F o a m C o n t r o l C l e a n i n g

Transcription

1 Full Cone s Absorption Fire Protection Chemical Injection Rinsing F o a m C o n t r o l C l e a n i n g Gas Treatment esuperheating Mist Elimination Cooling ust Control B

2 Full Cone s Introduction CHOOE FROM THE INUTRY' ARGET EECTION tyles: Conventional Quick-connect Maximum free passage Connections: /8" to 2" pipe sizes Female and male NPT and BPT Flange pray patterns: tandard quare ide angle ide angle square Narrow angle Oval pray angles: 5 to 70 Flow rate range:.05 to 8728 gpm (.9 to 250 lpm) Materials: Brass Mild steel 0 stainless steel stainless steel Polyvinyl chloride Hardened stainless steel Kynar Polypropylene ProMax PTFE Other specialty materials available Operating pressure range: up to 400 psi (25 ) ee Trademark Registration and Ownership, page i-. Optimize the performance of FullJet nozzles: Prevent debris from damaging and clogging nozzles, valves and pumps by using strainers. T-style strainers are available in a wide range of sizes, materials and pressure ratings. ee page F4 Precisely position spray nozzles to ensure proper coverage of target and minimize overspray with adjustable ball fittings. eak-proof, clog-resistant fittings are available in several sizes and styles. ee page F2 Use split-eyelet connectors to simplify and facilitate installation of nozzles, gauges, hoses and other fittings. Economical connectors eliminate cutting, threading and brazing. ee page F2 B2

3 Full Cone s Table of Contents FUJET G AN H NOZZE: TANAR, IE AN NARRO ANGE PRAY p a g e PIRAJET NOZZE: TANAR ANGE PRAY AN EXTRA ARGE FREE PAAGE EIGN G and GG nozzles G and GG wall-mount nozzles GA and GGA angle-type nozzles B4 B4 B4 HHJ and HHJX nozzles Quick Reference Guide p a g e B24 B25 G-5 and GG-5 nozzles B4 G-0 and GG-0 nozzles B4 H, HH and -HH nozzles B5 HF nozzles B5 H wall-mount nozzles B5 H-5 and HH-0 nozzles B5 ITRIBOJET NOZZE: EXTRA ARGE FREE PAAGE EIGN p a g e R, RR and RF nozzles B27 Quick Reference Guide B28 Quick Reference Guide B QUICK FUJET AN PROMAX QUICK FUJET NOZZE: TANAR, IE AN NARRO ANGE PRAY QJA, QJA, QJJA and QJJA Quick FullJet bodies QGA, QGA, QHA and QHA Quick FullJet spray tips QPPA ProMax Quick FullJet body QPHA ProMax Quick FullJet spray tips Quick Reference Guide p a g e B4 B4 B5 B5 B FUJET NOZZE: QUARE AN OVA PRAY PATTERN AN VANEE EIGN G-Q and GG-Q nozzles H-Q, HH-Q, H-Q and HH-Q nozzles G-V and GG-V nozzles GANV and GGANV nozzles Quick Reference Guide p a g e B0 B0 B B B2 FUJET MAXIMUM FREE PAAGE (MFP) NOZZE: TANAR ANGE PRAY HMFP and HHMFP nozzles Quick Reference Guide p a g e B20 B2 UNIJET NOZZE: TANAR AN IE ANGE PRAY AN QUARE PRAY PATTERN T and TT UniJet bodies p a g e B, TG, TG-, TH- and TG-Q UniJet spray tips B Quick Reference Guide B7 B

4 fu FullJet G and H s TANAR ANGE PRAY IE ANGE PRAY N NARRO ANGE PRAY Overview: FullJet G and H olid cone-shaped spray pattern with round impact area Unique vane design minimizes turbulence of the fluid to ensure uniform spray distribution and consistent spray coverage arge unobstructed flow passages minimize clogging and increase throughput Removable caps and vanes in most models make maintenance fast and easy tandard, wide and narrow spray angles FullJet G and H s The liquid enters the nozzle and proceeds through the vane. The vane causes the liquid to swirl. The design of the nozzle ensures the liquid continues to swirl as it enters the orifice. The liquid breaks up as it exits the nozzle orifice forming a well defined cone pattern. The drops are uniform in size and distributed equally throughout the spray pattern. FullJet G s pray angles: tandard 4 to 94, Narrow 5 or 0, ide 2 to 20 Uniform spray distribution from.07 to 25 gpm (.29 to 92 lpm) Operating pressures up to 00 psi (20 ) all-mount versions for installation on room exterior, vessel or pipeline Right-angle mount versions for 90 angle mounting in areas with limited space FullJet G Options G /8" to /2" female conn. Removable cap and vane GG /8" to /2" male conn. Removable cap and vane G /8" to /2" female conn. all-mount Removable cap and vane GG /8" to /2" male conn. all-mount Removable cap and vane GA /8" to /2" female conn. Angle-type Removable cap and vane GGA /8" to /2" male conn. Angle-type Removable cap and vane N N N N G-5 /8" to /2" female conn. Removable cap and vane GG-5 /8" to /2" male conn. Removable cap and vane G-0 /8" to /4" female conn. Removable cap and vane GG-0 /8" to /4" male conn. Removable cap and vane B4 spray.com..5000

5 FullJet G and H s TANAR ANGE PRAY IE ANGE PRAY N NARRO ANGE PRAY fu FullJet H s pray angles: tandard 4 to 94, Narrow 5 or 0, ide 02 to 25 Uniform spray distribution from.07 to 524 gpm (.29 to 9842 lpm) Operating pressures up to 00 psi (20 ) all-mount versions for installation on room exterior, vessel or pipeline Certain nozzles available with U listing FullJet H Options H /4" to " female conn. One-piece body H -/4" to 8" female conn. Removable vane/cast body H -/2" to 2" female conn. Removable vane/ polypropylene* HH /8" to " male conn. One-piece body -HH /2" to /4" male conn. One-piece body/plastic** *Max. temperature for polypropylene: 50 F ( C). ** Max. temperature for Kynar : 22 F (00 C). HF 4" to 0" flange conn. Removable vane/cast body N N N H /4" to " female conn. all-mount One-piece body H-5 /4" to " female conn. One-piece body Removable vane H-5 4" to 5" female conn. Two-piece cast body Removable vane HH-0 " to 2-/2" male conn. One-piece body Removable vane Ordering Information FullJet G, G, GA, G-5, G-0, H, HF, H, H-5 and HH-0 Material Code ize Example /4 G 0 FullJet -HH BPT connections require the addition of a B prior to the inlet connection. Prefix Material Code Example pray Angle ize /2 HH PP BPT connections require the addition of a B prior to the inlet connection. REATIVE ROP IZE IN MICRON 0 to to 500 rop size will vary based on flow rate and pressure. 500 to to 5000 spray.com B5

6 fu FullJet G and H s TANAR ANGE PRAY IE ANGE PRAY N NARRO ANGE PRAY Quick Reference Guide Model Connection/ Connection ize Materials Performance ata Page Number imensions and eights G F /8 to /2 Brass, Mild steel (I), 0 stainless steel (), GG M /8 to /2 stainless steel (), Polyvinyl chloride (PVC) G F, all-mount /8 to /2 GG M, all-mount /8 to /2 GA F, Angle-type /8 to /2 GGA M, Angle-type /8 to /2 Brass, Mild steel (I), 0 stainless steel () G- F /8 to /2 Brass, Mild steel (I), 0 stainless steel (), GG- M /8 to /2 stainless steel (), Polyvinyl chloride (PVC) GA- F, Angle-type /8 to /2 Brass, Mild steel (I), 0 stainless steel (), GGA- M, Angle-type /8 to /2 stainless steel () G-5 F /8 to /2 GG-5 M /8 to /2 Brass, 0 stainless steel () G-0 F /8 to /4 Brass, 0 stainless steel (), GG-0 M /8 to /4 stainless steel/0 caps () B7 B0 B B2 H F /4 to Brass, Mild steel (l), 0 stainless steel (), stainless steel (), Polyvinyl chloride (PVC) B7 H F, Cast -/4 to 8 Brass, stainless steel () B7B9 H F -/2 to 2 Polypropylene (PP) B8 HH M /8 to Brass, Mild steel (l), 0 stainless steel (), stainless steel (), Polyvinyl chloride (PVC) B7 -HH M /2 to /4 Kynar, Polypropylene (PP) B9 HF Flange, Cast 4 to 0 Brass, stainless steel () B8, B9 H F, all-mount /4 to Brass, Mild steel (I), 0 stainless steel () B7, B8 H- F /4 to Brass, Mild steel (l), 0 stainless steel (), stainless steel () B H- F, Cast -/4 to 4 Brass, stainless steel () H- F -/2 to 2 Polypropylene (PP) B0 HH- M /8 to -/2 Brass, Mild steel (I), 0 stainless steel (), stainless steel (), Polyvinyl chloride (PVC) H-5 F /4 to Brass, 0 stainless steel () H-5 F, Cast 4 to 5 Brass, stainless steel/0 caps () HH-0 M to 2-/2 Brass, 0 stainless steel (), stainless steel/0 caps () B F = female thread; M = male thread. There is no material code for brass. eave material code blank when ordering. Other materials available upon request. For more dimensions and sizes, contact your sales engineer. B spray.com..5000

7 FullJet G and H s TANAR ANGE PRAY fu Performance ata: tandard Angle pray tandard all-mount Angle G GG H HH HF G H GG GA GGA ize Orifice ia. Nom. Max. Free Passage ia. 0.4 Flow Rate (liters per minute) pray Angle ( ) / / / / / / Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. spray.com B7

8 fu FullJet G and H s TANAR ANGE PRAY Performance ata: tandard Angle pray -/2 tandard all-mount Angle G GG H HH HF G H GG GA GGA ize Orifice ia. Nom. Max. Free Passage ia. 0.4 Flow Rate (liters per minute) pray Angle ( ) * * * / Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. *These capacity sizes are not available for H in polypropylene. B8 spray.com..5000

9 FullJet G and H s TANAR ANGE PRAY fu Performance ata: tandard Angle pray tandard all-mount Angle G GG H HH HF G H GG GA GGA ize Orifice ia. Nom. Max. Free Passage ia. 0.4 Flow Rate (liters per minute) pray Angle ( ) Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. Performance ata: tandard Angle pray -HH pray Angle ize Max. Free Passage ia. 0.4 Flow Rate (liters per minute) / / Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. spray.com B9

10 fu FullJet G and H s IE ANGE PRAY Performance ata: ide Angle pray tandard Angle G- GG- HH- H- GA- GGA- ize Orifice ia. Nom. Max. Free Passage ia. 0.4 Flow Rate (liters per minute) pray Angle ( ) / / / / / / / / Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. B0 spray.com..5000

11 FullJet G and H s N NARRO ANGE PRAY fu N Performance ata: Narrow Angle pray N /8 G-5 G-0 GG-5 GG-0 H-5 HH-0 ize Orifice ia. Nom. Flow Rate (liters per minute) pray Angle ( ) / / / / / / / / / / / / /4 -/ / spray.com B

12 FU FUJET G AN H NOZZE TANAR ANGE PRAY IE ANGE PRAY N NARRO ANGE PRAY IMENION AN EIGHT Hex. Net eight (kg) Hex. Net eight (kg) / / 0.0 /8. 9/ 0.0 G (F) G- (F) /4 7. / 0.04 /8 4.0 / 0.07 G-5 (F) /4 4. / 0.0 /8 47. / 0.09 / / / / 0.02 / / 0.0 GG (M) GG- (M) /4 9.7 / 0.04 /8 4.8 / 0.07 GG-5 (M) /4 4.7 / 0.04 / / 0.09 / / /8 5. 9/ 0.0 /8 5. / 0.0 G (F) / / 0.04 / G-0 (F) / / 0.09 / / / /4 0.2 /8.9 9/ 0.0 / /2 0.4 GG (M) /4 4. / 0.04 /8 4.8 / 0.07 / /2 0.0 / / 0.09 / GG-0 (M) /8 55. / 0. Based on the largest/heaviest version of each type. / /4 0.2 / /2 7 Based on the largest/heaviest version of each type. A B C Net eight (kg) A / B C GA (F) GA- (F) / / / A / B C GGA (M) GGA- (M) / / / Based on the largest/heaviest version of each type. B2 spray.com..5000

13 FUJET G AN H NOZZE TANAR ANG E P R AY I E A N G E P R AY N N A R R O A N G E P RAY FU IMENION AN EIGHT (ia.) Net eight (kg) / / oct. -/ oct oct..7 2-/ oct oct oct oct oct oct /2 04. H (F) H- (F) HH (M) HH- (M) H (F) H- (F) Cast H (F) Cast (tandard angle only) ide angle not available in Cast for these sizes HH- (M) (ide angle only) tandard angle not available for these sizes (ia.) Net eight (kg) / / / / / / / / / / / / / / / / / / H (F) H (F) Polypropylene c /2 9. H-5 (F) 0.0 -HH (M) Polypropylene 4.2 /4 5. -/ H- (F) c H-5 (F) Cast Polypropylene HF (Flange) HH-0 (M) c Based on the largest/heaviest version of each type Based on the largest/heaviest version of each type. spray.com B

14 fu Quick FullJet and ProMax Quick FullJet s TANAR ANGE PRAY IE ANGE PRAY N NARRO ANGE PRAY Overview: Quick FullJet and ProMax Quick FullJet Reduce maintenance time bodies remain on pipe/header; quick quarter-turn removes/installs spray tips with automatic alignment ave on nozzle replacement costs bodies can be reused, only spray tips are replaced pray angles: tandard 4 to 9, Narrow 5 or 0, ide 02 to 20 Uniform spray distribution from.0 to 9.4 gpm (.8 to 72 lpm) Operating pressures up to 00 psi (20 ) Choice of metal or ProMax materials. ProMax features: ProMax material, a special grade of polypropylene, resists build-up and chemical attack; for use up to 50 psi (0 ) Internal O-ring provides a positive seal between the body and tip; seal remains attached to tip eliminating accidental loss Optional external O-ring protects nozzle from contaminants Tips are color-coded for easy flow rate identification Quick FullJet and ProMax Quick FullJet s The liquid enters the nozzle and proceeds through the vane. The vane causes the liquid to swirl. The design of the nozzle ensures the liquid continues to swirl as it enters the orifice. The liquid breaks up as it exits the nozzle orifice forming a well-defined cone pattern. The drops are uniform in size and distributed equally throughout the spray pattern. Quick FullJet Options QJA Body /8" to /2" female conn. QJJA Body /8" to /2" male conn. QJJA Body /8" to /2" male conn. QGA pray Tip + QJA Body /8" to /2" female conn. Removable cap and vane QGA pray Tip Removable cap and vane/ arge conn. Use with QJA and QJJA bodies QHA pray Tip Non-removable vane Use with QJA and QJJA bodies QHA pray Tip Non-removable vane/ arge conn. Use with QJA and QJJA bodies N N N N QGA-5 pray Tip Removable cap and vane Use with QJA and QJJA bodies QGA-5 pray Tip Removable cap and vane/ arge conn. Use with QJA and QJJA bodies QGA-0 pray Tip Removable cap and vane Use with QJA and QJJA bodies QGA-0 pray Tip Removable cap and vane/ arge conn. Use with QJA and QJJA bodies B4 spray.com..5000

15 QUICK FUJET AN PROMAX QUICK FUJET NOZZE TANAR ANGE PRAY IE ANGE PRAY FU PROMAX QUICK FUJET OPTION QPHA pray Tip Brown QPHA-. gpm (.8 lpm) Use with QPPA body QPHA pray Tip hite QPHA-.5 gpm (.57 lpm) QPHA gpm (. lpm) Use with QPPA body QPHA pray Tip Gray QPHA-2.2 gpm (.7 lpm) Use with QPPA body QPHA pray Tip + QPPA Body /8" to /2" male conn. Optional external O-ring QPHA pray Tip Black QPHA-. gpm (. lpm) QPHA-4..4 gpm (. lpm) Use with QPPA body QPHA pray Tip Orange QPHA-.5.5 gpm (. lpm) QPHA-5..5 gpm (2. lpm) Use with QPPA body QPHA pray Tip Green QPHA-5.5 gpm (.9 lpm) QPHA-8.8 gpm (. lpm) Use with QPPA body QPHA pray Tip Yellow QPHA-.5.5 gpm (2.5 lpm) QPHA-0.0 gpm (.8 lpm) Use with QPPA body QPHA pray Tip Beige QPHA-8.8 gpm (. lpm) Use with QPPA body QPHA pray Tip Blue QPHA-0.0 gpm (.8 lpm) QPHA-2.2 gpm (4. lpm) Use with QPPA body QPHA pray Tip Red QPHA-5 gpm (5.7 lpm) QPHA-4.4 gpm (5. lpm) Use with QPPA body Capacities at 0 psi ( ). ORERING INFORMATION META QUICK FUJET NOZZE BOY Body Material Tip Material + /4 QJA + QHA 0 Code PRAY TIP Code ize Example PROMAX QUICK FUJET BPT connections require the addition of a B prior to the inlet connection. NOZZE BOY Body PRAY TIP + Tip ize Example /8 QPPA + QPHA Optional external O-ring for ProMax Quick FullJet nozzle: CP777-2/7-VI BPT connections require the addition of a B prior to the inlet connection. REATIVE ROP IZE IN MICRON 0 to to 500 rop size will vary based on flow rate and pressure. 500 to to 5000 spray.com B5

16 fu Quick FullJet and ProMax Quick FullJet s TANAR ANGE PRAY IE ANGE PRAY N NARRO ANGE PRAY Quick Reference Guide Model Connection Connection ize QJA and QJA bodies F /8 to /2 Materials Performance ata Page Number imensions and eights QJJA and QJJA bodies M /8 to /2 Brass, 0 stainless steel () QGA, QGA, QHA and QHA spray tips NA NA B7 QPPA body M /4 to /8 ProMax QPHA spray tips NA NA B7 B9 QGA-, QGA-, QHA- and QHA- spray tips NA NA Brass, 0 stainless steel () QPHA- spray tips NA NA ProMax B8 QGA-5, QGA-5, QGA-0 and QGA-0 spray tips NA NA Brass, 0 stainless steel () F = female thread; M = male thread. NA = not applicable. There is no material code for brass. eave material code blank when ordering. For ProMax, the material code is built into part number. Other materials available upon request. Brass Quick FullJet nozzles have Buna-N seal. tainless steel FullJet nozzles have a Viton seal. For more dimensions and sizes, contact your sales engineer. ProMax QuickJet nozzle maximum pressures at various temperatures The recommended maximum operating pressure for ProMax QuickJet nozzles varies based on temperature. As temperature increases, the recommended operating pressure decreases. o not use outside of operating range. psi PREURE OPERATING RANGE F C IQUI TEMPERATURE B spray.com..5000

17 Quick FullJet and ProMax Quick FullJet s TANAR ANGE PRAY fu Performance ata: tandard Angle pray Quick FullJet Tip QGA QGA QHA QHA QPHA ize Orifice ia. Nom. Max. Free Passage ia. Flow Rate (liters per minute) pray Angle ( ) /8, /4, /8, / /4, /8, / /8, / / Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. spray.com B7

18 fu Quick FullJet and ProMax Quick FullJet s IE ANGE PRAY N NARRO ANGE PRAY Performance ata: ide Angle pray Quick FullJet Tip QGA- QGA- QHA- QHA- QPHA- ize Orifice ia. Nom. Max. Free Passage ia. Flow Rate (liters per minute) pray Angle ( ) /8, /4, /8, / /4, /8, / /8, / / Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. N Performance ata: Narrow Angle pray Body Quick FullJet Tip QGA-5 QGA-0 QGA-5 QGA-0 ize Orifice ia. Nom. Flow Rate (liters per minute) pray Angle ( ) /8, /4, /8, / /4, /8, / /8, / / /8, /4, /8, / /4, /8, / /8, / B8 spray.com..5000

19 Quick FullJet and ProMax Quick FullJet s TANAR ANGE PRAY IE ANGE PRAY N NARRO ANGE PRAY fu imensions and eights Hex. (idth) Net eight (kg) Hex. (idth) Net eight (kg) QJA (F) + QGA /8, /4, /8, / QJA (F) + QGA- QJA (F) + QGA /8, /4, /8, / /8, / / QPPA (M) + QPHA or QPHA- /8, /4, /8, / / QJA (F) + QGA- QJJA (M) + QGA /8, / /8 0.2 /8, /4, /8, / /8 0. QJA (F) + QGA-5 or QGA-0 /8, /4, /8, / QJJA (M) + QGA- QJJA (M) + QGA QJJA (M) + QGA- QJA (F) + QHA QJA (F) + QHA- QJA (F) + QHA /8, /4, /8, / /8 0.2 /8, / /8 0.2 /8, /2 8. -/ /8, /4, /8, /2 /8, /4, /8, / c /8, /2 0. -/8 0.7 QJA (F) + QGA-5 or QGA-0 QJJA (M) + QGA-5 or QGA-0 QJJA (M) + QGA-5 or QGA-0 /8, / / /8, /4, /8, /2 Based on the largest/heaviest version of each type..9 7/8 0. /8, / /8 0.2 QJA (F) + QHA- /8, / /8 0.4 Body s QJJA (M) + QHA QJJA (M) + QHA- QJJA (M) + QHA QJJA (M) + QHA- /8, /4, /8, /2 /8, /4, /8, / / /8 0.0 /8, /2 0. -/8 c /8, / /8 0.4 F QuickJet and ProMax QuickJet Bodies M /8 QJA QJA QJJA QJJA QPPA /4 /8 /2 Based on the largest/heaviest version of each type. c spray.com B9

20 FU FUJET MAXIMUM FREE PAAGE (MFP) NOZZE TANAR ANGE PRAY OVERVIE: FUJET MAXIMUM FREE PAAGE (MFP) olid cone-shaped spray pattern Patented vane design provides largest free passage of maximum free passage nozzles; ideal for use with fluids with particulates More uniform spray distribution than other large free passage nozzles Uniform spray distribution from.4 to 57 gpm (5. to 2 lpm) Operating pressures up to 80 psi ( ) pray angles: 0, 90 and 5 MFP FullJet s The liquid comes in contact with the vane as it enters the nozzle. The unique vane design stabilizes the fluid before it enters the swirl region. The swirling liquid passes through the nozzle and breaks up as it exits the nozzle orifice. The spray pattern produced is a well-defined cone shape consisting of uniform drops equally distributed throughout the spray pattern. The large, open passages in the nozzle minimize clogging. FUJET MAXIMUM FREE PAAGE (MFP) OPTION PATENTE VANE TECHNOOGY PROVIE UPERIOR PERFORMANCE PU NE IZE AN CAPACITIE NO AVAIABE HMFP /8" to -/2" female conn. HMFP 2" to " female conn. HHMFP /8" to -/2" male conn. HHMFP 2" to " male conn. ORERING INFORMATION FUJET MAXIMUM FREE PAAGE (MFP) Example Material pray Code Angle ize /4 HHMFP BPT connections require the addition of a B prior to the inlet connection. Use material code for stainless steel MFP nozzles. REATIVE ROP IZE IN MICRON 0 to to 500 rop size will vary based on flow rate and pressure. 500 to to 5000 B20 spray.com..5000

21 FUJET MAXIMUM FREE PAAGE (MFP) NOZZE TANAR ANGE PRAY FU QUICK REFERENCE GUIE Model Connection/ Connection ize Materials Performance ata Page Number imensions and eights HMFP F /8 to stainless steel vane and choice of brass or stainless steel () bodies B2B22 HHMFP F -/4 to stainless steel vane and stainless steel () body M /8 to stainless steel vane and choice of brass or stainless steel () bodies B2B22 B2 M -/4 to stainless steel vane and stainless steel () body F = female thread; M = male thread. There is no material code for brass. eave material code blank when ordering. Other materials available upon request. For more dimensions and sizes, contact your sales engineer. PERFORMANCE ATA: TANAR ANGE PRAY HMFP HHMFP ize Approx. Free Passage ia. Flow Rate (liters per minute) pray Angle ( ) 0 eries 90 eries 5 eries / / / / Approximate Free Passage iameter is the approximate diameter as listed of foreign matter that can pass through the nozzle without clogging. spray.com B2

22 FU FUJET MAXIMUM FREE PAAGE (MFP) NOZZE TANAR ANGE PRAY PERFORMANCE ATA: TANAR ANGE PRAY HMFP HHMFP ize Approx. Free Passage ia. Flow Rate (liters per minute) pray Angle ( ) 0 eries 90 eries 5 eries / / Approximate Free Passage iameter is the approximate diameter as listed of foreign matter that can pass through the nozzle without clogging. B22 spray.com..5000

23 FUJET MAXIMUM FREE PAAGE (MFP) NOZZE FU TA N A R A N G E P RAY IMENION AN EIGHT pray Angle ize Hex. Net eight (kg) 0, 90, 5 4, / , 90, / , 90, , 90, 5 5, , 90, / , 90, /8 0. 0, 90, / , 90, /8 0, 90, 5 20, 50, / /4 0, 90, 5 70, 200, 220, 240, /2 0, 90, 5 240, 20, 280, 00, 50, 400, / 2 0, 90, 5 500, 00, 700, /4 dia. 2-/2 0, 90, 5 000, 200, 400, / dia , 90, 5 800, 2000, / dia..25 0, 90, 5 4, / , 90, / , 90, / , 90, 5 5, , 90, / , 90, /8 0. 0, 90, / , 90, /8 0. 0, 90, 5 20, 50, / /4 0, 90, 5 70, 200, 220, 240, /2 0, 90, 5 240, 20, 280, 00, 50, 400, / , 90, 5 500, 00, 700, /4 dia. 2-/2 0, 90, 5 000, 200, 400, / dia , 90, 5 800, 2000, / dia..25 /8 /2 HMFP (F) HMFP (F) /4 /8 /2 HHMFP (M) HHMFP (M) /4 version of each type. Based on the largest/heaviest spray.com B2

24 fu piraljet s: tandard Angle pray and Extra arge Free Passage esign TANAR ANGE PRAY Overview: piraljet olid cone-shaped spray pattern Open passages ideal for use with fluids with particulates Maximum liquid throughput for a given pipe size pray angles from 0 to 70 Uniform spray distribution from.7 to 20 gpm (2.7 to 97 lpm) Operating pressures up to 400 psi (25 ) Compact size enables easy installation or retrofit on most pipe systems Certain nozzles available with U listing for fire protection applications piraljet HHJ and HHJX s The liquid enters the nozzle and passes through the orifice. The liquid exits the nozzle through the voids in the spiral. As it deflects off the spiral surface, a full cone pattern is formed. For other certifications, contact your sales engineer. piraljet Options HHJ /4" to 2" male conn. Hex. body style/ stainless steel Other body styles, connection sizes and materials available. ee Quick Reference Guide. HHJX /8" to 2" male conn. Extra large free passage design Hex. body style/brass Other body styles, connection sizes and materials available. ee Quick Reference Guide. Ordering Information piraljet Example Material pray Code Angle ize /4 HHJ BPT connections require the addition of a B prior to the inlet connection. REATIVE ROP IZE IN MICRON 0 to to 500 rop size will vary based on flow rate and pressure. 500 to to 5000 B24 spray.com..5000

25 piraljet s: tandard Angle pray and Extra arge Free Passage esign TANAR ANGE PRAY fu Quick Reference Guide Model HHJ HHJX Connection/ Connection ize Materials M, Hex. /4 to 2 Brass, stainless steel () M, Flats, Cast /4 to 4 stainless steel () M, Round /4 to 4 Polyvinyl chloride (PVC), PTFE (TEF) M, Hex. /8 to 2 Brass M, Flats, Cast /8 to 2 stainless steel () M, Round /8 to 2 Polypropylene (PP), Polyvinyl chloride (PVC) Performance ata B25 B2 Page Number imensions and eights B2 M = male thread. There is no material code for brass. eave material code blank when ordering. Other materials available upon request. For more dimensions and sizes, contact your sales engineer. Performance ata: tandard Angle pray /4 pray Angle at HHJ ize Orifice ia. Nom. Max. Free Passage ia. Flow Rate (liters per minute) / / / / Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. spray.com B25

26 FU PIRAJET NOZZE: TANAR ANGE PRAY AN EXTRA ARGE FREE PAAGE EIGN TANAR ANGE PRAY PERFORMANCE ATA: TANAR ANGE PRAY pray Angle at HHJX ize Orifice ia. Nom. Max. Free Passage ia. Flow Rate (liters per minute) / / / / Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. IMENION AN EIGHT Hex. Net eight (kg) Hex. Net eight (kg) / / 0.0 / / /8 0. / 0.05 / / 0. / /8 0.0 / / HHJX (M) / / /4 HHJ (M) 5.9 -/ / / / Based on the largest/heaviest version of each type. 0. -/ /2 4.5 Based on the largest/heaviest version of each type. B2 spray.com..5000

27 istribojet s: Extra arge Free Passage esign TANAR ANGE PRAY fu Overview: istribojet Extra arge Free Passage olid cone-shaped spray pattern with round impact area Extra large flow passages and large open orifice eliminate clogging Internal vane is cast as part of the nozzle Uniform spray distribution from 27 to 8728 gpm (22 to 250 lpm) Operating pressures up to 0 psi (4 ); full cone pattern develops at psi (.07 ) 50, 0, 80 and 95 spray angles; 50 and 5 styles feature specially designed grooved orifices for accurate flow rates and spray angle control istribojet R, RF and RR s The liquid comes in contact with the vane cast inside the nozzle as it enters. This contact causes the liquid to swirl. As the liquid flows through the extra large flow passages, the liquid continues to swirl. The liquid breaks up as it exits the large open orifice producing a deluge-like cone pattern. istribojet Extra arge Free Passage Options R 2" to 8" female conn. RF 4" to 2" flange conn. RR 2" to 8" male conn. Ordering Information istribojet Extra arge Free Passage esign Example Material pray Code Angle ize 2 RR BPT connections require the addition of a B prior to the inlet connection. REATIVE ROP IZE IN MICRON 0 to to 500 rop size will vary based on flow rate and pressure. 500 to to 5000 spray.com B27

28 fu istribojet s: Extra arge Free Passage esign TANAR ANGE PRAY Quick Reference Guide Model Connection/ Connection ize Materials Performance ata Page Number imensions and eights R F, Cast 2 to 8 RR M, Cast 2 to 8 Brass, stainless steel () B28, B29 B29 RF Flange, Cast 4 to 2 F = female thread; M = male thread. There is no material code for brass. eave material code blank when ordering. Other materials available upon request. For more dimensions and sizes, contact your sales engineer. Performance ata: tandard Angle pray R RR RF pray Angle ize Flow Rate (liters per minute) / For orifice information, contact your sales engineer B28 spray.com..5000

29 istribojet s: Extra arge Free Passage esign TANAR ANGE PRAY fu Performance ata: tandard Angle pray R RR RF pray Angle ize Flow Rate (liters per minute) For orifice information, contact your sales engineer. imensions and eights (ia.) Net eight (kg) / R (F) / RR (M) RF (Flange) Based on the largest/heaviest version of each type. spray.com B29

30 fu FullJet s: quare and Oval spray patterns and Vaneless design TANAR ANG E PRAY I E A N G E P R AY Overview: FullJet quare and Oval pray Patterns and Vaneless esign FullJet G and H quare pray s FullJet G-V and GG-V s quare spray As the liquid enters the nozzle, it flows over and through the vane. This creates the initial swirling of the liquid. The design of the nozzle ensures the liquid continues to swirl after passing through the vane. As the liquid exits the orifice, it interacts with cross cuts located on the face of the nozzle and forms a square spray pattern. Oval spray As the liquid enters the nozzle, it flows over and through the vane. This creates the initial swirling of the liquid. The design of the nozzle ensures the liquid continues to swirl after passing through the vane. The exit orifice of the nozzle has an oval shape. The liquid follows the oval shape as it exits the nozzle. FullJet GANV and GGANV s Vaneless spray The liquid begins to swirl as it enters the swirlchamber. The swirling continues as it passes through the orifice. The breakup of the liquid occurs as it exits the nozzle orifice in a well-defined cone pattern. FullJet square spray pattern Cone-shaped spray pattern with square-like impact area for coverage of rectangular areas or spray zones Unique vane design and large flow passages provide superior spray pattern control Uniform spray distribution from.2 to 977 gpm (. to 77 lpm) Operating pressures up to 50 psi (0 ) pray angles: tandard 4 to 94, ide 2 to 20 G-Q /8" to /2" female conn. Removable cap and vane FullJet quare spray Options H-Q " female conn. One-piece body GG-Q /8" to /2" male conn. Removable cap and vane H-Q -/4" to " female conn. Removable vane/cast body H-Q /4" to " female conn. One-piece body H-Q -/4" to " female conn. Removable vane/cast body HH-Q /8" to " male conn. One-piece body B0 HH-Q /4" to " male conn. One-piece body spray.com..5000

31 FUJET NOZZE: QUARE AN OVA PRAY PATTERN AN VANEE EIGN TANAR ANGE PRAY FU FUJET OVA PRAY PATTERN olid cone-shaped spray pattern with oval impact area; the width of the spray is approximately half its length Unique vane design provides superior spray pattern control Uniform spray distribution from.59 to.2 gpm (2.2 to.9 lpm) Operating pressures up to 50 psi (0 ) pray angles: tandard 4 to 94 G-V /8" female conn. Removable cap and vane GG-V /8" male conn. Removable cap and vane FUJET VANEE EIGN olid cone-shaped spray pattern with round impact area Uniform spray distribution from.5 to 2 gpm (.4 to 87 lpm) Operating pressures up to 00 psi (7 ) No vane for unrestricted flow coarse spray is projected at 90 from axis at the inlet pray angles: tandard 4 to 94 GANV /4" to /2" female conn. Vaneless design Removable cap GGANV /4" to /2" male conn. Vaneless design Removable cap ORERING INFORMATION FUJET QUARE PRAY PATTERN Material Code ize Example /4 G 2Q FUJET OVA PRAY PATTERN Material Code ize BPT connections require the addition of a B prior to the inlet connection. Example /8 G 4.9V BPT connections require the addition of a B prior to the inlet connection. FUJET VANEE EIGN Material Code ize Example /4 GANV 0 BPT connections require the addition of a B prior to the inlet connection. REATIVE ROP IZE IN MICRON 0 to to 500 rop size will vary based on flow rate and pressure. 500 to to 5000 spray.com B

32 fu FullJet s: quare and Oval spray patterns and Vaneless design TANAR ANGE PRAY IE ANGE PRAY Quick Reference Guide Model Connection/ Connection ize Materials Performance ata Page Number imensions and eights G-Q GG-Q F M /8 to /2 Brass, Mild steel (I), 0 stainless steel (), stainless steel () B2 H-Q F Brass, Mild steel (I), 0 stainless steel () B2 H-Q F, Cast -/4 to Brass, stainless steel () B HH-Q M /8 to Brass, Mild steel (I), 0 stainless steel (), stainless steel (), Polyvinyl chloride (PVC) B2 H-Q F /4 to Brass, Mild steel (I), 0 stainless steel (), stainless steel () H-Q F, Cast -/4 to Brass, stainless steel () B B5 HH-Q M /4 to Brass, Mild steel (I), 0 stainless steel (), stainless steel (), Polyvinyl chloride (PVC) G-V GG-V GANV GGANV F M F M /8 Brass, 0 stainless steel () /4 to /2 Brass, 0 stainless steel () B4 F = female thread; M = male thread. There is no material code for brass. eave material code blank when ordering. Other materials available upon request. For more dimensions and sizes, contact your sales engineer. Performance ata: tandard Angle pray G-Q GG-Q HH-Q H-Q ize Orifice ia. Nom. Max. Free Passage ia. 0.4 Flow Rate (liters per minute) pray Angle ( ) 7 0.Q /8 4.8Q Q Q /4 2Q Q /8 8Q /2 29Q Q /4 50Q Q Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. B2 spray.com..5000

33 FullJet s: quare and Oval spray patterns and Vaneless design TANAR ANGE PRAY IE ANGE PRAY fu Performance ata: tandard Angle pray G-Q GG-Q HH-Q H-Q ize Orifice ia. Nom. Max. Free Passage ia. 0.4 Flow Rate (liters per minute) pray Angle ( ) 7 0 -/4 77Q /2 20Q Q Q Q Q /2 590Q Q Q Q Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. Performance ata: ide Angle pray H-Q HH-Q ize Orifice ia. Nom. Max. Free Passage ia. 0.4 Flow Rate (liters per minute) pray Angle ( ) 0.4 /4 4Q Q /8 20Q Q Q Q Q /2 40Q Q Q /4 7Q Q /4 90Q /2 290Q Q /2 80Q Q Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. spray.com B

34 fu FullJet s: quare and Oval spray patterns and Vaneless design TANAR ANGE PRAY Performance ata: tandard Angle pray /8 Max. Flow Rate (liters per minute) pray Angle ( ) Free Passage ize ia. G-V GG-V A B A B A B A B 4.9V V V V Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. Calibration pressure = 0 psi ( ). Performance ata: tandard Angle pray GANV GGANV ize Orifice ia. Nom. Max. Free Passage ia. 0.4 Flow Rate (liters per minute) pray Angle ( ) / / / Maximum Free Passage iameter is the maximum diameter as listed of foreign matter that can pass through the nozzle without clogging. B4 spray.com..5000

35 FullJet s: quare and Oval spray patterns and Vaneless design TA N A R A N G E P R AY fu I E A N G E P RAY imensions and eights Net (ia.) eight (kg) Hex. / / /4 4. / G-Q (F) /8 0. 9/ 0.0 /4.5 / 0.0 GG-Q (M) H-Q (F) Cast HH-Q (M) / / / / /8 5.. HH-Q (M) H-Q (F) 8. c 8. Hex. / / / / / / / / /8 8. / /8 8. / H-Q (F) Net (ia.) eight (kg) B G-V (F) H-Q (F) Cast 8. -7/8 oct / /8 oct /8 oct..7 -/4 2-/ /8 oct..2 -/4 oct oct A A / / c Based on the largest/heaviest version of each type. GG-V (M) c Based on the largest/heaviest version of each type. A B C Net eight (kg) B B GANV (F) C C / A A /4 c B B GGANV (M) C C / c 20. /8 28. Based on the largest/heaviest version of each type. A spray.com B B5

36 fu UniJet s: tandard and ide Angle sprays and quare pray patterns TANAR ANGE PRAY IE ANGE PRAY Overview: UniJet Quick-connect nozzles reduce maintenance time bodies remain on pipe/header ave on nozzle replacement costs bodies can be reused, only spray tips are replaced; tips fit on male or female bodies olid cone-shaped spray pattern with round impact area or cone-shaped spray pattern with square-like impact area for coverage of rectangular areas or spray zones pray angles: tandard 4 to 9, ide 2 to 20 Uniform spray distribution from.08 to 7.4 gpm (. to 28 lpm) Operating pressures up to 00 psi (20 ) UniJet and TG s As the liquid enters the nozzle, it passes through an internal strainer and into the slotted core where the swirling begins. The swirling continues as the liquid passes through a disc. The breakup of the liquid occurs as it exits the orifice, producing a well-defined cone pattern. The drops are uniform in size and distributed equally throughout the spray pattern. UniJet Options Tip Retainer isc TT Body/Cap /8" to /2" male conn. T Body/Cap /8" to /2" female conn. Core trainer T Body TG pray Tip Use with T or TT bodies and tip retainer TG- pray Tip Use with T or TT bodies and tip retainer pray Tip + T Body /4" female conn. isc and core type Use with slotted strainer and tip retainer TG-Q pray Tip Use with T or TT bodies and tip retainer TH- pray Tip Tip and retainer in one Use with T or TT bodies B spray.com..5000