NITTO MFG. WORKS. Thank you very much for your special interest with NITTO MFG. WORKS Wankel Rotary Engines and for your definite inquiry this time.

Transcription

1 Dear Distinguished Customers, Thank you very much for your special interest with NITTO MFG. WORKS Wankel Rotary Engines and for your definite inquiry this time. NITTO MFG. WORKS have designed, manufactured to materialize the orthodox Legitimate Rotary Engines. We have adopted SIDE Seal, CORNER Seal and APEX Seal (2-split type) and built in our Wankel Rotary Engines, in order to follow well the original Dr. Wankel s Theory. Parts for NRG-20EH Details the Rotor section a Details b APEX 2-split NITTO MFG. WORKS have been manufacturing our Wankel Rotary Engines with the method of Machining-Out All as one of our accumulated the higher accurate machining processes. That is the reason why our, NITTO MFG. WORKS Wankel Rotary Engines have been loved and enjoyed very well by our various customers for long years, in view of adequately-considered their durability as the engines suitable for practical use for our customers. Please also refer to our web-site for the componentry list and enjoy our Nitto Rotary engine Specifications. We, NITTO MFG. WORKS have taken pride in our technique to sophisticatedly manufacture 20cc small size Wankel Rotary Engines to this extent. We have never heard and seen so far the same level of Wankel Rotary Engines manufactured in all over the world. All our customers have recognized the higher our quality after actually using them

2 Please place order immediately with us so that you can share and have the same experience by yourselves to enjoy the beauty and magnificence or loveliness of our full-fledged Wankel Rotary Engines. NITTO MFG. WORKS are always ready to serve for you. Kindly review again our web-site to make sure your understanding for our engines as one of your discussion materials, although you have already read through them, in addition to our data this time together. Now, please be advised on our NITTO MFG. WORKS sales system at first. All our customers have been enjoyed by our direct marketing method, and therefore we have not established any distributor or sales agent at all. Please do not hesitate to place order directly to NITTO MFG. WORKS as soon as you make up your mind to select our models, so that you can get our engines shipment directly from us soon. Kindly let us explain the procedure of shipment flow after receiving your orders for our Wankel Rotary Engines. (1) Please select the type and name of our engine models. NITTO MFG. WORKS will give you our quotations as soon as your required Types of the Engine Model and Name are selected. Please also select together the optional parts than the engines, if any. ( The related products and optional items are introduced in Pages 7 through and please feel free to ask any questions with us.) (2) Please tell us the selected items and required quntities. In order to prepare our quotations, please tell us your selected items ( Types of the Engine Model and Name / The related products and optional items ) and quantities, together with your postal address and telephone number for our calculation of the shipping charges. (In case the required delivery point is different than the above, kindly specify the postal address and telephone number without fail.) (3) Our Quotation sheet will be arranged for you by our . e You will be soon advised our Quotation details, consisting with the commodities amount and the shipping charges added

3 You can find in the sheet our Bank Account # for your T.T. Remittance. (4) Please read through our Quotation sheet and discuss it. Please study whether you place your order with us on the basis of our Quotation sheet. Please proceed to (5) hereunder after making your decision. (5) Please make your remittance to the designated bank. Kindly make your remittance of the same amount described in our Quotation sheet after discussing and making your decision to purchase from us. Please make sure our Bank Account #, in Japanese Yen in the form of T.T. Remittance, in full, in advance without fail, subject to all the banking charges are for your account. Please advise us by the reference # of your remittance so that we can immediately follow up. It will take several days for us to reconfirm the above, even by Telegraphic Transfer. NITTO MFG. WORKS shall take action for your purchase upon reconfirmation of your T.T. Remittance at the designated Bank. We will let you know our reconfirmation of the above by our . (6) Shipment of the required commodities from NITTO MFG. WORKS NITTO MFG. WORKS have been carrying our engines in the form of the parts, and therefore it will take about one (1) month after reconfirmation of your order, to assemble, pack and ship for your designated addrress. NITTO MFG. WORKS will advise you the definite shipping schedule after reconfirmation of your order, and let you know by when we have shipped out. (7) You can get our shipment. All the above are the full story of your purchase and receipt of our shipment to you

4 Please let us explain our Wankel Rotary Engines made by NITTO MFG. WORKS. We have been presently marketing our Rotary Engines with the displacement of 20cc, 2-types cosnsisting of Glow fuel and Gasoline fuel specifications and for Airplane and Helicopter uses respectively. Please choose your requirements from these 2 types and 4 models undermentioned accordingly, and tell us Types of the Engine Model Name and Quantity matched with your own application purposes. In the course of your actual selection by refering the points undermentioned, please be advised to make up your mind to select always Glow fuel type NR NR-20EP 20EP or NR NR-20EH 20EH, as far as you want to experience the powerfulness or to require the high power of Rotary Engine. On the other hand, NITTO MFG. WORKS would like to suggest you to choose Gasoline fuel type NRG NRG-20EP 20EP or NRG NRG-20EH 20EH,, when you do not require the high power but you want to minimize the volume of smoke in the displacement (No smoke) s as well as to keep the running fuel cost at the cheaper level. Please also tell us at the same time as far as you want to have together any items from The related products and optional items (which are necessary to use our engines and can be shipped out from us), so that we can prepare our Quotations in time for you. The types, data and prices of NITTO MFG. WORKS Wankel Rotary Engines. (1) NR NR-20EP 20EP (Glow (Alcohol) fuel type for airplane with the 20cc displacement) - 4 -

5 The main body 118,000.- (excluding Glow plug and muffler) Weight 1,466 g (including the mount) Displacement 19.75cc Fuel Glow (Alcohol) Practical use revolutions 2,000 10,000 rpm Horse Power Approximately 3 HP Screw at Displacement M14 x P0.75 Propeller APC 16 x 10 (please understand as the indication) Max. revolutions abt. 8,600 rpm (based on the above propeller when used) Fuel consumption about 5 minutes / 500cc (continuous running at full-bore) Plug Glow Plug No.3 made by ENYA (not attached but recommendable) (2) NR NR-20EH 20EH (Glow (Alcohol) fuel type for helicopter with the 20cc displacement) The main body 118,000.- (excluding Glow plug and muffler) Weight 1,493 g (including the mount & cooling fan) Displacement 19.75cc Fuel Glow (Alcohol) Practical use revolutions 2,000 13,000 rpm Horse Power Approximately 3 HP Screw at Displacement M14 x P0.75 Fuel consumption about 13 minutes / 500cc (continuous hovering flight with no load) Plug Glow Plug No.3 made by ENYA (not attached but recommendable) All-up weight Acceptable up to abt. 15kg (please understand as the power indication only and never try to fly with heavy load

6 We cannot make any guarantee of the endurability for the engine and the safety etc. of the main body of the helicopter.) ( 3) NRG NRG-20EP 20EP (Gasoline fuel type for airplane with 20cc displacement) The main body 168,000.- (excluding muffler) (including the ignition system (AMP type/full automatic spark advance) and spark plug) Weight 1,800 g (including the mount) Displacement 19.75cc Fuel Gasoline Practical use revolutions 2,000 10,000 rpm Horse Power Approximately 1.8 HP Propeller APC 16 x 8 (please understand as the indication) Max. revolutions about 8,000 rpm (based on the above propeller when used) Fuel consumption about 10 minutes / 500cc (continuous running at full-bore) Plug Spark Plug CMR6H made by NGK ( 1 piece included) - 6 -

7 (4) NRG NRG-20EH 20EH (Gasoline fuel type for helicopter with 20cc displacement) The main body 168,000.- (excluding muffler) (including the ignition system (AMP type/full automatic spark advance) and spark plug) Weight 1,800 g (including the mount & cooling fan) Displacement 19.75cc Fuel Gasoline Practical use revolutions 2,000 11,000 rpm Horse Power Approximately 1.8 HP Fuel consumption about 25 minutes / 500cc (continuous hovering flight with no load) Plug Spark Plug CMR6H made by NGK ( 1 piece included) All-up weight Acceptable up to abt. 9kg (please understand as the power indication only and never try to fly with heavy load. We cannot make any guarantee of the endurability for the engine and the safety etc. of the main body of the helicopter.) All the above are our explanation for our 4 models. Please feel free to ask any question. We are anxiously waiting and expecting to have your orders by return

8 Let us introduce The related products and optional items for our engines, and tell us the products name and quantities, if you want to have, together with the engines. (1) Lower frame set for Voyager GS (R) made by To change NR-20EH or NRG-20EH for Voyager GS (R) Helicopter made by JR (2) Lower frame set for Z230 ( R ) made by To change NR-20EH or NRG-20EH for Z230 (R) Helicopter made by JR - 8 -

9 (3) Silencer #208 made by HATTORI NITTO MFG. WORKS for NR-20EH, (4) Silencer #208 to stay for for NR-20EH, NRG-20EH Example to stay (5) Header for for NRG-20EH (Can be directly set to the Engine) - 9 -

10 (6) Header #209 made by HATTORI NITTO MFG. for NR-20EH (The screw size is different, please use the undermentioned.) (7) Screw for Displacement Change (M13 x M14) for NR-20EH (It is necessary to fix the above -

11 (8) Silencer made by OS for (FS-120Ⅲ) with nipple made by NITTO MFG. for NR-20EP (Please use the undermentioned (9) for NRG-20EP.) (9) Silencer made by OS for (FS-120Ⅲ) with no for NRG-20EP (Please use with nipple abovementioned for NR-20EP.) (10) Header made by NITTO MFG. WORKS for NRG-20EP (M14 x -

12 for NRG-20EP (To fix Silencer the bovementioned (4) Silencer made by OS) (11) Glow Plug No.3 made by ENYA for NR-20EP, This GLOW PLUG is not included to the engines. (12) Spark Plug (CMR6H) made by NGK for NRG-20EP, The one piece of this SPARK PLUG is included to the Engine

13 (13) Spinner made by NITTO MFG. for NR-20EP, NRG-20EP Example of how to fix the spinner (14) Spinner made of Aluminum for NR-20EP, NRG-20EP

14 (15) Nut for Spinner (M8 x M4) NITTO MFG. for NR-20EP, NRG-20EP It is necessary to fix the Spinner abovementioned (14). All of the above are our introduction of The related products and optional items with our Engines. Please discuss and select the necessary Wankel Rotary Engines and of The related products and optional items. Upon receipt of the details of the above, NITTO MFG. WORKS are pleased to mail our Quotation Sheet, including the shipping charges to you. We do hope you can enjoy in advance by visiting our web-sites for the Actual flight images. At first, click then for English then for Enjoy the actual flight images With our best regards, NITTO MFG. WORKS YUZO SARATANI President , Wakae-Higashimachi, Higashiosaka City Osaka Japan Tel : Fax : Web-site : nitto@nitto-mfg.com