Address (Seoul Office) ::: Rm.#408, ACE Techno Twin Tower 6,212-1 Kuro-dong,Kuro-ku, SEOUL, KOREA Tel : (82) ~2 F ax (82)
|
|
- Myron Norton
- 6 years ago
- Views:
Transcription
1 TECH Address (Seoul Office) ::: Rm.#408, ACE Techno Twin Tower 6,212-1 Kuro-dong,Kuro-ku, SEOUL, KOREA Tel : (82) ~2 F ax (82) Address (Head Office &Shop) Songsanri, Wookang-myeon,Dangjin- gun Chungnam, , KOREA Tel : (82) ~3 Fax : (82)
2 Contents
3 1.Brief Company History Established Jesung Engineering Co., Ltd Established J TECH Co., Ltd Acquired the Certificate of ISO 9001 Quality Management system Acquired the Certificate of Specific Facilities License Acquired the Certificate of ASME U & S Stamps.
4 2.Company Profile Company Name J TECH CO.,LTD Registration NO President Jeong-Yun,Kim Business Status Representative Director Address (Seoul Office) Rm.#408, ACE Techno Twin Tower 6,212-1 Kuro-dong,Kuro-ku, SEOUL, KOREA Address (Head Office & Shop) Songsanri, Wookang-myeon,Dangjin- gun Chungnam, , KOREA jtkr@jtkr.com Capital Status 880,000,000 Plant Area Plant Site Area : 31,200m2 Indoor Shop 1 ST Bay : 20 m X 75 m 2 nd Bay : 20 m X 72 m Store House : 9 m X 24 m Outdoor Shop : 20 m X 72 m
5 3. Business Activities 1. Engineering Services A. System Engineering Evaporation System Distillation System Ion-exchanging System Equipment Engineering Pressure Vessel & Heat Exchanger B. Equipment Engineering Pressure Vessel & Heat Exchanger Reactor Tower & Column Storage Tank(Cone Roof Tank, Floating Roof Tank) C. Piping Engineering D. Electric & instrument Engineering E. Control System Engineering(PLC&DCS) 2. Fabrication Services Reactor Pressure Vessel Tower & Column Storage Tank Silo Fired Heater 3. Construction Services Piping Equipment Erection 4. Test Operation
6 4. Organization 4-1. Organization Chart 4-2. Man Power State
7 4-1. Organization Chart President Plant Div. Managing Director Design & Engineering Dept. Sales Dept. Fabrication Dept. Procurement Dept. Quality Control Dept. Manager Manager Manager Manager Manager Design & Engineering Team. Sales Team. Fabrication Team. Procurement Team. Quality Control Team. Engineer Engineer Engineer Engineer Engineer
8 4-2 Man-Power State 1. Engineering & Admistration Employment Compartment Senior Middle Junior Total Mechanic Quality Safety 1 1 Total Skilled Manpower Capacity Compartment Foreman Skilled Worker Total Plant Pipe Fitter Plant Welder Total
9 5.Major Facilities 5-1 Fabricating Equipment & Tool List 5-2 Test & Inspection Equipment List 9
10 5-1 Fabricating Equipment & Tool List Fabrication Equipment & Tool List No. Name Spec. Maker Model Year Remark 1 Turnery φ480 / 1350L SOON-H SHPL Radial Drilling Machine Drilling 50mm WONWOO Radial Drilling Machine Drilling 95mm Tapping 80mm BONGSIN KMB-U Table Drilling Machine Drilling 23mm SAMCHUNRY STD Magnetic Drilling Machine Drilling φ3 ~ 23 Yongsoo YSMD-2H Magnetic Drilling Machine (Hydraulic Type) Drilling Max. φ35 Yongsoo ME Milling Machine L1700 x W470 KH KMB-U Pipe Threading Machine ½ ~ 3 ROX 80A Bend Saw Machine Φ590 / 640 x 590 KumKwang KHA Bend Saw Machine 11 Pipe Cutting Machine (GF Cutter) 12 Diameter Pounds Rectangle 90 : 12 x 20 Rectangle 45 : 12 x 12 SAWTECH BS-300SA /60Hz, u/min Plate Bending Roller 30t x 3200L Jung Won Plate Bending Roller 16t x 3000L Won Woo Hydraulic Torch Wrench Max. Torch : 3280ft.lbs Min. Torch : 480 ft.lbs HyTorch 3MXT Welding Rod Dry Oven 50kg Dawon ea 16 Crane 5ton KOBE CDHO ea 17 Crane 15ton KOBE CDHO ea 18 Crane 20ton KOBE LYS ea 19 Crane 10ton KOBE LYS-024-C ea 20 Gantry Crane 15ton KOBE LYS-025-C ea 21 Turning Roller 30ton DAGWANG sets 22 Turning Roller 10ton DAGWANG sets 23 SAW Manipulator Height 5000/Stroke SAW Welding Machine sets 25 GTAW Welding Machine sets 26 SMAW Welding Machine sets 27 FCAW Welding Machine sets 28 SAW Welding Machine 1000A sets 29 GOUGING MACHINE 1000A WOOJIN AIR PLASMA 150A L-TEC PCM sets 31 EXPANDING MACHINE 350/14.5 SUGINO TR-506H/TRC- 1022A JAPAN
11 5-2. TEST & Inspection Equipment List I.D NO Description Spec Model Q`ty Manufacturer Next Cal. Date Serial No. Pur. Date JT-UT-001 Ultrasonic Thickness Gauge 1.0 ~ mm TT Time grup inc JT-CT-001 Coating Thickness Gauge 0 ~ 1999 μm MG Elmetron 0932/ JT-DT-001 Digital Thermometer -40 ~ 500 C TX Yokogawa T1H JT-IT-001 Infrared Thermometer -50 ~ 1300 C MT-6 1 RAYTEK MAGR JT-RT-001 Surface Roughness Tester 0.05 ~ 10 μm TR HIOKI JT-SR-001 Surface Roughness Gauge BS-2 Flat 1set(2pcs) JapanMetal JT-SR-002 Surface Roughness Gauge Round 1 JapanMetal JT-HT-001 Hardness Tester IMAI JT-TT-001 Universal Tester 500 kn SMB-H50 1 SM JT-WT-001 Dead Weight Tester 0.5 ~ 100 kg / cm2 DPG-50 1 HISCO JT-CM-002 Clamp On Hi Tester 1000A/600V/42 MΩ HIOKI JT-CM-003 Digital Clamp On Hi Tester AC HIOKI JT-CM-004 Digital Clamp On Hi Tester AC & DC HIOKI JT-VC-001 Vernier Calipers 0~150 mm /0.05 mm - 1 Mitutoyo JT-MM-001 Micrometer 0 ~ 25 mm - 1 Mitutoyo JT-MM-002 Micrometer 25 ~ 50 mm - 1 Mitutoyo JT-MM-003 Micrometer 10 ~ 18 mm - 1 Mitutoyo JT-BG-001 Boregage 10 ~ 18 mm - 1 Mitutoyo JYB565/ JT-BG-002 Boregage 10 ~ 18.5 mm - 1 Mitutoyo - KHS257/ JT-BG-003 Boregage 18 ~ 35 mm - 1 Mitutoyo - KHS268/ JT-BG-004 Boregage 18 ~ 35 mm - 1 Mitutoyo - JSM557/ JT-DI-01 Dial Indicator 0 ~ 1000 μm - 1 Mitutoyo - JSM JT-DI-02 Dial Indicator 0 ~ 1000 μm - 1 Mitutoyo - JYB
12 6. Licenses & Certificates 6-1.Business Registration Certificate 6-2.Specific Facilities License 6-3.Certificate of ISO Certificate of ASME U Stamp 6-5.Certificate of ASME S Stamp
13 6-1.Business Registration Certificate 14
14 6-2.Specific Facilities License
15 6-3.Certificate of ISO
16 6-4.Certificate of ASME U Stamp 16 17
17 6-5.Certificate of ASME S Stamp
18 7. Manufacturing Shop. Factory & Office (Plant Site Area : 14,850 m2 ) 19
19 7. Manufacturing Shop. Shop#1 & Inside (1st Bay : 20 m X 75 m) 20
20 7. Manufacturing Shop. Shop#2 & Inside (2nd Bay : 20 m X 72 m)
21 7. Manufacturing Shop. Yard ( 110 m X 130 m) Store House ( 9 m X 24 m)
22 8. Shop Lay-Out
23 9. Shop Location 24
24 10.1 Major Experience Pressure Vessel YEAR CUSTOMER PROJECT DESCRIPTION CAPACITY REMARKS 97.1 DAESANG CORPORATION. C-Project Column : 35 m3, Reactor : 20 m3 MEOH Distillation System : 5 m3 /hr 97.1 SAMYANG CHEMICAL Co.,Ltd. YANGSAN Project 97.6 HIGH TECH PHARM Co.,Ltd. H.T.P Plant Engineering, Piping Erection, Reactor : 3 m3, Storage Tank : 10 m3 Heat Exchanger : 10 m SAMWHA PAPER Co.,Ltd. PM1&2 Project DCS Program Reactor : 10 m3, Storage Tank : 50 m3 Vessel : 20 m CHONGKUNDANG Co.,Ltd. Ion-Engineering System DAEDOO FOOD S Co.,Ltd. DFG- 96 Project 99.7 SONGKANG IND Co.,Ltd. SK Ⅱ Project 99.9 CHONGKUNDANG Co.,Ltd. KD-376L Project CHONGKUNDANG Co.,Ltd. Ion-Engineering System PLC system PLC system Column : 30 m3, Tank : 150 m3, Vessel : 30 m3 Fermenter : 30 m3, Cooker : 5 m3, Mixer : 10 m3 Vessel : 50 m3 IPA Distillation system : 5 m3 /hr, Reactor : 20 m3 Storage Tank : 100 m3, Heat Exchanger : 100 m3 Vessel : 30 m3 Fermenter : 150 m3, Reactor : 30 m3 Storage Tank : 200 m3,heat Exchanger : 50 m3 Vessel : 40 m3 Column : 30 m3, Storage, Tank : 150 m3 Vessel : 50 m SAMWHA PAPER Co.,Ltd. Dye Dosing System DCS Program Capacity : 1 m3 /hr
25 10.1 Major Experience Pressure Vessel YEAR CUSTOMER PROJECT DESCRIPTION CAPACITY REMARKS 00.4 SILKROAD CONSTRUCTION CHEMICAL Co.,Ltd. REMA-90 Project Reactor : 20m³, Storage Tank : 5m³ Heat Exchanger : 10m³, Vessel : 2m³ 00.6 CELL BIO TECH Co.,Ltd. Fermentation Plant Fermenter : 1m³, Storage Tank : 3m³ Heat Exchanger : 10m³ 00.8 CELL BIO TECH Co.,Ltd. Purified Water Project (R/O + EDI System) Capacity : 2 m3 /hr Storage Tank : 2m³ 01.2 HANKOOK PAPE Co.,Ltd. Chemical Dosing System Equipment, Piping, Electric Work Storage Tank : 10m³, Vessel : 5m³ 01.5 HAWIL PHARM Co.,Ltd. Purified Water System (R/O System) Engineering, Piping Column : 35 m DOOBON FINE CHEMICAL.Co.,Ltd Expansion Project Engineering, Equipment, Piping Civil Work, Arch Work Mixer : 5 m3, Dryer : 5 m3 Storage Tank : 10 m CHONG KUM DONG Co.,Ltd. Ion-exchanging System Erection, Column : 10 m3,, Storage Tank : 30 m3 Vessel : 20 m YONG KANG N.C Co.,Ltd. Mew Plant Engineering, Equipment, Piping Reactor : 10m³, Storage Tank : 30m3 Vessel : 15m JANG WOO MACHINERY Co.,Ltd. NaOH Evaporation Equipment, Piping Capacity : 10 m3 /hr 02.3 KUMKANG KOREA CHEMICAL Co.,Ltd. Resin Storage Tank EQ.Fab. Installation Tank : 50 m HIGH TECH PHARM Co.,Ltd. Reaction System Equipment, Piping Reactor : 3 m3. Storage Tank : 10 m3 Vessel : 3 m BASF COMPANY. AMS Feeding System EQ.Fab KUMKANG KOREA CHEMICAL Co.,Ltd Weighing Dropping System EQ.Fab., Installation Reactor : 5 m3, Storage Tank : 30 m3 Vessel : 10 m3
26 10.1 Major Experience Pressure Vessel YEAR CUSTOMER PROJECT DESCRIPTION CAPACITY REMARKS 03.1 MEDI PURE. Co.,Ltd. Purified Water System (R/O + EDI System) EQ.Fab., Instrument Work Capacity : 3 m3 /hr 03.1 CELL BIO TECH Co.,Ltd. Fermentation EQ.Fab., Installation Fermenter : 1 m CHONG KUM DANG BIO Co.,Ltd. Evaporation System EQ.Fab., Piping Capacity : 10 m3 /hr 03.4 KUMKANG KOREA CHEMICAL Co.,Ltd. Mixing System EQ.Fab. Installation Reactor : 10 m3 Vessel : 20 m KUMKANG KOREA CHEMICAL Co.,Ltd. Dropping System EQ.Fab., Installation Reactor : 5 m3, Storage Tank : 20 m HIGH TECH PHARM Co.,Ltd. Thinning System EQ.Fab., Piping Reactor : 2 m3, Heat Exchanger : 20m³ Vessel : 10 m BASF COMPANY Co.,Ltd. Lysine EQ.Fab. Fermenter : 250 m HIGH TECH PHARM Co.,Ltd. Ion Exchanging System Equipment, Piping Column : 3 m3, Storage Tank : 3 m3 Vessel : 3 m SHIN MOORIM MFG Co.,Ltd. PM2 Drainage System 03.9 HIGH TECH PHARM Co.,Ltd. Refrigerating System EQ.Fab., Piping EQ.Fab., Piping Storage Tank : 30 m3, Vessel : 20 m3 Reactor : 3 m3, Vessel : 5 m KUMKANG KOREA CHEMICAL Co.,Ltd. PCM Vessel EQ.Fab., Installation Vessel : 50 m CHONG KUM DANG BIO Co.,Ltd. E.A Evaporating System (Distillation System) EQ.Fab., Piping Capacity : 15 m3 /hr 04.2 BASF COMPANY. Lysine EQ.Fab., Installation Fermenter : 250 m3
27 10.1 Major Experience Pressure Vessel YEAR CUSTOMER PROJECT DESCRIPTION CAPACITY REMARKS 04.4 BASF COMPANY. Lysine EQ.Fab. Storage Tank : 1000 m3, Vessel : 300 m HIGH TECH PHARM Co.,Ltd. Expansion Plant Piping, Electric Work 04.5 HIGH TECH PHARM Co.,Ltd. Expansion Plant EQ.Fab.Piping,Installation Vessel : 3 m DONGKUM PHARM Co.,Ltd. Ion Exchanging System Column : 5 m3, Storage Tank : 30 m3 Vessel : 10 m KUMKANG KOREA CHEMICAL Co.,Ltd. Plant EQ.Fab., Piping Reactor : 5 m3, Vessel : 30 m SHIN MOORIM MFG Co.,Ltd. PM1 System EQ.Fab., Piping Storage Tank : 50 m3, Vessel : 20 m KUMKANG KOREA CHEMICAL Co.,Ltd. Resin EQ.Fab., Instrument Work Piping Reactor : 15 m3, Vessel : 30 m KUMKANG KOREA CHEMICAL Co.,Ltd. Plant Piping Reactor : Ø1770x2000Lx15T, STS CHONG KUM DANG BIO Co.,Ltd. N/F System Storage Tank : 150 m3, Vessel : 50 m MUSASHINO (JAPAN) Co.,Ltd. EQ.Fab. Reactor : 5 m SHIN MOORIM Co.,Ltd. PM1 System H.A.V.C 05.7 KOSEM Co.,Ltd. Piping 05.9 YUHAN Co.,Ltd. Sugar & Sorbitol System Storage Tank : 2550x 기 2150x 기 STS304
28 10.1 Major Experience Pressure Vessel YEAR CUSTOMER PROJECT DESCRIPTION CAPACITY REMARKS KUM KANG KOREA CHEMICAL Co.,Ltd. Plant EQ.Fab. Reactor : 10 m3, Vessel : 20 m BASF COMPANY. YEO CHEON Plant EQ.Fab. Reactor : 5 m3, Vessel : 20 m HIGH TECH PHARM. HTP-2K06 CIVIL & ARCH. Work, EQ.Fab. Piping, H.A.V.C Reactor : 5 m3, Vessel : 30 m3 Heat Exchanger : 40m³ Storage Tank : 50 m BASF COMPANY. Pilot plant Equipment Fab CHONG KUM DANG BIO Co.,Ltd. EA Distillation System Capacity : 15 m3 /hr BASF COMPANY. BFR Storage Tank Engineering, EQ.Fab Tank : Ø3800x4896Lx5T, STS FASS CANADA Co.,Ltd. Dryer Equipment Fab Capacity : 3 m3 /hr BASF COMPANY. Tank Equipment Fab Storage Tank : 1000 m DAESANG CORPORATION. Ir/Gr Evaporator System Capacity : 10 m3 /hr Indonesia DAESANG CORPORATION. Tide & Ml Evaporator System Capacity : 16 m3 /hr 06.8 CHONG KUM DANG BIO Co.,Ltd. N/F System CHONG KUN DANG BIO Co.,Ltd. Ceramic Filter System CHONG KUM DANG BIO Co.,Ltd. EA Distillation System Engineering Vessel : 30 m3, Storage Tank : 100 m3 Capacity : 10 m3 /hr CHONG KUN DANG BIO CO., LTD. Ceramic Filter System Engineering
29 10.1 Major Experience Pressure Vessel YEAR CUSTOMER PROJECT DESCRIPTION CAPACITY REMARKS KCC CORPORATION. RH-03 Tank Equipment Fab. & Piping Storage Tank : 20 m HIGH TECH PHARM Co.,Ltd. HTP-2K06 Plant Reactor : 5 m3, Vessel : 60 m KCC CORPORATION. Ced Equipment Fab. & Piping Reactor : Ø2320x2400Lx10T A KCC CORPORATION. Paint Equipment Fab. & Piping Reactor : 10 m KCC CORPORATION. RH-09, TH-09 Equipment Fab. & Piping KCC CORPORATION. Resin Plant Equipment Fab. & Piping Reactor : Ø1900x2000Lx9T, A Vessel : Ø2300x2345Lx10T, A Reactor : Ø2300x2300Lx12T, A Tank : Ø4300x5072Lx8T, A JANG WOO MACHINERY Co.,Ltd.. Dryer Installation, EQ.Fab., Piping Indonesia KCC CORPORATION. Polyester Plant HIGH TECH PHARM Co.,Ltd. Htp-06 Plant Reactor : Ø2220x2300Lx18T, A Tank : Ø2900x3048Lx8T, A Reactor : 5 m3, Vessel : 10 m DONGKUK PHARM Co.,Ltd.. Resin Column System Reactor : Ø1400x2500Lx10T, A KCC CORPORATION. Resin Plant Equipment Fab. Tank : Ø2924x3100Lx12T, STS SINSUNG CAM OIL Co.,Ltd. Distillation Column Column : 800Ø x 28800lx8T SK CORPORATION. L Project Heater : Stack & Duct Stack : 2750Ø x 8372lx12T BASF COMPANY. Vitamin B2 Fermenter : Ø5800x7300Lx12T/15T, A240-S304
30 10.1 Major Experience Pressure Vessel YEAR CUSTOMER PROJECT DESCRIPTION CAPACITY REMARKS KCC CORPORATION. Paint Plant Tank : Ø2900x3100Lx12T, STS KOREA KUMHO PETROCHMICAL Co.,Ltd Distillation System Equipment Fab Column : Ø1000x19700Lx10T A KCC CORPORATION. Resin Plant Tank : Ø1790x2080Lx8T, STS KOREA KUMHO PETROCHMICAL Co.,Ltd Distillation System Equipment Fab. (30) Column : Ø400x13000lxSch40xA106-B(1) Ø400x13000lxSch40xA240TP KCC CORPORATION. Paint Plant Equipment Fab. (5/5) Reactor : Ø2200x2700Lx12.7T, STS KCC CORPORATION. OH-Polymer Plant Equipment Fab. (2/2) Polymer Tank : Ø3100x8025Lx6T, STS304 Steam Drum :Ø1600x5600Lx43T A KOREA KUMHO PETROCHMICAL Co.,Ltd AN & BD Recovery System of NBR LATEX Plant Equipment Fab. (4 sets) Column : A106-B (12 Sch.40 x 15600L) Column : A (12t x ID1000 x 17800L) Floating Hex. : A106-B (12 Sch.40 x 2585L) Drum : A (10t x ID1000 x 1500L) KOREA KUMHO PETROCHMICAL Co.,Ltd Solvent Revoery System of R- Line Recycle BD Equipment Fab Column : A L (8t x ID1000 x 19700L)
31 10.2 Major Experience Heater YEAR CUSTOMER PROJECT DESCRIPTION CAPACITY REMARKS SK Corporation. L Project Heater : Stack & Duct Stack : 2750Ø x 8372lx12T LOTTE DAESAN Petrochemical corp.. SM Revamping Project Heater : Radiant, Convection, Stack & Duct, Pressure part Radiant Coil : A297HPMod,A358 TP304H Inconel 800HT Convection Coil : SA312TP304H, SA335P SK ENERGY CORP. BTX Revamping Project Heater : Radiant & Convection casing Fab LOTTE DAESAN PETROCHMICAL CORP. SM Revamping Project Radiant Coil Revamping Convection Coil Revamping Equipment Fab. A297HPMod, Inconel 800HT SA312 TP 304H, SA335 P22 Steam Drum :Ø1670x5010Lx31T A ABU DHABI POLYMER COMPANY(BOROUGE)/ SAMSUNG ENGINEERING Olefins Convection Unit Heater : Radiant, Convection, Stack & Duct, Pressure part Coil: A335 P11(273.1 O.D x SCH40) A312TP304H(168.3 O.D x SCH40) 2008 Lavan Oil Refining Co. CDU & VDU Project Heater : Radiant, Convection, Stack & Duct, Pressure part Coil: A335 P9 (6 x Sch.40) A106-B (6 x Sch.40) 2008 NAMVARAN Esfahan Refinery Gasoline Production Plant Project HP Steam Drum 46t x ID2000 x 6000L (SA516-70N) ASME U Stamp 2008 CPC / Fu-Tai Gasoline HDS Heater Heater : Radiant, Convection, Stack & Duct, Pressure part Coil: A312 TP321 (6 x Sch.40) A106-B (8 x Sch.40) 30
32 10.3 Photo of Production Heater (Lotte Daesan Petrochemical Corporation / SM Project)
33 10.3 Photo of Production Stack (SK Corporation / L Project)
34 10.3 Photo of Production Stack (SK Corporation / L Project)
35 10.3 Photo of Production Convection Section (Lotte Daesan Petrochemical Corporation / SM Project)
36 10.3 Photo of Production Stack (Lotte Daesan Petrochemical Corporation / SM Project)
37 10.3 Photo of Production Stack (Lotte Daesan Petrochemical Corporation / SM Project)
38 10.3 Photo of Production Radiant Header / Inconel 800HT (Lotte Daesan Petrochemical Corporation / SM Project)
39 10.3 Photo of Production Radiant Wall (Abu Dhabi Polymer Company / Samsung Eng. / Borouge Project)
40 10.3 Photo of Production Convection Module (Abu Dhabi Polymer Company / Samsung Eng. / Borouge Project)
41 10.3 Photo of Production Radiant Coil / A335-P22 (SK Energy Corporation)
ATS CHEM EQUIPMENTS PVT. LTD.,
ATS CHEM EQUIPMENTS PVT. LTD., AN ISO 9001:2015 CERTIFIED COMPANY Unit 1, C 27, SIDCO Industrial Estate, Hosur 635 126, Tamil Nadu, India. Phone No: 04344 276731, Mail ID: atschem@gmail.com Unit II, 16
More information3. QUALITY MANAGEMENT SYSTEM 5. EXPERIENCE RECORDS 6. MAJOR EQUIPMENT LIST 7. LAYOUT OF MOKPO FACTORY
1. COMPANY PROFILE 2. ORGANIZATION 3. QUALITY MANAGEMENT SYSTEM 4. MAJOR CLIENT 5. EXPERIENCE RECORDS 6. MAJOR EQUIPMENT LIST 7. LAYOUT OF MOKPO FACTORY 1. Company Profile 1-1. Location
More informationCompany Introduction
Company Introduction 1. Greeting & introduction Our customer service support has evolved to supply the hydraulic valves of high pressure hydraulic cylinders to our customers and provide a wide range of
More informationThe Only World Best Company
Korea Mexico The Only World Best Company Introduction History Profile Main & Branch Organization Soft-ware Machinery Processing Mold Processing CAE Product & Certificate Samples by Mold Certificate & Patent
More informationPEER MARK ENGINEERING SDN. BHD.
PEER MARK ENGINEERING SDN. BHD. SPECIALIZE IN DESIGN AND MANUFACTURING OF PROCESS MODULES, HEAT TRANSFER EQUIPMENTS, PRESSURE VESSELS, PROCESS COLUMN & OTHER EQUIPMENTS FOR OIL & GAS, PETROCHEMICAL, POWER
More informationYONGKWANG FLEXIBLE IND. CO., LTD.
YONGKWANG FLEXIBLE IND. CO., LTD. Content 1. Company Introduction 2. Company History 3. General Information 4. Organization 5. HSE Performance Statistics 6. Quality Assurance 7. Certificates 8. Patents
More informationGeneral Welding & Fabricating, Inc. Industrial Div. Catalog
General Welding & Fabricating, Inc. Industrial Div. Catalog Machine Design Weldments Machine Repair Millwright/Rigging Custom Trailers Ultimate Fab. Jobs Established in 1989, General Welding & Fabrication,
More informationENGINEERING FOR EXCELLENCE
ENGINEERING FOR EXCELLENCE Design, Construction & Instalation of Pressure Vessel /Pressure Piping built According to ASME Boiler & Pressure Vessel Code Sec. VIII Div. 1 and ASME / ANSI B31.1 / B31.3 Storage
More informationCompany Profile.
Company Profile DHTech Corp. DHTech Corp. http://www.dhtechkorea.com E-mail : dhtech@dhtechkorea.com General Information Foundation : July 10, 1996 CEO : TaeGyu Han Headquarters : 38, Technosunhwan-ro
More informationAUTOMOTIVE MANUFACTURING
REDESIGNED MODULES FOR THE SECTOR OF AUTOMOTIVE MANUFACTURING UNDER MODULAR EMPLOYABLE SKILLS (MES) Redesigned in - 2014 By Government of India Directorate General of Employment & Training Ministry of
More informationProfile COPYRIGHT 2009~2011 DONGSIN EF ALL RIGHTS RESERVED.
Profile COPYRIGHT 2009~2011 DONGSIN EF ALL RIGHTS RESERVED. GREETING Welcome to DONGSIN EF DONGSIN EF was established in July 2009. We product and supply high quality METAL EXPANSION JOINT, FLEXIBLE HOSE
More informationHIMC Co., Ltd. Company Introduction Homepage:
HIMC Co., Ltd. Company Introduction www.himc.kr Homepage:www.himc.kr E-mail:himc@himc.kr 1 CEO greetings Thank you for your visiting our company. We, HIMC have manufactured our products for 25 years with
More informationTHONBURILOHA ENGINEERING COMPANY PROFILE
THONBURILOHA ENGINEERING COMPANY PROFILE ก 19. 30 ก ก ก. 10140. 02-4271471, 02-4275625, 02-4277757 FAX. 02-4277820 ก / ก ก ก. ก ก ก ก ก 42 ก ก ก ก ก ก ก 4 8 ก 20 ก ก ก ก ก ก Managing Director ก THONBURILOHA
More informationLarge Qty Of Pressure Vessel Manufacturing Equipment, Fork Lifts, Vehicles, Stock & Consumables
Stanref International Ltd, Pressure (Ends: 2018-04-24 14:00:00.0) Vessel Manufacturing Equipment.(Further lots to be added) Large Qty Of Pressure Vessel Manufacturing Equipment, Fork Lifts, Vehicles, Stock
More informationYULCHON, The Center of Dynamic Changes in the 21 st Century, Makes Dream Come True
YULCHON, The Center of Dynamic Changes in the 2 st Century, Makes Dream Come True . Introduction 2. History 3. Organization Chart 4. Summary 5. Manufacturing Process 6. Production Equipment 7. Inspection
More informationBiodiesel Plant 30 Million Gal/Year
Biodiesel Plant 30 Million Gal/Year Plant Capacity: 30 million gal/year (30,000,000 gal/year). The plant is large in size because it is built on gravity transfer basis, which saves energy resulting in
More informationYOUNGJIN Hi-Tech Introduction 3Q, 2017
YOUNGJIN Hi-Tech Introduction 3Q, 2017 1. Company Profile Company Name YOUNGJIN HI-TECH CO.,LTD Business Field Factory Automation for smartphone, semiconductor, LCD, HDD Electronic Components for Linear
More informationSUMJIN Environmental System Technology Co., Ltd. (2011)
Delivery Performance record (2011) Performance Contents 1) Export Project & Foreign nation Purchase(Domestic Establish) -. Japan : SES, Tsukishima Kankyo ENG., MHI Mechatronic -. Thailand : BST, BSTE with
More informationWOOSUNG INSULATION INDUSTRY
WS-201712 ISO 9001:2015 WOOSUNG INSULATION INDUSTRY 46028 132, MYEONGNYESANDAN 5-RO, JANGAN-EUP, GIJANG-KUN, BUSAN, KOREA TEL : +82 51 753-2772 FAX : +82 51 753-2771 HAMEPAGE : http://www.wsins.co.kr
More informationContents Group Introduction Company History Company Location Business Area Company Organization Manpower for Ulsan Factory
1 Contents 1 2 3 4 5 6 7 8 9 10 11 Group Introduction Company History Company Location Business Area Company Organization Manpower for Ulsan Factory Capacity for Ulsan Factory Certificates & Licensed Production
More informationSoode (J) Sdn. Bhd. Company Profile. Specialists Of Original-technology & DEvelopment
Soode (J) Sdn. Bhd. Company Profile Specialists Of Original-technology & DEvelopment Last update: 18 JULY 2018 Introduction Corporate Data Company Name Co. No Established Chairman Managing Director Executive
More information- Company Presentation - Nobember 2007
www.bosung.com - Company Presentation - Nobember 2007 1189-1, Choryang-3Dong, Dong-Ku, Pusan, Korea Tel. +82-51-466-0881, e-mail:master@bosung.com 0 Index 1. General Information of BOSUNG ENG. 2. About
More informationJ.N. ROBOTIC AUTOMATION PVT. LTD. Company Presentation
Deepak Sanwal J.N. ROBOTIC AUTOMATION PVT. LTD. Company Presentation JN ROBOTICS July 6, 2017 Slide 1 Company Introduction History & Milestones Constituted in the year 1998 Total employees: 60 approx.
More informationLeader of Heat Exchangers. Company Introduction. April, 2010 Plant Sales Division. March Homepage : LHE Co., Ltd.
Leader of Heat Exchangers Company Introduction April, 2010 Plant Sales Division 1 Agenda 1. Who`s LHE 2. What LHE Makes 3. Major Customers 4. References 2 Contents t 1. Who`s LHE - Company Location - Brief
More informationCONTENTS. DuraPlus. 10 Strands compacted semi-ip rope Container cranes, overhead cranes, floating cranes
CONTENTS DuraPlus DuraPlus DPC 8P 8 Strands compacted semi-ip rope container cranes, floating cranes, steel mill cranes, mobile cranes DuraPlus DPC 6P 6 Strands compacted semi-ip rope Container cranes,
More informationSTYLE J COMBINATION PRESSURE AND TEMPERATURE REGULATOR
STYLE J COMBINATION PRESSURE AND TEMPERATURE REGULATOR MIL-V-19772A and MIL-DTL-19772B TYPE IV SERIES 100 (BRONZE) and 150 (STEEL) SUITABLE FOR SHIPBOARD SERVICE TRAC Regulator Company Inc. 160 South Terrace
More informationAmruta Electronics Corporation
+91-8048603192 Amruta Electronics Corporation https://www.indiamart.com/amruta-electronics/ Our organization is known in the market for importing and trading an advanced range of Ultrasonic Detector &
More informationACO TM, The Advanced Catalytic Olefins Process
ACO TM, The Advanced Catalytic Olefins Process Michael Tallman Evolution of the Modern Car 18: Inventor Cugnot invents steam powered car 18 s Steam Powered Car 187 1 st Gasoline Powered Car Early 19s 187:
More informationAt a Glance. 1. Company s overview 2. Milestones 3. Policy 4. Organization
At a Glance 1. Company s overview 2. Milestones 3. Policy 4. Organization OVERVIEW established 2003.02.28 Address 37-17, Jenae1gongdan-gil, Oedong-eup, Gyeongju-si, Gyeongsangbuk-do, Korea CEO Kim Kwangtae
More informationChiba Marine Group. Japan - Korea - USA - Philippines. Your choice for your satisfaction
Japan - Korea - USA - Philippines Your choice for your satisfaction Chiba Marine Korea Co.,Ltd. Company profile: Chiba Marine Korea Co.,Ltd. was established 22 years ago as a repairing company in Korea.
More informationPETROLEUM WAX & VASELINE PLANT
PETROLEUM WAX & VASELINE PLANT Seoul, Korea Q_iso s Activities OPTIMUM SOLUTION PROJECT MANAGEMENT FRONT-END ENGINEERING PROCESS & MECHANICAL ENGINEERING INSTALLATION & CONSTRUCTION OPERATION & MAINTENANCE
More informationAIROIL FLAREGAS Private Limited
DETAILS OF PRESTIGIOUS ORDERS Client Name (Project) M/s. IOCL Panipat Refinery (PREP) 1 PJ/CC/PREP/T-055/LOA dated 03.12.2003 (J-5325) Project Management, Design, Detailed Engineering, Procurement, Manufacture,
More informationENGINEERING & SERVICES PVT LTD
ENGINEERING & SERVICES PVT LTD www.sankalpenggservices.com CERTIFICATIONS About Sankalp Incorporated in 1996, Sankalp focused in Oil & Gas Field Components, primarily OCTG, Well Head, Drilling and Down
More informationOnly Emergency Generator Maker
Only Emergency Generator Maker This is http://www.gpckorea.com 1 / 14 CONTENT History Organization Outline of Emergency Generator Characteristics of Emergency Generator Specification Starting System Supplier
More informationEstimation Approval Confirmation. Dear. Machine name : ACR- 2P. 20- Jul Author Review Confirm
Estimation Approval Confirmation Dear Machine name : ACR 2P 20 Jul 11 3... Author Review Confirm 2... 1... No Edit date Modifications Modifier / / / 1. Outline A portable automatic pipe cutting robot is
More informationGalbiati Group / Engineering & Machining Oggiono (Lc) Italy / Via Cà Bianca Pascolo, 26 / Tel / Fax
Galbiati Group is an Italian company, internationally-recognized for the quality of its machining, mechanical engineering, and construction. CHALLENGES TheGroup primarily servesthesteel,energy,astronomy,powertransmission,a
More informationS-Cutter Pipe Cutting & Beveling Machine
S-Cutter Pipe Cutting & Beveling Machine ISO ISO 9001 14001 www.dcseng.co.kr www.s-cutter.co.kr The whole view of DCSENG Co., Ltd. DCSENG CO., LTD. 3 Company History 2008 2009 2010 2011 2012 2013 DCSENG
More informationCORPORATE DETAILS 1 NAME OF FIRM PMT HEALTHCARE PRIVATE LIMITED
CORPORATE DETAILS 1 NAME OF FIRM PMT HEALTHCARE PRIVATE LIMITED 2 ADDRESS PLOT NO 2, OPP. ULTRATECH CEMENT FACTORY, NR. TELEPHONE EXCHANGE, NARODA GIDC ROAD, NARODA, AHMEDABAD 382330. GUJARAT, INDIA. 3
More informationINTRODUCTION (Toolroom Part)
INTRODUCTION (Toolroom Part) http://www.kdacauto.co.kr 1. Annual Sales 2. Turnover Distribution & Employees 3. Main facilities 4. Main Measuring Equipment 5. Strength 6. Products 7. Precision Stamping
More informationFor Sale Exceptional Manufacturing & Office Facility Gasoline Alley Business Park
Mike Williamson For Sale Exceptional Manufacturing & Office Facility Gasoline Alley Business Park commerciallandsales.com 403-346-6655 mike@advantagecommercial.ca Century Centre, #203, 4807 50 th Avenue
More informationEcolGreen BioPolymer. EcolGreen Co.,Ltd (121B-2L)691. Namdong-gu. gu, Incheon,, Korea Tel : ,, Fax : 82-32
Ver 3.English.2008 EcolGreen BioPolymer EcolGreen Co.,Ltd http://www.ecolgreen.com (121B-2L)691 2L)691-1 Gojan-dong Namdong-gu gu, Incheon,, Korea Tel : 82-32 32-813 813-5023 5023,, Fax : 82-32 32-813
More informationHeight Master Page 345. Check Master Page 349. Calibration Tools Page 354
Calibration Instruments Height Master Page 345 Check Master Page 349 Calibration Tools Page 354 344 Digital Height Master Functions ZERO/ABS DATA/HOLD Auto Power OFF after 20 min. non use Low voltage alarm
More information10/8/2012. BHS History. BHS History. BHS-Filtration Inc. Thin-Cake Solid-Liquid Separation, Cake Washing & Drying Technologies
OVERVIEW PRESENTATION Rubber Belt Filters Barry A. Perlmutter, President & Managing Director BHS History 1563 Founded as a mining company 1600 Iron foundry 1888 Production of mixing & crushing machines
More information219mm X 9.0mm HF ERW Tube Mill Line
219mm X 9.0mm HF ERW Tube Mill Line ES-11216 1. Outline :114.3-219.1ERW pipe mill is used to produce pipes in accordance with API-5L /API-5CT Standard, which includes gas& oil delivery pipes, oil casting
More informationCIRRUS SR2X SB 2X R2. Service Bulletin. Issued: Revised: June 26, 2012 July 31, 2012
CIRRUS SR2X Service Bulletin Number: Issued: Revised: June 26, 2012 SNS SUBJECT: 57-40 ATTACH FITTINGS - Lower Landing Gear Attach Bracket Torque 1. COMPLIANCE Mandatory: Cirrus Design considers this Service
More informationABOUT SC-VALVE IS COMMITTED TO CUSTOMER SATISFACTION
1 ABOUT SC-VALVE IS COMMITTED TO CUSTOMER SATISFACTION 2 1. ABOUT SC Valve SPECIAL VALVE. Brief History SC SPECIAL VALVE is the leader in manufacturing of industrial valves since 2001 with the brand name
More informationGas-actuated thermometer with switch contacts For sanitary applications, stainless steel version Model 74
Temperature Gas-actuated thermometer with switch contacts For sanitary applications, stainless steel version Model 74 WIKA data sheet TV 27.02 Applications Food industry Sanitary applications Bio and pharmaceutical
More informationOIL & GAS INDEX 1- CAPABILITIES 2- ENGINEERING SERVICES 3- PRODUCTS: 3b- SYSTEMS. 3a- MAXIMIZING TECHNOLOGY. 3c- INSTRUMENTATION
INDEX 1- CAPABILITIES 2- ENGINEERING SERVICES 3- PRODUCTS: 3a- MAXIMIZING TECHNOLOGY 3a.1- Oil & Gas HP Valves / Control Valves 3a.2- Oil & Gas Special flanges, pipes & accessories 3a.3- Custody Transfer
More informationTube Plugs.
Tube Plugs www.elliott-tool.com Tube Plugs Table of Contents Page Tube Plugs Aluminum Siphons Boilers-Firetube Boilers-Watertube Sugar Mill Vacuum Pans Surface Condensers Chillers & Heat Exchangers Feedwater
More informationterapad ( Website.
BUNTY ENTERPRISES (An ISO 9001:2008 certified ) Mfg of :- Jig & Fixtures,Pannal Checker, Press Tools & Dies, SPMs,BIW welding fixtures, Tube Bending Machine, Material Handling Systems,Industrial Automation,
More informationPACKAGES GAS COMPRESSION PACKAGES ENGINE COMPANY. PACKAGE-ML-B-Feb15
PACKAGES GAS COMPRESSION PACKAGES ENGINE COMPANY PACKAGE-ML-B-Feb15 Custom Packaging Facilities The Arrow Compression Products Packaging Division has a new, 25,000-square-foot state-of-theart packaging
More informationPresentation Macko Fuel Filter, Fuel Water Separator
Presentation Macko Fuel Filter, Fuel Water Separator sfwong111@gmail.com www.filtersindo.com Indonesia Dealer : PT Findotek Principal : Magic Korea Co., Ltd Contamination of Fuel Aged fuel tends to re-polymerize,
More informationNo May, Eaton. Hydrostatic Transaxle. Parts Information. Series 851
Eaton Hydrostatic Transaxle No. 6-6 May, 999 Parts Information Series 85 Series 85 3 5 6 6 (Qty. 5) 7b 7 8 6 (Qty. 3) 7a 6b 9 0 a 8 3 5 5 53 7 8 0 55 6a 7 6 (Qty. ) 9 9 5 0a 8 B-Side 0a 5 3 8 9a 9 J K
More informationAgrotech HEXAMIDE AGROTECH INCORPORATION
HEX MIDE Petrochemicals Fer lizers Pes cides Pharmaceu cals Dyes Herbals Chemicals Bio Fer lizer Bulk Drugs Specialty Chemicals Paint And Resin Industries Polymer Industries Perfumes Industries Oil Industries
More informationSTRUCTURE PIPE(JCO) SPECIFICATION
Specification For Steel pipe Line STRUCTURE PIPE(JCO) SPECIFICATION 1 of 34 ES-11060 Specification For Steel pipe Line === Index === 1. General 1.1 Project 1.2 General 1.3 Detail of facility 1.4 Scope
More informationExcellent SHOULDERING with 3-corner insert. Multi milling tool for best results in perpendicular shouldering
Rich Mill Series Multifunctional Shouldering Milling Tool Excellent SHOULDERING with 3-corner insert Multi milling tool for best results in perpendicular shouldering High rake chipbreaker for high speed
More informationtaunton Broadway Route 138
MIL300837 Miller ArcStation 30FX Welding Table $279.99 MIL300850 X-Clamps 5 $39.99 each The Miller ArcStation 30FX is the ideal work surface for the welder who requires portability and space savings. The
More informationGlobal. MTS Global Co., Ltd. Your Reliable Total Service Partner. Since 2004
Since 2004 Your Reliable Total Service Partner MTS Co, Ltd Address T e l F a x Email Homepage 3-4, Jungang-daero 236beon-gil, Dong-gu, Busan, 48732, Korea +82 51 714 0412 +82 51 714 0413 mtsglobal@martechcokr
More informationVessels, tanks and columns
Corrosion resistant pipes Clad pipes Special pipes and components ready for installation Spools and welded components Assemblies 2 3 Vessel construction BUTTING vessels have been used in a wide range of
More informationSMALL CONSTRUCTION EQUIPMENTS
SMALL CONSTRUCTION EQUIPMENTS SR NO CONCRETE MIXERS 1 [CM-1] FULL BAG CONCRETE MIXER WITH MECHANICAL HOPPER MOUNTED ON [500 19] TYRES CONCRETE MIX 200 LTS A] 6 HP AIR COOLED DIESEL B] 3PH 5 HP ELECTRIC
More informationINNOVATIVE TECHNOLOGIES FOR THE PLANET
ANDRITZ GROUP INNOVATIVE TECHNOLOGIES FOR THE PLANET A GLOBAL PARTNER FOR KEY INDUSTRIES THAT SHAPE THE WORLD MARCH 2018 ANDRITZ HYDRO ANDRITZ KFT. 2018 CHAPTER OVERVIEW 4 PROFILE ANDRITZ KFT. 14-26 PRODUCTS
More informationFCC Special Valves Best Practices to Increase Performance, Reliability & Service Life
FCC Special Valves Best Practices to Increase Performance, Reliability & Service Life Mauro Natalini Deputy Manager - Valve Engineering Dept. REMOSA Cagliari, Italy Tel +39.070.2020237 / Mob +39.366.6891228
More informationDIVINE GROUP OF COMPANIES COMPANY PROFILE
DIVINE GROUP OF COMPANIES COMPANY PROFILE CONTENTS Company Overview Business Strategy for next 5-Years Manufacturing Plants Activities and available facilities Infrastructure Design & Development softwares
More informationMODULAR USED LUBE OIL RE-REFINING
MODULAR USED LUBE OIL RE-REFINING STP - Studi Tecnologie Progetti Srl Engineering& Contractor P.le Ezio Tarantelli, 97 00144 Rome, Italy stp@stpitaly.eu GENERAL Modular Used Lube Oil Re-refining proposed
More informationSHINHUNG POWER ACTUATED CYLINDER (Rev. 03)
SHINHUNG POWER ACTUATED CYLINDER (Rev 03) wwwshpaccom Growing with Customers THROUGH IMPROVEMENT & Innovation CONTENTS Global Major, SH PAC! 05 HISTORY 07 PRODUCTS 10 Production Equipment 11 Manufacturing
More informationTank Equipment. A member of NEUMO Ehrenberg Group. Edition 1.1
Tank Equipment A member of NEUMO Ehrenberg Group Edition 1.1 AWH Tank Equipment Contents Table of Contents Page AWH Tank Equipment Contents 3 VPureMix - Magnetic Coupled Mixer 4 AWH-Connect and Accessories
More informationD3MAX Technology Deployment Update. Mark Yancey, CTO D3MAX LLC Office: (701) Cell: (303)
D3MAX Technology Deployment Update Mark Yancey, CTO D3MAX LLC myancey@d3maxllc.com Office: (701) 738-4924 Cell: (303) 906-6234 www.d3maxllc.com Introduction to D3MAX D3MAX, LLC is a startup technology
More informationContent. Content. Content
Content Content Content Introduction Our Vision and Mission Statement Our Services Completed Gantries Civil Works Our Track Record Quality Assurance Policy Health, Safety &Environmental Policy Company
More informationContents. 1. Introduction of WONST. 2. Organization Chart. 3. Bird s-eye view of WONST. 4. Types of LM GUIDE. 5. Characteristics of LM GUIDE
Jun 25. 2014 Contents 1. Introduction of WONST 2. Organization Chart 3. Bird s-eye view of WONST 4. Types of LM GUIDE 5. Characteristics of LM GUIDE 6. Types of CROSS ROLLER BEARING 7. Products & Sales
More informationConversion Processes 1. THERMAL PROCESSES 2. CATALYTIC PROCESSES
Conversion Processes 1. THERMAL PROCESSES 2. CATALYTIC PROCESSES 1 Physical and chemical processes Physical Thermal Chemical Catalytic Distillation Solvent extraction Propane deasphalting Solvent dewaxing
More informationTube & Pipe Division
Tube & Pipe Division Cu-Ni / Brass / Al-Brass / Copper CONTENTS 01 GREETINGS 02 HSE STATEMENT 03 MANUFACTURING PROCESS 04 COMPANY PROFILE 05 QUALITY 06 ~ 07 PRODUCTS 08 EUROPE STANDARD 09 USA STANDARD
More informationCOMPANY PROFILE 0045
0045 COMPANY PROFILE INTRODUCTION TO THE COMPANY THE MICROFINISH WAY Microfinish Valves Pvt. Ltd. is a privately owned and managed company specializing in industrial valves for energy, process, and natural
More informationA Baosteel Holding Company Boly Pipe Co., Ltd.
Boly Pipe Co., Ltd. January, 2018 Who are we? Baosteel Group The Only One Running Hot Rolling Seamless Mill in ASEAN Fully Processing Manufacturer of OCTG and Line Pipe Established in Mar., 2012 Start
More informationScope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX Gavin Lewis
Scope of Accreditation For Global Instrumentation Services, LLC 523 N. Sam Houston Parkway E, Suite 230 Houston, TX 77060 Gavin Lewis 832-428-2737 In recognition of a successful assessment to ISO/IEC 17025:2005
More informationKI-WON IND. CO., LTD.
. Contents Brief History of KI-WON Production Item Certification Contact Point E-mail : kiwon@kiwon.com TEL. : +82-55-313-9913 FAX : 313-9965 http://www.kiwon.com TEL. : +82-55-337-3300 FAX : 337-3305
More informationVRF. Technical Data Book. Ceiling for America (R410A, 60Hz, HP) Model : AM***FNCDCH***
VRF Technical Data Book Ceiling for America (R410A, 60Hz, HP) Model : AM***FNCDCH*** History Version Modification Date Remark Ver.1.0 Release Ceiling for America (R410A, 60Hz, HP) 15.11.04 - 1 Nomenclature
More informationLOGO.
LOGO www.jet21c.com 1. HISTORY OF JEONJIN 2. TECHNOLOGY INSTITUTION 3. PRODUCT The History of Company R1 Established JEONJIN ENTECH Registered the factory Developed a high-speed opening and closing device
More informationAQUASTAR C6. (Comfort 6000) Next Generation Auto Backwash Valve System. (selectable time-pressure or remote cycle start)
AQUASTAR C6 (Comfort 6000) Next Generation Auto Backwash Valve System (selectable time-pressure or remote cycle start) SIDE MOUNTED AND TOP MOUNTED VALVES WITH QUICK INSTALL ELECTRIC ACTUATORS FOR PIPE
More informationGUIDE FOR CERTIFICATION AND INSPECTION OF WHEEL SHOPS. Routine Special Shop Certification Follow up Inspection
GUIDE FOR CERTIFICATION AND INSPECTION OF WHEEL SHOPS Routine Special Shop Certification Follow up Inspection M-1003 Approved ISO Approved SR = See Report Attachments Y/N N/A NI = Not Inspected # MOUNTED
More information825 DORA STREET JACKSONVILLE, FL 32204
825 DORA STREET JACKSONVILLE, FL 32204 INDUSTRIAL & MARINE REPAIRS CNC & CONVENTIONAL MACHINING Founded 1929 Ted Gollnick - President / General Manager Chris Gollnick - Vice President / Operations Manager
More informationProcesses MIG (GMAW) Pulsed MIG (GMAW-P) Flux-cored (FCAW)
Millermatic 255 Issued Oct. 2018 Index No. DC/12.8 MIG Power Source, Wire Feeder and Gun Package Quick Specs Industrial Applications General fabricators Contract welding services Plant maintenance shops
More informationVRF. Technical Data Book. DVM Indoor Unit PAC for Global (INV, R410A, HP) Model : AM140JNPDKH/TK (50/60Hz) AM280JNPDKH/TK (50Hz)
VRF Technical Data Book DVM Indoor Unit PAC for Global (INV, R410A, HP) Model : AM140JNPDKH/TK (50/60Hz) AM280JNPDKH/TK (50Hz) History Version Modification Date Remark Ver.1.0 Release DVM Indoor PAC for
More informationCALIBRATION SYSTEM CERTIFICATE
CALIBRATION SYSTEM CERTIFICATE With respect to products (measuring instruments and testing instruments), we hereby certify that we have established our calibration system traceable to the national (international)
More informationInverter Resistance Welder/Horizontal Pressure Head NRW-IN8400A/NA-184 Now Available
December 10, 2015 Nippon Avionics Co., Ltd. http://www.avio.co.jp/english/ Industry's Most Compact Welder! Current Stop Time Variation within 1 ms. High Reliability Welding for On-vehicle Motor Coils Inverter
More informationSTANDARD TIME AND MATERIAL RATE SHEET 1/01/12 12/31/12
STANDARD TIME AND MATERIAL RATE SHEET 1/01/12 12/31/12 Straight Time Time and One-Half Double Time Superintendent $80.52 $103.32 $126.12 Foreman $73.91 $93.46 $113.00 Pusher $68.85 $87.74 $106.64 Mechanic/Welder
More informationList of completed contracts/iranian inspection company
List of completed contracts/ian inspection company 1 Inspection during operation of PVC&CA plants Bandar Mahshahr, Pipework&Equipment Arvand Petrochemical 2012-2013 2 Manufacturing inspection of ASME pressure
More informationPhone:
KERALA AGRICULTURAL UNIVERSITY AGRICULTURAL RESEARCH STATION MANNUTHY 68065. THRISSUR Phone: 0487-37076 Email : arsmannuthy@kau.in RE-TENDER NOTICE No. B/400/ dated 0/03/06 Sealed tenders are invited for
More informationSand & Gravel, Inc. Job Demands Analysis. Purpose of Activities:
Job Demands Analysis Sand & Gravel, Inc. Company: Thelen Sand & Gravel, Inc. Job Title: Maintenance / Welder Location: Maintenance Shop Classification: Regular Duty Purpose of Activities: The maintenance
More informationU1000 U1000 SUPER RT1000 CNC BED TYPE MILLING MACHINE CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE
U1000 U1000 SUPER CNC BED TYPE MILLING MACHINE RT1000 CNC BED TYPE MILLING MACHINE WITH ROTARY TABLE U1000 CNC Bed Type Milling Machine Machine Specification U1000 Surface 2500 / 3100 / 3600 900(1050)mm
More informationCATALOG. 2/2 - Way Angle Seat Valves SMART IN FLOW CONTROL.
CATALOG / - Way Angle Seat Valves SMART IN FLOW CONTROL. Description and Features The SED Angle Seat Valve is composed of a /-way angle seat valve body and a pneumatically operated piston actuator, which
More informationPUBLIC AUCTION th Street Hammond, Indiana Thursday, December 15, Let Our Experience Be Your #1 Asset TM DATE TIME LOCATION
PUBLIC AUCTION Surplus to the Ongoing Needs of a Major Metal Framing Company 1994 1987 3 available StriliCH/taylOR WINFielD 72 coil build-up/weld line STAMCO 72 injector head type slitting line 72 x 10,000
More informationSelf sufficient services with regards to, plant, equipment, tools, etc.
C O M P A N Y P R O F I L E 1 Are the market leaders offering. A complete construction solution encompassing Structural Steelwork, Platework, Piping, Electrical and Instrumentation. Self sufficient services
More informationNEUMO BioControl Model
Accessories NEUMO Model 910.60 WIKA Data Sheet AC 09.14 Applications Bio and pharmaceutical industry Sanitary applications Food industry Special Features NEUMO No dead space Hygienic design Materials and
More informationSpecification Approval Sheet
Specification Approval Sheet Name: Tenergy 9V 600mAh Li-ion Rechargeable Battery Model: 30593 SPECS: 9V 600mAh Approved By Jay Wang Checkup Make Yezi Dong Signature Date Customer Confirmation Company Name:
More informationInnovative Partnership
Roller Plant Idler Plant Roller Plant 544-2, Segyo-dong, Pyeongtaek-si, Gyeonggi-do, Korea Idler Plant 542-4, Segyo-dong, Pyeongtaek-si, Gyeonggi-do, Korea Seal Plant 538-5, Segyo-dong, Pyeongtaek-si,
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 RIVERVIEW CALIBRATION SERVICES, LTD 5706 Veto Road Belpre, OH 45714 J. Michael Pennell Phone: 740 678 8625 CALIBRATION Valid To: July
More informationBB4500 BORING MACHINE
BB4500 BORING MACHINE 7 2015 BB45 The proven technology of the Climax BB5000 Boring Machine now available in this smaller, affordable package. Quick and Easy Setup Modular components make setup quick and
More informationELECTRONIC OVERHEAD TRAVELLING CRANE DIMENSIONS & LOAD DATA
ELECTRONIC OVERHEAD TRAVELLING CRANE DIMENSIONS & LOAD DATA FOR ESTIMATING PURPOSES ONLY CONTENTS TOP RUNNING SINGLE GIRDER CRANES 2, 3 & 5 Ton 7.5 & 10 Ton PAGE 2-5 TOP RUNNING DOUBLE GIRDER CRANES 5,
More informationFiltration efficiency: 99% or more HEPO2element
High Precision Filter for Liquids Series Filtration efficiency: 99% or more HEPO2element Filtration accuracy: 2, 4, 6 or 13 µm (Filtration efficiency 99%) Membrane element Filtration accuracy: 0.2 or 0.4
More informationDiaphragm pressure gauge, flush For sanitary applications Model PG43SA-S, NS 100
Pressure Diaphragm pressure gauge, flush For sanitary applications Model PG43SA-S, NS 100 WIKA data sheet PM 04.16 Applications for further approvals see page 10 Hygienic pressure measurement in sanitary
More information