+ PRECISION SPRAY CONTROL SYSTEM WITH ZONING INCREASING THROUGHPUT AND DECREASING WASTE IN COATING, LUBRICATING AND DISPENSING OPERATIONS JUST GOT EASIER THAN EVER 98250 Modular Spray Manifold
More informationTUNGSTEN CARBIDE TIPS FOR HIGH-PRESSURE SPRAYING
TUNGSTEN CARBIDE TIPS FOR HIGH-PRESSURE SPRAYING TUNGSTEN CARBIDE TIPS SAVE ADHESIVES, COATINGS, PAINT, CHEMICALS & ELECTRICITY In high-pressure spraying applications, the high velocity of the liquid through
More informationSection E Fine Spray Nozzles
Section E Fine Spray s Overview Our fine spray hydraulic atomizing nozzles are available in two styles. Standard s: Traditional threaded nozzles made of metal. Quick-Connect s: Consisting of a nozzle body
More informationHollow Cone Nozzles. Gas cooling Sulfur Burning dust control water aerating chemical Production Cooling m e t a l T r e a t i n g w A S H i n g
Hollow one s Gas cooling ulfur urning dust control water aerating chemical Production ooling m e t a l T r e a t i n g w H i n g gas scrubbing brine spraying product degreasing D1 HOO NOZZ INTRODUTION
More informationH-U 1/8" to 3/4" male conn. (3.8 lpm and greater at 2.8 bar) U 1/8" to 1/4" female conn.
fat VeeJet s TANAR ANG E PRAY Overview: VeeJet H and U Fl spray nozzles are ideal for use in spray headers or manifolds. They produce a fan-type, tapered-edge spray ptern to ensure even coverage when multiple
More informationPulsaJet Automatic Spray Nozzles. Unmatched Precision for the Most Demanding Coating, Sealing and Marking Operations. Experts in Spray Technology
Experts in Technology Nozzles Control Analysis Fabrication PulsaJet Automatic Nozzles Unmatched Precision for the Most Demanding Coating, Sealing and Marking Operations Advanced Technology Delivers Superior
More informationWashJet Nozzles. flat spray
fat WashJet s HIGH IMPACT TANAR ANGE PRAY Overview: WashJet High-impact sprays and high pressure operation ensure optimal cleaning ideal for pressure washing ong wear life 0 series stainless steel material
More informationAUTOJET MODEL MODULAR SPRAY SYSTEM AUTOMATIC SPRAY CONTROL MADE SIMPLE
AUTOJET MODEL 1550+ MODULAR SPRAY SYSTEM AUTOMATIC SPRAY CONTROL MADE SIMPLE AUTOJET MODEL 1550+ MODULAR SPRAY SYSTEM OPTIMIZES THE PERFORMANCE OF YOUR AUTOMATIC SPRAY NOZZLES BENEFITS Automatic on/off
More informationSPRAY TECHNOLOGY FOR STEEL MILLS
CATAOG TABE OF CONTENTS SPRAY TECHNOOGY FOR STEE MIS spray.com CATAOG TABE OF CONTENTS THANK YOU FOR YOUR INTEREST IN OUR SPRAY PRODUCTS FOR STEE MIS. We look forward to helping you optimize your operations
More informationWILSON SPRAY NOZZLE. Manufacturer since INDUSTRIAL SPRAY NOZZLES for
Manufacturer since 1994 INDUSTRIAL S for Scrubbing, Rinsing, Descaling, Coating, Curing, Fogging, Etching, Mixing, Tank Cleaning, Quenching, Humidification, Spray Drying, Defoaming, Pulp Bleaching, Cold
More informationLiquid Strainers. Protect nozzles, valves and pumps from damaging debris. Experts in Spray Technology Spray Nozzles. Spray Fabrication.
Experts in Technology Nozzles Control Analysis Fabrication Liquid Strainers Protect nozzles, valves and pumps from damaging debris. Table of Contents T Strainers Low to Medium Pressure TW...3 TWC...3 TWF...4
More informationOPTIMIZING QUILL AND INJECTOR PERFORMANCE IN REFINERY OPERATIONS
Experts in Spray Technology WHITE PAPER: OPTIMIZING QUILL AND INJECTOR PERFORMANCE IN REFINERY OPERATIONS There are dozens of operations in refineries where quills and injectors are used. Before we discuss
More informationCHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING
AIR SPRAY NOZZLES CHEMICAL INJECTION PASSIVATING COATING STERILIZING FOGGING HUMIDIFYING MISTING COATING MOISTURIZING GAS COOLING LUBRICATING C1 AIR NOZZLES INTRODUCTION LARGEST SELECTION OF NOZZLES IN
More informationCJ Series Flat Spray Nozzles For Air & Saturated Steam CJ The following description will help to explain our Part Number/ Code in relation to the SPRAYTECH Spray Nozzle. EXAMPLE ORDERING. SPRAYTECH CJ
More informationHollow cone nozzles.
Absorption Chemical process engineering Cooling isinfection esuperheating ust control Fire protection Foam destruction Gas treatment umidification of air, goods, or textiles Oil spraying Protection of
More informationFlat fan nozzles. Nozzle characteristics
Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning
More informationA GUIDE TO SPRAY TECHNOLOGY FOR THE PULP & PAPER INDUSTRY
A GUIDE TO SPRAY TECHNOLOGY FOR THE PULP & PAPER INDUSTRY COMPREHENSIVE SPRAY TECHNOLOGY SOLUTIONS FROM A SINGLE SOURCE WE LOOK FORWARD TO HELPING YOU OPTIMIZE YOUR OPERATIONS INVOLVING SPRAY TECHNOLOGY.
More informationPounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
More informationSpray Products for the Car Wash Industry Reduce operating costs and improve customer satisfaction by maximizing spray performance
s Control Analysis Fabrication Products for the Car Wash Industry Reduce operating costs and improve customer satisfaction by maximizing spray performance ing Systems Co. high-performance spray products
More informationSpray Nozzles. Spray Control. Spray Fabrication. Spray Analysis. Pulp and Paper Industry Catalog
Nozzles Control Analysis Fabrication Pulp and Paper Industry Catalog Capabilities Overview Comprehensive Technology Solutions from a Single Source Ensures spray system optimization At the heart of all
More informationExperts in Spray Technology WINDJET AIR PRODUCTS CATALOG 20D
Experts in Spray Technology WINDJET AIR PRODUCTS CATALOG 20D Table of contents Blower Products page Detailed Table of Contents 3 Compressed Products Detailed Table of Contents 13 How to Optimize Drying
More informationSection H Spray Guns. Table of Contents
Section H Overview You re sure to find a solution for your cleaning and rinsing needs in our comprehensive line of hand-held spray guns. Options range from a gentle spray to a high-impact solid stream.
More informationF200 Series. Compressed Air and Gas Filters FEATURES. Heavy duty cast aluminum housings. Maximum working pressure 250 PSIG. Nine filtration grades
F200 Series Compressed Air and Gas s FEATURES Heavy duty cast aluminum housings Maximum working pressure 250 PSIG Nine filtration grades Push on filter elements BENEFITS OF THE F200 SERIES Rugged construction
More informationF200 Series. Compressed Air and Gas Filters. Heavy duty cast aluminum housings. Maximum working pressure 250 PSIG. Nine filtration grades
F200 Series Compressed Air and Gas s FEATURES Heavy duty cast aluminum housings Maximum working pressure 250 PSIG Nine filtration grades Push on filter elements BENEFITS OF THE F200 SERIES Rugged construction
More informationPounds Per Square Inch (PSI)
Nozzle Size Selection Chart Determine the nozzle size by the pressure washer s GPM @ PSI (gallons per minute @ a specific pounds per square inch). If the nozzle size is too small, your equipment can be
More informationACCUCOAT SPRAY SYSTEMS FOR PRECISE, UNIFORM APPLICATION OF OIL, BUTTER, SYRUP AND OTHER VISCOUS COATINGS
ACCUCOAT SPRAY SYSTEMS FOR PRECISE, UNIFORM APPLICATION OF OIL, BUTTER, SYRUP AND OTHER VISCOUS COATINGS TABLE OF CONTENTS page ACCUCOAT SPRAY SYSTEMS: Benchtop Systems For R&D 4 In-line Systems For Light
More informationSeries 774 Automatic Skid Package
Fluid Engineering 1432 Walnut St Erie, PA 16502 USA PH 814.453.5014 FAX 814.452.6573 www.fluideng.com sales @fluideng.com CONTINUOUS FLOW The Fluid Engineering 774 Strainer Package is designed to handle
More informationSpray Nozzle. QuickJet and Systems/Components. Features and Benefits. Accessories
Efficient QuickJet and Systems are designed to save time in the cleaning and replacement of plugged or worn spray tips. Key feature overview for QuickJet Systems: Reduce maintenance downtime and costs
More informationTwist & Dry. Twist & Dry Component System SPECIAL PURPOSE. Same day shipping for wear parts! Tungsten Carbide Options
Twist & Dry TO DER: specify pipe size, connection type, 108 Twist & Dry Component System The Twist & Dry series of nozzles was designed and developed for the spray drying industry, with the dryer operator
More informationQuick-disconnect spray nozzles
ZIP-TIP Quick-disconnect spray nozzles + = ZIP-TIP BODY STNDRD O-RINGS ZIP-TIP TIP COMPETE UNIT BEX ZIP-TIP quick-disconnect spray nozzles are designed to allow fast and easy installation and removal of
More informationGW THERMOCOOL NOZZLE STRUCTURAL STEEL PROTECTION
DESCRIPTION The GW Thermocool nozzle is a reverse action open nozzle. It is designed for fire protection of structural steel, and the specially developed water distribution pattern provides protection
More informationANRO ANRO SPRAY SOLUTIONS NOZZLES FOR SPRAY DRYING
ANRO ANRO SPRAY SOLUTIONS NOZZLES FOR SPRAY DRYING BX Series Spray dry nozzles Spray drying is one of the most complex spraying applications in industry today. The reason for this complexity is due to
More informationUNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE -
UNI-SPRAY - CLAMP-ON NOZZLE SELECTION GUIDE - Uni-Spray Nozzles... are injection molded from custom blended polypropylene, a cost effective material that is corrosion and heat resistant and is impervious
More informationOptimize Performance and Simplify Installation
ccessories F1 c c e s s o r i e s Introduction Optimize Performance and Simplify Installation Simplify Nozzle Mounting and Positioning Split-eyelet connectors djustable ball fittings djustable hoses and
More informationSPRAY CHARACTERISTICS Mist at low pressure; fog at high pressure Spray pattern: Cone-shaped Fog Flow rates: to l/min
MicroWhirl Fine tomization Outstanding atomization Rugged pinless design Drip-free performance 70 micron polypropylene filter Safety wire hole available Patented design Minimum operating pressure 7 Mist
More informationSHOWER NOZZLES TABLE OF CONTENTS. ShowerJet One-piece, High-pressure. ShowerJet Disc-type. Lock Rings. NeedleJet Nozzles.
TABLE OF CONTENTS ShowerJet One-piece, High-pressure ShowerJet Disc-type Lock Rings NeedleJet Nozzles DiscJet Nozzles Self-Cleaning Nozzles page C3 C4 C5 C6 C8 C9 C1 QUICK REFERENCE GUIDE QUICK REFERENCE
More informationB E X S P RAY NOZZLES K ATA L O G N O. 60
B E X S P RAY NOZZLES K ATA L O G N O. 60 With over 50 years of design and manufacturing experience, BEX is a leader in spray nozzle and tank mixing eductor technology. Our sales specialists, engineers,
More informationTECHNICAL REFERENCE CLEANING POWER GUIDELINES TANKJET TANK CLEANER OVERVIEW BY TANK DIAMETER OPTIMIZING TANK CLEANING OPERATIONS
OPTIMIZING TANK CLEANING OPERATIONS CLEANING POWER GUIDELINES Choosing a tank cleaner is based primarily on tank size and level of cleaning required. Understanding the definitions that follow will help
More informationFull cone nozzles. Axial-flow full cone nozzles
Absorption Chemical process engineering Chlorine precipitation Cleaning Cooling esuperheating ust control Fire protection Foam control Gas treatment ing onto mats in air washers ing over packings Surface
More informationNEW! BOOSTER PUMPS. HBP/HBPS series 4" horizontal booster pumps. booster pumps
HBP/HBPS series 4" horizontal The HBP/HBPS Series Booster Pumps are the most durable available. The patented SignaSeal floating impeller design minimizes thrust loads, allowing for continuous operation
More informationRight Angle Nozzle Assembly
Swirl- Air atomizing nozzle Features: Large internal passages with no vanes or cores assure unrestricted flow... Little chance for clogging No external struts or supports to interfere with spray pattern
More informationExtremely uniform liquid distribution Wide flow rate range Large number of available spray angles
Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface
More informationSPEAKMAN SE Optimus Pedestal Mounted Eye And Face Wash System FEATURES: COMPLIANCE: OPTIONS: ADD SUFFIX TO MODEL # WARRANTY: SPECIFICATION
Optimus Pedestal Mounted Eye And Face Wash System SE-00 4 5 379mm±5 49mm±5 5 4 mm±6 ± 305mm± FEATURES: Independent eye wash & face wash integrated into one, multi-functioning safety unit Aerated sprays
More informationTUNGSTEN CARBIDE TIPS FOR HIGH-PRESSURE SPRAYING
TUNGSTEN CRIDE TIPS FOR HIGH-PRESSURE SPRYING TUNGSTEN CRIDE TIPS SVE DHESIVES, COTINGS, PINT, CHEMICLS & ELECTRICITY In high-pressure spraying applications, the high velocity of the liquid through the
More informationA Guide to Improving the Performance of Your Drying and Blow-off Applications with WindJet Air Products. Experts in Spray Technology Spray Nozzles
Experts in Spray Technology Spray Nozzles Spray Control Spray Analysis Spray Fabrication A Guide to Improving the Performance of Your Drying and Blow-off Applications with WindJet Air Products Usage Tips
More informationMODEL: HV-AS & HV-BS TECHNICAL DATA : MAINTENANCE DESCRIPTION PRESSURE (3/4 NPT OPTIONAL)
High Velocity Water Spray Nozzle MODEL: HV-AS & HV-BS TECHNICAL DATA : MAXIMUM WORKING PRESSURE EFFECTIVE WORKING PRESSURE 12 Bar (175 PSI) 3.5 Bar to 10.5 Bar (50-150 PSI) END CONNECTION MATERIAL 3/4
More informationGeneral Engineering Spray Nozzles & Accessories
General Engineering Spray Nozzles & Accessories 3 GENERAL SPRAY NOZZLES & ACCESSORIES Clip On Spray Nozzles SWIVELING ANGLE ADJUSTMENT SPRAY CHARACTERISTICS : These nozzles simply clip over a pre-drilled
More information800S Series. Based on proven technology. When creating the 800S Series. sprinkler, we started with. technology that works. Then
800S Series G O L F S P R I N K L E R S Based on proven technology. When creating the 800S Series sprinkler, we started with technology that works. Then we enhanced it. This blend of old and new defines
More informationBEX SPRAY NOZZLES CATALOG NO. 60
BEX SPRAY NOZZLES CATALOG NO. 60 WELCOME TO BEX SPRAY NOZZLES With over 50 years of design and manufacturing experience, BEX is a leader in spray nozzle and tank mixing eductor technology. Our sales specialists,
More informationMEDIUM VELOCITY WATER SPRAY NOZZLE
MEDIUM VELOCITY WATER SPRAY NOZZLE HD FIRE PROTECT TECHNICAL DATA MODEL MV-A & MV-AS Brass Material MV-B & MV-BS Stainless Steel Material MV-E is with Aluminium Bronze Material TYPE MV-A, MV-B & MV-E are
More informationAbsorption Chemical process engineering Chlorine precipitation Cleaning Cooling Desuperheating Dust control Fire protection Foam control Gas
Absorption Chemica process engineering Chorine precipitation Ceaning Cooing esuperheating ust contro Fire protection Foam contro as treatment Spraying onto mats in air washers Spraying over packings Surface
More informationSeries 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating VENT 'A' FLOW
Series 105 Simplex Strainer Cast Iron Swing Bolt O-Ring Closure, Flanged Connection Class 125 ANSI Flat Face Flange Rating 1/4" NPT VENT 'A' 1/4" NPT 2 - REQ'D 'D' REQ D FOR BASKET REMOVAL 'B' FLOW 'C'
More informationSPRAY NOZZLES. A GLOBAL PRODUCT GUIDE to the most frequently specified nozzles for general industrial applications
Delavan Distributor Deutschland: VIPTech GmbH Web www.duesen.de Mail anfrage@duesen.de Tel: + 49 07022 948 735 Fax + 49 07022 948 636 SPRAY NOZZLES A GLOBAL PRODUCT GUIDE to the most frequently specified
More informationOwner's Manual. (60 Gallon 3 Point Sprayer w/pump, Coupler, & 7-Nozzle Boom Assembly) Assembly. Information About The Sprayer
Owner's Manual (0 Gallon Point Sprayer w/pump, Coupler, & -Nozzle Boom Assembly) Assembly Most of the sprayer has been assembled at the factory. Join the center boom member to the carrier frame with the
More informationK-BALL SERIES SPRAY NOZZLES
K-BALL SERIES NOZZLES K-Ball Clip-on spray nozzles CHARACTERISTICS: These nozzles simply clip over a pre-drilled pipe (9/16 dia. hole) and are available with a variety of spray balls, in various spray
More informationNOZZLE TYPES AND CHARACTERISTICS
95 NOZZLE TYPES AND CHARACTERISTICS Dennis w. Bintner Design Engineer Delavan Hanufacturing Company West Des Moines, Iowa The many varieties of herbicides on the market today, make the proper selection
More informationOPTIMIZE PERFORMANCE AND SIMPLIFY INSTALLATION
ACCESSORIES G1 A C C E S S O R I E S INTRODUCTION OPTIMIZE PERFORMANCE AND SIMPIFY INSTAATION Clog Prevention iquid strainers Filtration assemblies Air line filters Ensure Proper Flow Control and Regulation
More informationOPTIMIZE PERFORMANCE AND SIMPLIFY INSTALLATION
ACCESSORIES G1 A C C E S S O R I E S INTRODUCTION OPTIMIZE PERFORMANCE AND SIMPIFY INSTAATION Clog Prevention iquid strainers Filtration assemblies Air line filters Ensure Proper Flow Control and Regulation
More informationXP-300 Series Sprinklers Installation & Service Instructions
XP-300 Series Sprinklers Installation & Service Instructions Introduction The XP-300 Series Sprinkler is a multiple-stream gear-driven sprinkler ideal for residential and commercial applications. Sprinkler
More informationNessie Water Mist Nozzles
Data Sheet Nessie Water Mist Nozzles Applications The nozzles are tailored to atomize water in high pressure water mist systems. The nozzles are very suitable for applications within e.g.: Humidification
More informationBOOMLESS NOZZLES FIELDJET TFW TURBO FLOODJET BOOMLESS NOZZLES WITH EXTRA-WIDE FLAT SPRAY PROJECTION
BOOMLESS NOZZLES FIELDJET BOOMLESS NOZZLES WITH EXTRAWIDE FLAT SPRAY PROJECTION The KLC Fieldjet nozzle is typically used to spray areas not accessible with a boom sprayer. Its onepiece design projects
More informationTECHNICAL DATA SHEET. Medium Velocity Water Spray Nozzle. Page 1. Description. Technical and Environmental Specification. Installation & Maintenance
Description The LIFECO s are open type (non-automatic nozzles, designed for directional spray application in fixed fire protection system. Medium velocity water spray nozzle has an external deflector,
More information5000 Series Rotors 5000, Plus, PRS, SAM
Tech Spec 5000 Series Rotors 5000, Plus, PRS, SAM Built from top to bottom with the contractor in mind, the Rain Bird 5000 Series product line is the durable, reliable rotor for residential and commercial
More information8296 Portable Monitor Operating & Maintenance Instructions
8296 Portable Monitor Operating & Maintenance Instructions PHYSICAL: 1302 WEST BEARDSLEY AVE ELKHART, IN 46514 WWW.ELKHARTBRASS.COM MAILING: P.O. BOX 1127 ELKHART, IN 46515 1-574-295-8330 1-800-346-0250
More informationOIL BURNER NOZZLES
INDEX Accessories... 14-6 14-8, 14-10 DELAVAN Available Nozzle Sizes... 14-5... 14-2 Hago OIL BURNER Nozzles B Solid Cone Black Caps... 14-3 DFN Dual Filtration White Caps... 14-4 EH Extra Hollow Cone
More informationAir Atomising Products Swirl-Air Nozzles. Product Guide
Atomising Products Swirl- Nozzles Product Guide Swirl- Product Introduction Swirl- Nozzles 2 INTRODUCTION SWIRL-AIR PRODUCT BROCHURE www.delavan.com Delavan Spray Technologies Continually meeting the challenges
More informationS19214 Series. Pedestal-Mount Halo Eyewash or Eye/Face Wash. Recommended Option:
Halo Delivers the Most Effective Eye/Face Washdown Coverage and Spray Pattern Exceeds American National Standard Z358.1 Specifications Exceeds European EN 15154-1 & EN 15154-2 Exceeds Australia/New Zealand
More informationLG-60-3PT-WP-309-BL-TSC
55 Model No: LG-0-PT-WP-0-BL-TSC 0 Gallon Point Lawn & Garden Sprayer W/Pump & Coupler & Boomless Boom Assembly / Operation Instructions / Parts ASSEMBLY Most of the sprayer has been assembled at the factory..
More informationTEEJET VARI-SPACING NOZZLES
PRO SERIES TEEJET VARI-SPACING NOZZLES For use with all interchangeable Spray Tips For operating pressures up to 125 p.s.i. TeeJet Vari-Spacing Nozzles permit the construction of spray booms with adjustable
More informationINDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS. 143
8 INDUSTRIAL SPRAY NOZZLE GUN FOR GENERAL APPLICATIONS LIQUIDS www.charlandthermojet.com 143 T-70 SERIES INDUSTRIAL AUTOMATIC SPRAY NOZZLE GUN Ideal for many cleaning tasks in every kind of industrial
More informationAUTOMATIC SPRAY NOZZLES COATING DISPENSING GLAZING LAMINATING ROBOTIC APPLICATIONS MARKING FLAVORING HUMIDIFYING LUBRICATING MOISTURIZING
AUTOMATIC SPRAY NOZZLES COATING DISPENSING GLAZING LAMINATING ROBOTIC APPLICATIONS MARKING FLAVORING HUMIDIFYING LUBRICATING MOISTURIZING B1 AUTOMATIC NOZZLES INTRODUCTION INTRODUCTION If your application
More informationA I R ATO M I ZI N G & A UT O MAT IC S P RAY N O Z Z L E S
SPRAYING SYSTEM S CO. C ATA L O G 7 5 - M A I R ATO M I ZI N G & A UT O MAT IC S P RAY N O Z Z L E S North Avenue and Schmale Road, P.O. Box 7900, Wheaton, IL 60187-7901 USA AIR ATOMIZING & A U T O M AT
More informationOWNER S MANUAL. Model: TR-40-GAS ( ) (40 Gallon Lawn & Garden Trailer Sprayer w/5-nozzle Boom Assembly) Technical Specifications
OWNER S MANUAL Model: TR-40-GAS (5301339) (40 Gallon Lawn & Garden Trailer Sprayer w/5-nozzle Boom Assembly) Technical Specifications 40 Gal. Corrosion-Resistant Polyethylene Tank 5.5 HP Briggs & Stratton
More information590G Series Golf Spray Head. 590G Series Golf Spray Head. Variable Arc 4, 6, 12 Pop-up X-Flow and Check-O-Matic Standard.
590G Series Golf Spray Head 590G Series Golf Spray Head Variable Arc 4, 6, 12 Pop-up X-Flow and Check-O-Matic Standard Specifications Radius: 2' 18' (,6 5,5m) Maximum operating pressure: 75 psi (5,2 Bar)
More informationPalm-Style Mini-Orbital Offset Mini-Orbital...55 Angle-Head Mini-Dynorbital...56 Right Angle Mini-Orbital...57 Electric Dynorbital...
Dynorbital-Spirit...46 HiVac Dynorbital-Spirit...48 Mesh Abrasive Systems...49 Dynorbital Supreme...50 Two-Hand Dynorbital...52 11" Dia. Dynorbital...53 Palm-Style Mini-Orbital...54 7 Offset Mini-Orbital...55
More informationElements of plumbing
Elements of plumbing 00 Introduction PLANNING THE PLUMBING OF YOUR FOUNTAINS When building a fountain a lot of hydraulic parts and component will be needed to provide trouble-free operation of the desired
More informationModel: ATVTS-60-12V 60 Gallon Trailer Sprayer W/7 Nozzle Boom ASSEMBLY / OPERATION INSTRUCTIONS / PARTS
5301192 Model: ATVTS-60-12V 60 Gallon Trailer Sprayer W/7 Nozzle Boom ASSEMBLY / OPERATION INSTRUCTIONS / PARTS ASSEMBLY INSTRUCTIONS The sprayer is assembled except for the pressure gauge, axle, wheels
More informationPUMPS Construction Sites Mining Barges and Ships Utilities Industrial Applications Municipalities Sewage Systems
Porta-Matic 12V battery-powered portable pump AP5 Air-driven high-pressure pump SludgeMaster Air-driven high-flow pump DEWATERING PUMPS Construction Sites Mining Barges and Ships Utilities Industrial Applications
More informationLeaders in precision application components, control system technology, and application data management.
Catalog 51-M Leaders in precision application components, control system technology, and application data management. www.teejet.com Table of Contents Selection Guide TeeJet Broadcast Nozzle Selection
More informationSlide In Vacuum Tank Price List 48 Standard Models
Slide In Vacuum Tank Price List 48 Standard Models 300, 450, 600, 800, 995, 1200 & 1500 Gallon Capacities Rear Engine Side Engine Side Engine Transverse January 2018 SC Model Slide In Vacuum Tank Standard
More information5022 SD - 1/2" Impact Sprinkler
Impact Sprinklers 5022 SD - 1/2" Impact Sprinkler Full Circle Impact- 25 trajectory 1/2" Male N.P.T. Single and Dual Bayonet s Plastic Bearing Plastic head and lever for strength, durability, and consistent
More informationOWNER S MANUAL. Model: SK-61-4R ( ) (60 Gallon Skid Sprayer w/5.5 HP Engine, 4-Roller Pump & Deluxe Handgun) Assembly Instructions
OWNER S MANUAL Model: SK-61-4R (5301336) (60 Gallon Skid Sprayer w/5.5 HP Engine, 4-Roller Pump & Deluxe Handgun) Technical Specifications 5.5 HP Engine 4 Roller Pump 6 G.P.M. Pressure Relief Valve Deluxe
More informationOwner's Manual. Model: UTL-60-12V ( ) (60 Gallon Utility Sprayer w/ 5-Nozzle Boom Assembly) Technical Specifications.
Owner's Manual Model: UTL-0-V (0) (0 Gallon Utility Sprayer w/ -zzle Boom Assembly) Technical Specifications 0 Gallon Corrosion-Resistant Polyethylene Tank Deluxe Pistol-Grip Handgun w/ Ft. Hand Gun Hose
More informationAutoJet. Highly efficient method of applying lubricants and corrosion protection fluids
AutoJet Lubrication Systems Highly efficient method of applying lubricants and corrosion protection fluids Functional Differences Nozzles for Type P400: Type L210 For low-viscosity media Type P400 For
More informationMODEL: ATVBK-710 BEFORE RETURNING THIS PRODUCT FOR ANY REASON, PLEASE CALL
5307 MODEL: ATVBK-70 7 Nozzle boom assembly W/CONNECTING FITTINGS Assembly / Operation Instructions / Parts original sales slip, or other evidence of purchase date, to your distributor / dealer. TECHNICAL
More informationModel No. LG55-3PT 55 Gallon Sprayer 3 Point Lawn & Garden Sprayer Model No. LG27-3PT 25 Gallon Sprayer GENERAL INFORMATION
5300587 Model No. LG27-3PT 25 Gallon Sprayer 5300576 Model No. LG55-3PT 55 Gallon Sprayer 3 Point Lawn & Garden Sprayer Join the center boom to the carrier frame with the two u-bolts, and flange locknuts.
More informationSpray Guns. Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency
Spray Guns P E R F O R M A N C E S E R I E S AUTOMATIC MANUAL TOUCH-UP Trans-Tech, HVLP & Conventional Advanced Technologies for the optimal mix of performance, ergonomics & efficiency www.devilbiss.com
More informationMGP/MGPS Series SPECIFICATIONS
The MGP/MGPS Booster Pumps are the most durable booster pump available. The proven SignaSeal floating impeller design minimizes thrust loads allowing for continuous operation without damage to motor bearings,
More informationHOSES. nozzle BRASS QUICK SEWER NOZZLE TAPE WASHER HIGH PRESSURE HOSE TOOLS TURBO HIGHER PSI RATING. o rings WASH SOAP CHISELING FLUSHING BLASTING
PRESSURE WASHER CENTER CATALOG BRASS QUICK coupling HIGH PRESSURE HOSE o rings TAPE HOSES HIGHER PSI RATING WASHER TURBO nozzle TOOLS for the trade SEWER NOZZLE WASH SOAP CHISELING FLUSHING BLASTING brass
More informationSprayer Equipment. Aerial Pesticide Applications. Ground-based Pesticide Applications. Airblast Sprayers. Hand Operated Sprayers.
Revised: March 12 Aerial Pesticide Applications Many pesticides may be applied by either fixed-wing aircraft or by helicopters. The main advantage of aerial spraying is that it can be carried out quickly
More informationCar Wash / Pressure Washer
Car Wash / Pressure Washer PARTS & ACCESSORIES Proudly distributed by: We have many representatives in all 50 states. Give us a call to locate the one nearest you! Custom manufacturing available... ask
More informationInstallation Instructions for Bike Fixtation. Bottle Fill and Bike Wash Stations Manual Rev. B
15540 Woodinville Redmond Rd NE, Suite A-200, 2647 37th Woodinville, Ave. S Unit WA 1, Minneapolis 98072 MN 55406 Phone: 425.483.7000 Phone: 612-568-3498 Email: salesandsupport@sportworks.com E-mail: info@bikefixtation.com
More informationPRESSURISED SANDBLASTER
PRESSURISED SANDBLASTER MODEL NO: CPSB200 PART NO: 7640128 OPERATION & MAINTENANCE INSTRUCTIONS LS1211 INTRODUCTION Thank you for purchasing this Clarke Pressurised Sandblaster. Before you try to use this
More information