S0300-BV-CAT-020 FLOATING HOSE SYSTEM. System - P P08100 System Overview 10/6/ :03:46 PM

Transcription

1 P08100 System Overview Page 1

2 The Floating Hose System P08100 consists of four, 20-foot storage/shipping vans, 5000 feet of 6" x 100' layflat floating hose, a 22-cfm diesel air compressor, a 300-cfm hydraulic air compressor, a single phase 240-V ac 9-kW diesel generator, a diesel hydraulic power unit, five floating hose reels, a pig launcher, a pig catcher, and the necessary ancillary equipment to deploy and maintain the system. The ancillary equipment is stored in wire baskets, which are stored in the storage/shipping vans. The floating hose system is used to discharge oil from a vessel casualty and transfer it to receiving tankers or barges when it is not possible to bring lightering vessels alongside. System Components for ESSM No Nomenclature Type Qty NS Cont VA2150 VAN, FLOATING HOSE SYSTEM (VAN 1 OF 4) BL 1 Y AC0501 AIR COMPRESSOR, PSI, DIESEL Contents 1 AC0500 AIR COMPRESSOR, PSI, DIESEL ALTN CP3000 CONTAINMENT POOL, MCHRY, 5' X 5' X 12" Contents 3 CP3020 CONTAINMENT POOL, 6' X 4' X 12" ALTN GE0470 GENERATOR, 9-KW, DSL, 240-VAC, 1-PH Contents 1 HC0005 PIG LAUNCHER FOR FLOATING HOSE SYSTEM P081 Contents 1 HC0006 PIG CATCHER FOR FLOATING HOSE SYSTEM P0810 Contents 1 PC0816 POOL, CLEANING, 12' X 12' Contents 1 PW0020 POWER UNIT, HYD, MOD 9, DIESEL, Contents 1 PW0012 HYDRAULIC POWER UNIT, HT20DQP, ALTN Y CP3000 CONTAINMENT POOL, MCHRY, 5' X 5' X 12" NC 1 CP3020 CONTAINMENT POOL, 6' X 4' X 12" ALTN PW0013 SPARE PARTS KIT FOR PW0012 NC 1 PW0108 POWER UNIT, HYD, MOD 2, DIESEL, ALTN VA2151 VAN, FLOATING HOSE SYSTEM (VAN 2 OF 4) BL 1 VA2152 VAN, FLOATING HOSE SYSTEM (VAN 3 OF 4) BL 1 Y RL0031 REEL, FLOATING HOSE Contents 3 VA2153 VAN, FLOATING HOSE SYSTEM (VAN 4 OF 4) BL 1 Y AC0700 AIR COMPRESSOR, PSI, HYD DRIV Contents 1 CP3010 CONTAINMENT POOL, MCHRY, 10' X 6' X 12" Contents 1 RL0031 REEL, FLOATING HOSE Contents 2 Baseline verified on 7/3/2018, * Not shown in catalog. P08100 Alternates Page 2

3 ESSM - VA2150 VAN, FLOATING HOSE SYSTEM (VAN 1 OF 4) Floating Hose System Van VA2150 (Van 1 of 4) The Floating Hose System Van VA2150 is a 20-foot van used for the storage and shipping of the major components and ancillary equipment of the Floating Hose System. Van #1 contains a 22-Cfm Diesel Air Compressor AC0501, a Single Phase, 240-V ac, 9-kW Diesel Generator GE0470, a Mod 9 Diesel Hydraulic Power Unit PW0020, a Pig Launcher HC0005, a Pig Catcher HC0006, four 16" Polyester Roundslings, adapters, fittings, protective clothing, spare parts, and tools to maintain the Floating Hose System. ESSM Facility VA2150 Shipping Length 20 ft, 0 in Width 8 ft, 0 in Height 8 ft, 0 in Cube 1280 cu ft Footprint 160 sq ft Weight lb Page 3

4 References Ref No Reference 1 None Page 4

5 ESSM - AC0501 AIR COMPRESSOR, PSI, DIESEL Air Compressor AC0501 The Air Compressor AC0501 is a two-stage, high volume unit that provides 19 cfm of compressed air at 125 psig. The air compressor is powered by a 1-cylinder, 6.2-hp diesel engine, which has its own fuel supply tank. The engine is designed to operate at a continuous speed of 3600 rpm for long periods of time. The engine and compressor are enclosed in a protective frame that is mounted on top of a 30-gallon air storage tank with wheels, which allows for easy maneuverability. Air Compressor Assembly Emglo Products GC8YDA-17F Air Compressor Emglo Products JU Capacity 19 cfm Rated operating pressure 125 psi Cylinders 2 Stages 2 Page 5

6 Rpm 875 Storage tank 30 gallons Operating pressure range 100 to 120 psig Engine Yanmar L60 Cylinders 1 Bore 2.95 in Stroke 2.44 in 2.44 in Displacement 16.7 cu in Rpm (continuous) 3600 Compression ratio 20 : 1 Starting Elec./recoil Battery 12 V dc Fuel Diesel Fuel consumption 0.5 gph Shipping Operating Length 3 ft, 10 in 3 ft, 10 in Width 2 ft, 1 in 2 ft, 1 in Height 3 ft, 0 in 3 ft, 0 in Cube 24 cu ft 24 cu ft Footprint 8 sq ft 8 sq ft Weight 420 lbs 420 lbs References Ref No Reference 1 Yanmar Diesel Engine Operation Manual for L-Series Engine 2 Emglo Parts Price List J 288 Page 6

7 ESSM - AC0500 AIR COMPRESSOR, PSI, DIESEL 14 CFM 100 PSI Diesel Air Compressor The Air Compressor AC0500 is a diesel-powered, 14-cfm, air-cooled, single-stage, 4-cycle air compressor. The air compressor is used for boom inflation, operation of pneumatic-powered tools, and other needs that require low pressure, low volume air. Air Compressor Assembly Emglo Products 22C125P17E Air Compressor Emglo Products LCU Cylinders 4 Stage Single Bore/stroke 2 1/2 in/2 in Displacemen 13.6 cu in Pressure 100 psi Rpm 1725 Page 7

8 Cooling Air Engine Teledyne Wisconsin Motor WD1-436 Cylinders 1 Cooled Air Cycle 4 Starter Electric generator/hand crank Battery 12 V dc Fuel Diesel Fuel consumption 0.5 gph Shipping Operating Length 3 ft, 6 in 3 ft, 6 in Width 2 ft, 1 in 2 ft, 1 in Height 3 ft, 0 in 3 ft, 0 in Cube 22 cu ft 22 cu ft Footprint 8 sq ft 8 sq ft Weight 405 lbs 405 lbs References Ref No Reference 1 Wisconsin Diesel Engine Parts Catalog, MM Emglo Products Corp. Parts List, L-983 Page 8

9 ESSM - CP3000 CONTAINMENT POOL, MCHRY, 5' X 5' X 12" 5' x 5' x 12" Machinery Containment Pool CP3000 (Shipping Configuration) 5' x 5' x 12" Machinery Containment Pool CP3000 (Operational Configuration) Page 9

10 The Machinery Containment Pool CP3000 is a 5' x 5' x 12" urethane berm. It is used to provide a means of catching and containing any oil, fuel, or contaminants leaking or spilled from the component that it is supporting. Basic Concepts A Shipping Operating Length 1 ft, 8 in 5 ft, 0 in Width 1 ft, 8 in 5 ft, 0 in Height 0 ft, 10 in 1 ft, 0 in Cube 3 cu ft 25 cu ft Footprint 3 sq ft 25 sq ft Weight 40 lbs 40 lbs References Ref No Reference 1 None Page 10

11 ESSM - CP3020 CONTAINMENT POOL, 6' X 4' X 12" 6' X 4' X 12" Containment Pool CP3020 The Machinery Containment Pool CP3020 is a 6' x 4' x 12" urethane berm. It is used to catch and contain any oil, fuel, hydraulic fluid, or contaminants leaking or spilled from diesel powered or hydraulically driven components. Basic Concepts A Shipping Operating Length 2 ft, 3 in 6 ft, 0 in Width 2 ft, 4 in 4 ft, 0 in Height 0 ft, 8 in 1 ft, 0 in Cube 4 cu ft 24 cu ft Footprint 6 sq ft 24 sq ft Weight 35 lbs 35 lbs Page 11

12 References Ref No Reference 1 None Page 12

13 ESSM - GE0470 GENERATOR, 9-KW, DSL, 240-VAC, 1-PH 9-kW Diesel Generator GE0470 The 9-kW Diesel Generator GE0470 is a self-contained unit surrounded by a protective steel frame. Mounted on the frame are wheels and handles that allow for easy maneuverability. The unit is driven by an aircooled, four-cycle, two-cylinder diesel engine. The generator can supply up to 9-kW single phase ac power at 120 or 240 volts. The 120- and 240-volt, single phase electrical power is distributed via one 4-prong, 120/240- volt twist-lock outlet; one 3-prong, 120-volt, twist-lock outlet; and two 120-volt, duplex ground fault interrupter (GFI) outlets located on the front panel of the generator. The outlets are protected by two 35-ampere breakers, located above the outlet panel. Generator Assembly Gillette Manufacturing GPD-90E Type AC Capacity 9 kw Frequency rpm Voltage: 120 V ac, single phase 240 V ac, single phase Amperage: volts volts Page 13

14 Engine Deutz-Ruggerini Deutz-Ruggerini No. cylinders 2 Horsepower 6.6 Rpm 3600 Starting system 12 volts Fuel Diesel Fuel consumption 1.2 gph Fuel source 5-gal. internal tank Shipping Operating Length 3 ft, 6 in 3 ft, 6 in Width 2 ft, 7 in 2 ft, 7 in Height 3 ft, 6 in 3 ft, 6 in Footprint 10 sq ft 10 sq ft Cube 32 cu ft 32 cu ft Weight 405 lbs 405 lbs References Ref No Reference 1 Gillette Manufacturing Owner s Manual for Brushless Generators Page 14

15 ESSM - HC0005 PIG LAUNCHER FOR FLOATING HOSE SYSTEM P08100 Pig Launcher HC0005 The Pig Launcher HC0005 consists of a 6-inch manifold assembly that, when connected to the floating hose, will launch a 6-inch cleaning pig into the floating hose. The pig will then clear the floating hose of product. The pig launcher is used in conjunction with the 300-Cfm Hydraulic Air Compressor AC0700, which is used to provide sufficient air pressure to force the pig through the entire length of the floating hose. ESSM Facility HC0005 Shipping Length 4 ft, 11 in Width 3 ft, 0 in Height 2 ft, 2 in Cube 32 cu ft Footprint 13 sq ft Weight 330 lbs Page 15

16 References Ref No Reference 1 GPC Sketch SK0388, Pig Launcher Page 16

17 ESSM - HC0006 PIG CATCHER FOR FLOATING HOSE SYSTEM P08100 Pig Catcher HC0006 The Pig Catcher HC0006 has a 6-inch manifold assembly that, when connected to the floating hose, will recover the 6-inch cleaning pig after the pig has cleared the floating hose of product. ESSM Facility HC0006 Shipping Length 6 ft, 7 in Width 3 ft, 5 in Height 2 ft, 2 in Cube 49 cu ft Footprint 23 sq ft Weight 385 lbs Page 17

18 References Ref No Reference 1 GPC Sketch SK0406, Pig Catcher Page 18

19 ESSM - PC0816 POOL, CLEANING, 12' X 12' Cleaning Pool PC0816 The 12' x 12' Cleaning Pool PC0816 is a rubber pool/berm that provides a means of catching and containing any oil, fuel, or contaminants cleaned from the equipment used during an oil spill cleanup. The pool/berm is able to contain the oil and chemicals from the equipment until it can be pumped out and transported to a disposal site. Carolina Boom Material 32 oz. Cooley Urethane Shipping Operating Length 2 ft, 10 in 12 ft, 0 in Width 1 ft, 5 in 12 ft, 0 in Height 0 ft, 11 in 1 ft, 0 in Cube 4 cu ft 144 cu ft Footprint 5 sq ft 144 sq ft Weight 50 lbs 50 lbs Page 19

20 References Ref No Reference 1 None Page 20

21 ESSM - PW0020 POWER UNIT, HYD, MOD 9, DIESEL, PSI Mod 9 Hydraulic Power Unit PW0020 (Front View) Mod 9 Hydraulic Power Unit PW0020 (Right Side View) Page 21

22 The Mod 9 Hydraulic Power Unit (HPU) PW0020 is a portable, diesel driven unit that provides hydraulic fluid up to psi. An adjustable pressure relief valve controls the output pressure delivered to the supply circuit. The HPU is mounted on a wheeled frame and is enclosed in a protective steel housing with four sling points on the external steel tubing frame. Hydraulic connections are made via Aeroquip 5600, -12 series male and female quick disconnect fittings for the hydraulic supply and return, with a 3/8-inch case drain fitting. The unit is shipped with the exhaust muffler attached to the side of the HPU housing, and the muffler is installed prior to operation of the unit. Hydraulic Power Unit Assembly PortaCo Hydraulic Power D-17S10-15-W Diesel Engine Deutz-Ruggerini Series MD 191 Rpm 2200 Horsepower 3600 rpm Starting Electric, 12-volt Fuel Diesel Fuel consumption 1 gph Fuel source Internal 4-gal fuel tank or external tank using installed fuel pickup Hydraulic Pump Sauer-Sundstrand SNP 2/11 Type Gear Flow psi Hyd. reservoir 5 gal Fluid type Rando 46 Shipping Operating Length 3 ft, 9 in 3 ft, 9 in Width 2 ft, 7 in 2 ft, 7 in Height 2 ft, 8 in 2 ft, 8 in Cube 26 cu ft 26 cu ft Page 22

23 Footprint 10 sq ft 10 sq ft Weight 475 lbs 475 lbs References Ref No Reference 1 Operation, Maintenance, and Repair Manual for PortaCo Hydraulic Power Unit, D-17S10-15-W 2 Deutz-Ruggerini Use and Maintenance Manual, Engine Type MD and MD Page 23

24 ESSM - PW0012 HYDRAULIC POWER UNIT, HT20DQP, PSI Hydraulic Power Unit PW0012 The PW0012 supplies hydraulic power to the Underwater Hydraulic Tool System S The portable hydraulic Power Unit (HPU) is capable of producing hydraulic power output of 13 gpm at 2400 psi. The unit is mounted on an aluminum tube base frame with welded aluminum fork slots and has a center located lifting point. The HPU is fully enclosed for sound attenuation, with the enclosure being resistant to water penetration. The unit is suitable for operation in harsh marine environments and was designed for reliability, adaptability, compactness, and ease of maintenance. The hydraulic power unit is powered by a 22-horsepower liquid cooled mini engine with a residential muffler. The HPU is housed in a wheel barrow style rolling frame mounted with aluminum main frame, with a carbon steel 9-gallon hydraulic reservoir and carbon steel 9-gallon fuel cell, with a gear type hydraulic pump, and hydraulic oil cooler. It has a panel mounted controls system with pressure gauges, access hatches for critical fluids, and sound attenuation enclosure. Hydraulic power unit assembly Hydro-Tech Pumps HT20DQP Engine Yanmar Page 24

25 3TNM72-ASA RPM 3,000 max Horsepower 23 Starting 12-V Fuel Diesel Fuel source 9 gallon internal tank Hydraulic Pump Casappa Polaris 20 (PLP Type Gear driven Flow Variable, max 13 gpm Pressure 2400 psi Hydraulic reservoir 9 gallons Fluid type Rando 46 Shipping Operating Length 4 ft, 7 in 4 ft, 7 in Width 3 ft, 3 in 3 ft, 3 in Height 3 ft, 5 in 3 ft, 5 in Cube 51 cu ft 51 cu ft Footprint 15 sq ft 15 sq ft Weight 960 lb 960 lbs References Ref No Reference 1 Hydra-Tech Operation and Maintenance Manual HT20DQP 2 Yanmar Engine Operation Manual OATNM-G Yanmar Parts Manual OCW10-G55300 Page 25

26 ESSM - CP3000 CONTAINMENT POOL, MCHRY, 5' X 5' X 12" 5' x 5' x 12" Machinery Containment Pool CP3000 (Shipping Configuration) 5' x 5' x 12" Machinery Containment Pool CP3000 (Operational Configuration) Page 26

27 The Machinery Containment Pool CP3000 is a 5' x 5' x 12" urethane berm. It is used to provide a means of catching and containing any oil, fuel, or contaminants leaking or spilled from the component that it is supporting. Basic Concepts A Shipping Operating Length 1 ft, 8 in 5 ft, 0 in Width 1 ft, 8 in 5 ft, 0 in Height 0 ft, 10 in 1 ft, 0 in Cube 3 cu ft 25 cu ft Footprint 3 sq ft 25 sq ft Weight 40 lbs 40 lbs References Ref No Reference 1 None Page 27

28 ESSM - CP3020 CONTAINMENT POOL, 6' X 4' X 12" 6' X 4' X 12" Containment Pool CP3020 The Machinery Containment Pool CP3020 is a 6' x 4' x 12" urethane berm. It is used to catch and contain any oil, fuel, hydraulic fluid, or contaminants leaking or spilled from diesel powered or hydraulically driven components. Basic Concepts A Shipping Operating Length 2 ft, 3 in 6 ft, 0 in Width 2 ft, 4 in 4 ft, 0 in Height 0 ft, 8 in 1 ft, 0 in Cube 4 cu ft 24 cu ft Footprint 6 sq ft 24 sq ft Weight 35 lbs 35 lbs Page 28

29 References Ref No Reference 1 None Page 29

30 ESSM - PW0013 SPARE PARTS KIT FOR PW0012 Spare Parts Kit For PW0012 The Spare Parts Kit PW0013 contains the items necessary to support the operation and maintenance of one Hydraulic Power Unit PW0012. ESSM Facility PW0013 The kit contains the following major items: Container, w/lid, plastic 1 Belt, V, engine 1 Filter, air 1 Filter, engine oil 1 Filter, fuel 1 Filter, return hydraulic 1 Filter, water separator 1 Inventory, laminated 1 Page 30

31 Manual, Operation and Maintenance, HT20DQP Manual, Parts, Yanmar Engine 1 Manual, Yanmar engine operation 1 O-ring, QD, female, -10 locking 1 QD, male, Ring, back-up, -10 QD 2 Length Width Height Cube Footprint Weight References Ref No 1 None Reference Shipping 1 ft, 7 in 1 ft, 0 in 0 ft, 10 in 2 cu ft 2 sq ft 13 lb 1 Page 31

32 ESSM - PW0108 POWER UNIT, HYD, MOD 2, DIESEL, PSI Mod 2 Hydraulic Power Unit PW0108 The Mod 2 Hydraulic Power Unit PW0108 is a portable, diesel driven unit that provides hydraulic fluid up to psi. An adjustable pressure relief valve controls the output pressure delivered to the supply circuit. The HPU is mounted on a steel frame equipped with forklift slots and lifting points for handling during shipment and operation. Hydraulic connections are made via Aeroquip 5600, -12 series male and female quick disconnect fittings for the hydraulic supply and return, with a 3/8-inch case drain fitting. The unit is shipped with the exhaust muffler attached to the side of the HPU housing, and the muffler is installed prior to operation of the unit. Hydraulic Power Unit Assembly Commercial, Navy Design NAVSEA 2 Diesel Engine Onan Series DJC-MS/2450 Rpm 2400 Horsepower 2400 rpm Starting Electric, 12-volt Page 32

33 Fuel Diesel Fuel source Internal tank, 20-gal Fuel consumption rpm Hydraulic Pump Type Flow (maximum) Hyd. reservoir Vickers Inc. 30-H-10 Axial piston psi 55 gal Hydraulic fluid Rando 46 Shipping Shipping Operating w/hot tap machine Length 5 ft, 8 in 5 ft, 8 in 5 ft, 8 in Width 2 ft, 0 in 2 ft, 0 in 2 ft, 0 in Height 3 ft, 8 in 5 ft, 2 in 6 ft, 8 in Cube 42 cu ft 59 cu ft 76 cu ft Footprint 12 sq ft 12 sq ft 12 sq ft Weight 1762 lbs 2035 lb 2035 lb References Ref No Reference 1 Operation and Maintenance Instructions, Diesel Hydraulic Power Unit, NAVSEA 2, S9233-A-3- MM0-01B-0910-LP Page 33

34 ESSM - VA2151 VAN, FLOATING HOSE SYSTEM (VAN 2 OF 4) Floating Hose System Van VA2151 The Floating Hose System Van VA2151 is a 20-foot van used for the storage and shipping of the Floating Hose System mooring components. Van #2 contains eight 62" x 36" x 41" wire mesh storage baskets that contain anchors, anchor lines (approximately 14,000 feet total), anchor chains, anchor marker buoys, anchor marker lights, crown lines (approximately 3,000 feet total), and miscellaneous hardware, shackles and swivels. ESSM Facility VA2151 The van contains the following major items: Anchor, fluke, 15-lb FX23 60 Buoy, inflatable/polypro A-0/DWG Chain 1/2" x 10' Chain, 5/16" x 20' C-186/ Container, wire mesh, 62" x 36" x 41" 8 Float, marker light Hardware, misc (Shackles, Swivels) Page 34

35 Light, marker Line, polypro, 1/2" x 10'/20' (crown line) DWG Line, polypro, 3/4" x 3'/40'/80' (anchor l) DWG Shipping Length 20 ft, 0 in Width 8 ft, 0 in Height 8 ft, 0 in Cube 1280 cu ft Footprint 160 sq ft Weight lbs References Ref No Reference 1 None Page 35

36 ESSM - VA2152 VAN, FLOATING HOSE SYSTEM (VAN 3 OF 4) Floating Hose System Van VA2152 The Floating Hose System Van VA2152 is a 20-foot van used for the storage and shipping of the Floating Hose System and ancillary equipment. Van #3 contains three Floating Hose Reels RL0031 with ten sections of 6" x 100' Layflat Floating Hose HS0822 per reel, and eight wire storage baskets that contain anchors, anchor line, anchor chains, anchor marker buoys, and anchor marker lights. ESSM Facility VA2152 Shipping Length 20 ft, 0 in Width 8 ft, 0 in Height 8 ft, 0 in Cube 1280 cu ft Footprint 160 sq ft Weight lbs Page 36

37 References Ref No Reference 1 None Page 37

38 ESSM - RL0031 REEL, FLOATING HOSE Floating Hose Reel RL0031 (with hose) Nitrol SP Floating Hose Page 38

39 The Floating Hose Reel RL0031 is a skid-mounted and hydraulically powered hose reel. It is used to reel up and store floating hose and can store up to ten 6 x 100 sections. The Nitrol SP floating hose is a petroleumcompatible hose used to transfer oil from a casualty vessel to receiving tankers or barges when it is not possible to moor lightering vessels alongside. The floating hose reel is powered by a Mod 9 Hydraulic Power Unit PW0020 or equivalent alternate. Hose Reel: Cavotec HC3 Floating Hose: Hydrasearch/Titan Item number HOS B/SS542 Mil Spec MIL-H Hose I.D. 6 in Type B Proof pressure 300 psi Burst pressure 600 psi Dimensions: Inside diameter 6.00" Outside diameter 7.01" Min. tensile strength 16,000 lb Material Synthetic rubber tube w/braided yarn cover Operating temperature -40 to +150 F/-40 to +180 F Weight per foot 4 lb Couplings Aluminum, MIL-C Shipping Length 7 ft, 5 in Width 6 ft, 4 in Height 6 ft, 7 in Cube 309 cu ft Page 39

40 Footprint 47 sq ft Weight (w/10 sections of hose) 6410 lbs References Ref No Reference 1 None Page 40

41 ESSM - VA2153 VAN, FLOATING HOSE SYSTEM (VAN 4 OF 4) Floating Hose System Van VA2153 The Floating Hose System Van VA2153 is a 20-foot van used for the storage and shipping of the Floating Hose System and ancillary equipment. Van #4 contains a 300-Cfm Hydraulic Air Compressor AC0700, two Floating Hose Reels RL0031, with ten sections of 6" x 100' Layflat Floating Hose HS0822 per reel, and a tool box. ESSM Facility VA2153 Shipping Length 20 ft, 0 in Width 8 ft, 0 in Height 8 ft, 0 in Cube 1280 cu ft Footprint 160 sq ft Weight lbs Page 41

42 References Ref No Reference 1 None Page 42

43 ESSM - AC0700 AIR COMPRESSOR, PSI, HYD DRIVEN 300-Cfm Hydraulic Air Compressor AC0700 The 300-Cfm Hydraulic Air Compressor AC0700 is a rotary screw-type air compressor driven by a hydraulic motor. The air compressor is rated at psi discharge pressure. The hydraulic motor and compressor assembly is skid-mounted and surrounded by a steel frame. The base plate for the air compressor contains forklift pockets to facilitate handling. 300-Cfm Hydraulic Air Compressor AC0700 is designed to be operated with a Mod 8 Hydraulic Power Unit PW0200B, which must be obtained from a separate source. Air Compressor Assembly Ingersoll-Rand VHP300CM Type 2 Rated delivery 300 cfm Rated pressure 200 psi Operating pressure range 77 to 200 psig Discharge air temperature 185 to 248 F Hydraulic Motor Page 43

44 Mannesmann Rexroth AA2FM Horsepower (min.) 108 Speed (rpm) 2750 Shipping Operating Length 6 ft, 11 in 6 ft, 11 in Width 3 ft, 10 in 3 ft, 10 in Height 4 ft, 8 in 4 ft, 8 in Cube 124 cu ft 124 cu ft Footprint 27 sq ft 27 sq ft Weight 1870 lbs 1870 lbs References Ref No Reference 1 Operating, Maintenance, and Parts Manual, Ingersoll-Rand, VHP300CM Page 44

45 ESSM - CP3010 CONTAINMENT POOL, MCHRY, 10' X 6' X 12" CP3010 Folded Machinery Containment Pool CP3010 The Machinery Containment Pool CP3010 is a 10' x 6' x 12" urethane berm. It is used to provide a means of catching and containing any oil, fuel, or contaminants, leaking or spilled from the operating equipment it contains. Page 45

46 Basic Concepts A Shipping Operating Length 3 ft, 3 in 10 ft, 0 in Width 2 ft, 5 in 6 ft, 0 in Height 0 ft, 9 in 1 ft, 0 in Cube 6 cu ft 60 cu ft Footprint 8 sq ft 60 sq ft Weight 70 lbs 70 lbs References Ref No Reference 1 None Page 46

47 ESSM - RL0031 REEL, FLOATING HOSE Floating Hose Reel RL0031 (with hose) Nitrol SP Floating Hose Page 47

48 The Floating Hose Reel RL0031 is a skid-mounted and hydraulically powered hose reel. It is used to reel up and store floating hose and can store up to ten 6 x 100 sections. The Nitrol SP floating hose is a petroleumcompatible hose used to transfer oil from a casualty vessel to receiving tankers or barges when it is not possible to moor lightering vessels alongside. The floating hose reel is powered by a Mod 9 Hydraulic Power Unit PW0020 or equivalent alternate. Hose Reel: Cavotec HC3 Floating Hose: Hydrasearch/Titan Item number HOS B/SS542 Mil Spec MIL-H Hose I.D. 6 in Type B Proof pressure 300 psi Burst pressure 600 psi Dimensions: Inside diameter 6.00" Outside diameter 7.01" Min. tensile strength 16,000 lb Material Synthetic rubber tube w/braided yarn cover Operating temperature -40 to +150 F/-40 to +180 F Weight per foot 4 lb Couplings Aluminum, MIL-C Shipping Length 7 ft, 5 in Width 6 ft, 4 in Height 6 ft, 7 in Cube 309 cu ft Page 48

49 Footprint 47 sq ft Weight (w/10 sections of hose) 6410 lbs References Ref No Reference 1 None Page 49