Current Transformer, Termination & Disconnect Cabinets WE Energies Approved
|
|
- Paulina Dalton
- 5 years ago
- Views:
Transcription
1 Current Transformer, Termination & Disconnect Cabinets WE Energies Approved
2 2 TABLE OF CONTENTS Table of Contents Current Transformer Cabinets Overhead Entry... 4 Underground Entry and Underground Exit... 5 Pad Mount... 6 Termination Cabinets Wall Mount... 7 Pad Mount... 8 Current Transformer & Disconnect Cabinets Wall Mount... 9 Overhead Entry and Underground Exit Pad Mount Wall Mount Cable-Closure Wireways Cable-Closure Wireways WE CAB 11/16
3 Highlights & Features 3 CT Cabinets Three-Point Latching Handle & Locking Mechanism: Padlocking handle with three-point latching system allows for easy locking and securing of the unit. Lugs: Tin plated aluminum, suitable for aluminum or copper conductors and rated for 90. Lugs are sized for #4-600 MCM. Potential Tap: Included on buss Grounding lug: Included Wind-stop latch Aluminum shell UL Listed NEMA 3R rated for indoor or outdoor applications Termination Cabinets Three-Point Latching Handle & Locking Mechanism: Padlocking handle with three-point latching system allows for easy locking and securing of the unit. Lugs: Tin plated aluminum, suitable for aluminum or copper conductors and rated for 90. Lugs are sized for #4-600 MCM. NEMA 3R rated for indoor or outdoor applications Disconnect Cabinets Three-Point Latching Handle & Locking Mechanism: Padlocking handle with three-point latching system allows for easy locking and securing of the unit. NEMA 3R rated for indoor or outdoor applications Either fuse pull-out or circuit breaker options available WE CAB 11/16
4 4 Current Transformer Cabinets WE Energies Area Units UL listed Overhead Entry Notes WEM H" W" D" Cabinet Drawing Bus Drawing WEM Ø3W 65kA A WEM-403-8* Ø3W 65kA A WEM Ø4W 65kA A WEM Ø3W 65kA A WEM-603-8* Ø3W 65kA A WEM Ø4W 65kA A WEM Ø3W 65kA A WEM-803-8* Ø3W 65kA A WEM Ø4W 65kA A WEM * Ø3W 85kA A WEM Ø4W 85kA A WEM * Ø3W 85kA A WEM Ø4W 85kA A WEM * Ø3W 85kA A WEM Ø4W 85kA A A meter socket is provided and is mounted on the door of all WE Energies units. * These units are being phased out by WE Energies. WE CAB 11/16
5 Current Transformer Cabinets WE Energies Area Units UL listed 5 WEM UG Underground Entry or Underground Exit H" W" D" Cabinet Drawing Bus Drawing WEM Ø3W 65kA A WEM-403-8* Ø3W 65kA A WEM Ø4W 65kA A WEM-603-6UG Ø3W 65kA A WEM-603-8UG* Ø3W 65kA A WEM UG Ø4W 65kA A WEM-803-6UG Ø3W 65kA A WEM-803-8UG* Ø3W 65kA A WEM UG Ø4W 65kA A WEM UG* Ø3W 85kA A WEM UG Ø4W 85kA A WEM UG* Ø3W 85kA A WEM UG Ø4W 85kA A WEM UG* Ø3W 85kA A WEM UG Ø4W 85kA A WEM UG Ø4W 85kA A WE CAB 11/16
6 6 Current Transformer Cabinets WE Energies Area Units UL listed Pad Mount Underground Entrance H" W" D" Cabinet Drawing Bus Drawing WEM-403-6PM Ø3W 65kA A WEM-403-8PM Ø3W 65kA A WEM PM Ø4W 65kA A WEM-603-6PM Ø3W 65kA A WEM-603-8PM Ø3W 65kA A WEM PM Ø4W 65kA A WEM-803-6PM Ø3W 65kA A WEM-803-8PM Ø3W 65kA A WEM PM Ø4W 65kA A WEM PM Ø3W 85kA A WEM PM Ø4W 85kA A WEM PM Ø3W 85kA A WEM PM Ø4W 85kA A WEM PM Ø3W 85kA A WEM PM Ø4W 85kA A WEM PM Ø4W 85kA A WE CAB 11/16
7 Termination Cabinets 7 Wall Mount Underground Entry & Underground Exit Lugs (size) Per Phase H" W" D" Drawing TBWEM Ø3W 50kA TBWEM Ø3W 50kA TBWEM Ø4W 50kA TBWEM Ø3W 65kA TBWEM Ø3W 65kA TBWEM Ø4W 65kA TBWEM Ø3W 65kA TBWEM Ø3W 65kA TBWEM Ø4W 65kA TBWEM Ø3W 65kA TBWEM Ø4W 65kA TBWEM Ø3W 65kA TBWEM Ø4W 65kA TBWEM Ø3W 65kA TBWEM Ø4W 65kA TBWEM Ø3W 65kA TBWEM Ø4W 65kA Notes TBWEM Wire bending space meets the National Electric Code requirements per Tables 373-6(A) and 373-6(B) Cabinets are constructed of aluminum and rated NEMA 3R for indoor or outdoor use. The hinged door employs a 3-point latch and has provisions for padlocking. 600 MCM load lugs are provided in quantities as shown above. The neutral bonding strap is provided. WE CAB 11/16
8 8 Termination Cabinets Pad Mount Underground Entry & Underground Exit Lugs (size) Per Phase H" W" D" Drawing TBWEM-413-1PM Ø3W 50kA TBWEM-433-1PM Ø3W 50kA TBWEM-434-1PM Ø4W 50kA TBWEM-613-2PM Ø3W 65kA TBWEM-633-2PM Ø3W 65kA TBWEM-634-2PM Ø4W 65kA TBWEM-813-2PM Ø3W 65kA TBWEM-833-2PM Ø3W 65kA TBWEM-834-2PM Ø4W 65kA TBWEM PM Ø3W 65kA TBWEM PM Ø4W 65kA TBWEM PM Ø3W 65kA TBWEM PM Ø4W 65kA TBWEM PM Ø3W 65kA TBWEM PM Ø4W 65kA TBWEM PM Ø3W 65kA TBWEM PM Ø4W 65kA Notes Wire bending space meets the National Electric Code requirements per Tables 373-6(A) and 373-6(B) Cabinets are constructed of aluminum and rated NEMA 3R for indoor or outdoor use. The hinged door employs a 3-point latch and has provisions for padlocking. 600 MCM load lugs are provided in quantities as shown above. The neutral bonding strap is provided. WE CAB 11/16
9 Current Transformer & Disconnect Cabinets 9 Boltswitch Fusible Pullouts Drawing number WEM-CTPT12B /240 1Ø3W 65kA PAT325-2P BELOW CT WEM-CTPT12B Y/120 3Ø4W 65kA PAT325 BELOW CT WEM-CTPT14B Y/277 3Ø4W 65kA PAT365 BELOW CT A Wall Mount Overhead or Underground Entry & Underground Exit (2) 200 Amp GE Circuit Breaker WEM-CTSFH22B /240 1Ø3W 65kA SFHA24AT0250 BELOW CT WEM-CTSFH22B Y/120 3Ø4W 65kA SFHA36AT0250 BELOW CT WEM-CTSFH24B Y/277 3Ø4W 35kA SFHA36AT0250 BELOW CT WEM-CTSFL24B Y/277 3Ø4W 65kA SFLA36AT0250 BELOW CT (2) 200 Amp Square D Circuit Breaker WEM-CTJGL22B /240 1Ø3W 65kA JGL26200 BELOW CT WEM-CTJGL22B Y/120 3Ø4W 65kA JGL36200 BELOW CT WEM-CTJGL24B Y/277 3Ø4W 35kA JGL36200 BELOW CT WEM-CTJJL24B Y/277 3Ø4W 65kA JJL36200 BELOW CT Notes A meter socket is provided and is mounted on the door of all WE Energies units. WE CAB 11/16
10 10 Current Transformer & Disconnect Cabinets Wall Mount Overhead or Underground Entry & Underground Exit (1) 400 Amp Cutler Hammer Circuit Breaker Drawing number WEM-CTDK12B /240 1Ø3W 65kA DK2400 BELOW CT WEM-CTDK12B Y/120 3Ø4W 65kA DK3400 BELOW CT WEM-CTKDB14B Y/277 3Ø4W 35kA KDB3400 BELOW CT WEM-CTHKD14B Y/277 3Ø4W 65kA HKD3400 BELOW CT (1) 400 Amp Square D Circuit Breaker Drawing number WEM-CTLGL12B /240 1Ø3W 65kA LGL36400U31X BELOW CT WEM-CTLGL12B Y/120 3Ø4W 65kA LGL36400U31X BELOW CT WEM-CTLGL14B Y/277 3Ø4W 35kA LGL36400U31X BELOW CT WEM-CTLJL14B Y/277 3Ø4W 65kA LJL36400U31X BELOW CT WE CAB 11/16
11 Current Transformer & Disconnect Cabinets 11 Overhead Entry and Underground Exit (1) 600 Amp Cutler-Hammer Circuit Breaker WEM-CTLD12B /240 1Ø3W 65kA LD2600 BELOW CT WEM-CTLDB14B Y/277 3Ø4W 35kA LD3600 BELOW CT WEM-CTHLD14B Y/277 3Ø4W 65kA HLD3600 BELOW CT (1) 600 Amp GE Circuit Breaker WEM-CTSKL12B /240 1Ø3W 65kA SGLA26AT0600 BELOW CT WEM-CTSKH14B Y/277 3Ø4W 35kA SGHA36AT0600 BELOW CT WEM-CTSKL14B Y/277 3Ø4W 65kA SGLA36AT0600 BELOW CT (1) 600 Square D Circuit Breaker Circuit Breaker WEM-CTMGL12B /240 1Ø3W 65kA MGL26600 BELOW CT WEM-CTMGL12B Y/120 3Ø4W 65kA MGL36600 BELOW CT WEM-CTMGL14B Y/277 3Ø4W 35kA MGL36600 BELOW CT WEM-CTMJL14B Y/277 3Ø4W 65kA MJL36600 BELOW CT Pad Mount (1) 600 Amp Square D Circuit Breaker Circuit Breaker WEM-CTMGL12B-613-6PM /240 1Ø3W 65kA MGL26600 LEFT OF CT WEM-CTMGL12B PM Y/120 3Ø4W 65kA MGL36600 LEFT OF CT WEM-CTMGL14B PM Y/277 3Ø4W 35kA MGL36600 LEFT OF CT WEM-CTMJL14B PM Y/277 3Ø4W 65kA MJL36600 LEFT OF CT WE CAB 11/16
12 12 Current Transformer & Disconnect Cabinets Wall Mount Overhead Entry & Underground Exit (1) 800 Amp Cutler-Hammer Circuit Breaker WEM-CTMDL12B /240 1Ø3W 65kA MDL2800 BELOW CT WEM-CTMDL14B Y/277 3Ø4W 35kA MDL3800 BELOW CT WEM-CTHMDL14B Y/277 3Ø4W 65kA HMDL3800 BELOW CT (1) 800 Amp General Electric Circuit Breaker WEM-CTSKL12B /240 1Ø3W 65kA SKLA26AT0800 BELOW CT WEM-CTSKH14B Y/277 3Ø4W 50kA SKHA36AT0800 BELOW CT WEM-CTSKL14B Y/277 3Ø4W 65kA SKLA36AT0800 BELOW CT Notes Suitable for reverse feed. A meter socket is provided and is mounted on the door of all WE Energies units. WE CAB 11/16
13 Cable-Closure Wireways 13 Cabinet Size Catalog Number Ampacity Ship Weight H" W" D" CCM CCM CCM CCLM CCLM CCLM CCLM WE CAB 11/16
CT Metering. CT Metering. Meter Mounting Equipment
Single Meter Sockets, Without Bypass - CT Rated.................................. 67-68 Single Meter Sockets, CT Rated With Test Switch Bypass Provision............. 69-70 Meter Socket / Enclosure Combination
More informationCABINET - INSTRUMENT TRANSFORMER Indoor - Outdoor, 480 Volt Maximum 1200, 1600, 2000 Ampere
Printed from NIPSCO.com 04-01-17 PAGE 1 OF 6 USE: 1. For commercial and industrial installation, purchased and installed by the customer. 2. To enclose 600 volt insulation class instrument transformers
More informationGroup Meter Main - Without Bypass
100 Amp Vertical 2012 MS60 (closed) 2012 MS60 (open) Application For vertical multi-meter/mains installations - 6 position maximum 225A and 400A main buss Main breaker provisions - breakers not included
More information10 Commercial, Industrial, Agricultural Services
10 Commercial, Industrial, Agricultural Services This section describes the Power Company requirements for commercial, industrial, and agricultural services. This section covers single phase and three
More information5.11. Metering Products 3 MTB 400 R C. Group Metering. Catalog Number Selection
.11 Selection Phase 1 = Single-phase 3 = Three-phase Type of Metering BTB = Main terminal box MCB = Main circuit breaker BPS = Bolted pressure switch MFS = Main fusible switch UGPB = Underground pull box
More informationAMENDMENT ELECTRIC SERVICE MANUAL 2014
AMENDMENT (Pages 20,43,50,72,74,,76,78,83,86,99) ELECTRIC SERVICE MANUAL 2014 Effective April 1, 2015 18-7 6.0 SERVICE AND SERVICE ENTRANCES (General), Continued Conductor Sizing It is recommended that
More informationNew York City Apartment Metering Meter Sockets / Load Centers
s New York City Apartment Metering Meter Sockets / Load Centers Selection and Application Guide Bulletin RPSA-S0001 Before You Begin... System Parameters Mounting: Indoor only Input: 208Y/120V AC, 3 Phase,
More informationContents. General Electric Sangamo Astra CTB JCT-10 R6B TAB, TA CSF JCM-0 R6BA TCB, AA CMF JCW-0 R6M AB
Panelboards and Lighting Control Metering Service Sections.7 Metering Service Section Contents Description Metering Service Sections Page Catalog Number Selection........................ 482 Product Selection..............................
More information9. Non-Residential Services (Commercial, Industrial, and Agricultural)
Section 9 2016 Electric Service Requirements, 3rd Edition Section 9 Non-Residential Services Directory Page 9.1 General Requirements 68 9.2 Direct-Connect Metering, Single Installations 69 9.3 Direct-Connect
More informationStandard switch modules (type WS) are designed for flexibility, space savings, & durability.
Power Mod Standard switch modules (type WS) are designed for flexibility, space savings, & durability. Features include: QuickSystem features Standard compression lug capability Invertibility: 400-800
More informationGE Consumer & Industrial
GE stock list for connector kits and replacement breakers (most common) Breaker Mounting Hardware for Spectra bolt-on and Jiffy (includes hardware, brackets and filler plate) AMCB4EYFP AMCB6EYFP AMCB6EBFP
More informationAmerican Electric Supply, Inc.
American Electric Supply, Inc. 6 S. Maple Street Date: 0/8/204 Corona, CA 92880 Telephone: 95-80-4665 Email: bmcdonald@amelect.com Fax: 95-552-626 Speedi Version: V 0.6 Valued Customer, Bill of Material
More informationCON EDISON EQUIPMENT
CON EDISON EQUIPMENT Con Ed Navtech Size Volts Amps List Spec. Cat. No Description Price 205 N-205 10x10x5 100 $72.00 205 RTN-205 10x10x5 100 190.00 215 N-215 24x12x8 200 144.00 215 RTN-215 24x12x8 200
More information2018 Consultant s Handbook Division 26 Electrical 2413 Switchboards
1 General 1.1 Switchboards shall be U.L. listed and labeled. 1.2 Each switchboard shall have its own main disconnecting means unless it is located in the same room as its source of origin. In most cases
More informationLighting and Power Distribution Panelboards
EXPLOSIONPROOf Lighting and Power Distribution Panelboards The design offers sufficient gutter space on sides to allow through wiring and easy lug connection. All enclosures are furnished with hinges,
More informationCABINET - CURRENT TRANSFORMER Indoor - Outdoor 240 Volts Amperes Maximum
PAGE 1 OF 5 USE: 1. For commercial and industrial installations purchased and installed by the Customer. 2. For use on the following services: 1 phase 3 wire 240 volts, 3 phase 3 wire 240 volts, 3 phase
More informationChapter 2 ELECTRIC SERVICE EQUIPMENT EQUIPMENT - METER CABINETS Issued Jan. 2016
ELECTRIC SERVICE EQUIPMENT EQUIPMENT - METER CABINETS Issued Jan. 2016 ELECTRIC SERVICE EQUIPMENT METER CABINETS CHAPTER 2 E200. TECHNICAL SPECIFICATIONS FOR METERING TRANSFORMER CABINETS AND CONDUCTOR
More informationBulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers
Bulletin 1494D Fixed-Depth Flange-Mounted Circuit Breakers Bulletin 1494D Fixed Depth Flange Mounted Circuit Breaker Operating Mechanism Industrial rated circuit breaker operating mechansim pre-assembled
More informationMP Meter-Pak Meter Centers
Catalog 4141CT0701 2008 Class 4141 MP44125 MP86200 CONTENTS Description..............................................Page Product Description........................................... 2 General and Application
More informationMEG Approval Meter Equipment Group
MEG Approval Meter Equipment Group MILBANK OVERVIEW Milbank Overview Energy At Work since 97 Milbank designs and manufactures electrical solutions that move and manage power for the residential, commercial,
More informationModular Metering Construction Details
GE Consumer & Industrial Electrical Modular Metering Construction Details Contents Meter Mod III Main Breaker Module, Single Phase, Top or Bottom Feed...........................1 Main Switch Module, Single
More informationSection 6 Electric Metering: Residential
Section 6 Electric Metering: Residential 6.1. Scope This section provides specific information for residential metering that is not covered by the basic requirements in Section 5, Electric Metering: General.
More informationNew England. Area Catalog. Milbank Manufacturing 4801 Deramus Ave., Kansas City, MO milbankworks.com
New England Area Catalog Milbank Manufacturing 480 Deramus Ave., Kansas City, MO 640 877.48.54 milbankworks.com MILBANK OVERVIEW Milbank Overview Energy At Work since 97 Milbank provides the tools that
More informationPretest Module 24 Three-phase Service Entrance
Pretest Module 24 Three-phase Service Entrance 1. What is the most widely used three-phase service entrance system? 2. What are the three most common voltage combinations for three-phase, four-wire systems?
More informationCURRENT TRANSFORMER METERING (TRANSOCKETS) WITH OVERHEAD SERVICE ENTRANCE
4, 5 & 7-TERMINAL MODULAR METERING UNITS 1Ø 3-Wire 120/240 or s 0-200 s per position M-22 3Ø 3-Wire 240 Volts or 480 Volts (Ungrounded) 0-200 s per position M-22 3Ø 4-Wire 208Y/120 or s 0-200 s per position
More informationSwitchgear Skid, C1192
CUSTOM SOLUTIONS 15kV Modular Stairs stored on floor in front of battery bay Ground grid stored on front tongue of trailer Stairs deployed for unit access Storage box for fencing materials and other parts
More informationDetail Bill of Material Page 1 of 2 Project Name: Arc Eng Exposition Negotiation No: LAEC0706X6K1 General Order
Detail Bill of Material Page 1 of 2 Project Name: Negotiation No: LAEC0706X6K1 General Order Alternate No: 0000 No: Item No. Qty Product Description 1 Pow-R-Line C Switchboard, Front Access/ Front and
More information4.5. Switchboards. Contents Description Instant Service Switchboards Product Selection...
.5 Type 1 Indoor Product Description Eaton s Instant are designed as stocked units to provide fast delivery to match the needs of the construction market. Suitable for use as service entrance equipment,
More informationMeter Mains - Without Bypass
- 100 & 200 Amp Application Single meter position Receive ANSI C12.10 watthour meters Surface or flush mount (see chart) 1M1R (closed) U2M2R (open) Construction Ring type NEMA Type 3R ANSI 61 gray E-coat
More informationPlexPower Fused Factory Sealed Panelboard with Bus Bar Up to 30 Amps. Stainless Steel Enclosures
Applications The PlexPower panelboard provides indoor and outdoor protection and control of electrical circuits in hazardous environments such as: Petroleum plants Chemical plants Refineries Wastewater
More informationOptions: PART NUMBER MAIN BREAKER PHASE VOLTAGE
BC Hydro Metering Kiosk BCH Metering and distribution kiosk built to BC Hydro distribution standards. Used for applications where secondary services are installed in weatherproof kiosks outside of a main
More informationWisconsin Area Catalog
Wisconsin Area Catalog Milbank Manufacturing 480 Deramus Ave., Kansas City, MO 640 877.48.54 milbankworks.com MILBANK OVERVIEW Milbank Overview Energy At Work since 97 Milbank builds solutions that move
More informationIndiana Meter Mounting Equipment
Indiana Meter Mounting Equipment Milbank Manufacturing 480 Deramus Ave., Kansas City, MO 640 877.48.54 milbankworks.com MILBANK OVERVIEW Milbank Overview Energy At Work since 97 Milbank builds solutions
More informationC1000 Series Automatic Cap Bank
C1000 Series Automatic Cap Bank Metal Enclosed - Medium Voltage Capacitors Assemblies Fixed / Auto Medium Voltage 5, 15, 25 and 35 kv Class Customized to your specifications The Reactive Power Solution
More informationCABINET - CURRENT TRANSFORMER Indoor - Outdoor 240 Volts Amperes Maximum
PAGE 1 OF 5 USE: 1. For commercial and industrial installations, purchased and installed by customer. 2. For use on the following services: 1 phase 3 wire 240 volts, 3 phase 3 wire 240 volts, 3 phase 4
More informationModular Metering. Canadian Version
Modular Metering Canadian Version Meter Centres and Tenant Breakers...2 Industrial Multi-Metering...3 Main Service Modules...4 Main Terminal Boxes...7 Main Circuit Breakers...8 Main Fusible Switches...9
More information1. Division 26 Section "Elevator Shunt-Trip Fused Disconnect Switches".
SECTION 26 28 16 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and other Division 01 Specification Sections,
More informationREC Municipal Meter Mounting Equipment
REC Municipal Meter Mounting Equipment Milbank Manufacturing 480 Deramus Ave., Kansas City, MO 640 877.48.54 milbankworks.com MILBANK OVERVIEW Milbank Overview Energy At Work since 97 Milbank builds solutions
More informationSECTION PANELBOARDS
SECTION 16470 PANELBOARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The general provisions of the contract including General and Special Conditions and General Requirements shall apply to all work under
More informationAGRICULTURAL UNDERGROUND SERVICE 500 HP OR LESS
Prepared by: ABB1 AGRICULTURAL UNDERGROUND SERVICE 500 HP OR LESS 05619 Asset Type: Electric Metering Function: Design and Construction Issued by: Lisseth Villareal (LDV2) Date: 07-31-15 Rev. #10: This
More informationOptions. Meter base. Cooling Up fan to 22 kaic rated breakers SERVICE
ADPA ADPA alid ADPA This marine-grade aluminum distribution panel is generally used for highways lighting control. It is a base This mount marine-grade design with aluminum the cables distribution entering
More informationMeter Centers & Loadcenters Group Metering
June 006 Sheet 1015 5MM, 7MM, 5SS and 7SS Main Circuit s The following breakers are to be used on 5MM, 7MM, 5SS and 7SS modular metering stacks. Series rating information available on Pages 6.1-8 through
More informationOhio Meter Mounting Equipment
Ohio Meter Mounting Equipment Milbank Manufacturing 480 Deramus Ave., Kansas City, MO 640 877.48.54 milbankworks.com MILBANK OVERVIEW Milbank Overview Energy At Work since 97 Milbank designs and manufactures
More informationDuke/MEG Approval Meter Equipment Group
Duke/MEG Approval Meter Equipment Group Milbank Manufacturing 480 Deramus Ave., Kansas City, MO 640 877.48.54 milbankworks.com MILBANK OVERVIEW Milbank Overview Energy At Work since 97 Milbank provides
More informationD2P and EWP Factory Sealed Circuit Breaker Panelboards Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
Applications Protection and control of electrical equipment and circuits such as lighting and heat tracing in hazardous locations or in damp, wet or corrosive conditions. D2P Series designed for use in
More informationCustomer Requirements Meter Socket Configurations
Application Information on meter socket configurations available from Tacoma Power. For enclosed meter pedestals, see standard C-MR-0020 Customer Requirements, Enclosed Meter Pedestal. General Requirements
More informationFROM B.C. HYDRO ENCLOSURE (SEE NOTE 4) RIGID CONDUITS (SEE NOTE 8) ALTERNATIVE TO LOAD BARRIER (SEE NOTE 7) SERVICE ENTRANCE ENCLOSURE
FROM B.C. HYDRO FOR OVERHEAD INSTALLATION ONLY DUCT SEAL (SEE NOTE 8) PULL BOX (SEE NOTE 5) PULL BOX (SEE NOTE 5) FROM B.C. HYDRO 7- REVISED NOTES & TABLES ON PAGES,3,4,5,.MARCH AJ - GENERAL REV.MA 08
More informationSECTION LOW VOLTAGE DISTRIBUTION EQUIPMENT
SECTION 16400 LOW VOLTAGE DISTRIBUTION EQUIPMENT A. General 1. The University does not accept Series-Rated equipment for power distribution switchboards, distribution panels and branch circuit panelboards.
More informationEngineering Service Specifications. Commercial Single-Phase Current Transformer Metering Schemes
Engineering Service Specifications Commercial Single-Phase Current Transformer Metering Schemes Specifications for Commercial Underground Current Transformer Metering Requirements for a Single-Phase Customer
More informationENTRANCE EQUIPMENT ER D PAGE 1 OF 5
PAGE 1 OF 5 USE: Requirements for entrance equipment. PREVIOUS REVISION 07-01-98 ORIGINATED 03-94 PREVIOUS NUMBER ER 100 (12-01-81) LATEST REVISION: Updated meter socket labeling specification and instrument
More informationMetering and Service Installation:
Table of Contents 1. Metering Installation Requirements, General... 1 2. Type of Service... 2 3. Definitions... 2 4. Who Provides Metering Equipment?... 2 5. Establishment of Service... 2 6. Meter Access...
More informationUNIVERSITY OF WASHINGTON Facilities Services Design Guide. Electrical. Switchboards. Basis of Design. Design Evaluation
Basis of Design This section applies to the design relating to low voltage switchboards. Design Criteria UW Class N1 facilities main switchboards shall be rear accessible. The main, tie and feeder breakers
More informationUNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
More informationEylander Electric Inc
Eylander Electric Inc. 1-800-932-8986 To Order Call: 1-800-932-8986 ADVANTAGES OF THE MTS MANUAL TRANSFER 1. THE MOST VERSATILE Assembled from CUTLER-HAMMER CH and BR (old Challenger/Westinghouse), GENERAL
More information1. The term "withstand" means "the unit will remain in place without separation of any parts from the device when subjected to the seismic forces.
SECTION 262816 - ENCLOSED SWITCHES AND CIRCUIT BREAKERS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Fusible switches. 2. Nonfusible switches. 3. Receptacle switches. 4. Shunt trip switches. 5.
More information320A Single Phase URD Meter Loop Installations
320A Single Phase URD Meter Loop Installations Location: The meter loop shall be mounted on the side of the pedestal facing the consumer's lot. (The side being one of the four flat surfaces of the pedestal
More information5.2. Power Pedestals. Contents Description
.2 Power Outlet Panels Contents Description Product Overview......................... Application Description.................. Features and Benefits................... Standards and Certifications..............
More informationP-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
P-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant Applications Protection and control of electrical equipment and circuits
More informationDesign Build Deliver. Metal Enclosed Switchgear, 5-35kV 1200 A Maximum Loadbreak, 4000 A Maximum Non-Loadbreak
Metal Enclosed Switchgear, 5-35kV 1200 A Maximum Loadbreak, 4000 A Maximum Non-Loadbreak Powergrid Solution s Metal Enclosed Switchgear has many different customizable options and configurations. Customers
More informationClass 320 Metering. Class 320 Metering. Meter Mounting Equipment
Single Meter Sockets, Without ypass -............................ 57-58 Meter Mains, With Optional MCC ypass -......................... 59-60 Meter Main Load Centers, With Optional MCC ypass -..........
More informationUNDERGROUND SERVICES - SECONDARY
UNDERGROUND SERVICES - SECONDARY Contents - Underground Services... U-1 General Requirements for Underground Service...U-2 Names of Parts for Underground Service... U-3 Service Termination in a Service
More informationSECTION 500 METERING AND ASSOCIATED EQUIPMENT
SECTION 500 METERING AND ASSOCIATED EQUIPMENT 500.0 General Meter sockets shall be provided, installed and maintained by Customer. When the ratings of meter sockets are exceeded, transockets shall be used.
More informationMP Meter-Pak Meter Centers Product Description PRODUCT DESCRIPTION. MP Meter-Pak Meter Centers
Product Description PRODUCT DESCRIPTION MPH66125 with Horn Bypass Square D brand MP Meter-Pak meter centers from Schneider Electric offer a wide range of solutions for multi-metering applications: UL Listed
More information6.1. Low Voltage Busway. Low Voltage Busway Pow-R-Way and 100V. Features, Benefits and Functions
.1 Features, Benefits and Functions Pow-R-Way III Offers a Full Line of to Meet the Needs of the Global Marketplace Eaton Corporation has combined the requirements of NEMA, UL, CSA and IEC into one design
More information10. METERING General Requirements
10. METERING 10.1 General Requirements A. The Company will not supply service to a Customer whose wiring is designed for resale of electricity through submetering except for recreational campgrounds, marinas,
More informationMP Meter-Pak Meter Centers Product Description PRODUCT DESCRIPTION. MP Meter-Pak Meter Centers
Product Description PRODUCT DESCRIPTION MPH66125 with Horn Bypass Square D brand MP Meter-Pak meter centers from Schneider Electric offer a wide range of solutions for multi-metering applications: UL Listed
More informationMeter Mounting Equipment Wisconsin Area
Meter Mounting Equipment Wisconsin Area MILBANK OVERVIEW MILBANK OVERVIEW Charles A. Milbank 879-9 Bill Martin 9-998 Robert F. Waldrop 9-00 Robert F. Waldrop, II Chairman Katrina Waldrop Henke Vice Chairman
More informationDivision 1 Explosionproof Panelboards
Division 1 Explosionproof Panelboards Designed for use in Class 1, Division 1 Zone 1 areas such as petroleum refineries, chemical or petrochemical facilities, the X1Pb panelboards are used to control lighting
More informationPanelboards and Lighting Control. Types PRL1a, 2a, 3a, 3E, 4 and Column Modifications. Contents Description
.5 Types PRL1a, 2a, a, E, 4 and Column Modifications s Types PRL1a, 2a, a, E, 4, Column Modifications Selection Guide Modifications Alphabetical Index Modification Item Contents Types PRL1a, 2a, a, E,
More informationfastfax Rock Solid TM Load Centers General Information
General Information FEATURES UL Listed. Straight-in wired, bolt-on main breaker for 100-225 amps. Neutral and ground bars have multiple 1/0 conductor terminals. Factory installed ground bars on all devices.
More informationUNDERGROUND SERVICE ENTRANCE LOCATION. No meter base or entrance should be installed before an KREMC engineer has checked the proposed location.
UNDERGROUND SERVICE No meter base or entrance should be installed before an KREMC engineer has checked the proposed location. Entrance cabinet must be directly through wall or directly under meter in basement.
More informationSERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING
SERVICE ATTACHMENT ON A BUILDING WITH BUS DUCT SERVICE ENTRANCE AND INDOOR METERING Obtain acceptance and specific details from the local Company office. 1. Service entrance duct (see Note 1). Company
More informationInstrument Rated Metering Equipment
Instrument Rated Metering Equipment Milbank Manufacturing 480 Deramus Ave., Kansas City, MO 6420 877.48.54 milbankworks.com 2 MILBANK OVERVIEW Milbank Overview Energy At Work since 927 Milbank builds solutions
More informationFACTORY SEALED CIRCUIT BREAKER PANELBOARDS
FACTORY SEALED CIRCUIT BREAKER BOARDS Applications Hazardous areas due to the potential of explosive gas atmospheres, combustible dusts or easily ignited fibers or flyings and areas subjected to corrosive
More informationA. Work Included: Provide low voltage switchboard work as shown, scheduled, indicated, and as specified.
SECTION 26 24 13 LOW VOLTAGE SWITCHBOARDS PART 1 - GENERAL 1.1 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Divisions 0 and 1 and Section 26 00 01, Electrical General
More informationApproved Contractor Construction e-guide Residential Commercial
Approved Contractor Construction e-guide Residential Commercial Clark Public Utilities PO Box 8900 Vancouver, WA 98668 (PAGE 2) TABLE OF CONTENTS PAGE Trenching 3 Wire 8 Single-Phase Transformer Set 13
More informationX1PB: Explosionproof Panelboards
X1PB: Explosionproof FEATURES Spring-loaded through the door circuit breaker handles for 1P, 2P, and 3P breakers Padlock provision for breaker handles Copper bus bars Aluminum hinge with stainless steel
More informationAccessories. Accessories. Meter Mounting Equipment
Covers & Sealing Rings..................................................................... 119 AW & H-Base Hubs.......................................................................... 119 Flush Trim
More informationIntroduction. Upon completion of Basics of Meter Mounting Equipment
Table of Contents Introduction...2 Power Distribution...4 Single-Position and Gang Meter Sockets...9 Meter Combos...27 Overcurrent Protection Device Ratings...38 Uni-Pak Metering...41 Power Mod Modular
More informationApproved Meter Sockets and Cabinets
Single Unit Residential Guide 1 PHASE, 120/240 VOLT SERVICES SERVICE CAPACITY OWNED METERING (Metering sockets and cabinets are supplied by Customer). Outdoor meter mounting height is 1730 mm ( 5 8 ) to
More informationModular Metering Application Guide
GE Energy Connections Modular Metering Application Guide Mini Mod* III Product Family Table of Contents Page No. Nomenclature 3 Mini Mod III Photos 4 Mini Mod III Ring -Type and Ringless 5 Mini Mod III
More informationME Switchgear with Vacuum Circuit Breaker and Auto-jet II Switch with Ground Position
LET S BE PACIFIC November 0 Volume Number 5 ME Switchgear with Vacuum Circuit Breaker and Auto-jet II Switch with Ground Position Federal Pacific has the capability to engineer, fabricate and assemble
More information5.11. Metering Products. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
.11 Metering Products Systems for Residential and Commercial Application Systems for Residential and Commercial Applications Product Description Group metering is a service entrance product line that consists
More informationContents. Power Outlet. Don t Give Up! If you don t find the product you want in this catalog, try the Flex Center at
-1 Power Outlet Panels Contents Description Page Surface Units................................................... -3 Pedestal Units.................................................. -3...............................................
More informationComEd Service Area Meter Mounting Equipment
ComEd Service Area Meter Mounting Equipment Milbank Manufacturing 480 Deramus Ave., Kansas City, MO 640 877.48.54 milbankworks.com MILBANK OVERVIEW Milbank Overview Energy At Work since 97 Milbank designs
More information6.2. Power Pedestals. Contents
Power Pedestals.2 Power Outlet Panels Contents Description Page Product Overview................................. 287 Application Description.......................... 288 Features and Benefits...........................
More informationDISCONNECT SWITCH REQUIREMENTS FOR DISTRIBUTED GENERATION CUSTOMERS
Prepared by: SXZO DISCONNECT SWITCH REQUIREENTS FOR DISTRIBUTED GENERATION CUSTOERS 060559 Department: Electric Distribution Section: Design and Construction Approved by: D.Jantz (DWJ7) Date: 8/15/17 Rev.
More informationPanelboard Renewal Parts Supplement
Panelboard Renewal Parts Supplement Contents Page Page Contents Page PRL 1a and a Neutral Assemblies..................................................... 3 PRL 1a and a Ground Assemblies.......................................................
More informationBulletin 1494V Variable Depth Flange-Mounted Disconnect Switches. Bulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches
2 Bulletin 1494 NEMA Disconnect Switches Section Overview Bulletin 1494V Variable Depth Flange-Mounted Disconnect Switches Open Type, Fusible 30 600 A Open Type, Non-Fusible 30 600 A Page 2-3 Bulletin
More informationSERVICE ENTRANCE - UNDERGROUND Single & Three Phase 200, & 320/400 Amp
Printed from NIPSCO.com 04-01-17 PAGE 1 OF 6 USE: Arrangement of service equipment to supply electric energy to an underground, outdoor self contained meter installation. LATEST REVISION: PREVIOUS REVISION
More informationService Entrance Methods
Service Section Typical switchboards consist of a service section, also referred to as the main section, and one or more distribution sections. The service section can be fed directly from the utility
More informationGE 8000-Line Motor Control Centers
GE 8000-Line -1 ENCLOSURE TYPES TYPE 1 General Purpose, Indoor Intended for use indoors, primarily to prevent accidental contact of personnel with the enclosed equipment, in areas where unusual service
More informationPANELBOARDS SECTION 1
SECTION 1 P1 PANELBOARDS Description Page General Information 1-2 Selection and Application 1-2 Application 1-3 1-6 Main Breaker Panel Size Selector 1-3 Main Breaker Selection 1-3 Main Lugs Size Selector
More information1 OF 8 LAD LAD PROJECT AREA KIMBERLY GERBER TITLE SHEET C.E.S. DWG. NO. NPN12045 SHEET INDEX
LAD05-9, CA 964 TITLE SHEET LAD05-9 SHEET INDEX 00 DEXTER AVE. SUITE 50 SEATTLE, WA 9809 PROJECT SUMMARY PROJECT DESCRIPTION COORDINATES LATITUDE: 33.678084 N LONGITUDE: -7.84858 W 0640 Sepulveda Blvd.
More informationModel 6 Motor Control Centers Catalog 8998CT9701R07/ Class 8998
Catalog 8998CT9701R07/09 2009 Class 8998 CONTENTS Description............................................. Page Product Description.......................................... 7............................
More informationPower Mod. Introduction.
Power Mod Siemens is proud to introduce Power Mod with QuickSystem - a new robust and featurerich line of modular metering designed with the contractor in mind. Power Mod features a unique combination
More informationBulletin 1494F Fixed-Depth Flange-Mounted Disconnect Switches. Selection Guide
F Fixed-Depth Flange-Mounted Disconnect Switches Selection Guide F Fixed-Depth Flange-Mounted Disconnect Switches Product Cat. No. 1494F-N Disconnect Switch with Cat. No. 1494F-F Fuse Block Adapter Plate
More informationProduct Specification Sheet #3LD2.1
Product Specification Sheet #3LD2.1 Enclosed Non-Fusible Rotary Disconnect Switch 16 30 Amp, Type 12K Industrial and Type 4X Non-Metallic Enclosures General Information and Horsepower Ratings Shipping
More informationMeter Installation. -and- Padmount Transformer Guide
Meter Installation -and- Padmount Transformer Guide Feb. 2016 METERING REQUIREMENTS The following information shall be used as a guide for installing metering equipment. A self-contained meter has all
More informationFor Options, Modifications and Accessories, see pages Discount Schedule A6
Main and Feeder Units Bulletin 191F and 191M Outgoing Feeder Lug Compartment (FLUG) and Incoming Main Lug Compartment (MLUG)................................................. The Bulletin 191M and 191F
More information