VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE B.W. S.W. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
|
|
|
- Frederick Harold West
- 6 years ago
- Views:
Transcription
1 NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE B.W. S.W. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V. ATEX nbr issued by B.V. ISO nbr I /1-/2 issued by TÜV On request S.I.L. 3 According to IEC On request FIRE SAFE According to ISO ISO-FT CONSTRUCTION ACCORDING TO: BS EN DIN 3202 M3 ISO FULL BORE ACCORDING TO ISO BALL VALVES 2 PIECE FULL BORE ROBINETS A BOISSEAU SPHERIQUE 2 PIECES PASSAGE INTEGRAL KUGELHÄHNE 2 TEILIG VOLLER DURCHGANG WEB SITE:
2 VALVOLA A SFERA "2 PEZZI" PASSAGGIO TOTALE BALL VALVES "2 PIECE" FULL BORE ROBINETS A BOISSEAU SPHERIQUE "2 PIECES" PASSAGE INTEGRAL KUGELHÄHNE "2 TEILIG" VOLLER DURCHGANG CONSTRUCTION ACCORDING TO: BS EN DIN 3202 M3 ISO ACCOPPIAMENTO VALVOLA ATTUATORE CONNECTION VALVE ACTUATOR ACCOUPLEMENT ROBINET- ACTIONNEUR ZUSAMMENBAU KUGELHAHN ANTRIEB ISO-5211
3 N. 1 2 DESCRIZIONE BESCHREIBUNG CORPO BODY CORPS MITTE GHIERA INSERT EMBOUT GEWINDEDRUCKRING MATERIALI MATERIALS MATERIAUX WERKSTOFFE N. ASTM A105 9* ASTM A105 3* O RING FKM (VITON) 11 ANELLO SEAL 4* ANNEAU DICHTUNGSRING SEDE RINFORZATA SEAT REINFORCED 5* SIEGE RENFORCE SITZRING VERSTÄRKT SFERA BALL BOULE KUGEL DISPOSITIVO ANTISTATICO ANTISTATIC DEVICE CONTACT ANTISTATIQUE ANTISTATIK VORRICHTUNG STELO STEM TIGE SPINDEL P.T.F.E. 12 P.T.F.E. / 15% FIBERGLASS P.T.F.E. / STAINLESS STEEL 13 ASTM A351 CF8 ASTM A351 CF8M DESCRIZIONE BESCHREIBUNG BUSSOLA STEM SEAL JOINT TIGE UNTERE SPINDELABDICHTUNG PACCO A V CHEVRON RINGS 10* JOINT A V 3 FACHE DACHMANSCHETTE PREMIBUSSOLA PRESSING BUSH PRESSE RONDELLE STOPFBUCHSDRUCKRING Ø 3/8 Ø 3/8 16 MOLLE A TAZZA SPRING WASHERS RONDELLES BELLEVILLE TELLERFEDERN VITE DI FERMO E FERMO PIN AND STOP PIN PLOT ET PLOT D ARRET ANSCHLAGBOLZEN DADO CONTRODADO NUT LOCK NUT ECROU CONTRE-ECROU MUTTER KONTERMUTTER LEVA WRENCH LEVIER HANDHEBEL MATERIALI MATERIALS MATERIAUX WERKSTOFFE P.T.F.E. P.T.F.E. / GRAFITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHIT ASTM A C72/50Cr V4 X5CrNi17.7 or X12CrNi17.7 UNI GALVANIZED - ON REQUEST GALVANIZED - UNI 3951 A2-70 ON REQUEST UNI S GALVANIZED ASTM A ON REQUEST AISI 1010 GALVANIZED ASTM A ON REQUEST * RICAMBI CONSIGLIATI RECOMMENDED SPARE PARTS PIECES DE RECHANGE CONSEILLEES ERSATZTEIL EMPHEHLUNG DIMENSIONI DIMENSION DIMENSIONS ABMESSUNGEN ¼ 3/8 ½ ¾ 1 1¼ 1½ 2 2½ A B C D 49, E F M5 M5 M5 M5 M5 M6 M6 ISO F03 F03 F03 F03 F03 F05 F05 G H K L M N P 17, , R S T Z PN PN Kg 1,5 1,7 2,2 3,1 4,3 5,8 9,6 DATI E CARATTERISTICHE SOGGETTI A VARIAZIONI SENZA PREAVVISO SPECIFICATIONS SUBJECT TO MODIFICATIONS WITHOUT PRIOR NOTICE TOUS DROITS DE MODIFICATION RESERVES KONSTRUKTIONSÄNDERUNGEN VORBEHALTEN ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com
4 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN ONLY FOR VALVES DN 50 FORO DI BILANCIAMENTO BALANCING HOLE TROU DE BALANCEMENT DRUCKENTLASTUNGSBOHRUNG ON REQUEST AVAILABLE ON DN 40 EXECUTION 4-12 EXECUTION 6-16 STANDARD OPTIONAL PN PN SEDI ANIMA METALLICA -SEATS WITH METAL CORE -SIEGES AVEC AME METALLIQUE -SITZE MIT METALLKERN -SEDI ANIMA METALLICA -SEATS WITH METAL CORE -SIEGES AVEC AME METALLIQUE -SITZE MIT METALLKERN -STELO ANTI ESPULSIONE -TIGE ANTIEXPULSION -ANTI BLOW OUT STEM -AUSBLASGESICHERETE WELLE DN ¼ 1 ¼ BREVETTO PATENTED ½ 2 -PACCO A V -JOINT A V ANTISTATIC DEVICE -CHEVRON RINGS -3 FACHE DACHMANSCHETE ANTISTATIK VORRICHTUNG BS MANIGLIA OVALE - OVAL HANDLE -LEVIER OVAL HANDHEBEL IN OVALFORM - O RING STELO O RING ON STEM -TIGE AVEC O RING - O RING IM SPINDELBEREICH
5 -PROLUNGA STELO -STEM EXTENSION -TIGE PROLONGEE -SPINDELVERLÄNGERUNG -PARTICOLARI INOX -STAINLESS STEEL DETAILS -ACCESSOIRES EN INOX -EDELSTAHLTEILE -ATTACCO ISO -SYSTEM ISO - ISO CONNECTIONS -ANSCHLUSS ISO ADLER UNA GAMMA COMPLETA PRIVILEGIANDO LA QUALITA A COMPLETE RANGE PRIVILEGING THE QUALITY ANTISTATIC DEVICE CERTIFICATE FIRE SAFE ISO ISO-FT (BS 6755 / API 607) VEDERE / SEE ANSI B DOPPIA TENUTA -DOUBLE ETANCHEITE DOUBLE SEALS -DOPPELTE ABDICHTUNG -FORO DI SCARICO NELLA SFERA -OVERPRESSURE HOLE INTO BALL -TROU DECOMPRESSION DANS LA BOULE -ENTLASTUNGSBOHRUNG IN DER KUGEL VALVOLA MONO DIREZIONALE MONO-DIRECTIONAL VALVE - SERVIZIO CRIOGENICO CRYOGENIC SERVICE - SERVICE CRYOGÉNIQUE - TIEFTEMPERATUR SERVICE TESTING TOLLERANCE CHECK 10-4
6 CARATTERISTICHE DEL NIPPLO INTEGRALE - INTEGRAL NIPPLE CHARACTERISTICS CARACTÉRISTIQUES DU NIPPLE INTÉGRAL - ABMESSUNGEN ANSCHWEISSENDEN B.W. ANSI B Sch. 40 (STANDARD ADLER) Ø 1/4 3/8 1/2 3/4" 1 1 1/4 1 1/ /2 3 4 Ø A Ø B 9,2 12,5 15, , ,9 52,5 62, Ø C 11,6 14,1 17,4 22,6 28,3 36,7 42,5 54,7 64, Ø D 13,7 17,1 21,3 26,7 33,4 42,2 48,3 60, L 3,5 4,2 4,3 5,1 5,5 5,6 5, S.W. ANSI B SERIE 3000 DIN 3239 T2 R4-R5 Ø 1/4 3/8 1/2 3/4" 1 1 1/4 1 1/2 2 Ø A Ø B 17,6 21,8 27,1 33,8 42,6 48,7 61,2 Ø D , L 10 9,7 12,7 12,7 12,7 12,7 15,8 S 3,7 6,1 5,45 6,1 5,45 6,15 6,4
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE BW SW
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B NPT
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B NPT
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7-1 ANSI B NPT S.W. B.W.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2 issued
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE
PN 10-40 VALVOLE A SFERA UNI EN 558-1 SPLIT BODY PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA UNI EN 558-1 SPLIT BODY
FN2 TYPE PN PN On request FIRE SAFE According to ISO ISO-FT
WWW.ADLERSPA.COM PN 10-40 PN 63-160 BALL VALVES UNI EN 558-1 FULL BORE SPLIT BODY ROBINETS A BOULE UNI EN 558-1 PASSAGE INTEGRAL 2 PIECES FLANSCHKUGELHÄHNE IN UNI EN 558-1 VOLLER DURCHGANG ZWEITEILIGES
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE
VALVOLE A SFERA ANSI B SPLIT BODY PASSAGGIO TOTALE
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE INGLINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA
VALVOLE A SFERA 4 VIE CON SFERA A X
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 4
BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOULE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90
ISO 9001:2008 by L.R. WWW.ADLERSPA.COM BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOULE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 ISO nbr LRC 0160281 QMS issued by L.R.Q.A.
RT7 BALL VALVES "4 WAY" WITH X BALL ROBINETS A BOULE "4 VOIES" AVEC BOULE A X KUGELHÄHNE "4 WEGE" MIT X KUGEL TYPE PN
ISO 9001:2008 by L.R. WWW.ADLERSPA.COM BALL VALVES "4 WAY" WITH X BALL KUGELHÄHNE "4 WEGE" MIT X KUGEL ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA UNI
ROBINETS A BOISSEAU SPHERIQUE 3 VOIES WAFER PASSAGE INTEGRAL 90 AVEC ENVELOPPE KUGELHÄHNE "3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 90 MIT HEIZMANTEL
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2 issued
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:
ISO 9001:2008 by L.R. FT4 PN 10 40 ANSI 150 300* NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO SPLIT BODY
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO SPLIT BODY
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE
FB2 VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO SPLIT BODY
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE
ISO 9001:00 by L.R. PED DIR. 97/3/EC by L.R. ISO 154 by TÜV FA NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
ISO 9001:00 by L.R. PED DIR. 97/3/EC by L.R. ISO 154 by TÜV FX NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf
Features BALL VALVES. Split Wafer. Carbon steel wafer PN ANSI 600 STANDARD FEATURES FEATURES ON REQUEST
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
Features BALL VALVES. Thor Split Body Stainless steel PN ANSI 600 STANDARD FEATURES CERTIFICATIONS ENGINEERING STANDARD
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
3 MASTER STAR & 1 SUPER STAR
APPROVAL CERTIFICATE No. LRC 004 MASTER STAR & SUPER STAR FORGED STEEL BALL VALVES PED / EC ATEX 4/ CE 00 Certificate N : RPS 0004/0 Tech. File N ST0 ATEX P0 P0 MAC/0//TO/ MAC/0//TO/ D0 MASTER STAR CONSTRUCTION
Valvola a sfera sanitaria manuale. Manual sanitary ball valve
Valvola a sfera sanitaria manuale Manual sanitary ball valve Valvola a sfera sanitaria manuale Manual sanitary ball valve elemento element qtà quantity Elenco parti / Parts list descrzione description
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 250 mm Between flanges PN16/40-28 C + 200 C Max Pressure : 40 Bars up to DN80, 16 bars over Specifications : With ISO 5211 mounting pad Contents
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2
SKU: AB4291. Pneumatic Actuated Ball Valve for Higher Temperatures
SKU: AB4291 VOLT Pneumatic Actuated Ball Valve for Higher Temperatures VOLTPneumatisch betätigte Kugelhahn für höhere Temperatur VOLT Válvula de bola con actuador neumático para mayor temperatura VOLT
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Fully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
TECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
M10F Ball Valve DN¼" to DN2½"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
VILLA VALVOLE Sez. D
VIA VAVOE Sez. D Valvole a valves VAVOE A SFERA A MANICOTTI BA VAVES SCREWED ENDS in bronzo e in ottone bronze - brass Pag. 2 in acciaio inox stainless steel Pag. 3 in acciaio inox in tre pezzi Stanless
VALVOLE A SFERA A PASSAGGIO TOTALE, SERIE EXTRA PESANTE PN50 ( 9 filetti) Ball valves full bore, Extra Heavy Type (9 threads)
A PASSAGGIO TOTALE, SERIE EXTRA PESANTE PN50 ( 9 filetti) Ball valves full bore, Extra Heavy Type (9 threads) Caratteristiche tecniche Technical features Corpo e sfera : Ottone CW617N UNI EN 12165 Asta
BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
Trunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
3 MASTER STAR & 1 SUPER STAR
PPROVL CERTIFICTE No. LRC 4 MSTER STR & SUPER STR FORGED STEEL BLL VLVES PED / EC TEX 4/ CE Certificate N : RPS 4/ Tech. File N ST TEX P P MC///TO/ MC///TO/ D MSTER STR CONSTRUCTION MTERIL Body Shape for:
Hygienic 3 Way Full Bore with Clamp Ends. MARS Series 36SN L and T Port SKU: BV5136
SKU: BV5136 Mars Series 36SN 3 Way Hygienic Ball Valve Clamp End Mars Series 36SN 3 Way Hygienic -Kugelhahn - Klemmende Mars Series 36SN 3 Válvula de bola de Higiene Camino - Clamp Fin Mars Series 36SN
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR
736XS-746 XS VALVE WITH AP PNEUMATIC ACTUATOR VALVE FEATURES The 736 XS-746 XS is a 3 pieces full bore ball valve for industrial fluids, especially made to be easily actuated and to offer a good and long
M21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
PRODUCE EVOLUTION. Be careful, our valves Ref are changing
ATEX DIN M3 PRODUCE EVOLUTION Be careful, our valves Ref.704-706 are changing We currently have 2 different types available (according to DN) with different dimensions and ATEX certification for the new
What's in a ball valve?
Ball valves What's in a ball valve? An efficient and reliable process demands quality products. This includes the important function of flow isolation. If inferior products are used, breakdowns and expensive
Trunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
SKU: AB4290. Pneumatic Actuated Flanged Ball Valve for Higher Temperatures DIN PN16 ANSI 150
SKU: AB4290 VOLT Pneumatic Actuated Flanged Ball Valve for Higher Temperatures VOLT Pneumatische betätigte Flanschkugelhahn für Höhere Temperaturen VOLT Válvula de bola con bridas neumáticas accionadas
PRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing
PRODUCT EVOLUTION Be careful, our valves Ref.702 are changing We currently have 2 different types available (according to DN) with different dimension and non-commutable gaskets Old marking : New marking
Peter Meyer Ball valves Cryogenic
Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing
Ghibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy. Butterfly valves
HD series valve HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes 7 Pneumatic actuators
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C
* The sizing shown is based on air supply of 5.5 bar to pilot the actuator
Economy Pneumatic Actuated PVC-U Ball Valve Economy PVC-U ball valve Pneumatic Actuated EPDM / PTFE seals, seats Imperial, Metric or BSP end connections Sizes 1/2" to 4" Pressure range 10 Bar VOLT PVC-U
Maße / Dimensions 3-teiliger Kugelhahn Serie DG1 3-pce ball valve series DG1 DN 8 - DN 50 voller Durchgang / full bore
DN 8 - DN 50 voller Durchgang / full bore Antriebsanschluss nach DIN 3337 / ISO 5211 - siehe Datenblatt Antriebsanschluss Mounting plate acc. to DIN 3337 / ISO 5211 - see data sheet mounting plate DN NPS
Exploded view 3 piece ball valves Series R
Exploded view 3 piece ball valves Series R Ball valve of series R with reduced bore (standard version) DN10 to DN65 Example shown: Series R DN65 Please follow assembly and maintenance instructions carefully.
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
Flanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
Ref FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:
FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in
2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled
BALL VALVE WITH ADA PNEUMATIC ACTUATOR
702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws
RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600
The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and
AISI316L 1/4 NPT Pressure Regulator R serie Regolatore di pressione da 1/4 NPT in AISI316L serie R
AISI316L 1/4 NPT Pressure Regulator R serie Regolatore di pressione da 1/4 NPT in AISI316L serie R Suitable for automation equipment to onshore, offshore, pharmaceutical, medical and food applications
Ball valves class 150, 300, 400, 600, 800, 900,1500 and 2500 ANSI
Ball valves class 150, 300, 400, 600, 800, 900,1500 and 2500 ANSI Certifications and tests Cryogenic test Firesafe test Final inspection Certificates of the company ISO 9001 AD-Merkblatt WO/TRD 100 Quality
Stainless Steel Valves
Stainless Steel Valves A-261T Y-Strainer screwed end, PN40, PSI800 Investment casting body Maximum working temperature 230 C The end-to-end length conforms to DIN 3202, Part 4. M8series (PN40) Thread ends
M21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without