DP15CH. Packaged Air Conditioner UP TO 15 SEER 2 to 5 Tons. Cooling Capacity: 23,600-57,500 BTU/h

Size: px

Start display at page:

Download "DP15CH. Packaged Air Conditioner UP TO 15 SEER 2 to 5 Tons. Cooling Capacity: 23,600-57,500 BTU/h"

Reginald Doyle
5 years ago
Views:

DP15H ooling apacity: 23,600-57,500 BTU/h Packaged Air onditioner UP TO 15 SEER 2 to 5 Tons ontents Nomenclature...2 Product Specifications...3 Expanded ooling Data...4 Airflow Data.

1 DP15H ooling apacity: 23,600-57,500 BTU/h Packaged Air onditioner UP TO 15 SEER 2 to 5 Tons ontents Nomenclature...2 Product Specifications...3 Expanded ooling Data...4 Airflow Data...16 Heater Kit Data...17 Wiring Diagram...18 Dimensions...20 Accessories...20 Standard Features Energy-efficient compressor with internal relief valve Variable-speed EM indoor blower motor Quiet horizontal discharge All-aluminum evaporator coil opper tube / aluminum fin condenser coil Totally enclosed, permanently lubricated condenser fan motor Fully charged system 5 kw to 20 kw electric heat kit available as a field-installed option AHRI ertified; ETL Listed abinet Features Heavy-gauge galvanized-steel cabinet with attractive Nickel Gray powder-paint finish ompressor sound blanket Aluminum foil-facing internal insulation reinforced with fiberglass scrim Fully insulated blower compartment with convenient access panels Louvered condenser coil protection One footprint; three heights ENERGY STAR and the ENERGY STAR mark are registered trademarks owned by the U.S. Environmental Protection Agency. ENERGY STAR products are third-party certified by an EPA-recognized ertification Body. Products that earn the ENERGY STAR prevent greenhouse gas emissions by meeting strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. * omplete warranty details available from your local dealer or at To receive the 6-Year Unit Replacement Warranty and 12-Year Parts Limited Warranty, online registration must be completed within 60 days of installation. Online registration is not required in alifornia or Quebec. SS-DP15H 6/18 Supersedes 5/18

2 Nomenclature D P 15 H ** ,5 6 7, ,12 Brand Engineering D Daikin brand Major/ Minor Revisions Product ategory Electrical P Packaged Unit /1/60 Efficiency Refrigerant SEER 4 R-410A SEER Nominal apacity Unit Type 24 2 Tons 42 3½ Tons Air onditioner 30 2½ tons 48 4 Tons H Heat Pump 36 3 Tons 60 5 Tons Airflow M Multi-Position H Horizontal 2 SS-DP15H

3 Product Specifications Models DP15H 2441A* DP15H 3041A* DP15H 3641B* DP15H 4241A* DP15H 4841A* DP15H 6041B* ooling apacity ooling apacity (BTU/h) 23,400 28,400 35,600 40,000 46,000 57,000 Sensible BTU/h 18,500 21,000 26,000 28,400 35,000 39,000 SEER / EER 15.0 / / / / / / 12.0 Decibels AHRI Numbers Evaporator Motor Type EM EM EM EM EM EM Wheel (D x W) 10" x 8" 10" x 8" 10" x 8" 10" x 8" 10" x 8" 11" x 8" ooling FM 850 1,050 1,200 1,300 1,600 1,600 Fan-Only FM ,100 1,200 1,400 1,700 RLA No. of Speeds Variable Variable Variable Variable Variable Variable Horsepower - RPM ½ - 1,050 ½ - 1,050 ½ - 1,050 ½ - 1,050 ¾ - 1,050 ¾ Evaporator oil Face Area (ft²) Rows Deep/ Fins per Inch 3/ 14 3/ 14 4/ 14 4/ 14 4/ 14 4/ 14 Indoor Orifice Size TXV Filter Size (") 20 x 20 x 1 20 x 25 x 1 25 x 25 x 1 (2) 20 x 20 x 1 (2) 20 x 20 x 1 (2) 20 x 25 x 1 All-Aluminum coil X X X X X X Drain Size (NPT) ¾" ¾" ¾" ¾" ¾" ¾" Refrigerant harge (oz.) ondenser Fan / oil Horsepower - RPM 1/ /6-815 ¼ ¼ ¼ ¼ RLA/LRA 1.1 / / / / / / 2.9 Fan Diameter/ # Fan Blades 22 / 2 22 / 2 22 / 3 22 / 4 22 / 4 22 / 4 Face Area (ft²) Rows Deep/ Fins per Inch 1 / 27 1 / 27 1 / 27 2 / 27 2 / 27 2 /27 ompressor Quantity / Type 1 / Scroll 1 / Scroll 1 / Scroll 1 / Scroll 1 / Scroll 1 / Scroll Stage Single Single Single Single Single Two ompressor RLA/LRA 13.5/ / / / / /147 Electrical Data Voltage-Phase (60 Hz) 208/ / / / / /230-1 Indoor Blower FLA Outdoor Fan RLA Total Unit Amps Min. ircuit Ampacity¹ Max. Overcurrent Protection (amps)² Operating Weight (lbs) Ship Weight (lbs) Energy Star ertified NO NO ¹ Wire size should be determined in accordance with National Electrical odes. Extensive wire runs will require larger wire sizes. ² May use fuses or HAR-type circuit breakers of the same size as noted. Note: Always check the S&R plate for electrical data on the unit being installed. SS-DP15H 3

4 Expanded ooling Data DP15H2441** MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR IDB = Entering Indoor Dry Bulb Temperature Shaded area reflects AA (TVA) conditions. kw = total system power High and low pressures are measured at the liquid and suction access fittings. Amps: Unit amps (comp.+ evaporator + condenser fan motors) Design Subcooling, 8±3 the liquid access fitting connection AHRI 95 test conditions. Design Superheat 9±3 the compressor suction access fitting connection. 4 SS-DP15H

5 Expanded ooling Data DP15H2441** MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR IDB = Entering Indoor Dry Bulb Temperature Shaded area reflects AHRI conditions. kw = total system power High and low pressures are measured at the liquid and suction access fittings. Amps: Unit amps (comp.+ evaporator + condenser fan motors) Design Subcooling, 8±3 the liquid access fitting connection AHRI 95 test conditions. Design Superheat 9±3 the compressor suction access fitting connection. SS-DP15H 5

6 Expanded ooling Data DP15H3041** MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR IDB = Entering Indoor Dry Bulb Temperature Shaded area reflects AA (TVA) conditions. kw = total system power High and low pressures are measured at the liquid and suction access fittings. Amps: Unit amps (comp.+ evaporator + condenser fan motors) Design Subcooling, 10±3 the liquid access fitting connection AHRI 95 test conditions. Design Superheat 10±3 the compressor suction access fitting connection. 6 SS-DP15H

7 Expanded ooling Data DP15H3041** MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR IDB = Entering Indoor Dry Bulb Temperature Shaded area reflects AHRI conditions. kw = total system power High and low pressures are measured at the liquid and suction access fittings. Amps: Unit amps (comp.+ evaporator + condenser fan motors) Design Subcooling, 10±3 the liquid access fitting connection AHRI 95 test conditions. Design Superheat 10±3 the compressor suction access fitting connection. SS-DP15H 7

8 Expanded ooling Data DP15H3641** MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR IDB = Entering Indoor Dry Bulb Temperature Shaded area reflects AA (TVA) conditions. kw = total system power High and low pressures are measured at the liquid and suction access fittings. Amps: Unit amps (comp.+ evaporator + condenser fan motors) Design Subcooling, 12±3 the liquid access fitting connection AHRI 95 test conditions. Design Superheat 13±3 the compressor suction access fitting connection. 8 SS-DP15H

9 Expanded ooling Data DP15H3641** MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR IDB = Entering Indoor Dry Bulb Temperature Shaded area reflects AHRI conditions. kw = total system power High and low pressures are measured at the liquid and suction access fittings. Amps: Unit amps (comp.+ evaporator + condenser fan motors) Design Subcooling, 12±3 the liquid access fitting connection AHRI 95 test conditions. Design Superheat 13±3 the compressor suction access fitting connection. SS-DP15H 9

10 Expanded ooling Data DP15H4241** MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR IDB = Entering Indoor Dry Bulb Temperature Shaded area reflects AA (TVA) conditions. kw = total system power High and low pressures are measured at the liquid and suction access fittings. Amps: Unit amps (comp.+ evaporator + condenser fan motors) Design Subcooling, 12±3 the liquid access fitting connection AHRI 95 test conditions. Design Superheat 8±3 the compressor suction access fitting connection SS-DP15H

11 Expanded ooling Data DP15H4241** MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR IDB = Entering Indoor Dry Bulb Temperature Shaded area reflects AHRI conditions. kw = total system power High and low pressures are measured at the liquid and suction access fittings. Amps: Unit amps (comp.+ evaporator + condenser fan motors) Design Subcooling, 12±3 the liquid access fitting connection AHRI 95 test conditions. Design Superheat 8±3 the compressor suction access fitting connection. SS-DP15H 11

12 Expanded ooling Data DP15H4841** MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR IDB = Entering Indoor Dry Bulb Temperature Shaded area reflects AA (TVA) conditions. kw = total system power High and low pressures are measured at the liquid and suction access fittings. Amps: Unit amps (comp.+ evaporator + condenser fan motors) Design Subcooling, 10±3 the liquid access fitting connection AHRI 95 test conditions. Design Superheat 12±3 the compressor suction access fitting connection SS-DP15H

13 Expanded ooling Data DP15H4841** MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR MBh S/T T kw Amps HI PR LO PR IDB = Entering Indoor Dry Bulb Temperature Shaded area reflects AHRI conditions. kw = total system power High and low pressures are measured at the liquid and suction access fittings. Amps: Unit amps (comp.+ evaporator + condenser fan motors) Design Subcooling, 10±3 the liquid access fitting connection AHRI 95 test conditions. Design Superheat 12±3 the compressor suction access fitting connection. SS-DP15H 13

GPH13H. Packaged Heat Pump. 13 SEER / R-410A 2 to 5 Tons. Cooling Capacity: 24,000-57,500 BTU/h Heating Capacity: 22,000-54,500 BTU/h

GPH13H. Packaged Heat Pump. 13 SEER / R-410A 2 to 5 Tons. Cooling Capacity: 24,000-57,500 BTU/h Heating Capacity: 22,000-54,500 BTU/h H Packaged Heat Pump ooling apacity: 24,000-57,500 BTU/h Heating apacity: 22,000-54,500 BTU/h 13 SEER / R-410A 2 to 5 Tons Standard Features Energy-efficient compressor with internal relief valve PS blower