Current. Starting Torque. Rated Torque Single-Phase Three-Phase
|
|
- Tamsin Snow
- 6 years ago
- Views:
Transcription
1 Standard C s High Power Induction s BH Series 2 Frame Size: 14 mm Right-ngle Shaft Parallel Shaft Features BH Series High Power 2 Smallest frame size among 2 motors Hypoid Gear-Employed Right ngle Gearheads Right angle gearheads employ hypoid gears. Hollow shafts and solid shafts are available to enable space-saving. RoHS-Compliant BH Series conforms to the RoHS Directive that prohibits the use of six chemical substances including lead and cadmium. Details of RoHS Directive Page G-23 Specifications Continuous Rating Combination Type ( ): Round Shaft Type Output Power oltage C Frequency Hz Current Starting Torque m "Combination Type" for Easy Installation The combination type comes with the motor and gearhead pre-assembled. This enables easy installation in equipment. Combination Type: The combination type comes with the motor and its dedicated gearhead pre-assembled, which simplifies installation in equipment. s and gearheads are also available separately to facilitate changes or repairs. Rated Torque m Rated F Degree of Protection BHI62ET (BHI62ET-) IP54 BHI62ST- RH BHI62ST- R BHI62ST (BHI62ST-) IP54 The values for each specification applies to the motor only. Details of safety standards Page G-2 ist of safety standard approved products (, Standards, Standards File o., Certification Body) Page G-1 In addition to the products shown above, the products for single-phase 1 C, single-phase 11/115 C and single-phase 2 C are also available. Please contact the nearest Oriental sales office. Excluding the installation surface of the round shaft type. : Contains a built-in thermal protector (automatic return type). If a motor overheats for any reason, the thermal protector is activated and the motor is stopped. hen the motor temperature drops, the thermal protector closes and the motor restarts. Be sure to turn the motor off before inspecting. 2-Pole, High Product ine Combination Type Right-ngle Shaft Type oltage Gear Ratio Hollow Shaft Solid Shaft 22/23 C 2/22/23 C 22/23 C 2/22/23 C BHI62ST- RH BHI62ST- R The following items are included in each product., Gearhead,, Cap, Parallel Key, Operating Manual Only for single-phase motors Parallel Shaft Type oltage Gear Ratio 22/23 C 2/22/23 C BHI62ET- BHI62ST The following items are included in each product., Gearhead,, Cap, Mounting Screws, Parallel Key, Operating Manual Only for single-phase motors Round Shaft Type Type oltage 22/23 C 2/22/23 C The following items are included in each product.,, Cap, Operating Manual Only for single-phase motors BHI62ET- BHI62ST- -5 ORIET MOTOR GEER CTOGE Features -5 / System Configuration -21 / Specifications -5 / Product ine -5
2 Gearmotor Torque Table for Combination Type colored background ( ) indicates gear shaft rotation in the same direction as the motor shaft, while the others rotate in the opposite direction. The speed is calculated by dividing the motor's synchronous speed (5 Hz: 15, 6 Hz: 18 ) by the gear ratio. The actual speed is 2-2% less than the displayed value, depending on the load. Decimal gearheads are not available for the BH series. Right-ngle Shaft 5 Hz nit = m Gear Ratio , BHI62ST- RH, BHI62ST- R Right-ngle Shaft 6 Hz Peripheral Equipment Control Inverter Page -195 ccessories Page -229 nit = m Gear Ratio , BHI62ST- RH, BHI62ST- R (2 C) BHI62ST- RH, BHI62ST- R (22 C) BHI62ST- RH, BHI62ST- R (23 C) Standard C s Intro duction Induction s Reversible s Electromagnetic Brake s Right -ngle Gearheads Parallel Shaft 5 Hz nit = m Gear Ratio BHI62ET BHI62ST Parallel Shaft 6 Hz nit = m Gear Ratio BHI62ET BHI62ST- (2 C) BHI62ST- (22 C) BHI62ST- (23 C) Permissible Overhung oad and Permissible Thrust oad Combination Type Page -15 Round Shaft Type Page -15 Permissible oad Inertia of Gearhead: J Page -16 C Control s Inverter Brake Pack SB5 S ES2 FE1/FE2 atertight, Dust-Resistant s Torque s ccessories Installation Dimensions -52 / Connection Diagrams -55 / and Gearhead Combinations
3 Standard C s Dimensions (nit = mm) Mounting screws are included with the combination type, parallel shaft. Dimensions for mounting screws Page -246 Combination Type: Right-ngle, Hollow Shaft ( Type) Key (Included), BHI62ST- RH Mass: 1. kg 25.2 : BHI62ET-G2, BHI62ST-G2 Gearhead: BH6G2- RH BH Series max se cable with a diameter of 6 12 mm (h8) (H8) Thru Flange Mounting Surface Groove for Retaining Ring( 26.2 ) 2-Pole, High ORIET MOTOR GEER CTOGE Features -5 / System Configuration -21 / Specifications -5 / Product ine -5
4 Combination Type: Right-ngle, Solid Shaft ( Type), BHI62ST- R Mass: 1. kg : BHI62ET-G2, BHI62ST-G2 Gearhead: BH6G2- R Key and Key Slot (Included) t the time of shipment, a parallel key is inserted on the gearhead's shaft. Standard C s Intro duction Induction s 28 max (h7) (h8) 62 Reversible s Electromagnetic Brake s Right -ngle Gearheads Thru 66 se cable with a diameter of 6 12 mm. Combination Type: Parallel Shaft ( Type) BHI62ET-, BHI62ST- Mass: 8. kg : BHI62ET-G2, BHI62ST-G2 Gearhead: BH6G max se cable with a diameter of 6 12 mm. Key and Key Slot (Included) Thru t the time of shipment, a parallel key is inserted on the gearhead's shaft (h7) C Control s Inverter Brake Pack SB5 S ES2 FE1/FE2 atertight, Dust-Resistant s Torque s ccessories Installation Dimensions -52 / Connection Diagrams -55 / and Gearhead Combinations
5 Standard C s Round Shaft Type ( Type) BHI62ET-, BHI62ST- Mass: 5. kg 28 max BH Series 2-Pole, High se cable with a diameter of 6 12 mm (h7) 94.35(h7) 14 (Included with single-phase motors) MP#187 B 7 4 B 15 1 C R1 6 These figures below show how to mount loads depending on the shape of the shaft. The tolerance of the inner diameter for the hollow shaft is finished as H8, and "key slot" processing is given to mount the load shaft. The recommended tolerance of the load shaft is h7. pply a coating of molybdenum disulfide or similar grease to the surface of load-shaft and to the inner diameter of the load shaft to prevent binding. Recommended load shaft diameter is shown in the table on the right Thru 12.5 Dimensions (mm) B C BHI62ET- BHI62ET- Mounting Method for Right ngle, Hollow Shaft Type Stepped oad Shaft Hollow Shaft oad Shaft Spacer Flat asher Mass (g) CH1BF capacitor cap is included with a capacitor. Inner Diameter of Hollow Shaft and Recommended oad Shaft Diameter nit = mm BH6G2- RH.33 Inner Diameter of Hollow Shaft H8 25 Recommended oad Shaft Diameter h7 25 Straight oad Shaft Hollow Shaft oad Shaft.21 Spacer Flat asher Bolt (M6) Bolt (M6) Spring asher Retaining Ring for Hole Spring asher Retaining Ring for Hole Spacer fter securing a load, attach the safety cover included. otes: Be careful not to apply a shock to the hollow shaft when mounting a load shaft. It may damage the bearing inside the gearhead. Bolts or other fasteners used to install the load shaft are not included. These parts must be purchased separately. -54 ORIET MOTOR GEER CTOGE Features -5 / System Configuration -21 / Specifications -5 / Product ine -5
6 Connection Diagrams The direction of motor rotation is as viewed from the shaft end of the motor. represents the clockwise direction, while C represents the counterclockwise direction. Combination Type: Parallel Shaft Induction Induction BHI62ET-3 9 BHI62ET-5 18 C BHI62ET (R) 2(S) 3(T) BHI62ST-3 9 BHI62ST-5 18 BHI62ST Round Shaft Type Induction BHI62ET- C 1(R) 2(S) 3(T) Induction BHI62ST- Connecting to the terminal pplicable lead wires: G24 12 (.2 4. mm 2 ) Strip length: 8 mm otes: Change the direction of single-phase motor rotation only after bringing the motor to a stop. If an attempt is made to change the direction of rotation while the motor is rotating, motor may ignore reversing command or change its direction of rotation after some delay. Connect a CR circuit to protect the connector point of switches. Connecting CR circuit, contact capacity page -249 For added safety, provide a breaker or fuse on the power supply input. Standard C s Intro duction Induction s Reversible s Electromagnetic Brake s Right -ngle Gearheads C 1(S) 2(R) 3(T) Combination Type: Right ngle Shaft Induction Induction BHI62ET-5RH 18RH BHI62ET-5R 18R C BHI62ST-5RH 18RH BHI62ST-5R 18R 1(S) 2(R) 3(T) How to connect a capacitor page -247 ist of and Gearhead Combinations and gearhead combinations are shown below. Combination Type: Right ngle Shaft Type Gearhead Type BH6G2- RH BHI62ET-G2 BH6G2- R BHI62ST- RH BH6G2- RH BHI62ST-G2 BHI62ST- R BH6G2- R Combination Type: Parallel Shaft Type Gearhead Type BHI62ET- BHI62ET-G2 BH6G2- BHI62ST- BHI62ST-G2 BH6G2- Enter the gear ratio in the box ( ) within the model name. C Control s Inverter Brake Pack SB5 S ES2 FE1/FE2 atertight, Dust-Resistant s Torque s ccessories Installation Dimensions -52 / Connection Diagrams -55 / and Gearhead Combinations
Rated Torque. Current. Starting Torque Single-Phase Three-Phase
Standard C s High Power Induction s BH Series 2 Frame Size: 14 mm Right-ngle Shaft Parallel Shaft Features 6 15 25 4 6 9 2 BH Series High Power 2 Smallest frame size among 2 motors Hypoid Gear-Employed
More informationOutput Power W HP VAC Hz A Three-Phase Three-Phase
Induction 1 W, 3 W (1/75 HP, 1/25 HP) 6 W (1/125 HP) High Power Induction BH Series 2 W (1/4 HP) Frame Size: 14 mm ( 4.9 in.) Cable Type Right-Angle Hollow Shaft Terminal Box Type Parallel Shaft 15 W (1/5
More informationWatertight, Dust-Resistant. Motors. Standard AC Motors A-207. Standard AC Motors Intro duction. Motors. AC Speed Control Motors Inverter.
Standard AC Standard AC Intro duction Induction Reversible Electromagnetic Brake Right-Angle Gearheads SB5W US ES2 FE1/FE2 AC Speed Control Inverter Torque Accessories Installation A-27 Standard AC RoHS-Compliant
More informationAC Motor Systems. Speed Control Systems B-137. Speed Control Systems Introduction. BHF Series FE200 ES01/ US Series
AC Motor Systems Speed Control Systems Introduction BHF Series FE1/FE2 ES1/ES2 US Series FB FE1/ FE2 ES1/ ES2 US Installation Page BHF Series B-138 FE1/FE2 B-156 ES1/ES2 B-172 US Series B-22 B-137 RoHS-Compliant
More informationElectromagnetic. Brake Motors. Constant Speed Motors. Standard AC Motors A-109. Standard AC Motors Introduction. Brake Motors
Standard AC Constant Speed Standard AC Introduction Induction Reversible V Series Clutch & Synchronous Low-Speed Watertight, Synchronous Dust-Resistant Gearheads Page Features and Types of A-11 General
More informationInduction Motors. Standard AC Motors. Constant Speed Motors. Standard AC Motors C-19. Induction Motors
Standard AC Introduction Induction Induction Standard AC Constant Speed Induction Reversible Electromagnetic Brake Clutch & Synchronous Brake Low-Speed Synchronous Watertight, Dust-Resistant Gearheads
More informationBrake Pack SB50W. Standard AC Motors A-143. Standard AC Motors Intro duction. Brake Pack. AC Speed Control Motors Inverter.
Standard AC SB5W Standard AC Intro duction Induction Reversible Right -Angle Gearheads SB5W AC Speed Control Inverter SB5W US ES2 FE1/FE2 Watertight, Dust-Resistant Torque Accessories Installation A-143
More informationLow-Speed. Constant Speed Motors. Standard AC Motors A-203. Standard AC Motors Introduction. Low-Speed Synchronous Motors.
Standard C Constant Speed Low-Speed Synchronous Standard C Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Brake Synchronous Low-Speed Synchronous Low-Speed Synchronous Watertight,
More informationReversible Motors. Standard AC Motors. Constant Speed Motors. Standard AC Motors C-75. Reversible Motors
Standard AC Introduction Induction Standard AC Constant Reversible Reversible Reversible Electromagnetic Brake Clutch & Synchronous Brake Low- Synchronous Watertight, Dust-Resistant Torque Gearheads Linear
More informationLS Linear Heads. Standard AC Motors A-259. Standard AC Motors Introduction. Induction Motors. Reversible Motors. Brake Motors.
Standard C S inear Heads Standard C Introduction Induction Reversible Electromagnetic Brake V Series Clutch & Brake Synchronous ow-speed Watertight, Synchronous Dust-Resistant Torque Right-ngle Gearheads
More informationRoHS-Compliant. Watertight, Dust-Resistant Motors FPW Series
RoHS-Compliant Watertight, Dust-Resistant s FPW Series 1 RoHS-Compliant Watertight, Dust-Resistant s FPW Series Induction Type The FPW Series are geared motors which conform to the IEC standard IP67 (Recognized
More informationK Series. Next-Generation Right-Angle Shaft Geared Motors. Compact Standard AC Motors
Compact Standard C Motors K Series Induction Motors Hypoid Right-ngle Hollow Shaft JH Gear Hypoid Right-ngle Solid Shaft JL Gear 4 W 6 W 9 W Highly Efficient, Strong Next-Generation Right-ngle Shaft Geared
More informationTorque Motors 3 W, 6 W, 10 W, 20 W
Torque 3 W, 6 W, 1 W, W Connection Information Technical reference Page G-1 Safety standards Page H- Introduction These torque motors conform to safety standards. By providing an external voltage adjustment
More informationBLU Series. RoHS-Compliant. Brushless DC Motor and Driver Package. Features
RoHS-Compliant Brushless DC Motor and Driver Package BLU Series The BLU Series combines a brushless DC motor and a panel-installation type driver, enabling speed control via simple wiring and easy operation.
More informationConforms to Power Supply Voltages in Asia Induction Motors, Reversible Motors, and Electromagnetic Brake Motors
RoHS Directive-Compliant Standard AC Motors World K Series Conforms to Power Supply Voltages in Asia Induction Motors, Reversible Motors, and Electromagnetic Brake Motors New products that conform to power
More informationSingle Phase 110 Single Phase 115 Single Phase 220 Single Phase 230 Single Phase 230 Three Phase 200 Three Phase 200 Three Phase 220 Three Phase 230
INDUTION MOTORS Single-Phase, Three-Phase 9 (1/8 HP) Frame Size 3.54 in.sq.(9mm sq.) GER SFETY STD. Specifications ontinuous Rating Upper Name:Pinion Shaft Type Lower Name( ):Round Shaft Type Output Power
More informationStandard AC Motors. Single-Phase Induction Motors K Series. Three-Phase High-Efficiency Induction Motors. K S Series
Standard C s Single-Phase s K Three-Phase High-Efficiency s Since 188 Founded In 188. Legendary Craftsmanship. Oriental was founded in 188. We were successful in making the prototype of an electric motor
More informationStandard AC Motors C-9
Standard AC C-9 Overview, Product Standard AC Constant Speed Constant Speed Reversible Reversible Brake Brake Clutch & Brake Clutch & Brake Synchronous Synchronous Torque Watertight, Dust-Resistant Gearheads
More informationUS Series Single-Phase 110/115 VAC Single-Phase 220/230 VAC
RoHS-Compliant Speed Control Motor and Control Unit Package US Series Single-Phase 11/11 VAC Single-Phase 22/23 VAC RoHS-Compliant Speed Control Motor and Control Unit Package US Series Single-Phase 11/11
More informationAC Motor Systems US Series
US Series The US Series combines a control unit and an AC speed control motor. Connection between the motor and control unit is simplified by an easy-to-use connector. The US Series is designed for applications
More informationConstant Speed Motors
Standard AC Standard AC Constant Speed Brake High-Strength, Long Life, Low Noise V Series Constant Speed Torque Brake V Series TM Series Torque Features and Types of Constant Speed C-10 How to Read Specifi
More informationConstant Speed Motors
Standard AC Introduction Induction Induction Standard AC Constant Speed Reversible Brake Reversible Brake High-Strength, Long Life, Low Noise Clutch and Brake Synchronous Synchronous Clutch & Synchronous
More informationORIENTAL MOTOR CATALOGUE. Gearheads A-177. Features and Types A-178 Right-Angle Gearheads A-180. Standard AC Motors
ORIENTAL MOTOR CATALOGUE Standard AC Gearheads Features and Types A-7 Right-Angle Gearheads A-0 Brake FBL AXU AXH HBL MSS W ES US Gearheads Linear Heads Brushless Motor and Driver AC Speed Control Water
More informationFeatures. Structure. Safety Standards and CE Marking For -AWMU, -CWME, -SWM Type. Construction A ORIENTAL MOTOR GENERAL CATALOG
Electromagnetic Brake Motors This power off, electromagnetic brake coupled to reversible motors and induction motors (three-phase type) provides output of W W (three-phase: W W). These motors are best
More informationRoHS-Compliant Brushless Motor Systems FBL Series. Features
Speed Control Systems RoHS-Compliant Brushless Motor Systems FB Series The FB Series consists of a high performance, compact, brushless motor and driver. This product is available with 75 W (1/1 HP) and
More informationFE100/FE200. AC Speed Control Motors. Features
AC Speed Control Motors FE1/FE2 Additional Information Technical reference Page G-1 Safety standards Page H-2 The FE1/FE2 is a speed controller using inverter technology that enables speed control to be
More informationBLH. 24 VDC Input 15W / 30W / 50W / 100W BLH
BLH 24 VDC Input 15W / 30W / 50W / 100W BLH BLH BLH BLH BLH 2 3 System Configuration Geared Type/Combination Type Parallel Shaft Gearhead/Round Shaft Type The system configuration shown above is an example.
More informationInstallation. Standard AC Motors A-305. Standard AC Motors Introduction. Installation. Induction Motors. Reversible Motors.
Installation Introduction Synchronous Low-Speed Watertight, Synchronous Dust-Resistant Installation Heads Pack Accessories Installation A-35 Installation Handling the Handling Always carry the motor by
More informationLimit Switch A. Dog a
inear and Rotary Actuators RoHS-Compliant Rack and Pinion Systems S inear Heads Additional Information Technical reference Page F-1 2S 4S Vertical Stroke: F Type Horizontal Stroke: B Type Vertical Stroke:
More informationRight-Angle Gearheads
Brushless Motor and Driver AC Speed Control Standard AC Brake FBL AXU AXH HBL MSS W ES US Gearheads Linear Heads Water Tight FPW Right-Angle Gearheads Right-Angle gearheads are flange-mounted gearheads
More informationFeatures and Types A-178 Right-Angle Gearheads A-180
ORIENTAL MOTOR CATALOGUE Standard AC Gearheads Features and Types A-7 Right-Angle Gearheads A-0 Brake FBL AXU AXH HBL MSS W ES US Gearheads Linear Heads Brushless Motor and Driver AC Speed Control Water
More informationFE100/FE200. Inverter
RoHS-Compliant FE1/FE2 A new inverter that enables speed control to be set easily with a built-in digital display. The inverter parameters have been set exclusively for Oriental Motor's three-phase motors,
More informationHow to Read Gearhead Specifications Gearheads are shown for both AC standard motors and Speed Control Systems. Gearmotor Torque Table (Example)
How to Read Gearhead Specifications Gearheads are shown for both AC standard motors and Speed Control Systems. Gearmotor Table (Example) Single-Phase115/230 VAC, 60 Hz Speed r/min 600 5R90GU-AWU 5R90GU-AWTU
More informationRoHS-Compliant Brushless Motor Systems BLF Series. Features
Speed Control Systems RoHS-Compliant Brushless Motor Systems BLF Series The BLF Series brushless motor achieved a maximum motor speed of 4 r/min. With the digital operator, digital setting and display
More informationCOMPONENT Type SS21-UL Type
SPEED CONTROL MOTORS COMPONENT Type Type A tachogenerator built into induction motors, in combination with the specially designed control pack, allows multi-functional operation such as speed control,
More informationAccessories. Standard AC Motors A-247. Standard AC Motors Introduction. Flexible Couplings. Others
Standard AC Standard AC Introduction Induction Low-Speed Torque Motor & Synchronous Power Controller Watertight, Linear Reversible Electromagnetic Packages Torque Dust- Right-Angle Heads Brake SMK TM Resistant
More informationStandard AC Motors. Single-Phase Induction Motors. Series. Three-Phase High-Efficiency Induction Motors K S Series
Standard C Motors Single-Phase Motors K Three-Phase High-Efficiency Motors Since 188 Founded In 188. Legendary Craftsmanship. Oriental Motor was founded in 188. We were successful in making the prototype
More informationUS U. Speed Control Motors. Features. Safety Standards and CE Marking M o t o r. Product Number Code
Speed Control Motors US Series The US series combines a speed control motor and a control unit. The capacitor and the potentiometer have been integrated into one compact control unit. The series is designed
More informationRoHS-Compliant. Brushless DC Motor and Driver Package BX Series
RoHS-Compliant Brushless DC Motor and Driver Package BX Series RoHS-Compliant Brushless DC Motor and Driver Package BX Series The BX Series brushless DC motor and driver packages offer high performance
More informationStandard AC Motors E-75
Standard AC E-75 Overview Standard AC Three-Phase Reversible Electromagnetic Brake Clutch & Brake Low-Speed Synchronous IP67 Watertight, Dust-Resistant Brake Pack AC Speed Control AC input DSC E-75 E-76
More informationAccessories. Standard AC Motors A-287. Standard AC Motors Introduction. Accessories
Standard AC Accessories Standard AC Introduction Induction Reversible Electromagnetic Brake Clutch & Brake Synchronous Low-Speed Watertight, Synchronous Dust-Resistant Right-Angle Gearheads Page Motor/Gearhead
More informationBLF Series. RoHS-Compliant Brushless DC Motor and Driver Package. Features
Brushless DC Motors RoHS-Compliant Brushless DC Motor and Driver Package BLF Series The BLF Series brushless DC motor achieved a maximum motor speed of 4 r/min. With the digital operator, digital setting
More informationInstallation. Standard AC Motors. Standard AC Motors C-277. Installation. Introduction. Induction Motors. Reversible Motors
Standard AC Standard AC Installation Brake Brake s Installation C-277 Installation Installation Handling the Handling Always carry the motor by placing it in the original package. If the motor must be
More information30 W/60 W/120 W. RoHS-Compliant Brushless DC Motor and Driver Package with Digital Operator BLF Series
RoHS-Compliant Brushless DC Motor and Driver Package with Digital Operator BLF Series 3 W/6 W/12 W The BLF Series Brushless DC Motor and driver package adopts a brand new design for its motor, gearhead
More informationC B Motors CB I W U. Clutch and Brake Motors. Features. Product Number Code. Construction A ORIENTAL MOTOR GENERAL CATALOG
lutch and Brake s B s This compact precision motor is equipped with an internal clutch and brake for use with a gearhead. The combination makes it the ideal motor for uses involving frequent START/STOP
More informationAXH Series. Brushless Motor and Driver Package. Features
Brushless Motor and AC Speed Control Standard AC Brake FBL2 AXU AXH HBL MSS W ES US Gearheads Linear Heads Water Tight FPW Accessories Brushless Motor and Package AXH Series More compact, Higher power.
More informationBrushless DC Motor Systems FBL2 Series
FBL2 Series The FBL2 Series consists of a high performance, compact, brushless DC motor and driver. This product is available with 75 W (1/1 HP) and 12 W (1/6 HP) output power. For easy installation, the
More informationBrushless DC Motor and Driver Package
RoHS-Compliant Brushless DC Motor and Driver Package BLH Series 24 VDC Input 15W (1/50HP) / 30W (1/25HP) / 50W (1/15HP) / 100W (1/8HP) The Brushless DC Motor and Driver Package BLH Series is a 24 VDC Power
More informationBrushless Motors BLE Series. Features
Brushless Motors BLE Series The BLE Series sets a new standard for brushless motors by contributing to energy savings in a compact yet powerful package. By using the control module (sold separately), further
More informationSMK Series. Additional Information. Stepping Motors. Technical Reference F-1 General Information G-1. Motor & Driver Packages.
Stepping s Low-Speed Synchronous s SMK Series dditional Information Technical Reference F-1 General Information G-1 Introduction S S PLUS SC RK CFK2 CSK PMC UMK CSK PKPV PK UI212G EMP41 SC EMP42 SCE SG8J
More informationSt epping Mot or s C-i ORIENTAL MOTOR GENERAL CATALOG 2009/2010
C-i ORIENTAL MOTOR GENERAL CATALOG 29/21 C Introduction C-2 Stepping Motor and Driver Packages AC Input Stepping Motor and Driver Packages DC Input Stepping Motors AC Input AS Series C-14 DC Input ASC
More informationAccessories. Speed Control Motors B-193. Speed Control Motors. Cables Indicator Others
Control Motors Control Motors Accessories Introduction BX BE AXU FB DC Input BH MSS W US Brushless Motors AC Control Motors ES01/ ES0 Page Overview of Accessories B-194 Cables B-195 Motor Indicator B-198
More informationThe Available Solution
The Available Solution ISO 02 NATIONAL ACCREDITATION QUALITY ASSURED OF CERTIFICATION FIRM BODIES POWER TRANSMISSION & CONTROLS GROUP ISO 14001 CERTIFICATION We have achieved ISO 14001 for environmental
More informationRoHS Directive-Compliant Motorized Linear Slides EZS Series for Clean Room Use. Features
Motorized Actuators RoHS Directive-Compliant Series for Clean Room Use The Series for Clean Room Use is a product designed with the same level of function and performance as the Series but is ideal for
More informationConnection and Operation
Connection and Operation Names and Functions of Driver 15W (1/5HP) / 3W (1/25HP) / 5W (1/15HP) 1W (1/8HP) zspeed Potentiometers Display Potentiometer Name Function VR1 VR2 Internal Potentiometer Acceleration/
More informationProgrammable Controller
RoHS-Compliant and Pinion Systems S Series dopting a rack and pinion mechanism and a closed loop stepping motor, the S Series achieves high positioning accuracy and high thrust force. It is a high-speed,
More informationBrushless DC Motor Systems AXU Series
RUN LOW HIGH POWER ALARM STAND-BY Brushless DC Systems AXU Series The AXU Series combines a compact, brushless DC motor with a speed control unit. These systems provide space savings, easy wiring and simple
More informationMotion Solutions AC Induction Permanent Magnet DC Brushless DC
Motion Solutions AC Induction Permanent Magnet DC Brushless DC Gearmotors Motors Controls bodine-electric.com Your Partner for Engineered Solutions and Optimized Delivery Programs 3D Modeling and Prototyping
More informationRoHS-Compliant 2-Phase Stepping Motors PK Series
RoHS-Compliant 2-Phase Stepping Motors PK Series RoHS-Compliant 2-Phase Stepping Motor PK Series Stepping motors enable accurate positioning operation with ease. They are used in various types of equipment
More informationBrushless DC Motor Systems AXU Series
RUN LOW ORIENTAL MOTOR HIGH POWER ALARM STAND-BY Brushless DC Systems AXU Series The AXU Series combines a compact, brushless DC motor with a speed control unit. These systems provide space savings, easy
More informationStandard AC Motors E-53
Standard AC E-53 Overview Standard AC Reversible Reversible Three-Phase Reversible Electromagnetic Brake Clutch & Brake Low-Speed Synchronous Torque IP67 Watertight, Dust-Resistant AC Speed Control AC
More informationBrushless Motors. Brushless Motors/AC Speed Control Motors. Brushless Motors/AC Speed Control Motors D-11. AC Input BX Series. AC Input BLF Series
Brushless Motors/C Speed Control Motors Introduction Brushless Motors/C Speed Control Motors Brushless Motors C Input BX Series C Input BLF Series C Input BLE Series C Input BLU Series DC Input BLH Series
More informationORIENTAL MOTOR GENERAL CATALOG. Accessories A-259
ORIENTAL MOTOR GENERAL CATALOG Standard AC Motors Induction Motors Reversible Motors Synchronous Motors Accessories Flexible Couplings A-26 Motor Mounting Brackets A-266 External Speed Indicators A-269
More informationHG + HG + New hollow shaft precision. The successor to our versatile hypoid gearhead with hollow shaft on one/both sides Version HG +
ew hollow shaft precision The successor to our versatile hypoid gearhead with hollow shaft on one/both sides Version Specifications + ++ +++ Positioning accuracy Rigidity Smooth-running Speed capacity
More informationHigh Torque Gearheads
rushless DC Motor High Torque Gearheads 6W, 12W, 2W, 3W Gear Ratio 5-12 Right-ngle Hollow Shaft Hypoid JH Gearhead Foot Mount Type J Gearhead Parallel Shaft JV Gearhead Parallel Shaft Gearhead Right-ngle
More informationNDR Series Rotor Pack
efore using the product, please check the DR Series Rotor ack Features Low noise chieves a noise level of no greater than 0 d () and there is no need to worry about hydraulic noise even at factories in
More information5-Phase Stepping Motor and Driver Package CRKSeries 24 VDC Photocoupler Input 1-Pulse/2-Pulse Input Specifications
RoHS-Compliant -Phase Stepping Motor and Driver Package CRKSeries VDC Photocoupler Input -Pulse/-Pulse Input Specifications High-Resolution Type Standard Type PN Geared Type High-Torque Type TH Geared
More informationBLV Series Standard Type/Electromagnetic Brake Type
Brushless Motor and Driver Package DC Power Supply Input, High Power BLV Series Standard Type/Electromagnetic Brake Type Introducing the new high power, DC input BLV Series brushless motor and driver with
More informationRoHS-Compliant Closed Loop Stepping Motor and Driver Package. AS Series ASC Series
RoHS-Compliant Closed Loop Stepping Motor and Driver Package AS Series ASC Series RoHS-Compliant Closed Loop Stepping Motor and Driver Package AS Series The is an innovative stepping motor unit that adopts
More informationDC Input. Brushless Motors/AC Speed Control Motors D-89. Brushless Motors/AC Speed Control Motors D-89. BLH Series. Overview, Product Series
Brushless /C Speed Control D-89 Overview, Series Brushless /C Speed Control Brushless Brushless BMU BLE2 BX BLH Series BLH C Speed Control DSC US2 ccessories Installation D-89 D-9 Brushless BLH Series
More informationHG + New hollow shaft precision
ew hollow shaft precision The successor to our versatile hypoid gearhead with hollow shaft on one/both sides. With the, low torsional backlash and high torsional rigidity assure maximum positioning accuracy
More informationDC Input. Brushless Motors/AC Speed Control Motors D-117. Brushless Motors/AC Speed Control Motors D-117. BLH Series. Overview, Product Series
Brushless /C Speed Control D-117 Overview, Series Brushless /C Speed Control Brushless Brushless BMU BLE BLF BX BLH Series BLH C Speed Control DSC BHF ccessories Installation D-117 D-118 Brushless BLH
More informationInternet For latest information, PDF catalogs and operation manuals
DJ Series ew DIPK omenclature Features DJ - - 0-4 6 7 Low noise The tank contains the pump and motor inside and functions itself as noise insulation panels to trap noise internally. Low oil temperature
More informationLS Linear Heads. Standard AC Motors. Standard AC Motors C-247. Introduction. Induction Motors. Reversible Motors. Electromagnetic Brake Motors
Standard AC Introduction Induction Standard AC LS Linear Heads Reversible Electromagnetic Brake V Series Clutch & Synchronous Brake Low-Speed Synchronous Watertight, Dust-Resistant Torque Right-Angle Gearheads
More informationBrushless DC Motor and Driver Package BLF Series
HM-5073-4 Brushless DC Motor and Driver Package BLF Series OPERATING MANUAL (Motor) (Driver) Thank you for purchasing an Oriental Motor product. This Operating Manual describes product handling procedures
More informationHigh Power. EZA Series. High Thrust Force. Large Transportable Mass. Motorized Cylinders. Features
Motorized Cylinders For details on this product please refer to our website, contact technical support or your nearest Oriental Motor sales office. These motorized cylinders have a built-in LM guide. Greater
More informationCompact Linear Actuators
Motorized ctuators Compact Linear ctuators DRL Series Motorized Linear Slides Motorized Cylinders Compact Linear ctuators Hollow Rotary ctuators Linear and Rotary ctuators Introduction EZS EZC EZHC EZHP
More informationProvided Capacitor E: Single-Phase 220V/230V. Motor
Standard AC Motor Type MSSW Series This is unit products which is combined a compact speed control pack and W-9W speed control motor. The gearhead shown in the photograph is sold separately. Product Number
More informationVERTICAL TYPE LIMIT SWITCHES (INCLUDES LAMP TYPE)
VERTICAL TYPE LIMIT SWITCHES (INCLUDES LAMP TYPE) Limit Switches General use vertical limit switch. Type with a lamp which makes maintenance convenient; either a neon AC powered lamp or an LED DC powered
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationBrushless DC motor and driver package BX Series
HM-5069-4 Brushless DC motor and driver package BX Series OPERATING MANUAL Thank you for purchasing an Oriental Motor product. This Operating Manual describes product handling procedures and safety precautions.
More informationNDJ Series New DAIPACK
DJ Series ew DIPK omenclature DJ - - 0-4 6 7 Model o. DJ: ew DIPK Pump capacity 8: V 8 used ( 8 cm /rev) : V used (4.8 cm /rev) Pressure adjustment range 9: 0.8 to. MPa {8 to kgf/cm } : 0.8 to 7 MPa {8
More information5-Phase Stepping Motor and Driver Package RK Series
RoHS-Compliant -Phase Stepping Motor and Driver Package RK Series Standard Type PN Geared Type TH Geared Type Harmonic Geared Type RoHS-Compliant -Phase Stepping Motor and Driver Package RK Series The
More informationElectronic circuit breaker EBU10-T
Description The electronic circuit protector type EBU10-T (Electronic Breaker Unit) provides selective overcurrent protection in AC 230 V UPS systems. It consists of an MCB approved for short circuit interruptions
More informationTQ-TQK-TR-MP LC-LCK-SL-KR Series. Precision Planetary Gearboxes
TQ-TQK-TR-MP LC-LCK--KR Series Precision Planetary Gearboxes OUR PRODUCTS AT A GLANCE PRODUCT INLINE RIGHT ANGLE PRODUCT LINE-UP CONFIGURATIONS HIGH PERFORMANCE NEW TQ NEW TQK Yes Yes Highest Precision
More informationMotorized Linear Actuators. EZS Series SPV Series EZC Series EZA Series PWA Series
Motorized Linear Actuators EZS Series SPV Series EZC Series EZA Series PWA Series Advancing Positioning Applications Oriental Motor s Motorized Actuators Oriental Motor offers a broad lineup of motorized
More informationThe Complete System Solution! Highest Grade Electronic Components RoHS Compliant.
Advantages of the 72 Alternating Relay The Complete System Solution! Highest Grade Electronic Components RoHS Compliant. The Model 72 series Alternating Relay is designed for duplex pumping systems where
More informationLinear & Rotary Actuators F-41
& F-41 & DRS Series Equipped Page Series Equipped F-4 F-41 F-4 Series Equipped $ $ For detailed information about regulations and standards, please see the Oriental Motor website. The Series is a line
More informationPowers TM Controls EA 338 Electronic Actuator
Powers TM Controls Technical Instructions Document No. 155-136P25 EA 338-1 Description Features 24 Vac power supply. The s are used with floor mount linkage kits to operate dampers in HVAC installations.
More informationA-01 Product Coding System A-04 Products Lineup A-08 General Information A-12 Terminology A-15 Caution for Using
DC Motors Contents B Information -01 Product Coding System -04 Products Lineup -08 General Information -12 Terminology -15 Caution for Using C Motors B-01 Technical Data of C Motor B-06 Induction Motor
More information56 mm sq. (2.20 inch sq.)
56 mm sq. (2.2 inch sq.) 1.8 /step RoHS Bipolar winding, Lead wire type Unipolar winding, Lead wire type p. 68 Customizing Hollow Shaft modification Decelerator Encoder Varies depending on the model number
More informationHigh-Efficiency AR Series. RK Series /0.72 /Geared. CRK Series. RBK Series. CMK Series. 2-Phase Stepping Motors A-278.
A Stepping Motors Stepping Motors Introduction A-2 Introduction AC Power Supply Input Stepping Motor and Driver Packages A-17 DC Power Supply Input Stepping Motor and Driver Packages Stepping Motors (Motor
More informationORIENTAL MOTOR GENERAL CATALOGUE
ORIETAL MOTOR GEERAL CATALOGUE Standard AC ( are sold separately.) Linear Heads Features A-190 General Specifications A-191 Glossary A-194 Product Specifications A-196 Brake FBL2 AXU AXH HBL MSS W ES US
More informationHigh Torque Gearheads
Brushless DC Motor High Torque Gearheads 12W, 2W, Gear Ratio 5-12 Right-Angle Hollow Shaft Hypoid JH Gearhead Foot Mount Type JB Gearhead Parallel Shaft JV Gearhead Parallel Shaft Gearhead Foot Mount Type
More informationNew Product Release. Servo Motor <HC-LP, HC-RP, HC-UP Series> H C - L P 5 2 B. General-Purpose AC Servo MELSERVO-J3 SV0601-1E. Model configurations
General-Purpose C Servo MELSERO-J3 New Product Release S61-1E Servo Motor MELSERO-J3 Series motor lineup has been expanded to include the following new motors: HC-LP series
More informationQL (AZ4) Limit Switches
SUMINITURE SIZE LIMIT SWITCHES QL (Z4) Limit Switches High precision micro limit switches with excellent environmental protection. Quickly upgraded to limit switches with lamps by mounting an LED lamp
More informationInner block. Grease nipple. Fig.1 Structure of LM Guide Actuator Model KR
LM Guide ctuator Model LM Guide + all Screw = Integral-structure ctuator Stopper Housing all screw Inner block Grease nipple Outer rail earing (supported side) Housing Stopper Double-row ball circuit earing
More informationHyponic. Quick-Start Guide. Manual
Hyponic Quick-Start Guide 1 Manual 12.002.61.008 Hyponic Safety Consult the factory if Hyponic products are driven by DC motors, variable frequency AC drives, or speeds other than standard catalog input
More informationDC MOTOR INDEX DC MOTOR FEATURES W ( 60mm) W ( 80mm) W ( 80mm) W ( 90mm) W ( 90mm) 227.
DC MOTOR INDEX DC MOTOR FEATURES 216 15W ( 60mm) 219 25W ( 80mm) 221 40W ( 80mm) 223 60W ( 90mm) 225 90W ( 90mm) 227 120W ( 90mm) 229 DC Characteristic of D.C. magnet motor, Torque and Speed (r/min) When
More informationEZS. Motorized Linear Slides. Series. RoHS-Compliant
RoHS-Compliant Motorized Linear Slides EZS Series AUDIN -, avenue de la malle - 5137 Saint Brice Courcelles - Tel : 3...1 - Fax : 3... - Web : http: www.audin.fr - Email : info@audin.fr RoHS-Compliant
More information