Searle Air Cooled Condensers. GEA Refrigeration. Searle

Transcription

1 Searle ir ooled ondensers GE Refrigeration Searle

2 Searle ir ooled ondensers Range benefits eeting your specification - Our range has literally 1000s of models, created through a modular design and variety of fan sizes, offering a greater choice to match your requirements. ssured performance - ll our condensers are Eurovent ertified, enabling you to rest easy, with the knowledge that our unit will perform as specified. odels Eurovent No. Fans Designed to be quiet - designed restrictions using the latest 6, 8 & 1 pole fansets. In addition, we offer E technology across the standard range which offers variable speed control and high efficiency. D efficient - Due to rising energy costs, efficiency is becoming a key industry issue and is increasingly important on end-user criteria. Our new units use the latest technology to ensure greater energy efficiency. Backing our beliefs - We are so confident in our product that we offer one years warranty on all condensers and an additional one year warranty on all E fans (subject to standard Terms & onditions of Sale and excluding corrosion through misapplication). E 1-8 Fansets The fansets chosen for the range offer the best combined performance for air volume, noise and efficiency available in the refrigeration industry, customers can select the latest E technology, offering high efficiency and speed controllability. G 1-16 oils oils are manufactured from high-quality materials ensuring a quality product without compromise. These coils have been tested extensively in Searle s Research & Development facility and ensures an optimised cooling efficiency. 1-9 Standard coils are manufactured from copper tubes, which are mechanically expanded into fully collared holes in the fins. This ensures an effective and permanent bond between the tube and the fin, maximising heat transfer characteristics. X 1-9 Within the coil casework surround, each fan chamber is separated by internal baffle plates to prevent windmilling of off-cycle fans. lternative fin materials are available to give added protection in polluted or saline atmospheres: - u/v - opper tube / vinyl coated aluminium fins u/u - opper tubes / copper fins u/et - opper tubes / electro tinned copper fins u/l - Blygold ll standard coils are fully leak and strength tested to 6 bar for a maximum ope pressure of 7 bar. V - 16 ulti-sectioning ll models are suitable for multi-sectioning, permitting more than one refrigeration system to operate with a single condenser. V - 16 ll V-bank and full width flat-bed units are twin section as standard. arger V-bank models are manufactured in sections, per coil to ensure they conform to category 1 of the Equipment Directive.

3 General Range Features Options apacity 15 DT1 Rows of Fans Supply E Fans diabatic ooling System Fin aterials & ph I V u 7-8 kw 1 or 1 & ph I V u 11-8 kw 1 or ph I V u kw 1 ph I V u kw 1 ph I V u - 70 kw ph I V u 6-86 kw ph I V u kw

4 ir ooled ondenser Options ontrol Options There are various optional Searle control packages available, including fully variable speed controlled products using Searle inverter control or the latest E fan control system. The control options include: - E speed control - Inverter speed control - Triac speed control - Dual speed step control - Single speed control If a speed control method is utilised Searle recommends adding the option of internal motor protection. diabatic ooling System Searle s adiabatic cooling system is designed to enhance the thermal performance by reducing the effective incoming air temperature during peak ambient and load conditions. ir temperature reduction is achieved by spraying water into the incoming airstream (please see Searle s diabatic brochure for further details). Other Options Searle offers a wide range of accessories and additional options, including anti-vibration mounts and optional leg extensions - to enhance fresh air in difficult locations. For further details please contact your Searle representative. Vertical ounting Flat bed units may be specified with the coil vertical for horizontal air flow systems. Sub-ooling Sub-cooling is achieved by the use of an integrated sub-cooling section which utilises approximately 10% of the coil surface. This provides up to 7 of sub-cooling at the standard condition of 15K DT1. Ope below 15K DT1, the amount of sub-cooling is reduced. The total heat of rejection capacity, inclusive of sub-cooling, will be reduced by 5%. The system should be designed so that refrigerant passes from the condensing section into a liquid receiver or liquid trap to prevent gas from entering the sub-cooling section. Some larger units will have the end cooling outlet at the opposite end to other connections.

5 Quality ssured Searle is a quality assured company to ISO 9001:008 encompassing Performance Testing, anufacturing Systems and Inspection Procedures. Eurovent ertification The range is certified under the Eurovent ERTIFY- ondensers program, with performances rated in accordance with B5 EN 7 and sound with EN187. Data covered includes: performance, sound power, mean sound pressure, power input and surface area. abelling abelling is now part of the Eurovent ertify-ll scheme. Rating is based on the ratio of nominal duty to power input with banding as in the table below. Where R= Nominal apacity / Total fan power input E arking Searle s condensers are E marked under the ow Voltage Directive. Under the Equipment Directive, they are category 1 or SEP and therefore excluded from it. Fan Data Searle offers a variety of fan types and speeds to suit specific requirements. The fansets include guarding in accordance with B5 EN ISO otors are environmentally protected to IP5. The wire fan guards are of welded construction and coated in a weatherproof durable synthetic finish for maximum corrosion protection Typical fan New fan The blade profile of Searle s new fan and its proximity to the fanplate reduces the occurrence of air-recirculation due to a more projected airflow. Fansets The standard fansets used in the entire Searle condenser range are external rotor motors with either die cast aluminium or plastic sickle bladed impellers. The sickleshaped design of the blades reduce the fan noise considerably versus other fansets available. The fansets are supplied with a full bell mouth fan plate, optimised to provide the highest efficiency, lowest noise fan currently available. otors can be connected in Delta or Star configurations for high or low speed operation or, as an option can be switchable between the speeds. The motors can also be externally speed controlled by triac or inverter systems. E Fansets For speed control the E motor offers high efficiency whilst being extremely quiet over its entire operational range. t nominal speed, there is an energy saving of about 10%. In the controlled range, both relative and absolute savings are substantially more pronounced. Fan type & Pole N5 6 Pole N6 Pole N6 6 Pole N6 8 Pole N8 6 Pole N8 8 Pole N8 1 Pole Q8 1 Pole Diameter odel ength B Speed (rpm) F (mp) Delta S (mpl) N5 Pole B Single Phase N5 8 Pole N9 6 Pole 9 E Technology 09 E Technology 500mm 60mm 800mm 9m B B B B B B B B B B B Star Variable Variable Note: The figures in the table are for 00V/ph/50Hz operation and are per fan. Speed (rpm) F (mp) S (mpl). Single Phase

6 Noise Data The mean unit sound pressure data at is given for each model in the catalogue and is certified as part of the Eurovent scheme. power testing and sound pressure calculation are carried out in accordance with EN187. ean sound pressure levels are for a parallel piped surface surrounding the unit on a reflective plane.: levels and sound spectrum are available on request. Dewpoint The capacities shown in this brochure are rated at dew point. This is the pressure/temperature condition at which a refrigerant gas begins to condense on the surface. s some refrigerants have significant glide (e.g. R07/ 07), the saturated gas and saturated liquid temperatures are not necessarily the same. It is important to ensure that all the components of a system are selected using the same method. power correction factors for multiple fans No Fans Whilst the use of mid-point does make selection easier, it is difficult to measure on site. t the catalogue point of 15K DT1, mid point capacities would be approximately 9% higher for R07 than the equivalent dew point figures shown in the tables orrections orrection Factors ultiply the capacity tables by the following factors depending on the DT1 temperature difference: R507, R1a, R0 R07, R07, DT1 8K 10K 1K 15K 17K 0K

7 Product Selection Software This document contains screenshots of selected features of the latest version of the Searle Product Selection software. This release retains the familiar interface which our customers tell us they like, but adds a number of new features requested by both customers and sales staff. Introductory Screen The main screen incorporates the traditional layout and appearance of the existing program, but now includes all product types within one program. The customer can select the type of product by clicking an icon or selecting from a drop-down list; whichever they find most convenient. The box to the left of the Select button allows the customer to enter a filter (for example for a ondenser selection) to limit the number of models considered. Specification as a PDF File Specification of Selected odels The new introductory screen places Searle within the context of our new parent group, GE Refrigeration. ain Screen The product specification of one or more models is presented in the traditional way. lthough not visible on this screenshot, the specification screen allows the customer to select optional extras (by ticking checkboxes at the bottom of the specification). The nett price of the unit (including extras and taking into account customer discounts) is immediately calculated and displayed. new feature of this version is that the specifcation can be presented as a PDF file. The appearance of the specification document will be enhanced to include company logos, contact information and anything else required to create a professional proposal document. The specification document can include one or more specification pages and the relevant drawings (extracted from the standard product range brochures). Note: also in the above screenshot that bookmarks in the PDF file allow quick navigation to the relevant part of a large specification document. Website Keep up to date with our products and latest news by visiting the website, co.uk. i) Selection software Use selection software and check product availability. fully interactive version of theselection software is available on-line at www. searle.co.uk. Our unique website allows visitors to use an interactive product selector, showing the latest stock availability. Simply click on Help e hoose and choose your product range, such as condensers, dry coolers and coolers. Then input your requirements and a range of suitable products will be shown. These products can be added to a basket, fromwhich you can for a quote from the Searle UK or export sales team ii) Online ordering If you buy direct from Searle an online customer account can be created for customer-specific pricing and online ordering. For further details please speak with your sales representative. iii) Download brochures and technical docments Visitors can view and download the latest information from the website. Our full product range and installation and maintenance instructions can be found on the Downloads menu bar. 7

8 E The E range of air-cooled condensers is based upon the well established E fin heat exchange matrix, combined with the HyBlade range of fans from ebmpapst. This combination offers a versatile and economical solution to many refrigeration and air conditioning applications. The range consists of one to eight fans in three coil depths and modules with 500 and 60 mm, 6 and 8 pole fans. This results in a wide range of capacities, noise levels and footprints to meet the diverse requirements of the industry. Optional extras for the E range include vertical orientation (1 to fan), multi circuiting, integral sub cooling section, alternative fin materials and coating. ontrol options include fan cycling, variable speed (including E) and individual fan isolators. The E range is also available as a fluid cooler designated DE. odel selections can be made either directly from the catalogue by using the popular Searle selection software available on D, as a download from the website or interactively on-line at E Features odule length sizes (,B,) 500mm or 60mm HyBlade fansets,6,8 pole or E Optional coil fin materials and coating Powder coated robust casework factory fitted or separate control options ompact design Vertical coil (1- fans) or Horizontal coil (1-8 fans) Wall mounting kits available for Vertical coil 1- fan units HyBlade 8

9 E Range E E 1 H - N 6 - odule length, B, Bank of fans 1 or Fans per bank 1 - oils rows,, Orientation H = Horizontal, V = Vertical Fans type N5 = 500mm,N6 = 60mm, otor speed 0, 06, 08, E, XX = ess fansets 1 = 1 - phase, = - phase oil material = opper tubes/ luminium fins, V = opper tubes/ Vinyl coated luminium fins U = opper tubes/ opper fins, ET = opper tubes/ opper fins electro-tinned BG = nti corrosion protection 9

10 E Selection Data odel (15 K DT1 - Dew Point) R0 & R507 D E T (High Speed) ir evel at (15 K DT1 - Dew Point) R0 & R507 S T R (ow Speed) ir evel at Total Surface Internal R0 harge kw m³/s db() W kw m³/s db() W m ² dm ³ kg 500mm pole 1 phase E D EB D E D E D EB EB E D EB D E D E D E D EB EB EB D E D E D E D EB EB D E D EB E D EB EB mm pole phase EB E E 8 7. E E E EB E E E E E EB E E E E E EB E E E E E EB E E EB E E E E E 1 7. EB E E E E E E E E 1 7. EB E E EB E E E E E EB E E E E E E E E EB E E E E E EB E E E E E

11 E Selection Data odel (15 K DT1 - Dew Point) R0 & R507 D E T (High Speed) ir evel at (15 K DT1 - Dew Point) R0 & R507 S T R (ow Speed) ir evel at Total Surface Internal R0 harge kw m³/s db() W kw m³/s db() W m ² dm ³ kg 500mm 6 pole 1 phase E EB B E B E B EB B EB B E EB B E B E B E EB B EB B EB B E B E E B EB B EB B E B EB B E B EB B EB B mm 6 pole phase EB D D 8 7. E D EB D EB E E EB D D E D EB D EB E EB D D E E D EB D EB D D EB E E D E EB D EB E E

12 E Selection Data odel (15 K DT1 - Dew Point) R0 & R507 D E T (High Speed) ir evel at (15 K DT1 - Dew Point) R0 & R507 S T R (ow Speed) ir evel at Total Surface Internal R0 harge kw m³/s db() W kw m³/s db() W m ² dm ³ kg 500mm 8 pole phase E B E EB E EB EB E B E EB E EB E B EB E EB E E B EB EB E EB E EB EB mm 8 pole phase EB B 8 7. E B EB B EB B B E B B E B EB B E B EB B EB B B E B B 1 7. EB B E B E B 1 7. EB B EB B EB B B E B B E B E B EB B EB B B E B B E B

13 E odel ayout E EB 90 E

14 E odel Drawings B1 B E SINGE BNK HORIZONT UNIT W (Overall egs) Optional Fan Isolator Optional J/Box E VERTI UNIT 88.0 H (Overall) 8.0 D fixing centres fixing centres E DOUBE BNK HORIZONT UNIT W (Overall egs) Optional Fan Isolator Optional J/Box 1 fixing hole 11.0mm x 16.5mm in base of each leg D fixing centres 1

15 Dimensions pprox Dry Fans oil B1 B D W H Weight Inlet outlet odel Banks per rows /V U/ET bank mm mm mm mm mm mm mm kg kg E /8 7/8 E /8 7/8 E /8 7/8 E /8 1.1/8 E /8 7/8 E /8 7/8 E /8 7/8 E /8 1.1/8 EB /8 7/8 EB /8 7/8 EB /8 1.1/8 EB /8 1.1/8 EB /8 7/8 EB /8 7/8 EB /8 1.1/8 EB /8 1.1/8 E /8 7/8 E /8 1.1/8 E /8 1.1/8 E /8 1./8 E /8 7/8 E /8 1.1/8 E /8 1.1/8 E /8 1./8 15

16 G The G range of fully weather-proofed air cooled condensers is suitable for a wide variety of applications, with a duty range of 15kW to 770kW. These capacities can be achieved both in flat-bed horizontal and vertical configurations. In addition, Searle has created the latest innovation of blowthrough horizontal coil designs for high ambient temperature applications. Due to the large number of options only a selection of the range is available in this catalogue, selection is best achieved using the Selection data tables or the Searle selection software, either on-line at or via the Searle Selection D. Searle achieves a close specification match through module length options of 100mm, m and 1800mm in a single (1158mm) or double (01mm) bank configuration. The range is up to 8 fans in length, combined with coil sizes between to row and multiple standard fan options up to 9m. Searle is able to manufacture units up to 1m in length with 16 fans For the ultimate in fan speed control, Searle offers the E fan, a high efficiency and low noise, complete fan speed control package. For full details of the E fanset and the suitable applications please refer to the front of this brochure. 16

17 G Range G G 1 H - Q 8 1 D - odule length (100mm), B (m), (1800mm) Bank of fans 1 or Fans per bank 1-8 (G), 1-6 (GB), 1-5 (G) oils rows,, Orientation H = Horizontal, V = Vertical Fans type N8 (800mm), Q8 (800mm), N9 (9m), 09 (9m), 99 (990mm) otor speed pole: 06, 08, 1, 09E (ax 855rpm), 9E (ax 600rpm) D = Delta, S = Star, = Speed oil material = opper tubes/ luminium fins, V = opper tubes/ Vinyl coated aluminium fins U = opper tubes/ opper fins, ET = opper tubes/ opper fins electro-tinned Note: Isolators and control box shown are additional extras 17

18 G 800mm 6 pole Selection data 18 odel (15KDT1 - Dew Point) R0 & R507 kw ir m /s Delta (High Speed) level at db() W (15KDT1 - Dew Point) R0 & R507 kw ir m /s Star (ow Speed) level at db() W Total Surface Internal R0 harge m dm kg G11H E D G16H E D G1H E D G8H E D GB11H E D GB1H E D GB1H E D GB1H E D GB15H E D GB1H E E GBH E D GBH E D GBH E D GB5H E D GB6H E E G11H D D G1H D D G1H D D G5H D D G11H E D G1H E D G1H E D G1H E D G15H E D G16H E D G1H E D GH E D GH E D GH E D G5H E D G6H E D G7H E D G8H E D GB11H D GB15H D GB1H E D GB1H E D GB6H E D G11H D G1H D G1H D G5H D G11H D D G16H D D G1H D D G8H D D GB11H D GB1H D GB1H D GB1H D GB15H D GB1H D GBH D GBH D GBH D GB5H D GB6H D G11H G1H G1H G1H G1H GH GH GH

19 odel (15KDT1 - Dew Point) R0 & R507 kw G 800mm 8 pole Selection data ir m /s Delta (High Speed) level at db() W (15KDT1 - Dew Point) R0 & R507 kw ir m /s Star (ow Speed) level at db() W Total Surface Internal R0 harge m dm kg G11H D G16H D G1H D G8H D GB11H GB1H GB1H GB1H GB15H GB1H D GBH GBH GBH GBH GB6H D G11H B G1H B G1H B G5H B G11H G1H G1H G1H G15H G16H G1H GH GH GH G5H G6H G7H G8H GB11H B GB15H B GB1H B GB6H B G11H B G1H B G1H B G5H B G11H B G16H B G1H B G8H B GB11H B GB1H B GB1H B GB1H B GB15H B GB1H B GBH B GBH B GBH B GB5H B GB6H B G11H B B G1H B B G1H B B G1H B B G1H B B GH B B GH B B GH B B G5H B B

20 G 800mm 1 pole Selection data 0 odel (15KDT1 - Dew Point) R0 & R507 kw ir m /s Delta (High Speed) level at db() W (15KDT1 - Dew Point) R0 & R507 kw ir m /s Star (ow Speed) level at db() W Total Surface Internal R0 harge m dm kg G11H B G16H B G1H B G8H B GB11H B GB1H B GB1H B GB1H B GB15H B GB1H B GBH B GBH B GBH B GB5H B GB6H B G11H B G1H B G1H B G5H B G11H B G1H B G1H B G1H B G15H B G16H B G1H B GH B GH B GH B G5H B G6H B G7H B G8H B GB11H GB15H GB1H GB6H G11H G1H G1H G5H G11H B G16H B G1H B G8H B GB11H GB1H GB1H GB1H GB15H GB1H GBH GBH GBH GB5H GB6H G11H G1H G1H G1H G1H GH GH GH G5H

21 odel (15KDT1 - Dew Point) R0 & R507 kw G 9m 6 pole Selection data ir m /s Delta (High Speed) level at db() W (15KDT1 - Dew Point) R0 & R507 kw ir m /s Star (ow Speed) level at db() W Total Surface Internal R0 harge m dm kg G11H E E GB11H E E G11H E E G11H E D G11H E D GB11H E D GB11H E D G11H D D G11H D D G1H E E GB1H E E GB1H E E G1H E E G1H E E G1H E D G1H E D GB1H E E GB1H E E GB1H D D G1H D D GB1H E E G1H D D G1H D D G1H E E GB1H E E GBH E E GB1H D D GH E E G1H E E G1H D D GB15H E E G15H E E GB1H D D GBH D D G15H E E GB16H E E GBH E E G1H D D GH D D G16H E E GH E E GB15H E D G18H E E G15H D E GB16H E E G17H E E G15H D E GBH E E GB16H E E GBH D D G18H E E GH E E G18H E E GH D D GB5H E E G5H E E GBH D D G5H E E GB6H E E GH D D G6H E E GB5H D D G8H E E G5H D E GB6H E E

22 G odel ayout G GB

23 G odel ayout G

24 G odel Drawings ommon junction box Fixing hole 15.0 in base of each leg 0.0 B1 B 0.0 Horizontal Unit Vertical Unit 1 bank Overall casework Optional fan isolator Overall casework 1 Fixing hole in base of each leg Fixing centres Horizontal Unit Vertical Unit Overall casework Optional fan isolator 1 bank Fixing hole in base of each leg Fixing centres Overall casework Notes: ll dimensions in mm. ommon junction box will vary in size and position depending on the control option required

25 Dimensions G G G G G G G G G G G G G G G G GB GB GB GB GB GB GB GB GB GB GB GB G G G G G G G G G G G Notes: odel Fans per bank oil rows B1 mm mm mm mm kg kg kg kg Total unit dry weight is dependent upon the coil material used ( = opper tubes with luminium or Vinyl coated aluminium fins, U = opper tubes with opper fins or opper fins electro-tinned). Total Unit Dry Weight * 1 bank * bank * * * * * * * * * * * * * * * * G * G * G * G * G * G * G * G * GB * GB * GB * * * * * * * * * * * GB * GB * GB * * * * * * * * * * * * G * G * G * G * B * * U 5

26 / X The and X ranges of fully weatherproofed air cooled condensers feature a new range of coil module sizes to extend the coil surface to air volume ratio and thereby increase the air-volume efficiency factor. The series has a duty range of 18kW to 596kW and the X series has a duty range of kw to 75kW. Both ranges are available in flat-bed horizontal and vertical configurations and have the latest innovation of blow-through horizontal design for high temperature applications. The full fanset options are available, including the 9m E energy efficient fanset, which enables a highly efficient, very low noise complete fan speed-control package. Full details of the E fanset and ideal application areas can be found in the E brochure. Due to the wide variety of condensers available only a selection of the range is available in this catalogue. For full selection data either refer to the Selection data tables or use the Searle selection software, either on-line or via the Searle Selection D. The range is available in a single width of 159mm and the X range is available in a single width of 01mm, both with module lengths of 100mm, m and 1800mm, up to 6 fans and to coil rows. 6

27 / X Range or X 1 6 H - N 8 1 D - odule length (100mm), B (m), (1800mm) Bank of fans 1 Fans per bank 1-8 ( & X), 1-6 (B & XB), 1-5 ( & X) oils rows,, Orientation H = Horizontal, V = Vertical Fans type N8 (800mm), Q8 (800mm), N9 (9m) 09 (9m), 99 (990mm) otor speed 06, 08, 1 or E D = Delta, S = Star, = Speed, Variable speed oil material = opper tubes/ luminium fins, V = opper tubes/ Vinyl coated aluminium fins U = opper tubes/ opper fins, ET = opper tubes/ opper fins electro-tinned Note: Isolators and control box shown are additional extras 7

28 / X Selection Data odel 800 mm 6 Pole (15KDT1 - Dew Point) R0 & R507 kw ir m /s Delta (High Speed) level at db() W (15KDT1 - Dew Point) R0 & R507 kw ir Star (ow Speed) X18H m 8 Pole 11H E D m /s level at db() W Total Surface Internal R0 harge m dm kg 11H D D B11H D H H D D B1H D H B1H D H H H B15H H B16H H D H D X11H D XB11H X11H B X1H D XB1H X1H B XB1H X1H B X1H B X1H B XB15H B X15H B XB16H B X17H B11H D D H D H E D B1H D D H B1H D D H H D H B15H D H D B16H D H D D H D D X11H D D XB11H X11H X1H D D XB1H X1H XB1H X1H X1H X1H XB15H X15H XB16H X17H D X18H D

29 odel (15KDT1 - Dew Point) R0 & R507 ir Delta (High Speed) level at (15KDT1 - Dew Point) R0 & R507 ir Star (ow Speed) level at Total Surface Internal kw m /s db() W kw m /s db() W m dm kg 800 mm 8 Pole 11H B mm 1 Pole / X Selection Data B11H B B H B H B B1H B B H B B1H B B H B H B B H B B15H B B H B B16H B B H B H B X11H B XB11H B X11H X1H B XB1H B X1H XB1H B X1H X1H B X1H XB15H B X15H XB16H B X17H B X18H B H B B11H H H B B1H H B1H H H H B15H H B16H H H X11H XB11H X11H X1H XB1H X1H XB1H X1H X1H X1H XB15H X15H XB16H X17H R0 harge X18H

30 odel ayout B 0

31 X odel ayout X XB X 1

32 odel Drawings ommon unction box 1 Fixing hole 15.0 in base of each leg 0.0 B1 B 0.0 Horizontal Unit Vertical Unit Overall casework Optional fan isolator Overall casework Fixing centres X Vertical Unit 95.0 X Horizontal Unit Overall casework Optional fan isolator Overall casework Fixing centres 1 fixing hole in base of each leg Notes: ll dimensions in mm. ommon junction box will vary in size and position depending on the control option required.

33 Dimensions B B B B B B B B B B B B B B odel /X Fans per bank oi rows mm B1 mm B mm Total Unit kg Dry WeightU kg kg X Total Unit Dry Weight U kg mm Notes: Total unit dry weight is dependent upon the coil material used ( = opper tubes with luminium or Vinyl coated aluminium fins, U = opper tubes with opper fins or opper fins electro-tinned).

34 V The V range extends the versatility of Searle s ir cooled condensers into a V-Bank configuration with a combination of coil widths and module lengths, fans wide. The available range has a duty from 6kW to 1088kW. Searle achieves a close specification match by offering three module length options of 100mm, m or 1800mm across three coil width options in the small footprint V- Bank formation. The V has x 15mm coils and the V has x 1905mm high coils with fans wide, all sizes offer the choice of to 6 fans in length. ombined with coil sizes from to row coils and multiple standard fan options up to 9m, this range of V configuration units is comprehensive. Searle now offers the E fan, a highly efficient and very low noise complete control package. Full details of the E fan and the best-suited application areas are included at the front of this brochure. Due to the large number of options only a selection of the range is available in this catalogue, selection is best achieved using the ondenser data tables or the Searle selection software, either on-line at or via the Searle Selection D.

35 V Range V V 6 - N 8 1 D - odule length (100mm), B (m), (1800mm) Bank of fans 1-6 Fans per bank 1-6 oils rows,, Orientation S = Small (mm) H = Horizontal, V = Vertical Fans type N8 (800mm), Q8 (800mm),N9 (9m), 09 (9m), 99 (990mm) otor speed 06, 08, 1, Q1 or E D = Delta, S = Star, = Speed, E Variable speed oil material = opper tubes/ luminium fins, V = opper tubes/ Vinyl coated aluminium fins U = opper tubes/ opper fins, ET = opper tubes/ opper fins electro-tinned Note: Isolators and control box shown are additional extras 5