VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
|
|
|
- Lydia Nicholson
- 6 years ago
- Views:
Transcription
1 VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE ISO nbr LRC QMS issued by L.R.Q.A. ATEX nbr issued by B.V. PED nbr COV /01 issued by L.R.V. ISO nbr I /1-/2 issued by TÜV CONSTRUCTION IN ACCORDING TO: BS EN ANSI B16.34 ISO EN 558 On request FIRE SAFE According to ISO ISO-FT BALL VALVES "WAFER " FULL BORE ROBINETS A BOULE WAFER PASSAGE INTEGRAL FLANSCHKUGELHÄHNE IN "KOMPAKTBAUWEISE" VOLLER DURCHGANG WEB SITE:
2 VALVOLA A SFERA "CORPO PIATTO" PASSAGGIO TOTALE BALL VALVES "WAFER " FULL BORE ROBINETS A BOULE "WAFER" PASSAGE INTEGRAL FLANSCHKUGELHÄHNE IN KOMPAKTBAUWEISE" VOLLER DURCHGANG CONSTRUCTION IN ACCORDING TO: BS EN ANSI B16.34 ISO EN 558 ACCOPPIAMENTO VALVOLA ATTUATORE CONNECTION VALVE ACTUATOR ACCOUPLEMENT ROBINET- ACTIONNEUR ZUSAMMENBAU KUGELHAHN ANTRIEB ISO-5211
3 N. 1 2 DESCRIZIONE BESCHREIBUNG CORPO BODY CORPS KÖRPER GHIERA INSERT EMBOUT GEWINDEDRUCKRING MATERIALI MATERIALS MATERIAUX WERKSTOFFE ASTM A105 ASTM A 182 F316- A479 S31600 ASTM A 182 F304- A479 S30400 ASTM A105 ASTM A 182 F316- A479 S31600 ASTM A 182 F304- A479 S30400 N. 9* 10* DESCRIZIONE BESCHREIBUNG BUSSOLA STEM SEAL JOINT TIGE UNTERE SPINDELABDICHTUNG PACCO A V CHEVRON RINGS JOINT A V 3 FACHE DACHMANSCHETTE MATERIALI MATERIALS MATERIAUX WERKSTOFFE P.T.F.E. P.T.F.E. / GRAFITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHIT 3* O-RING FKM (VITON) 11 4* 5* ANELLO SEAL ANNEAU DICHTUNGSRING SEDE RINFORZATA SEAT REINFORCED SIEGE RENFORCE SITZRING VERSTÄRKT SFERA BALL BOULE KUGEL DISPOSITIVO ANTISTATICO ANTISTATIC DEVICE CONTACT ANTISTATIQUE ANTISTATIK VORRICHTUNG STELO STEM TIGE SPINDEL P.T.F.E. 12 P.T.F.E. / ASTM A ASTM A182 F304-A479 S30400 ASTM A351 CF8 ASTM A182 F316-A479 S31600 ASTM A351 CF8M 14 ASTM A479 S ASTM A182 F304 A479 S30400 ASTM A182 F316 A479 S31600 DN PREMIBUSSOLA PRESSING BUSH PRESSE RONDELLE STOPFBUCHSDRUCKRING MOLLE A TAZZA SPRING WASHERS RONDELLES BELLEVILLE TELLERFEDERN VITE DI FERMO E FERMO PIN AND STOP PIN PLOT ET PLOT D ARRET ANSCHLAGBOLZEN DADO CONTRODADO NUT LOCK NUT ECROU CONTRE-ECROU MUTTER KONTERMUTTER LEVA WRENCH LEVIER HANDHEBEL ASTM A479 S31600 C72/50Cr V4 UNI UNI S UNI 5946 Fe 37 * RICAMBI CONSIGLIATI RECOMMENDED SPARE PARTS PIECES DE RECHANGE CONSEILLEES ERSATZTEIL EMPFEHLUNG DIMENSIONI DIMENSION DIMENSIONS ABMESSUNGEN DN A B C E F M5 M5 M6 M6 M8 ISO F03 F03 F05 F05 F07 G H L M N P R P R S T Kg 2,2 3,7 4,5 6,3 9,5 VEDERE SEE VOIR SIEHE FC2 DATI E CARATTERISTICHE SOGGETTI A VARIAZIONI SENZA PREAVVISO SPECIFICATIONS SUB JECT TO MODIFICATION WITHOUT PRIOR NOTICE TOUS DROITS DE MODIFICATION RESERVES KONSTRUKTIONSÄNDERUNGEN VORBEHALTEN PN ADLER SpA VALVOLE A SFERA S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com
4 VALVOLA A SFERA "CORPO PIATTO" PASSAGGIO TOTALE BALL VALVES "WAFER " FULL BORE ROBINETS A BOULE "WAFER" PASSAGE INTEGRAL FLANSCHKUGELHÄHNE IN KOMPAKTBAUWEISE" VOLLER DURCHGANG ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN ONLY FOR VALVES DN 50 FORO DI BILANCIAMENTO BALANCING HOLE TROU DE BALANCEMENT DRUCKENTLASTUNGSBOHRUNG EXECUTION 4-12 EXECUTION 6-16 STANDARD OPTIONAL ADLER UNA GAMMA COMPLETA PRIVILEGIANDO LA QUALITA A COMPLETE RANGE PRIVILEGING THE QUALITY -MONTAGGIO VITI SCREW ASSEMBLING -MONTAGE VIS EINBAU MIT SCHRAUBEN -STELO ANTI ESPULSIONE -TIGE ANTIEXPULSION -PACCO A V -JOINT A V ANTISTATIC DEVICE -ANTI BLOW OUT STEM -AUSBLASGESICHERTE WELLE -CHEVRON RINGS -3 FACHE DACHMANSCHETE ANTISTATIK VORRICHTUNG BS 5146 ISO CERTIFICATION BREVETTO PATENTED O RING STELO O RING ON STEM -TIGE AVEC O RING - O RING IM SPINDELBEREICH
5 VALVOLA A SFERA "CORPO PIATTO" PASSAGGIO TOTALE BALL VALVES "WAFER " FULL BORE ROBINETS A BOULE "WAFER" PASSAGE INTEGRAL FLANSCHKUGELHÄHNE IN KOMPAKTBAUWEISE" VOLLER DURCHGANG ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN -PROLUNGA STELO -STEM EXTENSION -TIGE PROLONGEE -SPINDELVERLÄNGERUNG -PARTICOLARI INOX -STAINLESS STEEL DETAILS -ACCESSOIRES EN INOX -EDELSTAHLTEILE -ATTACCO ISO -SYSTEM ISO - ISO FASTENING -ANSCHLUSS ISO LOCKING DEVICE OPEN OR CLOSE POSITIONS FIRE SAFE ISO ISO-FT (BS 6755 / API 607) -SFERA CONTENUTA CONTENTS BALL - BOULE CONTENUE -NICHT RAUSRAGENDE KUGEL VEDERE / SEE ANSI B DOPPIA TENUTA -DOUBLE ETANCHEITE DOUBLE SEALS -DOPPELTE ABDICHTUNG GHIERA A BATTUTA -METAL BEATING RING -EMBOUT AVEC BATTUE MECANIQUE -METALLSICHER ANSCHLAG DES GEWINDEDRUCKRINGS -FORO DI SCARICO NELLA SFERA -OVERPRESSURE HOLE INTO BALL -TROU DECOMPRESSION DANS LA BOULE -ENTLASTUNGSBOHRUNR IN DER KUGEL VALVOLA MONO DIREZIONALE MONO-DIRECTIONAL VALVE HARDNESS TOOL -FIRE SAFE ISO FT + O RING STELO -FIRE SAFE ISO FT + O RING ON STEM -SECURITE FEU ISO FT + TIGE AVEC O RING -FEUERSICHERE AUSFÜHRUNG ISO FT + O RING IM SPINDELBEREICH FIRE SAFE ISO FT CERTIFICATE THREAD GAUGES
6 VITI D ASSEMBLAGGIO PER ASSEMBLING SCREWS FOR VIS D ASSEMBLAGE POUR MONTAGESCHRAUBEN FÜR N VITI DIMENSIONE N SCREW DIMENSIONS N VIS- DIMENSIONS N SCHRAUBEN ABMESSUNGEN PN Rating Rating DN 63 8 M12 X M12 X M12 X35 Ø M14 Ø ½ x 1 3/4 EUROPEAN NORM X40 X40 X40 X55 ANSI METRIC (STANDARD ADLER) ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ X55 ANSI B1.1 UNC (ON REQUEST) ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ /8 x 1 3/4 8 5/8 x 2 8 5/8 x 2 8 ¾ x 2 1/4 ADLER SpA VALVOLE A SFERA S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2 issued
ROBINETS A BOISSEAU SPHERIQUE 3 VOIES WAFER PASSAGE INTEGRAL 90 AVEC ENVELOPPE KUGELHÄHNE "3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 90 MIT HEIZMANTEL
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE
PN 10-40 VALVOLE A SFERA UNI EN 558-1 SPLIT BODY PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE BW SW
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2
FN2 TYPE PN PN On request FIRE SAFE According to ISO ISO-FT
WWW.ADLERSPA.COM PN 10-40 PN 63-160 BALL VALVES UNI EN 558-1 FULL BORE SPLIT BODY ROBINETS A BOULE UNI EN 558-1 PASSAGE INTEGRAL 2 PIECES FLANSCHKUGELHÄHNE IN UNI EN 558-1 VOLLER DURCHGANG ZWEITEILIGES
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE B.W. S.W. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B NPT
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B NPT
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE
FB2 VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2
RT7 BALL VALVES "4 WAY" WITH X BALL ROBINETS A BOULE "4 VOIES" AVEC BOULE A X KUGELHÄHNE "4 WEGE" MIT X KUGEL TYPE PN
ISO 9001:2008 by L.R. WWW.ADLERSPA.COM BALL VALVES "4 WAY" WITH X BALL KUGELHÄHNE "4 WEGE" MIT X KUGEL ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOULE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90
ISO 9001:2008 by L.R. WWW.ADLERSPA.COM BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOULE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 ISO nbr LRC 0160281 QMS issued by L.R.Q.A.
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA ANSI B SPLIT BODY PASSAGGIO TOTALE
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7-1 ANSI B NPT S.W. B.W.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA UNI EN 558-1 SPLIT BODY
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE INGLINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA UNI
VALVOLE A SFERA 4 VIE CON SFERA A X
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 4
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE
ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE
ISO 9001:00 by L.R. PED DIR. 97/3/EC by L.R. ISO 154 by TÜV FA NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO SPLIT BODY
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO SPLIT BODY
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO SPLIT BODY
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:
ISO 9001:2008 by L.R. FT4 PN 10 40 ANSI 150 300* NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
ISO 9001:00 by L.R. PED DIR. 97/3/EC by L.R. ISO 154 by TÜV FX NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf
Features BALL VALVES. Split Wafer. Carbon steel wafer PN ANSI 600 STANDARD FEATURES FEATURES ON REQUEST
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
Features BALL VALVES. Thor Split Body Stainless steel PN ANSI 600 STANDARD FEATURES CERTIFICATIONS ENGINEERING STANDARD
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 250 mm Between flanges PN16/40-28 C + 200 C Max Pressure : 40 Bars up to DN80, 16 bars over Specifications : With ISO 5211 mounting pad Contents
Valvola a sfera sanitaria manuale. Manual sanitary ball valve
Valvola a sfera sanitaria manuale Manual sanitary ball valve Valvola a sfera sanitaria manuale Manual sanitary ball valve elemento element qtà quantity Elenco parti / Parts list descrzione description
3 MASTER STAR & 1 SUPER STAR
APPROVAL CERTIFICATE No. LRC 004 MASTER STAR & SUPER STAR FORGED STEEL BALL VALVES PED / EC ATEX 4/ CE 00 Certificate N : RPS 0004/0 Tech. File N ST0 ATEX P0 P0 MAC/0//TO/ MAC/0//TO/ D0 MASTER STAR CONSTRUCTION
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
TECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2
Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
SKU: AB4291. Pneumatic Actuated Ball Valve for Higher Temperatures
SKU: AB4291 VOLT Pneumatic Actuated Ball Valve for Higher Temperatures VOLTPneumatisch betätigte Kugelhahn für höhere Temperatur VOLT Válvula de bola con actuador neumático para mayor temperatura VOLT
Flanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
VILLA VALVOLE Sez. D
VIA VAVOE Sez. D Valvole a valves VAVOE A SFERA A MANICOTTI BA VAVES SCREWED ENDS in bronzo e in ottone bronze - brass Pag. 2 in acciaio inox stainless steel Pag. 3 in acciaio inox in tre pezzi Stanless
Maße / Dimensions 3-teiliger Kugelhahn Serie DG1 3-pce ball valve series DG1 DN 8 - DN 50 voller Durchgang / full bore
DN 8 - DN 50 voller Durchgang / full bore Antriebsanschluss nach DIN 3337 / ISO 5211 - siehe Datenblatt Antriebsanschluss Mounting plate acc. to DIN 3337 / ISO 5211 - see data sheet mounting plate DN NPS
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
Ghibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy. Butterfly valves
HD series valve HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes 7 Pneumatic actuators
SKU: AB4290. Pneumatic Actuated Flanged Ball Valve for Higher Temperatures DIN PN16 ANSI 150
SKU: AB4290 VOLT Pneumatic Actuated Flanged Ball Valve for Higher Temperatures VOLT Pneumatische betätigte Flanschkugelhahn für Höhere Temperaturen VOLT Válvula de bola con bridas neumáticas accionadas
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
Trunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
HD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4
HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes
Fully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
valvole 16 mm ad azionamento pneumatico
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
M21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
Knife Gate Valve HERA-SH. PN 10/16, Class 150 DN Uni-directional Full-lug body. Type Series Booklet
Knife Gate Valve HERA-SH PN 10/16, Class 150 DN 50-600 Uni-directional Full-lug body Type Series Booklet Legal information/copyright Type Series Booklet HERA-SH All rights reserved. The contents provided
Ref FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:
FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in
High performance valve with Nitrile/VITON elastomer. DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.
Type series booklet 8460.1215/7--10 High performance valve with Nitrile/VITON elastomer DN 80 to 800 (3 to 32 ) Pressure class: Class 150 Design in accordance with ASME B16.42 / B16.34 Applications Marine,
2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600
The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and
M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
PAV1 ISO A ACCIAIO STEEL STAHL ACIER. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques. Norme: ISO A
ISO A ACCIAIO STEEL STAHL ACIER 74 Caratteristiche tecniche I Nominal size Max working pressure Rated flow Max flow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min MPa MPa MPa cc 06 1 6.3 5 35 12
USE AND MAINTENANCE MANUAL
SERIES 8 Note: the numbers in parenthesis refer to the components in the exploded view of page 4 for mod. 5-30 and page 5 for mod. 70-330. VALBIA supplies a range of pneumatic rotary actuators, RACK and
TECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
IEC Automatic Drain Eccellente stabilità e ripetibilità. Compressed air, inert gases, sweet and sour gases Port thread / Connessioni
AISI316 1/4 NPT Instrument Filter Regulator FR serie Filtro Regolatore da 1/4 NPT in AISI316 serie FR Suitable for automation equipment to onshore, offshore, pharmaceutical, medical and food applications
M10F Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
PAO1-PAOC. Caratteristiche tecniche. Technical data. Technische Merkmale. Caracteristiques techniques
127 PAO1-PAOC Caratteristiche tecniche ISO A PASSAGGIO LIBERO/ACCIAIO FREE FLOW/STEEL FREIER DURCHLAUF/STAHL PASSAGE LIBRE/ACIER I PAO1 Nominal size Max working pressure Rated flow Max flow rate Min burst
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
SKU: AB Piece Ball Valve with Pneumatic actuator
SKU: AB4104 VOLT 2 Piece Stainless Steel Ball Valve Pneumatic Actuated VOLT 2 Stück Edelstahl-Kugelhahn Pneumatische betätigte VOLT 2 piezas de la bola de acero inoxidable de la válvula neumática Accionamiento
AISI316L 1/4 NPT Pressure Regulator R serie Regolatore di pressione da 1/4 NPT in AISI316L serie R
AISI316L 1/4 NPT Pressure Regulator R serie Regolatore di pressione da 1/4 NPT in AISI316L serie R Suitable for automation equipment to onshore, offshore, pharmaceutical, medical and food applications
PRODUCE EVOLUTION. Be careful, our valves Ref are changing
ATEX DIN M3 PRODUCE EVOLUTION Be careful, our valves Ref.704-706 are changing We currently have 2 different types available (according to DN) with different dimensions and ATEX certification for the new
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
Exploded view 3 piece ball valves Series R
Exploded view 3 piece ball valves Series R Ball valve of series R with reduced bore (standard version) DN10 to DN65 Example shown: Series R DN65 Please follow assembly and maintenance instructions carefully.
M21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
B V 4 S M A R T. Split body ball valve. Smart Design. Maximum certified Automation ready R T. Reduced weight traceability
B V 4 S M A R T Split body ball valve S Smart Design M Maximum certified Automation ready A R T Reduced weight traceability Table of contents Smart Design BV4 Smart - DIN F4 - AINSI 150 LBS Pag 3-4 - 5
* The sizing shown is based on air supply of 5.5 bar to pilot the actuator
Economy Pneumatic Actuated PVC-U Ball Valve Economy PVC-U ball valve Pneumatic Actuated EPDM / PTFE seals, seats Imperial, Metric or BSP end connections Sizes 1/2" to 4" Pressure range 10 Bar VOLT PVC-U
ACCESSORI ACCESSORIES
ACCESSORI ACCESSORIES A art. 556 ACCESSORI - Rubinetti portamanometri a tre vie costruzione in bronzo limite di impiego 16 bar / 80 C attacchi M F - - 1/2 - tipo C/FLANGIA - tipo C/FLANGIA E PREMISTOPPA
POMPE ROTOMEC BT 2030M η MAX
POMPE ROTOMEC BT 30M-30.4 DN 0 4 rpm Pompe sommergibili con girante bicanale aperta e diffusore autopulente Submersible pumps with 2 channel open impeller and self-cleaning diffuser Pompes submersibles
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
PVV3 VITE A VALVOLA SCREW COUPLINGS SCHRAUBKUPPLUNGEN VISSES. Caratteristiche tecniche. Technical data. Technische Merkmale
VITE A VALVOLA SCREW COUPLINGS SCHRAUBKUPPLUNGEN VISSES 122 PVV3 Caratteristiche tecniche I Nominal size Max working pressure Rated fl o w Max fl ow rate Min burst pressure DNP BG ISO mm Mpa l/min l/min
VALVE WITH UV ACTUATOR
CHARACTERISTICS The 3-way stainless steel 783-5+AP (L-port) and 784-6 +AP (T-port) ball valves are dedicated to the mixing, diverting or automatic discharging of industrial unloaded fluids. The valves