UNIWORLD series PNEUMATIC VALVES
|
|
- Kerrie Fields
- 5 years ago
- Views:
Transcription
1 UNIWORLD series PNEUMATIC VALVES 5100AD/E SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME / ANSI B16.10 DESCRIPTION The UNIWORLD series type 5100 AD are equipped with straight-through pattern bodies having ANSI face-to-face dimensions and EN ANSI JIS flanges. Quick lift plug with soft seal class VI or with metal seal class V. Compact construction assembled with multisprings pneumatic actuator The pneumatic actuator is suitable for 2-6 bar pneumatic signal. SIZES : from DN 15 to DN 100 TECHNICAL CHARACTERISTICS OF PNEUMATIC ACTUATOR : BODY CONNECTIONS : flanged EN PN16 PN40 Actuator : diaphragm type flanged ANSI B RF 300 RF Signal : min.2 max 6 bar flanged JIS B K 20K Ambient temperature : 70 C 3 bar *see on request Ambient temperature : 50 C > 3 bar *see on request MATERIALS OF BODY GROUP (1) : Actuator casings material : Fe P11 carbon steel Cast iron EN-GJL-250 UNI EN 1561 PN 16 ANSI 150 JIS 10 Diaphragm material Yoke material : EPDM 70 : EN-GJS500-7 spheroidal cast iron Carbon steel ASTM A216 WCB PN16/40 ANSI 150/300 JIS10/20 Pneumatic connections : ISO 7 Rp 1/8 Stainless steel AISI 316 CF8M PN16/40 ANSI 150/300 JIS10/20 AISI 316 st. st. trim - AISI 316 st. st. bonnet MAX WORKING CONDITIONS : Max inlet pressure : see leaflet n 101/VP PLUG : PT (DN15-50) - VPT (DN ): Max temperature : see leaflet n 101/VP PT metal seal class V Valve sizing : see leaflet n 100/VP PT/PTFE soft seal class VI for temperatures 150 C PT/PTFE/GR soft seal class VI for temperatures 190 C BONNET (2) : ON REQUEST : Standard : -5 to C Air filter regulator Finned : > 200 C Proximity limit switches Extended : below - 5 C 3-way solenoid valve Bellows sealed : for thermal oil or hazardous media with (PN ) standard safety gland arrangement Lubrificator on finned bonnet for temperatures 250 C Top-work manual handwheel ATEX 94/9/CE dedicated configuration according to the fluid GLAND ARRANGEMENT (PACKING) (3) with safety 0-rings : Kit diaphragm and actuator seals certified for a.t C PTFE 100% for temperatures 150 C PTFE 85% + GRAPHITE 15% for temperatures 200 C PURE GRAPHITE 100% for temperatures from 200 to 400 C to be used with finned bonnet CV = american unit (flowrate in USGPM with 1 psi of differential pressure) Kv = metric unit (flowrate in m3/h with 1 bar of differential pressure) PLUG DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100 Full bore Ø 1/2 Ø 3/4 Ø 1 Ø 1.1/4 Ø 1.1/2 Ø 2 Ø 2.1/2 Ø 3 Ø 4 PT CV KV Via Lecco, 69/ AGRATE BRIANZA (MB) Tel. 039/ Fax 039/
2 Maximum permissible pressure drops in Kg/cm2 Function NORMALLY OPENS ON AIR FAILURE Fluid direction OPEN (under the plug) Air pressure in bar DN Stroke in mm Actuator Δp permissible T T T T T T T T T COMPONENTS LIST AND MATERIALS COMPONENTS LIST 1. Body 1a. Bottom flange 2. Seat 3. Plug locknuts 4. Spring washer 5. Lower plug profile 5a. Soft ring 5b. Upper plug profile 6. Stem 7. Bonnet 8. Guide bush 9. Body gasket 10. Packing spring 11. Packing washer 12. Packing rings 13. Internal O ring 14. External O ring 15. Packing adjusting nut 16. Stud-bolts 17. Body locknuts 18. Yoke 19. Travel indicator plate 20. Position indicator locknuts 21. Position indicator 22. Diaphragm rod 23. O ring 24. Airtight 25. Yoke gasket 26. Lower diaphragm casing 27. Lower diaphragm casing internal bolts 28. Diaphragm spacer 29. Diaphragm 30. Diaphragm plate 31. Springs 32. Diaphragm bush 33. Diaphragm locknut 34. Diaphragm casing bolts 35. Upper diaphragm casing 36. Diaphragm casing locknuts 1. MATERIALI 1. See note (1) at page 1 1a. C40 carbon steel 2. AISI 316 stainless steel 3. AISI 304 stainless steel 4. AISI 304 stainless steel 5. AISI 316 stainless steel 5a. PTFE or PTFE/graphite 5b. AISI 316 stainless steel 6. AISI 316 stainless steel 7. See notes (1)-(2) at page1 8. AISI 304 stainless steel 9. Europil WS 3640 or PTFE 10. AISI 302 stainless steel 11. AISI 304 stainless steel 12. See note (3) at page Viton FPM Viton FPM AISI 303 stainless steel 16. Galvanized steel 17. DIN 934 galvanized steel 18. GGG50 spheroidal c. iron 19. Policarbonate 20. DIN 936 galvanized steel 21. Aluminium 22. AISI 303 stainless steel 23. NBR 24. NBR 25. Cork rubber 26. P11 steel 27. DIN 933 galvanized steel 28. Galvanized steel 29. EPDM P01 steel 31. C98 UNI AISI 303 stainless steel 33. ISO 7380 galvanized steel 34. DIN 934 galvanized steel 35. P11 steel 36. DIN 933 galvanized steel DIMENSIONS in mm. DN Ø A(1) A(2) B C - Bonnet D V V1 Actuator E Ø F Std Finned Bellows 15 1/ T / T T / T / T T / T T T A(1) cast iron = PN16 ANSI150 JIS10K A(2) carbon steel and stainless steel = PN16 PN40 ANSI150 ANSI300 JIS10K JIS20K Specifications given are only indicative and not binding for the manifacturer who reserve the right to carry-out any modifications deemed necessary without prior notice. All data sheets by CONFLOW SpA, are available last update on our internet web site
3 UNIWORLD series PNEUMATIC VALVES 5100AR/E SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AR Normally closed air opens Face-to-face ASME / ANSI B16.10 DESCRIPTION The UNIWORLD series type 5100 AR are equipped with straight-through pattern bodies having ANSI face-to-face dimensions and EN ANSI JIS flanges. Quick lift plug with soft seal class VI or with metal seal class V. Compact construction assembled with multisprings pneumatic actuator The pneumatic actuator is suitable for 2-6 bar pneumatic signal. Type 5100 AR valves are produced for two different applications : - for steam, air and gases with fluid direction CLOSE (F.C.) over the plug - for water and liquid with fluid direction OPEN (F.O.) under the plug SIZES : from DN 15 to DN 100 TECHNICAL CHARACTERISTICS OF PNEUMATIC ACTUATOR : BODY CONNECTIONS : flanged EN PN16 PN40 Actuator : diaphragm type flanged ANSI B RF 300 RF Signal : min.2 max 6 bar flanged JIS B K 20K Ambient temperature : 70 C 3 bar *see on request Ambient temperature : 50 C > 3 bar *see on request MATERIALS OF BODY GROUP (1) : Actuator casings material : Fe P11 carbon steel Cast iron EN-GJL-250 UNI EN 1561 PN 16 ANSI 150 JIS 10 Diaphragm material Yoke material : EPDM 70 : EN-GJS500-7 spheroidal cast iron Carbon steel ASTM A216 WCB PN16/40 ANSI 150/300 JIS10/20 Pneumatic connections : ISO 7 Rp 1/8 Stainless steel AISI 316 CF8M PN16/40 ANSI 150/300 JIS10/20 AISI 316 st. st. trim - AISI 316 st. st. bonnet MAX WORKING CONDITIONS : Max inlet pressure : see leaflet n 101/VP PLUG : PT (DN15-50) - VPT (DN ): Max temperature : see leaflet n 101/VP PT metal seal class V Valve sizing : see leaflet n 100/VP PT/PTFE soft seal class VI for temperatures 150 C PT/PTFE/GR soft seal class VI for temperatures 190 C BONNET (2) : ON REQUEST : Standard : -5 to C Air filter regulator Finned : > 200 C Proximity limit switches Extended : below - 5 C 3-way solenoid valve Bellows sealed : for thermal oil or hazardous media with (PN ) standard safety gland arrangement Lubrificator on finned bonnet for temperatures 250 C Top-work manual handwheel ATEX 94/9/CE dedicated configuration according to the fluid GLAND ARRANGEMENT (PACKING) (3) with safety 0-rings : Kit diaphragm and actuator seals certified for a.t C PTFE 100% for temperatures 150 C PTFE 85% + GRAPHITE 15% for temperatures 200 C PURE GRAPHITE 100% for temperatures from 200 to 400 C to be used with finned bonnet CV = american unit (flowrate in USGPM with 1 psi of differential pressure) Kv = metric unit (flowrate in m3/h with 1 bar of differential pressure) PLUG DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100 Full bore Ø 1/2 Ø 3/4 Ø 1 Ø 1.1/4 Ø 1.1/2 Ø 2 Ø 2.1/2 Ø 3 Ø 4 PT CV KV Via Lecco, 69/ AGRATE BRIANZA (MB) Tel. 039/ Fax 039/
4 Maximum permissible pressure drops in Kg/cm2 Function NORMALLY CLOSED ON AIR FAILURE NORMALLY CLOSED ON AIR FAILURE Fluid direction CLOSE (over the plug) OPEN (under the plug) Air pressure in bar DN Stroke in mm Actuator Δp permissible Δp permissible T T T T T T T T T COMPONENTS LIST AND MATERIALS COMPONENTS LIST 1. Body 1a. Bottom flange 2. Seat 3. Plug locknuts 4. Spring washer 5. Lower plug profile 5a. Soft ring 5b. Upper plug profile 6. Stem 7. Bonnet 8. Guide bush 9. Body gasket 10. Packing spring 11. Packing washer 12. Packing rings 13. Internal O ring 14. External O ring 15. Packing adjusting nut 16. Stud-bolts 17. Body locknuts 18. Yoke 19. Travel indicator plate 20. Position indicator locknuts 21. Position indicator 22. Diaphragm rod 23. O ring 24. Airtight 25. Yoke gasket 26. Lower diaphragm casing 27. Lower diaphragm casing internal bolts 28. Diaphragm spacer 29. Diaphragm 30. Diaphragm plate 31. Springs 32. Diaphragm bush 33. Diaphragm locknut 34. Diaphragm casing bolts 35. Upper diaphragm casing 36. Diaphragm casing locknuts 1. MATERIALI 1. See note (1) at page 1 1a. C40 carbon steel 2. AISI 316 stainless steel 3. AISI 304 stainless steel 4. AISI 304 stainless steel 5. AISI 316 stainless steel 5a. PTFE or PTFE/graphite 5b. AISI 316 stainless steel 6. AISI 316 stainless steel 7. See notes (1)-(2) at page1 8. AISI 304 stainless steel 9. Europil WS 3640 or PTFE 10. AISI 302 stainless steel 11. AISI 304 stainless steel 12. See note (3) at page Viton FPM Viton FPM AISI 303 stainless steel 16. Galvanized steel 17. DIN 934 galvanized steel 18. GGG50 spheroidal c. iron 19. Policarbonate 20. DIN 936 galvanized steel 21. Aluminium 22. AISI 303 stainless steel 23. NBR 24. NBR 25. Cork rubber 26. P11 steel 27. DIN 933 galvanized steel 28. Galvanized steel 29. EPDM P01 steel 31. C98 UNI AISI 303 stainless steel 33. ISO 7380 galvanized steel 34. DIN 934 galvanized steel 35. P11 steel 36. DIN 933 galvanized steel DIMENSIONS in mm. DN Ø A(1) A(2) B C - Bonnet D V V1 Actuator E Ø F Std Finned Bellows 15 1/ T / T T / T / T T / T T T A(1) cast iron = PN16 ANSI150 JIS10K A(2) carbon steel and stainless steel = PN16 PN40 ANSI150 ANSI300 JIS10K JIS20K Specifications given are only indicative and not binding for the manifacturer who reserve the right to carry-out any modifications deemed necessary without prior notice. All data sheets by CONFLOW SpA, are available last update on our internet web site
5 UNIWORLD series PNEUMATIC VALVES 5100DE/E SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 DE Double acting air closes air opens Face-to-face ASME / ANSI B16.10 DESCRIPTION The UNIWORLD series type 5100 DE are equipped with straight-through pattern bodies having ANSI face-to-face dimensions and EN ANSI JIS flanges. Quick lift plug with soft seal class VI or with metal seal class V. Compact construction assembled with double acting pneumatic actuator : air closes, air opnes The pneumatic actuator is suitable for 2-6 bar pneumatic signal from DN 15 to DN 50 and for 2-4 bar pneumatic signal from DN 65 to DN 100. SIZES : from DN 15 to DN 100 TECHNICAL CHARACTERISTICS OF PNEUMATIC ACTUATOR : BODY CONNECTIONS : flanged EN PN16 PN40 Actuator : diaphragm type flanged ANSI B RF 300 RF Signal : min.2 max.6 bar DN15..DN50 flanged JIS B K 20K Signal : min.2 max.4 bar DN65..DN100 Ambient temperature : 70 C 3 bar *see on request MATERIALS OF BODY GROUP (1) : Ambient temperature : 50 C > 3 bar *see on request Cast iron EN-GJL-250 UNI EN 1561 PN 16 ANSI 150 JIS 10 Actuator casing material Diaphragm material : Fe P11 : EPDM 70 Carbon steel ASTM A216 WCB PN16/40 ANSI 150/300 JIS10/20 Stainless steel AISI 316 CF8M PN16/40 ANSI 150/300 JIS10/20 AISI 316 st. st. trim - AISI 316 st. st. bonnet Yoke material Pneumatic connections : EN-GJS500-7 spheroidal cast iron : ISO 7 Rp 1/8 PLUG : PT (DN15-50) - VPT (DN ): MAX WORKING CONDITIONS : PT metal seal class V Max inlet pressure : see leaflet n 101/VP PT/PTFE soft seal class VI for temperatures 150 C Max temperature : see leaflet n 101/VP PT/PTFE/GR soft seal class VI for temperatures 190 C Valve sizing : see leaflet n 100/VP BONNET (2) : ON REQUEST : Standard : -5 to C Air filter regulator Finned : > 200 C Proximity limit switches Extended : below - 5 C 3-way solenoid valve Bellows sealed : for thermal oil or hazardous media with (PN ) standard safety gland arrangement Lubrificator on finned bonnet for temperatures 250 C Top-work manual handwheel ATEX 94/9/CE dedicated configuration according to the fluid GLAND ARRANGEMENT (PACKING) (3) with safety 0-rings : Kit diaphragm and actuator seals certified for a.t C PTFE 100% for temperatures 150 C PTFE 85% + GRAPHITE 15% for temperatures 200 C PURE GRAPHITE 100% for temperatures from 200 to 400 C to be used with finned bonnet CV = american unit (flowrate in USGPM with 1 psi of differential pressure) Kv = metric unit (flowrate in m3/h with 1 bar of differential pressure) PLUG DN 15 DN 20 DN 25 DN 32 DN 40 DN 50 DN 65 DN 80 DN 100 Full bore Ø 1/2 Ø 3/4 Ø 1 Ø 1.1/4 Ø 1.1/2 Ø 2 Ø 2.1/2 Ø 3 Ø 4 PT CV KV Via Lecco, 69/ AGRATE BRIANZA (MB) Tel. 039/ Fax 039/
6 Maximum permissible pressure drops in Kg/cm2 Function DOUBLE ACTING Fluid direction OPEN (under the plug) Air pressure in bar DN Stroke in mm Actuator Δp permissible T T T T T T T T T COMPONENTS LIST AND MATERIALS COMPONENTS LIST 1. Body 1a. Bottom flange 2. Seat 3. Plug locknuts 4. Spring washer 5. Lower plug profile 5a. Soft ring 5b. Upper plug profile 6. Stem 7. Bonnet 8. Guide bush 9. Body gasket 10. Packing spring 11. Packing washer 12. Packing rings 13. Internal O ring 14. External O ring 15. Packing adjusting nut 16. Stud-bolts 17. Body locknuts 18. Yoke 19. Travel indicator plate 20. Position indicator locknuts 21. Position indicator 22. Diaphragm rod 23. O ring 24. Airtight 25. Yoke gasket 26. Lower diaphragm casing 27. Lower diaphragm casing internal bolts 28. Diaphragm spacer 29. Diaphragm 30. Diaphragm plate 31. Springs 32. Diaphragm bush 33. Diaphragm locknut 34. Diaphragm casing bolts 35. Upper diaphragm casing 36. Diaphragm casing locknuts 1. MATERIALI 1. See note (1) at page 1 1a. C40 carbon steel 2. AISI 316 stainless steel 3. AISI 304 stainless steel 4. AISI 304 stainless steel 5. AISI 316 stainless steel 5a. PTFE or PTFE/graphite 5b. AISI 316 stainless steel 6. AISI 316 stainless steel 7. See notes (1)-(2) at page1 8. AISI 304 stainless steel 9. Europil WS 3640 or PTFE 10. AISI 302 stainless steel 11. AISI 304 stainless steel 12. See note (3) at page Viton FPM Viton FPM AISI 303 stainless steel 16. Galvanized steel 17. DIN 934 galvanized steel 18. GGG50 spheroidal c. iron 19. Policarbonate 20. DIN 936 galvanized steel 21. Aluminium 22. AISI 303 stainless steel 23. NBR 24. NBR 25. Cork rubber 26. P11 steel 27. DIN 933 galvanized steel 28. Galvanized steel 29. EPDM P01 steel 31. C98 UNI AISI 303 stainless steel 33. ISO 7380 galvanized steel 34. DIN 934 galvanized steel 35. P11 steel 36. DIN 933 galvanized steel DIMENSIONS in mm. DN Ø A(1) A(2) B C - Bonnet D V V1 Actuator E Ø F Std Finned Bellows 15 1/ T / T T / T / T T / T T T A(1) cast iron = PN16 ANSI150 JIS10K A(2) carbon steel and stainless steel = PN16 PN40 ANSI150 ANSI300 JIS10K JIS20K Specifications given are only indicative and not binding for the manifacturer who reserve the right to carry-out any modifications deemed necessary without prior notice. All data sheets by CONFLOW SpA, are available last update on our internet web site
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1500AD/E 01 2004 THREE WAY DIVERTING CONTROL VALVES PED 97/23/CE Art.3 Section.3 Type 1500 AD TYPE 1500 AD Normally closed port C on air failure C = CLOSE A-B = OPEN DESCRIPTION
PNEUMATIC VALVES HYGIENIC series
PNEUMATIC VALVES HYGIENIC series 1200AD/E 01 2004 SINGLE SEAT TWO WAYS PED 97/23/CE Art.3 Section 3 TYPE 1200 AD Normally open Air closes DESCRIPTION The 1200 HYGIENIC pneumatic control valves are with
Number of Way Type Power PN16/40 Flanges DIN JIS ANSI Flanges Control Low Noise
Via Lecco, 69/71 20041 AGRATE BRIANZA (MI) Tel. 039/651.705-650.397 Fax 039/654.018 www.conflow.it PRODUCTS TYPE Face to face DIN Number of Way Type Power PN16/40 Flanges Face to Face ANSI DIN JIS ANSI
Series 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
Series 240 Type 3351 Pneumatic On/off Valve
Series 240 Type 3351 Pneumatic On/off Valve Application Shut-off valve with tight shut-off for liquids, gases and vapors according to DIN or ANSI standards Valve size DN 15 to 100 NPS ½ to 4 Pressure rating
VALFONTA SELF-ACTING PRESSURE REDUCING VALVE M1
SELF-ACTING PRESSURE REDUCING VALVE M1 M1-15A-ENG PRESSURE REDUCING VALVE MODEL M1 VALFONTA MAIN CHARACTERISTICS The M1 model is self-operated bellows sealed pressure reducing valve. This series of regulators
Series 2003 / Three-way control valve. Features. Wörth am Main
Series 2003 / 2013 Three-way control valve SPECIFICATION The Series 2003 / 2013 comprises a range of skirt guided Three-way mixing (2003) and diverting valves (2013). Available in a variety of sizes, they
VALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
3-way control valve in mixing and diverting design
with electric and pneumatic actuators 3-way control valve in mixing and diverting design 1/2-6 STEVI 450 / 451 Electric actuator Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION ON-OFF 2,3-WAY GLOBE VALVE YAD-112Q1/11231 Series YAC-31231 Series YAC-31281 Series http://www.proval.co.kr [B-8] GENERAL The single soft seat control valves are designed
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator
Valve Series V2001 Globe Valve Type 3321 with Pneumatic or Electric Actuator Application Control valves designed for mechanical and plant engineering. Suitable for liquids, gases and steam Nominal size
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges TA
Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
Control Valves Series 2000 Heavy Duty valve 2 way
Series 2000 Heavy Duty valve 2 way Technical data Size (DN) DN 15 150 Pressure rating PN16, PN40 ANSI 300 Connections Flanges UNI/DIN PN16, PN40 Flanges ANSI 300 Type sealing Metallic (Class IV - V), soft
CE43 1" (DN25) to 4" (DN100) Carbon Steel Cage Design, Two Port Control Valves
Globe 13 CE43 1" (DN25) to 4" (DN) Carbon Steel Cage Design, Two Port Description The CE43 series is a range of carbon steel two port, cage trim, control valves conforming to ANSI B16.34, ASME VIII standards
Control Valve 23 / 24 Single-seat straight-way valve with exchangeable seat ring
Change from one to two columns Data Sheet 10/138.29EN Rev. B Control Valve 23 / 24 Singleseat straightway valve with exchangeable seat ring Size DN 15... DN 100 With pneumatic actuator Verschiedene Gehäusewerkstoffe
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
Type 1a Globe Control Valve
PTFE-lined Type 1a Globe Control Valve Application: PTFE-lined control valve for corrosive media, particularly for severe requirements in chemical applications: Valve sizes DN 25 to 150 or NPS 1 to 6 Pressure
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001
Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
ANSI version. The valve closes when the differential pressure rises
Self-operated Regulators Series 42 Differential Pressure Regulator with Type 2424/Type 2428 Actuator and Type 2422 Valve Type 42-24 A Type 42-24 B Type 42-28 A Type 42-28 B ANSI version Application For
ARI-FABA -ANSI LongLife Stop valve with bellows seal
Stop valve with bellows seal Free of maintenance stop valve with bellows seal - metallic sealing ARI-FABA -ANSI LongLife - Class 150 Straight through with flanges German TA - Luft TÜV-Test-No. 088-945053
Series 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size 15 to 300 Nominal pressure
BALL SECTOR VALVE of stainless steel 455 series
C ont R o L Description Edition Högfors ball sector valve series 55 is specially designed for control applications of various media like liquids, pulps and steam. 55KC is used for sticky and crystallizing
Angle Seat Valve /2" up to 3"
1/ up to up to 428 F Pneumatically operated angle seat valve for the control of neutral and aggressive gases, liquids and steam. Compact design For temperatures from -22 F up to +428 F Working pressure
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
WAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
Series 240 Type and Type Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing
ARI-FABA -Plus / -Supra ANSI Stop valve with bellows seal Free of maintenance stop valve with bellow seal - metallic sealing ARI-FABA -Plus ANSI Class 150 / Class 300 Straight through with flanges EN ISO
SPIRA-TROL Two-port Control Valves ASME Standard KEA, KFA and KLA ½" to 8"
SPIRA-TROL Two-port Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME standard. These valves are available in three body materials in sizes
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series)
PNEUMATIC CONTROL VALVES V403 DN65 DN100 (V403 globe valves series with linear actuators PA or EL series) DESCRIPTION The PV403 control valves are three-way valves for mixing or diverting service. The
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
CONTROL VALVE STANDARD SPECIFICATION
CONTROL VALVE STANDARD SPECIFICATION QUICK CHANGE TYPE 2-WAY GLOBE VALVE YAD-122Q1 Series http://www.proval.co.kr PROVAL Co., Ltd. [B-1] TOP GUIDE SINGLE SEATED TYPE GENERAL The design of Quick Change
ARI-STEVI 448 / 449 (DN15-100) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators
ARI-STEVI 8 / 9 (DN5-00) Control valve in straightway form with screwed seat ring With pneumatic and electric actuators ARI-STEVI 8 / 9 Pneumatic actuator ARI-DP 30-3 Reversible pneumatic actuator Actuator
Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244
Series 240 Pneumatic Control Valves Type 3244-1 and Type 3244-7 Three-way Valve Type 3244 DIN and ANSI versions Applications Mixing or flow-diverting valves for use in process engineering and industrial
Maintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16
BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series
Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
VALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67
VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
HELYON PRESSURE REDUCING VALVE MODEL M1
PRESSURE REDUCING VALVE MODEL - 5 Chemin du Jubin 69570 DARDILLY MAIN CHARACTERISTICS The model is self-operated bellows sealed pressure reducing valve. This series of regulators is suitable for steam,
Type 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
ARI-STEVI ANSI (NPS 1/2" - 2") with electric and pneumatic actuators Control valve in straightway form
with electric and pneumatic actuators Control valve in straightway form ARI-STEVI 440 - ANSI Pneumatic actuator ARI-DP 32-33 Reversible pneumatic actuator Actuator with rolling diaphragm Air supply pressure
High Capacity Direct Operated Pressure Reducing Valve. Features
MK608UBAN Series High Capacity Direct Operated Pressure Reducing Valve The MK608UBAN series are spring loaded, direct-operated, pressure reducing regulators. Their main function is to regulate the outlet
NON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 ANSI version Application Pressure regulators for set points from 0.075 to 400 psi (5 mbar to 28 bar) Valves in NPS ½ to 4
Pressure reducing valve Pressure reducing valve in straightway form DN
Pressure reducing valve Pressure reducing valve in straightway form DN 15-150 ARI-PREDU Pressure regulating valve, straight through with diaphragm actuator DMA Actuator with rolling diaphragm Grey cast
SPIRA-TROL 1/2" to 4" ANSI Two-port KEA, KFA and KLA Control Valves
1/2" to 4" ANSI Two-port KEA, KFA and KLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
SPIRA-TROL. DN15 to DN50. LE, LF and LL Two-port Control Valves
Page 1 of 10 Cert. No. LRQ 0963008 ISO 9001 SPIR-TROL DN15 to DN100 LE, LF and LL Two-port Control Valves TI-P303-11 CH Issue 2 Description SPIR-TROL is a range of two-port single seat globe valves with
ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4")
Page 1 of 17 Cert. No. LRQ 09608 ISO 9001 STERI-TROL Clean Service 'S' series Two-port and Three-port Control Valves - DN15 (½") to DN100 (4") TI-P183-02 CH Issue 3 Description STERI-TROL 'S' series are
NAF-Trunnball ball valves
NAF-Trunnball ball valves DN 150-800, Size 6-32 PN 10-40, ANSI Class 150-300 Fk 41.66(1)GB 07.12 Primary characteristics NAF-Trunnball is a trunnion ball valve with full-bore. It is designed to give a
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T Reversible pneumatic actuator
BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic
B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6
PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves
Description The PN9000 series actuators are a compact range of linear actuators that are available in 3 diaphragm sizes for matching the requirements of valves at various differential pressures. Each actuator
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2
BBV Automatic or Manually Actuated Boiler Blowdown Valves DN15 to DN65
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development improvement of the product, we reserve the right to change the specification without
Rate B standard. Rate A Rate A option. max +260 C/ min -40 C
of carbon steel 315 -series C ont R o L Description Edition 30-03-2015 The welded butterfly valve 315 is used for example in district heating, district cooling and industry. It can be used as an on-off
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator
Series V2001 Valves Type 3531 Globe Valve for Heat Transfer Oil with pneumatic or electric actuator ANSI version Application Control valves for heat transfer applications using organic media according
Cast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
Series 240 Types PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve
Series 240 Types 3241-1 PSA, -7 PSA, -9 PSA Pneumatic Control Valves Type 3241 PSA Globe Valve ANSI version Application Control valves for PSA plants (Pressure Swing Adsorption) s NPS ½ to 6 Pressure rating
RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.
Fig. 6022-6025 RAIMONDI High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services. Features Forged body materials of highest quality, all in compliance with ASME
SPIRA-TROL 1/2" to 4" ANSI Two-port LEA, LFA and LLA Control Valves
1/2" to 4" ANSI Two-port LEA, LFA and LLA Description SPIRA-TROL is a range of two-port single seat globe valves with cage retained seats conforming to ASME/ANSI standards. These valves are available in
with electric and pneumatic actuators Stop valve in straightway form DN ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE
with electric and pneumatic actuators Stop valve in straightway form DN 300-500 ARI-STEVI 405 / 460 Electric actuator AUMA SA with LE Electric multiturn actuator capable of high closing pressures Enclosure
R o L. BUTTERFLY VALVE of carbon steel with welded ends 313 -series BLUE LINE. Description
of carbon steel 313 -series C ont R o L Description Edition 23-07-2015 The welded butterfly valve 313 is specially designed for district heating and district cooling. It can be used as an on-off or control
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The
XV en /5 XV Knife gate valve DN
-80-800-en-04 1/5 The Stafsjö knife gate valve is a compact bi-directional valve with full bore. The valve is specially designed with regard to good flow characteristics and simple maintenance which makes
Fabricated Bevel Gear Operator Bi-Directional Metal Seat 150 PSI Bi-Directional Resilient Seat 150 PSI
Knife Gate Valves Uni-Directional (Metal Seated) Manual Handwheel Style KGV...2 Carbon Steel Technical Data 150 PSI 2 24...3 304 Stainless Steel Technical Data 150 PSI 2 24...3 316 Stainless Steel Technical
BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg
Angle Seated Valves. ecoflo-as. Angle Seated Valves
Angle Seated Valves ecofloas Angle Seated Valves AngleSeat Valves PNEUMATIC AND ELECTRIC VALVES PN / PN / PN / ANSI 0 / ANSI 00 series pneumatic and electric valves are designed as onoff or reglation valves
NAF-Duball ball valves
NAF-Duball ball valves 25-400, Size 1-16 PN 10-40, ANSI Class 150-300 Fk 41.61(22)GB 07.12 Primary characteristics NAF-Duball is a full-bore ball valve which, due to its design and combination of materials,
WAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
Single Seated Globe Control Valves
Product 1: Top Guided Single Seated Control Valves Type: Globe Size: 1-1/2'', 2'', 2-1/2'', 3'', 4'', 6''and 8 (DN40 DN200) Pressure Rating: ANSI 125 ~ ANSI 600 (PN16~PN64, JIS10K~JIS40K) Body Material:
with electric and pneumatic actuators Control valve straight through with V-port plug DN ARI-STEVI 425 / 426
with electric and pneumatic actuators Control valve straight through with V-port plug DN 300-500 ARI-STEVI 425 / 426 Electric actuator AUMA SAR with LE Electric multiturn actuator capable of high closing
16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option
Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions
STEVI 440 / 441. Straight through control valve DN
with electric and pneumatic actuators Straight through control valve DN 15-100 Electric actuator ARI-PREMIO Enclosure IP 65 2 torque switches 1 travel switch Handwheel Additional devices available, e.g.
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
Technical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
Series 110 Globe Control Valves
Series Control Valves Series Globe Control Valves This type of control valve with it s globe body shape, uses the variable area generated within the control valve trim to control fluid flow. Designed in
BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR
1121-1125 BUTTERFLY VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 1121 to 1125 wafer butterfly valves are dedicated to the automatic shut-off of medium pressure industrial fluids lines up to
BI-DIRECTIONAL KNIFE GATE VALVE
Wastewater treatment plants Food and Beverage Chemical plants Sizes: Working pressure: DN 2"/ 50mm to DN 10"/ 250mm DN 12"/300mm to DN 16"/ 400mm DN 18"/450mm DN 20"/500mm to DN 24"/ 600mm DN 28"/700mm
BUTTERFLY VALVE 1234P SERIES
FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator
Series 240 Type and Type Pneumatic Control Valves Type 3347 Hygienic Angle Valve
Series 240 Type 3347-1 and Type 3347-7 Pneumatic Control Valves Type 3347 Hygienic Angle Valve Application Control valve for hygienic applications in the food and pharmaceutical industries Valve size DN
WAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
MK508UBS Series. Back Pressure Regulator MK508UBS. Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction.
MK508UBS Series Threaded or Flanged Connections Carbon Steel, Stainless Steel & Alloy Construction The MK508UBS Series are spring loaded, direct-operated, pressure relief valves used downstream of pressure
KNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
THROUGH CONDUIT KNIFE GATE VALVE. OBX 09/11 2nd EDITION Revision 1 Reserves the right to change specifications without notice
THROUGH CONDUIT KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging shut off on either normal or
Excess pressure regulator Excess pressure regulator, straight through DN
ARI-PREDEX Excess pressure regulator Excess pressure regulator, straight through DN 15-150 ARI-PREDEX Excess pressure regulator, straight through with diaphragm actuator UDA Actuator with rolling diaphragm