A Publication of The Electrical and Electronics Association of Malaysia

Transcription

1

2 73rd ISSUE

3

4

5 TEEAM Office Bearers For Year President Ir Yong Ah Huat (Individual) Deputy President Siew Choon Thye (Gruppe Lighting Solution Sdn Bhd) Immediate Past President Ir Chew Shee Fuee KMN (G H Liew Engineering (1990) Sdn Bhd) Past President / Adviser Dato Ir Lee Peng Joo Past President Fu Wing Hoong (EITA Resources Berhad) Suresh Kumar J Gorasia (Amalgamated Engineering & Commercial Co (KL) Sdn Bhd) Vice Presidents Ir Chang Yew Cheong (Abbaco Controls Sdn Bhd) Stan Lim Hui Ming (Nanyang Electric Co (M) Sdn Bhd) Simon Leong Kien Khan (Federal Electrical Engineering Sdn Bhd) Honorary Secretary Subramaniam Karuppan (Datmel Technology Sdn Bhd) Honorary Treasurer Wong Chin Cheong (FACC Electrical Trading Sdn Bhd) Assistant Honorary Secretary Lim Sai Seong (QAV Technologies Sdn Bhd) Assistant Honorary Treasurer Ooi Eng Guan (Y2K Electric (M) Sdn Bhd) Committee Members Andrew Lu Zen Kai (Powerpoint Electrical Sdn Bhd) Datuk Ir Azlan Robert Abdullah (Aras Kejuruteraan Sdn Bhd) Bunny Teh Bung Nee (Sabah Electrical Association) Chan Kaim Sam (The Perak Electrical Association) Chew See Kheng (Negeri Sembilan Electrical Engineering Association) Chin Ket Hiung (Sandakan Electrical Engineering Association, Sabah) Chong Kwong Fah (See Wide Letrik (Selangor) Sdn Bhd) Chong Yoon Koon (Chong s Engineering Trading & Trading) Dahari Mat Siran (Hager Engineering (M) Sdn Bhd) Ir Darren Lee Weng Keen (Penang Electrical Merchants Association) David Chong Ah Nyap (Euro Electrical Sdn Bhd) Gan Seng Chong (Malacca Electrical Contractors & Traders Association) Hii Hua Chuon (Electrical Association of Sarawak & Sabah) How Chee Seng (CS Project & Engineering PLT) Ir Kok Yen Kwan (NK Engineers Sdn Bhd) Lawrence Lai Kun Hoong (Covis Sdn Bhd) Lee Chee Boon (Johor Bahru Electrical & Electronics Association) Lee Peng Sian (Furutec Electrical Sdn Bhd) Ir Lee Teck Hock (Simpro Engineering Sdn Bhd) Leonard Choong Kin Loong (KDK Fans (M) Sdn Bhd) Liang Kok Boon (Chi-Tak Electrical (Selangor) Sdn Bhd) Low Oi Keong (Eco Jaya Elektrik Sdn Bhd) Narendren Rengasamy (Malaysia CIE) Ir Dr Ng Kok Chiang (Syarikat Pembaiki Letrik Leong Hing) Nick Liew Kar Hoe (Persatuan Kekompetenan Penjaga Jentera & Pendawai Elektrik Perak) Perumal Vengadasalam, PPN, PJK, PJM (Individual) Dato Sri Ir Peter Lu Nguang Siong (Sarawak Electrical Association) Rajasegaran Bungara Naidu (Saturn Pyro Sdn Bhd) Dato Tan Cheng Hooi (Tenaga Letrik Sdn Bhd) Dr Tan Ching Seong (Individual) Technical Adviser Ir Rocky Wong Hon Thang (Individual) Datuk Ir Ahmad Fauzi Hasan (Individual) Legal Advisers Toh Chia Toh Wee Hua (Individual) Internal Auditors Fong Mun Loon (Letrik P J Union Sdn Bhd) Yong Kim Yun (Translite Electric Sdn Bhd) Trustees Ir G H Liew (G. H. Liew Engineering Services Sdn Bhd) Lim Yok Kee (Nanyang Electric Co (M) Sdn Bhd) Suresh Kumar J Gorasia (Amalgamated Engineering & Commercial Co (KL) Sdn Bhd) Wong Chin Cheong (FACC Electrical Trading Sdn Bhd) Secretariat Winnie Khong (Executive Secretary) State Association Members Electrical Association of Sarawak & Sabah Johor Bahru Electrical & Electronics Association Malacca Electrical Contractors & Traders Association Negeri Sembilan Electrical Engineering Association Penang Electrical Merchants Association Persatuan Kekompetenan Penjaga Jentera & Pendawai Elektrik Perak Sabah Electrical Association Sandakan Electrical Engineering Association, Sabah Sarawak Electrical Association The Perak Electrical Association A Publication of The Electrical and Electronics Association of Malaysia Publisher & Editorial: The Electrical and Electronics Association of Malaysia No. 5-B, Jalan Gelugor, Off Jalan Kenanga, Kuala Lumpur, Malaysia. Tel: , Fax: teeam@teeam.org.my or teeam52@gmail.com Website: Facebook: Activities From the Editor s Desk 5 AFEEC-FAPECA Conference & Meeting IGEM Technical Visits to Penang 23 Wire & Tube Southeast Asia Panel Discussion on the Importance of Electro-Safety 29 Wire & Cable Malaysia Bowling Tournament 35 Courtesy Visit by GABEL Indonesia 39 MBAM One Build Technical Visit to Draka Malaysia and Sindutch Cable 43 IEM-ST Electrical Safety Seminar 45 TEEAM Specialised Group Engineering Construction & Services 49 Wire & Cable Vietnam State Associations News 53 Badminton Tournament 65 EW, CFL & FL Recycling Programme 71 New Members 95 Feature Articles Energy Efficiency Initiatives Towards Carbon Neutral in Malaysia Industries 69 What is the Impact of Industry 4.0 on the Electrical Switchgear Industry? 73 How To Achieve Good Electrical Connections 75 Hong Kong s Roadmap Towards Carbon Neutral 81 The Green & Clean Business Opportunities for Contractors 93 Information Advertisers Index 96 Highlights AFEEC-FAPECA Conference & Meeting 2017 page 7 IGEM 2017 page 19 Wire & Cable Malaysia 2017 page 31 Technical Visit to Draka Malaysia and Sindutch Cable page 43 IEM-ST Electrical Safety Seminar page 45 Badminton Tournament page 65 The Electrical and Electronics Association of Malaysia as a body is not responsible for statements or opinions published, nor do these necessarily reflect the views of the Association unless expressly stated. Articles, news and letters for consideration are welcomed. Published material may be copied if the source, SUARA TEEAM, is acknowledged. Please note that feature articles are the copyright of the contributors. It may not be reproduced without the prior permission of the contributors and/or SUARA TEEAM.

6

7 Publication Sub-Committee Chairman Ooi Eng Guan Y2K Electric (M) Sdn Bhd Tel: Fax: Vice Chairman Perumal Vengadasalam, PPN, PJK, PJM Individual Member Tel: Fax: Treasurer Chong Yoon Koon Chong s Engineering Trading & Company chongyk @gmail.com Editor Ir Chew Shee Fuee KMN G H Liew Engineering (1990) Sdn Bhd Tel: Fax: Committee Member Wong Chin Cheong FACC Electrical Trading Sdn Bhd Tel: Fax: Suara TEEAM is distributed free of charge to TEEAM members and selective organisations. For those who wish to purchase a copy, the cost is RM18.00 which includes postage within Malaysia. For overseas orders, please check with the publisher. Circulation TEEAM Secretariat Tel: Fax: Contribution of Articles Ir Chang Yew Cheong changyewcheong@gmail.com Ir Chew Shee Fuee KMN sfchew@ghliew1990.com Ir Dr Gobbi Ramasamy gobbi@mmu.edu.my Mr Ng Choon Guan ncguan@gmail.com Mr Tunpong Haruencheep temca@temcathai.com Ir Walter Au walterau@likkai.com.hk Artwork & Design United Mission Press Sdn Bhd 25, 27, Jalan PBS, 14/14, Taman Perindustrian Bukit Serdang, Sri Kembangan, Selangor Darul Ehsan. Tel: Fax: Printer United Mission Press Sdn Bhd 25, 27, Jalan PBS, 14/14, Taman Perindustrian Bukit Serdang, Sri Kembangan, Selangor Darul Ehsan. Tel: Fax: Happy 2018 to everyone and here s hoping that it will be a more rewarding year for all of you. Advance greeting for a Prosperous Chinese New Year to you as well. We have successfully hosted the AFEEC-FAPECA Conference & Meetings at KLCC from 11th to 13th October It co-incided with IGEM 2017, an International Greentech and Eco Products Exhibition & Conference. We cordially welcomed more than 120 delegates from Singapore, Thailand, Philippines, Indonesia, Hong Kong, Taiwan and South Korea. We have included some of the presentation papers from our conference in this issue of SUARA 73. They are highly informative with valuable contents therein. The Organising Committee deserves the praises for a job well done. The forthcoming 2018 AFEEC-FAPECA Conference & Meetings will be held in the Philippines. Technical visits to Malacca and Penang had been successfully undertaken and hopefully more can be arranged for the benefit of our members. This is a win-win networking opportunity for all. Industry 4.0 is going to revolutionise the manufacturing and related industries. This implementation will create great opportunities for the industries. This is a new area creating the need for new products and services. The potential to succeed is huge. Best Regards Ir Chew Shee Fuee KMN Editor Suara TEEAM 5

8

9 73rd ISSUE AFEEC-FAPECA Conference & Meeting in Kuala Lumpur TEEAM was honoured to host the 2017 Conference and Meeting of the ASEAN Federation of Electrical Engineering Contractors (AFEEC) and the Federation of Asian Pacific Electrical Contractors Associations (FAPECA). The grand event was held from 11th to 13th September 2017 at the Kuala Lumpur City Centre in conjunction with IGEM 2017 an International Greentech & Eco Product Exhibition & Conference. This important Conference and Meeting drew positive participation from National Associations including the Association of Indonesia Electrical and Mechanical Contractors (AKLI), Korea Electrical Contractors Association (KECA), Society of Philippines Electrical Contractors & Suppliers (SPECS), Taiwan Electrical Contractors Association (TECA), Hong Kong Electrical Contractors Association (HKECA), Thai Electrical & Mechanical Contractors Association (TEMCA), Singapore Electrical Contractors & Licensed Electrical Workers Association (SECA) and TEEAM Malaysia. We had an overwhelming 180 delegates. Conference on Carbon Neutral Opportunities Carbon Neutral Opportunities was a very challenging topic for the conference, which was held on 11th October 2017 at the Impiana KLCC Hotel. However, this did not hinder participating countries in submitting their informative conference papers comprising valuable contents. In the Evolution of E&E business and industries, we need to initiate steps to protect Mother Earth, leaving minimal or zero carbon footprint. Global warming is already happening and that too, at an alarming rate. Therefore, we need to change the way we do business to reduce such an environmental impact. During the course of this evolution to greener practices, there are many opportunities awaiting for us to unearth. New discovery through research papers, ecofriendly solutions, re-engineering of practices and new undiscovered businesses are some of the exciting opportunities, to name a few. The conference discussed and shared ways to overcome global warning and to reduce the environmental impact from the respective countries activities. Opening ceremony (from left) Ir Chew Shee Fuee KMN (AFEEC President & TEEAM Immediate Past President), Mr Suresh Kumar Gorasia (Organising Chairman & TEEAM International Affairs Chairman), YBhg Tan Sri Dr Ahmad Tajuddin Ali (Guest of Honour, CIDB Chairman), Ir Yong Ah Huat (TEEAM President) and Mr John Tan (FAPECA President from Singapore). The Opening of the overwhelmingly-attended Conference was officiated by Tan Sri Dr Ahmad Tajuddin Ali, Chairman of CIDB (Construction Industry Development Board, Malaysia). Very interesting and informative papers were also presented during the Conference. The topics were: * Energy Efficiency Initiatives towards Carbon Neutral In Malaysian Industries, by Ir Dr Gobbi Ramasamy, TEEAM Malaysia * The Singapore Climate Change Report 2017, by Mr Edward Kway, SECA Singapore * Deep De-carbonisation Pathway Case: Indonesia Energy Sector, by Ir Nick Nurrachman, AKLI Indonesia * Hong Kong s Roadmap Towards Carbon Neutral, by Ir Walter T K Au, HKECA Hong Kong Overwhelming 180 participants from local and overseas gathered in Kuala Lumpur. 7

10

11 ... Continue AFEEC-FAPECA Conference & Meeting in Kuala Lumpur * National Climate Change Action Guidelines, by Mr Mao-Chung, TECA Taiwan * Sustainable and Co-existable Power Network of Korea for the 4th Industrial Revolution, by Professor Mun Seungil, KECA Korea * The Green & Clean Business Opportunity for Contractors, by Mr Tunpong Haruencheep, TEMCA Thailand * The Philippines Electrical Vehicle Industry Roadmap, by Mr Arturo P Cenal, SPECS Philippines There was a very active Q&A session at the end of the Conference. Each Conference participant gladly received a certificate of attendance with approved BEM CPD hours, CIDB CCD points and ST CPD hours. Welcome Dinner A Welcome Dinner was hosted by TEEAM for the foreign delegates and sponsors. It was a friendly atmosphere for delegates to network with and to build business contacts. The Guest of Honour for the night was Tan Sri Peter Chin Fah Kui, Chairman of MGTC (Malaysia Green Technology Corporation). The Dinner also witnessed the presentation of the AFEEC Best Electrical Contractors Awards for 2017 to TEMCA members from Thailand. The other AFEEC member countries did not participate. The recipients were: C.A.K. International Winner of Industrial Category City Power Winner of Commercial & Residential Category ITALTHAI Engineering Winner of Infrastructure Category Thereafter, appreciation awards were presented to the sponsors 73rd ISSUE for their tremendous support. A vibrant and colourful cultural performance and singing session enlightened the dinner. IGEM 2017 AFEEC-FAPECA delegates were invited to attend the Opening of IGEM 2017, an International Greentech & Eco Products Exhibition & Conference organised by the Ministry of Energy, Green Technology and Water, Malaysia (KeTTHA), at the Kuala Lumpur Convention Centre. The IGEM 2017 Opening held on 12th October 2017 was officiated by The Honourable Datuk Seri Panglima Dr Maximus Johnity Ongkili, KeTTHA Minister. Following the Opening, a guided VIP tour was arranged for the delegates to visit the exhibition halls comprising exhibition zones on Green Energy, Green Transport, Green Building and Green Industry. The delegates had a good time visiting the halls to view the latest technologies, products and services available in the market. AFEEC-FAPECA Board Meetings The 55th AFEEC Council Meeting and 31st FAPECA Executive Board Meeting were convened smoothly in the afternoon, at the Kuala Lumpur Convention Centre. It was also an excellent avenue for networking and exploring business opportunities. The Meeting witnessed the official hand-over of the FAPECA Presidency from AFEEC to KECA Korea. Mr Ryu Jae-Sun, President of KECA, now helms the FAPECA Presidency for the term The AFEEC presidency is helmed by Ir Chew Shee Fuee KMN of TEEAM Malaysia for the term This annual meeting is important to bind members in achieving the common objectives - one of which is to promote and recommend rules and standards that will govern the regional operations of the electrical engineering contracting industry, in order to ensure and Cheers VIP guests at the welcome dinner. Meeting in progress AFEEC & FAPECA Board Meetings held at KL Convention Centre. Panel of speakers (second from right) Ir Dr Gobbi Ramasamy, speaker from Malaysia shared his view during the conference. Generous sponsors Presentation of appreciation plaques to all the conference sponsors for making the event a success. 9

12

13 ... Continue AFEEC-FAPECA Conference & Meeting in Kuala Lumpur healthy competition among the members, in an atmosphere of winwin constructive co-operation and mutual understanding. Technical Visit to Malacca & Networking Golf Session A Technical Visit was organised for the foreign delegates to the Gading Kencana Solar Farm in Malacca on 13th October Delegates were excited to see the showcase development of an emerging green champion and learned about the cutting-edge innovation and technology used in this efficient solar farm of Gading Kencana. A big thank you to Gading Kencana for the visit opportunity and their warm hospitality. Thereafter, delegates were guided for a short Malacca City Tour before heading for an authentic lunch and then back to Kuala Lumpur. As for the golf enthusiasts, a Networking Golf Session was arranged at the Tropicana Golf & Country Club. The golf game aimed to promote sporting spirit and further strengthening of business cooperation and friendship ties amongst AFEEC-FAPECA members. 73rd ISSUE Farewell Dinner A Farewell Dinner was hosted by TEEAM at the Impiana KLCC Hotel to bid farewell to the foreign delegates. It was a casual night filled with much laughter and very entertaining karaoke singing sessions amongst the delegates. There were delicious Malaysian cuisine, beers and DJ filling the air with good music all around. It was indeed a joyful night for all. TEEAM would like to extend our greatest gratitude to all foreign delegates for their pro-active commitment and participation in this important meet. To our local delegates and sponsors, a very big thank you to you too for your great support. The Organising Committee was amazing in putting up such tremendous hard work and great effort in organising such a fantastic grand event. Well done! Congratulations! Additionally, SPECS is slated to host the 2018 AFEEC-FAPECA Conference and Meeting in Philippines in the month of September 2018 in-conjunction with the Electrical, Energy & Power Philippines 2018 Exhibition (EE & P 2018). Networking golf Overseas golfers enjoyed the games at the Tropicana Golf & Country Resort in Petaling Jaya. Technical visit Group photo at Gading Kencana solar farm in Malacca. Farewell Dinner Fun-filled night for the delegates 11

14

15 ... Continue AFEEC-FAPECA Conference & Meeting in Kuala Lumpur 73rd ISSUE Carbon Neutral Opportunities Conference at Impiana KLCC Hotel 13

16

17 ... Continue AFEEC-FAPECA Conference & Meeting in Kuala Lumpur 73rd ISSUE Good Networking Welcome Dinner 15

18

19 ... Continue AFEEC-FAPECA Conference & Meeting in Kuala Lumpur 73rd ISSUE Enjoyable Farewell Dinner 17

20

21 73rd ISSUE IGEM 2017 The International Greentech & Eco Products Exhibition & Conference 2017 (IGEM 2017) was successfully organised by the Ministry of Energy, Green Technology and Water, Malaysia (KeTTHA) from 11th to 13th October 2017 at the Kuala Lumpur Convention Centre, Malaysia. The event received overwhelming support from the industry as well as the trade visitors, throughout the successful 3-day event. IGEM 2017 s goal was to implement the use of renewable and sustainable energy as mainstream power generators to create a clean and green environment for the country. Powering Green Cities, the theme of IGEM 2017, was a clear-cut testament from KeTTHA and GreenTech Malaysia, regarding Malaysia s proactive green objective. This high-profile event was co-organised by Greentech Malaysia and UBM-MES. TEEAM was honoured to be one of the supporting organisations. The Honorable Datuk Seri Panglima Dr Maximus Johnity Ongkili, KeTTHA Minister, officiated the Opening Ceremony of IGEM 2017 on 12th October The Ceremony also saw the launch of the Green Technology Master Plan, which details the nation s plans for green technology development, in the concerted push for a lowcarbon and resource-efficient economy. Following the Opening, a guided VIP tour was made to the exhibition halls where several other events were also concurrently taking place. These included Product Launches and MOU Signing Ceremonies. There were four zones presented at IGEM 2017; viz., Green Energy, Green Transport, Green Building and Green Industry, all of which showcased international and local major players from the industry, exhibiting new technologies and services, conducting in-depth discussions, forums and meetings focused on current and future plans in keeping the planet safe, i.e., the GREEN way. Some 320 participating companies from twenty countries took part in IGEM There were nine participating Malaysian States in the State Pavilions and five International Pavilions from China, Japan, Korea, Taiwan and EUMCCI (EU-Malaysia Chamber of Commerce and Industry). Various conferences, workshops, seminars and pocket talks took place, which covered vast topics such as Carbon Neutral Opportunities, Product Carbon Footprint, Sustainable Cities, Palm Oil Sustainability, Environmental Co-Operation, Sustainable Energy and many others. IGEM 2017 recorded an impressive turnout of 34,868 trade visitors. IGEM will return in 2018 for another promising event from 17th to 20th October VIPs on the stage Official Opening by (3rd from right) The Honorable Datuk Seri Panglima Dr Maximus Johnity Ongkili (KeTTHA Minister) for the three days shows. Strong support from the industry A cross-section of VIPs and guests. At TEEAM s booth Delegates from HKECA, Hong Kong at the exhibition ground. Strong Contingent AFEEC-FAPECA delegation to IGEM Opening Ceremony. 19

22

23 ... Continue IGEM rd ISSUE AFEEC-FAPECA Delegates at IGEM Exhibition 21

24

25 73rd ISSUE Technical Visits to Penang The TEEAM Engineering Construction & Services Committee organised a 2-Day Technical Visits to Furutec Electrical Sdn Bhd, OSRAM Opto Semiconductors (Malaysia) Sdn Bhd and OAV Technologies Sdn Bhd which are based in Penang. TEEAM received 27 registrations to participate, including members from Persatuan Kekompetenanan Penjaga Jentera & Pendawai Elektrik Perak (Perak Electrical Chargemen & Wiremen Competence Association, PKPPE) and Penang Electrical Merchants Association (PEMA). The key purpose of the visits was to enable its participants to gain a much deeper understanding on Furutec s busbar manufacturing and Osram LED s components manufacturing activities, as well as the various testing facilities available at QAV. It also provided a great platform to network and create win-win business opportunities. Technical Visit 1: To Furutec Electrical Sdn Bhd On the afternoon of 7th December 2017, the TEEAM delegates visited Furutec Electrical Sdn Bhd, which is located in Seberang Prai Tengah, Penang. Participants were well received by Mr Lee Peng Sian (Furutec Managing Director and also TEEAM Council Member) and his esteemed officials. Furutec Electrical started to manufacture its busduct system in Penang since 1995 under license from Furukawa Electric, Japan. In 2008, EITA Resources Berhad ventured into designing and manufacturing the busduct system too and Furutec then became a wholly-owned subsidiary of EITA Resources Berhad. In responding to global climate change, Furutec has continuously taken green initiatives to introduce environmentally-friendly steps in several key aspects, viz., to be eco-friendly in their building design, manufacturing process and product design. Participants explored Furutec s environmental management techniques and methods, in promoting energy efficiency in their organisations. At the end of the fruitful visit, all participants were treated to a durian feast and also a sumptuous seafood dinner. Fellowship (from left) Ir Chang Yew Cheong (TEEAM Vice President), Mr Lee Peng Sian (Furutec Managing Director & TEEAM Council Member), Mr Simon Leong (TEEAM Vice President), Mr Suresh Kumar Gorasia (TEEAM International Affairs Chairman & Past President) and Mr David Chan (TEEAM Member, a Consultant). Memorable group photo A truly fruitful visit for remembrance. Attentive - Briefing at Furutec. Factory visit Participants having a better understanding on the busbar operation. Warm hospitality Durian lovers enjoying Penang s famous and top grade durians at Furutec, at the end of their fruitful Technical Visit. Certificate of Appreciation A big thank you to Furutec for the warm hospitality. 23

26

27 ... Continue Technical Visits to Penang Technical Visit 2: To OSRAM Opto Semiconductors (Malaysia) Sdn Bhd On the morning of 8th November 2017, the participants proceeded to the Bayan Lepas Free Industrial Zone to visit OSRAM Opto Semiconductors (Malaysia) Sdn Bhd - which is well-known as the driver of innovation in the semiconductor sector. The hightech company had been investing in research and pro-actively developing new products with cutting-edge technology, enabling OSRAM Opto Semiconductors to set high international standards in the fields of illumination, visualisation and sensor technology. After the briefing session, a delicious lunch was hosted by OSRAM. Thereafter, participants were guided to a factory tour and were briefed regarding the many stages of the manufacturing process. The expertise of OSRAM Opto Semiconductors extends from basic semiconductor technologies to individual customer applications. Their product portfolio comprises high-performance Light-Emitting Diodes (LEDs), for example, for automotive and general lighting applications, miniature LEDs for mobile devices as well as Infra-red Diodes (IRED), semiconductor lasers and detectors. Overall, it was an eye-opener and a fruitful visit to all who joined the entourage. 73rd ISSUE Technical Visit 3: To QAV Technologies Sdn Bhd After visiting OSRAM, some of the participants continued to visit QAV Technologies Sdn Bhd, a testing company that provides various testing facilities, specialising in LED and luminaires. The visit was officially well-received by QAV Director, Mr Lim Sai Seong, who is also TEEAM Assistant Honorary Secretary. QAV is a Conformity Assessment Body and the only recognised private test lab by the Energy Commission (Suruhanjaya Tenaga, ST). QAV has been recognised by the Environment Protection Act of the United States of America, to carry out Testings as per the Energy Star requirements of TUV Taiwan, TUV Korea and the American National Standard Institute (ANSI) for the lightings, automotive, medical and semiconductor industries. Energy Star is the only ANSI-recognised Lab in Asia. TEEAM delegates had a fruitful experience during the 2-day Technical Visits and we at TEEAM wish to record our highest appreciation and sincere thanks to the generous hosts; Furutec, OSRAM and QAV, for their excellent arrangement and warm hospitality during our stay in Penang. Congratulations! Info sharing - Briefing at OSRAM Opto Semiconductors. For the album Group photo at QAV. Appreciation Ir Chang Yew Cheong (TEEAM Vice President) presented a token of appreciation to Ms Chow San San (Manager, Marketing & Business Development of OSRAM Opto Semiconductors) after the briefing session. Appreciation (right) Ir Chang Yew Cheong (TEEAM Vice President) presented a token of appreciation to Mr Lim Sai Seong (QAV Director & TEEAM Assistant Honorary Secretary) after the briefing session. All smiles TEEAM members at OSRAM Opto Semiconductors. Happy hours Members networked after the QAV visit. 25

28

29 73rd ISSUE Wire & Tube Southeast Asia 2017 The Wire and Tube Southeast Asia 2017 the 12th International Wire and Cable Trade Fair for Southeast Asia and the 11th International Tube and Pipe Trade Fair for Southeast Asia, were successfully organised from 19th to 21st September 2017 at BITEC Bangkok, Thailand. The trade fairs were organised by Messe Düsseldorf Asia, a subsidiary of Messe Düsseldorf GmbH, one of the world s leading trade fair organisers. Wire and Tube Southeast Asia 2017 unveiled an all-encompassing exhibit range that was presented by 400 leading industry names from 30 countries of which 95% came from outside Thailand, as well as national pavilions and country groups from Austria, China, Germany, Italy, Taiwan, UK and USA. Testament to the trade fairs standing as the region s definitive sourcing and procurement platform for the industry, Wire and Tube Southeast Asia 2017 recorded a praiseworthy attendance of 8,458 trade visitors from 50 countries, with 39% coming from overseas, including visiting delegations from Vietnam, India, Japan, Thailand and Malaysia. The Opening of Wire and Tube Southeast Asia 2017 was officiated by Mr Kobchai Sungsitthisawad, Deputy Permanent Secretary, Ministry of Industry, Thailand. At the Opening Ceremony he shared that The timely staging of exhibitions like Wire and Tube Southeast Asia, help to bring forth new ideas, facilitate business deals and transactions, and also provide an environment for ideas and creative solutions to propagate thus paving the way for product manufacturers, raw material suppliers, components and equipment manufacturers plus technology innovators, to successfully gain their foothold in Thailand and the region. This vote of confidence was extended as participating exhibitors gave their best showings of expertise, technologies, machinery, innovations and know-how in fulfilling procurement and sourcing objectives tailored towards the current industry landscape. TEEAM was honoured to be invited as special guest to visit the trade fairs and was represented by Vice President, Ir Chang Yew Cheong. He shared that the trade fair brought a great opportunity for wire and tubes companies and manufacturers to be exposed to the latest range of products and technologies available in the market. Beyond the strong collaboration by international industry partners towards the trade fairs dynamic line-up, the three full-on days of action was augmented by concurrently held conference, seminar and technical presentations. Led by field experts and participating exhibitors, the concurrent events met with overwhelming response and were wellattended by over 300 trade attendees. Thailand is considered to be the central springboard for the up-andcoming markets of Southeast Asia due to a boom in the building, energy and automotive sectors. This makes Wire and Tube Southeast Asia the focal platform to information on the latest developments, equipment and machinery, where contacts for future business relations are made and deals are concluded. For 2019, Wire and Tube Southeast Asia 2019 will take place from 17th to 19th September 2019 at BITEC, Bangkok. To exhibit and/ or visit, please visit Ribbon Cutting Ceremony VIPs all set to mark the official opening of the trade fairs. All smiles VIPs at the Opening Ceremony. Guest of Honour Mr Kobchai Sungsitthisawad, Deputy Permanent Secretary, Ministry of Industry, Thailand delivering his keynote address. Show of support (left)teeam Vice President, Ir Chang Yew Cheong was a special guest. 27

30

31 73rd ISSUE Panel Discussion on The Importance of Electro-Safety Electricity plays a very major role in our daily lives. It drives our modern lifestyles and powers our world. Thus, it is extremely crucial to know how to manage it properly, and the most critical aspect is to learn about electrical safety. On 27th November 2017, Schneider Electric hosted a Panel Discussion at the Schneider Head Office in Petaling Jaya (on electrical safety topics) together with the Energy Commission (Suruhanjaya Tenaga, ST) and TEEAM. The platform was aimed at addressing electrical safety issues and the necessary precautionary measures to be taken in order to avoid any possible electrical accidents. TEEAM representative, Ir Chew Shee Fuee KMN (Immediate Past President) was present as one of the distinguished Panelists. According to ST, on average, there were 58 electrical accident cases which occurred every year in the country, with nearly 50% of the accidents resulting in untimely deaths. The Panel Discussion emphasised that safe and efficient use of electricity at home was important, in order to minimise the potential risks and possible accidents. Mr Soo Pow Leong, Country President of Schneider Malaysia, aptly highlighted that everyday behaviours are putting people in danger. He emphasised that it is not only important to use a certified electrician to keep our homes safe, but it was also vital to cut out the smaller risks that could still have devastating and fatal consequences. Electrical safety is crucial to keep users and their families, to be always safe. The Panel Discussion encouraged users to ensure the electrical system installed at their homes were up-to-date and most importantly, to ensure that regular checks are always performed by a certified electrician. Some critical recommendations included: Never use faulty electrical appliances. Make sure that all appliances have the approved regulatory compliance mark by SIRIM. Do not attempt to repair faulty electrical appliances and power points all by yourself. Always engage a certified electrician to do so. Avoid overloading the adaptors. For the album (from left) Mr Mazliazhar (Schneider Senior Product Marketing Engineer), Ms Iffah Hannah Muluk (ST Head of Electrical Safety Development Unit), Ir Chew Shee Fuee KMN (TEEAM Immediate Past President) and Ms Daphne Iking (Emcee-cum-TV Anchor). Keep electrics (leads and appliances) away from water as water can amplify the current shock. Unplug the appliances when you are not using them in order to reduce the risk of fire. Ms Iffah Hannah Muluk, the ST Head of Electrical Safety Development Unit, urged the public to pro-actively take charge of the safety of their families and homes. The Panel Discussion provided a timely platform to push for the importance of electrical safety as it is the responsibility of not only the homeowners but of everyone. All have a very important role to play in order to avoid electrical accidents from happening. The Panel concluded the discussion by providing helpful tips and recommendations for consumers that will help mitigate electrical accidents at homes and buildings. Another tip that was shared during the Panel was the importance of investing in high quality and reliable electrical components at homes, such as Schneider Electric s Easy9 RCBO which can detect as little as 10mA of electrical leakage. This 10mA RCD is a requirement by ST, to be installed in all homes for the water heater circuit. Demo (right) Ir Chew Shee Fuee KMN (TEEAM Immediate Past President) promotes the TEEAM Self-Test RCCB safety campaign for public awareness. Discussion time The Panelist explaining electrical safety at home, to the audience and Press members. 29

32

33 73rd ISSUE Wire & Cable Malaysia 2017 The Wire & Cable Malaysia 2017 Exhibition was held from 2nd to 4th November 2017 at the Kuala Lumpur Convention Centre. The exhibition was first conceptualised and organised in Vietnam, and it has now expanded its presence across a few major cities including Kuala Lumpur in Malaysia. Wire & Cable Malaysia 2017 was organised by the Century Exhibition Group, with partners from the Malaysia Cable Manufacturers Association (MCMA) and TEEAM. It was a good platform for TEEAM and some of the members to exhibit their products and services. Wire & Cable is one of the effective trade fairs the largest exhibition in Southeast Asia for the leading wire and cable manufacturers and suppliers, to promote their products in a prospective market. Visitors were exposed to various wire and cable products, fibre optics cables, electronic wires, cable accessories, testing instruments and all kinds of wire and cable materials. The exhibition provided an excellent platform and unique chance to gather the decision makers from all key sectors, over the duration of the three days show. Networking (from left) Mr Patrick Kee and Mr Vincent Lai of EITA, Mr Suresh Kumar Gorasia (TEEAM International Affairs Chairman & Past President) and Ir Chew Shee Fuee KMN (TEEAM Immediate Past President). Fellowship (from left) Mr Suresh Kumar Gorasia (TEEAM International Affairs Chairman & Past President), Mr Roger Lim (MD of One International Exhibitions) and Ir Chew Shee Fuee KMN (TEEAM Immediate Past President). Good attendance TEEAM Members posing at TEEAM s booth. Member s support Covis Sdn Bhd at TEEAM s booth. Showcase A cross-section of the exhibition area. Good exhibition platform TEEAM s booth. 31