Solutions for photovoltaic systems

Transcription

1 Solutions for photovoltaic systems THINK CONNECTED.

2 ProtectPlus. The OBO system kit for comprehensive protection of photovoltaic systems It is our aim to provide a complete system for almost any electrical requirements in a photovoltaic system. This brochure contains our solutions for a permanently safe and quick installation. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 2 OBO LPA

3 Contents How do I install external lightning protection in combination with a photovoltaic system? How do I maintain separation distances to the lightning protection system? What options do I have for strain relief of vertical cable routing? How do I best protect the inverter? How do I route cables in the area of emergency and escape routes? In the Basic Principles section, we can provide the answer to a range of questions with practical mounting solutions for sloping and flat roofs and field solutions. External lightning protection Surge protection systems Equipotential systems bonding Earthing systems Cable routing 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Construction fire protection Directories LPA OBO 3

4 As the installation engineer of a P system, you carry the responsibility. Not a problem with ProtectPlus. The overall responsibility for electrical safety is in the hands of the commissioner. Photovoltaics working party The erection of a photovoltaic system often requires major intervention in the electrical infrastructure of a building. This is reflected in the wide range of standards and regulations to be complied with. The person erecting the system is liable for correct fulfilment for 30 years, and the requirements of the insurance company come on top of that. Please observe the appropriate local and statutory requirements. Responsibility of the erection engineer Depending on the system type, the following standards must be complied with: Lightning protection DE to -4 DE suppl. sheet 5 IEC to -4 Surge protection DE IEC IEC EN 539- Low-voltage electrical installations DE IEC DE IEC DE IEC Requirements for P power supply systems DE IEC DE IEC EN (TS) Constructional fire protection DIN LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 4 OBO LPA

5 Responsibility of the operator Through the feed-in of the gained energy, almost every P system is subject to the requirements for commercial use. For the system operator, this creates the obligation to give the system the proper maintenance, checking and repairs. These regular recurring checks of the electrical system components may only be carried out by an electrical technician. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 The specialist company installing a P system is required by law to hand it over in perfect condition. LPA OBO 5

6 Coordinated protection. The ProtectPlus system kit. A well-thought-out system for the whole electrical infrastructure of a photovoltaic system that's ProtectPlus. Different components provide comprehensive protection, which allows both the erection engineer and the system operator to sleep in peace. External lightning protection systems Lightning currents are intercepted and run safely to the earth with the following systems: Interception rods and interception masts Insulated lightning protection Insulated iscon cable Flat and round conductors Cable brackets Connection clamps and connection terminals Earthing systems Our products for perfect earthing: Flat and round conductors Connectors Connection terminals Earth entries Deep, ring and foundation earthers Corrosion protection 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 6 OBO LPA

7 Equipotential bonding systems Equipotential bonding systems are the link between external lightning protection, surge protection and earthing. They are available in the following variants: For indoor use For outdoor use For industrial use Surge protection systems A product range for any application: Lightning arrestor/combination arrestor Surge protection for energy and data technology Complete system solutions, terminated and pre-mounted in the housing Combination and surge arrestors for photovoltaics, DC side Cable support systems Quick-mounting, safe cable routing with: Cable trays Mesh cable trays Cable ladders ertical ladders Suspended supports Wall and support brackets 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Cable routing systems Tidy cable routing within the building can be achieved using Wall and ceiling trunking Cable and pipe fastening systems made of plastic and metal Screw-in and knock-in systems Rail systems Fire protection systems Our fire protection systems consist of the following components: Insulation Weatherproof fire protection bandages Systems for emergency and escape routes LPA OBO 7

8 External lightning protection for roof systems Sloping roof with P and lightning protection system Complete product range, decades of experience The inclusion of a photovoltaic system into the existing lightning protection concept of a building is often neglected during refitting work. This significantly increases the risk of considerable damage through a direct lightning strike. For public buildings, for example, the LBO (state construction regulations) require a lightning protection system to protect people and provide protection against fires. Our extensive product range and our experience mean that we can offer the right solutions for almost any type of sloping roof. Amongst other things, it comprises: Interception rods Rod holders Ridge conductor holder Roof cable holder for ridge tiles Roof cable holder for various roofing types Cable brackets Round and flat conductors Four materials Our products are available in four different materials: Steel, hot-dip galvanised Copper Aluminium Stainless steel Conductor, connected with gutter clamp 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 8 OBO LPA

9 Lightning protection equipotential bonding Flat roof with P system and insulated iscon cable 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Lightning protection equipotential bonding system arious points should be observed when arresting the lightning current. Metallic components without a conductive connection into the building must be connected directly to the lightning protection. Active DC/AC cables and data systems are included in the equipotential bonding using suitable lightning current and surge arrestors at the entry to the building. All metallic parts of a building and electrically powered equipment and their supply cable must be integrated into the lightning protection system. Separation distance Air-conditioning systems, electrical sensors and photovoltaic systems are examples for roof structures in which the separation distance must be maintained. This distance is required to avoid dangerous sparking and lightning components between both the external lightning protection system and the metallic building parts and electrical devices. In particular, when P systems are refitted, this is often not possible due to the construction situation. Here, the insulated iscon cable can help. The ideal solution with which a separation distance of 0.75 m through the air and.5 m for solid matter can be maintained. Lightning protection equipotential bonding on the P mounting system LPA OBO 9

10 Cable support systems Cable routing with cable support system and plastic wall trunking and surge protection Solid connections Tidy cable routing is at the heart of a P system which can function for decades. Metallic cable trays and mesh cable trays protect the system against mechanical loads, both in indoor and outdoor areas. Strain relief for vertical cable routing When cables are routed vertically, appropriate strain relief must be ensured. Our product range comprises vertical ladder systems with various profiles for direct wall mounting, for freestanding mounting or mounting on existing steel structures. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 0 OBO LPA

11 Cable support systems Tough conditions Simple installation Cables outside the building are particularly exposed to the weather. Rain, snow, heat, U radiation and wind continually attack the P system. OBO cable systems combine the best possible protection with rapid mounting. Our product range comprises closed cable tray, wide span tray and mesh cable tray systems. Using clever details, such as the mounting adapter, you can fix mesh cable trays to the OBO FangFix stones in a single action. The covers are secured to the flat roof by tightening straps. Screening of cables The passive screening of cables with OBO cable support systems with covers permits attenuation of up to 60 db. This means that electronic system components are protected against electromagnetic interference, and economic losses through failure or damage are prevented. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Attach the TrayFix mounting adapter and fixing plate, push it home and you're done. LPA OBO

12 Cable routing in the area of fire protection walls Protected bridging of the fire wall using a fire protection bandage Solutions for outdoor fire protection walls When cables are run over fire protection walls, serious errors are often made. Combustible cables may not bridge these areas without protection. The combination of our mesh cable tray and the weatherproof fire protection bandage ensures you are on the safe side if there is a fire, the bandage foams up, preventing the fire from spreading. Insulation in fire protection walls in buildings If an installation is run through a fire protection wall, then it should be closed with types of insulation in such a way as to prevent the spread of fire and smoke. OBO can offer different solutions to this task: Pyrosit fire protection foam Fire protection cushion Fire protection mortar The insulation is matched to different standard wall types Go to the BSS app here. Using the app, you can determine suitable products for your current requirements, quickly and simply. In the area of a fire protection wall, the cover is replaced by a fire protection bandage Insulation in a fire protection wall 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 2 OBO LPA

13 Fire protection duct system for P cables 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Protection through organisational measures At the transition point of the electrical system, e.g. house connection box, main distribution, DE requires the attachment of the standardised information sign / fire brigade sign. The fire brigade can recognise the P system through the identification and fireproof routing of the energised DC cables. Fire protection for P cables Unswitchable DC cables of the P system must be routed safely in the building to prevent damage to the insulation. Even in case of fire, the fire brigade must be able to rescue people safely. According to DE-AR , protection of the DC cables is possible using suitable insulation or a fire protection duct according to DIN 402. With Pyroline Sun P, DC cables already installed in the emergency and escape route can be protected later in accordance with the standard. LPA OBO 3

14 Cable routing systems protect cables and the reliability of the system. Perfect protection in buildings Even in buildings, cables are subject to mechanical loads, which, in the worst-case scenario, can lead to the failure of the system. Combination of the OBO products creates reliable protection of cabling, from the roof through to the inverter. Wall and ceiling trunking of different dimensions are complemented with appropriate fittings. Plastic and metal cable and pipe fastening systems and clips protect small cable volumes and individual cables. In this way, you can protect the system against failure through torn or worn-through cables for decades to come. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 4 OBO LPA

15 Metal pipe systems: the first choice for protection under tough conditions Protection against sunlight and high temperatures Strong U radiation can cause damage and destruction to plastics. Electrical devices generate heat through loss and, in conjunction with high ambient temperature and direct sunlight, the internal temperature can increase. Based on the local loads, the installation engineer may need to perform additional measures. For example, the installation must be protected by an additional roof against direct sunlight and loads from rain and snow. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 According to DIN DE (IEC ) Erection of heavy current systems for rated voltages of up to,000 "Measures must be taken to remove water, if water or water condensation can occur within cable systems". Pre-marked openings to minimise condensation through temperature variations LPA OBO 5

16 Protection in every direction: surge protection systems All-round protection There are always two sides to the surge protection of photovoltaic systems. On the direct current side (DC), there can be surge voltages from lightning strikes, whilst, on the alternating current side (AC), voltage peaks from the power and data network may damage the inverter. OBO surge protection reliably protects every side. Existing data cables can be safely included in the equipotential bonding using protection devices. The complete range OBO's surge protection programme is set up in modules and offers solutions for almost all application cases. It is comprised of: Lightning arrestors Combination arrestors Surge arrestors Particularly useful are the readymade photovoltaic systems for the most common requirements, as they demand minimal installation only. Do you require special solutions, such as insulators or fuses? Please get in touch with us. OBO Customer Service +49 (0) Insulated lightning protection and combination arrestor on inverter Surge protection on the AC P distributor 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 6 OBO LPA

17 Support in every phase of the project 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Time is money Our customers in the field systems sector place great emphasis on competent advice in all phases of the project. The comprehensive, networked OBO product range ensures flawless, quick project processing. OBO Customer Service +49 (0) export@obo.de LPA OBO 7

18 Planning aid, protective angle method Protective angle method for roof structures You have protected the flat-roofed building correctly according to the standard DE (IEC 62305). You must now protect all roof structures with interception rods. This involves observing the separating distance (s). If the roof structure has a conductive continuation into the building (e.g. with a stainless steel pipe with a connection to the ventilation or air-conditioning system), then the separating distance (s) must always be maintained. The interception rod must be erected at a certain distance from the building to be protected. This distance safely prevents arcing of the lightning current and dangerous spark creation. α = lightning protection angle, s = separating distance Roof structures with an individual air-termination rod The protective angle for lightning rods varies according to lightning protection class. You can find the protective angle α in the table for the most common interception rods of up to 2 m in length. = lightning protection angle α, 2 = ridge height h in m, 3 = lightning protection classes I/II/III/I Protective angle according to lightning protection class according to DE (IEC 62305) Lightning protection class Protection angle α for interception rods to 2 m length I 70 II 72 III 76 I 79 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 8 OBO LPA

19 Planning aid, rolling sphere method p = penetration depth, R = radius of the lightning sphere, d = distance of the interception system Formula for calculating the penetration depth (p) Roof structures with multiple interception rods If you use several interception rods to protect an object, you must take into consideration the penetration depth between them. For a precise calculation, use the following formula: 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Penetration depth according to the lightning protection class according to DE Distance of interception system (d) in m Penetration depth Lightning protection class I lightning protection sphere: R = 20 m Penetration depth Lightning protection class II lightning protection sphere: R = 30 m Penetration depth Lightning protection class III lightning protection sphere: R = 45 m Penetration depth Lightning protection class I lightning protection sphere: R = 60 m LPA OBO 9

20 Lightning protection equipotential bonding system and separation distance Separating distance (s) between the lightning protection system and cable support system Important measures The following points must be taken into account to guarantee comprehensive protection of the P system: Local earthing (PAS) must be connected to the main equipotential bonding (HPAS). Equipotential bonding cables must be routed close to and parallel with the DC cables. Data cables must be included in the protection concept. You can find an overview of the protective measures in the table "Overview of protective measures". Separation distance According to DIN EN 62305, the lightning protection system must be erected at a separation distance (s) from the parts of the P system. Usually, a separation distance (s) (= safety distance) of 0.5 m to m is sufficient. Separation distance (s) between the lightning protection system and the photovoltaic system 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

21 Insulated lightning protection with GfK holder on cooling unit Shading The position of the interception masts or interception rods should be chosen so that there is no shading of the P modules. A core shadow can cause performance reductions of the whole string. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Insulated interceptor masts with internal iscon wiring An interception rod must be at least 08 x diameter from the P module (DIN EN Suppl. sheet 5). Distance from the interception systems, to avoid a core shadow Diameter of the interception system (m) Distance between the interception system and the P module (m) LPA OBO 2

22 You do the planning. OBO can support you in the correct implementation of the system. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

23 Four steps to comprehensive protection Step : Check the separation distance If the required separation distance cannot be complied with, then the metallic parts must be interconnected to be able to carry lightning current. Step 2: Check the protection measures Example: measures for lightning protection equipotential bonding are used on the DC and AC side, e.g. lightning arrestor (type ). Step 3: Include data cables Data cables must be included in the protection concept. Step 4: Carrying out the equipotential bonding Local equipotential bonding must be provided on the inverter. Overview of protection measures Initial situation Measure Separation distance according to DIN EN maintained Equipotential bonding Surge protection Sample product picture External lightning protection system (according to DIN EN ) Adapt the lightning protection system according to DIN EN Yes min. 6 mm² DC: 2 AC: No min. 6 mm² DC: AC: 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 No outside lightning protection system Earthing cable connection Requirements' testing: LBO, ds 200, risk analysis, - min. 6 mm² DC: 2 AC: 2 LPA OBO 23

24 Selection aid Photovoltaic system solutions Energy technology, type 2, protection of the DC side Initial situation Max. DC voltage Max. number of MPP per inverter Max. number of strings per MPP terminal Connection (DC side) ersion Item no. Product figure No external lightning protection system Earthing cable connection The following are required: Surge voltage protection, type 2 Lightning protection equipotential bonding 6.5 mm² 600 In/Out MC 4 connector 000 In/Out MC 4 connector 2 Terminals Circuit breaker G-C DCPH-Y Page: 55 G-C DCPH-Y Page: 55 G-C DC-TS Page: 53 4 Terminals 4 fuse holders, unequipped G-C P000KS Page: 52 6 Terminals 6 fuses, 8 A G-C DCPH000-6S Page: 52 8 Terminals G-C DCPH000-4K Page: 54 0 Terminals G-C DCPH-MS In/Out MC 4 connector G-C DCPH Page: 2 4 Terminals G-CP000K You can find the selection aid for AC combination arrestors and surge protection in the chapter Surge Protection in Energy Technology. 2 6 Terminals G-CP 000K Page: 5 3 2In/Out MC 4 connector G-C DCPH Page: 3 6 Terminals G-CP 000K Page: 5 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

25 Energy technology, type +2, protection of the DC side Initial situation Max. DC voltage Max. number of MPP per inverter Max. number of strings per MPP terminal Connection (DC side) ersion Item no. Product figure External lightning protection system according to DIN EN Terminal G-BC DCPH-MS The following are required: Lightning and surge protection +2 Lightning protection equipotential bonding 6 mm² Separating distance could not be maintained In/Out MC 4 connector 900 In/Out MC 4 connector 2 Terminals Circuit breaker G-BC DCPH-Y Page: 55 G-BC DCPH-Y Page: 55 G-BC DC-TS Page: 53 8 Terminals G-BC DCPH900-4K Page: 54 0 Terminals G-BC DCPH-MS In/Out MC 4 connector G-BC DCPH Page: 2 4 Terminals G-BCP900K Terminals G-BCP 900K Page: 5 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Data technology 3 2In/Out MC 4 connector G-BC DCPH Page: 3 6 Terminals G-BCP 900K Page: 5 Initial situation RJ 45 Terminal Item no. Product figure No external lightning protection system Earthing cable connection External lightning protection system (according to DIN EN 62305) ND-CAT6A/EA Page: 46 FRD 24 HF Page: 47 LPA OBO

26 Selection aid, energy technology AC combination arrestor and surge protection; type +2, type 2 and type 3 Installation location Installation in the main distributor box / combined distributor Basic protection / type, type 2 Initial situation Building type Description Item no. Test mark Product figure No external lightning protection system Earthing cable connection Private building TN-/TT SU Secondary counter zone 0 Compact Page: 44 TN/TT SU Secondary counter zone 0-C 3+NPE Multiple dwelling/ industry, commerce TN-/TT 2 4 SU Secondary counter zone 20-3+NPE Page: 42 DE 20-3+NPE+FS-280 with remote signalling Page: 42 DE External lightning protection system (according to DIN EN ) Buildings of lightning protection classes III and I (e.g. housing, offices and commercial buildings) TN/TT +2 4 SU Secondary counter zone -3+NPE Page: 4 Outdoor connection Buildings of lightning protection classes I to I (e.g. industry) TN-C 6 SU Pre-metered or secondary counter zone TN-S 8 SU Pre-metered or secondary counter zone -3+NPE+FS-280 with remote signalling Page: 4 MCD -B Page: 40 MCD -B Page: 40 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

27 Installation location 2 Installation in the sub-distributor Medium protection / type 2 Only required if distance 0m Installation location 2 Installation before the terminal Fine protection / type 3 Description Item no. Product figure Description Item no. Test mark Product figure TN/TT SU 0 Compact Page: 44 Plug-in FC-D DE FC-T-D DE 0 Compact-AS, with acoustic remote signalling FS-SAT-D DE TN/TT 2 4 SU 20-3+NPE Page: 42 FC-TAE-D DE FC-ISDN-D DE 20-3+NPE+FS-280 with remote signalling Page: 42 FC-RJ-D DE CNS-3-D-D TN/TT 2 4 SU 20-3+NPE Page: 42 Fixed installation ÜSM-A LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 TN/TT 2 4 SU 20-3+NPE+FS-280 with remote signalling Page: 42 C20-3+NPE Page: NPE+FS-280 with remote signalling Page: 42 Seriesinstallationin distributor ÜSM-A ÜSS 45-o- RW 0 Compact L/L2/L3/N F230- AC/DC F230-AC- FS with remote signalling Page: Page: Page: 43 LPA OBO 27

28 28 OBO LPA 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205

29 External lightning protection Round conductor, aluminium 30 FangFix Junior system 30 Stand, FangFix system 30 Interception rod holder 3 Insulated spacer 3 Cable bracket 32 OBO iscon system 34 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 LPA OBO 29

30 Interception and arrestor systems External lightning protection Round conductor, aluminium Nominal size Ø Cross Normal Normal section ring ring mm mm² ca. m ca. kg RD 8-ALU 8 20 RD 8-ALU-T 8 20 RD 0-ALU RD 8-ALU-T Al Aluminium According to DIN EN 64-2 (DE 085 Part 202) Meets the requirements of DE (IEC 62305) RD 8/ALU: Semi-hard (E-AlMgSi0.5 corresponds to DIN 4880) RD 8/ALU-T: Twistable (E-AlMgSi0.5 corresponds to DIN 4880) RD 0/ALU: Pure aluminium (E-Al corresponds to DIN 4880) AL and ALMgSi may not be routed directly on, in or under the plaster, mortar or concrete nor underground kg/00 m 3,0 3,0 2,000 3, price/00 m D FangFix Junior System F-FIX-JUNIOR Al Aluminium Length Nominal size Ø mm mm Incl. aluminium interception rod,000 mm long (Ø 0 mm) Quick mounting of the interception rod in the base using plug technology With ario quick connector 249 kg/ , Interception rod tapered 0 L0 0 L L20 0 L L30 0 L4000 Length Nominal size Ø mm mm 0 0/ /6 20 0/ /6 30 0/ /6 Al Aluminium Suitable for high wind loads Final metre tapered from Ø 6 mm to Ø 0 mm Suitable for FangFix stand system kg/00. 38,000 55,000 72,000 88,000 05,000 20, /00 pc. Stand FangFix system 6 kg Fit Nominal size Ø mm mm F-FIX-6 Rd Concrete System consists of FangFix stone with base and clamp FangFix clamp made of A; lightning current tested with 00 ka (0/3) 6 kg stone of Ø 365 mm, high level of stability Quick and easy mounting of interception rod using anchors Concrete, frost-resistant The FangFix stone can be stacked Stand FangFix system 0 kg mm mm F-FIX-0 Rd Concrete Fit Nominal size Ø kg/ ,0 System consists of FangFix stone with base and clamp FangFix clamp made of A; lightning current tested with 00 ka (0/3) 0 kg stone of Ø 289 mm, high level of stability Quick and easy mounting of interception rod using anchors Concrete, frost-resistant The FangFix stone can be stacked kg/ , /00 pc /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

31 Interception and arrestor systems SD-Fix 2A Stainless steel, grade 304 Interception rod holder sloping roof kg/00. 8, Stand system: rod holder for sloping roofs, for simple, quick and secure fastening of Ø 6 mm interception rods. External lightning protection F-FIX-32 F-Fix System consists of a bracket made of 2A stainless steel Quick and easy mounting Adjustable angle In the case of high interception rods (> m), additional fastening with insulated spaces is necessary L mm Interception rod holder ridge tiles kg/00. 62,000 78, A Stainless steel, grade 304 Rod holder for ridge tiles, for simple, quick and safe fastening of Ø 6 mm interception rods System consisting of holder made of 2A stainless steel and aluminium interception rod Quick and easy mounting thanks to pre-mounted air-termination rod Air-termination rod length: Air-termination rod length:,000 mm Width adjustable between mm Spacing of the ridge holders: 0 mm ( ) Spacing of the ridge holders: 300 mm ( ) Application: To protect roof structures such as photovoltaic and T/SAT systems. Insulated spacer Length Fit ISO-A-0 ISO-A-800 ISO-A-030 ISO-A- 8 mm mm 0 Rd Rd Rd 6 Rd kg/00. 36,000 55,000 68,000 3,800 Al Aluminium PA Polyamide Mounting foot with 0 connection holes Ø 6.5 mm and 4 connection holes Ø 8.5 mm... 8 with holder suitable for round conductor RD 8 Application for shelters e.g. golf, barbecue or mountain huts Insulated spacer pipe mounting 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 ISA000R GFK Fibre-glass-reinforced plastic ariable spacer for cables and interception rods to maintain the separation distance. Infinitely adjustable distance range (L = 5,000 mm) Made of fibre glass-reinforced plastic (km = 0.7) For pipe mounting (including 2 m tightening strap and tension jack) ISA000W GFK Fibre-glass-reinforced plastic kg/00. 30, Insulated spacer wall mounting ariable spacer for cables and interception rods to maintain the separation distance. Infinitely adjustable distance range (L = 5,000 mm) Made of fibre glass-reinforced plastic (km = 0.7) For wall mounting with mm fastening holes and mm fastening holes kg/00. 30, LPA OBO 3

32 Interception and arrestor systems External lightning protection Cable bracket Fit Installation height mm mm M8 Rd PA Polyamide With female thread M8 or through hole Ø 7 mm Weather and temperature-resistant from -35 C to +90 C 20 kg/00., /00 pc. Cable bracket A M6 Fit Installation height mm mm Rd kg/00. 2, A Stainless steel, grade 304 /00 pc. With female thread M6 or through hole Ø 5 mm From stainless steel (2A) ario quick connector Alu Fit A mm mm ALU Rd Al Aluminium For T, cross and parallel connectors Quick installation using hexagonal bolt M0 x 30, high-grade stainless steel Conforms to the requirements according to DIN DE (IEC 62305) kg/ , /00 pc. Roof cable holder Fit 65 MBG-0 65 MBG-8 mm Rd 0 Rd 8 PA/PE Polyamide/Polyethylene DIN Form B Closed form with base With double conductor holder Filling weight kg (frost-resistant concrete) Sleeve from polyethylene, black, bottom polypropylene, black 2 2 kg/00. 06,000 06, /00 pc. Roof cable holder Fit Colour 65 MBG-8 GR 65 MBG-0 GR mm Rd 8 Grey Rd 0 Grey 2 2 PA/PE Polyamide/Polyethylene Closed form with base With double cable holder Filling weight kg (frost resistant concrete) Case made from polyethylene, light grey, U-stabilised and weatherproof Base made from polyamide PA 6, light grey, U-stabilised and weatherproof Base suitable for nearly all roofing membrane systems (Bitumen, PC) Roof cable holder recyclable Fit mm 65 R-8-0 Rd 8-0 PE Polyethylene 65/R-8-0: Roof conductor holder for flat roofs For round conductor Rd 8 to 0 With plastic mount, polyethylene, black Stone from frost-resistant concrete kg Stone separable into plastic and concrete (recyclable) kg/00. 06,000 06, /00 pc. kg/ , /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

33 Interception and arrestor systems D L H Ø mm mm mm 0 3-ES Insulated lightning protection 3-corner fastening for an insulated interception unit at the separating distance s. kg/ , Mounting on walls and roof structures with two fastening plates Acceptance of interception rods and round cables with 8, 6 and 20 mm diameter External lightning protection Construction clamp FT Fit Clamping range mm mm Rd kg/00. 30, St Steel FT Hot-dip galvanised /00 pc. Round conductors can be installed vertical or transverse to structure For affixing to structures with a flange thickness of up to 20 mm Affixing to structures with a hexagonal bolt M0 Conforms to the requirements according to DIN DE (IEC 62305) Connection and end piece with connector 35 ø Material symbol Fit mm 09 St Rd kg/00. 4, St Steel FT Hot-dip galvanised /00 pc. With 2 attaching holes Ø mm Installed with connector (single-piece) type 0 DIN-FT Conforms to the requirements according to DIN DE (IEC 62305) Connector Fit 0 DIN-FT mm Rd kg/00. 7, St Steel FT Hot-dip galvanised /00 pc. With fix contact clamping screw, nut and serrated washer With bore hole 0.2 mm With pre-mounted pressure piece, die-cast zinc Conforms to the requirements according to DIN DE (IEC 62305) 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ F T 63 Fit T L Clamping range mm mm mm mm 04 DIN-FT 2 Rd max DIN-FT 20 Rd Connection terminal for interception tip 0 0 kg/00. 8,730 30, TG Cast iron FT Hot-dip galvanised /00 pc. Flange thickness to 2 or 0 20 mm With pre-mounted Fix-Kontakt clamping screw 00 2 hexagonal bolts M8 x 20, screws made of hot galvanised steel Terminal block made of malleable iron, hot galvanised Mounting of the round conductors either vertical or transverse to structure Corresponds to the requirements of DIN DE LPA OBO 33

34 Interception and arrestor systems External lightning protection Connection component Fit mm 287 DCT Rd 8 Al Aluminium Conforming to DE (IEC 62305) standards Quick mounting thanks to an M0x30 screw from rustproof stainless steel 4 mounting holes Ø 5.2 mm 2 mounting holes Ø 6.9 mm kg/ , /00 pc. iscon arrestor, black Colour Cross Nominal Normal section size Ø ring mm² mm ca. m iscon 7 SW Black iscon 7 SW Black iscon 7 SW Black m 00 2 kg/00 m 69,400 69,400 69, price/00 m Surface discharge-free and high voltage-resistant insulated arrestor to maintain the separation distance according to IEC Equivalent separation spacing s 0.75 m in the air. Please refer to the mounting instructions for information on routing the OBO iscon cable. iscon arrestor, light grey Colour Cross Nominal Normal section size Ø ring mm² mm ca. m iscon 7 LGR Light grey iscon 7 LGR Light grey m 00 kg/00 m 86,800 86, price/00 m Surface discharge-free and high voltage-resistant insulated arrestor to maintain the separation distance according to IEC Equivalent separation spacing s 0.75 m in the air. Please refer to the mounting instructions for information on routing the OBO iscon cable. iscon insulation removal pliers iscon stripper 2 Clamping range D mm 23 kg/00. 33, PA/PE Polyamide/Polyethylene Pliers to remove the insulation of the OBO iscon cable. iscon connection element D Fit Ø mm mm iscon connect A Stainless steel, grade 304 Screw-on termination of the connection for the iscon cable. Including heat-shrinkable sleeve and screw lock. iscon potential connection Fit mm iscon PAE ø 7-mm 2A Stainless steel, grade 304 kg/ ,0 kg/ , Potential control to avoid surface discharges on the iscon cable. Installation takes place after the first.5 metres. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

35 H Interception and arrestor systems iscon H A iscon H 26 A D Ø mm A Stainless steel, grade 304 Cable brackets for iscon cable for mounting on roof/wall structures. iscon A cable bracket 20 kg/00. 2,8 3, External lightning protection iscon flat roof cable holder Colour Fit mm 65 MBG UH Black Rd 8 PP Polypropylene kg/00. 0,280 Universal adapter with drill hole Ø 2.5 mm E.g. for OBO Golden Sprint screw, type x L (L = depending on application) For fastening to 65/MBG Fy B iscon starquick clip F x D A 0 F x ø8 ø3.5 Colour D A B Size mm mm mm SQ-20 SW Jet black SQ- LGR Light grey kg/00. 0,848 0, PP Polypropylene PA Polyamide /00 pc. Cable brackets for iscon cables for mounting on the building structure. Can also be used in the first.5 m. Can be arranged next to each other and are made from a U and weather-resistant polyamide. iscon A roof cable holder, sloping roof iscon H280 A iscon H A Installation height D mm Ø mm kg/00. 6,00 6, A Stainless steel, grade 304 To route the iscon cable on pitched roofs. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Colour D Ø mm iscon H280 PA Black 280mm 23 iscon H PA Light grey 280mm 26 PA Polyamide To route the iscon cable on pitched roofs. iscon DH Clamping range D mm GFK Fibre-glass-reinforced plastic iscon PA roof cable holder, sloping roof kg/00. 3,9 4,060 kg/ , iscon spacer For stand-off installation of the iscon cable in the area of the connection. Incl. reducing sleeve for mounting on FangFix concrete block 0 Kg. Insulated interception rod for inner-routed iscon cable with side exit isfang IN-A 4000 isfang IN-A 6000 D A H B Length Materials combination Ø mm mm mm mm mm Alu / GFK Alu / GFK GFK Fibre-glass-reinforced plastic For installation of the OBO iscon cable in the pipe With side cable outlet, fitting tripod stand type isfang 3B-A Inclusive connection element (type iscon IN connect) Inclusive potential connection (type iscon IN PAE) kg/ , , LPA OBO 35

36 Interception and arrestor systems External lightning protection isfang interception rod stand with side exit isfang 3B-00-A isfang 3B--A B D L H mm Ø mm mm mm kg/00. 77,000 23, A Stainless steel, grade 304 Screwless installation of freestanding interception rods as well as insulated interception rods with mm diameter E.g. for internal OBO iscon cable Roof slope to max. 5 degrees Incl. Rd 8 0 crossbar for quick round conductor fastening Concrete plinths as well as threaded rods should be ordered separately isfang-3b threaded rod isfang 3B-G isfang 3B-G2 isfang 3B-G3 L mm A Stainless steel, grade 304 For fastening on, 2, 3 or 4 FangFix concrete bases with tripod stand kg/00. 48,000 60,400 76, Concrete block for FangFix system 6 kg Nominal size Ø mm F-FIX-S6 365 Concrete 6 kg stone of Ø 365 mm, high level of stability Concrete, frost-resistant Stackable kg/ , /00 pc. Base for FangFix system 6 kg for mounting the isfang tripod Nominal size Ø D mm mm F-FIX-B6 3B 373 PP Polypropylene kg/ ,800 Edge protection with through hole For mounting isfang-3b threaded rod and FangFix concrete block F-FIX-S /00 pc. Insulated interception rod for inner-routed iscon cable isfang IN 4000 isfang IN 6000 D A H B Length Materials combination Ø mm mm mm mm mm Alu / GFK Alu / GFK GFK Fibre-glass-reinforced plastic For installation of the OBO iscon cable in the pipe For mounting on the building structure Inclusive connection element (type iscon IN connect) Inclusive potential connection (type IsCon In PAE) isfang support for wall mounting, 5 mm spacing D L Ø mm mm isfang TW A Stainless steel, grade 304 kg/ , ,000 kg/ , Fastening clip to fasten the insulated support pipes on the structure to be protected or on the wall. isfang support for wall mounting, 80 mm spacing D L Ø mm mm isfang TW A Stainless steel, grade 304 kg/ , Fastening clip to fasten the insulated support pipes on the structure to be protected or on the wall. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

37 Interception and arrestor systems D L Ø mm mm isfang TR A Stainless steel, grade 304 isfang support for pipe mounting, ø 300 mm kg/ , Tightening strap clip to fasten the insulated support pipes on the structure to be protected or for construction-side pipes of ø 300mm. isfang TR00 00 isfang TR isfang TR isfang support for spaced pipe mounting, ø 300 mm D L Ø mm mm kg/00. 95,0 2,000 46, A Stainless steel, grade 304 Tightening strap clip to fasten the insulated support pipes on the structure to be protected or for construction-side pipes of ø 300mm. External lightning protection D L Ø mm mm isfang TSx 30 2A Stainless steel, grade 304 isfang support for corner pipe mounting, x mm kg/ , Fastening clip to fasten the insulated support pipes on the structure to be protected or for construction-side corner pipes of xmm. Information panel iscon HWS PS Polystyrene kg/00. 2, Label: "NOTE! Insulated lightning protection with the OBO iscon system. Only a lighting protection specialist may carry out changes" To label the lightning protection system Self-adhesive and with 4 fastening holes ø 6.5 mm 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Width Length Cleaning cloth iscon EPPA 004 mm mm Z-PP-P Cellulose-polypropylene paper Cellulose polypropylene paper with abrasive sections, folded multiple times Doused with 2.8 ml impregnation solution For cleaning the external jacket of the OBO iscon cable kg/00. 0, /00 pc. LPA OBO 37

38 38 OBO LPA 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205

39 Surge protection systems Lightning arrestors, energy technology AC 40 Combination arrestors +2, energy technology AC 4 Surge arrestors 2, energy technology AC 42 Surge voltage protection for telecommunication systems Tele Defender Tele Defender TAE 45 Surge arrestors Data technology 46 Lightning current and surge arrestors +2, photovoltaics 48 Surge arrestors 2, photovoltaics 49 Photovoltaic system solution Connection with MC4 connector Connection with terminals 54 Connection with MC4 connector with 2 / 3 MPP 55 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 LPA OBO 39

40 lightning arrestor for AC energy technology Lightning arrestor, type For lightning protection equipotential bonding to DE (IEC 62305) To protect the energy supply Suitable for use in pre-meter area according to the DEW directive Encapsulated, non-extinguishing spark gap arrestor for use in distributor housings Application: Industrial systems and buildings with external lightning protection of the highest class I to I. Combination arrestor for energy technology, AC 3-pole Surge protection systems Highest ersion continuous voltage MCD -B pole Highest ersion continuous voltage MCD -B NPE kg/00. 7,000 Combination arrestor for energy technology, AC 3-pole + NPE kg/00. 68, Lightning arrestor for AC energy technology, 400/690, -pole Highest ersion continuous voltage MCF 35-+FS pole kg/00. 98, AlG Cast aluminium Lightning arrestor for AC energy technology, 400/690, 3-pole Highest ersion continuous voltage MCF 35-P3+FS pole kg/ , AlG Cast aluminium Nominal voltage SPD to EN SPD to IEC Lightning protection zone LPZ Impulse discharge current (0/3) Total discharge current (0/3) Nominal discharge current (8/20) Arrestor surge current (8/20) [total] oltage protection level Response time Follow current interrupt rating Maximum back-up fuse Temperature range Division unit TE (7.5 mm) Protection rating Connection cross-section, rigid Connection cross-section, multi-wire Connection cross-section, flexible U N I imp I total I n I Total U p t A I fi ϑ ka ka ka ka k ns ka A C mm² mm² mm² MCD -B 3 MCD -B 3+ MCF 35-+FS-440 MCF 35-P3+FS class I class I class I class I <00 < IP20 IP20 IP20 IP LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

41 +2 lightning current and surge protection for AC energy technology Lightning current combination arrestor, type 2 For the equipotential bonding of lightning current to DE (IEC 62305) Lightning current discharge capacity of 2.5 ka (0/3) per pin and up to ka (0/3) in total Modular, plug-in arrestor with dynamic cut-off unit and visual status display Locking mechanism with vibration protection and voltage keying Halogen-free plastic (UL 94-0) The remote signalling (FS) variants have a potential-free changeover contact for remote signalling Application: Lighting current equipotential bonding for buildings of class III and I. Maximum Pole Protection continuous version voltage AC rating -+NPE N/PE IP20 Maximum Pole Protection continuous version voltage AC rating -+NPE+FS N/PE IP20 Combination arrestor, -pole + NPE 280 kg/00. 3,000 kg/00. 3, Combination arrestor, -pole + NPE with FS Surge protection systems Maximum Pole Protection continuous version voltage AC rating -3+NPE N/PE IP20 Combination arrestor, 3-pin + NPE 280 kg/00. 59, Combination arrestor, 3-pole + NPE with FS 280 Maximum Pole Protection continuous version voltage AC rating -3+NPE+FS N/PE IP20 kg/00. 60, NPE NPE+FS NPE NPE+FS LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Maximum continuous voltage AC U C SPD to EN SPD to IEC class I+II class I+II class I+II class I+II Impulse discharge current (0/3) I imp ka 2,5 2,5 2,5 2,5 Nominal discharge current (8/20) I n / L-N ka Maximum discharge current I max ka Protection level U p k,3,3,3,3 Network form All All All TN-S Mounting type Hat rail 35 mm Hat rail 35 mm Hat rail 35 mm Hat rail 35 mm Pole version +N/PE +N/PE 3+N/PE 3+N/PE Size 2 TE 2 TE 4 TE 4 TE Max. mains-side overcurrent protection A 60 A gl/gg 60 A gl/gg 60 A gl/gg 60 A gl/gg Protection rating IP20 IP20 IP20 IP20 Operating temperature range T u C Signalling on device isual isual isual isual Max. cable cross-section flexible (fine-wire) mm² Max. cable cross-section rigid (single wire/multi wire) mm² FM contacts Changeover Changeover Switching power AC 230 ; 0,5 A 230 ; 0,5 A Switching power DC 230 ; 0, A / 75 ; 0,5 A 230 ; 0, A / 75 ; 0,5 A Certification KEMA,ÖE KEMA,ÖE KEMA,ÖE KEMA,ÖE LPA OBO 4

42 2 surge protection for AC energy technology Surge arrestor, type 2 For surge voltage protection equipotential bonding to DE (IEC ) Discharge capacity to 40 ka (8/20) per pin through high-performance varistors Modular connectable arrestor with dynamic cut-off unit and visual status display Locking mechanism with vibration protection and voltage keying Halogen-free plastic (UL 94-0) The remote signalling (FS) variant have a potential-free changeover contact for remote signalling Application: Equipotential bonding in main and sub-distributions. Surge protection systems Surge arrestor 20, -pin + NPE, 280 Maximum Pole Protection continuous version voltage AC rating 20-+NPE N/PE IP20 Surge arrestor 20, -pin + NPE and FS, 280 kg/00. 24,0 95 Maximum Pole Protection continuous version voltage AC rating 20-+NPE+FS N/PE IP20 kg/00., Surge arrestor 20, 3-pin + NPE, 280 Maximum Pole Protection continuous version voltage AC rating 20-3+NPE N/PE IP20 kg/00. 46, Surge arrestor 20, 3-pin + NPE and FS, 280 Maximum Pole Protection continuous version voltage AC rating 20-3+NPE+FS N/PE IP20 kg/00. 46, NPE NPE+FS NPE NPE+FS-280 Maximum continuous voltage AC U C SPD to EN SPD to IEC class II class II class II class II Nominal discharge current (8/20) I n / L-N ka Maximum discharge current I max ka Protection level U p k,3,3,3,3 Network form All All All All Mounting type Hat rail 35 mm Hat rail 35 mm Hat rail 35 mm Hat rail 35 mm Pole version +N/PE +N/PE 3+N/PE 3+N/PE Size 2 TE 2 TE 4 TE 4 TE Max. mains-side overcurrent protection A A gl/gg A gl/gg A gl/gg A gl/gg Protection rating IP20 IP20 IP20 IP20 Operating temperature range T u C Signalling on device isual isual isual isual Max. cable cross-section flexible (fine-wire) mm² Max. cable cross-section rigid (single wire/multi wire) mm² FM contacts Changeover Changeover Switching power AC 230 ; 0,5 A 230 ; 0,5 A Switching power DC 230 ; 0, A / 75 ; 0,5 A 230 ; 0, A / 75 ; 0,5 A Certification UL UL UL UL LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

43 2+3 surge protection for AC energy technology Surge protection device, compact module type 2+3 For surge protection equipotential bonding to DE (IEC ) Arresting capacity up to 60 ka (8/20) in total Integrated 3+ solution for TN and TT network systems on 45 mm module width High-performance varistor technology Including thermic and dynamic cut-off unit and visual function display Optionally with acoustic signalling (-AS) or remote signalling (-FS) Application: industry, residential buildings as well as for device protection in alternating current systems. F230-AC-FS F230-AC/DC U max AC U max DC 5 Surge arrestor, -pole + NPE with remote signalling Highest U max U max continuous AC DC voltage kg/00. 6, Surge arrestor, -pole + NPE kg/00. 8, Surge protection systems 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 U max AC U max DC SPD to EN SPD to IEC Lightning protection zone LPZ Nominal discharge current (8/20) Rated current oltage protection level line-line oltage protection level line-earth Response time Temperature range Protection rating Division unit TE (7.5 mm) Connection cross-section, rigid Connection cross-section, multi-wire Connection cross-section, flexible U c AC U c DC I n ka I L A t A ns ϑ C mm² mm² mm² F230-AC/DC F230-AC-FS class III class III <000 <060 <400 <400 < < IP 20 IP 20 0,4-2,5 0,4-2,5 0,4-2,5 0,4-2,5 0,4-2,5 0,4-2, LPA OBO 43

44 2+3 surge protection for AC energy technology Surge protection device, compact module type 2+3 For surge protection equipotential bonding to DE (IEC ) Arresting capacity up to 60 ka (8/20) in total Integrated 3+ solution for TN and TT network systems on 45 mm module width High-performance varistor technology Including thermic and dynamic cut-off unit and visual function display Optionally with acoustic signalling (-AS) or remote signalling (-FS) Application: industry, residential buildings as well as for device protection in alternating current systems. Surge protection systems Surge protection, 3-pole + NPE Highest ersion continuous voltage 0 COMPACT NPE Surge arrestor, 3-pole + NPE with remote signalling kg/00. 5, Highest ersion continuous voltage 0 COMPACT-FS NPE kg/00. 7, Nominal voltage SPD to EN SPD to IEC Lightning protection zone LPZ Nominal discharge current (8/20) Arrestor surge current (8/20) [total] Maximum discharge current oltage protection level Response time Maximum back-up fuse Temperature range Division unit TE (7.5 mm) Protection rating Connection cross-section, rigid Connection cross-section, multi-wire Connection cross-section, flexible U N I n I Total I max U p t A ϑ ka ka ka k ns A C mm² mm² mm² 0 COMPACT 5 0 COMPACT-FS class II+III class II+III <. <. < < IP20 IP20 2,5-0 2,5-0 2,5-0 2,5-0 2,5-0 2, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

45 Surge protection for telecommunication systems Data cable protection devices for telecommunications equipment Available as basic, medium and fine protection Low protection level at high current load Screwless terminals Bandwidth-optimised for secure transmission Quick mounting on hat rail or wall mounting Application: DSL systems, ISDN or analogue telecommunications Connection system Max. continuous operating Maximum continuous voltage c/dc Number of poles voltage c/ac TD-4/I Terminal Plastic Connection system Max. continuous operating Maximum continuous voltage c/dc Number of poles voltage c/ac TD-4/I-TAE-F Terminal Plastic Surge arrestor for telecommunication kg/00., Surge arrestor with TAE connection kg/00. 2, Surge protection systems TD-2/D-HS Plastic Connection Max. continuous Maximum continuous Number of system operating voltage c/dc poles voltage c/ac Terminal Surge arrestor for hat rail kg/00. 4, TD-4/I TD-4/I-TAE-F TD-2/D-HS 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Maximum continuous operating voltage c/ac Maximum continuous voltage c/dc Lightning protection zone LPZ Number of poles Nominal load current IL AC Nominal load current IL DC Capacity (wire-wire) Capacity (wire-earth) Serial impedance per path Total arrestor peak current (8/20) Total Impulse durability (0/3) Protection level line-line (a-ab/2a-2b) Protection level line-earth (a-ab/2a-2b-pe) Protection level screen-earth (S-PE) Temperature range Installation type Protection rating Shielding connection available Shield connection Connection cross-section, flexible Connection cross-section, multi-wire Connection cross-section, rigid Testing standard ϑ A A Ω ka ka C mm² mm² mm² ,4 0,4 0,4 0,2 0,2 0,2 < pf < pf < pf < 0 pf < 0 pf < pf 9Ω ± 0% 9Ω ± 0% 9Ω ± 0% 0 D: 2.5 D: 2.5 D: 5 ka Surface-mounted Surface-mounted Hat rail 35 mm IP54 IP20 IP20 Yes Yes No Indirect Indirect Direct 0,4-0,75 0,4-0,75 0,4-2,5 0,4-0,75 0,4-0,75 0,4-2,5 0,4-0,75 0,4-0,75 0,4-2,5 IEC IEC IEC LPA OBO 45

46 Surge protection for data technology Data cable protection devices for network technology up to 0 GBit/s Different connection systems available Low protection level at high current load Support for Power over Ethernet (POE) Tested transmission quality in networks up to 0 GBit (Class EA) Quick installation through connectable version Application: 0 GBit Ethernet, 0/00 MBit Ethernet, PoE applications Surge protection systems Surge arrestor for data technology PoE ND-CAT6A/EA 8-pole ersion Connection system RJ45 kg/00. 6, U max AC U max DC Lightning protection zone LPZ Channel performance ISO/IEC Channel performance Ansi/EA Total impulse durability into C2 (8/20) Impulse durability int C2 (wire-wire) oltage protection level line-earth oltage protection level line-line Rated current Serial impedance per wire Transmission frequency Protection rating Connection system Testing standard U c AC U c DC I L f g ka ka A Ω f ND-CAT6A/EA Class EA CAT 6A 7 0,5 <700 <20 0 MHz IP0 RJ45 IEC LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

47 Surge protection for data technology Data cable protection devices for network technology up to 0 GBit/s Different connection systems available Low protection level at high current load Support for Power over Ethernet (POE) Tested transmission quality in networks up to 0 GBit (Class EA) Quick installation through connectable version Application: 0 GBit Ethernet, 0/00 MBit Ethernet, PoE applications Connection system Max. continuous operating voltage c/ac Maximum continuous voltage c/dc Number of poles FRD 5 HF Terminal FRD 24 HF Terminal Connection system Max. continuous operating voltage c/ac Maximum continuous voltage c/dc MDP-4 D-5-T Terminal MDP-4 D-24-T Terminal Surge arrestor for HF applications Number of poles kg/00. 4,400 4,400 kg/00. 6,000 5, Surge arrestor for MCR circuits Surge protection systems FRD 5 HF FRD 24 HF MDP-4 D-5-T MDP-4 D-24-T 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Maximum continuous operating voltage c/ac Maximum continuous voltage c/dc Lightning protection zone LPZ Number of poles Rated current I L A 0,45 0,45 0,58 0,58 Serial impedance per path Ω 2.2 ± 0% 2.2 ± 0% 2.35 ± 5% 2,35 ± 5 % Impulse durability line-line C2: 8 k / 9 ka C2: 8 k / 9 ka C: 0.5 k / 0. ka C: 0.5 k / 0. ka Impulse durability line-earth C2: 8 k / 9 ka C2: 8 k / 9 ka C2: 5 K / 2.5 ka C2: 5 k / 2.5 ka Total Impulse durability (0/3) ka D: 6 D: 6 D: 2kA D: 2 Total arrestor peak current (8/20) ka ka 0 ka oltage protection level line-line oltage protection level line-earth Shielding connection available No No Yes Yes Shield connection - - Direct Direct Temperature range ϑ C Division unit TE (7.5 mm) Connection cross-section, flexible mm² 0,4-2,5 0,4-2,5 2,5 2,5 Connection cross-section, multi-wire mm² 0,4-2,5 0,4-2,5,5,5 Connection cross-section, rigid mm² 0,4-2,5 0,4-2,5 2,5 2,5 Testing standard IEC IEC IEC IEC LPA OBO 47

48 P type +2 lightning current and surge protection 600 and 900 DC Combination arrestor, type +2 for P systems aristor arrestor, screwless with cut-off unit in error-resistant Y circuit to DE (539-2) Surge protection equipotential bonding to DE (IEC ) Discharge capacity up to 2.5 ka (0/3) and ka (8/20) per pole Discharge capacity up to 7 ka (0/3) and ka (8/20) per pole Low DC protection level: < 2.6 k (oc max = 600 DC with -B+C/0-300 P) Low DC protection level: < 3.0 k (oc max = 900 DC with -B+C/0-4 P) With visual function display for the application in distributor housings Surge protection systems Application: Photovoltaic systems without or with separately insulated lightning protection system Protection devices to be selected depending on the maximum open-circuit voltage oc. P combination arrestor, 600 DC ersion U max DC -B+C 3-PH600 3-pole for P systems 600 kg/00. 4, P combination arrestor, 600 DC with remote signalling ersion U max DC -B+C 3PHFS600 3-pole for P systems with FS 600 kg/00. 49, P combination arrestor, 900 DC -B+C 3-PH900 ersion U max DC 3-pole for P systems 900 kg/00. 42, P combination arrestor, 900 DC with remote signalling ersion U max DC -B+C 3PHFS900 3-pole for P systems with FS 900 kg/00. 53, U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/3) Nominal discharge current (8/20) Maximum discharge current oltage protection level Response time Temperature range Protection rating Division unit TE (7.5 mm) Connection cross-section, rigid Connection cross-section, multi-wire Connection cross-section, flexible U c DC t I imp ka I n ka I max ka U p k ns A ϑ C mm² mm² mm² -B+C 3-PH900 -B+C 3PHFS900 -B+C 3-PH600 -B+C 3PHFS ,5 2, < 3.0 < 3.0 < 2.6 < 2.6 < < < < IP 20 IP 20 IP 20 IP ,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-2,5-2,5-2, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

49 P type 2 surge protection complete block 600 and,000 DC Surge arrestor, type 2, for P systems aristor arrestor, screwless with cut-off unit in error-resistant Y circuit to DE (539-2) Surge protection equipotential bonding to DE (IEC ) 20-C 3-PH-000 tested to EN 539- (DE / KEMA) Discharge capacity up to 40 ka (8/20) per pole Low DC protection level: < 4.0 k (oc max =,000 DC with 20-C/0-0 P) Low DC protection level: < 2.6 k (oc max = 600 DC with 20-C/0-300 P) With visual function display for the application in distributor housings Application: Photovoltaic systems without or with separately insulated lightning protection system Select the protection devices according to the maximum open-circuit voltage oc. ersion U max DC 20-C 3PH pole for P systems 600 P surge protection 20, 600 DC kg/00. 33, Surge protection systems P surge protection 20, 600 DC with remote signalling ersion U max DC 20-C 3PHFS pole for P systems with FS 600 kg/00. 4, C 3-PH-000 ersion U max DC 3-pole for P systems 000 P surge protection 20,,000 DC kg/00. 36, P surge protection 20, 000 DC with remote signalling (FS) ersion U max DC 20-C 3PHFS pole for P systems with FS 000 kg/00. 44, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 U max DC SPD to EN Lightning protection zone LPZ Nominal discharge current (8/20) Maximum discharge current oltage protection level Response time Temperature range Protection rating Division unit TE (7.5 mm) Connection cross-section, rigid Connection cross-section, multi-wire Connection cross-section, flexible U c DC t I n ka I max ka U p k ns A ϑ C mm² mm² mm² 20-C 3-PH C 3PHFS C 3PH C 3PHFS < 4.0 < 4.0 < 2.6 < 2.6 < < < < IP 20 IP 20 IP 20 IP ,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-2,5-2,5-2, LPA OBO 49

50 P system solution for inverter with 2/3 MPP trackers and MC4 connector System solution with MC4 connector for photovoltaic inverter with 2/3 separate MPP trackers aristor arrestor, connectable with cut-off unit in error-resistant Y circuit to DE (539-2) Low DC protection level: < 4.0 k (oc max =,000 DC with 20-C/0-0P) Low DC protection level: < 3.0 k (oc max = 900 DC with -B+C/0-4P) Two P string inputs (MC4 plug connector) at one MPP inverter input, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), U-resistant for use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Surge protection systems P system solution, type +2, for inverter with 2 MPP trackers, 900 DC ersion U max DC G-BC DCPH900-2 For two MPP and with MC4 connection 900 ersion U max DC G-BC DCPH900-3 For three MPP and with MC4 connection 900 kg/00. 43,000 kg/ , P system solution, type +2, for inverter with 3 MPP trackers, 900 DC P system solution, type 2, for inverter with 2 MPP trackers,,000 DC ersion U max DC G-C DCPH000-2 For two MPP and with MC4 connection 000 kg/00. 49, P system solution, type 2, for inverter with 3 MPP trackers,,000 DC ersion U max DC G-C DCPH000-3 For three MPP and with MC4 connection 000 kg/ , U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/3) Nominal discharge current (8/20) Maximum discharge current oltage protection level Response time Temperature range Protection rating U c DC t I imp ka I n ka I max ka U p k ns A ϑ C G-BC DCPH900-2 G-BC DCPH900-3 G-C DCPH000-2 G-C DCPH < 3.0 < 3.0 < 4.0 < 4.0 < < < < IP65 IP65 IP65 IP LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 OBO LPA

51 P system solution for inverter with 2/3 MPP trackers and connection terminals System solution for photovoltaic inverter with 2/3 separate MPP trackers aristor arrestor, connectable with cut-off unit in error-resistant Y circuit to DE (539-2) Low DC protection level: < 4.0 k (oc max =,000 DC with 20-C/0-0P) Low DC protection level: < 3.0 k (oc max = 900 DC with -B+C/0-4P) 88576, 88582: Per protection device there are 6 terminals up to 6 mm² pre-mounted in the housing, IN up to 30 A DC per terminal 88579, 88585: Per protection device there are 6 terminals up to 6 mm² pre-mounted in the housing, IN up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), U-resistant for use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! P system solution, type +2, for inverter with 2 MPP trackers, 900 DC ersion U max DC G-BCP 900K 330 For two MPP and with terminal connection 900 kg/ , Surge protection systems P system solution, type +2, for inverter with 3 MPP trackers, 900 DC ersion U max DC G-BCP 900K 333 For three MPP and with terminal connection 900 kg/ , P system solution, type 2, for inverter with 2 MPP trackers,,000 DC ersion U max DC G-CP 000K 330 For two MPP and with terminal connection 000 kg/ , P system solution, type 2, for inverter with 3 MPP trackers,,000 DC ersion U max DC G-CP 000K 333 For three MPP and with terminal connection 000 kg/ , LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/3) Nominal discharge current (8/20) Maximum discharge current oltage protection level Response time Temperature range Protection rating U c DC t I imp ka I n ka I max ka U p k ns A ϑ C G-BCP 900K 330 G-BCP 900K 333 G-CP 000K 330 G-CP 000K < 3.0 < 3.0 < 4.0 < 4.0 < < < < IP65 IP65 IP65 IP LPA OBO 5

52 P system solution with fuse holder System solution for photovoltaic fuses for photovoltaic inverters with MPP tracker Error-resistant Y circuit to DE (539-2) Low DC protection level: < 4.0 k (oc max =,000 DC with 20-C/0-0P) Item no.: 8865: (+) poles protected via 4 photovoltaic fuses 0x38 mm 0 A,,000 DC protected Item no.: 88652: (+) poles protected via 6 photovoltaic fuses 0x38 mm 8 A,,000 DC protected 4 / 6 (-) poles via terminal up 6 mm² switched in parallel in the housing, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), U-resistant for use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Surge protection systems Photovoltaic housing with 4 fuses U max DC G-C DCPH000-4S 000 kg/ , Photovoltaic housing with 6 fuses G-C DCPH000-6S U max DC 000 kg/ , Photovoltaic housing with 4 fuse holders, unequipped ersion U max DC G-C P000KS4 2 in housing with fuse holder (unequipped) 000 kg/00. 90, U max DC SPD to EN Lightning protection zone LPZ Nominal discharge current (8/20) Maximum discharge current oltage protection level Response time Connection cross-section, rigid Connection cross-section, flexible Temperature range Protection rating U c DC I n I max U p t A ϑ ka ka k ns mm² mm² C G-C DCPH000-4S G-C P000KS4 G-C DCPH000-6S < 4.0 < 4.0 < 4.0 < < < 0,5-6 0,5-6 0,5-0 0,5-6 0,5-6 0, IP65 IP65 IP LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

53 P system solution with circuit breaker System solution for circuit breaker photovoltaic inverter with MPP tracker aristor arrestor, connectable with cut-off unit in error-resistant Y circuit to DE (539-2) Low DC protection level: < 4.0 k (oc max =,000 DC with 20-C/0-0P) Low DC protection level: < 3.0 k (oc max = 900 DC with -B+C/0-4P) Circuit breaker (,000 ; 32 A) for secure switch-off of the DC string cable Per protection device there is terminal up to 6 mm² pre-mounted in the housing, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), U-resistant for use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! P system solution, type +2, to 900 DC with circuit breaker (32 A) ersion U max DC G-BC DC-TS and Benedikt LS32-SMA-A4 DC isolator 900 kg/00. 82, Surge protection systems P system solution, type 2, to,000 DC with circuit breaker (32 A) ersion U max DC G-C DC-TS000 2 and Benedikt LS32-SMA-A4 DC isolator 000 kg/00. 82, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/3) Nominal discharge current (8/20) Maximum discharge current oltage protection level Response time Temperature range Protection rating Connection cross-section String Connection cross-section PE U c DC t I imp ka I n ka I max ka U p k ns A ϑ C G-BC DC-TS900 G-C DC-TS < 3.0 < 4.0 < < IP65 IP65 0,5-0 0,5-0 0,5-0 2, LPA OBO 53

54 P system solution with connection terminals System solution for photovoltaic inverter with MPP tracker aristor arrestor, connectable with cut-off unit in error-resistant Y circuit to DE (539-2) Low DC protection level: < 2.6 k (oc max = 600 DC with -B+C/0-300P / 20-C/0-300P) Low DC protection level: < 3.0 k (oc max = 900 DC with -B+C/0-4P) Low DC protection level: < 4.0 k (oc max =,000 DC with 20-C/0-0P) For each protection device, there are 0 terminals up to 6 mm² pre-mounted in the housing, up to 30 A DC per terminal Pre-mounted in polycarbonate housing (IP65), U-resistant for use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Surge protection systems P system solution with connection terminals, type +2, 900 DC, incl. -Tec entry set G-BC DCPH900-4K U max DC 900 U max DC G-C DCPH000-4K 000 kg/00. 7,000 kg/00. 62, P system solution with connection terminals, type 2,,000 DC, incl. -Tec entry set U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/3) Nominal discharge current (8/20) Maximum discharge current oltage protection level Response time Connection cross-section, rigid Connection cross-section, flexible Temperature range Protection rating U c DC I imp I n I max U p t A ϑ ka ka ka k ns mm² mm² C G-BC DCPH900-4K G-C DCPH000-4K < 3.0 < 4.0 < < 0,5-6 0,5-6 0,5-6 0, IP65 IP LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

55 P system solution with MC4 connector System solution with MC4 connector for photovoltaic inverter with MPP tracker aristor arrestor, connectable with cut-off unit in error-resistant Y circuit to DE (539-2) Low DC protection level: < 2.6 k (oc max = 600 DC with -B+C/0-300P / 20-C/0-300P) Low DC protection level: < 3.0 k (oc max = 900 DC with -B+C/0-4P) Low DC protection level: < 4.0 k (oc max =,000 DC with 20-C/0-0P) One P string input (MC4 plug connector) at one MPP inverter input, up to 5 A DC MC4 connector Pre-mounted in polycarbonate housing (IP65), weather-resistant for use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! G-BC DCPH-Y600 Photovoltaic housing, type +2, with MC connector 600 DC U max DC 600 kg/00. 74, Surge protection systems G-BC DCPH-Y900 Photovoltaic housing, type +2, with MC connector 900 DC U max DC 900 kg/00. 78, G-C DCPH-Y600 Photovoltaic housing, type 2, with MC connector 600 DC U max DC 600 kg/00. 66, Photovoltaic housing, type 2, with MC connector,000 DC U max DC G-C DCPH-Y kg/00. 69, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 U max DC SPD to EN Lightning protection zone LPZ Impulse discharge current (0/3) Nominal discharge current (8/20) Maximum discharge current oltage protection level Response time Temperature range Protection rating U c DC t I imp ka I n ka I max ka U p k ns A ϑ C G-BC DCPH-Y600 G-BC DCPH-Y900 G-C DCPH-Y600 G-C DCPH-Y , < 2.6 < 3.0 < 2.6 < 4.0 < < < < IP65 IP65 IP65 IP LPA OBO 55

56 P system solution, unequipped System solution for photovoltaic inverter with MPP tracker, unequipped Error-resistant Y circuit with 3 varistors for use according to DE : Per protection device there are terminals up to 6 mm² pre-mounted in the housing, up to 30 A DC per terminal 88699: One P string input (NC4 plug connector) at a MPP inverter input, up to 5 A DC MC4 connector Unequipped, order covers separately Pre-mounted in polycarbonate housing (IP65), U-resistant for use outside, including cable gland kit For DC protection of the inverter in photovoltaic systems. If there is a danger of condensation forming through wind, ice, temperature or sunlight, further measures may be necessary! Surge protection systems Photovoltaic housing for inverter with 2 MPP trackers, unequipped ersion U max DC G-C DC-PH-2 in housing with MC4 connector. 000 ersion U max DC G-C DC-PH-3 in housing with MC4 connector. 000 kg/ ,000 kg/ , Photovoltaic housing for inverter with 3 MPP trackers, unequipped Photovoltaic housing with connection terminals, unequipped ersion U max DC G-BCP U K 330 Protection for two separate MPP trackers 000 kg/ , Photovoltaic housing with connection terminals, unequipped U max DC G-BCP U K kg/ , U max DC Connection cross-section, rigid Connection cross-section, flexible Temperature range Protection rating U c DC mm² mm² ϑ C G-C DC-PH-2 G-C DC-PH-3 G-BCP U K 330 G-BCP U K ,5-0 0,5-0 0,5-6 0, IP65 IP65 IP65 IP LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

57 P lightning and surge protection covers Cover, combination and surge controller, type +2 and 2 arrestors for photovoltaic systems Lightning and surge voltage protection equipotential bonding to DE (IEC ) Arrestor, connectable with thermodynamic cut-off unit and function display High current carrying capacity with long lifespan Application: Lightning and surge protection for P systems -B+C 0-300P -B+C 0-4P P cover - lightning and surge arrestor, type +2 ersion U max DC -pole, P cover with Y base to 600 DC 300 ersion U max DC -pole, P cover with Y base to 900 DC 4 kg/00. 8,200 kg/00. 9, P cover - lightning and surge arrestor, type Surge protection systems 20-C 0-300P U max DC 300 P cover - surge arrestor, type 2 kg/00. 5, C 0-0P U max DC 0 P cover - surge arrestor, type 2 kg/00. 6, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 U max DC SPD to EN SPD to IEC Lightning protection zone LPZ Nominal discharge current (8/20) Impulse discharge current (0/3) Maximum discharge current oltage protection level Response time Maximum back-up fuse Temperature range Protection rating Division unit TE (7.5 mm) U c DC I n I imp I max U p t A ϑ ka ka ka k ns A C -B+C 0-300P -B+C 0-4P 20-C 0-300P 20-C 0-0P class I+II class I+II class II class II , <.3 <.5 <.3 < 2.0 < < < < IP20 IP20 IP20 IP LPA OBO 57

58 P lightning and surge protection bases Base for combination and surge controller, type +2 and 2 for photovoltaic systems Error resistant Y circuit with 3 varistors Lightning and surge protection equipotential bonding to DE (IEC ) For encapsulated, non-extinguishing zinc oxide varistor arrestor for use in distributor housings Bases unequipped Application: Lightning and surge protection for P systems P base, 3-pole in Y circuit Surge protection systems ersion 20-C U-3PH-Y 3-pole Y circuit for P P base, 3-pole in Y circuit with remote signalling ersion kg/00. 7, C U-3PH-Y-FS 3-pole Y circuit for photovoltaic systems with FS kg/00., P base, 2-pole in Y circuit ersion 20-C U-2 PH 2-pole for earthed P systems kg/00. 4, P base, 2-pole in Y circuit with remote signalling ersion 20-C U-2 PH+FS 2-pole for earthed P systems with FS kg/00. 8, Temperature range Protection rating Division unit TE (7.5 mm) Connection cross-section, rigid Connection cross-section, multi-wire Connection cross-section, flexible ϑ C mm² mm² mm² 20-C U-3PH-Y 20-C U-3PH-Y-FS 20-C U-2 PH 20-C U-2 PH+FS IP20 IP20 IP20 IP ,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-35 2,5-2,5-2,5-2, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

59 Accessories Shock Guard locking for strong vibrations Colour ersion MB-SG Blue Locking system for covers 00 kg/00. 0, PA Polyamide Shock Guard: Locking for connector technology on MultiBase bases Locking system for the plug-in modules/covers ibration and shock-tested Use in housing hole of the connection terminals Upper parts can be removed without tools Colour ersion AS 3x6 Light grey 3 x 6 mm² Connection terminal type: AS 3x6 Connection terminal for wiring kg/ , /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Surge protection systems Connection cross-section: 3 x.5-6 mm² rigid/ multiple strands 3 x.5-0 mm² fine-wire/with wire end sleeve Stripping length: 6 mm Rec. tightening torque:.2 Nm Nominal current: A Width: 7.5 mm ( TE) For EM-optimised through-wiring to IEC (DE ). LPA OBO 59

60 60 OBO LPA 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205

61 Equipotential bonding systems Indoors 62 Outdoors 62 Industrial area 63 Connection and bridging components 64 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 LPA OBO 6

62 Equipotential bonding systems, interior and exterior areas Equipotential bonding rail for cellars, DE-tested Colour 80 DE Grey CuZn Brass kg/00. 55, Equipotential busbar for equipotential bonding according to DIN DE / -540 and lightning protection equipotential bonding according to DIN DE According to DE 068, part With clamping rail 0 x 0 mm, nickel-plated brass With close-contact series terminals made of electrogalvanised steel Cover hood and rail stand made of grey polystyrene Lightning current carrying capacity 00 ka (0/3) Tension clamp with screw lock against self-loosening (e.g. required in industry and in explosion-protected areas) Equipotential bonding systems Connection options: 7 single or multi-wire cables 2.5- mm² or fine-wire cables to 6 mm² (max. Ø 7 mm) 2 single or multi-wire cables -95 mm² or fine-wire cables to 70 mm² (max. Ø 3.5 mm) flat conductor 30 x 3.5 mm Equipotential bonding rail for cellars Colour 809 Grey CuZn Brass kg/00. 23, Equipotential busbar for equipotential bonding according to DIN DE /-540 and lightning protection equipotential bonding according to DIN DE Base plate and covering hood from polystyrene, grey Contact strip made of nickel-plated brass Screws and crossbar made of electrogalvanised steel Capable of carrying lightning current 00 ka (0/3) Connection options: 7 x single or multi-core conductors to mm² or fine-core conductors to 6 mm² x round cable Rd 8-0 x flat strip to FL30 or round cable Rd 8-0 Minimum order quantity Equipotential bonding rail, outside installation Colour 809 A Black 2A Stainless steel, grade 304 kg/00. 23,000 5 Equipotential busbar for equipotential bonding according to DIN DE /-540 and lightning protection equipotential bonding according to DIN DE Base plate and cover hood from polystyrene Colour: black, U-resistant Screws and crossbar made of A Capable of carrying lightning current 00 ka (0/3) Connection options: 7 x single or multi-core conductors to mm² or fine-core conductors to 6 mm² x round cable Rd 8-0 x flat strip to FL30 or round cable Rd LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

63 Equipotential bonding systems, industrial area A A Number of Width Length Height connections mm mm mm BigBar equipotential bonding rail kg/00. 90,000 90, A Stainless steel, grade 304 Main potential equalisation to DE 000 Part 40 and Part 540, and also lightning protection potential equalisation to DE (IEC 62305) Insulation feet Quick, simple assembly of connection conductors to the contact rail using lock bolts M0 The high-grade stainless steel versions (2A) are suitable for outdoor use Complete with anchors and bolts for wall mounting With lock washer (DIN 37) for bolt locking against loosening (e.g. required in industry and Ex areas) 802 AH AH 0 Number of connections 5 0 2A Stainless steel, grade 304 Complete with all installation components Connection option 802 KL FL20-FL40 2A Stainless steel, grade 304 To clamp the flat conductors 30 x 3.5 and 40 x 5 Suitable for equipotential bonding rail BigBar, type 802 Cover hood for BigBar kg/00.,800 36,300 kg/00. 7, Crossbar for BigBar Equipotential bonding systems Fit A mm mm A-OT Rd A Stainless steel, grade 304 For round cable Rd 8-0 Suitable for M0 bolts Crossbar for equipotential bonding rail kg/ , /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ A A A L A B G mm mm mm mm A Stainless steel, grade 36 Ti 805/...: For connecting different earthing systems With 2 mounting holes Ø mm 805/2: With 4 attaching holes 805/4: With 8 attaching holes 805/6: With 2 attaching holes Earth connection block kg/00. 54,800 77,000 97, LPA OBO 63

64 Connection and bridging components Crossbar Rd 8 0 mm ALU-OT Al Aluminium A Fit mm mm 44 Rd 8-0 For round conductor fastening Rd 8 0 Suitable for M0 bolts Application: Equipotential bonding on P frames 00 kg/00. 2, /00 pc. Crossbar Rd 8 0 mm Fit A mm mm ST-OT Rd For round cable fastening RD 8-0 Suitable for M0 bolts kg/ , St Steel FT Hot-dip galvanised /00 pc. Equipotential bonding systems Crossbar Rd 8 0 mm Fit A mm mm A Rd A Stainless steel, grade 304 For T, cross and parallel connectors Quick installation using hexagonal bolt M0 x 30, high-grade stainless steel Conforms to the requirements according to DIN DE (IEC 62305) kg/ , /00 pc. Crossbar Rd 6 mm Fit mm 249 A-OT 6 2A Stainless steel, grade 304 For round conductor fastening RD 6 Suitable for M0 bolts 00 kg/00. 5, /00 pc. ario quick connector Alu Fit A mm mm ALU Rd Al Aluminium For T, cross and parallel connectors Quick installation using hexagonal bolt M0 x 30, high-grade stainless steel Conforms to the requirements according to DIN DE (IEC 62305) ario quick connector A Fit A mm mm A Rd A Stainless steel, grade 304 kg/ ,600 For T, cross and parallel connectors Quick installation using hexagonal bolt M0 x 30, high-grade stainless steel Conforms to the requirements according to DIN DE (IEC 62305) kg/ , /00 pc /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

65 Connection and bridging components Fit A terminal block 324 S-A mm Rd kg/00. 3, A Stainless steel, grade 304 Including hexagonal bolt M8 x, washer and nuts /00 pc. 32 Fit Connector, Rd 8 0 mm with pressure trough mm 0 N-A Rd 8-0 2A Stainless steel, grade 304 With fix contact clamping screw, nut and serrated washer Including pre-mounted pressure sump, steel Conforms to the requirements according to DIN DE (IEC 62305) Fit mm 02 N-A Rd 8-0 2A Stainless steel, grade 304 With 2 fix contact clamping bolts, nuts and serrated washers With pre-mounted pressure trough made of A Corresponds to the requirements of DE (IEC 62305) kg/ ,800 kg/ , /00 pc. Connector, Rd 8 0 mm, double, with pressure trough /00 pc. Equipotential bonding systems 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ L mm Cu Copper From flexible copper cable 6 mm² Coating: black, chlorinated india rubber mixture With mounting hole Ø 0.5 mm per attachment side With 2 mounting holes Ø 7.3 mm per attachment side For applications outside or inside suitable 288 DIN Al Aluminium With attaching hole Ø mm With 2 x 4 mounting hole Ø 5.2 mm With 2 x 2 mounting hole Ø 6.9 mm Bridging cable kg/00. 4,840 7,260 9,680 kg/ , /00 pc. Bridging strap /00 pc. LPA OBO 65

66 66 OBO LPA 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205

67 Earthing systems Flat conductor 68 Round conductor 68 Cross-connector 68 ario quick connector 68 Connection terminal 69 Earthing fixed point 69 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 LPA OBO 67

68 Cable material Flat conductor, galvanised steel W x H Cross Normal Normal section ring ring mm mm² ca. m ca. kg 52 DIN 30X x According to DIN EN 64-2 (DE 085 Part 202) Meets the requirements of DE (IEC 62305) Zinc coating: 0 g/m² (approx. 70 µm) For lightning protection, earthing systems and ring equipotential bonding kg/00 m 84, St Steel FT Hot-dip galvanised price/00 m Flat conductor, stainless steel W x H Cross Normal Normal section ring ring mm mm² ca. m ca. kg 52 4A 30X x A Stainless steel, 36Ti / 36L kg/00 m 82,4 According to DIN EN 64-2 (DE 085 Part 202) Corresponds to the requirements of DE (IEC 62305) According to the foundation earther standard DIN 804, 4A is required in the earth For use in areas at risk of corrosion For lightning protection, earthing systems and ring equipotential bonding price/00 m B B H H Round conductor, galvanised steel Nominal size Ø Cross Normal Normal section ring ring mm mm² ca. m ca. kg RD According to DIN EN 64-2 (DE 085 part 202) Conforms to the requirements according to DIN DE (IEC 62305) RD 0 can also be used in earth Zinc coating: 3 g/m² (approx. µm) kg/00 m 63, St Steel FT Hot-dip galvanised price/00 m D Earthing systems Round conductor, stainless steel Nominal size Ø Cross Normal Normal section ring ring mm mm² ca. m ca. kg RD 0-4A A Stainless steel, 36Ti / 36L kg/00 m 63,000 According to DIN EN 64-2 (DE 085 Part 202) Corresponds to the requirements of DE (IEC 62305) RD 0-4A for applications in the earth According to the foundation earther standard DIN 804, 4A is required in the earth price/00 m D Cross-connector Fit 2 4A mm Rd 8-0/FL30 0 kg/00. 0, A Stainless steel, grade 36 Ti Fit: Rd 8-0 x Rd 8-0 Fit: Rd 8-0 x FL 30 Fit: FL 30 x FL 30 Installed with 2 hexagonal bolts M8 x 20 (F) ario quick connector Fit A mm mm A Rd A Stainless steel, grade 304 For T, cross and parallel connectors Quick installation using hexagonal bolt M0 x 30, high-grade stainless steel Conforms to the requirements according to DIN DE (IEC 62305) kg/ ,700 /00 pc /00 pc LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

69 L Cable material Diagonal clamp 0 L 88 2 A-A L Fit mm mm 40 Rd 6-22/max. FL 0 kg/00. 28, A Stainless steel, grade 304 /00 pc. For reinforced steels Ø 6-22 mm and flat conductor x 4 Installed with screws M0 x 40 AS version with screws M0 x 20 Simple installation with open slot F T Fit T L Clamping range mm mm mm mm 04 DIN-FT 2 Rd max DIN-FT 20 Rd Connection terminal 0 0 kg/00. 8,730 30, TG Cast iron FT Hot-dip galvanised /00 pc Flange thickness to 2 or 0 20 mm With pre-mounted Fix-Kontakt clamping screw 00 2 hexagonal bolts M8 x 20, screws made of hot galvanised steel Terminal block made of malleable iron, hot galvanised Mounting of the round conductors either vertical or transverse to structure Corresponds to the requirements of DIN DE Earthing fixed point M0/M ø 8 ø0 Thread 205 B-M0 A 205 B-M2 A M0 M2 0 0 kg/00.,0, A Stainless steel, grade 36 L B H Connection to earthing systems, arrestors and reinforcement Contact plate: Ø 79 mm, made of rustproof stainless steel (4A) Clamping bolt Ø 0 mm, rustproof (2A) Incl. plastic cover for simple installation Width Length mm m Plastic corrosion protection strip kg/00. 7,0 22, Earthing systems Petrolatum Approx.. mm thick Width: mm or 00 mm, made of petrolatum-coated chemical fibre fabric Can be processed cold 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 6 ø KS KS-20 Length Nominal size Ø mm mm /0 20 6/0 Earth entry rod, tapered and partially insulated kg/ ,000 30, St Steel FT Hot-dip galvanised 6 mm earth entry with 0 mm connection With mounted heat-shrinkable sleeve (corrosion protection) LPA OBO 69

70 70 OBO LPA 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205

71 Cable routing Mesh cable tray systems 72 Cable tray systems 78 ertical ladder systems 82 Mounting systems 83 Wall and ceiling trunking 85 Cable and pipe fastening systems, plastic 92 Cable and pipe fastening systems, metal 94 Pipe systems 96 Junction box systems 0 Cable gland systems, plastic 05 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Clip cable ties chamber 08 2 chambers LPA OBO 7

72 Mesh cable tray systems GR-Magic mesh cable tray, side height 35 mm GRM 35 FT GRM FT GRM 35 FT GRM FT GRM FT Width Wire Ø Length Useful crosssection mm mm mm cm² , kg/00 m 46,300,400 64,0 78,600 62, St Steel FT Hot-dip galvanised /m Mesh cable tray with shaped connector of side height 35 mm. Magnetic shield insulation without cover 5 db, with cover db. No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is x 00 mm. GR-Magic mesh cable tray, side height 55 mm GRM 55 FT GRM FT GRM 55 FT GRM FT GRM FT GRM FT GRM FT GRM 55 4 FT GRM 55 0 FT GRM FT Width Wire Ø Length Useful crosssection.0 m.5 m 2.0 m mm mm mm cm² kn/m kn/m kn/m kg/00 m 70,000 75,667 90,000 04,667 54,300 98, , , ,700 33, St Steel FT Hot-dip galvanised /m Mesh cable tray with shaped connector of side height 55 mm. Magnetic shield insulation without lid 5 db, with lid db. You can find detailed information regarding the UL classification in the respective certification. No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is x 00 mm (exception: GRM 55/ = 20 x 00 mm). GR-Magic mesh cable tray, side height 05 mm Cable routing GRM FT GRM 05 FT GRM FT GRM FT GRM FT GRM 05 4 FT GRM 05 0 FT GRM FT Width Wire Ø Length Useful crosssection mm mm mm cm² kg/00 m 03,700 6, , , , , , , St Steel FT Hot-dip galvanised /m Mesh cable tray with shaped connector of side height 05 mm. Magnetic shield insulation without cover 5 db, with cover db. No additional connection components are required for the mesh cable tray, it is simply interlocked. The grid width is x 00 mm. Unperforated cover DRLU 0 A430 DRLU 00 A430 DRLU A430 DRLU 200 A430 DRLU 300 A430 DRLU 400 A430 DRLU 0 A430 DRLU 600 A430 Width Plate Length thickness mm mm mm kg/00 m 60,000 99,000 38,200 78,000 6, ,300 56,00 64, A Stainless steel, grade 304 /m Cover for cable trays and mesh cable trays. When using covers outdoors, additional measures against the influence of wind must be taken. Cover clamps or sash locks on their own are not sufficient securing elements against wind loads. Cross beading from 0 mm width B+4 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

73 Mesh cable tray systems Tightening strap for cover fastening B B t t Minimum breaking Colour Shipping box load mm kn m SW 7 x.0 2. Black 2 2A Stainless steel, grade 30 m kg/00 m 6, price/00 m Tightening strap made of rustproof steel and with plastic covering for fastening on cable trays and ladders A430 Shipping box 800 2A Stainless steel, grade 304 Tightening strap lock kg/ , /00 pc. Tightening strap lock for single-sided locking of tightening strap in problematic areas. L Length Colour Shipping box mm mm BA 7 x Blue anthracite BA 7 x.0 4 Blue anthracite GNBG 6.5 x.2 5 Green-beige GNBG 6.5 x.2 6 Green-beige 2 Tightening strap in fixed lengths kg/00. 2,40 3,260 4,660 5, A Stainless steel, grade 30 /00 pc. Tightening strap, 574/03/A and 574/05/A, completely pre-terminated with tightening strap lock. Spring chuck 575 St Steel For tightening strap 574/... Mounting of the tightening strap:. Cut the strap to the right length, push it through the lock and turn it over. 2. Loop the strap around the cable, push the loose end through the lock. 3. Tighten the end of the strap with the pliers. 4. Turn the end of the taut strap with the pliers. Remove the pliers. 5. Completely turnover the turned end of the strap with the hammer, secure the end of the strap by hitting the two standing lobes of the lock. kg/00. 29, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 TrayFix-6-L Tray fastening system set 6 kg with TrayFix large Label description field Minimum width of the cable tray or mesh cable tray: 00 mm kg/ , Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO cable tray systems MKSM, SKSM and IKSM Adapted to OBO mesh cable tray systems with a minimum width of 00 mm Set consisting of TrayFix mounting adapter and concrete block including base for FangFix system 6 kg TrayFix-6-S Label description field Minimum width of the mesh cable tray: 00 mm Tray fastening system set 6 kg with TrayFix small kg/ , Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO mesh cable systems with a minimum width of 00 mm Set consisting of clamping piece, fastening plug and concrete block including base for FangFix system 6 kg Cable routing LPA OBO 73

74 Mesh cable tray systems Tray fastening system set 0 kg with TrayFix large Label description field TrayFix-0-L Minimum width of the cable tray or mesh cable tray: 00 mm kg/00..00, Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO cable tray systems MKSM, SKSM and IKSM Adapted to OBO mesh cable tray systems with a minimum width of 00 mm Set consisting of TrayFix mounting adapter and concrete block including base für FangFix system 0 kg Tray fastening system set 0 kg with TrayFix small Label description field TrayFix-0-S Minimum width of the mesh cable tray: 00 mm kg/ , Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO mesh cable systems with a minimum width of 00 mm Set consisting of clamping piece, fastening plug and concrete block including base for FangFix system 0 kg Mounting adapter for mesh cable trays on stand systems TrayFix ø20mm kg/00. 9, /00 pc. Mounting system for the fastening of mesh cable trays and cable trays on FangFix stone e.g. cable routing on a flat roof. Adapted to OBO cable tray systems MKSM, SKSM and IKSM Adapted to OBO mesh cable tray systems with a minimum width of 00 mm Stand FangFix system 6 kg F-FIX-S6 Nominal size Ø mm 365 kg/ , Concrete /00 pc. 6 kg stone of Ø 365 mm, high level of stability Concrete, frost-resistant Stackable Cable routing Nominal size Ø mm F-FIX-B6 373 PP Polypropylene Edge protection with integrated dowel (basic) suitable for FangFix system. Stand FangFix system 0 kg Nominal size Ø mm F-FIX-S0 289 Concrete 0 kg stone of Ø 289 mm, high level of stability Concrete, frost-resistant Stackable 0 kg/00. 6, /00 pc. kg/ , /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

75 Mesh cable tray systems Nominal size Ø mm F-FIX-B0 295 PP Polypropylene Stand FangFix system 0 kg Edge protection with integrated dowel (basic) suitable for FangFix 0 system. kg/ , /00 pc. TSG 30 DD Side Length height mm mm kg/00 m 38, TSG 30 A , St Steel 2A Stainless steel, grade 304 DD Zinc-aluminium coated, double-dip /m Barrier strip for separation of cables of different voltages or functions. Side Length height TSG 85 DD mm mm Barrier strip kg/00 m 70, TSG 85 A , St Steel 2A Stainless steel, grade 304 DD Zinc-aluminium coated, double-dip /m Barrier strip for separation of cables of different voltages or functions. Hold-down clamp for barrier strip fastening KS GR A430 2A Stainless steel, grade 30 Hold-down clamp for fastening barrier strips in mesh cable trays. 30 kg/00. 0, /00 pc. Barrier strip connector TSG A430 0 kg/00., A Stainless steel, grade 30 Barrier strip connector for screwless connection of the TSG barrier strip in all side heights. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ GS 34 FT kg/ , GS 34 A , St Steel 2A Stainless steel, grade 304 FT Hot-dip galvanised Screwed version of joint connector for mesh cable trays. Including FRS M6 x 20 bolt with flange nut. GR 245 DD Width mm 245 Joint connector Quick connector kg/ , St Steel DD Zinc-aluminium coated, double-dip Long mesh cable tray connection for screwless straight connection of mesh cable trays. Two straight connectors, type GR 245, are used for each connection point. Cable routing LPA OBO 75

76 Mesh cable tray systems Clamping piece 34 GKS 34 FT kg/ , GKS 34 A , St Steel 2A Stainless steel, grade 304 FT Hot-dip galvanised Clamp for fastening mesh cable trays to wall or support brackets. Including FRS M6 x 20 bolt with flange nut. 22 Clamping piece GKB 34 A 20 kg/00., A Stainless steel, grade 304 Clamp for fastening mesh cable trays of width mm to the floor. Clamping piece GKT 38 FT kg/ , GKT 38 A , St Steel 2A Stainless steel, grade 304 FT Hot-dip galvanised Clamping piece for fastening barrier strips in mesh cable trays. Including FRS M6 x 20 bolt with flange nut. Earthing clip 939 Shipping box kg/00. 5, St Steel G Electrogalvanised /00 pc. For cables to 6 mm² and flat conductors Fit: cable to 6 mm² x max. FL 30 With riveted brass connection terminal and one cylinder bolt, M5 x 2, with two cylinder bolts, M6 x 6 Earthing screw Cable routing B B 3302 L l Cross section SW Thread mm mm mm² mm M M6 kg/00. 3,00 4, CuZn Brass BK Bright /00 pc. Earthing screw for fastening the equipotential bonding wire to the cable support system. Wall clamp and central hanger x 6 K2 88 A430 2A Stainless steel, grade 304 Wall clamp and central hanger for mesh cable trays. Recommendation: As wall mounting up to max. mesh cable tray width 200 mm. As centre suspension up to max. mesh cable tray width 200 mm. As a trapeze suspension from a width of 300 mm. kg/00. 7, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

77 Mesh cable tray systems MPG 65 FT MPG 90 FT MPG 65 A4404 MPG 90 A4404 A B x y mm mm mm mm Mounting plate kg/00. 9,200 6,800 8,800 6, St Steel 4A Stainless steel, grade 36 L FT Hot-dip galvanised Mounting plate for screwless fastening on mesh cable trays Hold-down clip 67 BC GR MS A kg/00., A Stainless steel, grade 30 Hold-down clip for the screwless mounting of mesh cable trays onto MS profile rails. ersion W x H Material Length thickness mm mm mm MS 4 L 200 FT Perforated 4x MS 4 L 300 FT Perforated 4x MS 4 L 400 FT Perforated 4x MS 4 L 0 FT Perforated 4x MS 4 L 600 FT Perforated 4x MS 4 L 700 FT Perforated 4x MS 4 L 800 FT Perforated 4x MS 4 L 900 FT Perforated 4x Mounting rail, MS 4 kg/00. 52,400 78,0 04,700 30,800 56,900 83, , , St Steel FT Hot-dip galvanised /00 pc. Heavy-duty profile/mounting rail with continuous perforation in base, slot width 22 mm. Drop-out plate 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 KAB GR FT kg/ , St Steel FT Hot-dip galvanised Drop-out plate for mesh cable trays. The drop-out plate allows compliance with specific bend radii (fibre-optic cables), thus preventing possible cable breaks. Can be mounted in a lengthwise direction and at the side, can be arranged for greater widths. Cable routing LPA OBO 77

78 Cable tray systems Cable tray RKS-Magic RKSM 60 FT RKSM 65 FT RKSM 620 FT RKSM 630 FT RKSM 640 FT RKSM 6 FT RKSM 660 FT Width Plate Length thickness Useful crosssection x y mm mm mm cm² mm mm kg/00 m 72,460 28,030 24,640 3, ,340 54,340 67, St Steel FT Hot-dip galvanised /m RKSM 60 = efficient magic cable tray system with 60 mm side height. Magnetic shield insulation without cover 20 db, with cover db. Cable tray with quick connection system, including all the relevant connection components for time-saving and economic installation, with beaded straight base perforation, 7 x 20 mm, for bracket mounting and, from the width 200 mm, with 7 x 32 mm transverse beading for cable ventilation and simplified mounting. With mm perforation for direct threaded rod suspension. Continuous side perforation, 7 x 20 mm, as connector perforation. The stock length is 60 mm, the usable length when combined is 60 mm. The spring element FED 60 can be ordered separately as a accessory part (spare) for the cable tray RKS-Magic with a side height of 60 mm under the article number The continuous equipotential bonding is guaranteed without additional components. DE and function maintenance (DIN 402 Part 2) tested cable tray system. MKS cable tray MKSM 60 FT MKSM 65 FT MKSM 620 FT MKSM 630 FT MKSM 640 FT MKSM 6 FT MKSM 660 FT Width Plate Length thickness Useful crosssection x y L mm mm mm cm² mm mm mm kg/00 m 80,000 29, , , ,6 36, , St Steel FT Hot-dip galvanised /m MKSM 60 = Medium-duty Magic cable tray system with a side height of 60 mm. Cable tray with quick connection system, including all the relevant connection components for time-saving and economic installation, with beaded straight base perforation, 7 x 79 mm, for bracket mounting. All widths with cross beading for stabilisation and trunking ventilation. Continuous side perforation, 7 x 20 mm, as additional connector perforation. From a cable tray width of 200 mm, they are suitable for use under sprinkler systems according to ds guideline 2092 permeable cable tray system with 30% hole surface. The stock length is 3,0 mm, the usable length when combined is 3,000 mm. The spring element FED 60 can be ordered separately as an accessory part (spare) for the Magic cable trays of side height 60 mm, 85 mm and 0 mm under the article number Continuous equipotential bonding is guaranteed without additional components. DE-tested cable tray system. 30 B L X Y x79 7x37 Cable routing Barrier strip TSG 60 A430 Side Length height mm mm Barrier strip for separation of cables of different voltages or functions. kg/00 m 55, A Stainless steel, grade 304 /m Barrier strip connector TSG A430 2A Stainless steel, grade 30 kg/00. 0,000 Barrier strip connector for screwless connection of the TSG barrier strip in all side heights LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

79 Cable tray systems Clamping piece for barrier strip fastening KS KR A kg/00. 0, A Stainless steel, grade 30 /00 pc. Clamping piece for screwless fastening of barrier strips in the cable tray types RKSM, MKS and SKS RLK 60 FT Side height mm 60 Straight connector kg/ , x 8 St Steel FT Hot-dip galvanised Straight connector for straight connection of cable trays and fittings with a side height of 60 mm. Including appropriate fastening material. Straight and angle connector RWL 60 FT Side height mm 60 0 kg/00. 7, St Steel FT Hot-dip galvanised Straight and angle connector for cable trays and fittings with a side height of 60 mm. Including appropriate fastening material. Adjustable connector RG 60 FT Side height mm 60 0 kg/00. 24, St Steel FT Hot-dip galvanised Adjustable connector for cable trays with a side height of 60 mm. Including appropriate fastening material. B Magic straight connector set 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ KTSM 60 DD KTSM 65 DD KTSM 620 DD KTSM 630 DD KTSM 640 DD KTSM 6 DD KTSM 660 DD Side Width height mm mm kg/00. 30,0 34,900 37,200 44,000,700 57,400 64, St Steel DD Zinc-aluminium coated, double-dip Cable tray connector with quick fastening for the screwless connection of perforated cable trays with a side height of 60 mm. The optimised design means that the connector can be used to create radii and as a length compensation piece for large temperature deviations. Cable routing LPA OBO 79

80 Cable tray systems Magic straight connector FM 60 DD FM 65 DD FM 620 DD FM 630 DD FM 640 DD FM 6 DD FM 660 DD Side Width height mm mm kg/00. 3,900 37,900 44,000 57,000 69,400 82,000 94, St Steel DD Zinc-aluminium coated, double-dip Magic straight connector for direct and screwless joining of Magic fittings with a side height of 60 mm. The straight connector is equipped with four brackets and can also be used for the direct connection with a cut cable tray with only two brackets mounted to one side. To join a cut cable tray with a fitting, an additional Magic straight connector set is needed. 60,5 35 B 7x5 7 x 24 Bend, variable RBM 60 FT RBM 65 FT RBM 620 FT RBM 630 FT RBM 640 FT RBM 6 FT RBM 660 FT L Width Length Plate thickness mm mm mm mm St Steel FT Hot-dip galvanised Magic bend 0 90, variable, with quick connector system. For all cable tray types of 60 mm side height. L 60, B 90 Magic bend Width 90 RBM FT RBM FT RBM FT RBM FT RBM FT RBM 90 6 FT RBM FT mm kg/00. 70,0 98,700 30, , , ,0 530, B R St Steel FT Hot-dip galvanised 90 bend with quick connector system. For all cable tray types of 60 mm side height. Cable routing Magic add-on tee RAAM 60 FT RAAM 65 FT RAAM 620 FT RAAM 630 FT RAAM 640 FT RAAM 6 FT RAAM 660 FT Width mm kg/00. 40,600 47,0 54,300 68,00 82,000 05,400 0, St Steel FT Hot-dip galvanised Add-on tee with quick connector system. For all cable tray types of 60 mm side height. Magic T branch piece RTM 60 FT RTM 65 FT RTM 620 FT RTM 630 FT RTM 640 FT RTM 6 FT RTM 660 FT Width mm kg/00. 89,600 23,000 6,0 2, , , , St Steel FT Hot-dip galvanised T branch piece with quick connector system. For all cable tray types of 60 mm side height. 33, B+00 B B+80 B B+200 R 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

81 Cable tray systems B+4 DRL 00 A430 DRL 200 A430 DRL 300 A430 DRL 400 A430 DRL 0 A430 DRL 600 A430 Width Plate Length thickness mm mm mm Cover with sash lock kg/00 m 05,000 85, , ,000 6, , A Stainless steel, grade 304 /m Cover for cable trays and cable ladders with three pairs of sash locks. When using covers outdoors, additional measures against the influence of wind must be taken- Cover clamps or sash locks on their own are not sufficient securing elements against wind loads. Transverse bead from 0 mm width. 90 B DFBM DD DFBM 90 DD DFBM DD DFBM DD DFBM DD DFBM 90 0 DD Width Plate thickness mm mm Cover for 90 Magic bend kg/00. 7,00 28,0 43,000 8,600 65, , St Steel DD Zinc-aluminium coated, double-dip Cover for 90 bend with pre-mounted sash locks. The cover can be used with fittings of all side heights. 63 B DFAAM 00 DD DFAAM DD DFAAM 200 DD DFAAM 300 DD DFAAM 400 DD DFAAM 0 DD DFAAM 600 DD Width Plate thickness mm mm Cover for Magic add-on tee kg/00. 9,700 2,00 4,0 9,0 30,300 36,0 42, St Steel DD Zinc-aluminium coated, double-dip Cover for add-on tee with pre-mounted sash locks. The cover can be used with fittings of all side heights. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 B+00 B B DFTM 00 DD DFTM DD DFTM 200 DD DFTM 300 DD DFTM 400 DD DFTM 0 DD DFTM 600 DD Width Plate thickness mm mm Cover for Magic T branch piece kg/00. 29,600 38,900 58,300 09,200 28,900 32, , St Steel DD Zinc-aluminium coated, double-dip Cover for tee with pre-mounted sash locks. The cover can be used with fittings of all side heights. Cable routing LPA OBO 8

82 L x H ertical ladder systems Medium duty vertical ladder Width Length SLL 620 CPS 4 FT SLL 630 CPS 4 FT SLL 640 CPS 4 FT SLL 6 CPS 4 FT SLL 660 CPS 4 FT mm mm kg/00 m 286,300 34,000 34, , , St Steel FT Hot-dip galvanised /m ertical ladder with a side height of 60 mm with riveted C profile rungs, open in upwards direction. Standard DIN DE must be considered when routing the cables and wires. Fastening takes place directly on the wall or using the wall brackets, type WB 30/75. The slot dimension of the rung is 8 mm and the appropriate U clamp is type 2056U. Heavy-duty vertical ladder Width Length SLM C40 2 FT SLM C40 3 FT SLM C40 4 FT SLM C40 5 FT SLM C40 6 FT mm mm kg/00 m 580,000 65, , , , St Steel FT Hot-dip galvanised /m ertical ladder with a side height of mm with riveted C profile rungs, open in upwards direction. Standard DIN DE must be considered when routing the cables and wires. The ladder is shipped in an unmounted state. The appropriate U clamp is type 2056U. Cable routing Clamp clip, single, metal pressure trough 2056U M 2 FT 2056U M 6 FT 2056U M 22 FT 2056U M 28 FT 2056U M 34 FT 2056U M 40 FT 2056U M 46 FT 2056U M 52 FT 2056U M 58 FT 2056U M 64 FT 2056U M 70 FT 2056U M 76 FT Clamping range D mm kg/00. 3,300 3,520 3,960 5,890 7,6 8,360 0,890,660 4,740 5,730 8,200 20, St Steel FT Hot-dip galvanised /00 pc. Suitable for all C profile rails with slot width 8 and 22 mm. Also suitable for flat, angle and U irons of 4-2 mm material thickness. Clip, bolt and pressure trough made of hot-dip galvanised steel ,5 A 4 G C 7,5 SW 0 B t 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

83 Mounting systems B x DBLG 20 0 FT DBLG FT DBLG 20 FT DBLG FT DBLG FT DBLG FT DBLG 20 0 FT DBLG FT B mm Stand-off bracket kg/00. 0,700 4,300 8,00 2,700 38,800 48,600 59,200 69, St Steel FT Hot-dip galvanised Stand-off bracket for stand-off of mesh cable trays on the floor or on the wall. Screwless fastening of the mesh cable tray on the stand-off bracket. US 3 K 20 FT US 3 K 30 FT US 3 K 40 FT US 3 K FT US 3 K 60 FT US 3 K 70 FT US 3 K 80 FT US 3 K 90 FT US 3 K 00 FT US 3 K 0 FT US 3 K 20 FT Length Material Tensile thickness load mm mm kn US 3 support kg/00.,0 64,400 78,300 92,300 06,200 20,200 34,00 47,800 62,000 75,900 89, St Steel FT Hot-dip galvanised Suspended support (U profile) of dimensions x 30 mm with welded head plate. For fastening to horizontal concrete ceilings and steel girders. For bracket widths of 400 mm or more, or if the bracket is mounted at the end of a suspended support, we recommend the use of the spacer, type DSK. Colour Protective cap US 3 KS OR Pastel orange 20 kg/00., PE Polyethylene Protective cap to cover the ends of US 3 supports. US 5 support Length 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 US 5 K 20 FT US 5 K 30 FT US 5 K 40 FT US 5 K FT US 5 K 60 FT US 5 K 70 FT US 5 K 80 FT US 5 K 90 FT US 5 K 00 FT US 5 K 0 FT US 5 K 20 FT mm kg/00. 85,000 0,000 36,000 6,000 85,000 20, ,000 26, ,000 3, , St Steel FT Hot-dip galvanised U support of dimensions x mm with welded head plate. For fastening to horizontal concrete ceilings and steel girders. For bracket widths of 400 mm or more, or if the bracket is mounted at the end of a suspended support, we recommend the use of the spacer, type DSK 45. US 5 KS OR Pastel orange PE Polyethylene Colour Protective cap to cover the ends of US 5 supports. Protective cap kg/00. 20, Cable routing LPA OBO 83

84 Mounting systems Wall and support bracket AW 5 AW 5 FT AW 5 6 FT AW 5 2 FT AW 5 3 FT AW 5 4 FT AW 5 5 FT AW 5 56 FT AW 5 6 FT Width H A Hole- Ø F in kn mm mm mm mm kn kg/00. 4,000 2,000 26,000 32,0 55,000 72,000 77,000 85, St Steel FT Hot-dip galvanised Light-duty wall and support bracket with welded head plate. Fastening of the bracket to the U support of width 400 mm or greater using hexagonal bolt through both sides of the support. Please insert suitable spacers. Wall and support bracket AWG 5 AW G 5 FT AW G 5 6 FT AW G 5 2 FT AW G 5 3 FT AW G 5 4 FT AW G 5 5 FT AW G 5 6 FT Width H A Hole- Ø F in kn mm mm mm mm kn kg/00. 4,000 20,000 26,000 35,000 56,000 69,000 84, St Steel FT Hot-dip galvanised Light-duty wall and support bracket with welded head plate for screwless mesh cable tray fastening. Fastening of the bracket to the U support of width 400 mm or greater using hexagonal bolt through both sides of the support. Please insert suitable spacers. Cable routing Wall and support bracket AW 30 AW 30 FT AW 30 6 FT AW 30 2 FT AW 30 3 FT AW 30 4 FT AW 30 5 FT AW FT AW 30 6 FT AW 30 7 FT Width H A Hole- Ø F in kn mm mm mm mm kn kg/00. 22,000 34,000 42,000 63,000 89,000 32,0 85,000 58,000 24, St Steel FT Hot-dip galvanised Medium-duty wall and support bracket with welded head plate. Fastening of the bracket to the U support of width 400 mm or greater using hexagonal bolt through both sides of the support. Please insert suitable spacers. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

85 Wall and ceiling trunking Trunking, type WDKH Colour Length mm WDKH-20020RW Pure white 2000 WDKH-20020CW Cream 2000 WDKH-20020LGR Light grey 2000 m kg/00 m 8,800 8,800 8, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Trunking cover and base with base perforation made of halogen-free plastic. During installation, ensure that only halogen-free accessories and fastening materials are used. Colour Internal corner cover WDKH-I20020RW WDKH-I20020CW WDKH-I20020LGR Pure white Cream Light grey kg/00. 0,4 0,4 0,4 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of the halogen-free WDKH trunking Colour External corner cover WDKH-A20020RW WDKH-A20020CW WDKH-A20020LGR Pure white Cream Light grey kg/00. 0,520 0,520 0,520 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of the halogen-free WDKH trunking Colour Flat angle cover WDKH-F20020RW WDKH-F20020CW WDKH-F20020LGR Pure white Cream Light grey PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle cover for changing the direction of the halogen-free WDKH trunking kg/00. 0,440 0,440 0, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 WDKH-T20020RW WDKH-T20020CW WDKH-T20020LGR Colour Pure white Cream Light grey PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece cover for changing the direction of the halogen-free WDKH trunking. Colour Length mm WDKH-E20020RW Pure white.5 WDKH-E20020CW Cream.5 WDKH-E20020LGR Light grey.5 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for closing the WDKH trunking T piece cover kg/00. 0,520 0,520 0, End piece kg/00. 0,30 0,30 0, Cable routing LPA OBO 85

86 Wall and ceiling trunking Trunking, type WDKH Colour Length mm WDKH-30045RW Pure white 2000 WDKH-30045CW Cream 2000 WDKH-30045LGR Light grey 2000 m kg/00 m 24,900 24,900 24, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Trunking cover and base with base perforation made of halogen-free plastic. During installation, ensure that only halogen-free accessories and fastening materials are used Internal corner cover Colour WDKH-I30045RW WDKH-I30045CW WDKH-I30045LGR Pure white Cream Light grey kg/00.,600,600,600 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of the halogen-free WDKH trunking External corner cover Colour WDKH-A30045RW WDKH-A30045CW WDKH-A30045LGR Pure white Cream Light grey kg/00. 2,000 2,000 2,000 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of the halogen-free WDKH trunking Flat angle cover Colour WDKH-F30045RW WDKH-F30045CW WDKH-F30045LGR Pure white Cream Light grey PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle cover for changing the direction of the halogen-free WDKH trunking kg/00. 2,000 2,000 2, Cable routing T piece cover WDKH-T30045RW WDKH-T30045CW WDKH-T30045LGR Colour Pure white Cream Light grey kg/00. 2,400 2,400 2, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T piece cover for changing the direction (rising or falling exit) of the halogen-free WDKH trunking. End piece Colour Length mm WDKH-E30045RW Pure white 7 WDKH-E30045CW Cream 7 WDKH-E30045LGR Light grey 7 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for closing the WDKH trunking kg/00. 0,0 0,0 0, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

87 Wall and ceiling trunking Trunking, type WDKH Colour Length mm WDKH-40060RW Pure white 2000 WDKH-40060CW Cream 2000 WDKH-40060LGR Light grey 2000 m kg/00 m 44,000 44,000 44, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Trunking cover and base with base perforation made of halogen-free plastic including cover fixing devices. During installation, ensure that only halogen-free accessories and fastening materials are used. Colour Internal corner cover WDKH-I40060RW WDKH-I40060CW WDKH-I40060LGR Pure white Cream Light grey kg/00. 6,200 6,200 6,200 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of the halogen-free WDKH trunking Colour External corner cover WDKH-A40060RW WDKH-A40060CW WDKH-A40060LGR Pure white Cream Light grey kg/00. 7,000 7,000 7,000 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of the halogen-free WDKH trunking Colour Flat angle cover WDKH-F40060RW WDKH-F40060CW WDKH-F40060LGR Pure white Cream Light grey PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle cover for changing the direction of the halogen-free WDKH trunking kg/00. 5,00 5,00 5, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 WDKH-T40060RW WDKH-T40060CW WDKH-T40060LGR Colour Pure white Cream Light grey kg/00. 7,600 7,600 7,600 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T and intersection cover for changing the direction of the halogen-free WDKH trunking. Colour Length mm WDKH-E40060RW Pure white 27.5 WDKH-E40060CW Cream 27.5 WDKH-E40060LGR Light grey 27.5 T and intersection cover kg/00.,000,000,000 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for closing the halogen-free WDKH trunking at the ends of the trunking End piece Cable routing LPA OBO 87

88 Wall and ceiling trunking Trunking, type WDKH Colour Length mm WDKH-60090RW Pure white 2000 WDKH-60090CW Cream 2000 WDKH-60090LGR Light grey 2000 m kg/00 m 8,0 8,0 8, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Trunking cover and base with base perforation made of halogen-free plastic including cover fixing devices. During installation, ensure that only halogen-free accessories and fastening materials are used Internal corner cover Colour WDKH-I60090RW WDKH-I60090CW WDKH-I60090LGR Pure white Cream Light grey kg/00. 0,700 0,700 0,700 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of the halogen-free WDKH trunking External corner cover Colour WDKH-A60090RW WDKH-A60090CW WDKH-A60090LGR Pure white Cream Light grey kg/00. 0,700 0,700 0,700 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of the halogen-free WDKH trunking Flat angle cover Colour WDKH-F60090RW WDKH-F60090CW WDKH-F60090LGR Pure white Cream Light grey PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle cover for changing the direction of the halogen-free WDKH trunking kg/00. 7,00 7,00 7, Cable routing T and intersection cover WDKH-T60090RW WDKH-T60090CW WDKH-T60090LGR Colour Pure white Cream Light grey kg/00. 2,0 2,0 2,0 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T and intersection cover for changing the direction of the halogen-free WDKH trunking. End piece Colour Length mm WDKH-E60090RW Pure white 27.5 WDKH-E60090CW Cream 27.5 WDKH-E60090LGR Light grey kg/00.,240,240,240 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for closing the halogen-free WDKH trunking at the ends of the trunking LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

89 Wall and ceiling trunking Colour Length mm WDKH-600RW Pure white 2000 WDKH-600CW Cream 2000 WDKH-600LGR Light grey 2000 Trunking, type WDKH-600 m kg/00 m 95,900 95,900 95, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Trunking cover and base with base perforation made of halogen-free plastic including cover fixing devices. During installation, ensure that only halogen-free accessories and fastening materials are used. Colour Internal corner cover WDKH-I600RW WDKH-I600CW WDKH-I600LGR Pure white Cream Light grey kg/00.,000,000,000 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of the halogen-free WDKH trunking Colour External corner cover WDKH-A600RW WDKH-A600CW WDKH-A600LGR Pure white Cream Light grey kg/00.,200,200,200 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of the halogen-free WDKH trunking Colour Flat angle cover WDKH-F600RW WDKH-F600CW WDKH-F600LGR Pure white Cream Light grey PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle cover for changing the direction of the halogen-free WDKH trunking kg/00.,400,400, LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 WDKH-T600RW WDKH-T600CW WDKH-T600LGR Colour Pure white Cream Light grey kg/00. 2,000 2,000 2,000 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T and intersection cover for changing the direction of the halogen-free WDKH trunking. Colour Length mm WDKH-E600RW Pure white 27.5 WDKH-E600CW Cream 27.5 WDKH-E600LGR Light grey 27.5 T and intersection cover kg/00. 2,420 2,420 2,420 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for closing the halogen-free WDKH trunking at the ends of the trunking End piece Cable routing LPA OBO 89

90 Wall and ceiling trunking Trunking, type WDKH-60 Colour Length mm WDKH-60RW Pure white 2000 WDKH-60CW Cream 2000 WDKH-60LGR Light grey 2000 m kg/00 m 46,6 46,6 46, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Trunking cover and base with base perforation made of halogen-free plastic including cover fixing devices. During installation, ensure that only halogen-free accessories and fastening materials are used. 60,5 Internal corner cover Colour WDKH-I60RW WDKH-I60CW WDKH-I60LGR Pure white Cream Light grey kg/00. 2,300 2,300 2,300 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Internal corner cover for changing the direction of the halogen-free WDKH trunking External corner cover Colour WDKH-A60RW WDKH-A60CW WDKH-A60LGR Pure white Cream Light grey kg/00. 2,400 2,400 2,400 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene External corner cover for changing the direction of the halogen-free WDKH trunking Flat angle cover Colour WDKH-F60RW WDKH-F60CW WDKH-F60LGR Pure white Cream Light grey PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Flat angle cover for changing the direction of the halogen-free WDKH trunking kg/00. 9,000 9,000 9, Cable routing T and intersection cover WDKH-T60RW WDKH-T60CW WDKH-T60LGR Colour Pure white Cream Light grey kg/00. 2,800 2,800 2,800 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene T and intersection cover for changing the direction of the halogen-free WDKH trunking. End piece Colour Length mm WDKH-E60RW Pure white 27.5 WDKH-E60CW Cream 27.5 WDKH-E60LGR Light grey kg/00. 3,0 3,0 3,0 PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene End piece for closing the halogen-free WDKH trunking at the ends of the trunking LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

91 Wall and ceiling trunking Colour a mm WDKH-TW40GR Light grey 2000 Partition, halogen-free 40 m kg/00 m 60 3, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Colour a mm WDKH-TW60GR Light grey 2000 Partition, halogen-free 60 m kg/00 m 40 20, PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene /m Colour Length Cover width mm mm OTK H60 Pure white 24.8 OTK H90 Pure white 28.8 OTK H0 Pure white 0 OTK H Pure white PC/ABS Polycarbonate/Acrylonitrile-butadiene-styrene Cover clip for better and easier laying of lines in the WDK trunking. Cover clip, halogen-free kg/00. 0,400 0,900,200 2, /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Cable routing LPA OBO 9

92 h 7 H F h 7 H F Cable and pipe fastening systems, plastic Quick Clip E 2955 M M M 2955 M M M 2955 M M6 SW 2955 M20 SW 2955 M SW 2955 M32 SW 2955 M40 SW 2955 M SW 2955 M63 SW Nominal size Colour Shipping box M6 Light grey 200 M20 Light grey 200 M Light grey 200 M32 Light grey 600 M40 Light grey 600 M Light grey 300 M63 Light grey 240 M6 Jet black 200 M20 Jet black 200 M Jet black 200 M32 Jet black 600 M40 Jet black 600 M Jet black 300 M63 Jet black kg/00. 0,2 0,3 0,433 0,630 0,835,454 2,203 0,2 0,3 0,433 0,630 0,835,454 2, D C A B PP Polypropylene /00 pc. OBO Quick clip, type 2955/...: for all metric steel armoured pipes, as well as light-duty and heavy-duty metric insulation pipes. Suitable for mounting the OBO Quick pipe. Pipe centring aids allow optimal attachment of the pipe and automatically turn the clip into the correct position. Universal fastening option; can be arranged with the OBO Multi-quick and starquick clip. Slot for side alignment during mounting with wood screw or knock-in anchor. Size M6-M32 can be screwed onto an M6 thread. Recommended fastening spacing 60 cm, for max. extraction values F at a room temperature of 20 C, see the table. M Quick Clip, flame-resistant Nominal size Colour Shipping box 2955 F M6 STGR M6 Stone grey F M20 STGR M20 Stone grey F M STGR M Stone grey F M32 STGR M32 Stone grey F M40 STGR M40 Stone grey F M STGR M Stone grey F M63 STGR M63 Stone grey F M6 RW 2955 F M20 RW 2955 F M RW 2955 F M32 RW 2955 F M40 RW M6 Pure white 200 M20 Pure white 200 M Pure white 200 M32 Pure white 600 M40 Pure white kg/00. 0,2 0,3 0,433 0,630 0,835,454 2,203 0,2 0,3 0,433 0,630 0, E D C A B PP Polypropylene /00 pc. Cable routing OBO Quick clip, type 2955/...: for all metric steel armoured pipes, as well as light-duty and heavy-duty metric insulation pipes. Suitable for mounting the OBO Quick pipe. Pipe centring aids allow optimal attachment of the pipe and automatically turn the clip into the correct position. Universal fastening option; can be arranged with the OBO Multi-quick and starquick clip. Slot for side alignment during mounting with wood screw or knock-in anchor. Size M6-M32 can be screwed onto an M6 thread. Recommended fastening spacing 60 cm, for max. extraction values F at a room temperature of 20 C, see the table. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

93 starquick clip Colour Size A B mm mm SQ-0 LGR Light grey SQ-2 LGR Light grey SQ-5 LGR Light grey SQ-7 LGR Light grey SQ-20 LGR Light grey SQ- LGR Light grey SQ-28 LGR Light grey SQ-32 LGR Light grey SQ-36 LGR Light grey SQ-40 LGR Light grey SQ-47 LGR Light grey SQ-5 LGR Light grey SQ-59 LGR Light grey kg/00. 0,560 0,540 0,580 0,640 0,670 0,970,070,230,,70,980 2,2 3, PA Polyamide /00 pc. Can be arranged next to each other to size SQ-28. Break load: with bolt DIN 96; diameter 4.5 mm, minimum break load at 20. starquick clip SQ... a comprehensive programme of quality clips ideal for the use in outside areas such as parking garages, under bridges and on the exterior of steel structures. Climate conditions have no chance: the starquick clips are made from U and weather-resistant polyamide. The starquick clips are available in 3 different sizes with a clamping range of 0 65 mm, allowing a problem-free installation on different pipe systems. starquick is suitable for plastic and metal pipes, as well as electrical and sanitary installations. The clips can be installed on the wall and ceiling. Mounting is amazingly fast and uncomplicated, without the use of tools. Mounting of multiple pipes is also really easy: - By arranging the single clips. - By using the double bracket, allowing a firm hold and spacing by heavy loads. - A rail system allows for an open spacing and numbering of the clips. starquick is reliable and can support heavy loads. A patented safety system guarantees that the pipes stay where they are. The pipe is secure in the all around closed clip. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Cable routing H Cable and pipe fastening systems, plastic Fy B F x D A 0 F x ø8 ø3.5 starquick nut SQ M6 Colour Thread L h t mm mm mm Light grey M kg/00. 0, PC Polycarbonate /00 pc. The starquick nut was developed especially for the starquick clip. Simply push into the intended opening of the clip. The nut is captive in the clip. Suitable for M6 threads. LPA OBO 93

94 x Cable and pipe fastening systems, metal Cable and pipe spacer clip A GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP GTP 732 GTP GTP GTP Clamping range D Material thickness Bolt Shipping box mm mm 5-6 M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x M5 x kg/00.,60,30,360,460,480,530,590,620,730,780,840,920 2,840 3,040 3,20 3,280 3,490 3,600 3,840 3,990 4,040 4,60 4,960 5, M6 B D b t2 t St Steel GTP Electrogalvanised, transparently passivated /00 pc. With M6 thread. Cable and pipe spacer clip FT FT FT FT FT FT FT FT FT FT FT Clamping range D Hole size Material thickness Size Bolt Shipping box mm mm mm x 0.5 M 2 M5 x x 0.5 M 6 M5 x x 0.5 Pg M5 x x 0.5 M 20 M5 x x 0.5 Pg 6 M5 x x 0.5 M M5 x x 0.5 M 32 M5 x x 0.5 M 40 M5 x x 4.5 M M5 x x 4.5 Pg48 M5 x x 8 2 M 63 M5 x kg/00. 2,30 2,430 2,0 2,730 2,870 3,480 4,040 4,80 5,400 6,00 7, St Steel FT Hot-dip galvanised /00 pc. Bolt material: steel. * Size M6 not suitable for nail device. * Sizes M6 to PG6 not suitable for bolt-firing tool and nail device. Cable routing Cable and pipe spacer clip ALU ALU ALU ALU ALU ALU ALU ALU Clamping range D Hole size Material thickness Size Bolt Shipping box mm mm mm x 0.5 M6 M5 x x 0.5 Pg M5 x x 0.5 M20 M5 x x 0.5 M M5 x x 0.5 M32 M5 x x 0.5 M40 M5 x x 4.5 M M5 x x 8 2 M63 M5 x 8 60 Al Aluminium Bolt material: A * Size M6 not suitable for nail device. * Sizes M6 to PG6 not suitable for bolt-firing tool and nail device. 20 kg/00. 0,980,020,00,390,620,9 2,320 2, /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

95 Cable and pipe fastening systems, metal Fastening clip, medium-duty 5 8 mm For Ø Shipping box mm 05 5 G G G G G G G G G G G G G G kg/00. 0,3 0,385 0,48 0,428 0,468 0,560 0,632 0,672 0,683 0,70 0,744 0,753 0,764 0, St Steel G Electrogalvanised /00 pc. Single-lobe fastening clip for cables and pipes. Beading from size 20. Fastening clip, heavy-duty B A td For Ø Hole size Material Shipping thickness box mm mm mm FT x FT x FT x FT x FT 6.5 x FT x FT x FT x FT x FT x FT x FT x FT 6.5 x FT x kg/00. 2,260 2,446 2,662 2,988 6,770 5,208 7,469 8,700 8,460 0,20 0,760,800 9,0 0, St Steel FT Hot-dip galvanised /00 pc. Two lobe fastening clips for cables and pipes. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Cable routing 6.5 H b LPA OBO 95

96 Pipe systems M Quick Pipe Size Colour Length C mm 2953 M6 LGR M6 Light grey M20 LGR M20 Light grey M LGR M Light grey M32 LGR M32 Light grey 2000 m kg/00 m 7,000,0 6,000 2, PC Polyvinylchloride price/00 m Quick-Pipe combines the advantages of cable trunking and installation pipe into an intelligent system. This system allows tidy and safe surface-mounted installation of all kinds of cables on walls and ceilings. Quick pipe is available in four metric sizes: M6, M20, M and M32 and the stock length is 2 m. The system is DE-tested and achieves a protection rating of IP44. The Quick-Pipe can be used in the temperature range between - and +60 C and is resistant against impact energy of 5 J. The fittings are a component part of the system. The smallest shipped quantity is one shipping box. M D t M Connection sleeve Size Colour Shipping box 2953 M M6 LGR M6 Light grey 2953 M M20 LGR M20 Light grey M M LGR M Light grey M M32 LGR M32 Light grey kg/00. 0,90,020,30, L B PC Polyvinylchloride The Quick-Pipe connection sleeves are DE-tested and consist of two interconnectable half shells, which can be closed around the Quick-Pipe. M 90 bend Size Colour Shipping box 2953 B M6 LGR M6 Light grey B M20 LGR M20 Light grey 2953 B M LGR M Light grey 2953 B M32 LGR M32 Light grey kg/00.,80,900 2,020 2, L B L PC Polyvinylchloride The Quick-Pipe bends 90 are DE-tested and consist of two interconnectable half shells, which can be closed around the Quick-Pipe. Cable routing M T piece Size Colour Shipping box 2953 T M6 LGR M6 Light grey T M20 LGR M20 Light grey 2953 T M LGR M Light grey 2953 T M32 LGR M32 Light grey kg/00. 2,20 2,320 2,440 2, PC Polyvinylchloride The Quick-Pipe T pieces are DE-tested and consist of two interconnectable half shells, which can be closed around the Quick-Pipe. Quick pipe shears c a. 220 Cutting area mm SQ For exact, burr-free cutting of the Quick pipe of Ø 6-32 mm. kg/00. 40, B2 B L 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

97 Pipe systems Size L t mm mm S6W FT S20W FT SW FT S32W FT S40W FT SW FT S63W FT Metal pipe, without thread m kg/00 m 40,000 5,000 70,000 98,000 24,000 56,000 98, St Steel FT Hot-dip galvanised price/00 m Electrical installation pipe without threaded ends according to EN for mechanical protection of cables. With burr-free inner wall. Corrosion protection class 4 (high). Size L t mm mm S6W ALU S20W ALU SW ALU S32W ALU S40W ALU SW ALU S63W ALU m kg/00 m 5,067 9,34 26,34 33,834 45,800 57,700 88, Al Aluminium price/00 m Electrical installation pipe without threaded ends according to EN for mechanical protection of cables. With burr-free inner wall LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Size L t R mm mm mm SB6W FT SB20W FT SBW FT SB32W FT SB40W FT SBW FT SB63W FT mm mm mm SB6W ALU SB20W ALU SBW ALU SB32W ALU SB40W ALU SBW ALU SB63W ALU Metal pipe bend, without thread kg/00. 0,660 2,600 32,800 46,000 83,330 20, , St Steel FT Hot-dip galvanised /00 pc. Accessory part: 90 bend with moulded couplings, for electrical installation pipes according to EN With burr-free inner wall. Size Dimen- Dimen- L sion t sion R kg/00. 4,000 6,000 9,000 2,000 20,000 3,000 45, Al Aluminium Accessory part: 90 bend with moulded couplings, for electrical installation pipes according to EN With burr-free inner wall. Size L D t mm mm mm S6W FT S20W FT SW FT S32W FT S40W FT SW FT S63W FT Metal pipe connection sleeve, without thread 0 5 kg/00. 2,400 4,400 5,600 7,800 4,400 22,000 28, St Steel FT Hot-dip galvanised /00 pc. Accessory part: plug-in coupling for the connections between electrical installation pipes. With burr-free inner wall. Cable routing LPA OBO 97

98 Pipe systems Metal pipe connection sleeve, without thread Size L D t mm mm mm S6W ALU S20W ALU SW ALU S32W ALU S40W ALU SW ALU S63W ALU kg/00.,000,000 2,000 2,000 3,000 5,000 9, Al Aluminium Accessory part: plug-in coupling for the connections between electrical installation pipes. With burr-free inner wall. Metal pipe connection sleeve, IP67 Size A L D mm mm mm S20W 2A IP SW 2A IP S32W 2A IP S40W 2A IP SW 2A IP kg/00. 4,300 5,400 6,900 8,300 0, A Stainless steel, grade 304 /00 pc. Accessory piece: Plug-in coupling with burr-free internal wall, thanks to internal O rings with IP67 dust-proof and waterproof. The riveted locking springs to both sides also ensure equipotential bonding. Classification according to EN 6386-: L A D Metal pipe, with thread Size L t Thread mm mm SM6W FT M6x.5 SM20W FT M20x.5 SMW FT Mx.5 SM32W FT M32x.5 SM40W FT M40x.5 SMW FT Mx.5 SM63W FT M63x.5 m kg/00 m 54,000 79,000 99,000 30,000 64, , , St Steel FT Hot-dip galvanised price/00 m Cable routing Electrical installation pipe according to EN with threaded ends to EN for mechanical protection of cables. With burr-free inner wall. Corrosion protection class 4 (high). One coupling is already screwed onto each pipe. Size L t Thread mm mm SM6W ALU M6x.5 SM20W ALU M20x.5 SMW ALU Mx.5 SM32W ALU M32x.5 SM40W ALU M40x.5 SMW ALU Mx.5 SM63W ALU M63x.5 m kg/00 m 20,000 30,000 36,700,000 60,000 86,700 0, Al Aluminium Electrical installation pipe according to EN with threaded ends to EN for mechanical protection of cables. With burr-free inner wall. One coupling is already screwed onto each pipe. Metal pipe bend, with thread Size L t R Thread mm mm mm SBM6W FT M6x.5 SBM20W FT M20x.5 SBMW FT Mx.5 SBM32W FT M32x.5 SBM40W FT M40x.5 SBMW FT Mx.5 SBM63W FT M63x kg/00. 0,700 2,600 32,800 46,000 83,300 20, , St Steel FT Hot-dip galvanised /00 pc. Accessory part: 90 bend for electrical installation pipes according to EN with threaded ends to EN With burr-free inner wall. One coupling is already screwed onto each pipe bend. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

99 Pipe systems Size L t R Thread mm mm mm SBM6W ALU M6x.5 SBM20W ALU M20x.5 SBMW ALU Mx.5 SBM32W ALU M32x.5 SBM40W ALU M40x.5 SBMW ALU Mx.5 SBM63W ALU M63x.5 Metal pipe bend, with thread kg/00. 4,000 7,000 0,000 5,000 23,000 37,000 59,000 Al Aluminium Accessory part: 90 bend for electrical installation pipes according to EN with threaded ends to EN With burr-free inner wall. One coupling is already screwed onto each pipe bend. Size L D t Thread mm mm mm SM6W FT M6x.5 SM20W FT M20x.5 SMW FT Mx.5 SM32W FT M32x.5 SM40W FT M40x.5 SMW FT Mx.5 SM63W FT M63x.5 mm mm mm SM6W ALU M6x.5 SM20W ALU M20x.5 SMW ALU Mx.5 SM32W ALU M32x.5 SM40W ALU M40x.5 SMW ALU Mx.5 SM63W ALU M63x kg/00. 2,00 3,000 5,000 8,00,400 7,000 30, Metal pipe connection sleeve, with thread St Steel FT Hot-dip galvanised /00 pc. Accessory part: pipe connection sleeve with thread to DIN EN to connect electrical installation pipes and 90 bends. Size Dimen- Dimen- Thread L sion D sion t kg/00.,000,000 2,000 3,000 4,000 6,000 7, Al Aluminium Accessory part: pipe connection sleeve with thread to DIN EN to connect electrical installation pipes and 90 bends. Metal pipe end cap 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ M6 29 M20 29 M 29 M32 29 M40 29 M 29 M63 29 M6 SW 29 M20 SW 29 M SW 29 M32 SW 29 M40 SW 29 M SW 29 M63 SW Size Colour D D2 L mm mm mm M6 Light grey M20 Light grey M Light grey M32 Light grey M40 Light grey M Light grey M63 Light grey M6 Black M20 Black M Black M32 Black M40 Black M Black M63 Black PE Polyethylene Pipe end cap to slot onto electrical installation pipes, metric kg/00. 0,235 0,326 0,64,070,444 2,76 2,808 0,235 0,326 0,64,070,444 2,76 2, /00 pc. Cable routing LPA OBO 99

100 Pipe systems Pipe end cap, splittable 29 TB M6 29 TB M20 29 TB M 29 TB M32 29 TB M40 29 TB M 29 TB M63 29 TB M6 SW 29 TB M20 SW 29 TB M SW 29 TB M32 SW 29 TB M40 SW 29 TB M SW 29 TB M63 SW Size Colour D D2 L mm mm mm M6 Light grey M20 Light grey M Light grey M32 Light grey M40 Light grey M Light grey M63 Light grey M6 Black M20 Black M Black M32 Black M40 Black M Black M63 Black kg/00. 0,487 0,492 0,576 0,695 0,843,22,358 0,487 0,492 0,576 0,695 0,843,22, D PE Polyethylene /00 pc. Separable pipe end cap to slot onto electrical installation pipes, metric. The splittable pipe end sleeve can be used for correct repair purposes on existing installations. It is not necessary to disconnect the cables, thus accelerating installation enormously. Cable routing 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 L2 D2 L 00 OBO LPA

101 Junction box systems ersion Entries Colour Shipping box T 60 Standard 7 x M Light grey 60 T 60 RW 7 x M Pure white 60 T 60 F 960 C flame-resistant 7 x M Light grey 60 T 60 RO-LGR With red cover 7 x M Red grey 60 T 60 KL With terminal strip 7 x M Light grey 60 Junction box T 60, plug-in seal kg/00. 2,300 2,300 2,300 2,300 6, PP Polypropylene /00 pc. All the T series junction boxes are U-resistant. The cable junction boxes are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EA). This plastic is soft, which means that it is malleable. This allows installation of cables through the 7 x M seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. Alternatively, instead of seals, cable glands can be inserted through the openings and be countered internally with a locknut. The junction boxes can be mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5. Clear internal dimensions: 00 x 00 x 48 mm Cover with labelling panel and lead-sealed. Standard version: flame-resistant, testing temperature 6 C. F version: highly flame-resistant, testing temperature 960 C. ersion Entries Colour Shipping box T 00 Standard 0 x M Light grey 40 T 00 RW 0 x M Pure white 40 T 00 F 960 C flame-resistant 0 x M Light grey 40 T 00 RO-LGR With red lid 0 x M Red grey 40 T 00 KL With terminal strip 0 x M Light grey 40 Junction box T 00, plug-in seal kg/00. 6,270 6,270 6,270 6,270 40, PP Polypropylene /00 pc. All the T series junction boxes are U-resistant. The cable junction boxes are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EA). This plastic is soft, which means that it is malleable. This allows installation of cables through the 0 x M seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. Alternatively, instead of seals, cable glands can be inserted through the openings and be countered internally with a locknut. The junction boxes can be mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5. Clear internal dimensions: 36 x 02 x 57 mm Cover with labelling panel and lead-sealed. Standard version: flame-resistant, testing temperature 6 C. F version: highly flame-resistant, testing temperature 960 C. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 ersion Entries Colour Shipping box T 60 7 x M Standard Light grey 5 x M32 20 T 60 RW 7 x M Pure white 5 x M32 20 T 60 F 7 x M 960 C flame-resistant Light grey 5 x M32 20 T 60 KL 7 x M With terminal strip Light grey 5 x M32 20 Junction box T 60, plug-in seal kg/00. 30,000 30,000 30,000 64, PP/GF Polypropylene, Glass-fibre reinforced /00 pc. All the T series junction boxes are U-resistant. The cable junction boxes are made of a thermoplastic polypropylene plastic with plug-in seals made of ethylene vinyl acetate (EA). This plastic is soft, which means that it is malleable. This allows installation of cables through the 7x M + 5x M32 seals, or the seals can be cut with a knife at the pre-marked points, in order to create an insertion opening for cables or pipes. Alternatively, instead of seals, cable glands can be inserted through the openings and be countered internally with a locknut. The junction boxes can be mounted on mounting plates in the openings on the floor using steel bolts 3.5 x 9.5. Clear internal dimensions: 76 x 35 x 67 mm Cover with labelling panel and lead-sealed. Standard version: flame-resistant, testing temperature 6 C. F version: highly flame-resistant, testing temperature 960 C. Cable routing LPA OBO 0

102 Junction box systems Junction box T 60, transparent elevated lid Entries Colour Shipping box T 60 HD TR 7xM Light grey 6 PP/PC Polypropylene / polycarbonate kg/00. 7, /00 pc. The junction boxes consist of thermoplastic material. The bottom parts are made from impactresistant polypropylene, the box cover is made from extremely hard-wearing, impact-resistant polycarbonate. The high IK 0 impact resistance at -5 C shows this also. Thanks to the elevated cover, OBO creates significantly more wiring space, therefore offering the facility to install and protect pushbuttons and series terminals, as well as the option to accommodate control sensors, switches and electronic equipment from the housing and installation technology area. Together with the fastening plate, it is an ideal partner in visible installations. Box cover transparent. Cable box with membrane insertion and hat profile rail flame resistant to DE 047/DIN 695 Part 2-, test temperature 6 C Junction box T 00, transparent elevated lid Entries Colour Shipping box T 00 HD TR 0xM Light grey 0 PP/PC Polypropylene / polycarbonate kg/00. 22, /00 pc. The junction boxes consist of thermoplastic material. The bottom parts are made from impactresistant polypropylene, the box cover is made from extremely hard-wearing, impact-resistant polycarbonate. The high IK 0 impact resistance at -5 C shows this also. Thanks to the elevated cover, OBO creates significantly more wiring space, therefore offering the facility to install and protect pushbuttons and series terminals, as well as the option to accommodate control sensors, switches and electronic equipment from the housing and installation technology area. Together with the fastening plate, it is an ideal partner in visible installations. Box cover transparent. Cable box with membrane insertion and hat profile rail flame resistant to DE 047/DIN 695 Part 2-, test temperature 6 C Cable routing Junction box T 60, transparent elevated lid Entries Colour Shipping box T 60 HD TR 7xM+5xM32 Light grey 6 PP/PC Polypropylene / polycarbonate kg/00. 34, /00 pc. The junction boxes consist of thermoplastic material. The bottom parts are made from impactresistant polypropylene, the box cover is made from extremely hard-wearing, impact-resistant polycarbonate. The high IK 0 impact resistance at -5 C shows this also. Thanks to the elevated cover, OBO creates significantly more wiring space, therefore offering the facility to install and protect pushbuttons and series terminals, as well as the option to accommodate control sensors, switches and electronic equipment from the housing and installation technology area. Together with the fastening plate, it is an ideal partner in visible installations. Box cover transparent. Cable box with membrane insertion and hat profile rail flame resistant to DE 047/DIN 695 Part 2-, test temperature 6 C Plug-in seal for pipes, T series Size For Ø Colour Shipping box mm EDR 6-20 LGR M 6 & 20 Light grey EDR 20- LGR M 20 & Light grey EDR LGR M32 20 & Light grey EDR LGR M32 & 32 Light grey EDR LGR M40 32 & 40 Light grey PC Polyvinylchloride Plug-in seal for junction boxes kg/00. 0,520 0,680,020,70 2, /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

103 Junction box systems B 9 T M 5 B 9 T M Accessories Colour Shipping box terminal strip Light grey 40 Light grey 40 Junction box B 9/T with perforation membrane 5 5 kg/00. 7,0 3, PP Polypropylene /00 pc. The wet-room junction box comprises two halogen-free plastic components, 7 threaded entries (M20 x.5), additional entry in base with perforation membrane (for cable diameter up to 5 mm). Where cable glands are used (giving additional strain relief) there is no need to remove the membrane (this saves time). Protection IP67 with cable gland and for the perforation membrane. Rated voltage 400 ; nominal cross-section 4-6 mm². The lid is sealed with 4 pre-fitted rapid fastenings (80 ). The fastening holes are additionally moulded with a soft plastic component for bolt ø 5 mm (spacing 75 mm). 2 fastening bolt caps and fastening bolt. Clear internal dimensions: 98 x 98 x 40 mm M Contents AQUASIT cartridge KM ml 2 kg/00. 42, Aquasit is a two-component casting compound in a cartridge, for applications in areas with continuous and extremely high levels of moisture. It can also be used against mechanical shock and vibrations. The cartridge is suitable for use in standard cartridge pistols. At room temperature, the unopened aluminium packaging can be stored for up to 8 months. When the cartridge is opened, the material should be used within 24 hours. Practical experience, tests and approvals valid only in conjunction with OBO junction boxes. Aquasit properties: Protection rating with appropriate junction box: IP68 at.8 bar/000 hrs Rated voltage: 400 Penetration resistance: >20 kv/mm to DE 029 Part 2 Operating temperature: -40 to +90 C Processing temperature: 0 to +40 C Halogen-free, silicon-free, isocyanate-free Environmentally friendly and without the need to be labelled Aquasit mixer pipe KM-M PU kg/00 PUs 7,000 0 mixer pipes in the set. Simple, automatic mixing of OBO AQUASIT when pressing out the compound from the cartridge /PE 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 KM-P AQUASIT cartridge pistol kg/ , High-quality one-component cartridge pistol for use with the AQUASIT cold casting compound. The cartridge pistol can also be used with normal 300 ml cartridges. MP UNI FS Height Width mm mm 5 70 Mounting plate, for fastening on the side rail of cable support systems. Please order the truss-head bolt, type FRSB 6 x 2, separately. Mounting plate, T series kg/ , St Steel FS Strip-galvanised Cable routing LPA OBO 03

104 Junction box systems Mounting plate, T series Height Width MP WI KL. FS mm mm kg/ , MP WI KL. DD , St Steel FS Strip-galvanised DD Zinc-aluminium coated, double-dip Angled mounting plate, for fastening on the side rail of the cable tray. Please order the truss-head bolt, type FRS B6 x 2, separately. MPG 65 FT A B x y mm mm mm mm Mounting plate for screwless fastening on mesh cable trays. kg/ , St Steel FT Hot-dip galvanised Fastening element for mesh cable tray BE TS GR Shipping box 0 PC Polycarbonate kg/ , /00 pc. The fastening element BE TS GR can be used to attach OBO junction boxes, type T60 and T00, to all standard mesh cable trays quickly and in a few actions. This is all done without using tools. This keeps the junction box securely in position. However, it can be quickly dismantled as necessary. Fastening element for cable tray BE TS KR Shipping box 0 PC Polycarbonate kg/ , /00 pc. The fastening element BE TS KR can be used to attach OBO junction boxes, type T60 and T00, to all standard cable trays in a few actions, quickly and without tools. This keeps the junction box securely in position. However, it can be quickly dismantled as necessary. This is all done without using tools. Cable routing Fastening pin T-S MST Shipping box 0000 kg/ , St Steel G Electrogalvanised /00 pc. Hat profile rail 2069 T3 GTP 2069 T60 GTP Material Length thickness ersion mm mm 245 For T 3 lengthwise 57 For T 60 lengthwise + T 2, T3 crosswise 0 0 kg/00. 8,4 5, St Steel GTP Electrogalvanised, transparently passivated /00 pc. Hat profile rail 35 x 7.5 mm to DIN EN 6075 (formerly DIN EN 022). 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

105 L Cable gland systems, plastic D Cable gland, metric thread L2 G E SW L Thread Colour Shipping box -TEC M2 LGR M2 x.5 Light grey 0 -TEC M6 LGR M6 x.5 Light grey 0 -TEC M20 LGR M20 x.5 Light grey 600 -TEC M LGR M x.5 Light grey 300 -TEC M32 LGR M32 x.5 Light grey 240 -TEC M40 LGR M40 x.5 Light grey 20 -TEC M LGR M x.5 Light grey 60 -TEC M63 LGR M63 x.5 Light grey 60 -TEC M2 SW -TEC M6 SW -TEC M20 SW -TEC M SW -TEC M32 SW -TEC M40 SW -TEC M SW -TEC M63 SW M2 x.5 Black 0 M6 x.5 Black 0 M20 x.5 Black 600 M x.5 Black 300 M32 x.5 Black 240 M40 x.5 Black 20 M x.5 Black 60 M63 x.5 Black kg/00. 0,38 0,638 0,856,360 2,230 3,467 5,466 8,306 0,38 0,638 0,856,360 2,230 3,467 5,466 8, PA Polyamide /00 pc. The quickest and most convenient way of providing strain relief and tightness with cable glands on junction boxes and housings is with the tried-and-trusted -TEC M cable glands from OBO. With the integrated sealing lip and the special OBO lamella technology protection class IP68 is achieved. Strain relief and tightness have been tested to DIN EN 262. The connecting threads are metric and are therefore suitable for universal use. Once screwed in place the fitting is there for ever as the optimum thread adjustment with the right pitch ensures permanent resistance to shaking. Applications: from private housing with junction boxes up to industrial applications in the distributor cabinet. Temperature range: 20 C to +65 C Ratchet set Accessories -TEC RA SET ground ratchet grip for ground ratchet 4 socket spanner attachments kg/00. 7, Set consisting of a ground ratchet, type -TEC RA, a grip for ground ratchet, type -TEC GR, and four socket spanner attachments in sizes WAF 5, WAF 20, WAF 24 and WAF 29. Multiple sealing insert, metric 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 D2 D H Size D H D Number of drill holes Shipping box mm mm mm mm 07 C M 20 2x4 M C M 20 4x5 M C M 20 2x6 M C M 5x4 M C M 3x6 M C M 2x6 M C M 3x7 M C M 2x8 M C M 32 2x8 M C M 32 4x8 M kg/00. 0,30 0,080 0,00 0,80 0,20 0,260 0,80 0,200 0,530 0, NBR-SBR Rubber mixture /00 pc. Use to insert multiple thin cables in the -TEC M cable glands, is replaced with the simple sealing ring of the cable gland. Size Sealing range D D Dimen- Shipping D2 sion H box mm mm mm mm mm 07CR M 2 M CR M 6 M CR M 20 M CR M M CR M 32 M CR M 40 M CR M M CR M 63 M NBR-SBR Rubber mixture Reduces the sealing area D of the cable gland -TEC M and -TEC M L. Reducing seal insert, metric kg/00. 0,0 0,5 0,205 0,340 0,6,40 2,080 3, /00 pc. Cable routing LPA OBO 05

106 L Cable gland systems, plastic Screw plug, metric Size Colour Shipping box 07S M 5 PA For M2 / Pg9 Light grey S M 9 PA For M6 / Pg3.5 Light grey 7 07S M 2 PA For M20 / Pg6 Light grey 0 07S M 6 PA For M / Pg2 Light grey 0 07S M 20 PA For M32 / Pg29 Light grey 300 kg/00. 0,04 0,090 0,30 0,90 0, PA Polyamide /00 pc. Screw plug for dust-proof and waterproof closure of installed but (as yet) unfilled -TEC... cable glands. Screw plug D Colour Shipping box Thread D L mm mm 08 M2 PS Light grey 3000 M2 x M6 PS Light grey 800 M6 x M20 PS Light grey 200 M20 x M PS Light grey 000 M x M32 PS Light grey 0 M32 x M40 PS Light grey 300 M40 x M PS Light grey 300 M x M63 PS Light grey 300 M63 x kg/00. 0,46 0,6 0,209 0,355 0,352,280,400, G PS Polystyrene /00 pc. Screw plug in accordance with DIN 46320, with metric thread to IEC 423. Locknut, metric thread Thread Colour Shipping box 6 M2 LGR PA M2x.5 Light grey M6 LGR PA M6x.5 Light grey M20 LGR PA M20x.5 Light grey M LGR PA Mx.5 Light grey M32 LGR PA M32x.5 Light grey 0 6 M40 LGR PA M40x.5 Light grey 2 6 M LGR PA Mx.5 Light grey 2 6 M63 LGR PA M63x.5 Light grey M2 SW PA 6 M6 SW PA 6 M20 SW PA 6 M SW PA 6 M32 SW PA 6 M40 SW PA 6 M SW PA 6 M63 SW PA M2x.5 Black 2000 M6x.5 Black 000 M20x.5 Black 200 Mx.5 Black 000 M32x.5 Black 0 M40x.5 Black 2 Mx.5 Black 2 M63x.5 Black kg/00. 0,00 0,60 0,94 0,297 0,60,683 0,890,830 0,00 0,60 0,94 0,297 0,60,683,756, PA Polyamide /00 pc. Cable routing Locknut DIN 4639, with metric thread IEC 423. Separable cable gland, sealing insert closed Thread -TEC TB Mx.5 PC Polycarbonate Sealing range D Colour mm Light grey kg/ , The -TEC TB.. ensures - like all -TEC glands - a secure sealing of the cable. The fact that the cable gland is separable means that it is easy and quick to install, for instance, pre-terminated cables. A further benefit is the option of retrofitting cables in existing installations. It is also unbeatable as a "repair gland", there is no need of disassembling pre-mounted cables, it can be installed without interrupting the production process. The closed sealing insert provides the option to universally drill the required sealing diameter(s). The ideal aiding tools are the spreading pliers which can be used to open the sealing insert. Placing the individual cables becomes easy and quick. 9 SW Mx,5 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

107 Cable gland systems, plastic Separable cable gland, sealing insert, cable Mx,5 -TEC TB TEC TB TEC TB -5 -TEC TB 4-8 -TEC TB 7-20 Thread Sealing range D Colour mm Mx Light grey Mx Light grey Mx Light grey Mx Light grey Mx Light grey kg/00. 2,900 3,0 2,980 2, 2, D PC Polycarbonate SW35 The -TEC TB.. ensures - like all -TEC glands - a secure sealing of the cable. The fact that the cable gland is separable means that it is easy and quick to install, for instance, pre-terminated cables. A further benefit is the option of retrofitting cables in existing installations. It is also unbeatable as a "repair gland", there is no need of disassembling pre-mounted cables, it can be installed without interrupting the production process. The various sealing inserts provide the option to seal cables of 7 to 20.5 mm depending on the selected sealing insert. The ideal tools are the spreading pliers which can be used to open the sealing insert. Placing the individual cables becomes easy and quick. Separable cable gland, sealing insert, multiple 9 0 Mx,5 39 Thread Colour Shipping box -TEC TB 3x9 Mx.5 Light grey -TEC TB 4x8 Mx.5 Light grey PC Polycarbonate LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 Cable routing kg/00. 2,640 2, D SW35 The -TEC TB.. ensures - like all -TEC glands - a secure sealing of the cable. The fact that the cable gland is separable means that it is easy and quick to install, for instance, pre-terminated cables. A further benefit is the option of retrofitting cables in existing installations. It is also unbeatable as a "repair gland", there is no need of disassembling pre-mounted cables, it can be installed without interrupting the production process. Further multiple sealing inserts upon request. When using a multiple sealing insert, several cables/wires can be led and sealed through a gland. Not required drill holes have to be closed with a plug. The ideal aiding tools are the spreading pliers which can be used to open the sealing insert. Placing the individual cables becomes easy and quick. Colour Spreading pliers for sealing insert -TEC TBZ The ideal tools are the spreading pliers which can be used to open the sealing insert. Placing the individual cables becomes easy and quick. Place the cable into the spreading pliers, insert the spreading pliers into the sealing separation and then open them. Now the cable can easily be placed into the sealing. LPA OBO 07

108 Cable tie and clip for 8 mm groove Cable ties Max. Minimum bundle Ø breaking load Colour mm mm kn x00 SWU 2.5 x Black x SWU 3.6 x Black x200 SWU 3.6 x Black x200 SWU 4.8 x Black x30 SWU 4.8 x Black x370 SWU 4.8 x Black x380 SWU 7.6 x Black PA Polyamide For quick fixing. Strip clip 6 mm Max. Minimum bundle Ø breaking load Colour Shipping box mm mm kn 5 6X80 SW 6 x Black 0 5 6X290 SW 6 x Black X360 SW 6 x Black X80 SW 9 x Black 000 PA Polyamide Design E, single lock, U and weather-resistant. Strip clip 9 mm Max. Minimum bundle Ø breaking load Colour Shipping box mm mm kn 5 9X265 SW 9 x Black X360 SW 9 x Black X SW 9 x Black X760 SW 9 x Black 00 PA Polyamide Design D, double lock, U and weather-resistant kg/00. 0,035 0,07 0,09 0,5 0,236 0,606 0,606 kg/00. 0,80 0,300 0,380 0,270 kg/00. 0,420 0,560 0,930, /00 pc /00 pc /00 pc. CLIP cable tie with hammer head Colour mm 935 CKB4,5NUT8 39 x 6 x 20 Black PA Polyamide kg/ , /00 pc. chamber, individual hammer, for cable fastening without additional cable ties, closable; mounting in a groove with a quarter-turn. For profiles / frames with 8 mm groove. (P frames) Cable routing Capacity: 2x2 mm Colour mm 934 CKB4,5NUT8 40 x 6 x 20 Black PA Polyamide kg/ ,700 2 chambers, individual hammer, for cable fastening without additional cable ties, closable; mounting in a groove with a quarter-turn. For profiles / frames with 8 mm groove. (P technology) Capacity: 2 mm each /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ OBO LPA

109 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 LPA OBO 09

110 0 OBO LPA 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205

111 Constructional fire protection Fire protection duct 2 Waterproof bandage 3 Insulation: HSM mortar ballast 4 Insulation: Pyrosit fire protection foam 4 Pipe sleeve 5 Plugs 5 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 LPA OBO

112 Fire protection duct PYROLINE Sun P Fire protection duct PYROLINE Sun P BSKP 0406 h b H B Length mm mm mm mm mm kg/00 m 480, Concrete /m Fire protection duct for fireproof routing of photovoltaic cables inside and outside of buildings. Consists of non-conductive, frost-resistant fibre glass lightweight concrete and fulfils the requirements for the contact protection of rescue services in case of fire. Tested and approved to DIN 402 Part, as an I30 duct, may therefore be used in emergency and escape routes. Including lid screws and 3 m of sealing strip. Sealing strip Length mm mm BSKP-D x Foam Self-adhesive sealing strip for BSKP 0406 Connector set kg/00. 6, BSKP kg/00. 22, St Steel FS Strip-galvanised Connection shackle for use of the fire protection duct BSKP 0406, as suspended variant. The set contains 2 connectors and the appropriate quantity of fastening and connection screws. Fastening clip, light-duty For Ø Shipping box mm G G G G G G G kg/00. 0,067 0,084 0,099 0,20 0,23 0,39 0, St Steel G Electrogalvanised /00 pc. Single-lobe fastening clip for cables and pipes. * Sizes 3 and 4 not suitable for nail device. * Sizes 3 to 2 not suitable for bolt-firing tool. Bolt Constructional fire protection BSKP-S6 5x6 kg/ , St Steel GTP Electrogalvanised, transparently passivated /00 pc. Bolt with special milled ribs for universal fastening of cable clips, connector elements and separating retainers in fibre glass lightweight concrete of the BSK fire protection ducts. Identification plate KS-BSKP DE PC Polyvinylchloride kg/00. 2, Information panel to label the fire protection duct as a photovoltaic duct according to the DE application rule. Incl. two push-fit anchors. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 2 OBO LPA

113 Weatherproof bandage PYROWRAP Wet Length Width Bandage set for photovoltaics FSB-K32 FSB-K82 mm mm kg/00. 96,000 23, Intumescent material Complete set for covering cable bundles or cable support systems without lid to prevent fire spreading. Application in outdoor areas. Each of the sets contains 4 sections of the weather-resistant cable bandage FSB-WB, 8 metal strip clips and an identification plate. Sufficient for approx. 2 m length. data: sections of the bandage FSB-WB Scope of the surrounding cable support systems: FSB-K32 maximum 320 mm FSB-K82 maximum 820 mm (including min. 5 cm bandage overlap) Length Fire protection cover, weatherproof mm FSB-WB kg/ , Weatherproof fire protection jacketing made of flexible mesh with fire protection coating to prevent fire spreading via cables and cable support systems. External side grey, internal side red. One roll contains 22 m². Length Ribbon clip 7 mm MBS 05 MBS 030 MBS 045 MBS 06 mm kg/00. 0,230 0,399 0,602 0, A Stainless steel, grade 304 /00 pc. Metal ribbon clip in ladder form with single lock, 7 mm wide in various fixed lengths. For hightemperature and weatherproof fixing. Length Ribbon clip 2 mm MBS 075 MBS 00 MBS 20 MBS mm kg/00. 2,300 3,000 3,600 4, A Stainless steel, grade 304 /00 pc. 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ Ø 7 70 Metal ribbon clip in ladder form with single lock, 2 mm wide in various fixed lengths. For hightemperature and weatherproof fixing. MBS-Z St Steel Spring chuck for metal strip clips High-quality spring chuck with cutting tool for metal strip clips, type MBS. KS-FSB DE PC Polyvinylchloride kg/00. 55,0 kg/00. 2, Identification plate for cable bandage Constructional fire protection LPA OBO 3

114 Insulation: PYROMIX mortar insulation and PYROSIT NG fire protection foam Dry mortar in bucket MSX-E Contents kg 0 Special mortar kg/ , Mortar to create cable and combination insulation in solid walls and ceilings. Suitable for pumping, pressing and for manual installation. Adding approx. 3 litres of water to 0 kg of dry mortar produces about 0 litres of workable compound. In dry, frost-free rooms, the dry mortar can be stored for at least 2 months in closed original container. Insulation layer creator in a cartridge Contents DSX-K ml 300 Intumescent material kg/00., Dispersion-based fire protection compound for interior areas, to fill residual joints and close openings. Approved material for closing core drill holes for individual cable glands. Material class DIN B2, normally flammable. In dry, frost-free rooms, the compound can be stored at temperatures from +5 C to + C for up to 8 months in closed, upright original container. 2-component fire protection foam Contents FBS-S ml 380 kg/00. 64, PYROSIT NG 2-component fire protection foam in a cartridge, including 2 mixer pipes. To create cable and combination insulation; always process with the cartridge pistols FBS-PH or FBS-PA. In dry, frost-free rooms, the cartridge can be stored closed and standing upright at temperatures from +5 C to +30 C for up to 2 months. Professional cartridge pistol FBS-PH kg/ , High-quality 2-component cartridge pistol for use with the PYROSIT NG fire protection foam. The parallel movement of the outlet to the holding grip ensures easy working. Mixer pipe set Constructional fire protection FBS-M PU kg/00 PUs 0,000 0 mixing tubes and 5 extension tubes in the set for PYROSIT NG fire protection foam. Language KS-S DE German PC Polyvinylchloride kg/00. 2, Universal identification plate 00 /PE Universal identification plate to be written on for all OBO insulation. For approved identification, including two push-fit anchors. 85 Ø LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205 4 OBO LPA

115 Insulation: PYROCOMB Intube and PYROPLUG foam series CTS- CTS-300 Diameter Length For opening mm mm Ø mm Pipe shell PYROCOMB Intube kg/00. 35,200 70, PC Polyvinylchloride Internally coated pipe shells with click lock. The inner space can be fitted with cables and electrical installation pipes completely. Approved in Europe with ETA-3/0904. Fire resistance classes to EI20. Closing with 2 foam plugs included in the delivery. The surface seal is created with the ASX coating. In some applications, the use of metallic tightening strips is prescribed to secure the pipe shells in light-duty partitions. Details can be found in the mounting instructions/approval. Contents Ablation coating in a cartridge ASX-K ml 30 Intumescent material kg/00., Combined, endothermic and weatherproof coating for internal and external areas. Universal protection coating for cable and cable support structures. Use as direct filler, and as paint when stirred. Material class DIN B2, normally flammable. In dry, frost-free rooms, the coating can be stored at temperatures from +5 C to + C for up to 8 months in closed, upright original containers. FBA-S07 FBA-S65 FBA-S78 FBA-S22 FBA-S34 FBA-S65 FBA-S200 FBA-S2 For Dimen- opening D sion d Ø mm mm mm kg/00. 9,000 8,000,000 23,00 28,600 43,200 67,000 86,0 Permanently elastic, closed-pore foam Plug for cable insulation Protect the FBA plugs against water in order to guarantee safe foaming in case of fire. FBA-S plug Contents PYROPLUG Screed filler FBA-SP ml 30 kg/00. 46, Intumescent material 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/ Ø 7 70 Fire protection filler in a cartridge Usable as small insulation and as joint closing compound in all insulation of the PYROPLUG series. In dry, frost-free rooms, the fire protection filler can be stored for up to 2 months at a temperature of +5 C to +30 C. Language KS-S DE German PC Polyvinylchloride Universal identification plate kg/00. 2, Universal identification plate to be written on for all OBO insulation. For approved identification, including two push-fit anchors. Constructional fire protection LPA OBO 5

116 6 OBO LPA 2 LPA Lösungskatalog Photovoltaik 204 / en / 03/03/205 (LLExport_04228) / 03/03/205