BALL VALVE SERIES Electric actuator - El-O-matic

Size: px
Start display at page:

Download "BALL VALVE SERIES Electric actuator - El-O-matic"

Transcription

1 BALL VALVE SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3 95 6,88 3/4" 20 17,3 EL55 57,3 312,3 95 7,03 1" 25 18,7 EL55 58,7 58,7 95 7,39 1 1/4" 32 22,5 EL55 62,5 317,5 95 7,98 1 1/2" 40 25,1 EL55 65,1 320,1 95 8,78 2" 50 25,1 EL55 65,1 320,1 95 9,97 2 1/2" 65 40,2 EL150 90,2 382, ,84 3" 80 36,9 EL150 96,9 388, ,45 4" ,7 EL ,7 415,7 140,5 37,20 The electric actuator is calculated with a safety factor of 30% and max. differential pressure of 69 bar up to 2, 55 bar from 2 1/2. For standard working conditions. OPTIONS: 2 additional limit switches, potentiometer, speed control, positioner. 1 28/08/2017

2 THREE-PIECE BALL VALVE 350 SERIES GENERAL FEATURES: - Full bore - Locking device - Mounting flange according to ISO Anti-blow out stem - CE approval - EN material certificate FIGURE: 351BAIIT: BSP according to DIN EN BAIIT: BW according to ANSI B16.11 & DIN 3239 part 2 353BAIIT: SW according to ANSI B16.25 & DIN 3239 part 1 354BAIIT: NPT according to ASME B BAIIT: Extended BW according to ANSI B16.11 & DIN 3239 part 2 356BAIIT: Flanged PN25 / PN40 DESIGN STANDARDS Compliance ANSI B16.34, ANSI B16.25, ANSI B1.20, API 6D Actuator mounting flange ISO 5211 Marking ISO 5209, EN 19 TESTS AND CERTIFICATES Quality Assurance ISO 9001 Material certificate EN Pressure test API /09/2017

3 THREE-PIECE BALL VALVE 350 SERIES - Materials 1/4 ~ 2 Item Description Materials 1 Body A351 Gr CF8M 2 End cap A351 Gr CF8M 3 Ball Stainless steel Seat PTFE 5 Joint gasket PTFE 6 Stem seal PTFE 7 Stem Stainless steel Gland packing PTFE 9 Gland nut Stainless steel Stem washer Stainless steel Stem nut Stainless steel Handle Stainless steel Handel sleeve Vinyl 14 Locking device Stainless steel Bolt Stainless steel Bolt nut Stainless steel Bolt washer Stainless steel Stop pin Stainless steel Handle washer Stainless steel Anti-static device Stainless steel /09/2017

4 THREE-PIECE BALL VALVE 350 SERIES - Materials 2 1/2 ~ 4 Item Description Materials 1 Body A351 Gr CF8M 2 End cap A351 Gr CF8M 3 Ball A351 Gr CF8M 4 Stem Stainless steel Stem nut Stainless steel Belleville washer Spring steel AISI Lever Stainless steel Seat PTFE 9 Gland Stainless steel Stem packing RPTFE 11 Stem seal RPTFE 12 Lock washer Stainless steel Joint gasket PTFE 14 Bolt ASTM A193 B8 15 Stop pin Stainless steel Handle sleeve Vinyl 17 Bolt nut ASTM A Bolt washer Stainless steel Stem washer Stainless steel Locking device Stainless steel Anti-static device Stainless steel /09/2017

5 ØD A H B E J THREE-PIECE BALL VALVE 350 SERIES - Dimensions K ØI 4x C M L1 DIMENSIONS: (mm) Ø DN A B C D E H ØI J K L1 M ISO 5211 Kg 1/4" 8 29,5 17,3 M5 11,6 11,0 65 9,5 6, ,6 130 F03 0,6 3/8" 10 29,5 17,3 M5 12,7 11,0 65 9,5 6, ,6 130 F03 0,6 1/2" 15 29,5 17,3 M5 15,0 11,0 65 9,5 6, ,6 130 F03 0,6 3/4" 20 33,0 17,3 M5 20,0 11,0 68 9,5 6, ,0 130 F03 0,8 1" 25 39,0 18,7 M5 25,0 13, , ,9 160 F04 1,1 1 1/4" 32 41,0 22,5 M5 32,0 13, , ,5 160 F04 1,7 1 1/2" 40 47,0 25,1 M6 38,0 15, , ,2 185 F05 2,5 2" 50 55,5 25,7 M6 50,0 15, , ,6 185 F05 3,7 2 1/2" 65 71,5 42,6 M8 65,0 23, , ,0 260 F07 7,4 3" 80 84,5 39,3 M10 80,0 18, , ,0 260 F10 11,2 4" ,5 52,3 M10 100,0 34, , ,0 290 F10 20,3 4 04/09/2017

6 THREE-PIECE BALL VALVE 350 SERIES - Dimensions BSP/NPT BW DIN SW 37,5 Extended BW J 37.5 Flanged PN25/PN40 W1 W Ø QxN ØA1 d ØB2 ØA2 Ød ØA3 Ød ØB2 ØA2 Ød Ø T Ø P Ø R Ø C L1 L2 L3 LE LF DIMENSIONS: (mm) ØA1 Ød L1 ØA2 ØB2 L2 ØA3 L3 LE N ØP ØQ ØR ØT W W1 LF 1/4" 11,6 63,7 11,6 16,2 62,7 14,3 63,7 225 / / / / / / / / 3/8" 12,7 63,7 12,7 17,5 62,7 17,6 63,7 225 / / / / / / / / 1/2" 15,0 65,7 15,0 22,7 65,7 21,9 65, /4" 20,0 76,2 20,0 27,5 76,2 27,3 76, " 25,0 86,2 25,0 34,0 86,2 33,9 86, /4" 32,0 102,8 32,0 42,7 102,8 42,8 102, /2" 38,0 119,4 38,0 48,6 119,4 48,9 119, " 50,0 131,4 50,0 60,5 131,4 61,3 131, /2" 65,0 164,0 65,0 76,3 164,0 76,9 164, " 80,0 182,7 80,0 90,0 182,7 90,0 182, " 100,0 235,2 100,0 116,0 236,2 115,5 235, PRESSURE-TEMPERATURE CHART: Kv VALUES & TORQUES: Ø Kv (m³/h) T (Nm) 1/4" 6 7 3/8" 7 7 1/2" /4" " /4" /2" " /2" " " /09/2017

7 ELECTRIC ACTUATOR FIG. EL GENERAL FEATURES: - Rotation angle 90 ±3, adjustable by limit switches: 10 to Enclosure: IP65 (IP67 optional) - Working temperature: -20 C ~ 70 C - Electrical connection: 12 and/or 16 point terminal block - Limit switches: 4x SPDT V3 micro switches - Torque switches: 2x SPDT V3 micro switches (not on EL-55) - Heater - Emergency manual controls MOTOR VOLTAGES AND TYPES: EL: AC single phase: VAC 50/60 Hz (DIN connection) ELISO: AC single phase: VAC 50/60 Hz (ISO connection) ELL: DC: 24 VDC (DIN connection) ELLISO: DC: 24 VDC (ISO connection) ELH: AC three phase: VAC 50/60 Hz (DIN connection) ELHISO: AC three phase: VAC 50/60 Hz (ISO connection) DESIGN STANDARDS Coupling according ISO 5211, DIN 3337 TESTS AND CERTIFICATES Safety Quality Assurance ISO 9001 EMC Directives 2004/108/EC, Machinery directive 2006/42/EC 1 09/10/2015

8 ELECTRIC ACTUATOR Materials - FIG. EL /10/2015

9 ELECTRIC ACTUATOR Materials - FIG. EL MATERIALS: Item Description Material 1 Housing Cast aluminium 2 Drive sleeve Cast iron or bronze 3 Gasket motor assembly 4 O-ring seal drive sleeve Nitrile rubber 5 Indicatorshaft Steel 6 Top spring indicator shaft Steel 7 Motor assembly 8 Motor worm Steel 9 Lock washer Steel 10 Motor plate screw Steel 11 Terminal strip Plastic 12 Heater 13 Limit switches 14 Capacitator (only 1Ph) 15 Torques switches 16 Dial Plastic 17 Cover Steel 18 Cover screw Steel 19 Lock washer Steel 20 O-ring seal Nitrile rubber 21 Worm cap Cast aluminium 22 Wormshaft Steel 23 Thrust bearing Steel 24 Torque spring Spring steel 25 Worm Steel 26 Wormwheel Steel 27 Handwheel Cast aluminium 28 Declutch spring Spring steel 29 Clutch ring Steel 30 Limit stop bolt Steel 3 09/10/2015

10 ELECTRIC ACTUATOR Dimensions - FIG. EL TYPE EL35 to EL800 - DIN CONNECTION: DIMENSIONS: (mm) TYPE A B C D F G H M EL ,5 EL EL EL , EL , EL EL TYPE O P V1 V2 W1 W2 DIN 3337 EL M6x12 M8x15 F05 / F07 EL M6x12 M8x15 F05 / F07 EL M6x12 M8x15 F05 / F07 EL M8x15 M10x18 F07 / F10 EL M8x15 M10x18 F07 F10 EL M10x18 - F10 EL M12x20 - F /10/2015

11 ELECTRIC ACTUATOR Dimensions - FIG. EL TYPE EL35 to EL800 - ISO CONNECTION: DIMENSIONS: (mm) TYPE A B C D F G H M EL ,5 EL EL EL , EL , EL EL TYPE O P V1 V2 W1 W2 ISO EL M6x12 M8x15 F05 / F07 EL M6x12 M8x15 F05 / F07 EL M6x12 M8x15 F05 / F07 EL M8x15 M10x18 F07 / F10 EL M8x15 M10x18 F07 F10 EL M10x18 - F10 EL M12x20 - F /10/2015

12 ELECTRIC ACTUATOR EL Technical information and options TECHNICAL INFORMATION: TYPE Torque Current (A) (Max.) Power (W) Speed (sec.) Break Run 230V AC 24V DC 230V AC 24V DC EL , EL ,5 1, EL , EL ,5 1, EL , EL ,5 1, EL ,5 2, TYPE Limit switches Torque SPDT at 110/240VAC Duty rating Kg EL 55 4x 16A - 30% 6,0 EL 100 4x 16A 2x 16A 30% 11,0 EL 150 4x 16A 2x 16A 30% 11,0 EL 200 4x 16A 2x 16A 30% 16,5 EL 350 4x 16A 2x 16A 30% 17,0 EL 500 4x 16A 2x 16A 30% 25,5 EL 800 4x 16A 2x 16A 30% 26,0 OPTIONS: Options (modules) Fig. Nr. 2 extra limit switches - Potentiometer ELOELPOT Speed controller ELOELSC Positionner ELOELMOD1 6 09/10/2015

BALL VALVE SERIES Electric actuator - El-O-matic

BALL VALVE SERIES Electric actuator - El-O-matic BALL VALVE - 350 SERIES Electric actuator - El-O-matic E D C B DIMENSIONS: (mm) Ø DN B EL C D E Kg 1/4" 8 17,3 EL55 57,3 312,3 95 6,89 3/8" 10 17,3 EL55 57,3 312,3 95 6,87 1/2" 15 17,3 EL55 57,3 312,3

More information

BALL VALVE SERIES Electric actuator - El-O-matic

BALL VALVE SERIES Electric actuator - El-O-matic BALL VALVE - 715 SERIES Electric actuator - El-O-matic E D C B A L DIMENSIONS: (mm) DN Ø A L B EL C D E Kg 15 1/2" 54,0 108 21,5 EL55 61,5 316,5 95 8,45 20 3/4" 60,0 117 26 EL55 66 321 95 8,95 25 1" 65,0

More information

BALL VALVE - 10 SERIES Electric actuator - El-O-Matic

BALL VALVE - 10 SERIES Electric actuator - El-O-Matic DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25

More information

BALL VALVE SERIES Pneumatic actuator - El-O-Matic

BALL VALVE SERIES Pneumatic actuator - El-O-Matic B C D E BALL VALVE - 350 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN B PD PE PD C D E F Kg PE C

More information

BALL VALVE SERIES Pneumatic actuator - El-O-Matic

BALL VALVE SERIES Pneumatic actuator - El-O-Matic C D E BALL VALVE - 390 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G

More information

BALL VALVE SERIES Pneumatic actuator - El-O-Matic

BALL VALVE SERIES Pneumatic actuator - El-O-Matic C D E BALL VALVE - 1370 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) Ø L C PD PE PD D E F Kg PE D E

More information

BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic

BALL VALVE - 340BA SERIES Pneumatic actuator - El-O-Matic C D E BALL VALVE - 30BA SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F DIMENSIONS: (mm) Ø DN C PD PE PD D E F Kg PE D E G

More information

BALL VALVE SERIES Pneumatic actuator - El-O-Matic

BALL VALVE SERIES Pneumatic actuator - El-O-Matic B C D E BALL VALVE - 730 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) Ø L A B PD PE PD C D E F Kg

More information

BUTTERFLY VALVE 17 SERIES Gearbox

BUTTERFLY VALVE 17 SERIES Gearbox DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2

More information

BALL VALVE SERIES Pneumatic actuator - Actreg

BALL VALVE SERIES Pneumatic actuator - Actreg FIGURE: ADA: Pneumatic actuator, double acting ASR: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BALL VALVE - 254 SERIES Pneumatic actuator -

More information

BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - El-O-Matic B C D BUTTERFLY VALVE - N123 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE

More information

BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE SERIES Pneumatic actuator - El-O-Matic B C D BUTTERFLY VALVE - 223 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B PD PE PD C D F Kg PE

More information

BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic B C D FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return BUTTERFLY VALVE - 18/28 SERIES Pneumatic actuator - El-O-Matic G F L The pneumatic actuator is calculated for 6

More information

BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg

BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg B C D BUTTERFLY VALVE - N1234 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F L DIMENSIONS: (mm) DN L B AD AS AD C D F Kg AS C

More information

BALL VALVE SERIES Pneumatic actuator - Actreg

BALL VALVE SERIES Pneumatic actuator - Actreg B C D E BALL VALVE - 516 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AD C D E F Kg AS C D

More information

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic

More information

516VX1VSSBIPD Pneumatic actuator - El-O-Matic

516VX1VSSBIPD Pneumatic actuator - El-O-Matic DN B 00 mm D E 56VXVSSBIPD Pneumatic actuator - El-O-Matic F E A L DIMENSIONS: (mm) DN L A B PD PE PD D E F Kg PE D E G Kg 5 5 53 6 25 266 286 59, 0 239 259 20 5,7 20 20 52 53 25 273 293 59, 65 258 278

More information

BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic

BALL VALVE HIT SERIES Pneumatic actuator - El-O-Matic B C D E BALL VALVE - 516 HIT SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PD C D E F Kg

More information

BALL VALVE SERIES Pneumatic actuator - El-O-Matic

BALL VALVE SERIES Pneumatic actuator - El-O-Matic B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - El-O-Matic FIGURE: PD: Pneumatic actuator, double acting PE: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B PD PE PD C D E F Kg

More information

BALL VALVE SERIES Pneumatic actuator - Actreg

BALL VALVE SERIES Pneumatic actuator - Actreg B C D E BALL VALVE - 1515 SERIES Pneumatic actuator - Actreg FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return G F A L DIMENSIONS: (mm) DN L A B AD AS AD C D E F Kg AS

More information

XS-F VALVE WITH SA ELECTRIC ACTUATOR

XS-F VALVE WITH SA ELECTRIC ACTUATOR 702-703XS-F VALVE WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 702-703 XS-F + SA valve is a ball valve dedicated to the automatic opening/shut off of industrial uncharged fluids below 137 bar and 220

More information

BUTTERFLY VALVE 1234P SERIES

BUTTERFLY VALVE 1234P SERIES FIGURE: AD: Pneumatic actuator, double acting AS: Pneumatic actuator, spring return ASRO: Pneumatic actuator, spring return, spring to open, air to close BUTTERFLY VALVE 1234P SERIES With pneumatic actuator

More information

K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180

K-BALL THREE PIECE HEAVY DUTY, REDUCED AND FULL BORE BALL VALVES SERIES 180 SERIES 180 R180/R180F Reduced Bore Design F180/F180F Full Bore Design FEATURES Ball valve designs with screwed or weld end connections. ISO 5211 top mounting plate for easy actuation. Investment cast body

More information

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends

Quarter Turn Ball Valve Systems 2 Pcs Body Design with Threaded Ends 2 Pcs Body Design with Threaded Ends Features Modular Program ball valve system igh quality investment cast stainless steel body and ends 2 pcs body full bore design, 2 way Blow out proof stem Disc spring

More information

VALVES WITH NA ELECTRIC ACTUATOR

VALVES WITH NA ELECTRIC ACTUATOR 505-507 VALVES WITH NA ELECTRIC ACTUATOR CHARACTERISTICS The 505+NA and 507+NA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.

More information

BUTTERFLY VALVES + NA ELECTRIC ACTUATOR

BUTTERFLY VALVES + NA ELECTRIC ACTUATOR 1150-1158 BUTTERFLY VALVES + NA ELECTRIC ACTUATOR CHARACTERISTICS The butterfly valves 1150 to 1158 are dedicated to the automatic opening/shut-off of various fluid pipes. It has a ductile iron body. Thanks

More information

M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40

M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Ball Valves in investment cast stainless 2-way

Ball Valves in investment cast stainless 2-way Ball Valves in investment cast stainless 2-way way, 3-piece construction Can be combined with 1000 / 800 PSI WOG Thread, socket and butt weld ends Full Port to Schedule 40 pipe Semi lugged body Blow-out

More information

VALVE WITH UV ELECTRIC ACTUATOR

VALVE WITH UV ELECTRIC ACTUATOR 762-763 VALVE WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 762-763+UV ball valve is dedicated to the automatic opening/shut-off of pipes carrying medium pressure unloaded industrial fluids. This full

More information

XS VALVE WITH SA05 / SA-X05 ELECTRIC ACTUATOR. Model/Ref:

XS VALVE WITH SA05 / SA-X05 ELECTRIC ACTUATOR. Model/Ref: 736-746XS VALVE WITH SA05 / SA-X05 ELECTRIC ACTUATOR Model/Ref: 272500023000 www.lauridsenindustri.com CHARACTERISTICS The 736XS (steel) and 746XS (stainless steel) + SA05 2-way ball valves are dedicated

More information

SERIES 7100 STANDARD PORT BALL VALVES

SERIES 7100 STANDARD PORT BALL VALVES SERIES 7100 STANDARD PORT BALL VALVES Publication S7100-101 Issue 12/14 Rev. C SERIES 7100 Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Stem 316 Stainless Steel ISO 5211 Mounting Plate Seat

More information

VALVE WITH SA ELECTRIC ACTUATOR

VALVE WITH SA ELECTRIC ACTUATOR 752-753 VALVE WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 752-753+SA ball valve is dedicated to the automatic opening/shut-off of pipes carrying unloaded industrial fluids with a 16 bar maximum pressure.

More information

VALVES WITH SA ELECTRIC ACTUATOR

VALVES WITH SA ELECTRIC ACTUATOR 505-507 VALVES WITH SA ELECTRIC ACTUATOR CHARACTERISTICS The 505+SA and 507+SA cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.

More information

EL5600 Series Electric Actuators for DN15 to DN100 Valves

EL5600 Series Electric Actuators for DN15 to DN100 Valves Page 1 of 5 TI-P358-07 CH Issue 8 Cert. No. LRQ 0963008 ISO 9001 EL5600 Series Electric s for DN15 to DN100 Valves Description The EL5600 series electric actuators are reversible having linear output.

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1

Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel ASTM A351 CF8M. Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 15 to 50 mm Flanges R.F. PN40-30 C + 220 C Max Pressure : 40 Bars Specifications : Antistatic device ISO 5211 mounting pad Anti blow-out stem Fully

More information

XS VALVES WITH SA ELECTRIC ACTUATOR. Model/Ref:

XS VALVES WITH SA ELECTRIC ACTUATOR. Model/Ref: 780-781XS VALVES WITH SA ELECTRIC ACTUATOR Model/Ref: 275400023010 www.lauridsenindustri.com CHARACTERISTICS The 780XS+SA L-port and 781 XS+SA T-port stainless steel 3-way ball valves are dedicated to

More information

M21Fi ISO Ball Valve DN15 to DN150

M21Fi ISO Ball Valve DN15 to DN150 Page 1 of 6 TI-P133-81 ST Issue 1 M21Fi ISO Ball Valve DN15 to DN150 Description The M21Fi is a reduced bore ball valve, with a single piece body, having ISO mounting as standard. It is designed to be

More information

STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE

STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure

More information

Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300 Ø P. N h. 4x900=360. n x Øs Ø 5 Ø P Ø R Ø T. n x ØS BALL VALVES ØP ØR ØT

Ø 5. L2 DN-300 (12 ) to DN-400 (16 Class-150 & 300 Ø P. N h. 4x900=360. n x Øs Ø 5 Ø P Ø R Ø T. n x ØS BALL VALVES ØP ØR ØT J H Ø T Ø R Ø 5 L2 DN-3 (12 ) to DN-4 (16 Class-1 & 3 DN-1 (6 ) to DN-3 ØI X B Y L Ø P M n x Øs B N h C 4x9=36 J Ø 5 Ø P I n x ØS ØP ØR ØT 1 J B C R3 BALL VALVES L M Ø T Ø R n x Øs I Ø5 5 R1 ØP Ø P L ISO

More information

Materials : Stainless Steel

Materials : Stainless Steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP, NPT, Socket or But Welding -20 C + 180 C Max Pressure : 63 Bars up to DN50 ( 40 bars over ) Specifications : ISO 5211 mounting

More information

DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC

DM2500 Series. Flanged Ball Valves SPECIFICATIONS ORDERING SCHEMATIC DM2500 Series Flanged Ball Valves SPECIFICATIONS Available in stainless steel or carbon steel Body and ends are investment cast Self-adjusting stem packing Blow-out proof stem design 100% air tested under

More information

VALVES WITH UV ELECTRIC ACTUATOR

VALVES WITH UV ELECTRIC ACTUATOR 505-507 VALVES WITH UV ELECTRIC ACTUATOR CHARACTERISTICS The 505+UV and 507+UV cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.

More information

M21Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN15 to DN150 Flanged PN40

M21Ti ISO Reduced Bore Ball Valve for the Tobacco Industry DN15 to DN150 Flanged PN40 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18)

CHEMAT. Two-Piece Ball Valves Series CAPRO type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) type 328 stainless steel, type 628 (carbon steel), DIN 3202 (F5)(F18) CHEMAT High quality requirements and technical standards of the chemical industry have been used as basic design parameters for these

More information

M21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40

M21Hi ISO Reduced Bore Ball Valve DN15 to DN150 Flanged PN40 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

VALVE WITH UV ACTUATOR

VALVE WITH UV ACTUATOR CHARACTERISTICS The 3-way stainless steel 783-5+AP (L-port) and 784-6 +AP (T-port) ball valves are dedicated to the mixing, diverting or automatic discharging of industrial unloaded fluids. The valves

More information

Materials : Carbon steel or Stainless steel

Materials : Carbon steel or Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 50 mm Threaded BSP or NPT, S.W. or B.W. -30 C in SS and -20 C in carbon steel + 220 C Max Pressure : 100 to 140 Bars Specifications : Antistatic

More information

PRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing

PRODUCT EVOLUTION. Be careful, our valves Ref.702 are changing PRODUCT EVOLUTION Be careful, our valves Ref.702 are changing We currently have 2 different types available (according to DN) with different dimension and non-commutable gaskets Old marking : New marking

More information

Electric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe

Electric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe Electric Actuated Butterfly Valves Ductile Iron Wafer Body ANSI/ASME 150 lb 2 to 6 inch Pipe SERIES Features Wafer butterfly valve with ISO5211 direct mount actuator Unique wave line seat reduces torque

More information

502 VALVE WITH UM1.5 ELECTRIC ACTUATOR. Model/Ref:

502 VALVE WITH UM1.5 ELECTRIC ACTUATOR. Model/Ref: Model/Ref: 270090022000 www.lauridsenindustri.com CHARACTERISTICS The 502+UM1.5 is a 2-way brass ball valve dedicated to the automatic shut-off of non-corrosive common fluids: water, air, hydrocarbons,

More information

Electric Actuated Ball Valves 150# Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe

Electric Actuated Ball Valves 150# Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe 1/2 to 4 inch Pipe Features Direct mount ISO5211 Full Port stainless steel ball valve 2-piece ANSI Class 150 flanged body 275 PSI working pressure at 100 F (38 C) Highly visual dome style valve position

More information

WAYS BALL VALVES WITH ADA ACTUATOR

WAYS BALL VALVES WITH ADA ACTUATOR 783-786 3-WAYS BALL VALVES WITH ADA ACTUATOR MAIN CHARACTERISTICS The three-ways flanged ball valve type 783-785 à brides is dedicated to the mixing or deviating functions in process of fluids. With full

More information

Electric Actuated 3-Way Ball Valves T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT

Electric Actuated 3-Way Ball Valves T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT T-Port Diverter, Stainless Steel, Full Port 1/4 to 2 NPT Features Full Port direct mount 316 SS ball valve Functions as a diverter valve 1000 PSI working pressure at 100 F (38 C) Visual valve position

More information

FIG. EA PIECE FIRESAFE BALL VALVES

FIG. EA PIECE FIRESAFE BALL VALVES FIG. EA-305 3-PIECE FIRESAFE BALL VALVES AGA-APPROVED MANUAL & AUTOMATIC FIG. EA-305 BALL VALVE FIGURE NUMBERING SYSTEM E A 305 F C X SE BS SW BW FL EMICO BRAND VALVE SYMBOL SERIES NUMBER BODY MATERIAL

More information

10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction

10000F Series. High Pressure Ball Valve 6000 psi WOG (414 bar) Multiple End Connections Carbon, Stainless. Alloy Bar Stock Construction 1F-xxx Series Valve Quick Spec Product Scope Size Range 1/4" 2", (Sch 16 Pipe Bore) 2"Reduced; 3" Double Reduced Body Type 3-pc, non Swing-out design, Optional Ends Pressure Rating up to 6 psi WOG & up

More information

Electric Actuated Butterfly Valves Ductile Iron Wafer Body ASME 150# 2 to 6 Pipe

Electric Actuated Butterfly Valves Ductile Iron Wafer Body ASME 150# 2 to 6 Pipe 2 to 6 Pipe Features Direct mount wafer butterfly valve with ISO5211 mount 3-layer epoxy coated ductile iron body with 316 SS disc Unique wave line seat reduces torque and extends seal life Visual valve

More information

Electric Actuated Ball Valves 150 lb Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe Sizes

Electric Actuated Ball Valves 150 lb Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe Sizes Electric Actuated Ball Valves 150 lb Flanged Stainless Steel, Full Port 1/2 to 4 inch Pipe Sizes SERIES Features Direct mount Full Port 16 Stainless Steel ball valve 2-piece ANSI Class 150 flanged body

More information

Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves

Mark 9020 Series. Sanitary Valves Mark 9020 Sanitary Ball Valves. Sanitary Ball Valves Mark 9020 Series Sanitary Ball Valves The Mark 9020 Series ball valves take ASME BPE guidelines to heart. This valve was designed from the beginning to meet every aspect of ASME BPE 2007. From the materials

More information

Ball Valves & Accessories

Ball Valves & Accessories Ball Valves & Accessories 2 Proven quality since 1892 Econosto, part of the ERIKS group, has been offering a wide variety of engineered products since 1892. By focusing on technical superiority along with

More information

Motorized Butterfly Valve

Motorized Butterfly Valve Motorized Butterfly Valve Actuated butterfly valves FEATURES PRODUCT DATA Wide size range (DN 50 DN500) for PN16 type For On-Off Control Manual override non-clutch design. Manual operation can be operated

More information

VALVES WITH UM ELECTRIC ACTUATOR

VALVES WITH UM ELECTRIC ACTUATOR 505-507 VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 505+UM and 507+UM cast iron ball valves are dedicated to the automatic opening/shut-off of pipes carrying low pressure unloaded common fluids.

More information

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends SPECIFICATION See our full range online at: www.vip-ltd.co.uk Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends VIP Product Codes 04/0466 (BSP)

More information

Stainless Steel Valves

Stainless Steel Valves Stainless Steel Valves A-261T Y-Strainer screwed end, PN40, PSI800 Investment casting body Maximum working temperature 230 C The end-to-end length conforms to DIN 3202, Part 4. M8series (PN40) Thread ends

More information

BALL VALVE WITH ADA PNEUMATIC ACTUATOR

BALL VALVE WITH ADA PNEUMATIC ACTUATOR 702-703 BALL VALVE WITH ADA PNEUMATIC ACTUATOR DESCRIPTION The 702-703 ball valves are dedicated to the automatic shut off of industrial fluid s lines. It is a 3 pieces full valve with internal screws

More information

Bushing Viton O-ring (Other material available) Anti-Static Device

Bushing Viton O-ring (Other material available) Anti-Static Device Triac 88 Series 3 -Piece Ball Valves feature a direct mount automation pad. The high quality investment castings feature a fully machined bore. The superior live-loaded packing system is accomplished with

More information

PRODUCE EVOLUTION. Be careful, our valves Ref are changing

PRODUCE EVOLUTION. Be careful, our valves Ref are changing ATEX DIN M3 PRODUCE EVOLUTION Be careful, our valves Ref.704-706 are changing We currently have 2 different types available (according to DN) with different dimensions and ATEX certification for the new

More information

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES SHARPE HIGH PERFORMANCE S Sharpe 77-3 & 4 Way Ball Valves offer as standard features, advantages that other valve manufacturers offer only as costly extras. This is the Sharpe advantage. STANDARD FEATURES

More information

Concentric butterfly valves

Concentric butterfly valves Lug Between flanges PN10/16 1135 Lever Disc GGG40 nickel plated / Seat EPDM.../10: flanges PN10.../16: flanges PN16 DN 40 50 65 80 100 125 150 200/10 200/16 250/10 250/16 300/10 300/16 16 16 16 16 16 16

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel

Size : Ends : Min Temperature : Max Temperature : Materials : Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking

More information

Ref FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:

Ref FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref: FIRE SAFE BALL VALVE ISO PN50 ANSI 300 Model/Ref: 768-769 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN50 ANSI300 R.F. Flanges -50 C in

More information

2 PIECES BALL VALVE PN63

2 PIECES BALL VALVE PN63 2 PIECES BALL VALVE PN63 Model/Ref: 756-757 www.lauridsenindustri.com Size : Ends : Min Temperature : Max Temperature : DN 15 to 200 mm ( 1/2" à 8 ) ISO PN20 ANSI150 R.F. Flanges -50 C in SS and -29 C

More information

METAL TO METAL BALL VALVES CATALOGUE

METAL TO METAL BALL VALVES CATALOGUE METAL TO METAL BALL VALVES CATALOGUE INDEX JC-TL IN THE WORLD FLOATING AND SEMI TRUNNION BALL VALVES - FIG. 515/530 - ASME-EN-STANDARD. TRUNNION FORGED BALL VALVES - FIG. 6015/6030 - ASME-API-EN STANDARD.

More information

DN 1/4 to 4 Threaded BSP or NPT - 20 C C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore

DN 1/4 to 4 Threaded BSP or NPT - 20 C C Max Pressure : 63 Bars ( up to DN 3/4 ) Specifications : Anti blow-out stem Locking device Full bore Size : Ends : Min Temperature : Max Temperature : DN 1/4 to 4 Threaded BSP or NPT - 20 C + 180 C Max Pressure : 63 Bars ( up to DN 3/4" ) Specifications : Anti blow-out stem Locking device Full bore Materials

More information

VALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67

VALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67 VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control

More information

DRAFT August 12, :56 PM

DRAFT August 12, :56 PM DRAFT August, 04 3:56 PM SERIES 7000/8000 3 PIECE FULL PORT 4-7000 - 36SS 8000 - WCB 7000/8000 SERIES BALL VALVES Flow-Tek s Series 7000 and 8000 ball valves offer the highest flexibility in selection

More information

SERIES 7200 FULL PORT BALL VALVES

SERIES 7200 FULL PORT BALL VALVES SERIES 7200 FULL PORT BALL VALVES Publication S7200-101 Issue 05/16 Rev.F Design Body Stainless Steel (A351-CF8M) Carbon Steel (A216-WCB) Stem 316 Stainless Steel ISO 5211 Mounting Plate Seat TFM* RPTFE

More information

For ball valves

For ball valves Soft seal Ball valve Float ball valve Flange PN16-40 DN15-200 For 1.4408 ball valves Range of application: In industrial facilities, oil and chemical industry and related manufacturing industries Temperature

More information

Cast Iron Valves. Product Information. It s all at Albion

Cast Iron Valves. Product Information. It s all at Albion Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS

More information

XS VALVES WITH UM ELECTRIC ACTUATOR

XS VALVES WITH UM ELECTRIC ACTUATOR 780-781XS VALVES WITH UM ELECTRIC ACTUATOR CHARACTERISTICS The 780XS+UM L-port and 781 XS+UM T-port stainless steel 3-way ball valves are dedicated to the mixing, diverting or automatic discharging of

More information

VALVES WITH SA03 ELECTRIC ACTUATOR

VALVES WITH SA03 ELECTRIC ACTUATOR 513-514 VALVES WITH SA03 ELECTRIC ACTUATOR CHARACTERISTICS The 513+SA03 L-port and 514+SA03 T-port stainless steel 3-way ball valves are dedicated to the mixing, diverting or automatic discharging of industrial

More information

AEL5 Series Electric Linear Actuators for DN15 to DN100 Control Valves

AEL5 Series Electric Linear Actuators for DN15 to DN100 Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

BALL VALVES - MULTIWAY AND DEADMAN

BALL VALVES - MULTIWAY AND DEADMAN BALL VALVES - MULTIWAY AND DEADMAN QUALITY VALVE MANUFACTURER Contents Spring Return Deadman Handle KI Series Spring Return Deadman Handle 76-500 Series Spring Return Deadman Handle DH Series Fusible Link

More information

TRUNNION BALL VALVES. TBV 7.10

TRUNNION BALL VALVES.     TBV 7.10 TRUNNION BALL VALVES WWW.VALVE.COM TBV 7.10 ABOUT US Our mission at Universal Flow (), is to provide a quality product at a competitive price and to meet the needs and requirements of our customers in

More information

ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design

ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design TM ISV Series BF1BU Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design For Oil & Gas Production, Chemical, Petro-Chemical & Industrial applications Sizes 1/2 through

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

Materials : Carbon steel or Stainless steel

Materials : Carbon steel or Stainless steel Size : Ends : Min Temperature : Max Temperature : DN 15 to 100 mm Flanges R.F. PN40-20 C + 180 C Max Pressure : 40 Bars Specifications : 3 pieces type PTFE filled with 15% glass fiber seat Anti blow-out

More information

M10F Ball Valve DN¼" to DN2½"

M10F Ball Valve DN¼ to DN2½ Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges

Ball Valve VM Options. General. Modular selection of system components. steel or stainless steel DN PN 100/40 flanges Ball Valve VM 4460-4466 steel or stainless steel DN 15-200 PN 100/40 flanges General 2-piece ball valve with a unique sealing element design. Modular selection of system components. Supports pressurization

More information

Size : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel

Size : Ends : Min Temperature : Max Temperature : Materials : Carbon or stainless steel Size : Ends : Min Temperature : Max Temperature : DN 8 to 100 mm Threaded BSP or NPT, Socket or Butt Welding -20 C + 180 C Max Pressure : 63 Bars up to DN20 Specifications : Anti blow-out stem Locking

More information

Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve

Item 305D-CRYOGENIC 3-PC Cryogenic Ball Valve Item 5D-RYOGENI 3-P ryogenic Ball Valve LASS 600/ 00/ 260WOG/ PN 0 SIZE: /2"-" SPEIFIATION * MSS SP-, 2006 cryogenic standard * Suitable for -6 working condition * Body & end caps quality investment casting

More information

Electric Actuated 3-Way Ball Valves T-Port, Stainless Steel, Full Port 1/4 to 2 inch NPT

Electric Actuated 3-Way Ball Valves T-Port, Stainless Steel, Full Port 1/4 to 2 inch NPT Electric Actuated 3-Way Ball Valves T-Port, Stainless Steel, Full Port 1/4 to 2 inch NPT SERIES Features Full Port 316SS diverter valve Polyamide IP67 weatherproof enclosure with UV protection Multi-voltage

More information

BR 14b / BR 14c Application:

BR 14b / BR 14c Application: High - Performance Butterfly valve BR 14b / BR 14c Application: Tight-closing, double-eccentric butterfl y control valve especially for the chemical industry where aggressive media s are used, for example

More information

HD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4

HD series. HD Series 1 technical data 1 components DN RTFE seat 2 Inconel seat 3 FIRE SAFE seat 4 HD series double eccentric HD Series 1 technical data 1 components DN 50-300 2 RTFE seat 2 Inconel seat 3 "FIRE SAFE" seat 4 tables dimensions 5 torque values 6 pressure / temperature 6 tests 6 Gearboxes

More information

ARI-STEVI 470 / ANSI (DN25-200)

ARI-STEVI 470 / ANSI (DN25-200) With pneumatic and electric actuators Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 - ANSI Pneumatic actuator ARI-DP 32-35 Reversible

More information

Butterfly Valve, Metal

Butterfly Valve, Metal utterfly Valve, Metal Construction GEMÜ type D480 is a butterfly valve with various versions. It is available in nominal sizes DN 25 1600, various body versions (Wafer, Lug and U section) and in a large

More information

PRODUCT EVOLUTION. Be careful, our valves Ref.730 are changing

PRODUCT EVOLUTION. Be careful, our valves Ref.730 are changing PRODUCT EVOLUTION Be careful, our valves Ref.730 are changing We currently have 2 different types available (according to DN) with different dimensions (but same face to face) and non-commutable gaskets

More information

ARI-STEVI 470 / 471 (DN15-150)

ARI-STEVI 470 / 471 (DN15-150) With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic

More information

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼ Ball Valves Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ - 4...3 316 Stainless Steel Technical Data 2160 PSI ¼ - 4...3 Style BVSC...4 Carbon Steel Technical Data 2200 PSI ¼ - 2...5

More information

Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15

Butterfly valves. Technical features 11 Coupling 12 Elements list 12 Tables 13 torque values 13 dimensions 15 TT series valve TT Series 1 technical data 1 components DN 50-300 Stainless steel disc Stainless steel + PTFE disc 3 components DN 350-500 Tables 5 dimensions 5 torque values Installation instructions

More information

BALL VALVE WITH ADA PNEUMATIC ACTUATOR

BALL VALVE WITH ADA PNEUMATIC ACTUATOR 762-763 BALL VALVE WITH ADA PNEUMATIC ACTUATOR MAIN CARACTERISTICS The 762-763 valve is a split body flanged ball valve dedicated to the automatic shut off of lines of standard fluids. With full bore construction,

More information