VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
|
|
|
- Aubrey Morton
- 6 years ago
- Views:
Transcription
1 NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V. ATEX nbr issued by B.V. ISO nbr I /1-/2 issued by TÜV FULL BORE ACCORDING TO ISO On request FIRE SAFE According to ISO ISO-FT On request S.I.L. 3 According to IEC CONSTRUCTION ACCORDING TO: BS EN ANSI B16.34 ISO ANSI B16.5 ANSI B16.10/UNI EN BALL VALVES ANSI B16.10 FULL BORE SPLIT BODY ROBINETS A BOISSEAU SPHERIQUE ANSI B16.10 PASSAGE INTEGRAL 2 PIECES FLANSCHKUGELHÄHNE IN ANSI B16.10 VOLLER DURCHGANG ZWEITEILIGES GEHÄUSE WEB SITE:
2 VALVOLA A SFERA "ANSI B 16.10" SPLIT BODY PASSAGGIO TOTALE BALL VALVES "ANSI B 16.10" SPLIT BODY FULL BORE ROBINETS A BOISSEAU SPHERIQUE "ANSI B 16.10" PASSAGE INTEGRAL 2 PIECES FLANSCHKUGELHÄHNE IN "ANSI B 16.10" VOLLER DURCHGANG ZWEITEILIGES GEHÄUSE DN 200 -CONSIGLIATO RIDUTTORE MANUALE -MANUAL GEAR BOX SUGGESTED -REDUCTEUR MANUEL CONSEILLE -EMPFEHLEN WIR EIN HANDGETRIBE CONSTRUCTION ACCORDING TO: BS EN ANSI B16.34 ISO ANSI B16.5 ANSI B16.10/UNI EN ACCOPPIAMENTO VALVOLA ATTUATORE CONNECTION VALVE ACTUATOR ACCOUPLEMENT ROBINET- ACTIONNEUR ZUSAMMENBAU KUGELHAHN ANTRIEB ISO-5211
3 N. 1 2 DESCRIZIONE BESCHREIBUNG CORPO BODY CORPS MITTE LATERALE END LATERAL ENDE MATERIALI MATERIALS MATERIAUX WERKSTOFFE N. ASTM A105 ASTM A 351 CF8M ASTM A105 ASTM A 351 CF8M 9* DESCRIZIONE BESCHREIBUNG BUSSOLA STEM SEAL JOINT TIGE UNTERE SPINDELABDICHTUNG 10* PACCO A V CHEVRON RINGS JOINT A V 3 FACHE DACHMANSCHETTE 3* O-RING FKM (VITON) 11 PREMIBUSSOLA PRESSING BUSH PRESSE RONDELLE STOPFBUCHSDRUCKRING 4* 5* ANELLO SEAL ANNEAU DICHTUNGSRING SEDE SEAT SIEGE SITZRING SFERA BALL BOULE KUGEL DISPOSITIVO ANTISTATICO CONTACT ANTISTATIQUE ANTISTATIK VORRICHTUNG STELO STEM TIGE SPINDEL P.T.F.E. 12 P.T.F.E. (BAM CERTIFIED) R.P.T.F.E. (OPTIONAL) 13 ASTM A351 CF8 14 ASTM A351 CF8M MOLLE A TAZZA SPRING WASHERS RONDELLES BELLEVILLE TELLERFEDERN VITE DI FERMO E FERMO PIN AND STOP PIN PLONT ET PLOT D ARRET ANSCHLAGBOLZEN DADO CONTRODADO NUT LOCK NUT ECROU CONTRE-ECROU MUTTER KONTERMUTTER LEVA WRENCH LEVIER HANDHEBEL VITE SCREW VIS SCHRAUBE MATERIALI MATERIALS MATERIAUX WERKSTOFFE P.T.F.E. P.T.F.E. / GRAFITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHIT ASTM A C72/50Cr V4 X5CrNi17.7 or X12CrNi17.7 UNI GALVANIZED - ON REQUEST GALVANIZED - UNI 3951 A2-70 ON REQUEST UNI S GALVANIZED ASTM A ON REQUEST AISI 1010 GALVANIZED ASTM A ON REQUEST UNI GALVANIZED - UNI 3951 A2-70 ON REQUEST * RICAMBI CONSIGLIATI RECOMMENDED SPARE PARTS PIECES DE RECHANGE CONSEILLEES ERSATZTEIL EMPFEHLUNG DIMENSIONI DIMENSION DIMENSIONS ABMESSUNGEN DN A B C D 46 48, E F M5 M5 M5 M5 M6 M6 M8 M8 M8 M10 M12 M16 ISO F03 F03 F03 F03 F05 F05 F07 F07 F07 F10 F12 F14 G H L M N P 32, , ,5 113, R S T ~Kg 2,7 3,6 4,5 6,2 9 14,3 21, ~Kg DATI E CARATTERISTICHE SOGGETTI A VARIAZIONI SENZA PREAVVISO SPECIFICATIONS SUBJECT TO MODIFICATIONS WITHOUT PRIOR NOTICE TOUS DROITS DE MODIFICATION RESERVES KONSTRUKTIONSÄNDERUNGEN VORBEHALTEN ASTM A105 ASTM A 351 CF8M ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com
4 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN ONLY FOR VALVES DN 50 FORO DI BILANCIAMENTO BALANCING HOLE TROU DE BALANCEMENT DRUCKENTLASTUNGSBOHRUNG ON REQUEST AVAILABLE ON DN 40 EXECUTION 4-12 EXECUTION 6-16 STANDARD OPTIONAL CERTIFICATE ON REQUEST STAINLESS STEEL ASTM A DN ASTM A351 CF8 DN PN STELO ANTI ESPULSIONE -TIGE ANTIEXPULSION -ANTI BLOW OUT STEM -AUSBLASGESICHERTE WELLE KEY TORQUE BREVETTO PATENTED PACCO A V -JOINT A V -CHEVRON RINGS -3 FACHE DACHMANSCHETE ANTISTATIK VORRICHTUNG BS O RING STELO O RING ON STEM -TIGE AVEC O RING - O RING IM SPINDELBEREICH
5 -PROLUNGA STELO -STEM EXTENSION -TIGE PROLONGEE -SPINDELVERLÄNGERUNG -PARTICOLARI INOX -STAINLESS STEEL DETAILS -ACCESSOIRES EN INOX -EDELSTAHLTEILE -ATTACCO ISO -SYSTEM ISO - ISO CONNECTIONS -ANSCHLUSS ISO ADLER FIRE SAFE ISO ISO-FT (BS 6755 / API 607) UNA GAMMA COMPLETA PRIVILEGIANDO LA QUALITA A COMPLETE RANGE PRIVILEGING THE QUALITY -TENUTE INTEGRALE -POCKETLESS SEATS -TENUE INTEGRALE -TOTRAUMARM -P.T.F.E. / R.T.F.E. VEDERE / SEE ANSI B16.34 BREVETTO PATENTED DOPPIA TENUTA -DOUBLE ETANCHEITE DOUBLE SEALS -DOPPELTE ABDICHTUNG LATERALE A BATTUTA -METAL BEATING END -LATERAL AVEC BATTUE MECANIQUE -METALLISCHER ANSCHLAG DES GEGENGEHÄUSES -FORO DI SCARICO NELLA SFERA -OVERPRESSURE HOLE INTO BALL -TROU DECOMPRESSION DANS LA BOULE -ENTLASTUNGSBOHRUNG IN DER KUGEL VALVOLA MONO DIREZIONALE MONO-DIRECTIONAL VALVE - SERVIZIO CRIOGENICO CRYOGENIC SERVICE - SERVICE CRYOGÉNIQUE - TIEFTEMPERATUR SERVICE -FIRE SAFE ISO FT+ O RING STELO -FIRE SAFE ISO FT+ O RING ON STEM -SECURITE FEU ISO FT+ TIGE AVEC O RING -FEUERSICHERE AUSFÜHRUNG ISO FT + O RING IM SPINDELBEREICH -TENUTA INTEGRALE METALLICA -METALLIC POCKET LESS SEATS -TENUE INTEGRALE METALLIQUE -TOTRAUMARM METALLISCH CERTIFICATE
6 DIMENSIONI FLANGE - FLANGE DIMENSION - DIMENSIONS BRIDES - FLANSCHANSCHLUSSMASSE RF ANSI B16.5 DN Ref. ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ D C K N f b e EN (OPTIONAL) DN Ref PN 10 PN 16 PN 25 PN 40 * n 8 fori D C K N * f b D C K N * F b D C K N f b D C K N f b
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA UNI EN 558-1 SPLIT BODY
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE
PN 10-40 VALVOLE A SFERA UNI EN 558-1 SPLIT BODY PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA ANSI B SPLIT BODY PASSAGGIO TOTALE
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE INGLINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA
FN2 TYPE PN PN On request FIRE SAFE According to ISO ISO-FT
WWW.ADLERSPA.COM PN 10-40 PN 63-160 BALL VALVES UNI EN 558-1 FULL BORE SPLIT BODY ROBINETS A BOULE UNI EN 558-1 PASSAGE INTEGRAL 2 PIECES FLANSCHKUGELHÄHNE IN UNI EN 558-1 VOLLER DURCHGANG ZWEITEILIGES
VALVOLE A SFERA ANSI B16.10 SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B16.10 SPLIT BODY
VALVOLE A SFERA UNI EN SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA UNI
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE B.W. S.W. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7-1 ANSI B NPT S.W. B.W.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE BW SW
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2 issued
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B NPT
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B NPT
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO SPLIT BODY
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE
FB2 VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01 issued by L.R.V. ISO 15848 nbr I-148466/1-/2 issued
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE
ISO 9001:00 by L.R. PED DIR. 97/3/EC by L.R. ISO 154 by TÜV FA NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf
ROBINETS A BOISSEAU SPHERIQUE 3 VOIES WAFER PASSAGE INTEGRAL 90 AVEC ENVELOPPE KUGELHÄHNE "3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 90 MIT HEIZMANTEL
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90. ISO nbr LRC QSM issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO SPLIT BODY
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
VALVOLE A SFERA 4 VIE CON SFERA A X
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 4
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO SPLIT BODY
BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOULE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90
ISO 9001:2008 by L.R. WWW.ADLERSPA.COM BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOULE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 ISO nbr LRC 0160281 QMS issued by L.R.Q.A.
VALVOLE A SFERA CORPO PIATTO SPLIT BODY PASSAGGIO TOTALE CON CAMICIA DI RISCALDAMENTO
ISO 9001:00 by L.R. PED DIR. 97/3/EC by L.R. ISO 154 by TÜV FX NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
RT7 BALL VALVES "4 WAY" WITH X BALL ROBINETS A BOULE "4 VOIES" AVEC BOULE A X KUGELHÄHNE "4 WEGE" MIT X KUGEL TYPE PN
ISO 9001:2008 by L.R. WWW.ADLERSPA.COM BALL VALVES "4 WAY" WITH X BALL KUGELHÄHNE "4 WEGE" MIT X KUGEL ISO nbr LRC 0160281 QMS issued by L.R.Q.A. ATEX nbr 40.2003.4392 issued by B.V. PED nbr COV 0212112/01
ISO nbr LRC QMS issued by L.R.Q.A. PED nbr COV /01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90 CON CAMICIA DI RISCALDAMENTO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:
ISO 9001:2008 by L.R. FT4 PN 10 40 ANSI 150 300* NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf
Features BALL VALVES. Split Wafer. Carbon steel wafer PN ANSI 600 STANDARD FEATURES FEATURES ON REQUEST
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
Features BALL VALVES. Thor Split Body Stainless steel PN ANSI 600 STANDARD FEATURES CERTIFICATIONS ENGINEERING STANDARD
OMAL S.p.a. Via Ponte Nuovo, 11-25050 Rodengo Saiano (BS) ITALY Phone +39 0308900145 - Fax +39 0308900423 Booked in the Enterprise Register of: Brescia number 1661640175 Share capital completely deposited:
Materials : Carbon steel or Stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 250 mm Between flanges PN16/40-28 C + 200 C Max Pressure : 40 Bars up to DN80, 16 bars over Specifications : With ISO 5211 mounting pad Contents
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Flanges R.F. Class 300 (PN50) - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire
Materials : Forged carbon steel or stainless steel
Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" to 8" ) ISO PN50 ANSI 300 R.F. - 28 C + 200 C Max Pressure : 50 Bars Specifications : With ISO 5211 mounting pad Fire safe BS 6755-2
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D
Valvola a sfera sanitaria manuale. Manual sanitary ball valve
Valvola a sfera sanitaria manuale Manual sanitary ball valve Valvola a sfera sanitaria manuale Manual sanitary ball valve elemento element qtà quantity Elenco parti / Parts list descrzione description
3 MASTER STAR & 1 SUPER STAR
APPROVAL CERTIFICATE No. LRC 004 MASTER STAR & SUPER STAR FORGED STEEL BALL VALVES PED / EC ATEX 4/ CE 00 Certificate N : RPS 0004/0 Tech. File N ST0 ATEX P0 P0 MAC/0//TO/ MAC/0//TO/ D0 MASTER STAR CONSTRUCTION
UNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE
GLOBE CONTROL VALVES FOR CRYOGENIC SERVICE 1-6940 Cryo valves are especially designed for cryogenic service. The construction is the same of 1-6941 and 1-6943 standard globe valves with the exception of
BALL VALVE SERIES Pneumatic actuator - Actreg
FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -
SKU: AB4291. Pneumatic Actuated Ball Valve for Higher Temperatures
SKU: AB4291 VOLT Pneumatic Actuated Ball Valve for Higher Temperatures VOLTPneumatisch betätigte Kugelhahn für höhere Temperatur VOLT Válvula de bola con actuador neumático para mayor temperatura VOLT
VILLA VALVOLE Sez. D
VIA VAVOE Sez. D Valvole a valves VAVOE A SFERA A MANICOTTI BA VAVES SCREWED ENDS in bronzo e in ottone bronze - brass Pag. 2 in acciaio inox stainless steel Pag. 3 in acciaio inox in tre pezzi Stanless
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+ CARBON STEEL Type: ball valve ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar - 250 Bar
BALL VALVE SERIES Pneumatic actuator - Actreg
B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS
SKU: AB4290. Pneumatic Actuated Flanged Ball Valve for Higher Temperatures DIN PN16 ANSI 150
SKU: AB4290 VOLT Pneumatic Actuated Flanged Ball Valve for Higher Temperatures VOLT Pneumatische betätigte Flanschkugelhahn für Höhere Temperaturen VOLT Válvula de bola con bridas neumáticas accionadas
Trunnion Ball Valves
Ball Valves Ball Valves TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C Max Pressure : 20 Bars Specifications : ISO 5211
Ghibson Italia s.r.l. via Cassola 6/ Monteveglio (BO) Italy. Butterfly valves
HD series valve HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes 7 Pneumatic actuators
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1
Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : DN 15 to 150 mm ( NPS 1/2" to 6" ) Flanges ISO PN20 ANSI 150 R.F. - 10 C + 180 C 20 Bars ISO 5211 mounting pad PTFE filled
Fully Welded Ball Valves
Ball Valves Ball Valves FULLY WELDED type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high performance on thightness and low pressure
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
HD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4
HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes
VALVE WITH UV ELECTRIC ACTUATOR
762-763 VALVE WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 762-763+UV ball valve is dedicated to the automatic opening/shut-off of pipes carrying medium pressure unloaded industrial fluids. This full
TECHNICAL CATALOGUE BALL VALVES: IDEAL
TECHNICAL CATALOGUE BALL VALVES: TEC ITAP SpA, founded in Lumezzane (Brescia) in 1972, is currently one of the leading production companies in Italy of valves, fittings and distribution manifolds for
AISI316L 1/4 NPT Pressure Regulator R serie Regolatore di pressione da 1/4 NPT in AISI316L serie R
AISI316L 1/4 NPT Pressure Regulator R serie Regolatore di pressione da 1/4 NPT in AISI316L serie R Suitable for automation equipment to onshore, offshore, pharmaceutical, medical and food applications
Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges
Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization
Flanged Ball Valves KHBF / KHMF / KHMFF
Flanged Ball Valves KHBF / KHMF / KHMFF Model code (also order example) KHBF 16 PN040 11141 02 X... Designation KHBF = Block-type ball valve DN 16-25 (steel) KHMF = Sleeve-type ball valve DN 32-50 (steel)
BALL VALVE SERIES Electric actuator - El-O-matic
BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0
Ref FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:
FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in
2 PIECES BALL VALVE PN63
2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C
V Series Control Port Ball Valves
Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard
RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600
The ideal valve to minimize any risk of fugitive emissions from flanges in the natural gas and oil industry FEATURES GENERAL APPLICATION The Fig. 5600 valves have been designed for gas transportation and
Trunnion Ball Valves
Trunnion Ball Valves Trunnion Classification and Operating range TRUNNION type ball valves are cut off devices suitables for use both on natural gas distribution network and for liquid service when high
VALVE WITH UV ACTUATOR
CHARACTERISTICS The 3-way stainless steel 783-5+AP (L-port) and 784-6 +AP (T-port) ball valves are dedicated to the mixing, diverting or automatic discharging of industrial unloaded fluids. The valves
VALVOLE A SFERA A PASSAGGIO TOTALE, SERIE EXTRA PESANTE PN50 ( 9 filetti) Ball valves full bore, Extra Heavy Type (9 threads)
A PASSAGGIO TOTALE, SERIE EXTRA PESANTE PN50 ( 9 filetti) Ball valves full bore, Extra Heavy Type (9 threads) Caratteristiche tecniche Technical features Corpo e sfera : Ottone CW617N UNI EN 12165 Asta
IEC Automatic Drain Eccellente stabilità e ripetibilità. Compressed air, inert gases, sweet and sour gases Port thread / Connessioni
AISI316 1/4 NPT Instrument Filter Regulator FR serie Filtro Regolatore da 1/4 NPT in AISI316 serie FR Suitable for automation equipment to onshore, offshore, pharmaceutical, medical and food applications
Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends
SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)
516VX1VSSBIPD Pneumatic actuator - El-O-Matic
DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278
ACCESSORI ACCESSORIES
ACCESSORI ACCESSORIES A art. 556 ACCESSORI - Rubinetti portamanometri a tre vie costruzione in bronzo limite di impiego 16 bar / 80 C attacchi M F - - 1/2 - tipo C/FLANGIA - tipo C/FLANGIA E PREMISTOPPA
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G
VALVE WITH SA ELECTRIC ACTUATOR
752-753 VALVE WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 752-753+SA ball valve is dedicated to the automatic opening/shut-off of pipes carrying unloaded industrial fluids with a 16 bar maximum pressure.
Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1
Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully
BUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
Peter Meyer Ball valves Cryogenic
Peter Meyer Ball valves Cryogenic Features Swiss manufacturer One-piece body design Laser welded, whitout body seal Chambered seats Cryogenic extension Cavity pressure relief system Replaceable packing
BALL VALVE SERIES Pneumatic actuator - El-O-Matic
B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg
Stainless steel ASTM A351 CF8M
MADE OF STAINLESS... Certificate 3.1 Size : Connection end : Min Temperature : Max Temperature : DN 25 to 150 Flanges PN16 R.F. - 30 C + 150 C Max Pressure : 16 Bars Specifications : ISO mounting pad filled
NELES TRUNNION MOUNTED BALL VALVE SERIES D
NELES TRUNNION MOUNTED BALL VALVE SERIES D Metso's Neles series D is a trunnion mounted ball valve for demanding on/off and control applications. Valve series incorporates Metso's several decade experience
M21Fi ISO Ball Valve DN15 to DN150
Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 300 mm PN16/40 R.F. Flanges -50 C in SS and -20 C in carbon steel + 230 C Max Pressure : 40 Bars up to DN50, 16 Bars over
MADE OF STAINLESS...
MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( NPS 1/2" to 8" ) Class 150 (PN20) R.F. Flanges -50 C in SS and -29 C in carbon steel + 230 C Max Pressure : 20 Bars
* The sizing shown is based on air supply of 5.5 bar to pilot the actuator
Economy Pneumatic Actuated PVC-U Ball Valve Economy PVC-U ball valve Pneumatic Actuated EPDM / PTFE seals, seats Imperial, Metric or BSP end connections Sizes 1/2" to 4" Pressure range 10 Bar VOLT PVC-U
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to 100 mm Flanges R.F. PN40-20 C + 220 C Max Pressure : 40 Bars Specifications : ISO 5211 mounting pad PTFE filled with stainless
Stainless Steel Valves
Stainless Steel Valves A-261T Y-Strainer screwed end, PN40, PSI800 Investment casting body Maximum working temperature 230 C The end-to-end length conforms to DIN 3202, Part 4. M8series (PN40) Thread ends
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR
771 XS BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CHARACTERISTIC The 771 XS wafer ball valve is dedicated to the automatic shut-off of low and medium pressure industrial fluids lines up to 16 bar. The
SKU: PC4702. V Port Flanged Electro-Pneumatic Control Valve PN16 / ANSI 150
SKU: PC4702 VOLT V Sector Pneumatic Control Ball Valve PN16 / ANSI 150 1/2" - 6" V Port Flanged Ball Valve with Pneumatic Actuator and Positioner 1/2" - 6" V Anschluss mit Flansch Kugelhahn mit pneumatischem
GWC Valve International
GWC Valve International PROVEN TECHNOLOGY FOR INDIVIDUAL VALVE SOLUTIONS WORLDWIDE QUALITY VALVE PRODUCTS: BALL CAST STEEL FORGED STEEL BUTTERFLY PLUG WAFER CHECK NEEDLE & GAUGE F L O A T I N G B A L L
B V 4 S M A R T. Split body ball valve. Smart Design. Maximum certified Automation ready R T. Reduced weight traceability
B V 4 S M A R T Split body ball valve S Smart Design M Maximum certified Automation ready A R T Reduced weight traceability Table of contents Smart Design BV4 Smart - DIN F4 - AINSI 150 LBS Pag 3-4 - 5