S0300-BV-CAT-010 PUMPING SYSTEM, SALV, SBM, 6-INCH HYD, 2200-GPM. System - S Inch Hydraulic Submersible Salvage Pumping System
|
|
- Joshua Strickland
- 6 years ago
- Views:
Transcription
1 6-Inch Hydraulic Submersible Salvage Pumping System Page 1
2 The 6-Inch Submersible Salvage Pumping System S18000 is a high-capacity pumping system used for dewatering, counterflooding, or other purposes requiring movement of water. The system consists of a 6-inch hydraulic submersible pump, hydraulic power unit, hose reel assembly, 120-gallon fuel storage tank, portable workstation, tripod, spare parts kit, and ancillary set. NOTE: The system is NOT configured to pump petroleum products from a stranded vessel. System Components for ESSM No Nomenclature Type Qty NS Cont PW0200A POWER UNIT, HYD, MOD 8, DSL, (S BL 1 Y SL0385 ROUNDSLING BRIDLE, POLY, 4-LEG, 6' Contents 1 PW0201 HYD HOSE REEL ASSEMBLY FOR PW0200 BL 1 PW0203 ANCILLARY SET (6" SUBM SALV PUMPING SYSTEM) BL 1 Y CP3010 CONTAINMENT POOL, MCHRY, 10' X 6' X 12" Contents 1 CP3020 CONTAINMENT POOL, 6' X 4' X 12" Contents 1 PU0295 PUMP, SALVAGE, SUBMERSIBLE, HYD, 6" Contents 1 PU0296 SPARE PARTS KIT, FOR PU0295 PUMP Contents 1 PW0206 SPARE PARTS KIT FOR MOD 8 HPU, PW0200 Contents 1 TK0045 TANK, DIESEL FUEL, 120-GALLON, TRANSPORTABL Contents 1 PW0204 WORKSTATION (6" SUBM SALV PUMPING SYSTEM) BL OPTL 1 PW0205 TRIPOD (6" SUBM SALV PUMPING SYSTEM) BL 1 VA0285 VAN, PUMPING SYSTEM, SALVAGE, 6" SUBM PUMP BL OPTL 1 Y DE0010 DEHUMIDIFIER, MODEL SSP-6A Contents 1 Baseline verified on 5/16/2016, * Not shown in catalog. S18000 Alternates Page 2
3 ESSM - PW0200A POWER UNIT, HYD, MOD 8, DSL, 71 (SALV) Mod 8 Hydraulic Power Unit PW0200A The Salvage Mod 8 Diesel Hydraulic Power Unit PW0200A is a skid-mounted assembly that provides hydraulic fluid flow of up to 71 gpm at 4000 psi from a variable displacement, pressure compensated pump. The flow rate can be mechanically varied at the control panel. Maximum system pressure is adjustable at the pump. Hydraulic Power Unit Highstar Industries Model Engine Model Type No. of cylinders Combustion Starting Horsepower Fuel Detroit Diesel Series 40, 8.7 LT In-line 6, in-line configuration 4-cycle Hydraulic 2100 rpm Diesel Page 3
4 Fuel source 120-gal. external tank w/pickup tube & hoses Fuel consumption 11.8 gal./hr Pump Sundstrand Model Series 90 Variable Axial piston Max. displacement 6.10 cu. in./rev Hydraulic fluid Rando 46 Hydraulic reservoir capacity 70 gallons Hydraulic fluid output psi Shipping Operating Length 7 ft, 8 in 7 ft, 8 in Width 3 ft, 11 in 3 ft, 11 in Height 4 ft, 0 in 6 ft, 5 in Cube 121 cu ft 193 cu ft Footprint 31 sq ft 31 sq ft Weight 4205 lb 4205 lbs References Ref No Reference 1 Commercial Off-the-Shelf (COTS) Manual, Hydraulic Power Unit (HPU) Model 82647, PW0200 Page 4
5 ESSM - SL0385 ROUNDSLING BRIDLE, POLY, 4-LEG, 6' Roundsling Bridle SL0385 The 4-Leg Polyester Roundsling Bridle SL0385 is designed specifically for handling the Hydraulic Power Unit PW0200A in an under-the-hook configuration using a crane. It is equipped with four screw pin shackles and is shipped attached to the four lifting points of the hydraulic power unit. Roundsling Bridle J. Henry Holland Model EEURS2 Capacity 4, Shackles 4 Midland Forge Model M649G Capacitiy 2 Ton Shipping Page 5
6 Length 1 ft, 6 in Width 1 ft, 6 in Height 1 ft, 6 in Cube 4 cu ft Footprint 3 sq ft Weight 14 lb References Ref No Reference 1 None Page 6
7 ESSM - PW0201 HYD HOSE REEL ASSEMBLY FOR PW0200 Hydrualic Hose Reel Assembly for PW0200 The Hydraulic Hose Reel Assembly PW0201 stores two supply, return, and case drain hydraulic hose assemblies. These are used in the operation of the 6-Inch Submersible Salvage Pump PU0295 by the Hydraulic Power Unit PW0200. The hoses are precharged with Rando 46 hydraulic fluid to limit fluid loss from the hydraulic power unit during system setup. Forklift slots are included in the base to facilitate handling. Hose Assemblies (2 lengths each): Supply Hose Quick disconnects 1 1/4" x 50' Aeroquip FC273-20, 5000 psi 1 1/4" Snap-Tite, 71 series Return Hose Quick disconnects 1 1/4" x 50' Aeroquip FC273-20, 5000 psi 1 1/4" Snap-Tite, 71 series Case drain Hose Quick disconnects 1/2" x 50' Aeroquip FC498-08, 400 psi 1/2" Snap-Tite, PH series Page 7
8 Shipping Length 4 ft, 6 in Width 4 ft, 1 in Height 5 ft, 7 in Cube 103 cu ft Footprint 19 sq ft Weight 2295 lb References Ref No Reference 1 None Page 8
9 ESSM - PW0203 ANCILLARY SET (6" SUBM SALV PUMPING SYSTEM) 6" SUBM SALV Pumping System Ancillary Set The Ancillary Set PW0203 contains items necessary to support one S18000 Salvage Pumping System. The ancillary set wire mesh basket accommodates the 6-Inch Submersible Salvage Pump PU0295 and is equipped with a plywood cover for storage of the empty 120-gallon fuel tank during shipping. ESSM Facility Model PW0203 The set contains the following major items: Wire mesh basket, 62" x 36" x 41" Containment Pool, Mchry, 10' x 6' x 12" CP Containment Pool, Mchry, 6' x 4' x 12" CP Pump, Salvage, Submersible, Hydraulic, 6" PU Spare Parts Kit, For PU0295 Pump PU Tank, Diesel Fuel, 120-Gallon TK Block, 3/8" with safety hook 1 Page 9
10 Cable, lashing, 30' 6" long 1 Handtruck, modified for PU0295 pump 1 Head, tripod 1 Hose, layflat, 6"x 50' 3 Jerry can, 5-gallon, with flexible spout 1 Tag line, 50', with safety hook ends 2 Nut, hex, 1"-8 UNC with washers 2 Pad, absorbent (package) 1 Pin, assembly 3 Plug, 6" camlock 3 Winch, with cable 1 Turnbuckle, 5/8 1 Inventory, laminated 1 Ammo box (small parts container): 1 Berm repair kit 1 Clip, wire rope 2 Diagram, spare parts location 1 Eyebolt, 3/4"-10 x 4-1/2" 1 Parts list, tripod 1 Pin, base plate 3 Pin repair kit, 1/4 diameter 3 Technical manual, tripod head winch 1 Base, tripod, with rubber pad 3 Winch safety stop assembly 3 Shipping Length 5 ft, 3 in Width 3 ft, 1 in Height 3 ft, 7 in Cube 59 cu ft Footprint 17 sq ft Weight 1800 lb Page 10
11 References Ref No Reference 1 None Page 11
12 ESSM - CP3010 CONTAINMENT POOL, MCHRY, 10' X 6' X 12" CP3010 Folded Machinery Containment Pool CP3010 The Machinery Containment Pool CP3010 is a 10' x 6' x 12" urethane berm. It is used to provide a means of catching and containing any oil, fuel, or contaminants, leaking or spilled from the operating equipment it contains. Page 12
13 Basic Concepts Model A Shipping Operating Length 3 ft, 3 in 10 ft, 0 in Width 2 ft, 5 in 6 ft, 0 in Height 0 ft, 9 in 1 ft, 0 in Cube 6 cu ft 60 cu ft Footprint 8 sq ft 60 sq ft Weight 70 lbs 70 lbs References Ref No Reference 1 None Page 13
14 ESSM - CP3020 CONTAINMENT POOL, 6' X 4' X 12" 6' X 4' X 12" Containment Pool CP3020 The Machinery Containment Pool CP3020 is a 6' x 4' x 12" urethane berm. It is used to catch and contain any oil, fuel, hydraulic fluid, or contaminants leaking or spilled from diesel powered or hydraulically driven components. Basic Concepts Model A Shipping Operating Length 2 ft, 3 in 6 ft, 0 in Width 2 ft, 4 in 4 ft, 0 in Height 0 ft, 8 in 1 ft, 0 in Cube 4 cu ft 24 cu ft Footprint 6 sq ft 24 sq ft Weight 35 lbs 35 lbs Page 14
15 References Ref No Reference 1 None Page 15
16 ESSM - PU0295 PUMP, SALVAGE, SUBMERSIBLE, HYD, 6" 6" Hydraulic Submersible Salvage Pump Performance Curve for PU0295 Page 16
17 The 6-Inch Hydraulic Submersible Salvage Pump PU0295 is a high-capacity, hydraulically driven, submersible, centrifugal pump with a shutoff head pressure of 48 psi and a maximum discharge flow of 2200 gpm. The pump, with hoses and fittings attached, is sized to fit through a standard 12 1/2-inch Butterworth-type opening. Carrying handles located at the top and bottom of the pump allow for positioning by personnel and serve as pad eyes for lifting slings. The pump can be transported manually by a specially modified handtruck. The pump is powered by the Hydraulic Power Unit PW0200A. Pump Assembly Fischcon Trading & Engineering Model VDH Type Centrifugal Suction dia. 6" male camlock Discharge dia. 6" male camlock Speed Variable Output 2200 gpm Hyd. connections Snap-tite, 71 Supply 1 1/4" female Return 1 1/4" male Case drain 1/2" male Hydraulic Motor Eaton Type Shipping Operating Length 1 ft, 1 in 1 ft, 1 in Width 1 ft, 1 in 1 ft, 1 in Height 3 ft, 7 in 3 ft, 7 in Cube 5 cu ft 5 cu ft Footprint 2 sq ft 2 sq ft Weight 260 lb 260 lbs Page 17
18 References Ref No Reference 1 None Page 18
19 ESSM - PU0296 SPARE PARTS KIT, FOR PU0295 PUMP Spare Parts Kit For PU0296 Pump The Spare Parts Kit PU0296 contains the items necessary to support the operation and maintenance of one 6- Inch Hydraulic Pump PU0295. ESSM Facility Model PU0296 The kit contains the following major items: Container, 18" x 11" x 10", w/lid: 1 Fitting, quick disconnect, female 1 Fitting, quick disconnect, male 1 Kit, repair, quick disconnect, female 1 Kit, repair, quick disconnect, male 1 Inventory, laminated 1 Shipping Page 19
20 Length 1 ft, 7 in Width 1 ft, 0 in Height 0 ft, 7 in Cube 1 cu ft Footprint 2 sq ft Weight 10 lb References Ref No Reference 1 None Page 20
21 ESSM - PW0206 SPARE PARTS KIT FOR MOD 8 HPU, PW0200 Spare Parts Kit for MOD 8 HPU PW0200 The Spare Parts Kit PW0206 contains the items necessary to support the operation and maintenance of one Hydraulic Power Unit PW0200. ESSM Facility Model PW0206 This kit contains the following major items: Container, spare parts kit, 24-gallon: 1 Filter, air 1 Filter, engine coolant 1 Filter, engine oil 1 Filter, fuel 1 Filter, engine fuel prefilter 1 Filter, hydraulic, high pressure 1 Filter, hydraulic, medium pressure 2 Filter, hydraulic, system return 2 Plug, bleeder 1 Page 21
22 Repair kit quick disconnect (71-3C16-SPK) 2 Repair kit quick disconnect (71-3N16-SPK) 2 V-belt, engine auxiliaries 1 V-belt, engine starting system 1 Inventory, laminated 1 Shipping Length 2 ft, 3 in Width 1 ft, 8 in Height 1 ft, 5 in Cube 6 cu ft Footprint 4 sq ft Weight 45 lbs References Ref No Reference 1 None Page 22
23 ESSM - TK0045 TANK, DIESEL FUEL, 120-GALLON, TRANSPORTABLE Transportable 120-Gallon Diesel Fuel Tank The Transportable 120-Gallon Diesel Fuel Storage Tank TK0045 is a portable, stainless steel container used to provide No.2 diesel fuel to the diesel-driven HPU. Four pad eyes are located at the top of the tank for attachment of lifting slings, and there is sufficient clearance at the bottom for lifting forks. A tank opening with cap is provided for filling and for the insertion of a pickup/return fuel hose assembly. The fuel pickup tube and hoses are stored on the HPU. A manhole is provided for cleaning and inspecting the tank interior. A ball type valve, located on one side of the tank bottom, is used to drain fuel from the tank. Hoover Group, Inc. Design (pressure) 9.5 psi Tank weight 300 lb Gross weight 1255 lb Volume capacity 120 gal Material Stainless steel ASTM A-240 Shipping Length 4 ft, 2 in Page 23
24 Width 3 ft, 9 in Height 2 ft, 3 in Cube 36 cu ft Footprint 16 sq ft Weight 310 lb References Ref No Reference 1 None Page 24
25 ESSM - PW0204 WORKSTATION (6" SUBM SALV PUMPING SYSTEM) 6" SUBM SALV Pumping System Workstation The Workstation PW0204 contains tools and other material necessary for maintenance and repair of the HPU PW0200 or the 6 Submersible Salvage Pump PU0295. The Workstation is housed in a wire mesh basket with forklift slots in the base and removable casters. The wire mesh basket has two hinged sides; one hinged side folds upward to provide a working platform for a bench vise and a grinder, and the other folds upward to provide access to a four-drawer tool cabinet. Essm Facility Model PW0204 The station contains the following major items: Wire mesh basket, 63" x 36" x 46": 1 Bench grinder, 6", 1/3 hp 1 Bench vise, 4" 1 Tool cabinet, 4-drawer, locking 1 Page 25
26 Shipping Operating Length 5 ft, 2 in 5 ft, 2 in Width 3 ft, 1 in 3 ft, 1 in Height 3 ft, 7 in 3 ft, 7 in Cube 58 cu ft 58 cu ft Footprint 16 sq ft 16 sq ft Weight lbs References Ref No Reference 1 None Page 26
27 ESSM - PW0205 TRIPOD (6" SUBM SALV PUMPING SYSTEM) 6" SUBM SALV Pumping SystemTripod PW0205 The Tripod PW0205 is a 3-legged, adjustable stand that is used to position, suspend, and lower the six-inch submersible salvage pump through an opening into a tank, void, or other compartment to be dewatered. The winch cable is led through a block at the head of the tripod and hooked to the lifting sling of the pump. The pump is then raised or lowered by means of an attached, manually operated winch. The tripod legs shipped on top of the Hydraulic Power Unit PW0200A. Tripod Wallace Products Corp. Model Type Aluminum, w/base pad kit Capacity 3 tons Winch Dutton-Lainson Co. Model DLB250 #675 Type Manual Winch cable 5/16" x 50' Page 27
28 Shipping Operating Minimum Maximum Length 8 ft, 5 in Width 3 ft, 8 in Height 0 ft, 10 in 8 ft, 9 in 12 ft, 9 in Cube 26 cu ft Footprint 31 sq ft Weight (lb) 190 lb Height, eyebolt to floor 6 ft, 8 in 10 ft, 3 in Dimensions between legs 5 ft, 3 in 9 ft, 3 in References Ref No Reference 1 None Page 28
29 ESSM - VA0285 VAN, PUMPING SYSTEM, SALVAGE, 6" SUBM PUMP Length 20 ft, 0 in Width 8 ft, 0 in Height 8 ft, 0 in Volume (ft³) 1280 cu ft Footprint (ft²) 160 sq ft Weight (lb) lb Page 29
30 ESSM - DE0010 DEHUMIDIFIER, MODEL SSP-6A SPP6A Model Dehumidifier DE0010 The SPP6A Model Dehumidifier DE0010 easily maintains environments at relative humidity levels that prevent corrosion and/or the formation of mold or mildew. It is uniquely suited to storage facilities that require the highest reliability and ruggedness. This compact unit can remove up to 25ppd of moisture in extreme environments. EBAC Industrial Products Inc. Model SSP6A Voltage 115 V ac Airflow 150 cfm Effective volume 3,000 cu. ft. Minumim operating temp 33 F Maximum operating temp 131 F Shipping Length 1 ft, 7 in Width 1 ft, 2 in Page 30
31 Height 0 ft, 11 in Cube 2 cu ft Footprint 2 sq ft Weight 60 lbs References Ref No Reference 1 None Page 31
S0300-BV-CAT-020 TANKER OFFLOAD SYS (NON IO) System - P /14/2018 2:47:14 AM
Page 1 NOT ON INVENTORY OBJECTIVE PIODISP The Tanker Offload System P17100 consists of a Mod 6 hydraulic power unit with a machinery containment pool, a spare part kit for the hydraulic power unit, two
More informationS0300-BV-CAT-010 PUMPING SYSTEM, SBM, HYD, 2" TO 4", 1500-GPM. System - S " to 4" Hydraulic Submersible Pumping System S18250
2" to 4" Hydraulic Submersible Pumping System S18250 Page 1 The 2" to 4" Hydraulic Submersible Pumping System S18250 consists of an ancillary set with 2", 3", and 4", hydraulically driven, submersible
More informationS0300-BV-CAT-010 CAPSTAN, 18-INCH, PORTABLE HYD, 6000-LB LINE PULL. System - S Overview of Portable Hydraulic 18-Inch Capstan System S07100
Overview of Portable Hydraulic 18-Inch Capstan System S07100 Page 1 The Portable Hydraulic 18-Inch Capstan System S07100 consists of a hydraulically-driven capstan (including a control stand and associated
More informationS0300-BV-CAT-020 FLOATING HOSE SYSTEM. System - P P08100 System Overview 10/6/ :03:46 PM
P08100 System Overview Page 1 The Floating Hose System P08100 consists of four, 20-foot storage/shipping vans, 5000 feet of 6" x 100' layflat floating hose, a 22-cfm diesel air compressor, a 300-cfm hydraulic
More informationS0300-BV-CAT-010 BEACH GEAR SYSTEM. System - S Beach Gear System S05100 (Anchoring System Components) 4/1/ :37:58 AM
Beach Gear System S05100 (Anchoring System Components) Page 1 Beach Gear System S05100 (Hydraulic Cable Puller System Components) Page 2 The Beach Gear System S05100 is made up of two ground legs, two
More informationS0300-BV-CAT-020 HOT TAP SYSTEM. System - P Hot Tap System Overview P /4/ :07:02 AM
Hot Tap System Overview P10100 Page 1 The Hot Tap System P10100 consists of two hot tap machines, two heavy duty lightweight hot tap machines, two Mod 2 hydraulic power units, two hydraulic hose reel assemblies,
More informationOIL CONTAINMENT BOOM SYSTEM, USS-18 IFL BOOM
18-Inch Inflatable Boom Oil Containment System P19080 Page 1 The 18-Inch Inflatable Boom Oil Containment System P19080 is the primary containment equipment at an oil spill site in shallow calm water, rivers,
More informationS0300-BV-CAT-010 SECONDARY TOWING BRIDLE SYSTEM. System - TS0605
The Secondary Towing Bridle Assembly System TS0605 consists of a flounder plate, plate shackles, bolt-type shackles, wire ropes, and wire rope clamps. These materials may be used to back up the Primary
More informationS300-BV-CAT-020 OIL CONTAINMENT BOOM SYSTEM, 18" HARBOR BOOM. System - P " Harbor Boom Oil Containment Boom System P19070
18" Harbor Boom Oil Containment Boom System P19070 Page 1 The 18" Harbor Boom Oil Containment Boom System P19070 is the primary containment equipment at an oil spill site in shallow calm water, rivers
More informationS0300-BV-CAT-020 VACUUM PUMP/SKIMMER SYSTEM. System - P Vaccuum Pump/Skimmer System P /12/2018 9:00:21 AM
Vaccuum Pump/Skimmer System P18100 Page 1 The Vacuum Pump/Skimmer System P18100 is a stationary vacuum pump specifically developed for oil spill countermeasures. The system uses a vacuum pump to provide
More informationS0300-BV-CAT-020 SALVAGE SUPPORT SKIMMER SYSTEM. System - P Salvage Support Skimmer System P16200 Overview 5/12/2018 9:00:31 AM
Salvage Support Skimmer System P16200 Overview Page 1 The Salvage Support Skimmer System P16200 is a stand-alone response package for recovering oil from small salvage-related spills inside ship spaces,
More informationS0300-BV-CAT-020 FENDERS (LP PNEUMATIC 10' X 50' 4/SYS) System - P /16/2019 7:35:25 AM
Page 1 The 10' x 50' Low Pressure Fender System P06100 consists of a 20-foot van, which stores four 10' x 50', low pressure ship fenders. The fenders are designed to allow supporting vessels or receiving
More informationS0300-BV-CAT-020 INLAND SUPPORT SKIMMER SYSTEM. System - P Inland Support Skimmer System P /26/2018 8:46:56 AM
Inland Support Skimmer System P16700 Page 1 The Inland Support Skimmer System P16700 is a stand-alone pollution response package for recovering oil from both onshore and inland environments. Such locations
More informationLightweight Hot Tap Traing Kit P
Lightweight Hot Tap Traing Kit P101110. Page 1 The Hot Tap Training System P10110 contains all of the operational components of a full scale Lightweight Hot Tap necessary for training and maintaining proficiency
More informationWilliamsburg, VA SYSTEM # DESCRIPTION
Williamsburg, VA SYSTEM # DESCRIPTION DS0100 FLYAWAY DEEP OCEAN SALVAGE SYSTEM (FADOSS), 15 KIP DS0111 FLYAWAY DEEP OCEAN SALVAGE SYS, 30 KIP (2ND GEN) DS0120 FLYAWAY DEEP OCEAN SALVAGE SYSTEM (FADOSS),
More informationWIRELESS SMART TOW SYSTEM (3RD GENERATION)
Wireless Smart Tow System (3rd Generation) TS0540 Page 1 The Tow Alarm System TS0540 is an integrated towing monitoring system. This system is capable of continuously monitoring data for display in the
More informationAlaska Base Inventory
Alaska Base Inventory System No. System Name E00003 ESSM FACILITY, ALASKA BASE P01100 BEACH TRANSFER SYSTEM P02100 BOARDING KIT P03100 BOOM HANDLING BOAT P03110 BOOM HANDLING BOAT, 30' P03200 BOOM TENDING
More informationSystem Components for S23000
The Salvage Synthetic Line System consists of numerous lines with physical/performance characteristics that can be applied to various lifting, mooring, rigging, or other applications during salvage operations.
More informationIC-20-G. Engineering Spec. View thousands of Crane Specifications on FreeCraneSpecs.com. Page 1 of 7 Date: June 2006
Engineering Spec IC-20-G Page 1 of 7 Replaces: Form BD104G Dated: May 2004 The IC-20-1G is a self-propelled industrial crane designed for in-plant lifting and material handling applications. It is powered
More informationAlbemarle County Virginia Brush Fire Truck Specification
Albemarle County Virginia Brush Fire Truck Specification Purpose: This specification is intended to be used for the procurement of Brush Fire Suppression Apparatus for the Fire Departments & Companies
More informationBRENCO. Aerial Tools & Equipment
BRENCO 81 C2 Cable Lasher For cables or cable bundles up to 1.87 in. (4.7 cm) on strands 1/4 in. to 3/8 in. Positive mechanical brake prevents lasher back-up until brake is released. Built to last, the
More informationSTORAGE & MATERIAL HANDLING
www.greenlee.com STORAGE & MATERIAL HANDLING Contractors the world over rely on Greenlee storage and material handling solutions to keep product safe. From small chests to large field offices, and now
More informationIC-20-J. Tech Spec. Industrial Crane. Features the exclusive rotating boom
Tech Spec IC-20-J Industrial Crane Features the exclusive rotating boom Capacity on Outriggers... 5,000 lbs (2,270 kg) Pick and Carry Capacity... up to 2,500 lbs (1,130 kg) Height... 5 6 (1.66 m) w/o Operator
More informationOperation & Service Manual
Operation & Service Manual Model: 08-4049-1012 Includes Illustrated Parts Lists Tronair, Inc. 1740 Eber Road Holland, Ohio 43528-9794 USA Telephone: (419) 866-6301 800-426-6301 Fax: (419) 867-0634 Web
More informationIC-40-2C. Tech Spec. Industrial Crane. Four-wheel drive for tough applications. View thousands of Crane Specifications on FreeCraneSpecs.
Tech Spec Industrial Crane Four-wheel drive for tough applications Rated Capacity Limiter... Standard Capacity on Outriggers... 9,000 lbs Pick and Carry Capacity... up to 7,200 lbs Height... 6 8 Width...
More information7783-A B C4
SERVICE INSTRUCTIONS 7783-A4, 7783-B4 and 7783-C4 Low Pressure Fluid Lubricant Pumps 7783-A4 7783-B4 7783-C4 DESCRIPTION Model 7783 Series Pumps are single-action, low pressure units designed to deliver
More informationPRESSURE TANKS. Approx. Tapping Size - Inches Approx. Ship. Wt. Size Inches AIR-E-TAINER PRE-PRESSURIZED WELL SYSTEM TANKS. Ship. Max Approx. Size In.
PRESSURE TANKS STANDARD VERTICAL GALVANIZED WELL SYSTEM TANKS Total Drawdown - Gallons Approx. Tapping - Inches Approx. Tank Vol..155 @.101 @.071 @ Ship. Wt. Inches A B C Gals. 20/40 30/50 40/60 Lbs. 124831
More informationRENTAL AND SALE TANKS, PUMPS, HOSES, BASKETS, CUTTING BOXES, RIG SOAP, CARGO CARRYING EQUIPMENT, FRAC TANKS, PIPE SLINGS AND VACUUM TRUCKS
RENTAL AND SALE TANKS, PUMPS, HOSES, BASKETS, CUTTING BOXES, RIG SOAP, CARGO CARRYING EQUIPMENT, FRAC TANKS, PIPE SLINGS AND VACUUM TRUCKS GULF OF MEXICO PRODUCT INDEX GPS TRACKING CARGO CARRYING EQUIPMENT
More informationINDUSTRIAL IGER TANK FARM. Equipment Rental Solutions JULY 2016
T IGER INDUSTRIAL TANK FARM Equipment Rental Solutions JULY 2016 When it comes to supplying tank cleaning equipment, you need a company that gets the job done right. That s the mark of Tiger. Table of
More informationHPVR-10 AXIAL PISTON PUMPS
The HPVR series of inline axial piston variable displacement pumps, are available in five displacements and three compact frame sizes. These pumps feature medium-high working pressure capabilities that
More informationConsider The Possibilities...
FS/FD Air-Cooled Fluid Cooler Catalog 710.1 Consider The Possibilities... Cools most any non-corrosive fluid Closed-circuit cooling avoids contamination Cold weather economizer for interior cooling loads
More information2,895 HD-9 3,895. 4,150 PL-7000XR Parking Lift 18,805 13,680
PARKING LIFTS 2,895 HD-9 6,595 HD-9SWX HD-9 Series 9,000 lbs. 4 post service / parking lift HD-9 - Single wide 152 max wheelbase / max lift 74 Overall - 200 long x 110 wide HD-9SWX - Double wide 176 max
More informationStandard on the car lathe Sold bare - Or buy as a package with an adapter set and accessory kit. 2 year warranty
On the car Brake lathes Save time and money by turning rotors on the car Easy setup with a single spindle speed, single feed rate and positive rake tooling Choose from adapter sets that give you the coverage
More informationModel 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors PARTS CATALOG
Model 802 Center Mount Adapter For New Holland 9030 & TV140 Bi-Directional Tractors 1 PARTS CATALOG TABLE OF CONTENTS Frame & Tractor Linkage...2,3 Header Linkage & Float Group...4,5 Header Drive Hydraulics
More informationDESCRIPTION. 10" Square Valve 10" Valve for United Plastics Tank Valve Handle-Complete Assembly Auxilliary Handle Lock less Hardware (see page 12)
QUIC-FLOW MANUAL DUMP VALVE ZICO 070PM REV 3-5- QUIC-FLOW valves are the fastest dumping systems for tankers, bar none, dumping up to 800 GPM. Mounting the valve at the bottom of the tank provides approximately
More informationAir-Cooled Fluid Cooler
Catalog KM-FSD-0313A FS/ FD Series Air-Cooled Fluid Cooler Consider The Possibilities Cools most any non-corrosive fl uid Closed-circuit cooling avoids contamination Cold weather economizer for interior
More informationModel Model Model 3650 Model 3614
Model 3601 Model 3662 Model 3650 Model 3614 Model 3675 Portable used fluid handling equipment and fuel caddies Collection equipment pressurized (self-evacuating)....... 170 Upright drains.....................................
More informationVIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
More informationPUMPS NEW PUMPS. Call for rates and reservations
NEW High Volume, Sound Attenuated, High Head, Specialty, Electric, Hydraulic Submersible, Wellpoint, Air Operated Double Diaphragm, Submersible Sewage, Submersible Dewatering 48 HIGH VOLUME DIESEL PUMP
More informationHWB Series GENERAL PUMP. Hydraulic Drive Triplex Plunger Pump INDUSTRIAL INDUSTRIAL FEATURES
GENERAL PUMP HWB Series Hydraulic Drive Triplex Plunger Pump FEATURES INDUSTRIAL INDUSTRIAL Innovative drive design eliminates need for auxiliary hydraulic drive Forged brass manifold Built-in Pump Thermal
More informationLine Body Canopy and Accessories:
ATTACHMENT A Heavy Crew Truck Line Body and Accessories Installation. TMWA provided cab & chassis specifications are provided on last page The Cab & Chassis will be a Freightliner (All Other Items Referenced
More informationIC-35-D. Engineering Spec. Page 1 of 8 Date: June 2006
Engineering Spec IC-35-D Page 1 of 8 Replaces: Form HD14D Dated: May 24 BMC s IC-35-2D is a Self-Propelled Industrial Crane designed for in-plant lifting and material handling applications. It has special
More informationRosedale Model HSS300 and HSS750 Single Cartridge Housings for Liquids
H S S S I N G L E C A R T R I D G E H O U S I N G S Rosedale Model HSS0 and HSS750 Single Cartridge Housings for Liquids Precision Machined Knife-Edge Seal The Rosedale Model HSS single element filter
More informationPROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL
PROJECT MANUAL GUIDE SPECIFICATIONS FOR: PFANNENBERG SERIES EB COMPACT PACKAGED CHILLERS PART 1 GENERAL 1.1 SUMMARY A. Packaged Chillers offer a self-contained means of producing cooling liquid primarily
More informationRX-700E TORSIONAL COUPLING AND CENTER SECTION CAMPAIGN
RX-700E TORSIONAL COUPLING AND CENTER SECTION CAMPAIGN PARTS LIST: 259230-01: TORSIONAL COUPLING 205752-03-C2-49: CENTER SECTION 205753-03-C2-2: RADIAL SEAL THE FOLLOWING PROCEDURE EXPLAINS THE STEPS REQUIRED
More informationServices. Rental Equipment RENTAL DIVISION PRODUCT LINES. LOAD RESTRAINTS Load Binders (Lever & Ratchet) Truck Tie-down Assemblies Boomer Chains
RENTAL DIVISION PRODUCT LINES In a continuing effort to give the customer the opportunity to get an assortment of equipment, services and products from one supplier, our rental division was established
More informationProduct Data. Features/Benefits. 42BH System Fan Coil. 800 to 4000 Cfm
Product Data 42BH System Fan Coil 800 to 4000 Cfm Satisfy All Your Design Requirements with Carrier s Versatile 42BH Fan Coil Unit A selection of 6 sizes covers capacities from 800 to 4000 cfm Choice of
More information47,000 Ib ( kg) maximum lifting capacity. 101 (30.78 m) maximum sheave height. 144 (43.89 m) maximum sheave height with (
Boom Truck Crane TRUCK CRANE FEATURES 47,000 Ib (21 319 kg) maximum lifting capacity 101 (30.78 m) maximum sheave height 144 (43.89 m) maximum sheave height with 26-44 (7.92-13.41 m) jib 29-92 (8.84-28.04
More informationCall Toll Free GO ALTEC
presents A.B. Chance Call Toll Free 9002-00013 09/05 A. B. CHANCE Company Mechanical Hoists...........................................................p 3 Powered Hoists...........................................................p
More informationIndustrial Pumping Equipment PowerMaster III
PowerMaster III Features State-of-the-art, fully pneumatic air motors, 3, 4, 6, 8 inches (76, 101, 152, 203 mm) diameter. Full six-inch stroke for greater output per cycle. Modular design for easy repair.
More information10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
More informationDisc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
More informationCustom Shipyard and Military Facility Products
Custom Shipyard and Military Facility Products Safety Products Designed for Special Applications Respiratory Protection, Confined Space Ventilation and Portable Area Lighting Off the Shelf Or Custom Solutions
More informationTo learn more about this model, call or visit giuffre.com today! GIUFFRE.COM. 34,000 Ib ( kg) maximum lifting capacity
Boom Truck Crane TRUCK CRANE FEATURES 34,000 Ib (13 607 kg) maximum lifting capacity 80 (24.38 m) maximum sheave height 120 (36.57 m) maximum sheave height with 24-40 (7.31-12.19 m) jib 27-70 (82.30-21.34
More informationMITSA INTERNATIONAL P.O.
POWER SOURCE The power source is a diesel or gasoline powered engine with a 12 volt electrical system; alternator and battery; heavy duty air cleaner; fuel pump; heavy duty radiator; engine housing. Cruise
More informationTurn On Your EnPak. EnPak.com. Turn Off Your Truck... EnPak Mechanic Series. A revolutionary, fully integrated power system for mechanic s trucks
Turn Off Your Truck... Turn On Your EnPak A revolutionary, fully integrated power system for mechanic s trucks EnPak Mechanic Series Designed for mechanics trucks, EnPak is a powerhouse combination of
More informationMATERIALS HANDLING MATERIALS HANDLING
7 MATERIALS HANDLING SPREADER BAR END CAPS & EQUALISERS...142 SPREADER BARS...143 CONTAINER LIFTERS 20 & 40FT...144 PERSONNEL WORK CAGES...145 LOAD ROLLERS & LOAD SKATES...146 HAND PALLET TRUCK & LIFTING
More informationMRO Systems and Retrofits for Industrial & Manufacturing Applications
www.cmafh.com MRO Systems and Retrofits for Industrial & Manufacturing Applications Hello! Are you aware that CMAFH serves the MRO industry with custom designed systems and retrofits relating to fluid
More informationWALKIE HYDRAULIC SYSTEMS
WALKIE HYDRAULIC SYSTEMS B60Z [A230]; B80Z [A233]; C60Z [A478]; C80Z [A479]; W60Z [A231]; W65Z [A229]; W80Z [A234]; B60Z AC [B230]; B80Z AC [B233]; C60Z AC [B478]; C80Z AC [B479] PART NO. 1500201 1900
More informationINLINE 1100 COMPACT, MULTI-PUMP SYSTEM. franklinwater.com
INLINE 0 COMPACT, MULTI-PUMP SYSTEM The Franklin Electric Inline 0 SpecPAK Pressure Boosting System connects easily to nearly any commercial, industrial, or multi-residential plumbing configuration to
More informationBELL FIRE ENGINEERS PVT. LTD.
BELL FIRE ENGINEERS PVT. LTD. FIREBELL Portable Fire Pump PORTABLE FIRE PUMP (DIESEL) PORTABLE FIRE PUMP (PETROL) Portable Fire Pump ( Diesel ) 275 LPM @ 4.5 Bar Maximum Pressure :- 6.0 Bar Maximum Discharge
More informationAir Boss Model M3000. Industrial Air Cleaner READ AND SAVE THESE INSTRUCTIONS. TRION
READ AND SAVE THESE INSTRUCTIONS Air Boss Industrial Air Cleaner TRION www.trioniaq.com Industrial Air Cleaner AIR BOSS M3000 TABLE OF CONTENTS Specifications...3 Principles of Operation...3 New Unit Inspection...3
More informationHPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.9 DISPLACEMENT
More informationHPV-10 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 1 9 8 7 6 bar 34 69 13 138 172 27 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 1.26 DISPLACEMENT
More informationInstallation Instructions
GEMINI SELECT 38APS025-065, 38APD025-130 Air-Cooled Condensing Units with PURON Refrigerant (R-410A) 50/60 Hz Installation Instructions CONTENTS Page SAFETY CONSIDERATIONS...................... 1 INSTALLATION................................
More informationClick. Campbell Fittings Table of Contents. on the section you want
Campbell Fittings Table of Contents Click on the section you want Contents Clips, Forged Wire Rope Eyebolts Eyes, Lifting Hooks, Grab/Slip Hooks, Hoist Hooks, Latch Kits For Links Links, Clevis Links,
More informationSECTION 6 PARTS LIST
SECTION FIGURE NO. DESCRIPTION PAGE NO. -1 - - -4-5 - - -8-9 Oven Panels, Window and Legs Exploded Drawing Air Finger Exploded Drawing Control Panel Exploded Drawing Blower and Shroud Exploded Drawing
More informationBASE CAMPS COMPLETE CAMP PACKAGE
BASE CAMPS COMPLETE CAMP PACKAGE Generators - 25 KW to 2 Megawatts Air Conditioning and Heating Tents & Living Quarters Full Service Catering Refrigerated Storage Fuel Storage Tanks - 200 to 20,000 Gallons
More informationB Pump Mounting. Page 1 of 7
www.wildlandwarehouse.com P.O. Box 425 Blairstown, NJ 07825 Ph 1.866.WILDLAND Fx 908.362.6236 October 18, 2012 Specifications for our Standard 50, 75 or 100 gallon UTV Fire Suppression Skid Unit L Shaped
More information85-TON POWER SWIVELS. Gooseneck Trailer-Mounted Unit, side view
Overview The hydraulic motor-driven, Logan 85-Ton Power Swivel provides smooth, shock-free torque. It is rated to support tensile pipe loads of 85 tons at zero rpm and 45 tons of dynamic load at 100 rpm.
More informationMASTER COALESCER JR & PORTABLE MASTER COALESCER JR AIR PUMP MODEL INSTALLATION MANUAL
MASTER COALESCER JR & PORTABLE MASTER COALESCER JR AIR PUMP MODEL INSTALLATION MANUAL INSTALLATION: CHOOSING THE LOCATION: Locate the coalescer as near to the intended point of use as possible. Avoid high
More informationINLINE 1100 COMPACT, MULTI-PUMP SYSTEM
INLINE 00 COMPACT, MULTI-PUMP SYSTEM The Franklin Electric Inline 00 SpecPAK TM Pressure Boosting System connects easily to nearly any commercial, industrial, or multi-residential plumbing configuration
More informationSpool Valve Hydraulic Motors. Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds.
Spool Valve Hydraulic Motors Spool Valve motors incorporate the proven orbit motor principle to provide high torque at low speeds. B-i Spool Valve Motors Highlights Product Description Char-Lynn spool
More information" " Series Variable Displacement Piston Pumps
" " Series Variable Displacement Piston Pumps AR Axial Port Type AR Side Port Type "AR" series variable displacement pump has been developed which the aim of even further the quientness in operation, smaller
More informationEnvironmental Primary & Secondary Containment
Environmental Primary & Secondary Containment INDEX Spill Berms (Any Size or Dimension) 1. Freedom Berm Series I, Drive Through End Walls A Side Walls 3 2. Freedom Berm Series II, Drive Through End Walls
More informationBuying Your First Crane? Here s What You Need to Know
Buying Your First Crane? Here s What You Need to Know Author Jim Finkle December, 2018 In the image above, the biggest crane is a 15 Ton model that is 24 feet tall with a 35-ft span. The next size crane
More informationVibrator Kit. Stainless Steel & Poly Hopper Spreaders with FLEET FLEX Electrical System
October 1, 2016 Lit. No. 95098, Rev. 01 PARTS LIST Vibrator Kit Stainless Steel & Poly Hopper Spreaders with FLEET FLEX Electrical System 5 7 6 9 8 4 1 10 2 3 99504 1 Vibrator Kit Item Part Qty Description
More informationOperation & Service Manual
Operation & Service Manual Model: 08-4048-0013 05/2008 - Rev. 01 Includes Illustrated Parts List 1740 Eber Rd Tronair, Inc. Phone: (419) 866-6301 Holland, OH 43528-9794 www.tronair.com 800-426-6301 USA
More informationStackable Storage & Dispensing Systems
Stackable Storage & Dispensing Systems VE AUTOMOTIVE AUTOMOTIVE AUTOMOTIVE AUTOMOT RAL AGRICULTURAL AGRICULTURAL AGRICULTURAL AGR INDUSTRIAL INDUSTRIAL INDUSTRIAL INDUSTRIAL IND Since 2007, Rhino Tuff
More informationRT-300-B. Tech Spec. Preliminary Information. * 30,000 pounds capacity at 10 ft. radius. * 4-wheel drive. * 4-wheel steer
Tech Spec RT-300-B * 30,000 pounds capacity at 10 ft. radius * 4-wheel drive * 4-wheel steer * 360 degree continuous rotation * 60 ft. of full power main boom reach RT-300-2B CAPACITIES APPLY TO OPERATION
More informationWARNING: Do not use pumps for gasoline or highly flammable products! Do not use pumps for water based fluids, solvents or chemicals!
50:1 Value Line Pneumatic Grease Pump Technical Brief 07/01/2010 No. 18710 201 Fits 35 lb. Pail Premium quality pneumatic pump used for 35 lb. Pail 1.Recommended Usage Grease pumps with a ratio of 50:1
More informationHAUSMANN MOST POPULAR
HAUSMANN MOST POPULAR TREATMENT TABLES A. Model 4002 A. Series 4002 H-brace is recessed into table leg with unique 4-sided Lock-Tite joint. High pressure laminate legs, apron and stretchers. B. Model 4024
More informationSECTION 12. Lifting & Spreader Beams
SECTION Lifting & Spreader Beams Lifting beams and spreader bars are below the hook equipment that facilitates safe lifting by spreading the attachment points and allowing for better sling angles. Even
More informationHPV-15 AXIAL PISTON PUMPS
SPECIFICATIONS Variable Displacement, Pressure Compensated OVERALL EFFICIENCY EFFICIENCY - % 100 90 80 70 60 bar 0 34 69 103 138 172 207 241 TYPICAL PERFORMANCE SPECIFICATIONS VOLUMETRIC cu. in./rev. 2.09
More informationSPECIFICATIONS FOR GASOLINE DRIVEN ENGINE ULTRA HIGH PRESSURE FIRE FIGHTING SYSTEM B1000 M-G
SPECIFICATIONS FOR GASOLINE DRIVEN ENGINE ULTRA HIGH PRESSURE FIRE FIGHTING SYSTEM B1000 M-G Scope and General Design Requirements A firefighting system shall be provided for offensively attacking a fire.
More informationM-B Companies, Inc. Specification. Model 245. Self Propelled Intermediate Striper. High Pressure Airless. Options. Revised September 27, 2006
M-B Companies, Inc. Administration Pavement Marking Equipment Divisions 1615 Wisconsin Avenue EAST COAST DIVISION WEST COAST DIVISION P.O. Box 200 79 Montgomery Street 2490 Ewald S.E. New Holstein, WI
More informationLUBRICATION & FLUID HANDLING ACCESSORIES. Heavy duty knurled steel barrel with large threads for easy loading.
hand grease guns Lever type The tough high pressure cast iron head makes Pro-Master Grease Guns unique in comparison to common pot metal or other die cast heads with a head burst pressure of 17,000 PSI
More informationLK4000 MOTOR CITY LIFT KING
LK4000 MOTOR CITY LIFT KING Main Component Assembly Guide www.prolinetoolsupply.com (989) 315-8946 2 IMPORTANT SAFETY INSTRUCTIONS 3 LK4000 DESCRIPTION & BENEFITS 4 BEFORE ASSEMBLY (BASIC ASSEMBLY TIPS)
More informationFIREWOOD PROCESSORS. WP200 Series Tractor PRODUCT FEATURES
FIREWOOD PROCESSORS WP200 Series Tractor PRODUCT FEATURES Auto Cycle Ergonomic Controls Adjustable 4-Way Wedge Adjustable Exit Chute Cylinder Cover Adjustable Log Length Guide WP240 25 24" $9,571 Split
More information2 0 1 7 D E F E Q U I P M E N T C ATA L O G 608-487-9770 www.hartlandlubes.com TD1 Features & Benefits: Great performance and quiet operation Self priming Stainless steel motor shaft Polypropylene housing
More informationWash Down Little Champ Hydraulic Power Units
Wash Down Little Champ Hydraulic Power Units Whats The Purpose of a Wash Down Little Champ Power Unit? * Provide a Power Unit Base For Food Industry Or Other Similar Applications That Require Pressurized
More information$87995Reg Dlr. $1344
3 TON LOW PROFILE PROFESSIONAL FLOOR JACK 300T Low pick up point of 3.75 High height of 21.5 Universal joint technology for precise release valve control Plungers use a U Cup design instead of O ring,
More informationTECHNICAL GUIDE FLEXIBLE LIGHT COMMERCIAL UNIT CHAMPION SERIES (WORLD 50 HZ) SINGLE PACKAGE COOLING UNITS D1EB036, 048 AND 060 3, 4 & 5 NOMINAL TONS
TECHNICAL GUIDE CHAMPION SERIES (WORLD 50 HZ) SINGLE PACKAGE COOLING UNITS D1EB036, 048 AND 060 3, 4 & 5 NOMINAL TONS FLEXIBLE LIGHT COMMERCIAL UNIT GENERAL York s Champion package units are designed to
More informationPARTS MANUAL THIS PAGE INTENTIONALLY LEFT BLANK. Ag-Bag International, Ltd. G7000 June Appendix A
The parts manual is organized into groups, it is designed to make the locating of parts easier. The exploded drawings also show assembly paths. All parts listed are available from your authorized Ag-Bag
More information55-Gallon Powder Drum Truck
Instruction Sheet P/N 0 0 -Gallon Powder Drum Truck for Bulk-Feed Powder Transfer Systems Description See Figure. The -gallon powder drum truck automatically adds bulk powder to a powder coating system
More informationHydraulic Test Equipment For A350 (Pre-Fal) >HTE350<
Hydraulic Test Equipment For A350 (Pre-Fal) HYDRAULICS >HTE350HAM< Hamburg >HTE350GTF< Getafe >HTE350SEL< Saint-Éloi >HTE350STD< Stade >HTE350BRE< Bremen >HTE350BRO< Broughton >HTE350SNZ< Saint-Nazaire
More informationWebtrol s Family of Pumps
www.webtrol.com Webtrol s Family of Pumps Vertical Series Booster Pumps Stainless Steel Multistage Centrifugals The Webtrol V Series multistage pumps offer technically advanced designs to meet market demands
More informationFixed Displacement Gear Pumps
Fixed Displacement Gear Pumps D/H/HD Series Introduction Series D/H/HD Features Pressure-loaded design Efficient, simple design - few moving parts Exceptionally compact and lightweight for their capacity
More informationWORKING TOGETHER FOR A BETTER SOLUTION ELECTRIC MOTORS C FLANGES - DIRECT MOUNT & AC/DC - POWER UNITS HCHYDROCUSTOM.COM
WORKING TOGETHER FOR A BETTER SOLUTION ELECTRIC MOTORS C FLANGES - DIRECT MOUNT & AC/DC - HCHYDROCUSTOM.COM ELECTRIC MOTORS ELECTRIC MOTORS TEFC MOTORS CHOICE OF 1/3 TO 20HP 1800 RPM (3600 RPM AVAILABLE)
More informationPyrolance, LLC SPECIFICATIONS FOR DIESEL ENGINE DRIVEN ULTRA HIGH PRESSURE FIRE FIGHTING SYSTEM B2000 M-D
SPECIFICATIONS FOR DIESEL ENGINE DRIVEN ULTRA HIGH PRESSURE FIRE FIGHTING SYSTEM B2000 M-D 1 HIGH PRESSURE FIRE FIGHTING SPECIFICATIONS Scope and General Design Requirements A fire fighting system shall
More information