Output Power W HP VAC Hz A Three-Phase Three-Phase

Transcription

1 Induction 1 W, 3 W (1/75 HP, 1/25 HP) 6 W (1/125 HP) High Power Induction BH Series 2 W (1/4 HP) Frame Size: 14 mm ( 4.9 in.) Cable Type Right-Angle Hollow Shaft Terminal Box Type Parallel Shaft 15 W (1/5 HP) 25 W (1/3 HP) W (1/19 HP) Features High Power 2 W (1/4 HP) Smallest frame size among 2 W (1/4 HP) motors Hypoid Gear Right-Angle Gearheads Right-angle gearheads employ hypoid gears. Hollow shafts and solid shafts are available to enable space-saving. Tapped Hole at the Shaft End The gearhead shafts feature a tapped hole for convenient connection with loads. "Combination Type" for Easy Installation The combination type comes with the motor and gearhead pre-assembled. This enables easy installation in equipment. Combination Type: The combination type comes with the motor and its dedicated gearhead pre-assembled which simplifies installation in equipment. and gearheads are also available separately to facilitate changes or repairs. 6 W (1/12 HP) 9 W (1/8 HP) 2 W (1/4 HP) 2-Pole -15 W (1/19-1/5 HP) Specifications Continuous Rating Model Combination Type ( ) : Round Shaft Type Cable Type Terminal Box Type BHI62F- RH BHI62F- RA BHI62F- (BHI62F-A) BHI62E- RH BHI62E- RA BHI62E- (BHI62E-A) BHI62S- RH BHI62S- RA BHI62S- (BHI62S-A) BHI62FT- RH BHI62FT- RA BHI62FT- (BHI62FT-A) BHI62ET- RH BHI62ET- RA BHI62ET- (BHI62ET-A) BHI62ST- RH BHI62ST- RA BHI62ST- (BHI62ST-A) Output Power W HP VAC Hz A 2 1/4 2 1/4 2 1/4 Voltage Frequency Current Starting Torque Rated Torque Rated Speed Single-Phase 11 Single-Phase 115 Single-Phase 22 Single-Phase 23 Three-Phase Three-Phase 22 6 Three-Phase m oz-in m oz-in r/min μf The values for each specification applies to the motor only. Details of safety standards Page H-2 For detailed product safety standard information including standards, file number and certification body, please visit : Contains a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. When the motor temperature drops, the thermal protector closes and the motor restarts. Be sure to turn the motor power off before inspecting. Product ine Combination Type Right-Angle Shaft Type Voltage Model Gear Ratio Single-Phase 11/115 VAC BHI62F- RH Hollow Shaft Single-Phase 22/23 VAC BHI62E- RH Cable Three-Phase 2/22/23 VAC BHI62S- RH Single-Phase 11/115 VAC BHI62FT- RH Hollow Shaft Single-Phase 22/23 VAC BHI62ET- RH Terminal Box 5, 6, 7.5, 9, 12.5, Three-Phase 2/22/23 VAC BHI62ST- RH 15, 18, 25, 3, 36, Single-Phase 11/115 VAC BHI62F- RA 5, 6, 75, 9, 1, Solid Shaft Single-Phase 22/23 VAC BHI62E- RA 12, 15, 18 Cable Three-Phase 2/22/23 VAC BHI62S- RA Single-Phase 11/115 VAC BHI62FT- RA Solid Shaft Single-Phase 22/23 VAC BHI62ET- RA Terminal Box Three-Phase 2/22/23 VAC BHI62ST- RA The following items are included in each product., Gearhead,, Cap, Parallel Key, Operating Manual Only for single-phase motors 1 C-58 ORIETA MOTOR GEERA CATAOG 212/213 Page Features C-2 / System Configuration C-23 / Specifications C-58 / Product ine C-58 Dimensions C-6 / Connection Diagrams C-67 / and Gearhead Combinations C-69

2 Standard AC Parallel Shaft Type Voltage Model Gear Ratio Single-Phase 11/115 VAC BHI62F- Parallel Shaft Single-Phase 22/23 VAC BHI62E- Cable 3, 3.6, 5, 6, 7.5, 9, 12.5, 15, Three-Phase 2/22/23 VAC BHI62S- 18, 25, 3, 36, 5, 6, 75, Single-Phase 11/115 VAC BHI62FT- Parallel Shaft 9, 1, 12, 15, 18 Single-Phase 22/23 VAC BHI62ET- Terminal Box Three-Phase 2/22/23 VAC BHI62ST- The following items are included in each product., Gearhead,, Cap, Mounting Screws, Parallel Key, Operating Manual Only for single-phase motors Gearmotor Torque Table for Combination Type Round Shaft Type Type Voltage Model Single-Phase 11/115 VAC BHI62F-A Cable Single-Phase 22/23 VAC BHI62E-A Three-Phase 2/22/23 VAC BHI62S-A Single-Phase 11/115 VAC BHI62FT-A Terminal Box Single-Phase 22/23 VAC BHI62ET-A Three-Phase 2/22/23 VAC BHI62ST-A The following items are included in each product.,, Cap, Operating Manual Only for single-phase motors Enter the code that represents the terminal box type T in the box ( ) within the model name. Enter the gear ratio in the box ( ) within the model name. A colored background ( ) indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite direction. The speed is calculated by dividing the motor's synchronous speed (5 Hz: 15 r/min, 6 Hz: 18 r/min) by the gear ratio. The actual speed is 2 2% less than the displayed value, depending on the load. Decimal gearheads are not available for the BH series. Right-Angle Shaft 5 Hz Unit = Upper values: m/ower values: lb-in Speed Model r/min Gear Ratio BHI62E - RH, BHI62E - RA BHI62S - RH, BHI62S - RA Right-Angle Shaft 6 Hz Unit = Upper values: m/ower values: lb-in Speed Model r/min Gear Ratio BHI62F - RH, BHI62F - RA BHI62E - RH, BHI62E - RA BHI62S - RH, BHI62S - RA (2 VAC) BHI62S - RH, BHI62S - RA (22 VAC) BHI62S - RH, BHI62S - RA (23 VAC) Parallel Shaft 5 Hz Unit = Upper values: m/ower values: lb-in Speed Model r/min Gear Ratio BHI62E - BHI62S Parallel Shaft 6 Hz Unit = Upper values: m/ower values: lb-in Speed Model r/min Gear Ratio BHI62F -, BHI62E - BHI62S - (2 VAC) BHI62S - (22 VAC) BHI62S - (23 VAC) Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Synchronous Brake ow-speed Synchronous Watertight, Dust-Resistant Torque Right-Angle Gearheads inear Heads Brake Pack Accessories Installation CAD Data Manuals Technical Support TE: (8) techsupport@orientalmotor.com C-59

3 Induction 1 W, 3 W (1/75 HP, 1/25 HP) 6 W (1/125 HP) 15 W (1/5 HP) Permissible Overhung oad and Permissible Thrust oad Combination Type Page C-17 Round Shaft Type Page C-17 Permissible oad Inertia J of Gearhead Page C-18 Dimensions Unit = mm (in.) Mounting screws are included with the combination type, parallel shaft. Dimensions for mounting screws Page C W (1/3 HP) W (1/19 HP) Combination Type: Right-Angle, Hollow Shaft (Cable Type) BHI62F- RH, BHI62E- RH, BHI62S- RH Mass: 1. kg (22 lb.) : BHI62F-G2, BHI62E-G2, BHI62S-G2 Gearhead: BH6G2- RH A299 Key (Included) ( ) 8.36 ( ) ( ) 6 W (1/12 HP) 16 (6.3) Protective Earth Terminal M4 58 (25.4) 154 (6.6) 19.3 (4.3) 3 (1.18) 15 (.59) 1.5 (.6) 3 (1.18) 15 (.59) 1.5 (.6) 9 W (1/8 HP) 2 W (1/4 HP) 2-Pole -15 W (1/19-1/5 HP) 13 ( 4.6) 2.5 (.81) Cable ϕ7.8 (ϕ.31), 5 mm (2 in.) ength U Style 3271, AWG (1.28) 12 (4.2) ϕ (ϕ1.57) 16 (.63) 99 (3.9) 118 (4.65) 4 (.16) ϕ58.46 (ϕ ) (.9843 ) ±.5 (.31 ) (4.72±.2) 4.8 (.19) Flange Mounting Surface A A 14 (.55) Groove for Retaining Ring ϕ26.2 (ϕ1.3 ) 27 (1.6) A 28.3 (1.11) 14 (4.9) A 14 (4.9) 4 ϕ8.5 (ϕ.335) Thru 66 (2.6) C-6 ORIETA MOTOR GEERA CATAOG 212/213 Page Features C-2 / System Configuration C-23 / Specifications C-58 / Product ine C-58 Dimensions C-6 / Connection Diagrams C-67 / and Gearhead Combinations C-69

4 Standard AC Combination Type: Right-Angle, Solid Shaft (Cable Type) BHI62F- RA, BHI62E- RA, BHI62S- RA Mass: 1. kg (22 lb.) : BHI62F-G2, BHI62E-G2, BHI62S-G2 Gearhead: BH6G2- RA A3 16 (6.3) 154 (6.6) Protective Earth 58 (25.4) Terminal M4 Introduction Induction 13 ( 4.6) 2.5 (.81) Reversible Electromagnetic Brake Cable ϕ7.8(ϕ.31), 5 mm (2 in.) ength U Style 3271, AWG2 12±.5 (4.72±.2) 14 (.55) 27 (1.6) V Series Clutch & Synchronous Brake 14 (4.9) 16 (.63) 99 (3.9) 118 (4.65) 32.5 (1.28) 12 (4.2) M6 12 (.47) Deep 32 (1.26) ±.5 (1.57±.2) 4 (.16) 48 (1.89) ϕ22.21 (ϕ ) 24.5 (.96) ϕ58.46 (ϕ ) ow-speed Synchronous 14 (4.9) 4 ϕ8.5 (ϕ.335) Thru 66 (2.6) Watertight, Dust-Resistant Key and Key Slot (Included) 32±.2 (1.26±.8) 6.3 ( ) 6.3 ( ) ( ) Torque Right-Angle Gearheads At the time of shipment, a key is inserted on the gearhead s shaft. inear Heads Brake Pack Accessories Installation CAD Data Manuals Technical Support TE: (8) techsupport@orientalmotor.com C-61

5 Induction 1 W, 3 W (1/75 HP, 1/25 HP) 6 W (1/125 HP) 15 W (1/5 HP) 25 W (1/3 HP) Combination Type: Right-Angle, Hollow Shaft (Terminal Box Type) BHI62FT- RH, BHI62ET- RH, BHI62ST- RH Mass: 1. kg (22 lb.) : BHI62FT-G2, BHI62ET-G2, BHI62ST-G2 Gearhead: BH6G2- RH A31 13 ( 4.6) 16 (6.3) 154 (6.6) 16 (.63) 99 (3.9) 118 (4.65) Key (Included) 25.2 (.984.8) 19.3 (4.3) 3 (1.18) 15 (.59) 1.5 (.6) 7.36 ( ) 8.36 ( ) 3 (1.18) 15 (.59) 1.5 (.6) W (1/19 HP) 6 W (1/12 HP) 9 W (1/8 HP) 28 (1.1) max. 25 (.98) 75 (2.95) 9 (.35) 12 (4.2) (.31 ) ϕ (ϕ1.57) 4 (.16) ϕ58.46 (ϕ ) (.9843 ) 12±.5 (4.72±.2) 4.8 (.19) Flange Mounting Surface A A Groove for Retaining Ring ϕ26.2 (ϕ1.3 ) 62 (2.44) 43 (1.69) 2 W (1/4 HP) 2-Pole -15 W (1/19-1/5 HP) Use cable with a diameter of ϕ6 ϕ12 mm (ϕ.24 ϕ.47 in.). Details of terminal box Page C-283 A A 14 (4.9) 28.3 (1.11) 14 (4.9) 4 ϕ8.5 (ϕ.335) Thru 66 (2.6) C-62 ORIETA MOTOR GEERA CATAOG 212/213 Page Features C-2 / System Configuration C-23 / Specifications C-58 / Product ine C-58 Dimensions C-6 / Connection Diagrams C-67 / and Gearhead Combinations C-69

6 Standard AC Combination Type: Right-Angle, Solid Shaft (Terminal Box Type) BHI62FT- RA, BHI62ET- RA, BHI62ST- RA Mass: 1. kg (22 lb.) : BHI62FT-G2, BHI62ET-G2, BHI62ST-G2 Gearhead: BH6G2- RA A32 16 (6.3) 154 (6.6) Introduction Induction 16 (.63) 99 (3.9) 118 (4.65) Reversible Electromagnetic Brake 75 (2.95) 9 (.35) 12 (4.2) 32 (1.26) 4 (.16) 48 (1.89) ϕ22.21 (ϕ ) 24.5 (.96) ϕ58.46 (ϕ ) 62 (2.44) V Series Clutch & Synchronous Brake 14 (4.9) 13 ( 4.6) 28 (1.1) max. 25 (.98) M6 12 (.47) Deep ±.5 (1.57±.2) ϕ12±.5 (4.72±.2) 43 (1.69) ow-speed Synchronous Use cable with a diameter of ϕ6 ϕ12 mm (ϕ.24 ϕ.47 in.). Details of terminal box Page C (4.9) 4 ϕ8.5 (ϕ.335) Thru 66 (2.6) Watertight, Dust-Resistant Key and Key Slot (Included) Torque 32±.2 (1.26±.8) 6.3 ( ) 6.3 ( ) At the time of shipment, a key is inserted on the gearhead s shaft ( ) Right-Angle Gearheads inear Heads Brake Pack Accessories Installation CAD Data Manuals Technical Support TE: (8) techsupport@orientalmotor.com C-63

7 Induction 1 W, 3 W (1/75 HP, 1/25 HP) 6 W (1/125 HP) 15 W (1/5 HP) 25 W (1/3 HP) W (1/19 HP) 6 W (1/12 HP) 9 W (1/8 HP) Combination Type: Parallel Shaft (Cable Type) BHI62F-, BHI62E-, BHI62S- Mass: 8. kg (18 lb.) : BHI62F-G2, BHI62E-G2, BHI62S-G2 Gearhead: BH6G2- A33 13 ( 4.6) Cable ϕ7.8 (ϕ.31), 5 mm (2 in.) ength U Style 3271, AWG2 Protective Earth Terminal M4 16 (6.3) 72 (2.83) 42 (1.65) 1.5 (.41) 33.5±.5 5 (.2) (1.32±.2) 25 (.98) 2.5 (.81) 32.5 (1.28) 58 (2.28) 14 (.55) ϕ18.18 (ϕ.787.7) ϕ2 (ϕ.79) 2 (.79) M6 12 (.47) Deep 2.5 (.81) ϕ42(ϕ1.65) 5 (.2) max. Protective Earth Terminal M4 14 (4.9) 4 ϕ8.5 (ϕ.335) Thru 12±.5 (4.72±.2) 27 (1.6) 14 (4.9) 2 W (1/4 HP) 2-Pole -15 W (1/19-1/5 HP) Combination Type: Parallel Shaft (Terminal Box Type) BHI62FT-, BHI62ET-, BHI62ST- Mass: 8. kg (18 lb.) : BHI62FT-G2, BHI62ET-G2, BHI62ST-G2 Gearhead: BH6G2- A34 28 (1.1) max. 75 (2.95) 9 (.35) 25 (.98) 13 ( 4.6) 33.5±.5 (1.32±.2) 25 (.98) ϕ18.18 (ϕ.787.7) ϕ2 (ϕ.79) M6 12 (.47) Deep 2 (.79) 2.5 (.81) ϕ42 (ϕ1.65) 12±.5 62 (2.44) (4.72±.2) 14 (4.9) 43 (1.69) 16 (6.3) 1.5 (.41) 5 (.2) 72 (2.83) 42 (1.65) 4 ϕ8.5 (ϕ.335) Thru 14 (4.9) Use cable with a diameter of ϕ6 ϕ12 mm (ϕ.24 ϕ.47 in.). Details of terminal box Page C-283 Key and Key Slot (Included) 25±.2 (.984±.8) 6.3 ( ) 6.3 ( ) ( ) At the time of shipment, a key is inserted on the gearhead s shaft. C-64 ORIETA MOTOR GEERA CATAOG 212/213 Page Features C-2 / System Configuration C-23 / Specifications C-58 / Product ine C-58 Dimensions C-6 / Connection Diagrams C-67 / and Gearhead Combinations C-69

8 Standard AC Round Shaft Type (Cable Type) BHI62F-A, BHI62E-A, BHI62S-A Mass: 5. kg (11 lb.) A37 13 ( 4.6) 16 (6.3) 1.5 (.41) 32.5 Cable ϕ7.8, (ϕ.31), 5 mm (2 in.) ength (1.28) U Style 3271, AWG2 58 (2.28) 37 (1.46) 2 (.8) 14 (.55) 3 (1.18) 13 (.51) ϕ14.18 (ϕ ) ϕ94.35 (ϕ ) 14 (4.9) 5 (.2) max. Protective Earth Terminal M4 4 ϕ8.5 (ϕ.335) Thru 27 (1.6) 12±.5 (4.72±.2) Introduction Induction Reversible Electromagnetic Brake V Series Protective Earth Terminal M4 2.5 (.81) Round Shaft Type (Terminal Box Type) BHI62FT-A, BHI62ET-A, BHI62ST-A Mass: 5. kg (11 lb.) A38 28 (1.1) max. 25 (.98) 75 (2.95) 9 (.35) 43 (1.69) ϕ14.18 (ϕ ) 62 (2.44) Clutch & Synchronous Brake ow-speed Synchronous Watertight, Dust-Resistant 13 ( 4.6) 3 (1.18) 13 (.51) ϕ94.35 (ϕ ) 14 ( 4.9) 12±.5 (4.72±.2) Torque Right-Angle Gearheads Use cable with a diameter of ϕ6 ϕ12 mm (ϕ.24 ϕ.47 in.). Details of terminal box Page C (.41) 16 (6.3) 2 (.8) 37 (1.46) 4 ϕ8.5 (ϕ.335) Thru inear Heads Brake Pack Accessories Installation CAD Data Manuals Technical Support TE: (8) techsupport@orientalmotor.com C-65

9 Induction 1 W, 3 W (1/75 HP, 1/25 HP) 6 W (1/125 HP) 15 W (1/5 HP) 25 W (1/3 HP) (Included with single-phase motors) ϕ4.3 (ϕ.169) AMP#187 A 2 (.79) C B 7 (.28) 1 (.39) 4 (.16) B+15 (.59) R1 (R.39) 6 (.24) Dimensions Unit = mm (in.) Model Model A B C Cable Type Terminal Box Type BHI62F- RH BHI62F- RA BHI62F- BHI62F-A BHI62E- RH BHI62E- RA BHI62E- BHI62E-A BHI62FT- RH BHI62FT- RA BHI62FT- BHI62FT-A BHI62ET- RH BHI62ET- RA BHI62ET- BHI62ET-A CHCFA CH1BFAU 58 (2.28) 58 (2.28) 41 (1.61) 35 (1.38) 58 (2.28) 5 (1.97) Mass g (oz.) 175 (6.2) 132 (4.7) Cap Included W (1/19 HP) 6 W (1/12 HP) Mounting Method for Right-Angle, Hollow Shaft Types Page C W (1/8 HP) 2 W (1/4 HP) 2-Pole -15 W (1/19-1/5 HP) C-66 ORIETA MOTOR GEERA CATAOG 212/213 Page Features C-2 / System Configuration C-23 / Specifications C-58 / Product ine C-58 Dimensions C-6 / Connection Diagrams C-67 / and Gearhead Combinations C-69

10 Standard AC Connection Diagrams The direction of motor rotation is as viewed from the shaft end of the motor. represents the clockwise direction, while C represents the counterclockwise direction. Enter the voltage (F, E) in the box ( ) within the model name. Single-Phase Induction Three-Phase Induction Type Cable Type Terminal Box Type Cable Type Terminal Box Type BHI BHI BHI62 T-3 9 BHI62 T-5 18 BHI62S-3 9 BHI62S-5 18 BHI62ST-3 9 BHI62ST-5 18 Introduction Induction Reversible 1 (R) 2 (S) 3 (T) 1(R) 2(S) 3(T) U V W Electromagnetic Brake Combination Type: Parallel Shaft C C 1(R), 2(S) and 3(T). 1(R), 2(S) and 3(T). BHI BHI62 T BHI62S BHI62ST (S) 2 (R) 3 (T) 1(S) 2(R) 3(T) U V W V Series Clutch & Synchronous Brake ow-speed Synchronous Watertight, Dust-Resistant C : Protective Earth Connecting to the terminal Applicable lead wires: AWG24 12 Strip length: 8 mm (.315 in.) C 1(S), 2(R) and 3(T). 1(S), 2(R) and 3(T). ote Change the direction of single-phase motor rotation only after bringing the motor to a stop. If an attempt is made to change the direction of rotation while the motor is rotating, motor may ignore reversing command or change its direction of rotation after some delay. How to connect a capacitor Page C-282 Torque Right-Angle Gearheads inear Heads Brake Pack Accessories Installation CAD Data Manuals Technical Support TE: (8) techsupport@orientalmotor.com C-67

11 Induction 1 W, 3 W (1/75 HP, 1/25 HP) Type Single-Phase Induction Three-Phase Induction Cable Type Terminal Box Type Cable Type Terminal Box Type BHI62-5RH 18RH BHI62-5RA 18RA BHI62 T-5RH 18RH BHI62 T-5RA 18RA BHI62S-5RH 18RH BHI62S-5RA 18RA BHI62ST-5RH 18RH BHI62ST-5RA 18RA 6 W (1/125 HP) 15 W (1/5 HP) 25 W (1/3 HP) W (1/19 HP) 6 W (1/12 HP) 9 W (1/8 HP) 2 W (1/4 HP) 2-Pole -15 W (1/19-1/5 HP) Combination Type: Right Angle Shaft Round Shaft Type C C 1 (S) 2 (R) 3 (T) 1(S), 2(R) and 3(T). 1(S) 2(R) 3(T) U V W 1(S), 2(R) and 3(T). BHI62 -A BHI62 T-A BHI62S-A BHI62ST-A C C 1 (R) 2 (S) 3 (T) 1(R), 2(S) and 3(T). 1(R) 2(S) 3(T) U V W 1(R), 2(S) and 3(T). : Protective Earth Connecting to the terminal Applicable lead wires: AWG24 12 Strip length: 8 mm (.315 in.) ote Change the direction of single-phase motor rotation only after bringing the motor to a stop. If an attempt is made to change the direction of rotation while the motor is rotating, motor may ignore reversing command or change its direction of rotation after some delay. How to connect a capacitor Page C-282 C-68 ORIETA MOTOR GEERA CATAOG 212/213 Page Features C-2 / System Configuration C-23 / Specifications C-58 / Product ine C-58 Dimensions C-6 / Connection Diagrams C-67 / and Gearhead Combinations C-69

12 Standard AC ist of and Gearhead Combinations and gearhead combinations are shown below. Combination Type: Right Angle Shaft Model Model Gearhead Model BHI62F- RH BH6G2- RH BHI62F-G2 BHI62F- RA BH6G2- RA BHI62FT- RH BH6G2- RH BHI62FT-G2 BHI62FT- RA BH6G2- RA BHI62E- RH BH6G2- RH BHI62E-G2 BHI62E- RA BH6G2- RA BHI62ET- RH BH6G2- RH BHI62ET-G2 BHI62ET- RA BH6G2- RA BHI62S- RH BH6G2- RH BHI62S-G2 BHI62S- RA BH6G2- RA BHI62ST- RH BH6G2- RH BHI62ST-G2 BHI62ST- RA BH6G2- RA Accessories and Peripheral Equipment Speed Control Speed Controller Page D-178 Accessories Page C-263 Combination Type: Parallel Shaft Model Model Gearhead Model BHI62F- BHI62F-G2 BHI62FT- BHI62FT-G2 BHI62E- BHI62E-G2 BHI62ET- BHI62ET-G2 BH6G2- BHI62S- BHI62S-G2 BHI62ST- BHI62ST-G2 Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Synchronous Brake ow-speed Synchronous Watertight, Dust-Resistant Torque Right-Angle Gearheads inear Heads Brake Pack Accessories Installation CAD Data Manuals Technical Support TE: (8) techsupport@orientalmotor.com C-69